On 04.06.2021 00:15:50, Vincent Mailhol wrote:
> Add the netlink interface for TDC parameters of struct can_tdc_const
> and can_tdc.
> 
> Contrary to the can_bittiming(_const) structures for which there is
> just a single IFLA_CAN(_DATA)_BITTMING(_CONST) entry per structure,
> here, we create a nested entry IFLA_CAN_TDC. Within this nested entry,
> additional IFLA_CAN_TDC_TDC* entries are added for each of the TDC
> parameters of the newly introduced struct can_tdc_const and struct
> can_tdc.
> 
> For struct can_tdc_const, these are:
>         IFLA_CAN_TDC_TDCV_MAX
>         IFLA_CAN_TDC_TDCO_MAX
>         IFLA_CAN_TDC_TDCF_MAX
> 
> For struct can_tdc, these are:
>         IFLA_CAN_TDC_TDCV
>         IFLA_CAN_TDC_TDCO
>         IFLA_CAN_TDC_TDCF

I just noticed in the mcp2518fd data sheet:

| bit 14-8 TDCO[6:0]: Transmitter Delay Compensation Offset bits;
| Secondary Sample Point (SSP) Two’s complement; offset can be positive,
| zero, or negative.
| 
| 011 1111 = 63 x TSYSCLK
| ...
| 000 0000 = 0 x TSYSCLK
| ...
| 111 1111 = –64 x TSYSCLK

Have you takes this into account?

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |