All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joao Martins <joao.m.martins@oracle.com>
To: linux-mm@kvack.org
Cc: Dan Williams <dan.j.williams@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	Dave Jiang <dave.jiang@intel.com>,
	Naoya Horiguchi <naoya.horiguchi@nec.com>,
	Matthew Wilcox <willy@infradead.org>,
	Jason Gunthorpe <jgg@ziepe.ca>,
	John Hubbard <jhubbard@nvidia.com>,
	Jane Chu <jane.chu@oracle.com>,
	Muchun Song <songmuchun@bytedance.com>,
	Mike Kravetz <mike.kravetz@oracle.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Jonathan Corbet <corbet@lwn.net>,
	nvdimm@lists.linux.dev, linux-doc@vger.kernel.org,
	Joao Martins <joao.m.martins@oracle.com>
Subject: [PATCH v2 07/14] mm/hugetlb_vmemmap: move comment block to Documentation/vm
Date: Thu, 17 Jun 2021 19:45:00 +0100	[thread overview]
Message-ID: <20210617184507.3662-8-joao.m.martins@oracle.com> (raw)
In-Reply-To: <20210617184507.3662-1-joao.m.martins@oracle.com>

In preparation for device-dax for using hugetlbfs compound page tail
deduplication technique, move the comment block explanation into a
common place in Documentation/vm.

Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
---
 Documentation/vm/compound_pagemaps.rst | 170 +++++++++++++++++++++++++
 Documentation/vm/index.rst             |   1 +
 mm/hugetlb_vmemmap.c                   | 162 +----------------------
 3 files changed, 172 insertions(+), 161 deletions(-)
 create mode 100644 Documentation/vm/compound_pagemaps.rst

diff --git a/Documentation/vm/compound_pagemaps.rst b/Documentation/vm/compound_pagemaps.rst
new file mode 100644
index 000000000000..6b1af50e8201
--- /dev/null
+++ b/Documentation/vm/compound_pagemaps.rst
@@ -0,0 +1,170 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _commpound_pagemaps:
+
+==================================
+Free some vmemmap pages of HugeTLB
+==================================
+
+The struct page structures (page structs) are used to describe a physical
+page frame. By default, there is a one-to-one mapping from a page frame to
+it's corresponding page struct.
+
+HugeTLB pages consist of multiple base page size pages and is supported by
+many architectures. See hugetlbpage.rst in the Documentation directory for
+more details. On the x86-64 architecture, HugeTLB pages of size 2MB and 1GB
+are currently supported. Since the base page size on x86 is 4KB, a 2MB
+HugeTLB page consists of 512 base pages and a 1GB HugeTLB page consists of
+4096 base pages. For each base page, there is a corresponding page struct.
+
+Within the HugeTLB subsystem, only the first 4 page structs are used to
+contain unique information about a HugeTLB page. __NR_USED_SUBPAGE provides
+this upper limit. The only 'useful' information in the remaining page structs
+is the compound_head field, and this field is the same for all tail pages.
+
+By removing redundant page structs for HugeTLB pages, memory can be returned
+to the buddy allocator for other uses.
+
+Different architectures support different HugeTLB pages. For example, the
+following table is the HugeTLB page size supported by x86 and arm64
+architectures. Because arm64 supports 4k, 16k, and 64k base pages and
+supports contiguous entries, so it supports many kinds of sizes of HugeTLB
+page.
+
++--------------+-----------+-----------------------------------------------+
+| Architecture | Page Size |                HugeTLB Page Size              |
++--------------+-----------+-----------+-----------+-----------+-----------+
+|    x86-64    |    4KB    |    2MB    |    1GB    |           |           |
++--------------+-----------+-----------+-----------+-----------+-----------+
+|              |    4KB    |   64KB    |    2MB    |    32MB   |    1GB    |
+|              +-----------+-----------+-----------+-----------+-----------+
+|    arm64     |   16KB    |    2MB    |   32MB    |     1GB   |           |
+|              +-----------+-----------+-----------+-----------+-----------+
+|              |   64KB    |    2MB    |  512MB    |    16GB   |           |
++--------------+-----------+-----------+-----------+-----------+-----------+
+
+When the system boot up, every HugeTLB page has more than one struct page
+structs which size is (unit: pages):
+
+   struct_size = HugeTLB_Size / PAGE_SIZE * sizeof(struct page) / PAGE_SIZE
+
+Where HugeTLB_Size is the size of the HugeTLB page. We know that the size
+of the HugeTLB page is always n times PAGE_SIZE. So we can get the following
+relationship.
