[PATCH v2 00/12] drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec

[PATCH v2 00/12] drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec

[Maxime Ripard]

Hi,

hdmi-codec allows to have a lot of HDMI-audio related infrastructure in place,
it's missing a few controls to be able to provide HBR passthrough. This series
adds more infrastructure for the drivers, and leverages it in the vc4 HDMI
controller driver.

Thanks!
Maxime

Changes from v1:
  - Added an extra patch to clarify the iec958 controls iface policy
  - Added kerneldoc for the new iec958 PCM functions
  - s/EXPORT_SYMBOL/EXPORT_SYMBOL_GPL
  - Used the ALSA prefix where relevant
  - Rebased on drm-misc-next-2021-05-17

Dom Cobley (5):
  drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET
  drm/vc4: hdmi: Set HDMI_MAI_FMT
  drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE
  drm/vc4: hdmi: Remove firmware logic for MAI threshold setting
  ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

Maxime Ripard (7):
  ALSA: doc: Clarify IEC958 controls iface
  ALSA: iec958: Split status creation and fill
  ASoC: hdmi-codec: Rework to support more controls
  ASoC: hdmi-codec: Add iec958 controls
  ASoC: hdmi-codec: Add a prepare hook
  drm/vc4: hdmi: Register HDMI codec
  drm/vc4: hdmi: Remove redundant variables

 .../kernel-api/writing-an-alsa-driver.rst     |  13 +-
 arch/arm/boot/dts/bcm2711.dtsi                |   4 +-
 drivers/gpu/drm/vc4/Kconfig                   |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c                | 322 ++++++++----------
 drivers/gpu/drm/vc4/vc4_hdmi.h                |   5 +-
 drivers/gpu/drm/vc4/vc4_regs.h                |  30 ++
 include/sound/hdmi-codec.h                    |  12 +-
 include/sound/pcm_iec958.h                    |   8 +
 sound/core/pcm_iec958.c                       | 176 +++++++---
 sound/soc/codecs/hdmi-codec.c                 | 219 +++++++++---
 10 files changed, 508 insertions(+), 282 deletions(-)

-- 
2.31.1

[PATCH v2 00/12] drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec

[Maxime Ripard]

Hi,

hdmi-codec allows to have a lot of HDMI-audio related infrastructure in place,
it's missing a few controls to be able to provide HBR passthrough. This series
adds more infrastructure for the drivers, and leverages it in the vc4 HDMI
controller driver.

Thanks!
Maxime

Changes from v1:
  - Added an extra patch to clarify the iec958 controls iface policy
  - Added kerneldoc for the new iec958 PCM functions
  - s/EXPORT_SYMBOL/EXPORT_SYMBOL_GPL
  - Used the ALSA prefix where relevant
  - Rebased on drm-misc-next-2021-05-17

Dom Cobley (5):
  drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET
  drm/vc4: hdmi: Set HDMI_MAI_FMT
  drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE
  drm/vc4: hdmi: Remove firmware logic for MAI threshold setting
  ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

Maxime Ripard (7):
  ALSA: doc: Clarify IEC958 controls iface
  ALSA: iec958: Split status creation and fill
  ASoC: hdmi-codec: Rework to support more controls
  ASoC: hdmi-codec: Add iec958 controls
  ASoC: hdmi-codec: Add a prepare hook
  drm/vc4: hdmi: Register HDMI codec
  drm/vc4: hdmi: Remove redundant variables

 .../kernel-api/writing-an-alsa-driver.rst     |  13 +-
 arch/arm/boot/dts/bcm2711.dtsi                |   4 +-
 drivers/gpu/drm/vc4/Kconfig                   |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c                | 322 ++++++++----------
 drivers/gpu/drm/vc4/vc4_hdmi.h                |   5 +-
 drivers/gpu/drm/vc4/vc4_regs.h                |  30 ++
 include/sound/hdmi-codec.h                    |  12 +-
 include/sound/pcm_iec958.h                    |   8 +
 sound/core/pcm_iec958.c                       | 176 +++++++---
 sound/soc/codecs/hdmi-codec.c                 | 219 +++++++++---
 10 files changed, 508 insertions(+), 282 deletions(-)

-- 
2.31.1

[PATCH v2 00/12] drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec

[Maxime Ripard]

Hi,

hdmi-codec allows to have a lot of HDMI-audio related infrastructure in place,
it's missing a few controls to be able to provide HBR passthrough. This series
adds more infrastructure for the drivers, and leverages it in the vc4 HDMI
controller driver.

Thanks!
Maxime

Changes from v1:
  - Added an extra patch to clarify the iec958 controls iface policy
  - Added kerneldoc for the new iec958 PCM functions
  - s/EXPORT_SYMBOL/EXPORT_SYMBOL_GPL
  - Used the ALSA prefix where relevant
  - Rebased on drm-misc-next-2021-05-17

Dom Cobley (5):
  drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET
  drm/vc4: hdmi: Set HDMI_MAI_FMT
  drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE
  drm/vc4: hdmi: Remove firmware logic for MAI threshold setting
  ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

Maxime Ripard (7):
  ALSA: doc: Clarify IEC958 controls iface
  ALSA: iec958: Split status creation and fill
  ASoC: hdmi-codec: Rework to support more controls
  ASoC: hdmi-codec: Add iec958 controls
  ASoC: hdmi-codec: Add a prepare hook
  drm/vc4: hdmi: Register HDMI codec
  drm/vc4: hdmi: Remove redundant variables

 .../kernel-api/writing-an-alsa-driver.rst     |  13 +-
 arch/arm/boot/dts/bcm2711.dtsi                |   4 +-
 drivers/gpu/drm/vc4/Kconfig                   |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c                | 322 ++++++++----------
 drivers/gpu/drm/vc4/vc4_hdmi.h                |   5 +-
 drivers/gpu/drm/vc4/vc4_regs.h                |  30 ++
 include/sound/hdmi-codec.h                    |  12 +-
 include/sound/pcm_iec958.h                    |   8 +
 sound/core/pcm_iec958.c                       | 176 +++++++---
 sound/soc/codecs/hdmi-codec.c                 | 219 +++++++++---
 10 files changed, 508 insertions(+), 282 deletions(-)

-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 00/12] drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec

[Maxime Ripard]

Hi,

hdmi-codec allows to have a lot of HDMI-audio related infrastructure in place,
it's missing a few controls to be able to provide HBR passthrough. This series
adds more infrastructure for the drivers, and leverages it in the vc4 HDMI
controller driver.

Thanks!
Maxime

Changes from v1:
  - Added an extra patch to clarify the iec958 controls iface policy
  - Added kerneldoc for the new iec958 PCM functions
  - s/EXPORT_SYMBOL/EXPORT_SYMBOL_GPL
  - Used the ALSA prefix where relevant
  - Rebased on drm-misc-next-2021-05-17

Dom Cobley (5):
  drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET
  drm/vc4: hdmi: Set HDMI_MAI_FMT
  drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE
  drm/vc4: hdmi: Remove firmware logic for MAI threshold setting
  ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

Maxime Ripard (7):
  ALSA: doc: Clarify IEC958 controls iface
  ALSA: iec958: Split status creation and fill
  ASoC: hdmi-codec: Rework to support more controls
  ASoC: hdmi-codec: Add iec958 controls
  ASoC: hdmi-codec: Add a prepare hook
  drm/vc4: hdmi: Register HDMI codec
  drm/vc4: hdmi: Remove redundant variables

 .../kernel-api/writing-an-alsa-driver.rst     |  13 +-
 arch/arm/boot/dts/bcm2711.dtsi                |   4 +-
 drivers/gpu/drm/vc4/Kconfig                   |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c                | 322 ++++++++----------
 drivers/gpu/drm/vc4/vc4_hdmi.h                |   5 +-
 drivers/gpu/drm/vc4/vc4_regs.h                |  30 ++
 include/sound/hdmi-codec.h                    |  12 +-
 include/sound/pcm_iec958.h                    |   8 +
 sound/core/pcm_iec958.c                       | 176 +++++++---
 sound/soc/codecs/hdmi-codec.c                 | 219 +++++++++---
 10 files changed, 508 insertions(+), 282 deletions(-)

-- 
2.31.1

[PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Maxime Ripard]

The doc currently mentions that the IEC958 Playback Default should be
exposed on the PCM iface, and the Playback Mask on the mixer iface.

It's a bit confusing to advise to have two related controls on two
separate ifaces, and it looks like the drivers that currently expose
those controls use any combination of the mixer and PCM ifaces.

Let's try to clarify the situation a bit, and encourage to at least have
the controls on the same iface.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index e6365836fa8b..01d59b8aea92 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3508,14 +3508,15 @@ field must be set, though).
 
 “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
 status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
-returns the bitmask for professional mode. They are read-only controls,
-and are defined as MIXER controls (iface =
-``SNDRV_CTL_ELEM_IFACE_MIXER``).
+returns the bitmask for professional mode. They are read-only controls.
 
 Meanwhile, “IEC958 Playback Default” control is defined for getting and
-setting the current default IEC958 bits. Note that this one is usually
-defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
-although in some places it's defined as a MIXER control.
+setting the current default IEC958 bits.
+
+Due to historical reasons, both variants of the Playback Mask and the
+Playback Default controls can be implemented on either a
+``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
+Drivers should expose the mask and default on the same iface though.
 
 In addition, you can define the control switches to enable/disable or to
 set the raw bit mode. The implementation will depend on the chip, but
-- 
2.31.1

[PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Maxime Ripard]

The doc currently mentions that the IEC958 Playback Default should be
exposed on the PCM iface, and the Playback Mask on the mixer iface.

It's a bit confusing to advise to have two related controls on two
separate ifaces, and it looks like the drivers that currently expose
those controls use any combination of the mixer and PCM ifaces.

Let's try to clarify the situation a bit, and encourage to at least have
the controls on the same iface.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index e6365836fa8b..01d59b8aea92 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3508,14 +3508,15 @@ field must be set, though).
 
 “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
 status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
-returns the bitmask for professional mode. They are read-only controls,
-and are defined as MIXER controls (iface =
-``SNDRV_CTL_ELEM_IFACE_MIXER``).
+returns the bitmask for professional mode. They are read-only controls.
 
 Meanwhile, “IEC958 Playback Default” control is defined for getting and
-setting the current default IEC958 bits. Note that this one is usually
-defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
-although in some places it's defined as a MIXER control.
+setting the current default IEC958 bits.
+
+Due to historical reasons, both variants of the Playback Mask and the
+Playback Default controls can be implemented on either a
+``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
+Drivers should expose the mask and default on the same iface though.
 
 In addition, you can define the control switches to enable/disable or to
 set the raw bit mode. The implementation will depend on the chip, but
-- 
2.31.1

[PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Maxime Ripard]

The doc currently mentions that the IEC958 Playback Default should be
exposed on the PCM iface, and the Playback Mask on the mixer iface.

It's a bit confusing to advise to have two related controls on two
separate ifaces, and it looks like the drivers that currently expose
those controls use any combination of the mixer and PCM ifaces.

Let's try to clarify the situation a bit, and encourage to at least have
the controls on the same iface.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index e6365836fa8b..01d59b8aea92 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3508,14 +3508,15 @@ field must be set, though).
 
 “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
 status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
-returns the bitmask for professional mode. They are read-only controls,
-and are defined as MIXER controls (iface =
-``SNDRV_CTL_ELEM_IFACE_MIXER``).
+returns the bitmask for professional mode. They are read-only controls.
 
 Meanwhile, “IEC958 Playback Default” control is defined for getting and
-setting the current default IEC958 bits. Note that this one is usually
-defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
-although in some places it's defined as a MIXER control.
+setting the current default IEC958 bits.
+
+Due to historical reasons, both variants of the Playback Mask and the
+Playback Default controls can be implemented on either a
+``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
+Drivers should expose the mask and default on the same iface though.
 
 In addition, you can define the control switches to enable/disable or to
 set the raw bit mode. The implementation will depend on the chip, but
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Maxime Ripard]

The doc currently mentions that the IEC958 Playback Default should be
exposed on the PCM iface, and the Playback Mask on the mixer iface.

It's a bit confusing to advise to have two related controls on two
separate ifaces, and it looks like the drivers that currently expose
those controls use any combination of the mixer and PCM ifaces.

Let's try to clarify the situation a bit, and encourage to at least have
the controls on the same iface.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index e6365836fa8b..01d59b8aea92 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3508,14 +3508,15 @@ field must be set, though).
 
 “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
 status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
-returns the bitmask for professional mode. They are read-only controls,
-and are defined as MIXER controls (iface =
-``SNDRV_CTL_ELEM_IFACE_MIXER``).
+returns the bitmask for professional mode. They are read-only controls.
 
 Meanwhile, “IEC958 Playback Default” control is defined for getting and
-setting the current default IEC958 bits. Note that this one is usually
-defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
-although in some places it's defined as a MIXER control.
+setting the current default IEC958 bits.
+
+Due to historical reasons, both variants of the Playback Mask and the
+Playback Default controls can be implemented on either a
+``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
+Drivers should expose the mask and default on the same iface though.
 
 In addition, you can define the control switches to enable/disable or to
 set the raw bit mode. The implementation will depend on the chip, but
-- 
2.31.1

[PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Maxime Ripard]

In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.

Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.

Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/pcm_iec958.h |   8 ++
 sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
 2 files changed, 141 insertions(+), 43 deletions(-)

diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
index 0939aa45e2fe..64e84441cde1 100644
--- a/include/sound/pcm_iec958.h
+++ b/include/sound/pcm_iec958.h
@@ -4,6 +4,14 @@
 
 #include <linux/types.h>
 
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
+
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
+				 size_t len);
+
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len);
+
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len);
 
diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
index f9a211cc1f2c..7a1b816f67cc 100644
--- a/sound/core/pcm_iec958.c
+++ b/sound/core/pcm_iec958.c
@@ -9,41 +9,85 @@
 #include <sound/pcm_params.h>
 #include <sound/pcm_iec958.h>
 
-static int create_iec958_consumer(uint rate, uint sample_width,
-				  u8 *cs, size_t len)
+/**
+ * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Create the consumer format channel status data in @cs of maximum size
+ * @len. When relevant, the configuration-dependant bits will be set as
+ * unspecified.
+ *
+ * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
+ * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
+ * bits by their actual values.
+ *
+ * Drivers may wish to tweak the contents of the buffer after creation.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
 {
-	unsigned int fs, ws;
-
 	if (len < 4)
 		return -EINVAL;
 
-	switch (rate) {
-	case 32000:
-		fs = IEC958_AES3_CON_FS_32000;
-		break;
-	case 44100:
-		fs = IEC958_AES3_CON_FS_44100;
-		break;
-	case 48000:
-		fs = IEC958_AES3_CON_FS_48000;
-		break;
-	case 88200:
-		fs = IEC958_AES3_CON_FS_88200;
-		break;
-	case 96000:
-		fs = IEC958_AES3_CON_FS_96000;
-		break;
-	case 176400:
-		fs = IEC958_AES3_CON_FS_176400;
-		break;
-	case 192000:
-		fs = IEC958_AES3_CON_FS_192000;
-		break;
-	default:
+	memset(cs, 0, len);
+
+	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
+	cs[1] = IEC958_AES1_CON_GENERAL;
+	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
+	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
+
+	if (len > 4)
+		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
+
+static int fill_iec958_consumer(uint rate, uint sample_width,
+				u8 *cs, size_t len)
+{
+	if (len < 4)
 		return -EINVAL;
+
+	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
+		unsigned int fs;
+
+		switch (rate) {
+			case 32000:
+				fs = IEC958_AES3_CON_FS_32000;
+				break;
+			case 44100:
+				fs = IEC958_AES3_CON_FS_44100;
+				break;
+			case 48000:
+				fs = IEC958_AES3_CON_FS_48000;
+				break;
+			case 88200:
+				fs = IEC958_AES3_CON_FS_88200;
+				break;
+			case 96000:
+				fs = IEC958_AES3_CON_FS_96000;
+				break;
+			case 176400:
+				fs = IEC958_AES3_CON_FS_176400;
+				break;
+			case 192000:
+				fs = IEC958_AES3_CON_FS_192000;
+				break;
+			default:
+				return -EINVAL;
+		}
+
+		cs[3] &= ~IEC958_AES3_CON_FS;
+		cs[3] |= fs;
 	}
 
-	if (len > 4) {
+	if (len > 4 &&
+	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
+		unsigned int ws;
+
 		switch (sample_width) {
 		case 16:
 			ws = IEC958_AES4_CON_WORDLEN_20_16;
@@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 		default:
 			return -EINVAL;
 		}
+
+		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
+		cs[4] |= ws;
 	}
 
-	memset(cs, 0, len);
-
-	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
-	cs[1] = IEC958_AES1_CON_GENERAL;
-	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
-	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
-
-	if (len > 4)
-		cs[4] = ws;
-
 	return len;
 }
 
+/**
+ * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
+ * @runtime: pcm runtime structure with ->rate filled in
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM runtime @runtime.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
+				 u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(runtime->rate,
+				    snd_pcm_format_width(runtime->format),
+				    cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
+
+/**
+ * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
+ * @params: the hw_params instance for extracting rate and sample format
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM hardware parameters @params.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled..
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
+
 /**
  * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
  * @runtime: pcm runtime structure with ->rate filled in
@@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len)
 {
-	return create_iec958_consumer(runtime->rate,
-				      snd_pcm_format_width(runtime->format),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 
@@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
 					     u8 *cs, size_t len)
 {
-	return create_iec958_consumer(params_rate(params), params_width(params),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
-- 
2.31.1

[PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Maxime Ripard]

In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.

Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.

Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/pcm_iec958.h |   8 ++
 sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
 2 files changed, 141 insertions(+), 43 deletions(-)

diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
index 0939aa45e2fe..64e84441cde1 100644
--- a/include/sound/pcm_iec958.h
+++ b/include/sound/pcm_iec958.h
@@ -4,6 +4,14 @@
 
 #include <linux/types.h>
 
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
+
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
+				 size_t len);
+
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len);
+
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len);
 
diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
index f9a211cc1f2c..7a1b816f67cc 100644
--- a/sound/core/pcm_iec958.c
+++ b/sound/core/pcm_iec958.c
@@ -9,41 +9,85 @@
 #include <sound/pcm_params.h>
 #include <sound/pcm_iec958.h>
 
-static int create_iec958_consumer(uint rate, uint sample_width,
-				  u8 *cs, size_t len)
+/**
+ * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Create the consumer format channel status data in @cs of maximum size
+ * @len. When relevant, the configuration-dependant bits will be set as
+ * unspecified.
+ *
+ * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
+ * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
+ * bits by their actual values.
+ *
+ * Drivers may wish to tweak the contents of the buffer after creation.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
 {
-	unsigned int fs, ws;
-
 	if (len < 4)
 		return -EINVAL;
 
-	switch (rate) {
-	case 32000:
-		fs = IEC958_AES3_CON_FS_32000;
-		break;
-	case 44100:
-		fs = IEC958_AES3_CON_FS_44100;
-		break;
-	case 48000:
-		fs = IEC958_AES3_CON_FS_48000;
-		break;
-	case 88200:
-		fs = IEC958_AES3_CON_FS_88200;
-		break;
-	case 96000:
-		fs = IEC958_AES3_CON_FS_96000;
-		break;
-	case 176400:
-		fs = IEC958_AES3_CON_FS_176400;
-		break;
-	case 192000:
-		fs = IEC958_AES3_CON_FS_192000;
-		break;
-	default:
+	memset(cs, 0, len);
+
+	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
+	cs[1] = IEC958_AES1_CON_GENERAL;
+	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
+	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
+
+	if (len > 4)
+		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
+
+static int fill_iec958_consumer(uint rate, uint sample_width,
+				u8 *cs, size_t len)
+{
+	if (len < 4)
 		return -EINVAL;
+
+	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
+		unsigned int fs;
+
+		switch (rate) {
+			case 32000:
+				fs = IEC958_AES3_CON_FS_32000;
+				break;
+			case 44100:
+				fs = IEC958_AES3_CON_FS_44100;
+				break;
+			case 48000:
+				fs = IEC958_AES3_CON_FS_48000;
+				break;
+			case 88200:
+				fs = IEC958_AES3_CON_FS_88200;
+				break;
+			case 96000:
+				fs = IEC958_AES3_CON_FS_96000;
+				break;
+			case 176400:
+				fs = IEC958_AES3_CON_FS_176400;
+				break;
+			case 192000:
+				fs = IEC958_AES3_CON_FS_192000;
+				break;
+			default:
+				return -EINVAL;
+		}
+
+		cs[3] &= ~IEC958_AES3_CON_FS;
+		cs[3] |= fs;
 	}
 
-	if (len > 4) {
+	if (len > 4 &&
+	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
+		unsigned int ws;
+
 		switch (sample_width) {
 		case 16:
 			ws = IEC958_AES4_CON_WORDLEN_20_16;
@@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 		default:
 			return -EINVAL;
 		}
+
+		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
+		cs[4] |= ws;
 	}
 
-	memset(cs, 0, len);
-
-	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
-	cs[1] = IEC958_AES1_CON_GENERAL;
-	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
-	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
-
-	if (len > 4)
-		cs[4] = ws;
-
 	return len;
 }
 
+/**
+ * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
+ * @runtime: pcm runtime structure with ->rate filled in
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM runtime @runtime.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
+				 u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(runtime->rate,
+				    snd_pcm_format_width(runtime->format),
+				    cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
+
+/**
+ * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
+ * @params: the hw_params instance for extracting rate and sample format
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM hardware parameters @params.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled..
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
+
 /**
  * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
  * @runtime: pcm runtime structure with ->rate filled in
@@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len)
 {
-	return create_iec958_consumer(runtime->rate,
-				      snd_pcm_format_width(runtime->format),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 
@@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
 					     u8 *cs, size_t len)
 {
-	return create_iec958_consumer(params_rate(params), params_width(params),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
-- 
2.31.1

[PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Maxime Ripard]

In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.

Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.

Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/pcm_iec958.h |   8 ++
 sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
 2 files changed, 141 insertions(+), 43 deletions(-)

diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
index 0939aa45e2fe..64e84441cde1 100644
--- a/include/sound/pcm_iec958.h
+++ b/include/sound/pcm_iec958.h
@@ -4,6 +4,14 @@
 
 #include <linux/types.h>
 
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
+
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
+				 size_t len);
+
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len);
+
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len);
 
diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
index f9a211cc1f2c..7a1b816f67cc 100644
--- a/sound/core/pcm_iec958.c
+++ b/sound/core/pcm_iec958.c
@@ -9,41 +9,85 @@
 #include <sound/pcm_params.h>
 #include <sound/pcm_iec958.h>
 
-static int create_iec958_consumer(uint rate, uint sample_width,
-				  u8 *cs, size_t len)
+/**
+ * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Create the consumer format channel status data in @cs of maximum size
+ * @len. When relevant, the configuration-dependant bits will be set as
+ * unspecified.
+ *
+ * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
+ * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
+ * bits by their actual values.
+ *
+ * Drivers may wish to tweak the contents of the buffer after creation.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
 {
-	unsigned int fs, ws;
-
 	if (len < 4)
 		return -EINVAL;
 
-	switch (rate) {
-	case 32000:
-		fs = IEC958_AES3_CON_FS_32000;
-		break;
-	case 44100:
-		fs = IEC958_AES3_CON_FS_44100;
-		break;
-	case 48000:
-		fs = IEC958_AES3_CON_FS_48000;
-		break;
-	case 88200:
-		fs = IEC958_AES3_CON_FS_88200;
-		break;
-	case 96000:
-		fs = IEC958_AES3_CON_FS_96000;
-		break;
-	case 176400:
-		fs = IEC958_AES3_CON_FS_176400;
-		break;
-	case 192000:
-		fs = IEC958_AES3_CON_FS_192000;
-		break;
-	default:
+	memset(cs, 0, len);
+
+	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
+	cs[1] = IEC958_AES1_CON_GENERAL;
+	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
+	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
+
+	if (len > 4)
+		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
+
+static int fill_iec958_consumer(uint rate, uint sample_width,
+				u8 *cs, size_t len)
+{
+	if (len < 4)
 		return -EINVAL;
+
+	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
+		unsigned int fs;
+
+		switch (rate) {
+			case 32000:
+				fs = IEC958_AES3_CON_FS_32000;
+				break;
+			case 44100:
+				fs = IEC958_AES3_CON_FS_44100;
+				break;
+			case 48000:
+				fs = IEC958_AES3_CON_FS_48000;
+				break;
+			case 88200:
+				fs = IEC958_AES3_CON_FS_88200;
+				break;
+			case 96000:
+				fs = IEC958_AES3_CON_FS_96000;
+				break;
+			case 176400:
+				fs = IEC958_AES3_CON_FS_176400;
+				break;
+			case 192000:
+				fs = IEC958_AES3_CON_FS_192000;
+				break;
+			default:
+				return -EINVAL;
+		}
+
+		cs[3] &= ~IEC958_AES3_CON_FS;
+		cs[3] |= fs;
 	}
 
-	if (len > 4) {
+	if (len > 4 &&
+	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
+		unsigned int ws;
+
 		switch (sample_width) {
 		case 16:
 			ws = IEC958_AES4_CON_WORDLEN_20_16;
@@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 		default:
 			return -EINVAL;
 		}
+
+		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
+		cs[4] |= ws;
 	}
 
-	memset(cs, 0, len);
-
-	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
-	cs[1] = IEC958_AES1_CON_GENERAL;
-	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
-	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
-
-	if (len > 4)
-		cs[4] = ws;
-
 	return len;
 }
 
+/**
+ * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
+ * @runtime: pcm runtime structure with ->rate filled in
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM runtime @runtime.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
+				 u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(runtime->rate,
+				    snd_pcm_format_width(runtime->format),
+				    cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
+
+/**
+ * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
+ * @params: the hw_params instance for extracting rate and sample format
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM hardware parameters @params.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled..
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
+
 /**
  * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
  * @runtime: pcm runtime structure with ->rate filled in
@@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len)
 {
-	return create_iec958_consumer(runtime->rate,
-				      snd_pcm_format_width(runtime->format),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 
@@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
 					     u8 *cs, size_t len)
 {
-	return create_iec958_consumer(params_rate(params), params_width(params),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Maxime Ripard]

In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.

Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.

Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/pcm_iec958.h |   8 ++
 sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
 2 files changed, 141 insertions(+), 43 deletions(-)

diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
index 0939aa45e2fe..64e84441cde1 100644
--- a/include/sound/pcm_iec958.h
+++ b/include/sound/pcm_iec958.h
@@ -4,6 +4,14 @@
 
 #include <linux/types.h>
 
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
+
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
+				 size_t len);
+
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len);
+
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len);
 
diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
index f9a211cc1f2c..7a1b816f67cc 100644
--- a/sound/core/pcm_iec958.c
+++ b/sound/core/pcm_iec958.c
@@ -9,41 +9,85 @@
 #include <sound/pcm_params.h>
 #include <sound/pcm_iec958.h>
 
-static int create_iec958_consumer(uint rate, uint sample_width,
-				  u8 *cs, size_t len)
+/**
+ * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Create the consumer format channel status data in @cs of maximum size
+ * @len. When relevant, the configuration-dependant bits will be set as
+ * unspecified.
+ *
+ * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
+ * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
+ * bits by their actual values.
+ *
+ * Drivers may wish to tweak the contents of the buffer after creation.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
 {
-	unsigned int fs, ws;
-
 	if (len < 4)
 		return -EINVAL;
 
-	switch (rate) {
-	case 32000:
-		fs = IEC958_AES3_CON_FS_32000;
-		break;
-	case 44100:
-		fs = IEC958_AES3_CON_FS_44100;
-		break;
-	case 48000:
-		fs = IEC958_AES3_CON_FS_48000;
-		break;
-	case 88200:
-		fs = IEC958_AES3_CON_FS_88200;
-		break;
-	case 96000:
-		fs = IEC958_AES3_CON_FS_96000;
-		break;
-	case 176400:
-		fs = IEC958_AES3_CON_FS_176400;
-		break;
-	case 192000:
-		fs = IEC958_AES3_CON_FS_192000;
-		break;
-	default:
+	memset(cs, 0, len);
+
+	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
+	cs[1] = IEC958_AES1_CON_GENERAL;
+	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
+	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
+
+	if (len > 4)
+		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
+
+static int fill_iec958_consumer(uint rate, uint sample_width,
+				u8 *cs, size_t len)
+{
+	if (len < 4)
 		return -EINVAL;
+
+	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
+		unsigned int fs;
+
+		switch (rate) {
+			case 32000:
+				fs = IEC958_AES3_CON_FS_32000;
+				break;
+			case 44100:
+				fs = IEC958_AES3_CON_FS_44100;
+				break;
+			case 48000:
+				fs = IEC958_AES3_CON_FS_48000;
+				break;
+			case 88200:
+				fs = IEC958_AES3_CON_FS_88200;
+				break;
+			case 96000:
+				fs = IEC958_AES3_CON_FS_96000;
+				break;
+			case 176400:
+				fs = IEC958_AES3_CON_FS_176400;
+				break;
+			case 192000:
+				fs = IEC958_AES3_CON_FS_192000;
+				break;
+			default:
+				return -EINVAL;
+		}
+
+		cs[3] &= ~IEC958_AES3_CON_FS;
+		cs[3] |= fs;
 	}
 
-	if (len > 4) {
+	if (len > 4 &&
+	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
+		unsigned int ws;
+
 		switch (sample_width) {
 		case 16:
 			ws = IEC958_AES4_CON_WORDLEN_20_16;
@@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 		default:
 			return -EINVAL;
 		}
+
+		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
+		cs[4] |= ws;
 	}
 
-	memset(cs, 0, len);
-
-	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
-	cs[1] = IEC958_AES1_CON_GENERAL;
-	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
-	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
-
-	if (len > 4)
-		cs[4] = ws;
-
 	return len;
 }
 
+/**
+ * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
+ * @runtime: pcm runtime structure with ->rate filled in
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM runtime @runtime.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
+				 u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(runtime->rate,
+				    snd_pcm_format_width(runtime->format),
+				    cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
+
+/**
+ * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
+ * @params: the hw_params instance for extracting rate and sample format
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM hardware parameters @params.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled..
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
+
 /**
  * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
  * @runtime: pcm runtime structure with ->rate filled in
@@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len)
 {
-	return create_iec958_consumer(runtime->rate,
-				      snd_pcm_format_width(runtime->format),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 
@@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
 					     u8 *cs, size_t len)
 {
-	return create_iec958_consumer(params_rate(params), params_width(params),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
-- 
2.31.1

[PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Maxime Ripard]

We're going to add more controls to support the IEC958 output, so let's
rework the control registration a bit to support more of them.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 43 ++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 1567ba196ab9..65bde6f0ea1c 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -620,21 +620,23 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |\
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
-static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
-			      struct snd_soc_dai *dai)
-{
-	struct snd_soc_dai_driver *drv = dai->driver;
-	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
-	struct snd_kcontrol *kctl;
-	struct snd_kcontrol_new hdmi_eld_ctl = {
-		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
+			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
 		.name	= "ELD",
 		.info	= hdmi_eld_ctl_info,
 		.get	= hdmi_eld_ctl_get,
-		.device	= rtd->pcm->device,
-	};
+	},
+};
+
+static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_dai_driver *drv = dai->driver;
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	unsigned int i;
 	int ret;
 
 	ret =  snd_pcm_add_chmap_ctls(rtd->pcm, SNDRV_PCM_STREAM_PLAYBACK,
@@ -651,12 +653,21 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
 	hcp->chmap_info->chmap = hdmi_codec_stereo_chmaps;
 	hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
 
-	/* add ELD ctl with the device number corresponding to the PCM stream */
-	kctl = snd_ctl_new1(&hdmi_eld_ctl, dai->component);
-	if (!kctl)
-		return -ENOMEM;
+	for (i = 0; i < ARRAY_SIZE(hdmi_codec_controls); i++) {
+		struct snd_kcontrol *kctl;
 
-	return snd_ctl_add(rtd->card->snd_card, kctl);
+		/* add ELD ctl with the device number corresponding to the PCM stream */
+		kctl = snd_ctl_new1(&hdmi_codec_controls[i], dai->component);
+		if (!kctl)
+			return -ENOMEM;
+
+		kctl->id.device = rtd->pcm->device;
+		ret = snd_ctl_add(rtd->card->snd_card, kctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int hdmi_dai_probe(struct snd_soc_dai *dai)
-- 
2.31.1

[PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Maxime Ripard]

We're going to add more controls to support the IEC958 output, so let's
rework the control registration a bit to support more of them.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 43 ++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 1567ba196ab9..65bde6f0ea1c 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -620,21 +620,23 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |\
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
-static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
-			      struct snd_soc_dai *dai)
-{
-	struct snd_soc_dai_driver *drv = dai->driver;
-	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
-	struct snd_kcontrol *kctl;
-	struct snd_kcontrol_new hdmi_eld_ctl = {
-		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
+			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
 		.name	= "ELD",
 		.info	= hdmi_eld_ctl_info,
 		.get	= hdmi_eld_ctl_get,
-		.device	= rtd->pcm->device,
-	};
+	},
+};
+
+static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_dai_driver *drv = dai->driver;
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	unsigned int i;
 	int ret;
 
 	ret =  snd_pcm_add_chmap_ctls(rtd->pcm, SNDRV_PCM_STREAM_PLAYBACK,
@@ -651,12 +653,21 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
 	hcp->chmap_info->chmap = hdmi_codec_stereo_chmaps;
 	hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
 
-	/* add ELD ctl with the device number corresponding to the PCM stream */
-	kctl = snd_ctl_new1(&hdmi_eld_ctl, dai->component);
-	if (!kctl)
-		return -ENOMEM;
+	for (i = 0; i < ARRAY_SIZE(hdmi_codec_controls); i++) {
+		struct snd_kcontrol *kctl;
 
-	return snd_ctl_add(rtd->card->snd_card, kctl);
+		/* add ELD ctl with the device number corresponding to the PCM stream */
+		kctl = snd_ctl_new1(&hdmi_codec_controls[i], dai->component);
+		if (!kctl)
+			return -ENOMEM;
+
+		kctl->id.device = rtd->pcm->device;
+		ret = snd_ctl_add(rtd->card->snd_card, kctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int hdmi_dai_probe(struct snd_soc_dai *dai)
-- 
2.31.1

[PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Maxime Ripard]

We're going to add more controls to support the IEC958 output, so let's
rework the control registration a bit to support more of them.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 43 ++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 1567ba196ab9..65bde6f0ea1c 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -620,21 +620,23 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |\
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
-static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
-			      struct snd_soc_dai *dai)
-{
-	struct snd_soc_dai_driver *drv = dai->driver;
-	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
-	struct snd_kcontrol *kctl;
-	struct snd_kcontrol_new hdmi_eld_ctl = {
-		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
+			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
 		.name	= "ELD",
 		.info	= hdmi_eld_ctl_info,
 		.get	= hdmi_eld_ctl_get,
-		.device	= rtd->pcm->device,
-	};
+	},
+};
+
+static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_dai_driver *drv = dai->driver;
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	unsigned int i;
 	int ret;
 
 	ret =  snd_pcm_add_chmap_ctls(rtd->pcm, SNDRV_PCM_STREAM_PLAYBACK,
@@ -651,12 +653,21 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
 	hcp->chmap_info->chmap = hdmi_codec_stereo_chmaps;
 	hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
 
-	/* add ELD ctl with the device number corresponding to the PCM stream */
-	kctl = snd_ctl_new1(&hdmi_eld_ctl, dai->component);
-	if (!kctl)
-		return -ENOMEM;
+	for (i = 0; i < ARRAY_SIZE(hdmi_codec_controls); i++) {
+		struct snd_kcontrol *kctl;
 
-	return snd_ctl_add(rtd->card->snd_card, kctl);
+		/* add ELD ctl with the device number corresponding to the PCM stream */
+		kctl = snd_ctl_new1(&hdmi_codec_controls[i], dai->component);
+		if (!kctl)
+			return -ENOMEM;
+
+		kctl->id.device = rtd->pcm->device;
+		ret = snd_ctl_add(rtd->card->snd_card, kctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int hdmi_dai_probe(struct snd_soc_dai *dai)
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Maxime Ripard]

We're going to add more controls to support the IEC958 output, so let's
rework the control registration a bit to support more of them.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 43 ++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 1567ba196ab9..65bde6f0ea1c 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -620,21 +620,23 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |\
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
-static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
-			      struct snd_soc_dai *dai)
-{
-	struct snd_soc_dai_driver *drv = dai->driver;
-	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
-	struct snd_kcontrol *kctl;
-	struct snd_kcontrol_new hdmi_eld_ctl = {
-		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
+			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
 		.name	= "ELD",
 		.info	= hdmi_eld_ctl_info,
 		.get	= hdmi_eld_ctl_get,
-		.device	= rtd->pcm->device,
-	};
+	},
+};
+
+static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_dai_driver *drv = dai->driver;
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	unsigned int i;
 	int ret;
 
 	ret =  snd_pcm_add_chmap_ctls(rtd->pcm, SNDRV_PCM_STREAM_PLAYBACK,
@@ -651,12 +653,21 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
 	hcp->chmap_info->chmap = hdmi_codec_stereo_chmaps;
 	hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
 
-	/* add ELD ctl with the device number corresponding to the PCM stream */
-	kctl = snd_ctl_new1(&hdmi_eld_ctl, dai->component);
-	if (!kctl)
-		return -ENOMEM;
+	for (i = 0; i < ARRAY_SIZE(hdmi_codec_controls); i++) {
+		struct snd_kcontrol *kctl;
 
-	return snd_ctl_add(rtd->card->snd_card, kctl);
+		/* add ELD ctl with the device number corresponding to the PCM stream */
+		kctl = snd_ctl_new1(&hdmi_codec_controls[i], dai->component);
+		if (!kctl)
+			return -ENOMEM;
+
+		kctl->id.device = rtd->pcm->device;
+		ret = snd_ctl_add(rtd->card->snd_card, kctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int hdmi_dai_probe(struct snd_soc_dai *dai)
-- 
2.31.1

[PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

The IEC958 status bits can be exposed and modified by the userspace
through dedicated ALSA controls.

This patch implements those controls for the hdmi-codec driver. It
relies on a default value being setup at probe time that can later be
overridden by the control put.

The hw_params callback is then called with a buffer filled with the
proper bits for the current parameters being passed on so the underlying
driver can just reuse those bits as is.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 66 +++++++++++++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 65bde6f0ea1c..5d6324585a31 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -277,6 +277,7 @@ struct hdmi_codec_priv {
 	bool busy;
 	struct snd_soc_jack *jack;
 	unsigned int jack_status;
+	u8 iec_status[5];
 };
 
 static const struct snd_soc_dapm_widget hdmi_widgets[] = {
@@ -385,6 +386,47 @@ static int hdmi_codec_chmap_ctl_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int hdmi_codec_iec958_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_get(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(ucontrol->value.iec958.status, hcp->iec_status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_put(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(hcp->iec_status, ucontrol->value.iec958.status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_mask_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	memset(ucontrol->value.iec958.status, 0xff,
+	       sizeof_field(struct hdmi_codec_priv, iec_status));
+
+	return 0;
+}
+
 static int hdmi_codec_startup(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
@@ -459,8 +501,9 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
-						       sizeof(hp.iec.status));
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
+						     sizeof(hp.iec.status));
 	if (ret < 0) {
 		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
 			ret);
@@ -621,6 +664,20 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
 struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access = SNDRV_CTL_ELEM_ACCESS_READ,
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_mask_get,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_default_get,
+		.put = hdmi_codec_iec958_default_put,
+	},
 	{
 		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
 			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
@@ -873,6 +930,11 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	hcp->hcd = *hcd;
 	mutex_init(&hcp->lock);
 
+	ret = snd_pcm_create_iec958_consumer_default(hcp->iec_status,
+						     sizeof(hcp->iec_status));
+	if (ret < 0)
+		return ret;
+
 	daidrv = devm_kcalloc(dev, dai_count, sizeof(*daidrv), GFP_KERNEL);
 	if (!daidrv)
 		return -ENOMEM;
-- 
2.31.1

[PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

The IEC958 status bits can be exposed and modified by the userspace
through dedicated ALSA controls.

This patch implements those controls for the hdmi-codec driver. It
relies on a default value being setup at probe time that can later be
overridden by the control put.

The hw_params callback is then called with a buffer filled with the
proper bits for the current parameters being passed on so the underlying
driver can just reuse those bits as is.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 66 +++++++++++++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 65bde6f0ea1c..5d6324585a31 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -277,6 +277,7 @@ struct hdmi_codec_priv {
 	bool busy;
 	struct snd_soc_jack *jack;
 	unsigned int jack_status;
+	u8 iec_status[5];
 };
 
 static const struct snd_soc_dapm_widget hdmi_widgets[] = {
@@ -385,6 +386,47 @@ static int hdmi_codec_chmap_ctl_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int hdmi_codec_iec958_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_get(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(ucontrol->value.iec958.status, hcp->iec_status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_put(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(hcp->iec_status, ucontrol->value.iec958.status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_mask_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	memset(ucontrol->value.iec958.status, 0xff,
+	       sizeof_field(struct hdmi_codec_priv, iec_status));
+
+	return 0;
+}
+
 static int hdmi_codec_startup(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
@@ -459,8 +501,9 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
-						       sizeof(hp.iec.status));
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
+						     sizeof(hp.iec.status));
 	if (ret < 0) {
 		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
 			ret);
@@ -621,6 +664,20 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
 struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access = SNDRV_CTL_ELEM_ACCESS_READ,
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_mask_get,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_default_get,
+		.put = hdmi_codec_iec958_default_put,
+	},
 	{
 		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
 			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
@@ -873,6 +930,11 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	hcp->hcd = *hcd;
 	mutex_init(&hcp->lock);
 
+	ret = snd_pcm_create_iec958_consumer_default(hcp->iec_status,
+						     sizeof(hcp->iec_status));
+	if (ret < 0)
+		return ret;
+
 	daidrv = devm_kcalloc(dev, dai_count, sizeof(*daidrv), GFP_KERNEL);
 	if (!daidrv)
 		return -ENOMEM;
-- 
2.31.1

[PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

The IEC958 status bits can be exposed and modified by the userspace
through dedicated ALSA controls.

This patch implements those controls for the hdmi-codec driver. It
relies on a default value being setup at probe time that can later be
overridden by the control put.

The hw_params callback is then called with a buffer filled with the
proper bits for the current parameters being passed on so the underlying
driver can just reuse those bits as is.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 66 +++++++++++++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 65bde6f0ea1c..5d6324585a31 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -277,6 +277,7 @@ struct hdmi_codec_priv {
 	bool busy;
 	struct snd_soc_jack *jack;
 	unsigned int jack_status;
+	u8 iec_status[5];
 };
 
 static const struct snd_soc_dapm_widget hdmi_widgets[] = {
@@ -385,6 +386,47 @@ static int hdmi_codec_chmap_ctl_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int hdmi_codec_iec958_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_get(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(ucontrol->value.iec958.status, hcp->iec_status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_put(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(hcp->iec_status, ucontrol->value.iec958.status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_mask_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	memset(ucontrol->value.iec958.status, 0xff,
+	       sizeof_field(struct hdmi_codec_priv, iec_status));
+
+	return 0;
+}
+
 static int hdmi_codec_startup(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
@@ -459,8 +501,9 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
-						       sizeof(hp.iec.status));
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
+						     sizeof(hp.iec.status));
 	if (ret < 0) {
 		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
 			ret);
@@ -621,6 +664,20 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
 struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access = SNDRV_CTL_ELEM_ACCESS_READ,
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_mask_get,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_default_get,
+		.put = hdmi_codec_iec958_default_put,
+	},
 	{
 		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
 			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
@@ -873,6 +930,11 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	hcp->hcd = *hcd;
 	mutex_init(&hcp->lock);
 
+	ret = snd_pcm_create_iec958_consumer_default(hcp->iec_status,
+						     sizeof(hcp->iec_status));
+	if (ret < 0)
+		return ret;
+
 	daidrv = devm_kcalloc(dev, dai_count, sizeof(*daidrv), GFP_KERNEL);
 	if (!daidrv)
 		return -ENOMEM;
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

The IEC958 status bits can be exposed and modified by the userspace
through dedicated ALSA controls.

This patch implements those controls for the hdmi-codec driver. It
relies on a default value being setup at probe time that can later be
overridden by the control put.

The hw_params callback is then called with a buffer filled with the
proper bits for the current parameters being passed on so the underlying
driver can just reuse those bits as is.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 66 +++++++++++++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 65bde6f0ea1c..5d6324585a31 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -277,6 +277,7 @@ struct hdmi_codec_priv {
 	bool busy;
 	struct snd_soc_jack *jack;
 	unsigned int jack_status;
+	u8 iec_status[5];
 };
 
 static const struct snd_soc_dapm_widget hdmi_widgets[] = {
@@ -385,6 +386,47 @@ static int hdmi_codec_chmap_ctl_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int hdmi_codec_iec958_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_get(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(ucontrol->value.iec958.status, hcp->iec_status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_default_put(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+
+	memcpy(hcp->iec_status, ucontrol->value.iec958.status,
+	       sizeof(hcp->iec_status));
+
+	return 0;
+}
+
+static int hdmi_codec_iec958_mask_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	memset(ucontrol->value.iec958.status, 0xff,
+	       sizeof_field(struct hdmi_codec_priv, iec_status));
+
+	return 0;
+}
+
 static int hdmi_codec_startup(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
@@ -459,8 +501,9 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
-						       sizeof(hp.iec.status));
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
+						     sizeof(hp.iec.status));
 	if (ret < 0) {
 		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
 			ret);
@@ -621,6 +664,20 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
 struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access = SNDRV_CTL_ELEM_ACCESS_READ,
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_mask_get,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+		.info = hdmi_codec_iec958_info,
+		.get = hdmi_codec_iec958_default_get,
+		.put = hdmi_codec_iec958_default_put,
+	},
 	{
 		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
 			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
@@ -873,6 +930,11 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	hcp->hcd = *hcd;
 	mutex_init(&hcp->lock);
 
+	ret = snd_pcm_create_iec958_consumer_default(hcp->iec_status,
+						     sizeof(hcp->iec_status));
+	if (ret < 0)
+		return ret;
+
 	daidrv = devm_kcalloc(dev, dai_count, sizeof(*daidrv), GFP_KERNEL);
 	if (!daidrv)
 		return -ENOMEM;
-- 
2.31.1

[PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

The IEC958 status bit is usually set by the userspace after hw_params
has been called, so in order to use whatever is set by the userspace, we
need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
and mandate that either prepare or hw_params is implemented.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/hdmi-codec.h    |  12 +++-
 sound/soc/codecs/hdmi-codec.c | 112 ++++++++++++++++++++++++++--------
 2 files changed, 99 insertions(+), 25 deletions(-)

diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
index 4b3a1d374b90..4fc733c8c570 100644
--- a/include/sound/hdmi-codec.h
+++ b/include/sound/hdmi-codec.h
@@ -65,12 +65,22 @@ struct hdmi_codec_ops {
 
 	/*
 	 * Configures HDMI-encoder for audio stream.
-	 * Mandatory
+	 * Having either prepare or hw_params is mandatory.
 	 */
 	int (*hw_params)(struct device *dev, void *data,
 			 struct hdmi_codec_daifmt *fmt,
 			 struct hdmi_codec_params *hparms);
 
+	/*
+	 * Configures HDMI-encoder for audio stream. Can be called
+	 * multiple times for each setup.
+	 *
+	 * Having either prepare or hw_params is mandatory.
+	 */
+	int (*prepare)(struct device *dev, void *data,
+		       struct hdmi_codec_daifmt *fmt,
+		       struct hdmi_codec_params *hparms);
+
 	/*
 	 * Shuts down the audio stream.
 	 * Mandatory
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 5d6324585a31..a67c92032e11 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -481,6 +481,42 @@ static void hdmi_codec_shutdown(struct snd_pcm_substream *substream,
 	mutex_unlock(&hcp->lock);
 }
 
+static int hdmi_codec_fill_codec_params(struct snd_soc_dai *dai,
+					unsigned int sample_width,
+					unsigned int sample_rate,
+					unsigned int channels,
+					struct hdmi_codec_params *hp)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	int idx;
+
+	/* Select a channel allocation that matches with ELD and pcm channels */
+	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, channels);
+	if (idx < 0) {
+		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
+			idx);
+		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
+		return idx;
+	}
+
+	memset(hp, 0, sizeof(*hp));
+
+	hdmi_audio_infoframe_init(&hp->cea);
+	hp->cea.channels = channels;
+	hp->cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
+	hp->cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
+	hp->cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
+	hp->cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
+
+	hp->sample_width = sample_width;
+	hp->sample_rate = sample_rate;
+	hp->channels = channels;
+
+	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
+
+	return 0;
+}
+
 static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
@@ -495,13 +531,24 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 			.dig_subframe = { 0 },
 		}
 	};
-	int ret, idx;
+	int ret;
+
+	if (!hcp->hcd.ops->hw_params)
+		return 0;
 
 	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = hdmi_codec_fill_codec_params(dai,
+					   params_width(params),
+					   params_rate(params),
+					   params_channels(params),
+					   &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
 	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
 						     sizeof(hp.iec.status));
 	if (ret < 0) {
@@ -510,32 +557,47 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
-	hdmi_audio_infoframe_init(&hp.cea);
-	hp.cea.channels = params_channels(params);
-	hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-
-	/* Select a channel allocation that matches with ELD and pcm channels */
-	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, hp.cea.channels);
-	if (idx < 0) {
-		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
-			idx);
-		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
-		return idx;
-	}
-	hp.cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
-	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
-
-	hp.sample_width = params_width(params);
-	hp.sample_rate = params_rate(params);
-	hp.channels = params_channels(params);
-
 	cf->bit_fmt = params_format(params);
 	return hcp->hcd.ops->hw_params(dai->dev->parent, hcp->hcd.data,
 				       cf, &hp);
 }
 
+static int hdmi_codec_prepare(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	struct hdmi_codec_daifmt *cf = dai->playback_dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned int channels = runtime->channels;
+	unsigned int width = snd_pcm_format_width(runtime->format);
+	unsigned int rate = runtime->rate;
+	struct hdmi_codec_params hp;
+	int ret;
+
+	if (!hcp->hcd.ops->prepare)
+		return 0;
+
+	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
+		width, rate, channels);
+
+	ret = hdmi_codec_fill_codec_params(dai, width, rate, channels, &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
+	ret = snd_pcm_fill_iec958_consumer(runtime, hp.iec.status,
+					   sizeof(hp.iec.status));
+	if (ret < 0) {
+		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
+			ret);
+		return ret;
+	}
+
+	cf->bit_fmt = runtime->format;
+	return hcp->hcd.ops->prepare(dai->dev->parent, hcp->hcd.data,
+				     cf, &hp);
+}
+
 static int hdmi_codec_i2s_set_fmt(struct snd_soc_dai *dai,
 				  unsigned int fmt)
 {
@@ -627,6 +689,7 @@ static const struct snd_soc_dai_ops hdmi_codec_i2s_dai_ops = {
 	.startup	= hdmi_codec_startup,
 	.shutdown	= hdmi_codec_shutdown,
 	.hw_params	= hdmi_codec_hw_params,
+	.prepare	= hdmi_codec_prepare,
 	.set_fmt	= hdmi_codec_i2s_set_fmt,
 	.mute_stream	= hdmi_codec_mute,
 };
@@ -917,7 +980,8 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	}
 
 	dai_count = hcd->i2s + hcd->spdif;
-	if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params ||
+	if (dai_count < 1 || !hcd->ops ||
+	    (!hcd->ops->hw_params && !hcd->ops->prepare) ||
 	    !hcd->ops->audio_shutdown) {
 		dev_err(dev, "%s: Invalid parameters\n", __func__);
 		return -EINVAL;
-- 
2.31.1

[PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

The IEC958 status bit is usually set by the userspace after hw_params
has been called, so in order to use whatever is set by the userspace, we
need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
and mandate that either prepare or hw_params is implemented.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/hdmi-codec.h    |  12 +++-
 sound/soc/codecs/hdmi-codec.c | 112 ++++++++++++++++++++++++++--------
 2 files changed, 99 insertions(+), 25 deletions(-)

diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
index 4b3a1d374b90..4fc733c8c570 100644
--- a/include/sound/hdmi-codec.h
+++ b/include/sound/hdmi-codec.h
@@ -65,12 +65,22 @@ struct hdmi_codec_ops {
 
 	/*
 	 * Configures HDMI-encoder for audio stream.
-	 * Mandatory
+	 * Having either prepare or hw_params is mandatory.
 	 */
 	int (*hw_params)(struct device *dev, void *data,
 			 struct hdmi_codec_daifmt *fmt,
 			 struct hdmi_codec_params *hparms);
 
+	/*
+	 * Configures HDMI-encoder for audio stream. Can be called
+	 * multiple times for each setup.
+	 *
+	 * Having either prepare or hw_params is mandatory.
+	 */
+	int (*prepare)(struct device *dev, void *data,
+		       struct hdmi_codec_daifmt *fmt,
+		       struct hdmi_codec_params *hparms);
+
 	/*
 	 * Shuts down the audio stream.
 	 * Mandatory
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 5d6324585a31..a67c92032e11 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -481,6 +481,42 @@ static void hdmi_codec_shutdown(struct snd_pcm_substream *substream,
 	mutex_unlock(&hcp->lock);
 }
 
+static int hdmi_codec_fill_codec_params(struct snd_soc_dai *dai,
+					unsigned int sample_width,
+					unsigned int sample_rate,
+					unsigned int channels,
+					struct hdmi_codec_params *hp)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	int idx;
+
+	/* Select a channel allocation that matches with ELD and pcm channels */
+	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, channels);
+	if (idx < 0) {
+		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
+			idx);
+		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
+		return idx;
+	}
+
+	memset(hp, 0, sizeof(*hp));
+
+	hdmi_audio_infoframe_init(&hp->cea);
+	hp->cea.channels = channels;
+	hp->cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
+	hp->cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
+	hp->cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
+	hp->cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
+
+	hp->sample_width = sample_width;
+	hp->sample_rate = sample_rate;
+	hp->channels = channels;
+
+	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
+
+	return 0;
+}
+
 static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
@@ -495,13 +531,24 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 			.dig_subframe = { 0 },
 		}
 	};
-	int ret, idx;
+	int ret;
+
+	if (!hcp->hcd.ops->hw_params)
+		return 0;
 
 	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = hdmi_codec_fill_codec_params(dai,
+					   params_width(params),
+					   params_rate(params),
+					   params_channels(params),
+					   &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
 	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
 						     sizeof(hp.iec.status));
 	if (ret < 0) {
@@ -510,32 +557,47 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
-	hdmi_audio_infoframe_init(&hp.cea);
-	hp.cea.channels = params_channels(params);
-	hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-
-	/* Select a channel allocation that matches with ELD and pcm channels */
-	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, hp.cea.channels);
-	if (idx < 0) {
-		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
-			idx);
-		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
-		return idx;
-	}
-	hp.cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
-	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
-
-	hp.sample_width = params_width(params);
-	hp.sample_rate = params_rate(params);
-	hp.channels = params_channels(params);
-
 	cf->bit_fmt = params_format(params);
 	return hcp->hcd.ops->hw_params(dai->dev->parent, hcp->hcd.data,
 				       cf, &hp);
 }
 
+static int hdmi_codec_prepare(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	struct hdmi_codec_daifmt *cf = dai->playback_dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned int channels = runtime->channels;
+	unsigned int width = snd_pcm_format_width(runtime->format);
+	unsigned int rate = runtime->rate;
+	struct hdmi_codec_params hp;
+	int ret;
+
+	if (!hcp->hcd.ops->prepare)
+		return 0;
+
+	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
+		width, rate, channels);
+
+	ret = hdmi_codec_fill_codec_params(dai, width, rate, channels, &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
+	ret = snd_pcm_fill_iec958_consumer(runtime, hp.iec.status,
+					   sizeof(hp.iec.status));
+	if (ret < 0) {
+		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
+			ret);
+		return ret;
+	}
+
+	cf->bit_fmt = runtime->format;
+	return hcp->hcd.ops->prepare(dai->dev->parent, hcp->hcd.data,
+				     cf, &hp);
+}
+
 static int hdmi_codec_i2s_set_fmt(struct snd_soc_dai *dai,
 				  unsigned int fmt)
 {
@@ -627,6 +689,7 @@ static const struct snd_soc_dai_ops hdmi_codec_i2s_dai_ops = {
 	.startup	= hdmi_codec_startup,
 	.shutdown	= hdmi_codec_shutdown,
 	.hw_params	= hdmi_codec_hw_params,
+	.prepare	= hdmi_codec_prepare,
 	.set_fmt	= hdmi_codec_i2s_set_fmt,
 	.mute_stream	= hdmi_codec_mute,
 };
@@ -917,7 +980,8 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	}
 
 	dai_count = hcd->i2s + hcd->spdif;
-	if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params ||
+	if (dai_count < 1 || !hcd->ops ||
+	    (!hcd->ops->hw_params && !hcd->ops->prepare) ||
 	    !hcd->ops->audio_shutdown) {
 		dev_err(dev, "%s: Invalid parameters\n", __func__);
 		return -EINVAL;
-- 
2.31.1

[PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

The IEC958 status bit is usually set by the userspace after hw_params
has been called, so in order to use whatever is set by the userspace, we
need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
and mandate that either prepare or hw_params is implemented.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/hdmi-codec.h    |  12 +++-
 sound/soc/codecs/hdmi-codec.c | 112 ++++++++++++++++++++++++++--------
 2 files changed, 99 insertions(+), 25 deletions(-)

diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
index 4b3a1d374b90..4fc733c8c570 100644
--- a/include/sound/hdmi-codec.h
+++ b/include/sound/hdmi-codec.h
@@ -65,12 +65,22 @@ struct hdmi_codec_ops {
 
 	/*
 	 * Configures HDMI-encoder for audio stream.
-	 * Mandatory
+	 * Having either prepare or hw_params is mandatory.
 	 */
 	int (*hw_params)(struct device *dev, void *data,
 			 struct hdmi_codec_daifmt *fmt,
 			 struct hdmi_codec_params *hparms);
 
+	/*
+	 * Configures HDMI-encoder for audio stream. Can be called
+	 * multiple times for each setup.
+	 *
+	 * Having either prepare or hw_params is mandatory.
+	 */
+	int (*prepare)(struct device *dev, void *data,
+		       struct hdmi_codec_daifmt *fmt,
+		       struct hdmi_codec_params *hparms);
+
 	/*
 	 * Shuts down the audio stream.
 	 * Mandatory
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 5d6324585a31..a67c92032e11 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -481,6 +481,42 @@ static void hdmi_codec_shutdown(struct snd_pcm_substream *substream,
 	mutex_unlock(&hcp->lock);
 }
 
+static int hdmi_codec_fill_codec_params(struct snd_soc_dai *dai,
+					unsigned int sample_width,
+					unsigned int sample_rate,
+					unsigned int channels,
+					struct hdmi_codec_params *hp)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	int idx;
+
+	/* Select a channel allocation that matches with ELD and pcm channels */
+	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, channels);
+	if (idx < 0) {
+		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
+			idx);
+		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
+		return idx;
+	}
+
+	memset(hp, 0, sizeof(*hp));
+
+	hdmi_audio_infoframe_init(&hp->cea);
+	hp->cea.channels = channels;
+	hp->cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
+	hp->cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
+	hp->cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
+	hp->cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
+
+	hp->sample_width = sample_width;
+	hp->sample_rate = sample_rate;
+	hp->channels = channels;
+
+	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
+
+	return 0;
+}
+
 static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
@@ -495,13 +531,24 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 			.dig_subframe = { 0 },
 		}
 	};
-	int ret, idx;
+	int ret;
+
+	if (!hcp->hcd.ops->hw_params)
+		return 0;
 
 	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = hdmi_codec_fill_codec_params(dai,
+					   params_width(params),
+					   params_rate(params),
+					   params_channels(params),
+					   &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
 	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
 						     sizeof(hp.iec.status));
 	if (ret < 0) {
@@ -510,32 +557,47 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
-	hdmi_audio_infoframe_init(&hp.cea);
-	hp.cea.channels = params_channels(params);
-	hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-
-	/* Select a channel allocation that matches with ELD and pcm channels */
-	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, hp.cea.channels);
-	if (idx < 0) {
-		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
-			idx);
-		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
-		return idx;
-	}
-	hp.cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
-	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
-
-	hp.sample_width = params_width(params);
-	hp.sample_rate = params_rate(params);
-	hp.channels = params_channels(params);
-
 	cf->bit_fmt = params_format(params);
 	return hcp->hcd.ops->hw_params(dai->dev->parent, hcp->hcd.data,
 				       cf, &hp);
 }
 
+static int hdmi_codec_prepare(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	struct hdmi_codec_daifmt *cf = dai->playback_dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned int channels = runtime->channels;
+	unsigned int width = snd_pcm_format_width(runtime->format);
+	unsigned int rate = runtime->rate;
+	struct hdmi_codec_params hp;
+	int ret;
+
+	if (!hcp->hcd.ops->prepare)
+		return 0;
+
+	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
+		width, rate, channels);
+
+	ret = hdmi_codec_fill_codec_params(dai, width, rate, channels, &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
+	ret = snd_pcm_fill_iec958_consumer(runtime, hp.iec.status,
+					   sizeof(hp.iec.status));
+	if (ret < 0) {
+		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
+			ret);
+		return ret;
+	}
+
+	cf->bit_fmt = runtime->format;
+	return hcp->hcd.ops->prepare(dai->dev->parent, hcp->hcd.data,
+				     cf, &hp);
+}
+
 static int hdmi_codec_i2s_set_fmt(struct snd_soc_dai *dai,
 				  unsigned int fmt)
 {
@@ -627,6 +689,7 @@ static const struct snd_soc_dai_ops hdmi_codec_i2s_dai_ops = {
 	.startup	= hdmi_codec_startup,
 	.shutdown	= hdmi_codec_shutdown,
 	.hw_params	= hdmi_codec_hw_params,
+	.prepare	= hdmi_codec_prepare,
 	.set_fmt	= hdmi_codec_i2s_set_fmt,
 	.mute_stream	= hdmi_codec_mute,
 };
@@ -917,7 +980,8 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	}
 
 	dai_count = hcd->i2s + hcd->spdif;
-	if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params ||
+	if (dai_count < 1 || !hcd->ops ||
+	    (!hcd->ops->hw_params && !hcd->ops->prepare) ||
 	    !hcd->ops->audio_shutdown) {
 		dev_err(dev, "%s: Invalid parameters\n", __func__);
 		return -EINVAL;
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

The IEC958 status bit is usually set by the userspace after hw_params
has been called, so in order to use whatever is set by the userspace, we
need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
and mandate that either prepare or hw_params is implemented.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/hdmi-codec.h    |  12 +++-
 sound/soc/codecs/hdmi-codec.c | 112 ++++++++++++++++++++++++++--------
 2 files changed, 99 insertions(+), 25 deletions(-)

diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
index 4b3a1d374b90..4fc733c8c570 100644
--- a/include/sound/hdmi-codec.h
+++ b/include/sound/hdmi-codec.h
@@ -65,12 +65,22 @@ struct hdmi_codec_ops {
 
 	/*
 	 * Configures HDMI-encoder for audio stream.
-	 * Mandatory
+	 * Having either prepare or hw_params is mandatory.
 	 */
 	int (*hw_params)(struct device *dev, void *data,
 			 struct hdmi_codec_daifmt *fmt,
 			 struct hdmi_codec_params *hparms);
 
+	/*
+	 * Configures HDMI-encoder for audio stream. Can be called
+	 * multiple times for each setup.
+	 *
+	 * Having either prepare or hw_params is mandatory.
+	 */
+	int (*prepare)(struct device *dev, void *data,
+		       struct hdmi_codec_daifmt *fmt,
+		       struct hdmi_codec_params *hparms);
+
 	/*
 	 * Shuts down the audio stream.
 	 * Mandatory
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 5d6324585a31..a67c92032e11 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -481,6 +481,42 @@ static void hdmi_codec_shutdown(struct snd_pcm_substream *substream,
 	mutex_unlock(&hcp->lock);
 }
 
+static int hdmi_codec_fill_codec_params(struct snd_soc_dai *dai,
+					unsigned int sample_width,
+					unsigned int sample_rate,
+					unsigned int channels,
+					struct hdmi_codec_params *hp)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	int idx;
+
+	/* Select a channel allocation that matches with ELD and pcm channels */
+	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, channels);
+	if (idx < 0) {
+		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
+			idx);
+		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
+		return idx;
+	}
+
+	memset(hp, 0, sizeof(*hp));
+
+	hdmi_audio_infoframe_init(&hp->cea);
+	hp->cea.channels = channels;
+	hp->cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
+	hp->cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
+	hp->cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
+	hp->cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
+
+	hp->sample_width = sample_width;
+	hp->sample_rate = sample_rate;
+	hp->channels = channels;
+
+	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
+
+	return 0;
+}
+
 static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
@@ -495,13 +531,24 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 			.dig_subframe = { 0 },
 		}
 	};
-	int ret, idx;
+	int ret;
+
+	if (!hcp->hcd.ops->hw_params)
+		return 0;
 
 	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
 		params_width(params), params_rate(params),
 		params_channels(params));
 
-	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
+	ret = hdmi_codec_fill_codec_params(dai,
+					   params_width(params),
+					   params_rate(params),
+					   params_channels(params),
+					   &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
 	ret = snd_pcm_fill_iec958_consumer_hw_params(params, hp.iec.status,
 						     sizeof(hp.iec.status));
 	if (ret < 0) {
@@ -510,32 +557,47 @@ static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
-	hdmi_audio_infoframe_init(&hp.cea);
-	hp.cea.channels = params_channels(params);
-	hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-
-	/* Select a channel allocation that matches with ELD and pcm channels */
-	idx = hdmi_codec_get_ch_alloc_table_idx(hcp, hp.cea.channels);
-	if (idx < 0) {
-		dev_err(dai->dev, "Not able to map channels to speakers (%d)\n",
-			idx);
-		hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
-		return idx;
-	}
-	hp.cea.channel_allocation = hdmi_codec_channel_alloc[idx].ca_id;
-	hcp->chmap_idx = hdmi_codec_channel_alloc[idx].ca_id;
-
-	hp.sample_width = params_width(params);
-	hp.sample_rate = params_rate(params);
-	hp.channels = params_channels(params);
-
 	cf->bit_fmt = params_format(params);
 	return hcp->hcd.ops->hw_params(dai->dev->parent, hcp->hcd.data,
 				       cf, &hp);
 }
 
+static int hdmi_codec_prepare(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	struct hdmi_codec_daifmt *cf = dai->playback_dma_data;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned int channels = runtime->channels;
+	unsigned int width = snd_pcm_format_width(runtime->format);
+	unsigned int rate = runtime->rate;
+	struct hdmi_codec_params hp;
+	int ret;
+
+	if (!hcp->hcd.ops->prepare)
+		return 0;
+
+	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
+		width, rate, channels);
+
+	ret = hdmi_codec_fill_codec_params(dai, width, rate, channels, &hp);
+	if (ret < 0)
+		return ret;
+
+	memcpy(hp.iec.status, hcp->iec_status, sizeof(hp.iec.status));
+	ret = snd_pcm_fill_iec958_consumer(runtime, hp.iec.status,
+					   sizeof(hp.iec.status));
+	if (ret < 0) {
+		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
+			ret);
+		return ret;
+	}
+
+	cf->bit_fmt = runtime->format;
+	return hcp->hcd.ops->prepare(dai->dev->parent, hcp->hcd.data,
+				     cf, &hp);
+}
+
 static int hdmi_codec_i2s_set_fmt(struct snd_soc_dai *dai,
 				  unsigned int fmt)
 {
@@ -627,6 +689,7 @@ static const struct snd_soc_dai_ops hdmi_codec_i2s_dai_ops = {
 	.startup	= hdmi_codec_startup,
 	.shutdown	= hdmi_codec_shutdown,
 	.hw_params	= hdmi_codec_hw_params,
+	.prepare	= hdmi_codec_prepare,
 	.set_fmt	= hdmi_codec_i2s_set_fmt,
 	.mute_stream	= hdmi_codec_mute,
 };
@@ -917,7 +980,8 @@ static int hdmi_codec_probe(struct platform_device *pdev)
 	}
 
 	dai_count = hcd->i2s + hcd->spdif;
-	if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params ||
+	if (dai_count < 1 || !hcd->ops ||
+	    (!hcd->ops->hw_params && !hcd->ops->prepare) ||
 	    !hcd->ops->audio_shutdown) {
 		dev_err(dev, "%s: Invalid parameters\n", __func__);
 		return -EINVAL;
-- 
2.31.1

[PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Symptom is random switching of speakers when using multichannel.

Repeatedly running speakertest -c8 occasionally starts with
channels jumbled. This is fixed with HD_CTL_WHOLSMP.

The other bit looks beneficial and apears harmless in testing so
I'd suggest adding it too.

Documentation says: HD_CTL_WHILSMP_SET
Wait for whole sample. When this bit is set MAI transmit will start
only when there is at least one whole sample available in the fifo.

Documentation says: HD_CTL_CHALIGN_SET
Channel Align When Overflow. This bit is used to realign the audio
channels in case of an overflow.
If this bit is set, after the detection of an overflow, equal
amount of dummy words to the missing words will be written to fifo,
filling up the broken sample and maintaining alignment.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c27b287d2053..212b5df11d73 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1267,7 +1267,9 @@ static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
 		HDMI_WRITE(HDMI_MAI_CTL,
 			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
 					 VC4_HD_MAI_CTL_CHNUM) |
-			   VC4_HD_MAI_CTL_ENABLE);
+					 VC4_HD_MAI_CTL_WHOLSMP |
+					 VC4_HD_MAI_CTL_CHALIGN |
+					 VC4_HD_MAI_CTL_ENABLE);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		HDMI_WRITE(HDMI_MAI_CTL,
-- 
2.31.1

[PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Symptom is random switching of speakers when using multichannel.

Repeatedly running speakertest -c8 occasionally starts with
channels jumbled. This is fixed with HD_CTL_WHOLSMP.

The other bit looks beneficial and apears harmless in testing so
I'd suggest adding it too.

Documentation says: HD_CTL_WHILSMP_SET
Wait for whole sample. When this bit is set MAI transmit will start
only when there is at least one whole sample available in the fifo.

Documentation says: HD_CTL_CHALIGN_SET
Channel Align When Overflow. This bit is used to realign the audio
channels in case of an overflow.
If this bit is set, after the detection of an overflow, equal
amount of dummy words to the missing words will be written to fifo,
filling up the broken sample and maintaining alignment.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c27b287d2053..212b5df11d73 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1267,7 +1267,9 @@ static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
 		HDMI_WRITE(HDMI_MAI_CTL,
 			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
 					 VC4_HD_MAI_CTL_CHNUM) |
-			   VC4_HD_MAI_CTL_ENABLE);
+					 VC4_HD_MAI_CTL_WHOLSMP |
+					 VC4_HD_MAI_CTL_CHALIGN |
+					 VC4_HD_MAI_CTL_ENABLE);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		HDMI_WRITE(HDMI_MAI_CTL,
-- 
2.31.1

[PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Symptom is random switching of speakers when using multichannel.

Repeatedly running speakertest -c8 occasionally starts with
channels jumbled. This is fixed with HD_CTL_WHOLSMP.

The other bit looks beneficial and apears harmless in testing so
I'd suggest adding it too.

Documentation says: HD_CTL_WHILSMP_SET
Wait for whole sample. When this bit is set MAI transmit will start
only when there is at least one whole sample available in the fifo.

Documentation says: HD_CTL_CHALIGN_SET
Channel Align When Overflow. This bit is used to realign the audio
channels in case of an overflow.
If this bit is set, after the detection of an overflow, equal
amount of dummy words to the missing words will be written to fifo,
filling up the broken sample and maintaining alignment.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c27b287d2053..212b5df11d73 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1267,7 +1267,9 @@ static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
 		HDMI_WRITE(HDMI_MAI_CTL,
 			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
 					 VC4_HD_MAI_CTL_CHNUM) |
-			   VC4_HD_MAI_CTL_ENABLE);
+					 VC4_HD_MAI_CTL_WHOLSMP |
+					 VC4_HD_MAI_CTL_CHALIGN |
+					 VC4_HD_MAI_CTL_ENABLE);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		HDMI_WRITE(HDMI_MAI_CTL,
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Symptom is random switching of speakers when using multichannel.

Repeatedly running speakertest -c8 occasionally starts with
channels jumbled. This is fixed with HD_CTL_WHOLSMP.

The other bit looks beneficial and apears harmless in testing so
I'd suggest adding it too.

Documentation says: HD_CTL_WHILSMP_SET
Wait for whole sample. When this bit is set MAI transmit will start
only when there is at least one whole sample available in the fifo.

