All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: linux-can@vger.kernel.org
Cc: kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>,
	Stephane Grosjean <s.grosjean@peak-system.com>
Subject: [can-next-rfc 8/9] can: peak_pci: fix checkpatch warnings
Date: Wed, 16 Jun 2021 12:28:10 +0200	[thread overview]
Message-ID: <20210616102811.2449426-9-mkl@pengutronix.de> (raw)
In-Reply-To: <20210616102811.2449426-1-mkl@pengutronix.de>

This patch cleans several checkpatch warnings in the peak_pci driver.

Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/sja1000/peak_pci.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 5fec26c6df42..aff8a1dee135 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -152,12 +152,14 @@ static void peak_pci_write_reg(const struct sja1000_priv *priv,
 static inline void pita_set_scl_highz(struct peak_pciec_card *card)
 {
 	u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL;
+
 	writeb(gp_outen, card->cfg_base + PITA_GPOEN);
 }
 
 static inline void pita_set_sda_highz(struct peak_pciec_card *card)
 {
 	u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA;
+
 	writeb(gp_outen, card->cfg_base + PITA_GPOEN);
 }
 
@@ -242,7 +244,7 @@ static int peak_pciec_write_pca9553(struct peak_pciec_card *card,
 	int ret;
 
 	/* cache led mask */
-	if ((offset == 5) && (data == card->led_cache))
+	if (offset == 5 && data == card->led_cache)
 		return 0;
 
 	ret = i2c_transfer(&card->led_chip, &msg, 1);
@@ -424,7 +426,7 @@ static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev)
 	/* channel is the first one: do the init part */
 	} else {
 		/* create the bit banging I2C adapter structure */
-		card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL);
+		card = kzalloc(sizeof(*card), GFP_KERNEL);
 		if (!card)
 			return -ENOMEM;
 
-- 
2.30.2



  parent reply	other threads:[~2021-06-16 10:28 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16 10:28 [RFC]: can-next 2021-06-16 - j1939, m_can, peak_pci Marc Kleine-Budde
2021-06-16 10:28 ` [can-next-rfc 1/9] can: j1939: fix checkpatch warnings Marc Kleine-Budde
2021-06-16 10:28 ` [can-next-rfc 2/9] can: j1939: replace fall through comment by fallthrough pseudo-keyword Marc Kleine-Budde
2021-06-16 10:28 ` [can-next-rfc 3/9] can: j1939: j1939_session_completed(): use consistent name se_skb for the session skb Marc Kleine-Budde
2021-06-16 10:28 ` [can-next-rfc 4/9] can: j1939: j1939_session_tx_dat(): use consistent name se_skcb for session skb control buffer Marc Kleine-Budde
2021-06-16 10:28 ` [can-next-rfc 5/9] can: j1939: j1939_xtp_rx_dat_one(): use separate pointer " Marc Kleine-Budde
2021-06-16 10:28 ` [can-next-rfc 6/9] can: m_can: remove support for custom bit timing Marc Kleine-Budde
2021-06-16 10:28 ` [can-next-rfc 7/9] can: peak_pci: convert comments to network style comments Marc Kleine-Budde
2021-06-16 10:28 ` Marc Kleine-Budde [this message]
2021-06-16 10:28 ` [can-next-rfc 9/9] can: peak_pci: Add name and FW version of the card in kernel buffer Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210616102811.2449426-9-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=s.grosjean@peak-system.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.