+
+   HugeTLB_Size = n * PAGE_SIZE
+
+Then,
+
+   struct_size = n * PAGE_SIZE / PAGE_SIZE * sizeof(struct page) / PAGE_SIZE
+               = n * sizeof(struct page) / PAGE_SIZE
+
+We can use huge mapping at the pud/pmd level for the HugeTLB page.
+
+For the HugeTLB page of the pmd level mapping, then
+
+   struct_size = n * sizeof(struct page) / PAGE_SIZE
+               = PAGE_SIZE / sizeof(pte_t) * sizeof(struct page) / PAGE_SIZE
+               = sizeof(struct page) / sizeof(pte_t)
+               = 64 / 8
+               = 8 (pages)
+
+Where n is how many pte entries which one page can contains. So the value of
+n is (PAGE_SIZE / sizeof(pte_t)).
+
+This optimization only supports 64-bit system, so the value of sizeof(pte_t)
+is 8. And this optimization also applicable only when the size of struct page
+is a power of two. In most cases, the size of struct page is 64 bytes (e.g.
+x86-64 and arm64). So if we use pmd level mapping for a HugeTLB page, the
+size of struct page structs of it is 8 page frames which size depends on the
+size of the base page.
+
+For the HugeTLB page of the pud level mapping, then
+
+   struct_size = PAGE_SIZE / sizeof(pmd_t) * struct_size(pmd)
+               = PAGE_SIZE / 8 * 8 (pages)
+               = PAGE_SIZE (pages)
+
+Where the struct_size(pmd) is the size of the struct page structs of a
+HugeTLB page of the pmd level mapping.
+
+E.g.: A 2MB HugeTLB page on x86_64 consists in 8 page frames while 1GB
+HugeTLB page consists in 4096.
+
+Next, we take the pmd level mapping of the HugeTLB page as an example to
+show the internal implementation of this optimization. There are 8 pages
+struct page structs associated with a HugeTLB page which is pmd mapped.
+
+Here is how things look before optimization.
+
+    HugeTLB                  struct pages(8 pages)         page frame(8 pages)
+ +-----------+ ---virt_to_page---> +-----------+   mapping to   +-----------+
+ |           |                     |     0     | -------------> |     0     |
+ |           |                     +-----------+                +-----------+
+ |           |                     |     1     | -------------> |     1     |
+ |           |                     +-----------+                +-----------+
+ |           |                     |     2     | -------------> |     2     |
+ |           |                     +-----------+                +-----------+
+ |           |                     |     3     | -------------> |     3     |
+ |           |                     +-----------+                +-----------+
+ |           |                     |     4     | -------------> |     4     |
+ |    PMD    |                     +-----------+                +-----------+
+ |   level   |                     |     5     | -------------> |     5     |
+ |  mapping  |                     +-----------+                +-----------+
+ |           |                     |     6     | -------------> |     6     |
+ |           |                     +-----------+                +-----------+
+ |           |                     |     7     | -------------> |     7     |
+ |           |                     +-----------+                +-----------+
+ |           |
+ |           |
+ |           |
+ +-----------+
+
+The value of page->compound_head is the same for all tail pages. The first
+page of page structs (page 0) associated with the HugeTLB page contains the 4
+page structs necessary to describe the HugeTLB. The only use of the remaining
+pages of page structs (page 1 to page 7) is to point to page->compound_head.
+Therefore, we can remap pages 2 to 7 to page 1. Only 2 pages of page structs
+will be used for each HugeTLB page. This will allow us to free the remaining
+6 pages to the buddy allocator.
+
+Here is how things look after remapping.
+
+    HugeTLB                  struct pages(8 pages)         page frame(8 pages)
+ +-----------+ ---virt_to_page---> +-----------+   mapping to   +-----------+
+ |           |                     |     0     | -------------> |     0     |
+ |           |                     +-----------+                +-----------+
+ |           |                     |     1     | -------------> |     1     |
+ |           |                     +-----------+                +-----------+
+ |           |                     |     2     | ----------------^ ^ ^ ^ ^ ^
+ |           |                     +-----------+                   | | | | |
+ |           |                     |     3     | ------------------+ | | | |
+ |           |                     +-----------+                     | | | |
+ |           |                     |     4     | --------------------+ | | |
+ |    PMD    |                     +-----------+                       | | |
+ |   level   |                     |     5     | ----------------------+ | |
+ |  mapping  |                     +-----------+                         | |
+ |           |                     |     6     | ------------------------+ |
+ |           |                     +-----------+                           |
+ |           |                     |     7     | --------------------------+
+ |           |                     +-----------+
+ |           |
+ |           |
+ |           |
+ +-----------+
+
+When a HugeTLB is freed to the buddy system, we should allocate 6 pages for
+vmemmap pages and restore the previous mapping relationship.
