All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cristian Marussi <cristian.marussi@arm.com>
To: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	virtualization@lists.linux-foundation.org,
	virtio-dev@lists.oasis-open.org, sudeep.holla@arm.com,
	james.quinlan@broadcom.com, f.fainelli@gmail.com,
	etienne.carriere@linaro.org, vincent.guittot@linaro.org,
	souvik.chakravarty@arm.com, igor.skalkin@opensynergy.com,
	peter.hilber@opensynergy.com, alex.bennee@linaro.org,
	jean-philippe@linaro.org, mikhail.golubev@opensynergy.com,
	anton.yakovlev@opensynergy.com, Vasyl.Vavrychuk@opensynergy.com,
	Andriy.Tryshnivskyy@opensynergy.com
Subject: Re: [PATCH v4 03/16] firmware: arm_scmi: Add transport optional init/exit support
Date: Wed, 16 Jun 2021 10:04:36 +0100	[thread overview]
Message-ID: <20210616090436.GC35368@e120937-lin> (raw)
In-Reply-To: <20210614142956.000030f5@Huawei.com>

Hi Jonathan,

thanks for having a look at this series.

On Mon, Jun 14, 2021 at 02:29:56PM +0100, Jonathan Cameron wrote:
> On Fri, 11 Jun 2021 17:59:24 +0100
> Cristian Marussi <cristian.marussi@arm.com> wrote:
> 
> > Some SCMI transport could need to perform some transport specific setup
> > before they can be used by the SCMI core transport layer: typically this
> > early setup consists in registering with some other kernel subsystem.
> > 
> > Add the optional capability for a transport to provide a couple of .init
> > and .exit functions that are assured to be called early during the SCMI
> > core initialization phase, well before the SCMI core probing step.
> > 
> > [ Peter: Adapted RFC patch by Cristian for submission to upstream. ]
> > Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
> > [ Cristian: Fixed scmi_transports_exit point of invocation ]
> > Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> 
> Drive by comment inline.  Feel free to ignore ;)
> 
> Jonathan
> 
> > ---
> >  drivers/firmware/arm_scmi/common.h |  8 ++++
> >  drivers/firmware/arm_scmi/driver.c | 59 ++++++++++++++++++++++++++++++
> >  2 files changed, 67 insertions(+)
> > 
> > diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> > index 7c2b9fd7e929..6bb734e0e3ac 100644
> > --- a/drivers/firmware/arm_scmi/common.h
> > +++ b/drivers/firmware/arm_scmi/common.h
> > @@ -321,6 +321,12 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
> >  /**
> >   * struct scmi_desc - Description of SoC integration
> >   *
> > + * @init: An optional function that a transport can provide to initialize some
> > + *	  transport-specific setup during SCMI core initialization, so ahead of
> > + *	  SCMI core probing.
> > + * @exit: An optional function that a transport can provide to de-initialize
> > + *	  some transport-specific setup during SCMI core de-initialization, so
> > + *	  after SCMI core removal.
> >   * @ops: Pointer to the transport specific ops structure
> >   * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
> >   * @max_msg: Maximum number of messages that can be pending
> > @@ -328,6 +334,8 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
> >   * @max_msg_size: Maximum size of data per message that can be handled.
> >   */
> >  struct scmi_desc {
> > +	int (*init)(void);
> > +	void (*exit)(void);
> >  	const struct scmi_transport_ops *ops;
> >  	int max_rx_timeout_ms;
> >  	int max_msg;
> > diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> > index f15d75af87ea..20f8f0581f3a 100644
> > --- a/drivers/firmware/arm_scmi/driver.c
> > +++ b/drivers/firmware/arm_scmi/driver.c
> > @@ -1594,10 +1594,67 @@ static struct platform_driver scmi_driver = {
> >  	.remove = scmi_remove,
> >  };
> >  
> > +/**
> > + * __scmi_transports_setup  - Common helper to call transport-specific
> > + * .init/.exit code if provided.
> > + *
> > + * @init: A flag to distinguish between init and exit.
> > + *
> > + * Note that, if provided, we invoke .init/.exit functions for all the
> > + * transports currently compiled in.
> > + *
> > + * Return: 0 on Success.
> > + */
> > +static inline int __scmi_transports_setup(bool init)
> > +{
> > +	int ret = 0;
> > +	const struct of_device_id *trans;
> > +
> > +	for (trans = scmi_of_match; trans->data; trans++) {
> > +		const struct scmi_desc *tdesc = trans->data;
> > +
> > +		if ((init && !tdesc->init) || (!init && !tdesc->exit))
> > +			continue;
> > +
> > +		pr_debug("SCMI %sInitializing %s transport\n",
> > +			 init ? "" : "De-", trans->compatible);
> 
> Clever formatting can makes grepping for messages harder.
> 
> Perhaps
> 		if (init)
> 			pr_debug("SCMI Initializing %s transport\n",
> 				 trans->compatible);
> 		else
> 			pr_debug("SCMI Deinitializing %s transport\n",
> 				 trans->compatible);
> 
> would be nicer even though it burns some lines. Also avoids somewhat
> ugly capitalization : De-Initializing xxx transport.
> 
> You could combine it with the convenient if(init) below
> 

Right, I'll rework to avoid issues grepping.

Thanks,
Cristian


WARNING: multiple messages have this Message-ID (diff)
From: Cristian Marussi <cristian.marussi@arm.com>
To: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	virtualization@lists.linux-foundation.org,
	virtio-dev@lists.oasis-open.org, sudeep.holla@arm.com,
	james.quinlan@broadcom.com, f.fainelli@gmail.com,
	etienne.carriere@linaro.org, vincent.guittot@linaro.org,
	souvik.chakravarty@arm.com, igor.skalkin@opensynergy.com,
	peter.hilber@opensynergy.com, alex.bennee@linaro.org,
	jean-philippe@linaro.org, mikhail.golubev@opensynergy.com,
	anton.yakovlev@opensynergy.com, Vasyl.Vavrychuk@opensynergy.com,
	Andriy.Tryshnivskyy@opensynergy.com
Subject: Re: [PATCH v4 03/16] firmware: arm_scmi: Add transport optional init/exit support
Date: Wed, 16 Jun 2021 10:04:36 +0100	[thread overview]
Message-ID: <20210616090436.GC35368@e120937-lin> (raw)
In-Reply-To: <20210614142956.000030f5@Huawei.com>

Hi Jonathan,

thanks for having a look at this series.

On Mon, Jun 14, 2021 at 02:29:56PM +0100, Jonathan Cameron wrote:
> On Fri, 11 Jun 2021 17:59:24 +0100
> Cristian Marussi <cristian.marussi@arm.com> wrote:
> 
> > Some SCMI transport could need to perform some transport specific setup
> > before they can be used by the SCMI core transport layer: typically this
> > early setup consists in registering with some other kernel subsystem.
> > 
> > Add the optional capability for a transport to provide a couple of .init
> > and .exit functions that are assured to be called early during the SCMI
> > core initialization phase, well before the SCMI core probing step.
> > 
> > [ Peter: Adapted RFC patch by Cristian for submission to upstream. ]
> > Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
> > [ Cristian: Fixed scmi_transports_exit point of invocation ]
> > Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> 
> Drive by comment inline.  Feel free to ignore ;)
> 
> Jonathan
> 
> > ---
> >  drivers/firmware/arm_scmi/common.h |  8 ++++
> >  drivers/firmware/arm_scmi/driver.c | 59 ++++++++++++++++++++++++++++++
> >  2 files changed, 67 insertions(+)
> > 
> > diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> > index 7c2b9fd7e929..6bb734e0e3ac 100644
> > --- a/drivers/firmware/arm_scmi/common.h
> > +++ b/drivers/firmware/arm_scmi/common.h
> > @@ -321,6 +321,12 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
> >  /**
> >   * struct scmi_desc - Description of SoC integration
> >   *
> > + * @init: An optional function that a transport can provide to initialize some
> > + *	  transport-specific setup during SCMI core initialization, so ahead of
> > + *	  SCMI core probing.
> > + * @exit: An optional function that a transport can provide to de-initialize
> > + *	  some transport-specific setup during SCMI core de-initialization, so
> > + *	  after SCMI core removal.
> >   * @ops: Pointer to the transport specific ops structure
> >   * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
> >   * @max_msg: Maximum number of messages that can be pending
> > @@ -328,6 +334,8 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
> >   * @max_msg_size: Maximum size of data per message that can be handled.
> >   */
> >  struct scmi_desc {
> > +	int (*init)(void);
> > +	void (*exit)(void);
> >  	const struct scmi_transport_ops *ops;
> >  	int max_rx_timeout_ms;
> >  	int max_msg;
> > diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> > index f15d75af87ea..20f8f0581f3a 100644
> > --- a/drivers/firmware/arm_scmi/driver.c
> > +++ b/drivers/firmware/arm_scmi/driver.c
> > @@ -1594,10 +1594,67 @@ static struct platform_driver scmi_driver = {
> >  	.remove = scmi_remove,
> >  };
> >  
> > +/**
> > + * __scmi_transports_setup  - Common helper to call transport-specific
> > + * .init/.exit code if provided.
> > + *
> > + * @init: A flag to distinguish between init and exit.
> > + *
> > + * Note that, if provided, we invoke .init/.exit functions for all the
> > + * transports currently compiled in.
> > + *
> > + * Return: 0 on Success.
> > + */
> > +static inline int __scmi_transports_setup(bool init)
> > +{
> > +	int ret = 0;
> > +	const struct of_device_id *trans;
> > +
> > +	for (trans = scmi_of_match; trans->data; trans++) {
> > +		const struct scmi_desc *tdesc = trans->data;
> > +
> > +		if ((init && !tdesc->init) || (!init && !tdesc->exit))
> > +			continue;
> > +
> > +		pr_debug("SCMI %sInitializing %s transport\n",
> > +			 init ? "" : "De-", trans->compatible);
> 
> Clever formatting can makes grepping for messages harder.
> 
> Perhaps
> 		if (init)
> 			pr_debug("SCMI Initializing %s transport\n",
> 				 trans->compatible);
> 		else
> 			pr_debug("SCMI Deinitializing %s transport\n",
> 				 trans->compatible);
> 
> would be nicer even though it burns some lines. Also avoids somewhat
> ugly capitalization : De-Initializing xxx transport.
> 
> You could combine it with the convenient if(init) below
> 

Right, I'll rework to avoid issues grepping.