Documentation says: HD_CTL_CHALIGN_SET
Channel Align When Overflow. This bit is used to realign the audio
channels in case of an overflow.
If this bit is set, after the detection of an overflow, equal
amount of dummy words to the missing words will be written to fifo,
filling up the broken sample and maintaining alignment.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c27b287d2053..212b5df11d73 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1267,7 +1267,9 @@ static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
 		HDMI_WRITE(HDMI_MAI_CTL,
 			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
 					 VC4_HD_MAI_CTL_CHNUM) |
-			   VC4_HD_MAI_CTL_ENABLE);
+					 VC4_HD_MAI_CTL_WHOLSMP |
+					 VC4_HD_MAI_CTL_CHALIGN |
+					 VC4_HD_MAI_CTL_ENABLE);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		HDMI_WRITE(HDMI_MAI_CTL,
-- 
2.31.1

[PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

The hardware uses this for generating the right audio
data island packets when using formats other than PCM

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 48 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_regs.h | 30 +++++++++++++++++++++
 2 files changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 212b5df11d73..2c2f21ee0451 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1181,6 +1181,44 @@ static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
 	vc4_hdmi->audio.substream = NULL;
 }
 
+static int sample_rate_to_mai_fmt(int samplerate)
+{
+	switch (samplerate) {
+	case 8000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_8000;
+	case 11025:
+		return VC4_HDMI_MAI_SAMPLE_RATE_11025;
+	case 12000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_12000;
+	case 16000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_16000;
+	case 22050:
+		return VC4_HDMI_MAI_SAMPLE_RATE_22050;
+	case 24000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_24000;
+	case 32000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_32000;
+	case 44100:
+		return VC4_HDMI_MAI_SAMPLE_RATE_44100;
+	case 48000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_48000;
+	case 64000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_64000;
+	case 88200:
+		return VC4_HDMI_MAI_SAMPLE_RATE_88200;
+	case 96000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_96000;
+	case 128000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_128000;
+	case 176400:
+		return VC4_HDMI_MAI_SAMPLE_RATE_176400;
+	case 192000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_192000;
+	default:
+		return VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED;
+	}
+}
+
 /* HDMI audio codec callbacks */
 static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params,
@@ -1191,6 +1229,8 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
+	u32 mai_audio_format;
+	u32 mai_sample_rate;
 
 	if (substream != vc4_hdmi->audio.substream)
 		return -EINVAL;
@@ -1211,6 +1251,14 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
+	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	HDMI_WRITE(HDMI_MAI_FMT,
+		   VC4_SET_FIELD(mai_sample_rate,
+				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
+		   VC4_SET_FIELD(mai_audio_format,
+				 VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT));
+
 	/* The B frame identifier should match the value used by alsa-lib (8) */
 	audio_packet_config =
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_SAMPLE_FLAT |
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index be2c32a519b3..489f921ef44d 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -516,6 +516,36 @@
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_MASK			VC4_MASK(7, 0)
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_SHIFT			0
 
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_MASK		VC4_MASK(23, 16)
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_SHIFT		16
+
+enum {
+	VC4_HDMI_MAI_FORMAT_PCM = 2,
+	VC4_HDMI_MAI_FORMAT_HBR = 200,
+};
+
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_MASK		VC4_MASK(15, 8)
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_SHIFT		8
+
+enum {
+	VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED = 0,
+	VC4_HDMI_MAI_SAMPLE_RATE_8000 = 1,
+	VC4_HDMI_MAI_SAMPLE_RATE_11025 = 2,
+	VC4_HDMI_MAI_SAMPLE_RATE_12000 = 3,
+	VC4_HDMI_MAI_SAMPLE_RATE_16000 = 4,
+	VC4_HDMI_MAI_SAMPLE_RATE_22050 = 5,
+	VC4_HDMI_MAI_SAMPLE_RATE_24000 = 6,
+	VC4_HDMI_MAI_SAMPLE_RATE_32000 = 7,
+	VC4_HDMI_MAI_SAMPLE_RATE_44100 = 8,
+	VC4_HDMI_MAI_SAMPLE_RATE_48000 = 9,
+	VC4_HDMI_MAI_SAMPLE_RATE_64000 = 10,
+	VC4_HDMI_MAI_SAMPLE_RATE_88200 = 11,
+	VC4_HDMI_MAI_SAMPLE_RATE_96000 = 12,
+	VC4_HDMI_MAI_SAMPLE_RATE_128000 = 13,
+	VC4_HDMI_MAI_SAMPLE_RATE_176400 = 14,
+	VC4_HDMI_MAI_SAMPLE_RATE_192000 = 15,
+};
+
 # define VC4_HDMI_RAM_PACKET_ENABLE		BIT(16)
 
 /* When set, the CTS_PERIOD counts based on MAI bus sync pulse instead
-- 
2.31.1

[PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

The hardware uses this for generating the right audio
data island packets when using formats other than PCM

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 48 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_regs.h | 30 +++++++++++++++++++++
 2 files changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 212b5df11d73..2c2f21ee0451 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1181,6 +1181,44 @@ static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
 	vc4_hdmi->audio.substream = NULL;
 }
 
+static int sample_rate_to_mai_fmt(int samplerate)
+{
+	switch (samplerate) {
+	case 8000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_8000;
+	case 11025:
+		return VC4_HDMI_MAI_SAMPLE_RATE_11025;
+	case 12000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_12000;
+	case 16000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_16000;
+	case 22050:
+		return VC4_HDMI_MAI_SAMPLE_RATE_22050;
+	case 24000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_24000;
+	case 32000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_32000;
+	case 44100:
+		return VC4_HDMI_MAI_SAMPLE_RATE_44100;
+	case 48000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_48000;
+	case 64000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_64000;
+	case 88200:
+		return VC4_HDMI_MAI_SAMPLE_RATE_88200;
+	case 96000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_96000;
+	case 128000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_128000;
+	case 176400:
+		return VC4_HDMI_MAI_SAMPLE_RATE_176400;
+	case 192000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_192000;
+	default:
+		return VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED;
+	}
+}
+
 /* HDMI audio codec callbacks */
 static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params,
@@ -1191,6 +1229,8 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
+	u32 mai_audio_format;
+	u32 mai_sample_rate;
 
 	if (substream != vc4_hdmi->audio.substream)
 		return -EINVAL;
@@ -1211,6 +1251,14 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
+	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	HDMI_WRITE(HDMI_MAI_FMT,
+		   VC4_SET_FIELD(mai_sample_rate,
+				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
+		   VC4_SET_FIELD(mai_audio_format,
+				 VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT));
+
 	/* The B frame identifier should match the value used by alsa-lib (8) */
 	audio_packet_config =
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_SAMPLE_FLAT |
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index be2c32a519b3..489f921ef44d 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -516,6 +516,36 @@
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_MASK			VC4_MASK(7, 0)
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_SHIFT			0
 
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_MASK		VC4_MASK(23, 16)
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_SHIFT		16
+
+enum {
+	VC4_HDMI_MAI_FORMAT_PCM = 2,
+	VC4_HDMI_MAI_FORMAT_HBR = 200,
+};
+
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_MASK		VC4_MASK(15, 8)
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_SHIFT		8
+
+enum {
+	VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED = 0,
+	VC4_HDMI_MAI_SAMPLE_RATE_8000 = 1,
+	VC4_HDMI_MAI_SAMPLE_RATE_11025 = 2,
+	VC4_HDMI_MAI_SAMPLE_RATE_12000 = 3,
+	VC4_HDMI_MAI_SAMPLE_RATE_16000 = 4,
+	VC4_HDMI_MAI_SAMPLE_RATE_22050 = 5,
+	VC4_HDMI_MAI_SAMPLE_RATE_24000 = 6,
+	VC4_HDMI_MAI_SAMPLE_RATE_32000 = 7,
+	VC4_HDMI_MAI_SAMPLE_RATE_44100 = 8,
+	VC4_HDMI_MAI_SAMPLE_RATE_48000 = 9,
+	VC4_HDMI_MAI_SAMPLE_RATE_64000 = 10,
+	VC4_HDMI_MAI_SAMPLE_RATE_88200 = 11,
+	VC4_HDMI_MAI_SAMPLE_RATE_96000 = 12,
+	VC4_HDMI_MAI_SAMPLE_RATE_128000 = 13,
+	VC4_HDMI_MAI_SAMPLE_RATE_176400 = 14,
+	VC4_HDMI_MAI_SAMPLE_RATE_192000 = 15,
+};
+
 # define VC4_HDMI_RAM_PACKET_ENABLE		BIT(16)
 
 /* When set, the CTS_PERIOD counts based on MAI bus sync pulse instead
-- 
2.31.1

[PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

The hardware uses this for generating the right audio
data island packets when using formats other than PCM

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 48 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_regs.h | 30 +++++++++++++++++++++
 2 files changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 212b5df11d73..2c2f21ee0451 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1181,6 +1181,44 @@ static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
 	vc4_hdmi->audio.substream = NULL;
 }
 
+static int sample_rate_to_mai_fmt(int samplerate)
+{
+	switch (samplerate) {
+	case 8000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_8000;
+	case 11025:
+		return VC4_HDMI_MAI_SAMPLE_RATE_11025;
+	case 12000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_12000;
+	case 16000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_16000;
+	case 22050:
+		return VC4_HDMI_MAI_SAMPLE_RATE_22050;
+	case 24000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_24000;
+	case 32000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_32000;
+	case 44100:
+		return VC4_HDMI_MAI_SAMPLE_RATE_44100;
+	case 48000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_48000;
+	case 64000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_64000;
+	case 88200:
+		return VC4_HDMI_MAI_SAMPLE_RATE_88200;
+	case 96000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_96000;
+	case 128000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_128000;
+	case 176400:
+		return VC4_HDMI_MAI_SAMPLE_RATE_176400;
+	case 192000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_192000;
+	default:
+		return VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED;
+	}
+}
+
 /* HDMI audio codec callbacks */
 static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params,
@@ -1191,6 +1229,8 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
+	u32 mai_audio_format;
+	u32 mai_sample_rate;
 
 	if (substream != vc4_hdmi->audio.substream)
 		return -EINVAL;
@@ -1211,6 +1251,14 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
+	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	HDMI_WRITE(HDMI_MAI_FMT,
+		   VC4_SET_FIELD(mai_sample_rate,
+				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
+		   VC4_SET_FIELD(mai_audio_format,
+				 VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT));
+
 	/* The B frame identifier should match the value used by alsa-lib (8) */
 	audio_packet_config =
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_SAMPLE_FLAT |
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index be2c32a519b3..489f921ef44d 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -516,6 +516,36 @@
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_MASK			VC4_MASK(7, 0)
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_SHIFT			0
 
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_MASK		VC4_MASK(23, 16)
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_SHIFT		16
+
+enum {
+	VC4_HDMI_MAI_FORMAT_PCM = 2,
+	VC4_HDMI_MAI_FORMAT_HBR = 200,
+};
+
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_MASK		VC4_MASK(15, 8)
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_SHIFT		8
+
+enum {
+	VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED = 0,
+	VC4_HDMI_MAI_SAMPLE_RATE_8000 = 1,
+	VC4_HDMI_MAI_SAMPLE_RATE_11025 = 2,
+	VC4_HDMI_MAI_SAMPLE_RATE_12000 = 3,
+	VC4_HDMI_MAI_SAMPLE_RATE_16000 = 4,
+	VC4_HDMI_MAI_SAMPLE_RATE_22050 = 5,
+	VC4_HDMI_MAI_SAMPLE_RATE_24000 = 6,
+	VC4_HDMI_MAI_SAMPLE_RATE_32000 = 7,
+	VC4_HDMI_MAI_SAMPLE_RATE_44100 = 8,
+	VC4_HDMI_MAI_SAMPLE_RATE_48000 = 9,
+	VC4_HDMI_MAI_SAMPLE_RATE_64000 = 10,
+	VC4_HDMI_MAI_SAMPLE_RATE_88200 = 11,
+	VC4_HDMI_MAI_SAMPLE_RATE_96000 = 12,
+	VC4_HDMI_MAI_SAMPLE_RATE_128000 = 13,
+	VC4_HDMI_MAI_SAMPLE_RATE_176400 = 14,
+	VC4_HDMI_MAI_SAMPLE_RATE_192000 = 15,
+};
+
 # define VC4_HDMI_RAM_PACKET_ENABLE		BIT(16)
 
 /* When set, the CTS_PERIOD counts based on MAI bus sync pulse instead
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

The hardware uses this for generating the right audio
data island packets when using formats other than PCM

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 48 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_regs.h | 30 +++++++++++++++++++++
 2 files changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 212b5df11d73..2c2f21ee0451 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1181,6 +1181,44 @@ static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
 	vc4_hdmi->audio.substream = NULL;
 }
 
+static int sample_rate_to_mai_fmt(int samplerate)
+{
+	switch (samplerate) {
+	case 8000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_8000;
+	case 11025:
+		return VC4_HDMI_MAI_SAMPLE_RATE_11025;
+	case 12000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_12000;
+	case 16000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_16000;
+	case 22050:
+		return VC4_HDMI_MAI_SAMPLE_RATE_22050;
+	case 24000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_24000;
+	case 32000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_32000;
+	case 44100:
+		return VC4_HDMI_MAI_SAMPLE_RATE_44100;
+	case 48000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_48000;
+	case 64000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_64000;
+	case 88200:
+		return VC4_HDMI_MAI_SAMPLE_RATE_88200;
+	case 96000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_96000;
+	case 128000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_128000;
+	case 176400:
+		return VC4_HDMI_MAI_SAMPLE_RATE_176400;
+	case 192000:
+		return VC4_HDMI_MAI_SAMPLE_RATE_192000;
+	default:
+		return VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED;
+	}
+}
+
 /* HDMI audio codec callbacks */
 static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 				    struct snd_pcm_hw_params *params,
@@ -1191,6 +1229,8 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
+	u32 mai_audio_format;
+	u32 mai_sample_rate;
 
 	if (substream != vc4_hdmi->audio.substream)
 		return -EINVAL;
@@ -1211,6 +1251,14 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
+	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	HDMI_WRITE(HDMI_MAI_FMT,
+		   VC4_SET_FIELD(mai_sample_rate,
+				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
+		   VC4_SET_FIELD(mai_audio_format,
+				 VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT));
+
 	/* The B frame identifier should match the value used by alsa-lib (8) */
 	audio_packet_config =
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_SAMPLE_FLAT |
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index be2c32a519b3..489f921ef44d 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -516,6 +516,36 @@
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_MASK			VC4_MASK(7, 0)
 # define VC4_HDMI_AUDIO_PACKET_CEA_MASK_SHIFT			0
 
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_MASK		VC4_MASK(23, 16)
+# define VC4_HDMI_MAI_FORMAT_AUDIO_FORMAT_SHIFT		16
+
+enum {
+	VC4_HDMI_MAI_FORMAT_PCM = 2,
+	VC4_HDMI_MAI_FORMAT_HBR = 200,
+};
+
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_MASK		VC4_MASK(15, 8)
+# define VC4_HDMI_MAI_FORMAT_SAMPLE_RATE_SHIFT		8
+
+enum {
+	VC4_HDMI_MAI_SAMPLE_RATE_NOT_INDICATED = 0,
+	VC4_HDMI_MAI_SAMPLE_RATE_8000 = 1,
+	VC4_HDMI_MAI_SAMPLE_RATE_11025 = 2,
+	VC4_HDMI_MAI_SAMPLE_RATE_12000 = 3,
+	VC4_HDMI_MAI_SAMPLE_RATE_16000 = 4,
+	VC4_HDMI_MAI_SAMPLE_RATE_22050 = 5,
+	VC4_HDMI_MAI_SAMPLE_RATE_24000 = 6,
+	VC4_HDMI_MAI_SAMPLE_RATE_32000 = 7,
+	VC4_HDMI_MAI_SAMPLE_RATE_44100 = 8,
+	VC4_HDMI_MAI_SAMPLE_RATE_48000 = 9,
+	VC4_HDMI_MAI_SAMPLE_RATE_64000 = 10,
+	VC4_HDMI_MAI_SAMPLE_RATE_88200 = 11,
+	VC4_HDMI_MAI_SAMPLE_RATE_96000 = 12,
+	VC4_HDMI_MAI_SAMPLE_RATE_128000 = 13,
+	VC4_HDMI_MAI_SAMPLE_RATE_176400 = 14,
+	VC4_HDMI_MAI_SAMPLE_RATE_192000 = 15,
+};
+
 # define VC4_HDMI_RAM_PACKET_ENABLE		BIT(16)
 
 /* When set, the CTS_PERIOD counts based on MAI bus sync pulse instead
-- 
2.31.1

[PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Without this bit set, HDMI_MAI_FORMAT doesn't pick up
the format and samplerate from DVP_CFG_MAI0_FMT and you
can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 2c2f21ee0451..0cf9949a749f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1288,6 +1288,7 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
+		   VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE |
 		   VC4_SET_FIELD(channel_mask, VC4_HDMI_MAI_CHANNEL_MASK));
 
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
-- 
2.31.1

[PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Without this bit set, HDMI_MAI_FORMAT doesn't pick up
the format and samplerate from DVP_CFG_MAI0_FMT and you
can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 2c2f21ee0451..0cf9949a749f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1288,6 +1288,7 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
+		   VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE |
 		   VC4_SET_FIELD(channel_mask, VC4_HDMI_MAI_CHANNEL_MASK));
 
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
-- 
2.31.1

[PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Without this bit set, HDMI_MAI_FORMAT doesn't pick up
the format and samplerate from DVP_CFG_MAI0_FMT and you
can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 2c2f21ee0451..0cf9949a749f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1288,6 +1288,7 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
+		   VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE |
 		   VC4_SET_FIELD(channel_mask, VC4_HDMI_MAI_CHANNEL_MASK));
 
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Without this bit set, HDMI_MAI_FORMAT doesn't pick up
the format and samplerate from DVP_CFG_MAI0_FMT and you
can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 2c2f21ee0451..0cf9949a749f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1288,6 +1288,7 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
+		   VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE |
 		   VC4_SET_FIELD(channel_mask, VC4_HDMI_MAI_CHANNEL_MASK));
 
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
-- 
2.31.1

[PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

This was a workaround for bugs in hardware on earlier Pi models
and wasn't totally successful.

It makes audio quality worse on a Pi4 at the higher sample rates

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0cf9949a749f..b7e3bd89e237 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1269,22 +1269,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
-	/* Set the MAI threshold.  This logic mimics the firmware's. */
-	if (vc4_hdmi->audio.samplerate > 96000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else if (vc4_hdmi->audio.samplerate > 48000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x14, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
-	}
+	/* Set the MAI threshold */
+	HDMI_WRITE(HDMI_MAI_THR,
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
-- 
2.31.1

[PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

This was a workaround for bugs in hardware on earlier Pi models
and wasn't totally successful.

It makes audio quality worse on a Pi4 at the higher sample rates

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0cf9949a749f..b7e3bd89e237 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1269,22 +1269,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
-	/* Set the MAI threshold.  This logic mimics the firmware's. */
-	if (vc4_hdmi->audio.samplerate > 96000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else if (vc4_hdmi->audio.samplerate > 48000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x14, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
-	}
+	/* Set the MAI threshold */
+	HDMI_WRITE(HDMI_MAI_THR,
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
-- 
2.31.1

[PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

This was a workaround for bugs in hardware on earlier Pi models
and wasn't totally successful.

It makes audio quality worse on a Pi4 at the higher sample rates

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0cf9949a749f..b7e3bd89e237 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1269,22 +1269,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
-	/* Set the MAI threshold.  This logic mimics the firmware's. */
-	if (vc4_hdmi->audio.samplerate > 96000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else if (vc4_hdmi->audio.samplerate > 48000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x14, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
-	}
+	/* Set the MAI threshold */
+	HDMI_WRITE(HDMI_MAI_THR,
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

This was a workaround for bugs in hardware on earlier Pi models
and wasn't totally successful.

It makes audio quality worse on a Pi4 at the higher sample rates

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0cf9949a749f..b7e3bd89e237 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1269,22 +1269,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
-	/* Set the MAI threshold.  This logic mimics the firmware's. */
-	if (vc4_hdmi->audio.samplerate > 96000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else if (vc4_hdmi->audio.samplerate > 48000) {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x14, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
-	} else {
-		HDMI_WRITE(HDMI_MAI_THR,
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
-			   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
-	}
+	/* Set the MAI threshold */
+	HDMI_WRITE(HDMI_MAI_THR,
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
+		   VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
 
 	HDMI_WRITE(HDMI_MAI_CONFIG,
 		   VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
-- 
2.31.1

[PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

The hdmi-codec brings a lot of advanced features, including the HDMI
channel mapping. Let's use it in our driver instead of our own codec.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/Kconfig    |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c | 243 +++++++++++----------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |   3 +-
 3 files changed, 80 insertions(+), 167 deletions(-)

diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig
index 118e8a426b1a..345a5570a3da 100644
--- a/drivers/gpu/drm/vc4/Kconfig
+++ b/drivers/gpu/drm/vc4/Kconfig
@@ -12,6 +12,7 @@ config DRM_VC4
 	select SND_PCM
 	select SND_PCM_ELD
 	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_HDMI_CODEC
 	select DRM_MIPI_DSI
 	help
 	  Choose this option if you have a system that has a Broadcom
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b7e3bd89e237..0ecfcf54b70a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -45,6 +45,7 @@
 #include <linux/rational.h>
 #include <linux/reset.h>
 #include <sound/dmaengine_pcm.h>
+#include <sound/hdmi-codec.h>
 #include <sound/pcm_drm_eld.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -455,15 +456,10 @@ static void vc4_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
 static void vc4_hdmi_set_audio_infoframe(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	struct hdmi_audio_infoframe *audio = &vc4_hdmi->audio.infoframe;
 	union hdmi_infoframe frame;
 
-	hdmi_audio_infoframe_init(&frame.audio);
-
-	frame.audio.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	frame.audio.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-	frame.audio.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	frame.audio.channels = vc4_hdmi->audio.channels;
-
+	memcpy(&frame.audio, audio, sizeof(*audio));
 	vc4_hdmi_write_infoframe(encoder, &frame);
 }
 
@@ -1119,18 +1115,10 @@ static inline struct vc4_hdmi *dai_to_hdmi(struct snd_soc_dai *dai)
 	return snd_soc_card_get_drvdata(card);
 }
 
-static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
-				  struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_startup(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_connector *connector = &vc4_hdmi->connector;
-	int ret;
-
-	if (vc4_hdmi->audio.substream && vc4_hdmi->audio.substream != substream)
-		return -EINVAL;
-
-	vc4_hdmi->audio.substream = substream;
 
 	/*
 	 * If the HDMI encoder hasn't probed, or the encoder is
@@ -1140,15 +1128,18 @@ static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
 				VC4_HDMI_RAM_PACKET_ENABLE))
 		return -ENODEV;
 
-	ret = snd_pcm_hw_constraint_eld(substream->runtime, connector->eld);
-	if (ret)
-		return ret;
+	vc4_hdmi->audio.streaming = true;
 
-	return 0;
-}
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_RESET |
+		   VC4_HD_MAI_CTL_FLUSH |
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
+
+	if (vc4_hdmi->variant->phy_rng_enable)
+		vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
 
-static int vc4_hdmi_audio_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
 	return 0;
 }
 
@@ -1168,17 +1159,20 @@ static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
 	HDMI_WRITE(HDMI_MAI_CTL, VC4_HD_MAI_CTL_FLUSH);
 }
 
-static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
-				    struct snd_soc_dai *dai)
+static void vc4_hdmi_audio_shutdown(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 
-	if (substream != vc4_hdmi->audio.substream)
-		return;
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
 
+	if (vc4_hdmi->variant->phy_rng_disable)
+		vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
+
+	vc4_hdmi->audio.streaming = false;
 	vc4_hdmi_audio_reset(vc4_hdmi);
-
-	vc4_hdmi->audio.substream = NULL;
 }
 
 static int sample_rate_to_mai_fmt(int samplerate)
@@ -1220,39 +1214,38 @@ static int sample_rate_to_mai_fmt(int samplerate)
 }
 
 /* HDMI audio codec callbacks */
-static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
-				    struct snd_pcm_hw_params *params,
-				    struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
+				  struct hdmi_codec_daifmt *daifmt,
+				  struct hdmi_codec_params *params)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
-	if (substream != vc4_hdmi->audio.substream)
-		return -EINVAL;
-
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params_rate(params), params_width(params),
-		params_channels(params));
+		params->sample_rate, params->sample_width,
+		params->channels);
 
-	vc4_hdmi->audio.channels = params_channels(params);
-	vc4_hdmi->audio.samplerate = params_rate(params);
+	vc4_hdmi->audio.channels = params->channels;
+	vc4_hdmi->audio.samplerate = params->sample_rate;
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_HD_MAI_CTL_RESET |
-		   VC4_HD_MAI_CTL_FLUSH |
-		   VC4_HD_MAI_CTL_DLATE |
-		   VC4_HD_MAI_CTL_ERRORE |
-		   VC4_HD_MAI_CTL_ERRORF);
+		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_HD_MAI_CTL_WHOLSMP |
+		   VC4_HD_MAI_CTL_CHALIGN |
+		   VC4_HD_MAI_CTL_ENABLE);
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
 	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
-	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
+	    params->channels == 8)
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
+	else
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
 	HDMI_WRITE(HDMI_MAI_FMT,
 		   VC4_SET_FIELD(mai_sample_rate,
 				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
@@ -1286,94 +1279,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
 	vc4_hdmi_set_n_cts(vc4_hdmi);
 
+	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
 
 	return 0;
 }
 
-static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
-				  struct snd_soc_dai *dai)
-{
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		vc4_hdmi->audio.streaming = true;
-
-		if (vc4_hdmi->variant->phy_rng_enable)
-			vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
-
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
-					 VC4_HD_MAI_CTL_CHNUM) |
-					 VC4_HD_MAI_CTL_WHOLSMP |
-					 VC4_HD_MAI_CTL_CHALIGN |
-					 VC4_HD_MAI_CTL_ENABLE);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_HD_MAI_CTL_DLATE |
-			   VC4_HD_MAI_CTL_ERRORE |
-			   VC4_HD_MAI_CTL_ERRORF);
-
-		if (vc4_hdmi->variant->phy_rng_disable)
-			vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
-
-		vc4_hdmi->audio.streaming = false;
-
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static inline struct vc4_hdmi *
-snd_component_to_hdmi(struct snd_soc_component *component)
-{
-	struct snd_soc_card *card = snd_soc_component_get_drvdata(component);
-
-	return snd_soc_card_get_drvdata(card);
-}
-
-static int vc4_hdmi_audio_eld_ctl_info(struct snd_kcontrol *kcontrol,
-				       struct snd_ctl_elem_info *uinfo)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
-	uinfo->count = sizeof(connector->eld);
-
-	return 0;
-}
-
-static int vc4_hdmi_audio_eld_ctl_get(struct snd_kcontrol *kcontrol,
-				      struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	memcpy(ucontrol->value.bytes.data, connector->eld,
-	       sizeof(connector->eld));
-
-	return 0;
-}
-
-static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = {
-	{
-		.access = SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
-		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = "ELD",
-		.info = vc4_hdmi_audio_eld_ctl_info,
-		.get = vc4_hdmi_audio_eld_ctl_get,
-	},
-};
-
 static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("TX"),
 };
@@ -1384,8 +1295,6 @@ static const struct snd_soc_dapm_route vc4_hdmi_audio_routes[] = {
 
 static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.name			= "vc4-hdmi-codec-dai-component",
-	.controls		= vc4_hdmi_audio_controls,
-	.num_controls		= ARRAY_SIZE(vc4_hdmi_audio_controls),
 	.dapm_widgets		= vc4_hdmi_audio_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(vc4_hdmi_audio_widgets),
 	.dapm_routes		= vc4_hdmi_audio_routes,
@@ -1396,28 +1305,6 @@ static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.non_legacy_dai_naming	= 1,
 };
 
-static const struct snd_soc_dai_ops vc4_hdmi_audio_dai_ops = {
-	.startup = vc4_hdmi_audio_startup,
-	.shutdown = vc4_hdmi_audio_shutdown,
-	.hw_params = vc4_hdmi_audio_hw_params,
-	.set_fmt = vc4_hdmi_audio_set_fmt,
-	.trigger = vc4_hdmi_audio_trigger,
-};
-
-static struct snd_soc_dai_driver vc4_hdmi_audio_codec_dai_drv = {
-	.name = "vc4-hdmi-hifi",
-	.playback = {
-		.stream_name = "Playback",
-		.channels_min = 2,
-		.channels_max = 8,
-		.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
-			 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |
-			 SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |
-			 SNDRV_PCM_RATE_192000,
-		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
-	},
-};
-
 static const struct snd_soc_component_driver vc4_hdmi_audio_cpu_dai_comp = {
 	.name = "vc4-hdmi-cpu-dai-component",
 };
@@ -1444,7 +1331,6 @@ static struct snd_soc_dai_driver vc4_hdmi_audio_cpu_dai_drv = {
 			 SNDRV_PCM_RATE_192000,
 		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
 	},
-	.ops = &vc4_hdmi_audio_dai_ops,
 };
 
 static const struct snd_dmaengine_pcm_config pcm_conf = {
@@ -1452,6 +1338,31 @@ static const struct snd_dmaengine_pcm_config pcm_conf = {
 	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
 };
 
+
+static int vc4_hdmi_audio_get_eld(struct device *dev, void *data,
+				  uint8_t *buf, size_t len)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+	struct drm_connector *connector = &vc4_hdmi->connector;
+
+	memcpy(buf, connector->eld, min(sizeof(connector->eld), len));
+
+	return 0;
+}
+
+static const struct hdmi_codec_ops vc4_hdmi_codec_ops = {
+	.get_eld = vc4_hdmi_audio_get_eld,
+	.prepare = vc4_hdmi_audio_prepare,
+	.audio_shutdown = vc4_hdmi_audio_shutdown,
+	.audio_startup = vc4_hdmi_audio_startup,
+};
+
+struct hdmi_codec_pdata vc4_hdmi_codec_pdata = {
+	.ops = &vc4_hdmi_codec_ops,
+	.max_i2s_channels = 8,
+	.i2s = 1,
+};
+
 static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 {
 	const struct vc4_hdmi_register *mai_data =
@@ -1459,6 +1370,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 	struct snd_soc_dai_link *dai_link = &vc4_hdmi->audio.link;
 	struct snd_soc_card *card = &vc4_hdmi->audio.card;
 	struct device *dev = &vc4_hdmi->pdev->dev;
+	struct platform_device *codec_pdev;
 	const __be32 *addr;
 	int index;
 	int ret;
@@ -1505,12 +1417,13 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 		return ret;
 	}
 
-	/* register component and codec dai */
-	ret = devm_snd_soc_register_component(dev, &vc4_hdmi_audio_component_drv,
-				     &vc4_hdmi_audio_codec_dai_drv, 1);
-	if (ret) {
-		dev_err(dev, "Could not register component: %d\n", ret);
-		return ret;
+	codec_pdev = platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
+						   PLATFORM_DEVID_AUTO,
+						   &vc4_hdmi_codec_pdata,
+						   sizeof(vc4_hdmi_codec_pdata));
+	if (IS_ERR(codec_pdev)) {
+		dev_err(dev, "Couldn't register the HDMI codec: %ld\n", PTR_ERR(codec_pdev));
+		return PTR_ERR(codec_pdev);
 	}
 
 	dai_link->cpus		= &vc4_hdmi->audio.cpu;
@@ -1523,9 +1436,9 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 
 	dai_link->name = "MAI";
 	dai_link->stream_name = "MAI PCM";
-	dai_link->codecs->dai_name = vc4_hdmi_audio_codec_dai_drv.name;
+	dai_link->codecs->dai_name = "i2s-hifi";
 	dai_link->cpus->dai_name = dev_name(dev);
-	dai_link->codecs->name = dev_name(dev);
+	dai_link->codecs->name = dev_name(&codec_pdev->dev);
 	dai_link->platforms->name = dev_name(dev);
 
 	card->dai_link = dai_link;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 060bcaefbeb5..055aa64a47a2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -114,8 +114,7 @@ struct vc4_hdmi_audio {
 	int samplerate;
 	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
-	struct snd_pcm_substream *substream;
-
+	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
 };
 
-- 
2.31.1

[PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

The hdmi-codec brings a lot of advanced features, including the HDMI
channel mapping. Let's use it in our driver instead of our own codec.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/Kconfig    |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c | 243 +++++++++++----------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |   3 +-
 3 files changed, 80 insertions(+), 167 deletions(-)

diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig
index 118e8a426b1a..345a5570a3da 100644
--- a/drivers/gpu/drm/vc4/Kconfig
+++ b/drivers/gpu/drm/vc4/Kconfig
@@ -12,6 +12,7 @@ config DRM_VC4
 	select SND_PCM
 	select SND_PCM_ELD
 	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_HDMI_CODEC
 	select DRM_MIPI_DSI
 	help
 	  Choose this option if you have a system that has a Broadcom
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b7e3bd89e237..0ecfcf54b70a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -45,6 +45,7 @@
 #include <linux/rational.h>
 #include <linux/reset.h>
 #include <sound/dmaengine_pcm.h>
+#include <sound/hdmi-codec.h>
 #include <sound/pcm_drm_eld.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -455,15 +456,10 @@ static void vc4_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
 static void vc4_hdmi_set_audio_infoframe(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	struct hdmi_audio_infoframe *audio = &vc4_hdmi->audio.infoframe;
 	union hdmi_infoframe frame;
 
-	hdmi_audio_infoframe_init(&frame.audio);
-
-	frame.audio.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	frame.audio.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-	frame.audio.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	frame.audio.channels = vc4_hdmi->audio.channels;
-
+	memcpy(&frame.audio, audio, sizeof(*audio));
 	vc4_hdmi_write_infoframe(encoder, &frame);
 }
 
@@ -1119,18 +1115,10 @@ static inline struct vc4_hdmi *dai_to_hdmi(struct snd_soc_dai *dai)
 	return snd_soc_card_get_drvdata(card);
 }
 
-static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
-				  struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_startup(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_connector *connector = &vc4_hdmi->connector;
-	int ret;
-
-	if (vc4_hdmi->audio.substream && vc4_hdmi->audio.substream != substream)
-		return -EINVAL;
-
-	vc4_hdmi->audio.substream = substream;
 
 	/*
 	 * If the HDMI encoder hasn't probed, or the encoder is
@@ -1140,15 +1128,18 @@ static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
 				VC4_HDMI_RAM_PACKET_ENABLE))
 		return -ENODEV;
 
-	ret = snd_pcm_hw_constraint_eld(substream->runtime, connector->eld);
-	if (ret)
-		return ret;
+	vc4_hdmi->audio.streaming = true;
 
-	return 0;
-}
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_RESET |
+		   VC4_HD_MAI_CTL_FLUSH |
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
+
+	if (vc4_hdmi->variant->phy_rng_enable)
+		vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
 
-static int vc4_hdmi_audio_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
 	return 0;
 }
 
@@ -1168,17 +1159,20 @@ static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
 	HDMI_WRITE(HDMI_MAI_CTL, VC4_HD_MAI_CTL_FLUSH);
 }
 
-static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
-				    struct snd_soc_dai *dai)
+static void vc4_hdmi_audio_shutdown(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 
-	if (substream != vc4_hdmi->audio.substream)
-		return;
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
 
+	if (vc4_hdmi->variant->phy_rng_disable)
+		vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
+
+	vc4_hdmi->audio.streaming = false;
 	vc4_hdmi_audio_reset(vc4_hdmi);
-
-	vc4_hdmi->audio.substream = NULL;
 }
 
 static int sample_rate_to_mai_fmt(int samplerate)
@@ -1220,39 +1214,38 @@ static int sample_rate_to_mai_fmt(int samplerate)
 }
 
 /* HDMI audio codec callbacks */
-static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
-				    struct snd_pcm_hw_params *params,
-				    struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
+				  struct hdmi_codec_daifmt *daifmt,
+				  struct hdmi_codec_params *params)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
-	if (substream != vc4_hdmi->audio.substream)
-		return -EINVAL;
-
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params_rate(params), params_width(params),
-		params_channels(params));
+		params->sample_rate, params->sample_width,
+		params->channels);
 
-	vc4_hdmi->audio.channels = params_channels(params);
-	vc4_hdmi->audio.samplerate = params_rate(params);
+	vc4_hdmi->audio.channels = params->channels;
+	vc4_hdmi->audio.samplerate = params->sample_rate;
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_HD_MAI_CTL_RESET |
-		   VC4_HD_MAI_CTL_FLUSH |
-		   VC4_HD_MAI_CTL_DLATE |
-		   VC4_HD_MAI_CTL_ERRORE |
-		   VC4_HD_MAI_CTL_ERRORF);
+		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_HD_MAI_CTL_WHOLSMP |
+		   VC4_HD_MAI_CTL_CHALIGN |
+		   VC4_HD_MAI_CTL_ENABLE);
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
 	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
-	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
+	    params->channels == 8)
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
+	else
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
 	HDMI_WRITE(HDMI_MAI_FMT,
 		   VC4_SET_FIELD(mai_sample_rate,
 				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
@@ -1286,94 +1279,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
 	vc4_hdmi_set_n_cts(vc4_hdmi);
 
+	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
 
 	return 0;
 }
 
-static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
-				  struct snd_soc_dai *dai)
-{
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		vc4_hdmi->audio.streaming = true;
-
-		if (vc4_hdmi->variant->phy_rng_enable)
-			vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
-
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
-					 VC4_HD_MAI_CTL_CHNUM) |
-					 VC4_HD_MAI_CTL_WHOLSMP |
-					 VC4_HD_MAI_CTL_CHALIGN |
-					 VC4_HD_MAI_CTL_ENABLE);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_HD_MAI_CTL_DLATE |
-			   VC4_HD_MAI_CTL_ERRORE |
-			   VC4_HD_MAI_CTL_ERRORF);
-
-		if (vc4_hdmi->variant->phy_rng_disable)
-			vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
-
-		vc4_hdmi->audio.streaming = false;
-
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static inline struct vc4_hdmi *
-snd_component_to_hdmi(struct snd_soc_component *component)
-{
-	struct snd_soc_card *card = snd_soc_component_get_drvdata(component);
-
-	return snd_soc_card_get_drvdata(card);
-}
-
-static int vc4_hdmi_audio_eld_ctl_info(struct snd_kcontrol *kcontrol,
-				       struct snd_ctl_elem_info *uinfo)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
-	uinfo->count = sizeof(connector->eld);
-
-	return 0;
-}
-
-static int vc4_hdmi_audio_eld_ctl_get(struct snd_kcontrol *kcontrol,
-				      struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	memcpy(ucontrol->value.bytes.data, connector->eld,
-	       sizeof(connector->eld));
-
-	return 0;
-}
-
-static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = {
-	{
-		.access = SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
-		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = "ELD",
-		.info = vc4_hdmi_audio_eld_ctl_info,
-		.get = vc4_hdmi_audio_eld_ctl_get,
-	},
-};
-
 static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("TX"),
 };
@@ -1384,8 +1295,6 @@ static const struct snd_soc_dapm_route vc4_hdmi_audio_routes[] = {
 
 static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.name			= "vc4-hdmi-codec-dai-component",
-	.controls		= vc4_hdmi_audio_controls,
-	.num_controls		= ARRAY_SIZE(vc4_hdmi_audio_controls),
 	.dapm_widgets		= vc4_hdmi_audio_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(vc4_hdmi_audio_widgets),
 	.dapm_routes		= vc4_hdmi_audio_routes,
@@ -1396,28 +1305,6 @@ static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.non_legacy_dai_naming	= 1,
 };
 
-static const struct snd_soc_dai_ops vc4_hdmi_audio_dai_ops = {
-	.startup = vc4_hdmi_audio_startup,
-	.shutdown = vc4_hdmi_audio_shutdown,
-	.hw_params = vc4_hdmi_audio_hw_params,
-	.set_fmt = vc4_hdmi_audio_set_fmt,
-	.trigger = vc4_hdmi_audio_trigger,
-};
-
-static struct snd_soc_dai_driver vc4_hdmi_audio_codec_dai_drv = {
-	.name = "vc4-hdmi-hifi",
-	.playback = {
-		.stream_name = "Playback",
-		.channels_min = 2,
-		.channels_max = 8,
-		.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
-			 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |
-			 SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |
-			 SNDRV_PCM_RATE_192000,
-		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
-	},
-};
-
 static const struct snd_soc_component_driver vc4_hdmi_audio_cpu_dai_comp = {
 	.name = "vc4-hdmi-cpu-dai-component",
 };
@@ -1444,7 +1331,6 @@ static struct snd_soc_dai_driver vc4_hdmi_audio_cpu_dai_drv = {
 			 SNDRV_PCM_RATE_192000,
 		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
 	},
-	.ops = &vc4_hdmi_audio_dai_ops,
 };
 
 static const struct snd_dmaengine_pcm_config pcm_conf = {
@@ -1452,6 +1338,31 @@ static const struct snd_dmaengine_pcm_config pcm_conf = {
 	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
 };
 
+
+static int vc4_hdmi_audio_get_eld(struct device *dev, void *data,
+				  uint8_t *buf, size_t len)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+	struct drm_connector *connector = &vc4_hdmi->connector;
+
+	memcpy(buf, connector->eld, min(sizeof(connector->eld), len));
+
+	return 0;
+}
+
+static const struct hdmi_codec_ops vc4_hdmi_codec_ops = {
+	.get_eld = vc4_hdmi_audio_get_eld,
+	.prepare = vc4_hdmi_audio_prepare,
+	.audio_shutdown = vc4_hdmi_audio_shutdown,
+	.audio_startup = vc4_hdmi_audio_startup,
+};
+
+struct hdmi_codec_pdata vc4_hdmi_codec_pdata = {
+	.ops = &vc4_hdmi_codec_ops,
+	.max_i2s_channels = 8,
+	.i2s = 1,
+};
+
 static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 {
 	const struct vc4_hdmi_register *mai_data =
@@ -1459,6 +1370,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 	struct snd_soc_dai_link *dai_link = &vc4_hdmi->audio.link;
 	struct snd_soc_card *card = &vc4_hdmi->audio.card;
 	struct device *dev = &vc4_hdmi->pdev->dev;
+	struct platform_device *codec_pdev;
 	const __be32 *addr;
 	int index;
 	int ret;
@@ -1505,12 +1417,13 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 		return ret;
 	}
 
-	/* register component and codec dai */
-	ret = devm_snd_soc_register_component(dev, &vc4_hdmi_audio_component_drv,
-				     &vc4_hdmi_audio_codec_dai_drv, 1);
-	if (ret) {
-		dev_err(dev, "Could not register component: %d\n", ret);
-		return ret;
+	codec_pdev = platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
+						   PLATFORM_DEVID_AUTO,
+						   &vc4_hdmi_codec_pdata,
+						   sizeof(vc4_hdmi_codec_pdata));
+	if (IS_ERR(codec_pdev)) {
+		dev_err(dev, "Couldn't register the HDMI codec: %ld\n", PTR_ERR(codec_pdev));
+		return PTR_ERR(codec_pdev);
 	}
 
 	dai_link->cpus		= &vc4_hdmi->audio.cpu;
@@ -1523,9 +1436,9 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 
 	dai_link->name = "MAI";
 	dai_link->stream_name = "MAI PCM";
-	dai_link->codecs->dai_name = vc4_hdmi_audio_codec_dai_drv.name;
+	dai_link->codecs->dai_name = "i2s-hifi";
 	dai_link->cpus->dai_name = dev_name(dev);
-	dai_link->codecs->name = dev_name(dev);
+	dai_link->codecs->name = dev_name(&codec_pdev->dev);
 	dai_link->platforms->name = dev_name(dev);
 
 	card->dai_link = dai_link;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 060bcaefbeb5..055aa64a47a2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -114,8 +114,7 @@ struct vc4_hdmi_audio {
 	int samplerate;
 	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
-	struct snd_pcm_substream *substream;
-
+	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
 };
 
-- 
2.31.1

[PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

The hdmi-codec brings a lot of advanced features, including the HDMI
channel mapping. Let's use it in our driver instead of our own codec.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/Kconfig    |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c | 243 +++++++++++----------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |   3 +-
 3 files changed, 80 insertions(+), 167 deletions(-)

diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig
index 118e8a426b1a..345a5570a3da 100644
--- a/drivers/gpu/drm/vc4/Kconfig
+++ b/drivers/gpu/drm/vc4/Kconfig
@@ -12,6 +12,7 @@ config DRM_VC4
 	select SND_PCM
 	select SND_PCM_ELD
 	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_HDMI_CODEC
 	select DRM_MIPI_DSI
 	help
 	  Choose this option if you have a system that has a Broadcom
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b7e3bd89e237..0ecfcf54b70a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -45,6 +45,7 @@
 #include <linux/rational.h>
 #include <linux/reset.h>
 #include <sound/dmaengine_pcm.h>
+#include <sound/hdmi-codec.h>
 #include <sound/pcm_drm_eld.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -455,15 +456,10 @@ static void vc4_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
 static void vc4_hdmi_set_audio_infoframe(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	struct hdmi_audio_infoframe *audio = &vc4_hdmi->audio.infoframe;
 	union hdmi_infoframe frame;
 
-	hdmi_audio_infoframe_init(&frame.audio);
-
-	frame.audio.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	frame.audio.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-	frame.audio.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	frame.audio.channels = vc4_hdmi->audio.channels;
-
+	memcpy(&frame.audio, audio, sizeof(*audio));
 	vc4_hdmi_write_infoframe(encoder, &frame);
 }
 
@@ -1119,18 +1115,10 @@ static inline struct vc4_hdmi *dai_to_hdmi(struct snd_soc_dai *dai)
 	return snd_soc_card_get_drvdata(card);
 }
 
-static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
-				  struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_startup(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_connector *connector = &vc4_hdmi->connector;
-	int ret;
-
-	if (vc4_hdmi->audio.substream && vc4_hdmi->audio.substream != substream)
-		return -EINVAL;
-
-	vc4_hdmi->audio.substream = substream;
 
 	/*
 	 * If the HDMI encoder hasn't probed, or the encoder is
@@ -1140,15 +1128,18 @@ static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
 				VC4_HDMI_RAM_PACKET_ENABLE))
 		return -ENODEV;
 
-	ret = snd_pcm_hw_constraint_eld(substream->runtime, connector->eld);
-	if (ret)
-		return ret;
+	vc4_hdmi->audio.streaming = true;
 
-	return 0;
-}
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_RESET |
+		   VC4_HD_MAI_CTL_FLUSH |
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
+
+	if (vc4_hdmi->variant->phy_rng_enable)
+		vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
 
-static int vc4_hdmi_audio_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
 	return 0;
 }
 
@@ -1168,17 +1159,20 @@ static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
 	HDMI_WRITE(HDMI_MAI_CTL, VC4_HD_MAI_CTL_FLUSH);
 }
 
-static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
-				    struct snd_soc_dai *dai)
+static void vc4_hdmi_audio_shutdown(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 
-	if (substream != vc4_hdmi->audio.substream)
-		return;
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
 
+	if (vc4_hdmi->variant->phy_rng_disable)
+		vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
+
+	vc4_hdmi->audio.streaming = false;
 	vc4_hdmi_audio_reset(vc4_hdmi);
-
-	vc4_hdmi->audio.substream = NULL;
 }
 
 static int sample_rate_to_mai_fmt(int samplerate)
@@ -1220,39 +1214,38 @@ static int sample_rate_to_mai_fmt(int samplerate)
 }
 
 /* HDMI audio codec callbacks */
-static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
-				    struct snd_pcm_hw_params *params,
-				    struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
+				  struct hdmi_codec_daifmt *daifmt,
+				  struct hdmi_codec_params *params)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
-	if (substream != vc4_hdmi->audio.substream)
-		return -EINVAL;
-
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params_rate(params), params_width(params),
-		params_channels(params));
+		params->sample_rate, params->sample_width,
+		params->channels);
 
-	vc4_hdmi->audio.channels = params_channels(params);
-	vc4_hdmi->audio.samplerate = params_rate(params);
+	vc4_hdmi->audio.channels = params->channels;
+	vc4_hdmi->audio.samplerate = params->sample_rate;
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_HD_MAI_CTL_RESET |
-		   VC4_HD_MAI_CTL_FLUSH |
-		   VC4_HD_MAI_CTL_DLATE |
-		   VC4_HD_MAI_CTL_ERRORE |
-		   VC4_HD_MAI_CTL_ERRORF);
+		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_HD_MAI_CTL_WHOLSMP |
+		   VC4_HD_MAI_CTL_CHALIGN |
+		   VC4_HD_MAI_CTL_ENABLE);
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
 	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
-	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
+	    params->channels == 8)
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
+	else
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
 	HDMI_WRITE(HDMI_MAI_FMT,
 		   VC4_SET_FIELD(mai_sample_rate,
 				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
@@ -1286,94 +1279,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
 	vc4_hdmi_set_n_cts(vc4_hdmi);
 
+	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
 
 	return 0;
 }
 
-static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
-				  struct snd_soc_dai *dai)
-{
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		vc4_hdmi->audio.streaming = true;
-
-		if (vc4_hdmi->variant->phy_rng_enable)
-			vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
-
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
-					 VC4_HD_MAI_CTL_CHNUM) |
-					 VC4_HD_MAI_CTL_WHOLSMP |
-					 VC4_HD_MAI_CTL_CHALIGN |
-					 VC4_HD_MAI_CTL_ENABLE);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_HD_MAI_CTL_DLATE |
-			   VC4_HD_MAI_CTL_ERRORE |
-			   VC4_HD_MAI_CTL_ERRORF);
-
-		if (vc4_hdmi->variant->phy_rng_disable)
-			vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
-
-		vc4_hdmi->audio.streaming = false;
-
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static inline struct vc4_hdmi *
-snd_component_to_hdmi(struct snd_soc_component *component)
-{
-	struct snd_soc_card *card = snd_soc_component_get_drvdata(component);
-
-	return snd_soc_card_get_drvdata(card);
-}
-
-static int vc4_hdmi_audio_eld_ctl_info(struct snd_kcontrol *kcontrol,
-				       struct snd_ctl_elem_info *uinfo)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
-	uinfo->count = sizeof(connector->eld);
-
-	return 0;
-}
-
-static int vc4_hdmi_audio_eld_ctl_get(struct snd_kcontrol *kcontrol,
-				      struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	memcpy(ucontrol->value.bytes.data, connector->eld,
-	       sizeof(connector->eld));
-
-	return 0;
-}
-
-static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = {
-	{
-		.access = SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
-		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = "ELD",
-		.info = vc4_hdmi_audio_eld_ctl_info,
-		.get = vc4_hdmi_audio_eld_ctl_get,
-	},
-};
-
 static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("TX"),
 };
@@ -1384,8 +1295,6 @@ static const struct snd_soc_dapm_route vc4_hdmi_audio_routes[] = {
 
 static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.name			= "vc4-hdmi-codec-dai-component",
-	.controls		= vc4_hdmi_audio_controls,
-	.num_controls		= ARRAY_SIZE(vc4_hdmi_audio_controls),
 	.dapm_widgets		= vc4_hdmi_audio_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(vc4_hdmi_audio_widgets),
 	.dapm_routes		= vc4_hdmi_audio_routes,
@@ -1396,28 +1305,6 @@ static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.non_legacy_dai_naming	= 1,
 };
 
-static const struct snd_soc_dai_ops vc4_hdmi_audio_dai_ops = {
-	.startup = vc4_hdmi_audio_startup,
-	.shutdown = vc4_hdmi_audio_shutdown,
-	.hw_params = vc4_hdmi_audio_hw_params,
-	.set_fmt = vc4_hdmi_audio_set_fmt,
-	.trigger = vc4_hdmi_audio_trigger,
-};
-
-static struct snd_soc_dai_driver vc4_hdmi_audio_codec_dai_drv = {
-	.name = "vc4-hdmi-hifi",
-	.playback = {
-		.stream_name = "Playback",
-		.channels_min = 2,
-		.channels_max = 8,
-		.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
-			 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |
-			 SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |
-			 SNDRV_PCM_RATE_192000,
-		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
-	},
-};
-
 static const struct snd_soc_component_driver vc4_hdmi_audio_cpu_dai_comp = {
 	.name = "vc4-hdmi-cpu-dai-component",
 };
@@ -1444,7 +1331,6 @@ static struct snd_soc_dai_driver vc4_hdmi_audio_cpu_dai_drv = {
 			 SNDRV_PCM_RATE_192000,
 		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
 	},
-	.ops = &vc4_hdmi_audio_dai_ops,
 };
 
 static const struct snd_dmaengine_pcm_config pcm_conf = {
@@ -1452,6 +1338,31 @@ static const struct snd_dmaengine_pcm_config pcm_conf = {
 	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
 };
 
+
+static int vc4_hdmi_audio_get_eld(struct device *dev, void *data,
+				  uint8_t *buf, size_t len)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+	struct drm_connector *connector = &vc4_hdmi->connector;
+
+	memcpy(buf, connector->eld, min(sizeof(connector->eld), len));
+
+	return 0;
+}
+
+static const struct hdmi_codec_ops vc4_hdmi_codec_ops = {
+	.get_eld = vc4_hdmi_audio_get_eld,
+	.prepare = vc4_hdmi_audio_prepare,
+	.audio_shutdown = vc4_hdmi_audio_shutdown,
+	.audio_startup = vc4_hdmi_audio_startup,
+};
+
+struct hdmi_codec_pdata vc4_hdmi_codec_pdata = {
+	.ops = &vc4_hdmi_codec_ops,
+	.max_i2s_channels = 8,
+	.i2s = 1,
+};
+
 static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 {
 	const struct vc4_hdmi_register *mai_data =
@@ -1459,6 +1370,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 	struct snd_soc_dai_link *dai_link = &vc4_hdmi->audio.link;
 	struct snd_soc_card *card = &vc4_hdmi->audio.card;
 	struct device *dev = &vc4_hdmi->pdev->dev;
+	struct platform_device *codec_pdev;
 	const __be32 *addr;
 	int index;
 	int ret;
@@ -1505,12 +1417,13 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 		return ret;
 	}
 