+
+For the HugeTLB page of the pud level mapping. It is similar to the former.
+We also can use this approach to free (PAGE_SIZE - 2) vmemmap pages.
+
+Apart from the HugeTLB page of the pmd/pud level mapping, some architectures
+(e.g. aarch64) provides a contiguous bit in the translation table entries
+that hints to the MMU to indicate that it is one of a contiguous set of
+entries that can be cached in a single TLB entry.
+
+The contiguous bit is used to increase the mapping size at the pmd and pte
+(last) level. So this type of HugeTLB page can be optimized only when its
+size of the struct page structs is greater than 2 pages.
+
diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst
index eff5fbd492d0..19f981a73a54 100644
--- a/Documentation/vm/index.rst
+++ b/Documentation/vm/index.rst
@@ -31,6 +31,7 @@ descriptions of data structures and algorithms.
    active_mm
    arch_pgtable_helpers
    balance
+   commpound_pagemaps
    cleancache
    free_page_reporting
    frontswap
diff --git a/mm/hugetlb_vmemmap.c b/mm/hugetlb_vmemmap.c
index c540c21e26f5..69d1f0a90e02 100644
--- a/mm/hugetlb_vmemmap.c
+++ b/mm/hugetlb_vmemmap.c
@@ -6,167 +6,7 @@
  *
  *     Author: Muchun Song <songmuchun@bytedance.com>
  *
- * The struct page structures (page structs) are used to describe a physical
- * page frame. By default, there is a one-to-one mapping from a page frame to
- * it's corresponding page struct.
- *
- * HugeTLB pages consist of multiple base page size pages and is supported by
- * many architectures. See hugetlbpage.rst in the Documentation directory for
- * more details. On the x86-64 architecture, HugeTLB pages of size 2MB and 1GB
- * are currently supported. Since the base page size on x86 is 4KB, a 2MB
- * HugeTLB page consists of 512 base pages and a 1GB HugeTLB page consists of
- * 4096 base pages. For each base page, there is a corresponding page struct.
- *
- * Within the HugeTLB subsystem, only the first 4 page structs are used to
- * contain unique information about a HugeTLB page. __NR_USED_SUBPAGE provides
- * this upper limit. The only 'useful' information in the remaining page structs
- * is the compound_head field, and this field is the same for all tail pages.
- *
- * By removing redundant page structs for HugeTLB pages, memory can be returned
- * to the buddy allocator for other uses.
- *
- * Different architectures support different HugeTLB pages. For example, the
- * following table is the HugeTLB page size supported by x86 and arm64
- * architectures. Because arm64 supports 4k, 16k, and 64k base pages and
- * supports contiguous entries, so it supports many kinds of sizes of HugeTLB
- * page.
- *
- * +--------------+-----------+-----------------------------------------------+
- * | Architecture | Page Size |                HugeTLB Page Size              |
- * +--------------+-----------+-----------+-----------+-----------+-----------+
- * |    x86-64    |    4KB    |    2MB    |    1GB    |           |           |
- * +--------------+-----------+-----------+-----------+-----------+-----------+
- * |              |    4KB    |   64KB    |    2MB    |    32MB   |    1GB    |
- * |              +-----------+-----------+-----------+-----------+-----------+
- * |    arm64     |   16KB    |    2MB    |   32MB    |     1GB   |           |
- * |              +-----------+-----------+-----------+-----------+-----------+
- * |              |   64KB    |    2MB    |  512MB    |    16GB   |           |
- * +--------------+-----------+-----------+-----------+-----------+-----------+
- *
- * When the system boot up, every HugeTLB page has more than one struct page
- * structs which size is (unit: pages):
- *
- *    struct_size = HugeTLB_Size / PAGE_SIZE * sizeof(struct page) / PAGE_SIZE
- *
- * Where HugeTLB_Size is the size of the HugeTLB page. We know that the size
- * of the HugeTLB page is always n times PAGE_SIZE. So we can get the following
- * relationship.
