[PATCH v8 10/10] Documentation: Add documentation for VDUSE

[Xie Yongji <xieyongji@bytedance.com>]

VDUSE (vDPA Device in Userspace) is a framework to support
implementing software-emulated vDPA devices in userspace. This
document is intended to clarify the VDUSE design and usage.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
---
 Documentation/userspace-api/index.rst |   1 +
 Documentation/userspace-api/vduse.rst | 222 ++++++++++++++++++++++++++++++++++
 2 files changed, 223 insertions(+)
 create mode 100644 Documentation/userspace-api/vduse.rst

diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index 0b5eefed027e..c432be070f67 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -27,6 +27,7 @@ place where this information is gathered.
    iommu
    media/index
    sysfs-platform_profile
+   vduse
 
 .. only::  subproject and html
 
diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst
new file mode 100644
index 000000000000..2f9cd1a4e530
--- /dev/null
+++ b/Documentation/userspace-api/vduse.rst
@@ -0,0 +1,222 @@
+==================================
+VDUSE - "vDPA Device in Userspace"
+==================================
+
+vDPA (virtio data path acceleration) device is a device that uses a
+datapath which complies with the virtio specifications with vendor
+specific control path. vDPA devices can be both physically located on
+the hardware or emulated by software. VDUSE is a framework that makes it
+possible to implement software-emulated vDPA devices in userspace. And
+to make it simple, the emulated vDPA device's control path is handled in
+the kernel and only the data path is implemented in the userspace.
+
+Note that only virtio block device is supported by VDUSE framework now,
+which can reduce security risks when the userspace process that implements
+the data path is run by an unprivileged user. The Support for other device
+types can be added after the security issue is clarified or fixed in the future.
+
+Start/Stop VDUSE devices
+------------------------
+
+VDUSE devices are started as follows:
+
+1. Create a new VDUSE instance with ioctl(VDUSE_CREATE_DEV) on
+   /dev/vduse/control.
+
+2. Begin processing VDUSE messages from /dev/vduse/$NAME. The first
+   messages will arrive while attaching the VDUSE instance to vDPA bus.
+
+3. Send the VDPA_CMD_DEV_NEW netlink message to attach the VDUSE
+   instance to vDPA bus.
+
+VDUSE devices are stopped as follows:
+
+1. Send the VDPA_CMD_DEV_DEL netlink message to detach the VDUSE
+   instance from vDPA bus.
+
+2. Close the file descriptor referring to /dev/vduse/$NAME
+
+3. Destroy the VDUSE instance with ioctl(VDUSE_DESTROY_DEV) on
+   /dev/vduse/control
+
+The netlink messages metioned above can be sent via vdpa tool in iproute2
+or use the below sample codes:
+
+.. code-block:: c
+
+	static int netlink_add_vduse(const char *name, enum vdpa_command cmd)
+	{
+		struct nl_sock *nlsock;
+		struct nl_msg *msg;
+		int famid;
+
+		nlsock = nl_socket_alloc();
+		if (!nlsock)
+			return -ENOMEM;
+
+		if (genl_connect(nlsock))
+			goto free_sock;
+
+		famid = genl_ctrl_resolve(nlsock, VDPA_GENL_NAME);
+		if (famid < 0)
+			goto close_sock;
+
+		msg = nlmsg_alloc();
+		if (!msg)
+			goto close_sock;
+
+		if (!genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, famid, 0, 0, cmd, 0))
+			goto nla_put_failure;
+
+		NLA_PUT_STRING(msg, VDPA_ATTR_DEV_NAME, name);
+		if (cmd == VDPA_CMD_DEV_NEW)
+			NLA_PUT_STRING(msg, VDPA_ATTR_MGMTDEV_DEV_NAME, "vduse");
+
+		if (nl_send_sync(nlsock, msg))
+			goto close_sock;
+
+		nl_close(nlsock);
+		nl_socket_free(nlsock);
+
+		return 0;
+	nla_put_failure:
+		nlmsg_free(msg);
+	close_sock:
+		nl_close(nlsock);
+	free_sock:
+		nl_socket_free(nlsock);
+		return -1;
+	}
+
+How VDUSE works
+---------------
+
+Since the emuldated vDPA device's control path is handled in the kernel,
+a message-based communication protocol and few types of control messages
+are introduced by VDUSE framework to make userspace be aware of the data
+path related changes:
+
+- VDUSE_GET_VQ_STATE: Get the state for virtqueue from userspace
+
+- VDUSE_START_DATAPLANE: Notify userspace to start the dataplane
+
+- VDUSE_STOP_DATAPLANE: Notify userspace to stop the dataplane
+
+- VDUSE_UPDATE_IOTLB: Notify userspace to update the memory mapping in device IOTLB
+
+Userspace needs to read()/write() on /dev/vduse/$NAME to receive/reply
+those control messages from/to VDUSE kernel module as follows:
+
+.. code-block:: c
+
+	static int vduse_message_handler(int dev_fd)
+	{
+		int len;
+		struct vduse_dev_request req;
+		struct vduse_dev_response resp;
+
+		len = read(dev_fd, &req, sizeof(req));
+		if (len != sizeof(req))
+			return -1;
+
+		resp.request_id = req.request_id;
+
+		switch (req.type) {
+
+		/* handle different types of message */
+
+		}
+
+		if (req.flags & VDUSE_REQ_FLAGS_NO_REPLY)
+			return 0;
+
+		len = write(dev_fd, &resp, sizeof(resp));
+		if (len != sizeof(resp))
+			return -1;
+
+		return 0;
+	}
+
+After VDUSE_START_DATAPLANE messages is received, userspace should start the
+dataplane processing with the help of some ioctls on /dev/vduse/$NAME:
+
+- VDUSE_IOTLB_GET_FD: get the file descriptor to the first overlapped iova region.
+  Userspace can access this iova region by passing fd and corresponding size, offset,
+  perm to mmap(). For example:
+
+.. code-block:: c
+
+	static int perm_to_prot(uint8_t perm)
+	{
+		int prot = 0;
+
+		switch (perm) {
+		case VDUSE_ACCESS_WO:
+			prot |= PROT_WRITE;
+			break;
+		case VDUSE_ACCESS_RO:
+			prot |= PROT_READ;
+			break;
+		case VDUSE_ACCESS_RW:
+			prot |= PROT_READ | PROT_WRITE;
+			break;
+		}
+
+		return prot;
+	}
+
+	static void *iova_to_va(int dev_fd, uint64_t iova, uint64_t *len)
+	{
+		int fd;
+		void *addr;
+		size_t size;
+		struct vduse_iotlb_entry entry;
+
+		entry.start = iova;
+		entry.last = iova + 1;
+		fd = ioctl(dev_fd, VDUSE_IOTLB_GET_FD, &entry);
+		if (fd < 0)
+			return NULL;
+
+		size = entry.last - entry.start + 1;
+		*len = entry.last - iova + 1;
+		addr = mmap(0, size, perm_to_prot(entry.perm), MAP_SHARED,
+			    fd, entry.offset);
+		close(fd);
+		if (addr == MAP_FAILED)
+			return NULL;
+
+		/* do something to cache this iova region */
+
+		return addr + iova - entry.start;
+	}
+
+- VDUSE_DEV_GET_FEATURES: Get the negotiated features
+
+- VDUSE_DEV_UPDATE_CONFIG: Update the configuration space and inject a config interrupt
+
+- VDUSE_VQ_GET_INFO: Get the specified virtqueue's metadata
+
+- VDUSE_VQ_SETUP_KICKFD: set the kickfd for virtqueue, this eventfd is used
+  by VDUSE kernel module to notify userspace to consume the vring.
+
+- VDUSE_INJECT_VQ_IRQ: inject an interrupt for specific virtqueue
+
+MMU-based IOMMU Driver
+----------------------
+
+VDUSE framework implements an MMU-based on-chip IOMMU driver to support
+mapping the kernel DMA buffer into the userspace iova region dynamically.
+This is mainly designed for virtio-vdpa case (kernel virtio drivers).
+
+The basic idea behind this driver is treating MMU (VA->PA) as IOMMU (IOVA->PA).
+The driver will set up MMU mapping instead of IOMMU mapping for the DMA transfer
+so that the userspace process is able to use its virtual address to access
+the DMA buffer in kernel.
+
+And to avoid security issue, a bounce-buffering mechanism is introduced to
+prevent userspace accessing the original buffer directly which may contain other
+kernel data. During the mapping, unmapping, the driver will copy the data from
+the original buffer to the bounce buffer and back, depending on the direction of
+the transfer. And the bounce-buffer addresses will be mapped into the user address
+space instead of the original one.
-- 
2.11.0