Thanks,
Cristian


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-06-16  9:04 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-11 16:59 [PATCH v4 00/16] Introduce SCMI VirtIO transport Cristian Marussi
2021-06-11 16:59 ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 01/16] firmware: arm_scmi: Fix max pending messages boundary check Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-07-01  8:42   ` Peter Hilber
2021-07-01  8:42     ` [virtio-dev] " Peter Hilber
2021-07-01  8:42     ` Peter Hilber
2021-07-01 10:04     ` Cristian Marussi
2021-07-01 10:04       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 02/16] firmware: arm_scmi: Add support for type handling in common functions Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 03/16] firmware: arm_scmi: Add transport optional init/exit support Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-14 13:29   ` Jonathan Cameron
2021-06-14 13:29     ` Jonathan Cameron
2021-06-16  9:04     ` Cristian Marussi [this message]
2021-06-16  9:04       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 04/16] firmware: arm_scmi: Introduce monotonically increasing tokens Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-14 13:53   ` Jonathan Cameron
2021-06-14 13:53     ` Jonathan Cameron
2021-06-16  9:11     ` Cristian Marussi
2021-06-16  9:11       ` Cristian Marussi
2021-07-01  8:42   ` Peter Hilber
2021-07-01  8:42     ` [virtio-dev] " Peter Hilber
2021-07-01  8:42     ` Peter Hilber
2021-07-01 10:16     ` Cristian Marussi
2021-07-01 10:16       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 05/16] firmware: arm_scmi: Introduce delegated xfers support Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-07-01  8:42   ` Peter Hilber
2021-07-01  8:42     ` [virtio-dev] " Peter Hilber
2021-07-01  8:42     ` Peter Hilber
2021-07-01 10:24     ` Cristian Marussi
2021-07-01 10:24       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 06/16] firmware: arm_scmi, smccc, mailbox: Make shmem based transports optional Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-07-01  8:42   ` Peter Hilber
2021-07-01  8:42     ` [virtio-dev] " Peter Hilber
2021-07-01  8:42     ` Peter Hilber
2021-07-01 10:27     ` Cristian Marussi
2021-07-01 10:27       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 07/16] firmware: arm_scmi: Add op to override max message # Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-14 14:04   ` Jonathan Cameron
2021-06-14 14:04     ` Jonathan Cameron
2021-06-16  9:13     ` Cristian Marussi
2021-06-16  9:13       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 08/16] [RFC][REWORK] " Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 09/16] firmware: arm_scmi: Add optional link_supplier() transport op Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 10/16] firmware: arm_scmi: Add per-device transport private info Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 11/16] firmware: arm_scmi: Add is_scmi_protocol_device() Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 12/16] firmware: arm_scmi: Add message passing abstractions for transports Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-14 14:10   ` Jonathan Cameron