- *
- *    HugeTLB_Size = n * PAGE_SIZE
- *
- * Then,
- *
- *    struct_size = n * PAGE_SIZE / PAGE_SIZE * sizeof(struct page) / PAGE_SIZE
- *                = n * sizeof(struct page) / PAGE_SIZE
- *
- * We can use huge mapping at the pud/pmd level for the HugeTLB page.
- *
- * For the HugeTLB page of the pmd level mapping, then
- *
- *    struct_size = n * sizeof(struct page) / PAGE_SIZE
- *                = PAGE_SIZE / sizeof(pte_t) * sizeof(struct page) / PAGE_SIZE
- *                = sizeof(struct page) / sizeof(pte_t)
- *                = 64 / 8
- *                = 8 (pages)
- *
- * Where n is how many pte entries which one page can contains. So the value of
- * n is (PAGE_SIZE / sizeof(pte_t)).
- *
- * This optimization only supports 64-bit system, so the value of sizeof(pte_t)
- * is 8. And this optimization also applicable only when the size of struct page
- * is a power of two. In most cases, the size of struct page is 64 bytes (e.g.
- * x86-64 and arm64). So if we use pmd level mapping for a HugeTLB page, the
- * size of struct page structs of it is 8 page frames which size depends on the
- * size of the base page.
- *
- * For the HugeTLB page of the pud level mapping, then
- *
- *    struct_size = PAGE_SIZE / sizeof(pmd_t) * struct_size(pmd)
- *                = PAGE_SIZE / 8 * 8 (pages)
- *                = PAGE_SIZE (pages)
- *
- * Where the struct_size(pmd) is the size of the struct page structs of a
- * HugeTLB page of the pmd level mapping.
- *
- * E.g.: A 2MB HugeTLB page on x86_64 consists in 8 page frames while 1GB
- * HugeTLB page consists in 4096.
- *
- * Next, we take the pmd level mapping of the HugeTLB page as an example to
- * show the internal implementation of this optimization. There are 8 pages
- * struct page structs associated with a HugeTLB page which is pmd mapped.
- *
- * Here is how things look before optimization.
- *
- *    HugeTLB                  struct pages(8 pages)         page frame(8 pages)
- * +-----------+ ---virt_to_page---> +-----------+   mapping to   +-----------+
- * |           |                     |     0     | -------------> |     0     |
- * |           |                     +-----------+                +-----------+
- * |           |                     |     1     | -------------> |     1     |
- * |           |                     +-----------+                +-----------+
- * |           |                     |     2     | -------------> |     2     |
- * |           |                     +-----------+                +-----------+
- * |           |                     |     3     | -------------> |     3     |
- * |           |                     +-----------+                +-----------+
- * |           |                     |     4     | -------------> |     4     |
- * |    PMD    |                     +-----------+                +-----------+
- * |   level   |                     |     5     | -------------> |     5     |
- * |  mapping  |                     +-----------+                +-----------+
- * |           |                     |     6     | -------------> |     6     |
- * |           |                     +-----------+                +-----------+
- * |           |                     |     7     | -------------> |     7     |
- * |           |                     +-----------+                +-----------+
- * |           |
- * |           |
- * |           |
- * +-----------+
- *
- * The value of page->compound_head is the same for all tail pages. The first
- * page of page structs (page 0) associated with the HugeTLB page contains the 4
- * page structs necessary to describe the HugeTLB. The only use of the remaining
- * pages of page structs (page 1 to page 7) is to point to page->compound_head.
- * Therefore, we can remap pages 2 to 7 to page 1. Only 2 pages of page structs
- * will be used for each HugeTLB page. This will allow us to free the remaining
- * 6 pages to the buddy allocator.
- *
- * Here is how things look after remapping.
- *
- *    HugeTLB                  struct pages(8 pages)         page frame(8 pages)
- * +-----------+ ---virt_to_page---> +-----------+   mapping to   +-----------+
- * |           |                     |     0     | -------------> |     0     |
- * |           |                     +-----------+                +-----------+
- * |           |                     |     1     | -------------> |     1     |
- * |           |                     +-----------+                +-----------+
- * |           |                     |     2     | ----------------^ ^ ^ ^ ^ ^
- * |           |                     +-----------+                   | | | | |
- * |           |                     |     3     | ------------------+ | | | |
- * |           |                     +-----------+                     | | | |
- * |           |                     |     4     | --------------------+ | | |
- * |    PMD    |                     +-----------+                       | | |
- * |   level   |                     |     5     | ----------------------+ | |
- * |  mapping  |                     +-----------+                         | |
- * |           |                     |     6     | ------------------------+ |
- * |           |                     +-----------+                           |
- * |           |                     |     7     | --------------------------+
- * |           |                     +-----------+
- * |           |
- * |           |
- * |           |
- * +-----------+
- *
- * When a HugeTLB is freed to the buddy system, we should allocate 6 pages for
- * vmemmap pages and restore the previous mapping relationship.
- *
- * For the HugeTLB page of the pud level mapping. It is similar to the former.
- * We also can use this approach to free (PAGE_SIZE - 2) vmemmap pages.
- *
- * Apart from the HugeTLB page of the pmd/pud level mapping, some architectures
- * (e.g. aarch64) provides a contiguous bit in the translation table entries
- * that hints to the MMU to indicate that it is one of a contiguous set of
- * entries that can be cached in a single TLB entry.
- *
- * The contiguous bit is used to increase the mapping size at the pmd and pte
- * (last) level. So this type of HugeTLB page can be optimized only when its
- * size of the struct page structs is greater than 2 pages.
+ * See Documentation/vm/compound_pagemaps.rst
  */
 #define pr_fmt(fmt)	"HugeTLB: " fmt
 
-- 
2.17.1


  parent reply	other threads:[~2021-06-17 18:46 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17 18:44 [PATCH v2 00/14] mm, sparse-vmemmap: Introduce compound pagemaps Joao Martins
2021-06-17 18:44 ` [PATCH v2 01/14] memory-failure: fetch compound_head after pgmap_pfn_valid() Joao Martins
2021-06-20 23:56   ` HORIGUCHI NAOYA(堀口 直也)
2021-06-21 13:50     ` Joao Martins
2021-06-17 18:44 ` [PATCH v2 02/14] mm/page_alloc: split prep_compound_page into head and tail subparts Joao Martins
2021-07-13  0:02   ` Mike Kravetz
2021-07-13  1:11     ` Joao Martins
2021-06-17 18:44 ` [PATCH v2 03/14] mm/page_alloc: refactor memmap_init_zone_device() page init Joao Martins
2021-06-17 18:44 ` [PATCH v2 04/14] mm/memremap: add ZONE_DEVICE support for compound pages Joao Martins
2021-06-17 18:44 ` [PATCH v2 05/14] mm/sparse-vmemmap: add a pgmap argument to section activation Joao Martins
2021-06-17 18:44 ` [PATCH v2 06/14] mm/sparse-vmemmap: refactor core of vmemmap_populate_basepages() to helper Joao Martins
2021-06-17 18:45 ` Joao Martins [this message]
2021-06-21 13:12   ` [External] [PATCH v2 07/14] mm/hugetlb_vmemmap: move comment block to Documentation/vm Muchun Song
2021-06-21 13:12     ` Muchun Song
2021-06-21 13:42     ` Joao Martins
2021-07-13  0:14       ` Mike Kravetz
2021-07-13  1:11         ` Joao Martins
2021-06-17 18:45 ` [PATCH v2 08/14] mm/sparse-vmemmap: populate compound pagemaps Joao Martins
2021-06-17 18:45 ` [PATCH v2 09/14] mm/page_alloc: reuse tail struct pages for " Joao Martins
2021-06-17 18:45 ` [PATCH v2 10/14] device-dax: use ALIGN() for determining pgoff Joao Martins
2021-06-17 18:45 ` [PATCH v2 11/14] device-dax: ensure dev_dax->pgmap is valid for dynamic devices Joao Martins
2021-06-17 18:45 ` [PATCH v2 12/14] device-dax: compound pagemap support Joao Martins
2021-06-17 18:45 ` [PATCH v2 13/14] mm/gup: grab head page refcount once for group of subpages Joao Martins
2021-06-17 18:45 ` [PATCH v2 14/14] mm/sparse-vmemmap: improve memory savings for compound pud geometry Joao Martins

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210617184507.3662-8-joao.m.martins@oracle.com \
    --to=joao.m.martins@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=jane.chu@oracle.com \
    --cc=jgg@ziepe.ca \
    --cc=jhubbard@nvidia.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mike.kravetz@oracle.com \
    --cc=naoya.horiguchi@nec.com \
    --cc=nvdimm@lists.linux.dev \
    --cc=songmuchun@bytedance.com \
    --cc=vishal.l.verma@intel.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.