[PATCH v1] mtd: spi-nor-ids: Add support for XMC XM25QH64C

[PATCH v1] mtd: spi-nor-ids: Add support for XMC XM25QH64C

[Reto Schneider]

From: Reto Schneider <reto.schneider@husqvarnagroup.com>

This chip has been (briefly) tested on the MediaTek MT7688 based GARDENA
smart gateway.

Datasheet: http://xmcwh.com/Uploads/2020-12-17/XM25QH64C_Ver1.1.pdf
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>

---

 drivers/mtd/spi/spi-nor-ids.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 2b57797954..b91be10fc3 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -335,6 +335,7 @@ const struct flash_info spi_nor_ids[] = {
 #ifdef CONFIG_SPI_FLASH_XMC
 	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
 	{ INFO("XM25QH64A", 0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ INFO("XM25QH64C", 0x204017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ INFO("XM25QH128A", 0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 #endif
 	{ },
-- 
2.30.2

Re: [PATCH v1] mtd: spi-nor-ids: Add support for XMC XM25QH64C

[Stefan Roese]

On 17.06.21 18:26, Reto Schneider wrote:
> From: Reto Schneider <reto.schneider@husqvarnagroup.com>
> 
> This chip has been (briefly) tested on the MediaTek MT7688 based GARDENA
> smart gateway.
> 
> Datasheet: http://xmcwh.com/Uploads/2020-12-17/XM25QH64C_Ver1.1.pdf
> Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan


> ---
> 
>   drivers/mtd/spi/spi-nor-ids.c | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
> index 2b57797954..b91be10fc3 100644
> --- a/drivers/mtd/spi/spi-nor-ids.c
> +++ b/drivers/mtd/spi/spi-nor-ids.c
> @@ -335,6 +335,7 @@ const struct flash_info spi_nor_ids[] = {
>   #ifdef CONFIG_SPI_FLASH_XMC
>   	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
>   	{ INFO("XM25QH64A", 0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> +	{ INFO("XM25QH64C", 0x204017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>   	{ INFO("XM25QH128A", 0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>   #endif
>   	{ },
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

Re: [PATCH v1] mtd: spi-nor-ids: Add support for XMC XM25QH64C

[Jagan Teki]

On Thu, Jun 17, 2021 at 9:57 PM Reto Schneider <code@reto-schneider.ch> wrote:
>
> From: Reto Schneider <reto.schneider@husqvarnagroup.com>
>
> This chip has been (briefly) tested on the MediaTek MT7688 based GARDENA
> smart gateway.
>
> Datasheet: http://xmcwh.com/Uploads/2020-12-17/XM25QH64C_Ver1.1.pdf
> Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
>

Applied to u-boot-spi/master