2021-06-14 14:10     ` Jonathan Cameron
2021-06-16  9:14     ` Cristian Marussi
2021-06-16  9:14       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 13/16] dt-bindings: arm: Add virtio transport for SCMI Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-24 19:22   ` Rob Herring
2021-06-24 19:22     ` Rob Herring
2021-06-24 19:22     ` Rob Herring
2021-07-01  8:43   ` Peter Hilber
2021-07-01  8:43     ` [virtio-dev] " Peter Hilber
2021-07-01  8:43     ` Peter Hilber
2021-07-01 10:31     ` Cristian Marussi
2021-07-01 10:31       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 14/16] firmware: arm_scmi: Add virtio transport Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-14 14:23   ` Jonathan Cameron
2021-06-14 14:23     ` Jonathan Cameron
2021-06-16 10:18     ` Cristian Marussi
2021-06-16 10:18       ` Cristian Marussi
2021-07-01  8:43   ` Peter Hilber
2021-07-01  8:43     ` [virtio-dev] " Peter Hilber
2021-07-01  8:43     ` Peter Hilber
2021-07-01 10:34     ` Cristian Marussi
2021-07-01 10:34       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 15/16] [RFC][REWORK] firmware: arm_scmi: make virtio-scmi use delegated xfers Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-07-01  8:43   ` Peter Hilber
2021-07-01  8:43     ` [virtio-dev] " Peter Hilber
2021-07-01  8:43     ` Peter Hilber
2021-07-01 11:26     ` Cristian Marussi
2021-07-01 11:26       ` Cristian Marussi
2021-06-11 16:59 ` [PATCH v4 16/16] firmware: arm_scmi: Add polling mode to virtio transport Cristian Marussi
2021-06-11 16:59   ` Cristian Marussi
2021-06-14 11:43 ` [PATCH v4 00/16] Introduce SCMI VirtIO transport Christoph Hellwig
2021-06-14 11:43   ` Christoph Hellwig
2021-06-14 11:43   ` Christoph Hellwig
2021-06-14 14:03   ` Cristian Marussi
2021-06-14 14:03     ` Cristian Marussi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210616090436.GC35368@e120937-lin \
    --to=cristian.marussi@arm.com \
    --cc=Andriy.Tryshnivskyy@opensynergy.com \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=Vasyl.Vavrychuk@opensynergy.com \
    --cc=alex.bennee@linaro.org \
    --cc=anton.yakovlev@opensynergy.com \
    --cc=etienne.carriere@linaro.org \
    --cc=f.fainelli@gmail.com \
    --cc=igor.skalkin@opensynergy.com \
    --cc=james.quinlan@broadcom.com \
    --cc=jean-philippe@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mikhail.golubev@opensynergy.com \
    --cc=peter.hilber@opensynergy.com \
    --cc=souvik.chakravarty@arm.com \
    --cc=sudeep.holla@arm.com \
    --cc=vincent.guittot@linaro.org \
    --cc=virtio-dev@lists.oasis-open.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.