All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
@ 2021-06-11 11:10 Sudeep Holla
  2021-06-16 17:34 ` Rob Herring
  0 siblings, 1 reply; 3+ messages in thread
From: Sudeep Holla @ 2021-06-11 11:10 UTC (permalink / raw)
  To: devicetree, Rob Herring; +Cc: Sudeep Holla, Rob Herring, Linus Walleij

Convert the ARM VIC binding document to DT schema format using
json-schema.

Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 .../bindings/interrupt-controller/arm,vic.txt | 41 --------
 .../interrupt-controller/arm,vic.yaml         | 93 +++++++++++++++++++
 2 files changed, 93 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml

v1->v2:
	- Added arm,versatile-vic to the list of compatibles as suggested
	  by Linus W and added his review tag
	- Updated the SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
	  Original txt file doesn't carry anything and is not sure about
	  it, but just followed what I have done with scmi/scpi ones

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
deleted file mode 100644
index dd527216c5fb..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* ARM Vectored Interrupt Controller
-
-One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
-system for interrupt routing.  For multiple controllers they can either be
-nested or have the outputs wire-OR'd together.
-
-Required properties:
-
-- compatible : should be one of
-	"arm,pl190-vic"
-	"arm,pl192-vic"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : The number of cells to define the interrupts.  Must be 1 as
-  the VIC has no configuration options for interrupt sources.  The cell is a u32
-  and defines the interrupt number.
-- reg : The register bank for the VIC.
-
-Optional properties:
-
-- interrupts : Interrupt source for parent controllers if the VIC is nested.
-- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
-  represents single interrupt source, starting from source 0 at LSb and ending
-  at source 31 at MSb. A bit that is set means that the source is wired and
-  clear means otherwise. If unspecified, defaults to all valid.
-- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
-  configured as wake up source for the system. Order of bits is the same as for
-  valid-mask property. A set bit means that this interrupt source can be
-  configured as a wake up source for the system. If unspecied, defaults to all
-  interrupt sources configurable as wake up sources.
-
-Example:
-
-	vic0: interrupt-controller@60000 {
-		compatible = "arm,pl192-vic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x60000 0x1000>;
-
-		valid-mask = <0xffffff7f>;
-		valid-wakeup-mask = <0x0000ff7f>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
new file mode 100644
index 000000000000..60576bf14b43
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Vectored Interrupt Controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  One or more Vectored Interrupt Controllers (VIC's) can be connected in an
+  ARM system for interrupt routing.  For multiple controllers they can either
+  be nested or have the outputs wire-OR'd together.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: arm,pl190-vic
+      - const: arm,pl192-vic
+      - const: arm,versatile-vic
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      The number of cells to define the interrupts.  It must be 1 as the
+      VIC has no configuration options for interrupt sources. The single
+      cell defines the interrupt number.
+
+  reg:
+    description: The register bank for the VIC.
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt source for the parent interrupt controller if the VIC
+      is nested.
+    maxItems: 1
+
+  interrupts-extended:
+    description:
+      Interrupt source for the parent interrupt controllers if the VIC
+      is nested.
+    maxItems: 1
+
+  valid-mask:
+    description:
+      A one cell big bit mask of valid interrupt sources. Each bit
+      represents single interrupt source, starting from source 0 at
+      LSb and ending at source 31 at MSb. A bit that is set means
+      that the source is wired and clear means otherwise. If unspecified,
+      defaults to all valid.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maxItems: 1
+
+  valid-wakeup-mask:
+    description:
+      A one cell big bit mask of interrupt sources that can be configured
+      as wake up source for the system. Order of bits is the same as for
+      valid-mask property. A set bit means that this interrupt source
+      can be configured as a wake up source for the system. If unspecied,
+      defaults to all interrupt sources configurable as wake up sources.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // GICv1
+    vic0: interrupt-controller@60000 {
+      compatible = "arm,pl192-vic";
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      reg = <0x60000 0x1000>;
+
+      valid-mask = <0xffffff7f>;
+      valid-wakeup-mask = <0x0000ff7f>;
+    };
+
+...
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
  2021-06-11 11:10 [PATCH v2] dt-bindings: interrupt-controller: Convert ARM VIC to json-schema Sudeep Holla
@ 2021-06-16 17:34 ` Rob Herring
  2021-06-16 17:53   ` Sudeep Holla
  0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2021-06-16 17:34 UTC (permalink / raw)
  To: Sudeep Holla; +Cc: devicetree, Linus Walleij

On Fri, Jun 11, 2021 at 12:10:33PM +0100, Sudeep Holla wrote:
> Convert the ARM VIC binding document to DT schema format using
> json-schema.
> 
> Cc: Rob Herring <robh@kernel.org>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
>  .../bindings/interrupt-controller/arm,vic.txt | 41 --------
>  .../interrupt-controller/arm,vic.yaml         | 93 +++++++++++++++++++
>  2 files changed, 93 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
> 
> v1->v2:
> 	- Added arm,versatile-vic to the list of compatibles as suggested
> 	  by Linus W and added his review tag
> 	- Updated the SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> 	  Original txt file doesn't carry anything and is not sure about
> 	  it, but just followed what I have done with scmi/scpi ones

It's default GPL-2.0, so you'd need permission to dual license.

> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
> deleted file mode 100644
> index dd527216c5fb..000000000000
> --- a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -* ARM Vectored Interrupt Controller
> -
> -One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
> -system for interrupt routing.  For multiple controllers they can either be
> -nested or have the outputs wire-OR'd together.
> -
> -Required properties:
> -
> -- compatible : should be one of
> -	"arm,pl190-vic"
> -	"arm,pl192-vic"
> -- interrupt-controller : Identifies the node as an interrupt controller
> -- #interrupt-cells : The number of cells to define the interrupts.  Must be 1 as
> -  the VIC has no configuration options for interrupt sources.  The cell is a u32
> -  and defines the interrupt number.
> -- reg : The register bank for the VIC.
> -
> -Optional properties:
> -
> -- interrupts : Interrupt source for parent controllers if the VIC is nested.
> -- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
> -  represents single interrupt source, starting from source 0 at LSb and ending
> -  at source 31 at MSb. A bit that is set means that the source is wired and
> -  clear means otherwise. If unspecified, defaults to all valid.
> -- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
> -  configured as wake up source for the system. Order of bits is the same as for
> -  valid-mask property. A set bit means that this interrupt source can be
> -  configured as a wake up source for the system. If unspecied, defaults to all
> -  interrupt sources configurable as wake up sources.
> -
> -Example:
> -
> -	vic0: interrupt-controller@60000 {
> -		compatible = "arm,pl192-vic";
> -		interrupt-controller;
> -		#interrupt-cells = <1>;
> -		reg = <0x60000 0x1000>;
> -
> -		valid-mask = <0xffffff7f>;
> -		valid-wakeup-mask = <0x0000ff7f>;
> -	};
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
> new file mode 100644
> index 000000000000..60576bf14b43
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/arm,vic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARM Vectored Interrupt Controller
> +
> +maintainers:
> +  - Rob Herring <robh@kernel.org>
> +
> +description: |+
> +  One or more Vectored Interrupt Controllers (VIC's) can be connected in an
> +  ARM system for interrupt routing.  For multiple controllers they can either
> +  be nested or have the outputs wire-OR'd together.
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: arm,pl190-vic
> +      - const: arm,pl192-vic
> +      - const: arm,versatile-vic

Use enum instead of oneOf+const

> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 1
> +    description:
> +      The number of cells to define the interrupts.  It must be 1 as the
> +      VIC has no configuration options for interrupt sources. The single
> +      cell defines the interrupt number.
> +
> +  reg:
> +    description: The register bank for the VIC.

Drop. That's every 'reg' ...

> +    maxItems: 1
> +
> +  interrupts:
> +    description:
> +      Interrupt source for the parent interrupt controller if the VIC
> +      is nested.

Drop.

> +    maxItems: 1
> +
> +  interrupts-extended:

Don't need this. The tooling will add it for any 'interrupts' property.

> +    description:
> +      Interrupt source for the parent interrupt controllers if the VIC
> +      is nested.
> +    maxItems: 1
> +
> +  valid-mask:
> +    description:
> +      A one cell big bit mask of valid interrupt sources. Each bit
> +      represents single interrupt source, starting from source 0 at
> +      LSb and ending at source 31 at MSb. A bit that is set means
> +      that the source is wired and clear means otherwise. If unspecified,
> +      defaults to all valid.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maxItems: 1

Drop. It's not an array.

> +
> +  valid-wakeup-mask:
> +    description:
> +      A one cell big bit mask of interrupt sources that can be configured
> +      as wake up source for the system. Order of bits is the same as for
> +      valid-mask property. A set bit means that this interrupt source
> +      can be configured as a wake up source for the system. If unspecied,
> +      defaults to all interrupt sources configurable as wake up sources.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maxItems: 1

Drop.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    // GICv1

GIC?

> +    vic0: interrupt-controller@60000 {
> +      compatible = "arm,pl192-vic";
> +      interrupt-controller;
> +      #interrupt-cells = <1>;
> +      reg = <0x60000 0x1000>;
> +
> +      valid-mask = <0xffffff7f>;
> +      valid-wakeup-mask = <0x0000ff7f>;
> +    };
> +
> +...
> -- 
> 2.25.1

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
  2021-06-16 17:34 ` Rob Herring
@ 2021-06-16 17:53   ` Sudeep Holla
  0 siblings, 0 replies; 3+ messages in thread
From: Sudeep Holla @ 2021-06-16 17:53 UTC (permalink / raw)
  To: Rob Herring; +Cc: devicetree, Linus Walleij, Sudeep Holla

On Wed, Jun 16, 2021 at 11:34:59AM -0600, Rob Herring wrote:
> On Fri, Jun 11, 2021 at 12:10:33PM +0100, Sudeep Holla wrote:
> > Convert the ARM VIC binding document to DT schema format using
> > json-schema.
> > 
> > Cc: Rob Herring <robh@kernel.org>
> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> > ---
> >  .../bindings/interrupt-controller/arm,vic.txt | 41 --------
> >  .../interrupt-controller/arm,vic.yaml         | 93 +++++++++++++++++++
> >  2 files changed, 93 insertions(+), 41 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
> > 
> > v1->v2:
> > 	- Added arm,versatile-vic to the list of compatibles as suggested
> > 	  by Linus W and added his review tag
> > 	- Updated the SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > 	  Original txt file doesn't carry anything and is not sure about
> > 	  it, but just followed what I have done with scmi/scpi ones
> 
> It's default GPL-2.0, so you'd need permission to dual license.
>

You are the author 😉, so it's really up to you.

[...]

All comments taken, will be fixed in next version.

> GIC?
>

Sorry I am so not use to VIC 😄

--
Regards,
Sudeep

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-06-16 17:54 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-11 11:10 [PATCH v2] dt-bindings: interrupt-controller: Convert ARM VIC to json-schema Sudeep Holla
2021-06-16 17:34 ` Rob Herring
2021-06-16 17:53   ` Sudeep Holla

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.