-	/* register component and codec dai */
-	ret = devm_snd_soc_register_component(dev, &vc4_hdmi_audio_component_drv,
-				     &vc4_hdmi_audio_codec_dai_drv, 1);
-	if (ret) {
-		dev_err(dev, "Could not register component: %d\n", ret);
-		return ret;
+	codec_pdev = platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
+						   PLATFORM_DEVID_AUTO,
+						   &vc4_hdmi_codec_pdata,
+						   sizeof(vc4_hdmi_codec_pdata));
+	if (IS_ERR(codec_pdev)) {
+		dev_err(dev, "Couldn't register the HDMI codec: %ld\n", PTR_ERR(codec_pdev));
+		return PTR_ERR(codec_pdev);
 	}
 
 	dai_link->cpus		= &vc4_hdmi->audio.cpu;
@@ -1523,9 +1436,9 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 
 	dai_link->name = "MAI";
 	dai_link->stream_name = "MAI PCM";
-	dai_link->codecs->dai_name = vc4_hdmi_audio_codec_dai_drv.name;
+	dai_link->codecs->dai_name = "i2s-hifi";
 	dai_link->cpus->dai_name = dev_name(dev);
-	dai_link->codecs->name = dev_name(dev);
+	dai_link->codecs->name = dev_name(&codec_pdev->dev);
 	dai_link->platforms->name = dev_name(dev);
 
 	card->dai_link = dai_link;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 060bcaefbeb5..055aa64a47a2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -114,8 +114,7 @@ struct vc4_hdmi_audio {
 	int samplerate;
 	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
-	struct snd_pcm_substream *substream;
-
+	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
 };
 
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

The hdmi-codec brings a lot of advanced features, including the HDMI
channel mapping. Let's use it in our driver instead of our own codec.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/Kconfig    |   1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c | 243 +++++++++++----------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |   3 +-
 3 files changed, 80 insertions(+), 167 deletions(-)

diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig
index 118e8a426b1a..345a5570a3da 100644
--- a/drivers/gpu/drm/vc4/Kconfig
+++ b/drivers/gpu/drm/vc4/Kconfig
@@ -12,6 +12,7 @@ config DRM_VC4
 	select SND_PCM
 	select SND_PCM_ELD
 	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_HDMI_CODEC
 	select DRM_MIPI_DSI
 	help
 	  Choose this option if you have a system that has a Broadcom
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b7e3bd89e237..0ecfcf54b70a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -45,6 +45,7 @@
 #include <linux/rational.h>
 #include <linux/reset.h>
 #include <sound/dmaengine_pcm.h>
+#include <sound/hdmi-codec.h>
 #include <sound/pcm_drm_eld.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -455,15 +456,10 @@ static void vc4_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
 static void vc4_hdmi_set_audio_infoframe(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	struct hdmi_audio_infoframe *audio = &vc4_hdmi->audio.infoframe;
 	union hdmi_infoframe frame;
 
-	hdmi_audio_infoframe_init(&frame.audio);
-
-	frame.audio.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
-	frame.audio.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
-	frame.audio.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
-	frame.audio.channels = vc4_hdmi->audio.channels;
-
+	memcpy(&frame.audio, audio, sizeof(*audio));
 	vc4_hdmi_write_infoframe(encoder, &frame);
 }
 
@@ -1119,18 +1115,10 @@ static inline struct vc4_hdmi *dai_to_hdmi(struct snd_soc_dai *dai)
 	return snd_soc_card_get_drvdata(card);
 }
 
-static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
-				  struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_startup(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct drm_connector *connector = &vc4_hdmi->connector;
-	int ret;
-
-	if (vc4_hdmi->audio.substream && vc4_hdmi->audio.substream != substream)
-		return -EINVAL;
-
-	vc4_hdmi->audio.substream = substream;
 
 	/*
 	 * If the HDMI encoder hasn't probed, or the encoder is
@@ -1140,15 +1128,18 @@ static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
 				VC4_HDMI_RAM_PACKET_ENABLE))
 		return -ENODEV;
 
-	ret = snd_pcm_hw_constraint_eld(substream->runtime, connector->eld);
-	if (ret)
-		return ret;
+	vc4_hdmi->audio.streaming = true;
 
-	return 0;
-}
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_RESET |
+		   VC4_HD_MAI_CTL_FLUSH |
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
+
+	if (vc4_hdmi->variant->phy_rng_enable)
+		vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
 
-static int vc4_hdmi_audio_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
 	return 0;
 }
 
@@ -1168,17 +1159,20 @@ static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
 	HDMI_WRITE(HDMI_MAI_CTL, VC4_HD_MAI_CTL_FLUSH);
 }
 
-static void vc4_hdmi_audio_shutdown(struct snd_pcm_substream *substream,
-				    struct snd_soc_dai *dai)
+static void vc4_hdmi_audio_shutdown(struct device *dev, void *data)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 
-	if (substream != vc4_hdmi->audio.substream)
-		return;
+	HDMI_WRITE(HDMI_MAI_CTL,
+		   VC4_HD_MAI_CTL_DLATE |
+		   VC4_HD_MAI_CTL_ERRORE |
+		   VC4_HD_MAI_CTL_ERRORF);
 
+	if (vc4_hdmi->variant->phy_rng_disable)
+		vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
+
+	vc4_hdmi->audio.streaming = false;
 	vc4_hdmi_audio_reset(vc4_hdmi);
-
-	vc4_hdmi->audio.substream = NULL;
 }
 
 static int sample_rate_to_mai_fmt(int samplerate)
@@ -1220,39 +1214,38 @@ static int sample_rate_to_mai_fmt(int samplerate)
 }
 
 /* HDMI audio codec callbacks */
-static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
-				    struct snd_pcm_hw_params *params,
-				    struct snd_soc_dai *dai)
+static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
+				  struct hdmi_codec_daifmt *daifmt,
+				  struct hdmi_codec_params *params)
 {
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
-	struct device *dev = &vc4_hdmi->pdev->dev;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
-	if (substream != vc4_hdmi->audio.substream)
-		return -EINVAL;
-
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params_rate(params), params_width(params),
-		params_channels(params));
+		params->sample_rate, params->sample_width,
+		params->channels);
 
-	vc4_hdmi->audio.channels = params_channels(params);
-	vc4_hdmi->audio.samplerate = params_rate(params);
+	vc4_hdmi->audio.channels = params->channels;
+	vc4_hdmi->audio.samplerate = params->sample_rate;
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_HD_MAI_CTL_RESET |
-		   VC4_HD_MAI_CTL_FLUSH |
-		   VC4_HD_MAI_CTL_DLATE |
-		   VC4_HD_MAI_CTL_ERRORE |
-		   VC4_HD_MAI_CTL_ERRORF);
+		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_HD_MAI_CTL_WHOLSMP |
+		   VC4_HD_MAI_CTL_CHALIGN |
+		   VC4_HD_MAI_CTL_ENABLE);
 
 	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
 
 	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
-	mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
+	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
+	    params->channels == 8)
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
+	else
+		mai_audio_format = VC4_HDMI_MAI_FORMAT_PCM;
 	HDMI_WRITE(HDMI_MAI_FMT,
 		   VC4_SET_FIELD(mai_sample_rate,
 				 VC4_HDMI_MAI_FORMAT_SAMPLE_RATE) |
@@ -1286,94 +1279,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
 	vc4_hdmi_set_n_cts(vc4_hdmi);
 
+	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
 
 	return 0;
 }
 
-static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
-				  struct snd_soc_dai *dai)
-{
-	struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		vc4_hdmi->audio.streaming = true;
-
-		if (vc4_hdmi->variant->phy_rng_enable)
-			vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
-
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_SET_FIELD(vc4_hdmi->audio.channels,
-					 VC4_HD_MAI_CTL_CHNUM) |
-					 VC4_HD_MAI_CTL_WHOLSMP |
-					 VC4_HD_MAI_CTL_CHALIGN |
-					 VC4_HD_MAI_CTL_ENABLE);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-		HDMI_WRITE(HDMI_MAI_CTL,
-			   VC4_HD_MAI_CTL_DLATE |
-			   VC4_HD_MAI_CTL_ERRORE |
-			   VC4_HD_MAI_CTL_ERRORF);
-
-		if (vc4_hdmi->variant->phy_rng_disable)
-			vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
-
-		vc4_hdmi->audio.streaming = false;
-
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static inline struct vc4_hdmi *
-snd_component_to_hdmi(struct snd_soc_component *component)
-{
-	struct snd_soc_card *card = snd_soc_component_get_drvdata(component);
-
-	return snd_soc_card_get_drvdata(card);
-}
-
-static int vc4_hdmi_audio_eld_ctl_info(struct snd_kcontrol *kcontrol,
-				       struct snd_ctl_elem_info *uinfo)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
-	uinfo->count = sizeof(connector->eld);
-
-	return 0;
-}
-
-static int vc4_hdmi_audio_eld_ctl_get(struct snd_kcontrol *kcontrol,
-				      struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
-	struct vc4_hdmi *vc4_hdmi = snd_component_to_hdmi(component);
-	struct drm_connector *connector = &vc4_hdmi->connector;
-
-	memcpy(ucontrol->value.bytes.data, connector->eld,
-	       sizeof(connector->eld));
-
-	return 0;
-}
-
-static const struct snd_kcontrol_new vc4_hdmi_audio_controls[] = {
-	{
-		.access = SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
-		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = "ELD",
-		.info = vc4_hdmi_audio_eld_ctl_info,
-		.get = vc4_hdmi_audio_eld_ctl_get,
-	},
-};
-
 static const struct snd_soc_dapm_widget vc4_hdmi_audio_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("TX"),
 };
@@ -1384,8 +1295,6 @@ static const struct snd_soc_dapm_route vc4_hdmi_audio_routes[] = {
 
 static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.name			= "vc4-hdmi-codec-dai-component",
-	.controls		= vc4_hdmi_audio_controls,
-	.num_controls		= ARRAY_SIZE(vc4_hdmi_audio_controls),
 	.dapm_widgets		= vc4_hdmi_audio_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(vc4_hdmi_audio_widgets),
 	.dapm_routes		= vc4_hdmi_audio_routes,
@@ -1396,28 +1305,6 @@ static const struct snd_soc_component_driver vc4_hdmi_audio_component_drv = {
 	.non_legacy_dai_naming	= 1,
 };
 
-static const struct snd_soc_dai_ops vc4_hdmi_audio_dai_ops = {
-	.startup = vc4_hdmi_audio_startup,
-	.shutdown = vc4_hdmi_audio_shutdown,
-	.hw_params = vc4_hdmi_audio_hw_params,
-	.set_fmt = vc4_hdmi_audio_set_fmt,
-	.trigger = vc4_hdmi_audio_trigger,
-};
-
-static struct snd_soc_dai_driver vc4_hdmi_audio_codec_dai_drv = {
-	.name = "vc4-hdmi-hifi",
-	.playback = {
-		.stream_name = "Playback",
-		.channels_min = 2,
-		.channels_max = 8,
-		.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
-			 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |
-			 SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |
-			 SNDRV_PCM_RATE_192000,
-		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
-	},
-};
-
 static const struct snd_soc_component_driver vc4_hdmi_audio_cpu_dai_comp = {
 	.name = "vc4-hdmi-cpu-dai-component",
 };
@@ -1444,7 +1331,6 @@ static struct snd_soc_dai_driver vc4_hdmi_audio_cpu_dai_drv = {
 			 SNDRV_PCM_RATE_192000,
 		.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
 	},
-	.ops = &vc4_hdmi_audio_dai_ops,
 };
 
 static const struct snd_dmaengine_pcm_config pcm_conf = {
@@ -1452,6 +1338,31 @@ static const struct snd_dmaengine_pcm_config pcm_conf = {
 	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
 };
 
+
+static int vc4_hdmi_audio_get_eld(struct device *dev, void *data,
+				  uint8_t *buf, size_t len)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+	struct drm_connector *connector = &vc4_hdmi->connector;
+
+	memcpy(buf, connector->eld, min(sizeof(connector->eld), len));
+
+	return 0;
+}
+
+static const struct hdmi_codec_ops vc4_hdmi_codec_ops = {
+	.get_eld = vc4_hdmi_audio_get_eld,
+	.prepare = vc4_hdmi_audio_prepare,
+	.audio_shutdown = vc4_hdmi_audio_shutdown,
+	.audio_startup = vc4_hdmi_audio_startup,
+};
+
+struct hdmi_codec_pdata vc4_hdmi_codec_pdata = {
+	.ops = &vc4_hdmi_codec_ops,
+	.max_i2s_channels = 8,
+	.i2s = 1,
+};
+
 static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 {
 	const struct vc4_hdmi_register *mai_data =
@@ -1459,6 +1370,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 	struct snd_soc_dai_link *dai_link = &vc4_hdmi->audio.link;
 	struct snd_soc_card *card = &vc4_hdmi->audio.card;
 	struct device *dev = &vc4_hdmi->pdev->dev;
+	struct platform_device *codec_pdev;
 	const __be32 *addr;
 	int index;
 	int ret;
@@ -1505,12 +1417,13 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 		return ret;
 	}
 
-	/* register component and codec dai */
-	ret = devm_snd_soc_register_component(dev, &vc4_hdmi_audio_component_drv,
-				     &vc4_hdmi_audio_codec_dai_drv, 1);
-	if (ret) {
-		dev_err(dev, "Could not register component: %d\n", ret);
-		return ret;
+	codec_pdev = platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
+						   PLATFORM_DEVID_AUTO,
+						   &vc4_hdmi_codec_pdata,
+						   sizeof(vc4_hdmi_codec_pdata));
+	if (IS_ERR(codec_pdev)) {
+		dev_err(dev, "Couldn't register the HDMI codec: %ld\n", PTR_ERR(codec_pdev));
+		return PTR_ERR(codec_pdev);
 	}
 
 	dai_link->cpus		= &vc4_hdmi->audio.cpu;
@@ -1523,9 +1436,9 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
 
 	dai_link->name = "MAI";
 	dai_link->stream_name = "MAI PCM";
-	dai_link->codecs->dai_name = vc4_hdmi_audio_codec_dai_drv.name;
+	dai_link->codecs->dai_name = "i2s-hifi";
 	dai_link->cpus->dai_name = dev_name(dev);
-	dai_link->codecs->name = dev_name(dev);
+	dai_link->codecs->name = dev_name(&codec_pdev->dev);
 	dai_link->platforms->name = dev_name(dev);
 
 	card->dai_link = dai_link;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 060bcaefbeb5..055aa64a47a2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -114,8 +114,7 @@ struct vc4_hdmi_audio {
 	int samplerate;
 	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
-	struct snd_pcm_substream *substream;
-
+	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
 };
 
-- 
2.31.1

[PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[Maxime Ripard]

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 26 ++++++++++++--------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  2 --
 2 files changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0ecfcf54b70a..c6dafeab4378 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1064,12 +1064,13 @@ static u32 vc5_hdmi_channel_map(struct vc4_hdmi *vc4_hdmi, u32 channel_mask)
 }
 
 /* HDMI audio codec callbacks */
-static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi,
+					 unsigned int samplerate)
 {
 	u32 hsm_clock = clk_get_rate(vc4_hdmi->audio_clock);
 	unsigned long n, m;
 
-	rational_best_approximation(hsm_clock, vc4_hdmi->audio.samplerate,
+	rational_best_approximation(hsm_clock, samplerate,
 				    VC4_HD_MAI_SMP_N_MASK >>
 				    VC4_HD_MAI_SMP_N_SHIFT,
 				    (VC4_HD_MAI_SMP_M_MASK >>
@@ -1081,12 +1082,11 @@ static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
 		   VC4_SET_FIELD(m - 1, VC4_HD_MAI_SMP_M));
 }
 
-static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi, unsigned int samplerate)
 {
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
 	struct drm_crtc *crtc = encoder->crtc;
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
-	u32 samplerate = vc4_hdmi->audio.samplerate;
 	u32 n, cts;
 	u64 tmp;
 
@@ -1220,27 +1220,25 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 {
 	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
+	unsigned int sample_rate = params->sample_rate;
+	unsigned int channels = params->channels;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params->sample_rate, params->sample_width,
-		params->channels);
-
-	vc4_hdmi->audio.channels = params->channels;
-	vc4_hdmi->audio.samplerate = params->sample_rate;
+		sample_rate, params->sample_width, channels);
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_SET_FIELD(channels, VC4_HD_MAI_CTL_CHNUM) |
 		   VC4_HD_MAI_CTL_WHOLSMP |
 		   VC4_HD_MAI_CTL_CHALIGN |
 		   VC4_HD_MAI_CTL_ENABLE);
 
-	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
+	vc4_hdmi_audio_set_mai_clock(vc4_hdmi, sample_rate);
 
-	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_sample_rate = sample_rate_to_mai_fmt(sample_rate);
 	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
 	    params->channels == 8)
 		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
@@ -1258,7 +1256,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_INACTIVE_CHANNELS |
 		VC4_SET_FIELD(0x8, VC4_HDMI_AUDIO_PACKET_B_FRAME_IDENTIFIER);
 
-	channel_mask = GENMASK(vc4_hdmi->audio.channels - 1, 0);
+	channel_mask = GENMASK(channels - 1, 0);
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
@@ -1277,7 +1275,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
 	HDMI_WRITE(HDMI_MAI_CHANNEL_MAP, channel_map);
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
-	vc4_hdmi_set_n_cts(vc4_hdmi);
+	vc4_hdmi_set_n_cts(vc4_hdmi, sample_rate);
 
 	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 055aa64a47a2..511673cda341 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -111,8 +111,6 @@ struct vc4_hdmi_audio {
 	struct snd_soc_dai_link_component cpu;
 	struct snd_soc_dai_link_component codec;
 	struct snd_soc_dai_link_component platform;
-	int samplerate;
-	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
 	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
-- 
2.31.1

[PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[Maxime Ripard]

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 26 ++++++++++++--------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  2 --
 2 files changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0ecfcf54b70a..c6dafeab4378 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1064,12 +1064,13 @@ static u32 vc5_hdmi_channel_map(struct vc4_hdmi *vc4_hdmi, u32 channel_mask)
 }
 
 /* HDMI audio codec callbacks */
-static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi,
+					 unsigned int samplerate)
 {
 	u32 hsm_clock = clk_get_rate(vc4_hdmi->audio_clock);
 	unsigned long n, m;
 
-	rational_best_approximation(hsm_clock, vc4_hdmi->audio.samplerate,
+	rational_best_approximation(hsm_clock, samplerate,
 				    VC4_HD_MAI_SMP_N_MASK >>
 				    VC4_HD_MAI_SMP_N_SHIFT,
 				    (VC4_HD_MAI_SMP_M_MASK >>
@@ -1081,12 +1082,11 @@ static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
 		   VC4_SET_FIELD(m - 1, VC4_HD_MAI_SMP_M));
 }
 
-static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi, unsigned int samplerate)
 {
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
 	struct drm_crtc *crtc = encoder->crtc;
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
-	u32 samplerate = vc4_hdmi->audio.samplerate;
 	u32 n, cts;
 	u64 tmp;
 
@@ -1220,27 +1220,25 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 {
 	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
+	unsigned int sample_rate = params->sample_rate;
+	unsigned int channels = params->channels;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params->sample_rate, params->sample_width,
-		params->channels);
-
-	vc4_hdmi->audio.channels = params->channels;
-	vc4_hdmi->audio.samplerate = params->sample_rate;
+		sample_rate, params->sample_width, channels);
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_SET_FIELD(channels, VC4_HD_MAI_CTL_CHNUM) |
 		   VC4_HD_MAI_CTL_WHOLSMP |
 		   VC4_HD_MAI_CTL_CHALIGN |
 		   VC4_HD_MAI_CTL_ENABLE);
 
-	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
+	vc4_hdmi_audio_set_mai_clock(vc4_hdmi, sample_rate);
 
-	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_sample_rate = sample_rate_to_mai_fmt(sample_rate);
 	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
 	    params->channels == 8)
 		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
@@ -1258,7 +1256,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_INACTIVE_CHANNELS |
 		VC4_SET_FIELD(0x8, VC4_HDMI_AUDIO_PACKET_B_FRAME_IDENTIFIER);
 
-	channel_mask = GENMASK(vc4_hdmi->audio.channels - 1, 0);
+	channel_mask = GENMASK(channels - 1, 0);
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
@@ -1277,7 +1275,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
 	HDMI_WRITE(HDMI_MAI_CHANNEL_MAP, channel_map);
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
-	vc4_hdmi_set_n_cts(vc4_hdmi);
+	vc4_hdmi_set_n_cts(vc4_hdmi, sample_rate);
 
 	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 055aa64a47a2..511673cda341 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -111,8 +111,6 @@ struct vc4_hdmi_audio {
 	struct snd_soc_dai_link_component cpu;
 	struct snd_soc_dai_link_component codec;
 	struct snd_soc_dai_link_component platform;
-	int samplerate;
-	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
 	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
-- 
2.31.1

[PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[Maxime Ripard]

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 26 ++++++++++++--------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  2 --
 2 files changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0ecfcf54b70a..c6dafeab4378 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1064,12 +1064,13 @@ static u32 vc5_hdmi_channel_map(struct vc4_hdmi *vc4_hdmi, u32 channel_mask)
 }
 
 /* HDMI audio codec callbacks */
-static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi,
+					 unsigned int samplerate)
 {
 	u32 hsm_clock = clk_get_rate(vc4_hdmi->audio_clock);
 	unsigned long n, m;
 
-	rational_best_approximation(hsm_clock, vc4_hdmi->audio.samplerate,
+	rational_best_approximation(hsm_clock, samplerate,
 				    VC4_HD_MAI_SMP_N_MASK >>
 				    VC4_HD_MAI_SMP_N_SHIFT,
 				    (VC4_HD_MAI_SMP_M_MASK >>
@@ -1081,12 +1082,11 @@ static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
 		   VC4_SET_FIELD(m - 1, VC4_HD_MAI_SMP_M));
 }
 
-static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi, unsigned int samplerate)
 {
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
 	struct drm_crtc *crtc = encoder->crtc;
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
-	u32 samplerate = vc4_hdmi->audio.samplerate;
 	u32 n, cts;
 	u64 tmp;
 
@@ -1220,27 +1220,25 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 {
 	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
+	unsigned int sample_rate = params->sample_rate;
+	unsigned int channels = params->channels;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params->sample_rate, params->sample_width,
-		params->channels);
-
-	vc4_hdmi->audio.channels = params->channels;
-	vc4_hdmi->audio.samplerate = params->sample_rate;
+		sample_rate, params->sample_width, channels);
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_SET_FIELD(channels, VC4_HD_MAI_CTL_CHNUM) |
 		   VC4_HD_MAI_CTL_WHOLSMP |
 		   VC4_HD_MAI_CTL_CHALIGN |
 		   VC4_HD_MAI_CTL_ENABLE);
 
-	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
+	vc4_hdmi_audio_set_mai_clock(vc4_hdmi, sample_rate);
 
-	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_sample_rate = sample_rate_to_mai_fmt(sample_rate);
 	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
 	    params->channels == 8)
 		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
@@ -1258,7 +1256,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_INACTIVE_CHANNELS |
 		VC4_SET_FIELD(0x8, VC4_HDMI_AUDIO_PACKET_B_FRAME_IDENTIFIER);
 
-	channel_mask = GENMASK(vc4_hdmi->audio.channels - 1, 0);
+	channel_mask = GENMASK(channels - 1, 0);
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
@@ -1277,7 +1275,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
 	HDMI_WRITE(HDMI_MAI_CHANNEL_MAP, channel_map);
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
-	vc4_hdmi_set_n_cts(vc4_hdmi);
+	vc4_hdmi_set_n_cts(vc4_hdmi, sample_rate);
 
 	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 055aa64a47a2..511673cda341 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -111,8 +111,6 @@ struct vc4_hdmi_audio {
 	struct snd_soc_dai_link_component cpu;
 	struct snd_soc_dai_link_component codec;
 	struct snd_soc_dai_link_component platform;
-	int samplerate;
-	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
 	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[Maxime Ripard]

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 26 ++++++++++++--------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  2 --
 2 files changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0ecfcf54b70a..c6dafeab4378 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1064,12 +1064,13 @@ static u32 vc5_hdmi_channel_map(struct vc4_hdmi *vc4_hdmi, u32 channel_mask)
 }
 
 /* HDMI audio codec callbacks */
-static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi,
+					 unsigned int samplerate)
 {
 	u32 hsm_clock = clk_get_rate(vc4_hdmi->audio_clock);
 	unsigned long n, m;
 
-	rational_best_approximation(hsm_clock, vc4_hdmi->audio.samplerate,
+	rational_best_approximation(hsm_clock, samplerate,
 				    VC4_HD_MAI_SMP_N_MASK >>
 				    VC4_HD_MAI_SMP_N_SHIFT,
 				    (VC4_HD_MAI_SMP_M_MASK >>
@@ -1081,12 +1082,11 @@ static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
 		   VC4_SET_FIELD(m - 1, VC4_HD_MAI_SMP_M));
 }
 
-static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi, unsigned int samplerate)
 {
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
 	struct drm_crtc *crtc = encoder->crtc;
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
-	u32 samplerate = vc4_hdmi->audio.samplerate;
 	u32 n, cts;
 	u64 tmp;
 
@@ -1220,27 +1220,25 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 {
 	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
+	unsigned int sample_rate = params->sample_rate;
+	unsigned int channels = params->channels;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params->sample_rate, params->sample_width,
-		params->channels);
-
-	vc4_hdmi->audio.channels = params->channels;
-	vc4_hdmi->audio.samplerate = params->sample_rate;
+		sample_rate, params->sample_width, channels);
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_SET_FIELD(channels, VC4_HD_MAI_CTL_CHNUM) |
 		   VC4_HD_MAI_CTL_WHOLSMP |
 		   VC4_HD_MAI_CTL_CHALIGN |
 		   VC4_HD_MAI_CTL_ENABLE);
 
-	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
+	vc4_hdmi_audio_set_mai_clock(vc4_hdmi, sample_rate);
 
-	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_sample_rate = sample_rate_to_mai_fmt(sample_rate);
 	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
 	    params->channels == 8)
 		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
@@ -1258,7 +1256,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_INACTIVE_CHANNELS |
 		VC4_SET_FIELD(0x8, VC4_HDMI_AUDIO_PACKET_B_FRAME_IDENTIFIER);
 
-	channel_mask = GENMASK(vc4_hdmi->audio.channels - 1, 0);
+	channel_mask = GENMASK(channels - 1, 0);
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
@@ -1277,7 +1275,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
 	HDMI_WRITE(HDMI_MAI_CHANNEL_MAP, channel_map);
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
-	vc4_hdmi_set_n_cts(vc4_hdmi);
+	vc4_hdmi_set_n_cts(vc4_hdmi, sample_rate);
 
 	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 055aa64a47a2..511673cda341 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -111,8 +111,6 @@ struct vc4_hdmi_audio {
 	struct snd_soc_dai_link_component cpu;
 	struct snd_soc_dai_link_component codec;
 	struct snd_soc_dai_link_component platform;
-	int samplerate;
-	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
 	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
-- 
2.31.1

[PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
panic and AXI priorities to avoid any DMA transfer error with HBR audio
(8 channel, 192Hz).

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec54d61..9d1dde973680 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
 			ddc = <&ddc0>;
-			dmas = <&dma 10>;
+			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
@@ -385,7 +385,7 @@ hdmi1: hdmi@7ef05700 {
 				     <9>, <10>, <11>;
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
-			dmas = <&dma 17>;
+			dmas = <&dma (17 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
-- 
2.31.1

[PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
panic and AXI priorities to avoid any DMA transfer error with HBR audio
(8 channel, 192Hz).

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec54d61..9d1dde973680 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
 			ddc = <&ddc0>;
-			dmas = <&dma 10>;
+			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
@@ -385,7 +385,7 @@ hdmi1: hdmi@7ef05700 {
 				     <9>, <10>, <11>;
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
-			dmas = <&dma 17>;
+			dmas = <&dma (17 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
-- 
2.31.1

[PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
panic and AXI priorities to avoid any DMA transfer error with HBR audio
(8 channel, 192Hz).

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec54d61..9d1dde973680 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
 			ddc = <&ddc0>;
-			dmas = <&dma 10>;
+			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
@@ -385,7 +385,7 @@ hdmi1: hdmi@7ef05700 {
 				     <9>, <10>, <11>;
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
-			dmas = <&dma 17>;
+			dmas = <&dma (17 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Maxime Ripard]

From: Dom Cobley <popcornmix@gmail.com>

Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
panic and AXI priorities to avoid any DMA transfer error with HBR audio
(8 channel, 192Hz).

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec54d61..9d1dde973680 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
 			ddc = <&ddc0>;
-			dmas = <&dma 10>;
+			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
@@ -385,7 +385,7 @@ hdmi1: hdmi@7ef05700 {
 				     <9>, <10>, <11>;
 			interrupt-names = "cec-tx", "cec-rx", "cec-low",
 					  "wakeup", "hpd-connected", "hpd-removed";
-			dmas = <&dma 17>;
+			dmas = <&dma (17 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
 			dma-names = "audio-rx";
 			status = "disabled";
 		};
-- 
2.31.1

Re: [PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Florian Fainelli]

On 5/25/2021 6:23 AM, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
> panic and AXI priorities to avoid any DMA transfer error with HBR audio
> (8 channel, 192Hz).
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
>  arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 720beec54d61..9d1dde973680 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
>  			interrupt-names = "cec-tx", "cec-rx", "cec-low",
>  					  "wakeup", "hpd-connected", "hpd-removed";
>  			ddc = <&ddc0>;
> -			dmas = <&dma 10>;
> +			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;

This uses DT as a configuration language rather than a description here,
but this is most certainly an established practice that the bcm283-dma.c
supports, with no validation of the various arguments.. great.

Is there at least an option to move the meaning of this bitfields into
include/dt-bindings/dma/bcm2835-dma.h or something like that?
-- 
Florian

Re: [PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Florian Fainelli]

On 5/25/2021 6:23 AM, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
> panic and AXI priorities to avoid any DMA transfer error with HBR audio
> (8 channel, 192Hz).
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
>  arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 720beec54d61..9d1dde973680 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
>  			interrupt-names = "cec-tx", "cec-rx", "cec-low",
>  					  "wakeup", "hpd-connected", "hpd-removed";
>  			ddc = <&ddc0>;
> -			dmas = <&dma 10>;
> +			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;

This uses DT as a configuration language rather than a description here,
but this is most certainly an established practice that the bcm283-dma.c
supports, with no validation of the various arguments.. great.

Is there at least an option to move the meaning of this bitfields into
include/dt-bindings/dma/bcm2835-dma.h or something like that?
-- 
Florian

Re: [PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Florian Fainelli]

On 5/25/2021 6:23 AM, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
> panic and AXI priorities to avoid any DMA transfer error with HBR audio
> (8 channel, 192Hz).
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
>  arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 720beec54d61..9d1dde973680 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
>  			interrupt-names = "cec-tx", "cec-rx", "cec-low",
>  					  "wakeup", "hpd-connected", "hpd-removed";
>  			ddc = <&ddc0>;
> -			dmas = <&dma 10>;
> +			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;

This uses DT as a configuration language rather than a description here,
but this is most certainly an established practice that the bcm283-dma.c
supports, with no validation of the various arguments.. great.

Is there at least an option to move the meaning of this bitfields into
include/dt-bindings/dma/bcm2835-dma.h or something like that?
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 12/12] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio

[Florian Fainelli]

On 5/25/2021 6:23 AM, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
> panic and AXI priorities to avoid any DMA transfer error with HBR audio
> (8 channel, 192Hz).
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
>  arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 720beec54d61..9d1dde973680 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -344,7 +344,7 @@ hdmi0: hdmi@7ef00700 {
>  			interrupt-names = "cec-tx", "cec-rx", "cec-low",
>  					  "wakeup", "hpd-connected", "hpd-removed";
>  			ddc = <&ddc0>;
> -			dmas = <&dma 10>;
> +			dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;

This uses DT as a configuration language rather than a description here,
but this is most certainly an established practice that the bcm283-dma.c
supports, with no validation of the various arguments.. great.

Is there at least an option to move the meaning of this bitfields into
include/dt-bindings/dma/bcm2835-dma.h or something like that?
-- 
Florian

Re: [PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Takashi Iwai]

On Tue, 25 May 2021 15:23:43 +0200,
Maxime Ripard wrote:
> 
> The doc currently mentions that the IEC958 Playback Default should be
> exposed on the PCM iface, and the Playback Mask on the mixer iface.
> 
> It's a bit confusing to advise to have two related controls on two
> separate ifaces, and it looks like the drivers that currently expose
> those controls use any combination of the mixer and PCM ifaces.
> 
> Let's try to clarify the situation a bit, and encourage to at least have
> the controls on the same iface.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi


> ---
>  .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> index e6365836fa8b..01d59b8aea92 100644
> --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> @@ -3508,14 +3508,15 @@ field must be set, though).
>  
>  “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
>  status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
> -returns the bitmask for professional mode. They are read-only controls,
> -and are defined as MIXER controls (iface =
> -``SNDRV_CTL_ELEM_IFACE_MIXER``).
> +returns the bitmask for professional mode. They are read-only controls.
>  
>  Meanwhile, “IEC958 Playback Default” control is defined for getting and
> -setting the current default IEC958 bits. Note that this one is usually
> -defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
> -although in some places it's defined as a MIXER control.
> +setting the current default IEC958 bits.
> +
> +Due to historical reasons, both variants of the Playback Mask and the
> +Playback Default controls can be implemented on either a
> +``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
> +Drivers should expose the mask and default on the same iface though.
>  
>  In addition, you can define the control switches to enable/disable or to
>  set the raw bit mode. The implementation will depend on the chip, but
> -- 
> 2.31.1
> 

Re: [PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Takashi Iwai]

On Tue, 25 May 2021 15:23:43 +0200,
Maxime Ripard wrote:
> 
> The doc currently mentions that the IEC958 Playback Default should be
> exposed on the PCM iface, and the Playback Mask on the mixer iface.
> 
> It's a bit confusing to advise to have two related controls on two
> separate ifaces, and it looks like the drivers that currently expose
> those controls use any combination of the mixer and PCM ifaces.
> 
> Let's try to clarify the situation a bit, and encourage to at least have
> the controls on the same iface.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi


> ---
>  .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> index e6365836fa8b..01d59b8aea92 100644
> --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> @@ -3508,14 +3508,15 @@ field must be set, though).
>  
>  “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
>  status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
> -returns the bitmask for professional mode. They are read-only controls,
> -and are defined as MIXER controls (iface =
> -``SNDRV_CTL_ELEM_IFACE_MIXER``).
> +returns the bitmask for professional mode. They are read-only controls.
>  
>  Meanwhile, “IEC958 Playback Default” control is defined for getting and
> -setting the current default IEC958 bits. Note that this one is usually
> -defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
> -although in some places it's defined as a MIXER control.
> +setting the current default IEC958 bits.
> +
> +Due to historical reasons, both variants of the Playback Mask and the
> +Playback Default controls can be implemented on either a
> +``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
> +Drivers should expose the mask and default on the same iface though.
>  
>  In addition, you can define the control switches to enable/disable or to
>  set the raw bit mode. The implementation will depend on the chip, but
> -- 
> 2.31.1
> 

Re: [PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Takashi Iwai]

On Tue, 25 May 2021 15:23:43 +0200,
Maxime Ripard wrote:
> 
> The doc currently mentions that the IEC958 Playback Default should be
> exposed on the PCM iface, and the Playback Mask on the mixer iface.
> 
> It's a bit confusing to advise to have two related controls on two
> separate ifaces, and it looks like the drivers that currently expose
> those controls use any combination of the mixer and PCM ifaces.
> 
> Let's try to clarify the situation a bit, and encourage to at least have
> the controls on the same iface.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi


> ---
>  .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> index e6365836fa8b..01d59b8aea92 100644
> --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> @@ -3508,14 +3508,15 @@ field must be set, though).
>  
>  “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
>  status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
> -returns the bitmask for professional mode. They are read-only controls,
> -and are defined as MIXER controls (iface =
> -``SNDRV_CTL_ELEM_IFACE_MIXER``).
> +returns the bitmask for professional mode. They are read-only controls.
>  
>  Meanwhile, “IEC958 Playback Default” control is defined for getting and
> -setting the current default IEC958 bits. Note that this one is usually
> -defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
> -although in some places it's defined as a MIXER control.
> +setting the current default IEC958 bits.
> +
> +Due to historical reasons, both variants of the Playback Mask and the
> +Playback Default controls can be implemented on either a
> +``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
> +Drivers should expose the mask and default on the same iface though.
>  
>  In addition, you can define the control switches to enable/disable or to
>  set the raw bit mode. The implementation will depend on the chip, but
> -- 
> 2.31.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 01/12] ALSA: doc: Clarify IEC958 controls iface

[Takashi Iwai]

On Tue, 25 May 2021 15:23:43 +0200,
Maxime Ripard wrote:
> 
> The doc currently mentions that the IEC958 Playback Default should be
> exposed on the PCM iface, and the Playback Mask on the mixer iface.
> 
> It's a bit confusing to advise to have two related controls on two
> separate ifaces, and it looks like the drivers that currently expose
> those controls use any combination of the mixer and PCM ifaces.
> 
> Let's try to clarify the situation a bit, and encourage to at least have
> the controls on the same iface.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi


> ---
>  .../sound/kernel-api/writing-an-alsa-driver.rst     | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> index e6365836fa8b..01d59b8aea92 100644
> --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
> @@ -3508,14 +3508,15 @@ field must be set, though).
>  
>  “IEC958 Playback Con Mask” is used to return the bit-mask for the IEC958
>  status bits of consumer mode. Similarly, “IEC958 Playback Pro Mask”
> -returns the bitmask for professional mode. They are read-only controls,
> -and are defined as MIXER controls (iface =
> -``SNDRV_CTL_ELEM_IFACE_MIXER``).
> +returns the bitmask for professional mode. They are read-only controls.
>  
>  Meanwhile, “IEC958 Playback Default” control is defined for getting and
> -setting the current default IEC958 bits. Note that this one is usually
> -defined as a PCM control (iface = ``SNDRV_CTL_ELEM_IFACE_PCM``),
> -although in some places it's defined as a MIXER control.
> +setting the current default IEC958 bits.
> +
> +Due to historical reasons, both variants of the Playback Mask and the
> +Playback Default controls can be implemented on either a
> +``SNDRV_CTL_ELEM_IFACE_PCM`` or a ``SNDRV_CTL_ELEM_IFACE_MIXER`` iface.
> +Drivers should expose the mask and default on the same iface though.
>  
>  In addition, you can define the control switches to enable/disable or to
>  set the raw bit mode. The implementation will depend on the chip, but
> -- 
> 2.31.1
> 

Re: [PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Takashi Iwai]

On Tue, 25 May 2021 15:23:44 +0200,
Maxime Ripard wrote:
> 
> In some situations, like a codec probe, we need to provide an IEC status
> default but don't have access to the sampling rate and width yet since
> no stream has been configured yet.
> 
> Each and every driver has its own default, whereas the core iec958 code
> also has some buried in the snd_pcm_create_iec958_consumer functions.
> 
> Let's split these functions in two to provide a default that doesn't
> rely on the sampling rate and width, and another function to fill them
> when available.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi

> ---
>  include/sound/pcm_iec958.h |   8 ++
>  sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
>  2 files changed, 141 insertions(+), 43 deletions(-)
> 
> diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
> index 0939aa45e2fe..64e84441cde1 100644
> --- a/include/sound/pcm_iec958.h
> +++ b/include/sound/pcm_iec958.h
> @@ -4,6 +4,14 @@
>  
>  #include <linux/types.h>
>  
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
> +
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> +				 size_t len);
> +
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len);
> +
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len);
>  
> diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
> index f9a211cc1f2c..7a1b816f67cc 100644
> --- a/sound/core/pcm_iec958.c
> +++ b/sound/core/pcm_iec958.c
> @@ -9,41 +9,85 @@
>  #include <sound/pcm_params.h>
>  #include <sound/pcm_iec958.h>
>  
> -static int create_iec958_consumer(uint rate, uint sample_width,
> -				  u8 *cs, size_t len)
> +/**
> + * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Create the consumer format channel status data in @cs of maximum size
> + * @len. When relevant, the configuration-dependant bits will be set as
> + * unspecified.
> + *
> + * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
> + * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
> + * bits by their actual values.
> + *
> + * Drivers may wish to tweak the contents of the buffer after creation.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
>  {
> -	unsigned int fs, ws;
> -
>  	if (len < 4)
>  		return -EINVAL;
>  
> -	switch (rate) {
> -	case 32000:
> -		fs = IEC958_AES3_CON_FS_32000;
> -		break;
> -	case 44100:
> -		fs = IEC958_AES3_CON_FS_44100;
> -		break;
> -	case 48000:
> -		fs = IEC958_AES3_CON_FS_48000;
> -		break;
> -	case 88200:
> -		fs = IEC958_AES3_CON_FS_88200;
> -		break;
> -	case 96000:
> -		fs = IEC958_AES3_CON_FS_96000;
> -		break;
> -	case 176400:
> -		fs = IEC958_AES3_CON_FS_176400;
> -		break;
> -	case 192000:
> -		fs = IEC958_AES3_CON_FS_192000;
> -		break;
> -	default:
> +	memset(cs, 0, len);
> +
> +	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> +	cs[1] = IEC958_AES1_CON_GENERAL;
> +	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> +	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
> +
> +	if (len > 4)
> +		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
> +
> +	return len;
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
> +
> +static int fill_iec958_consumer(uint rate, uint sample_width,
> +				u8 *cs, size_t len)
> +{
> +	if (len < 4)
>  		return -EINVAL;
> +
> +	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
> +		unsigned int fs;
> +
> +		switch (rate) {
> +			case 32000:
> +				fs = IEC958_AES3_CON_FS_32000;
> +				break;
> +			case 44100:
> +				fs = IEC958_AES3_CON_FS_44100;
> +				break;
> +			case 48000:
> +				fs = IEC958_AES3_CON_FS_48000;
> +				break;
> +			case 88200:
> +				fs = IEC958_AES3_CON_FS_88200;
> +				break;
> +			case 96000:
> +				fs = IEC958_AES3_CON_FS_96000;
> +				break;
> +			case 176400:
> +				fs = IEC958_AES3_CON_FS_176400;
> +				break;
> +			case 192000:
> +				fs = IEC958_AES3_CON_FS_192000;
> +				break;
> +			default:
> +				return -EINVAL;
> +		}
> +
> +		cs[3] &= ~IEC958_AES3_CON_FS;
> +		cs[3] |= fs;
>  	}
>  
> -	if (len > 4) {
> +	if (len > 4 &&
> +	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
> +		unsigned int ws;
> +
>  		switch (sample_width) {
>  		case 16:
>  			ws = IEC958_AES4_CON_WORDLEN_20_16;
> @@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  		default:
>  			return -EINVAL;
>  		}
> +
> +		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
> +		cs[4] |= ws;
>  	}
>  
> -	memset(cs, 0, len);
> -
> -	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> -	cs[1] = IEC958_AES1_CON_GENERAL;
> -	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> -	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
> -
> -	if (len > 4)
> -		cs[4] = ws;
> -
>  	return len;
>  }
>  
> +/**
> + * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
> + * @runtime: pcm runtime structure with ->rate filled in
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM runtime @runtime.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
> +				 u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(runtime->rate,
> +				    snd_pcm_format_width(runtime->format),
> +				    cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
> +
> +/**
> + * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
> + * @params: the hw_params instance for extracting rate and sample format
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM hardware parameters @params.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled..
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
> +
>  /**
>   * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
>   * @runtime: pcm runtime structure with ->rate filled in
> @@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len)
>  {
> -	return create_iec958_consumer(runtime->rate,
> -				      snd_pcm_format_width(runtime->format),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  
> @@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
>  					     u8 *cs, size_t len)
>  {
> -	return create_iec958_consumer(params_rate(params), params_width(params),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
> -- 
> 2.31.1
> 

Re: [PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Takashi Iwai]

On Tue, 25 May 2021 15:23:44 +0200,
Maxime Ripard wrote:
> 
> In some situations, like a codec probe, we need to provide an IEC status
> default but don't have access to the sampling rate and width yet since
> no stream has been configured yet.
> 
> Each and every driver has its own default, whereas the core iec958 code
> also has some buried in the snd_pcm_create_iec958_consumer functions.
> 
> Let's split these functions in two to provide a default that doesn't
> rely on the sampling rate and width, and another function to fill them
> when available.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi

> ---
>  include/sound/pcm_iec958.h |   8 ++
>  sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
>  2 files changed, 141 insertions(+), 43 deletions(-)
> 
> diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
> index 0939aa45e2fe..64e84441cde1 100644
> --- a/include/sound/pcm_iec958.h
> +++ b/include/sound/pcm_iec958.h
> @@ -4,6 +4,14 @@
>  
>  #include <linux/types.h>
>  
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
> +
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> +				 size_t len);
> +
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len);
> +
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len);
>  
> diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
> index f9a211cc1f2c..7a1b816f67cc 100644
> --- a/sound/core/pcm_iec958.c
> +++ b/sound/core/pcm_iec958.c
> @@ -9,41 +9,85 @@
>  #include <sound/pcm_params.h>
>  #include <sound/pcm_iec958.h>
>  
> -static int create_iec958_consumer(uint rate, uint sample_width,
> -				  u8 *cs, size_t len)
> +/**
> + * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Create the consumer format channel status data in @cs of maximum size
> + * @len. When relevant, the configuration-dependant bits will be set as
> + * unspecified.
> + *
> + * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
> + * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
> + * bits by their actual values.
> + *
> + * Drivers may wish to tweak the contents of the buffer after creation.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
>  {
> -	unsigned int fs, ws;
> -
>  	if (len < 4)
>  		return -EINVAL;
>  
> -	switch (rate) {
> -	case 32000:
> -		fs = IEC958_AES3_CON_FS_32000;
> -		break;
> -	case 44100:
> -		fs = IEC958_AES3_CON_FS_44100;
> -		break;
> -	case 48000:
> -		fs = IEC958_AES3_CON_FS_48000;
> -		break;
> -	case 88200:
> -		fs = IEC958_AES3_CON_FS_88200;
> -		break;
> -	case 96000:
> -		fs = IEC958_AES3_CON_FS_96000;
> -		break;
> -	case 176400:
> -		fs = IEC958_AES3_CON_FS_176400;
> -		break;
> -	case 192000:
> -		fs = IEC958_AES3_CON_FS_192000;
> -		break;
> -	default:
> +	memset(cs, 0, len);
> +
> +	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> +	cs[1] = IEC958_AES1_CON_GENERAL;
> +	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> +	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
> +
> +	if (len > 4)
> +		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
> +
> +	return len;
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
> +
> +static int fill_iec958_consumer(uint rate, uint sample_width,
> +				u8 *cs, size_t len)
> +{
> +	if (len < 4)
>  		return -EINVAL;
> +
> +	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
> +		unsigned int fs;
> +
> +		switch (rate) {
> +			case 32000:
> +				fs = IEC958_AES3_CON_FS_32000;
> +				break;
> +			case 44100:
> +				fs = IEC958_AES3_CON_FS_44100;
> +				break;
> +			case 48000:
> +				fs = IEC958_AES3_CON_FS_48000;
> +				break;
> +			case 88200:
> +				fs = IEC958_AES3_CON_FS_88200;
> +				break;
> +			case 96000:
> +				fs = IEC958_AES3_CON_FS_96000;
> +				break;
> +			case 176400:
> +				fs = IEC958_AES3_CON_FS_176400;
> +				break;
> +			case 192000:
> +				fs = IEC958_AES3_CON_FS_192000;
> +				break;
> +			default:
> +				return -EINVAL;
> +		}
> +
> +		cs[3] &= ~IEC958_AES3_CON_FS;
> +		cs[3] |= fs;
>  	}
>  
> -	if (len > 4) {
> +	if (len > 4 &&
> +	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
> +		unsigned int ws;
> +
>  		switch (sample_width) {
>  		case 16:
>  			ws = IEC958_AES4_CON_WORDLEN_20_16;
> @@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  		default:
>  			return -EINVAL;
>  		}
> +
> +		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
> +		cs[4] |= ws;
>  	}
>  
> -	memset(cs, 0, len);
> -
> -	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> -	cs[1] = IEC958_AES1_CON_GENERAL;
> -	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> -	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
> -
> -	if (len > 4)
> -		cs[4] = ws;
> -
>  	return len;
>  }
>  
> +/**
> + * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
> + * @runtime: pcm runtime structure with ->rate filled in
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM runtime @runtime.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
> +				 u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(runtime->rate,
> +				    snd_pcm_format_width(runtime->format),
> +				    cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
> +
> +/**
> + * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
> + * @params: the hw_params instance for extracting rate and sample format
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM hardware parameters @params.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled..
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
> +
>  /**
>   * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
>   * @runtime: pcm runtime structure with ->rate filled in
> @@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len)
>  {
> -	return create_iec958_consumer(runtime->rate,
> -				      snd_pcm_format_width(runtime->format),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  
> @@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
>  					     u8 *cs, size_t len)
>  {
> -	return create_iec958_consumer(params_rate(params), params_width(params),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
> -- 
> 2.31.1
> 

Re: [PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Takashi Iwai]

On Tue, 25 May 2021 15:23:44 +0200,
Maxime Ripard wrote:
> 
> In some situations, like a codec probe, we need to provide an IEC status
> default but don't have access to the sampling rate and width yet since
> no stream has been configured yet.
> 
> Each and every driver has its own default, whereas the core iec958 code
> also has some buried in the snd_pcm_create_iec958_consumer functions.
> 
> Let's split these functions in two to provide a default that doesn't
> rely on the sampling rate and width, and another function to fill them
> when available.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi

> ---
>  include/sound/pcm_iec958.h |   8 ++
>  sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
>  2 files changed, 141 insertions(+), 43 deletions(-)
> 
> diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
> index 0939aa45e2fe..64e84441cde1 100644
> --- a/include/sound/pcm_iec958.h
> +++ b/include/sound/pcm_iec958.h
> @@ -4,6 +4,14 @@
>  
>  #include <linux/types.h>
>  
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
> +
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> +				 size_t len);
> +
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len);
> +
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len);
>  
> diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
> index f9a211cc1f2c..7a1b816f67cc 100644
> --- a/sound/core/pcm_iec958.c
> +++ b/sound/core/pcm_iec958.c
> @@ -9,41 +9,85 @@
>  #include <sound/pcm_params.h>
>  #include <sound/pcm_iec958.h>
>  
> -static int create_iec958_consumer(uint rate, uint sample_width,
> -				  u8 *cs, size_t len)
> +/**
> + * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Create the consumer format channel status data in @cs of maximum size
> + * @len. When relevant, the configuration-dependant bits will be set as
> + * unspecified.
> + *
> + * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
> + * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
> + * bits by their actual values.
> + *
> + * Drivers may wish to tweak the contents of the buffer after creation.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
>  {
> -	unsigned int fs, ws;
> -
>  	if (len < 4)
>  		return -EINVAL;
>  
> -	switch (rate) {
> -	case 32000:
> -		fs = IEC958_AES3_CON_FS_32000;
> -		break;
> -	case 44100:
> -		fs = IEC958_AES3_CON_FS_44100;
> -		break;
> -	case 48000:
> -		fs = IEC958_AES3_CON_FS_48000;
> -		break;
> -	case 88200:
> -		fs = IEC958_AES3_CON_FS_88200;
> -		break;
> -	case 96000:
> -		fs = IEC958_AES3_CON_FS_96000;
> -		break;
> -	case 176400:
> -		fs = IEC958_AES3_CON_FS_176400;
> -		break;
> -	case 192000:
> -		fs = IEC958_AES3_CON_FS_192000;
> -		break;
> -	default:
> +	memset(cs, 0, len);
> +
> +	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> +	cs[1] = IEC958_AES1_CON_GENERAL;
> +	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> +	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
> +
> +	if (len > 4)
> +		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
> +
> +	return len;
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
> +
> +static int fill_iec958_consumer(uint rate, uint sample_width,
> +				u8 *cs, size_t len)
> +{
> +	if (len < 4)
>  		return -EINVAL;
> +
> +	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
> +		unsigned int fs;
> +
> +		switch (rate) {
> +			case 32000:
> +				fs = IEC958_AES3_CON_FS_32000;
> +				break;
> +			case 44100:
> +				fs = IEC958_AES3_CON_FS_44100;
> +				break;
> +			case 48000:
> +				fs = IEC958_AES3_CON_FS_48000;
> +				break;
> +			case 88200:
> +				fs = IEC958_AES3_CON_FS_88200;
> +				break;
> +			case 96000:
> +				fs = IEC958_AES3_CON_FS_96000;
> +				break;
> +			case 176400:
> +				fs = IEC958_AES3_CON_FS_176400;
> +				break;
> +			case 192000:
> +				fs = IEC958_AES3_CON_FS_192000;
> +				break;
> +			default:
> +				return -EINVAL;
> +		}
> +
> +		cs[3] &= ~IEC958_AES3_CON_FS;
> +		cs[3] |= fs;
>  	}
>  
> -	if (len > 4) {
> +	if (len > 4 &&
> +	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
> +		unsigned int ws;
> +
>  		switch (sample_width) {
>  		case 16:
>  			ws = IEC958_AES4_CON_WORDLEN_20_16;
> @@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  		default:
>  			return -EINVAL;
>  		}
> +
> +		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
> +		cs[4] |= ws;
>  	}
>  
> -	memset(cs, 0, len);
> -
> -	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> -	cs[1] = IEC958_AES1_CON_GENERAL;
> -	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> -	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
> -
> -	if (len > 4)
> -		cs[4] = ws;
> -
>  	return len;
>  }
>  
> +/**
> + * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
> + * @runtime: pcm runtime structure with ->rate filled in
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM runtime @runtime.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
> +				 u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(runtime->rate,
> +				    snd_pcm_format_width(runtime->format),
> +				    cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
> +
> +/**
> + * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
> + * @params: the hw_params instance for extracting rate and sample format
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM hardware parameters @params.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled..
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
> +
>  /**
>   * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
>   * @runtime: pcm runtime structure with ->rate filled in
> @@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len)
>  {
> -	return create_iec958_consumer(runtime->rate,
> -				      snd_pcm_format_width(runtime->format),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  
> @@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
>  					     u8 *cs, size_t len)
>  {
> -	return create_iec958_consumer(params_rate(params), params_width(params),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
> -- 
> 2.31.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 02/12] ALSA: iec958: Split status creation and fill

[Takashi Iwai]

On Tue, 25 May 2021 15:23:44 +0200,
Maxime Ripard wrote:
> 
> In some situations, like a codec probe, we need to provide an IEC status
> default but don't have access to the sampling rate and width yet since
> no stream has been configured yet.
> 
> Each and every driver has its own default, whereas the core iec958 code
> also has some buried in the snd_pcm_create_iec958_consumer functions.
> 
> Let's split these functions in two to provide a default that doesn't
> rely on the sampling rate and width, and another function to fill them
> when available.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Takashi Iwai <tiwai@suse.de>


thanks,

Takashi

> ---
>  include/sound/pcm_iec958.h |   8 ++
>  sound/core/pcm_iec958.c    | 176 ++++++++++++++++++++++++++++---------
>  2 files changed, 141 insertions(+), 43 deletions(-)
> 
> diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
> index 0939aa45e2fe..64e84441cde1 100644
> --- a/include/sound/pcm_iec958.h
> +++ b/include/sound/pcm_iec958.h
> @@ -4,6 +4,14 @@
>  
>  #include <linux/types.h>
>  
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
> +
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> +				 size_t len);
> +
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len);
> +
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len);
>  
> diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
> index f9a211cc1f2c..7a1b816f67cc 100644
> --- a/sound/core/pcm_iec958.c
> +++ b/sound/core/pcm_iec958.c
> @@ -9,41 +9,85 @@
>  #include <sound/pcm_params.h>
>  #include <sound/pcm_iec958.h>
>  
> -static int create_iec958_consumer(uint rate, uint sample_width,
> -				  u8 *cs, size_t len)
> +/**
> + * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Create the consumer format channel status data in @cs of maximum size
> + * @len. When relevant, the configuration-dependant bits will be set as
> + * unspecified.
> + *
> + * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
> + * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
> + * bits by their actual values.
> + *
> + * Drivers may wish to tweak the contents of the buffer after creation.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
>  {
> -	unsigned int fs, ws;
> -
>  	if (len < 4)
>  		return -EINVAL;
>  
> -	switch (rate) {
> -	case 32000:
> -		fs = IEC958_AES3_CON_FS_32000;
> -		break;
> -	case 44100:
> -		fs = IEC958_AES3_CON_FS_44100;
> -		break;
> -	case 48000:
> -		fs = IEC958_AES3_CON_FS_48000;
> -		break;
> -	case 88200:
> -		fs = IEC958_AES3_CON_FS_88200;
> -		break;
> -	case 96000:
> -		fs = IEC958_AES3_CON_FS_96000;
> -		break;
> -	case 176400:
> -		fs = IEC958_AES3_CON_FS_176400;
> -		break;
> -	case 192000:
> -		fs = IEC958_AES3_CON_FS_192000;
> -		break;
> -	default:
> +	memset(cs, 0, len);
> +
> +	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> +	cs[1] = IEC958_AES1_CON_GENERAL;
> +	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> +	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
> +
> +	if (len > 4)
> +		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
> +
> +	return len;
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
> +
> +static int fill_iec958_consumer(uint rate, uint sample_width,
> +				u8 *cs, size_t len)
> +{
> +	if (len < 4)
>  		return -EINVAL;
> +
> +	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
> +		unsigned int fs;
> +
> +		switch (rate) {
> +			case 32000:
> +				fs = IEC958_AES3_CON_FS_32000;
> +				break;
> +			case 44100:
> +				fs = IEC958_AES3_CON_FS_44100;
> +				break;
> +			case 48000:
> +				fs = IEC958_AES3_CON_FS_48000;
> +				break;
> +			case 88200:
> +				fs = IEC958_AES3_CON_FS_88200;
> +				break;
> +			case 96000:
> +				fs = IEC958_AES3_CON_FS_96000;
> +				break;
> +			case 176400:
> +				fs = IEC958_AES3_CON_FS_176400;
> +				break;
> +			case 192000:
> +				fs = IEC958_AES3_CON_FS_192000;
> +				break;
> +			default:
> +				return -EINVAL;
> +		}
> +
> +		cs[3] &= ~IEC958_AES3_CON_FS;
> +		cs[3] |= fs;
>  	}
>  
> -	if (len > 4) {
> +	if (len > 4 &&
> +	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
> +		unsigned int ws;
> +
>  		switch (sample_width) {
>  		case 16:
>  			ws = IEC958_AES4_CON_WORDLEN_20_16;
> @@ -64,21 +108,58 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  		default:
>  			return -EINVAL;
>  		}
> +
> +		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
> +		cs[4] |= ws;
>  	}
>  
> -	memset(cs, 0, len);
> -
> -	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> -	cs[1] = IEC958_AES1_CON_GENERAL;
> -	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> -	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
> -
> -	if (len > 4)
> -		cs[4] = ws;
> -
>  	return len;
>  }
>  
> +/**
> + * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
> + * @runtime: pcm runtime structure with ->rate filled in
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM runtime @runtime.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled.
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
> +				 u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(runtime->rate,
> +				    snd_pcm_format_width(runtime->format),
> +				    cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
> +
> +/**
> + * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
> + * @params: the hw_params instance for extracting rate and sample format
> + * @cs: channel status buffer, at least four bytes
> + * @len: length of channel status buffer
> + *
> + * Fill the unspecified bits in an IEC958 status bits array using the
> + * parameters of the PCM hardware parameters @params.
> + *
> + * Drivers may wish to tweak the contents of the buffer after its been
> + * filled..
> + *
> + * Returns: length of buffer, or negative error code if something failed.
> + */
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
> +}
> +EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
> +
>  /**
>   * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
>   * @runtime: pcm runtime structure with ->rate filled in
> @@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len)
>  {
> -	return create_iec958_consumer(runtime->rate,
> -				      snd_pcm_format_width(runtime->format),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  
> @@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
>  					     u8 *cs, size_t len)
>  {
> -	return create_iec958_consumer(params_rate(params), params_width(params),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
> -- 
> 2.31.1
> 

Re: [PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 245 bytes --]

On Tue, May 25, 2021 at 03:23:45PM +0200, Maxime Ripard wrote:
> We're going to add more controls to support the IEC958 output, so let's
> rework the control registration a bit to support more of them.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 245 bytes --]

On Tue, May 25, 2021 at 03:23:45PM +0200, Maxime Ripard wrote:
> We're going to add more controls to support the IEC958 output, so let's
> rework the control registration a bit to support more of them.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 245 bytes --]

On Tue, May 25, 2021 at 03:23:45PM +0200, Maxime Ripard wrote:
> We're going to add more controls to support the IEC958 output, so let's
> rework the control registration a bit to support more of them.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 03/12] ASoC: hdmi-codec: Rework to support more controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 245 bytes --]

On Tue, May 25, 2021 at 03:23:45PM +0200, Maxime Ripard wrote:
> We're going to add more controls to support the IEC958 output, so let's
> rework the control registration a bit to support more of them.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 211 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 211 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 211 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 211 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 390 bytes --]

On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> The IEC958 status bit is usually set by the userspace after hw_params
> has been called, so in order to use whatever is set by the userspace, we
> need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> and mandate that either prepare or hw_params is implemented.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 390 bytes --]

On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> The IEC958 status bit is usually set by the userspace after hw_params
> has been called, so in order to use whatever is set by the userspace, we
> need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> and mandate that either prepare or hw_params is implemented.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 390 bytes --]

On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> The IEC958 status bit is usually set by the userspace after hw_params
> has been called, so in order to use whatever is set by the userspace, we
> need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> and mandate that either prepare or hw_params is implemented.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 390 bytes --]

On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> The IEC958 status bit is usually set by the userspace after hw_params
> has been called, so in order to use whatever is set by the userspace, we
> need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> and mandate that either prepare or hw_params is implemented.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 750 bytes --]

Hi Mark, Takashi,

On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > The IEC958 status bit is usually set by the userspace after hw_params
> > has been called, so in order to use whatever is set by the userspace, we
> > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > and mandate that either prepare or hw_params is implemented.
> 
> Acked-by: Mark Brown <broonie@kernel.org>

It looks like you're both happy with the ALSA/ASoC side, how do you want
to get this merged?

There's a build dependency between the DRM bits and the new hook
introduced in hdmi-codec, would you be ok with merging it through the
drm tree?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 750 bytes --]

Hi Mark, Takashi,

On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > The IEC958 status bit is usually set by the userspace after hw_params
> > has been called, so in order to use whatever is set by the userspace, we
> > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > and mandate that either prepare or hw_params is implemented.
> 
> Acked-by: Mark Brown <broonie@kernel.org>

It looks like you're both happy with the ALSA/ASoC side, how do you want
to get this merged?

There's a build dependency between the DRM bits and the new hook
introduced in hdmi-codec, would you be ok with merging it through the
drm tree?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 750 bytes --]

Hi Mark, Takashi,

On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > The IEC958 status bit is usually set by the userspace after hw_params
> > has been called, so in order to use whatever is set by the userspace, we
> > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > and mandate that either prepare or hw_params is implemented.
> 
> Acked-by: Mark Brown <broonie@kernel.org>

It looks like you're both happy with the ALSA/ASoC side, how do you want
to get this merged?

There's a build dependency between the DRM bits and the new hook
introduced in hdmi-codec, would you be ok with merging it through the
drm tree?

Maxime

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 750 bytes --]

Hi Mark, Takashi,

On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > The IEC958 status bit is usually set by the userspace after hw_params
> > has been called, so in order to use whatever is set by the userspace, we
> > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > and mandate that either prepare or hw_params is implemented.
> 
> Acked-by: Mark Brown <broonie@kernel.org>

It looks like you're both happy with the ALSA/ASoC side, how do you want
to get this merged?

There's a build dependency between the DRM bits and the new hook
introduced in hdmi-codec, would you be ok with merging it through the
drm tree?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Takashi Iwai]

On Mon, 31 May 2021 11:42:13 +0200,
Maxime Ripard wrote:
> 
> Hi Mark, Takashi,
> 
> On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> > On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > > The IEC958 status bit is usually set by the userspace after hw_params
> > > has been called, so in order to use whatever is set by the userspace, we
> > > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > > and mandate that either prepare or hw_params is implemented.
> > 
> > Acked-by: Mark Brown <broonie@kernel.org>
> 
> It looks like you're both happy with the ALSA/ASoC side, how do you want
> to get this merged?
> 
> There's a build dependency between the DRM bits and the new hook
> introduced in hdmi-codec, would you be ok with merging it through the
> drm tree?

Speaking of ALSA core changes, I'm fine with that.


thanks,

Takashi

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Takashi Iwai]

On Mon, 31 May 2021 11:42:13 +0200,
Maxime Ripard wrote:
> 
> Hi Mark, Takashi,
> 
> On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> > On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > > The IEC958 status bit is usually set by the userspace after hw_params
> > > has been called, so in order to use whatever is set by the userspace, we
> > > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > > and mandate that either prepare or hw_params is implemented.
> > 
> > Acked-by: Mark Brown <broonie@kernel.org>
> 
> It looks like you're both happy with the ALSA/ASoC side, how do you want
> to get this merged?
> 
> There's a build dependency between the DRM bits and the new hook
> introduced in hdmi-codec, would you be ok with merging it through the
> drm tree?

Speaking of ALSA core changes, I'm fine with that.


thanks,

Takashi

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Takashi Iwai]

On Mon, 31 May 2021 11:42:13 +0200,
Maxime Ripard wrote:
> 
> Hi Mark, Takashi,
> 
> On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> > On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > > The IEC958 status bit is usually set by the userspace after hw_params
> > > has been called, so in order to use whatever is set by the userspace, we
> > > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > > and mandate that either prepare or hw_params is implemented.
> > 
> > Acked-by: Mark Brown <broonie@kernel.org>
> 
> It looks like you're both happy with the ALSA/ASoC side, how do you want
> to get this merged?
> 
> There's a build dependency between the DRM bits and the new hook
> introduced in hdmi-codec, would you be ok with merging it through the
> drm tree?

Speaking of ALSA core changes, I'm fine with that.


thanks,

Takashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Takashi Iwai]

On Mon, 31 May 2021 11:42:13 +0200,
Maxime Ripard wrote:
> 
> Hi Mark, Takashi,
> 
> On Wed, May 26, 2021 at 11:39:21AM +0100, Mark Brown wrote:
> > On Tue, May 25, 2021 at 03:23:47PM +0200, Maxime Ripard wrote:
> > > The IEC958 status bit is usually set by the userspace after hw_params
> > > has been called, so in order to use whatever is set by the userspace, we
> > > need to implement the prepare hook. Let's add it to the hdmi_codec_ops,
> > > and mandate that either prepare or hw_params is implemented.
> > 
> > Acked-by: Mark Brown <broonie@kernel.org>
> 
> It looks like you're both happy with the ALSA/ASoC side, how do you want
> to get this merged?
> 
> There's a build dependency between the DRM bits and the new hook
> introduced in hdmi-codec, would you be ok with merging it through the
> drm tree?

Speaking of ALSA core changes, I'm fine with that.


thanks,

Takashi

Re: [PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Symptom is random switching of speakers when using multichannel.
> 
> Repeatedly running speakertest -c8 occasionally starts with
> channels jumbled. This is fixed with HD_CTL_WHOLSMP.
> 
> The other bit looks beneficial and apears harmless in testing so
> I'd suggest adding it too.
> 
> Documentation says: HD_CTL_WHILSMP_SET
> Wait for whole sample. When this bit is set MAI transmit will start
> only when there is at least one whole sample available in the fifo.
> 
> Documentation says: HD_CTL_CHALIGN_SET
> Channel Align When Overflow. This bit is used to realign the audio
> channels in case of an overflow.
> If this bit is set, after the detection of an overflow, equal
> amount of dummy words to the missing words will be written to fifo,
> filling up the broken sample and maintaining alignment.
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Symptom is random switching of speakers when using multichannel.
> 
> Repeatedly running speakertest -c8 occasionally starts with
> channels jumbled. This is fixed with HD_CTL_WHOLSMP.
> 
> The other bit looks beneficial and apears harmless in testing so
> I'd suggest adding it too.
> 
> Documentation says: HD_CTL_WHILSMP_SET
> Wait for whole sample. When this bit is set MAI transmit will start
> only when there is at least one whole sample available in the fifo.
> 
> Documentation says: HD_CTL_CHALIGN_SET
> Channel Align When Overflow. This bit is used to realign the audio
> channels in case of an overflow.
> If this bit is set, after the detection of an overflow, equal
> amount of dummy words to the missing words will be written to fifo,
> filling up the broken sample and maintaining alignment.
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Symptom is random switching of speakers when using multichannel.
> 
> Repeatedly running speakertest -c8 occasionally starts with
> channels jumbled. This is fixed with HD_CTL_WHOLSMP.
> 
> The other bit looks beneficial and apears harmless in testing so
> I'd suggest adding it too.
> 
> Documentation says: HD_CTL_WHILSMP_SET
> Wait for whole sample. When this bit is set MAI transmit will start
> only when there is at least one whole sample available in the fifo.
> 
> Documentation says: HD_CTL_CHALIGN_SET
> Channel Align When Overflow. This bit is used to realign the audio
> channels in case of an overflow.
> If this bit is set, after the detection of an overflow, equal
> amount of dummy words to the missing words will be written to fifo,
> filling up the broken sample and maintaining alignment.
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 06/12] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Symptom is random switching of speakers when using multichannel.
> 
> Repeatedly running speakertest -c8 occasionally starts with
> channels jumbled. This is fixed with HD_CTL_WHOLSMP.
> 
> The other bit looks beneficial and apears harmless in testing so
> I'd suggest adding it too.
> 
> Documentation says: HD_CTL_WHILSMP_SET
> Wait for whole sample. When this bit is set MAI transmit will start
> only when there is at least one whole sample available in the fifo.
> 
> Documentation says: HD_CTL_CHALIGN_SET
> Channel Align When Overflow. This bit is used to realign the audio
> channels in case of an overflow.
> If this bit is set, after the detection of an overflow, equal
> amount of dummy words to the missing words will be written to fifo,
> filling up the broken sample and maintaining alignment.
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> The hardware uses this for generating the right audio
> data island packets when using formats other than PCM
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> The hardware uses this for generating the right audio
> data island packets when using formats other than PCM
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> The hardware uses this for generating the right audio
> data island packets when using formats other than PCM
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 07/12] drm/vc4: hdmi: Set HDMI_MAI_FMT

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> The hardware uses this for generating the right audio
> data island packets when using formats other than PCM
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Without this bit set, HDMI_MAI_FORMAT doesn't pick up
> the format and samplerate from DVP_CFG_MAI0_FMT and you
> can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Without this bit set, HDMI_MAI_FORMAT doesn't pick up
> the format and samplerate from DVP_CFG_MAI0_FMT and you
> can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Without this bit set, HDMI_MAI_FORMAT doesn't pick up
> the format and samplerate from DVP_CFG_MAI0_FMT and you
> can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 08/12] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> Without this bit set, HDMI_MAI_FORMAT doesn't pick up
> the format and samplerate from DVP_CFG_MAI0_FMT and you
> can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode
> 
> Signed-off-by: Dom Cobley <popcornmix@gmail.com>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> This was a workaround for bugs in hardware on earlier Pi models
> and wasn't totally successful.

What's to expect sound wise on older RPis?

Regards,
Nicolas

Re: [PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> This was a workaround for bugs in hardware on earlier Pi models
> and wasn't totally successful.

What's to expect sound wise on older RPis?

Regards,
Nicolas

Re: [PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> This was a workaround for bugs in hardware on earlier Pi models
> and wasn't totally successful.

What's to expect sound wise on older RPis?

Regards,
Nicolas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> From: Dom Cobley <popcornmix@gmail.com>
> 
> This was a workaround for bugs in hardware on earlier Pi models
> and wasn't totally successful.

What's to expect sound wise on older RPis?

Regards,
Nicolas

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> The hdmi-codec brings a lot of advanced features, including the HDMI
> channel mapping. Let's use it in our driver instead of our own codec.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> The hdmi-codec brings a lot of advanced features, including the HDMI
> channel mapping. Let's use it in our driver instead of our own codec.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> The hdmi-codec brings a lot of advanced features, including the HDMI
> channel mapping. Let's use it in our driver instead of our own codec.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> The hdmi-codec brings a lot of advanced features, including the HDMI
> channel mapping. Let's use it in our driver instead of our own codec.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Adding a commit message would've been nice. But I guess the patch is trivial
enough.

Other than that:

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Adding a commit message would've been nice. But I guess the patch is trivial
enough.

Other than that:

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Adding a commit message would've been nice. But I guess the patch is trivial
enough.

Other than that:

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 11/12] drm/vc4: hdmi: Remove redundant variables

[nicolas saenz julienne]

On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Adding a commit message would've been nice. But I guess the patch is trivial
enough.

Other than that:

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Regards,
Nicolas

Re: [PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[Dom Cobley]

On Tue, 1 Jun 2021 at 09:52, nicolas saenz julienne <nsaenz@kernel.org>
wrote:

> What's to expect sound wise on older RPis?


I'd say 8 channel 48kHz is good. 2 channel 192KHz is good.
Higher than that and we start to lose samples in the HDMI MAI bus fifo.

The firmware workaround made 4 channel 192kHz somewhat more reliable, but
it would still fail when sdram was busy,
so I don't think it's worth maintaining that.

Re: [PATCH v2 09/12] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting

[Dom Cobley]

[-- Attachment #1: Type: text/plain, Size: 420 bytes --]

On Tue, 1 Jun 2021 at 09:52, nicolas saenz julienne <nsaenz@kernel.org>
wrote:

> What's to expect sound wise on older RPis?


I'd say 8 channel 48kHz is good. 2 channel 192KHz is good.
Higher than that and we start to lose samples in the HDMI MAI bus fifo.

The firmware workaround made 4 channel 192kHz somewhat more reliable, but
it would still fail when sdram was busy,
so I don't think it's worth maintaining that.

[-- Attachment #2: Type: text/html, Size: 824 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 402 bytes --]

On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> Maxime Ripard wrote:

> > There's a build dependency between the DRM bits and the new hook
> > introduced in hdmi-codec, would you be ok with merging it through the
> > drm tree?

> Speaking of ALSA core changes, I'm fine with that.

Yeah, a pull request for the shared bits would be handy in case there's
some collision with other work.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 402 bytes --]

On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> Maxime Ripard wrote:

> > There's a build dependency between the DRM bits and the new hook
> > introduced in hdmi-codec, would you be ok with merging it through the
> > drm tree?

> Speaking of ALSA core changes, I'm fine with that.

Yeah, a pull request for the shared bits would be handy in case there's
some collision with other work.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 402 bytes --]

On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> Maxime Ripard wrote:

> > There's a build dependency between the DRM bits and the new hook
> > introduced in hdmi-codec, would you be ok with merging it through the
> > drm tree?

> Speaking of ALSA core changes, I'm fine with that.

Yeah, a pull request for the shared bits would be handy in case there's
some collision with other work.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 402 bytes --]

On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> Maxime Ripard wrote:

> > There's a build dependency between the DRM bits and the new hook
> > introduced in hdmi-codec, would you be ok with merging it through the
> > drm tree?

> Speaking of ALSA core changes, I'm fine with that.

Yeah, a pull request for the shared bits would be handy in case there's
some collision with other work.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]

Hi,

On Tue, Jun 01, 2021 at 01:36:24PM +0100, Mark Brown wrote:
> On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> > Maxime Ripard wrote:
> 
> > > There's a build dependency between the DRM bits and the new hook
> > > introduced in hdmi-codec, would you be ok with merging it through the
> > > drm tree?
> 
> > Speaking of ALSA core changes, I'm fine with that.
> 
> Yeah, a pull request for the shared bits would be handy in case there's
> some collision with other work.

I guess the easiest then would be for you to merge the patches and send
a PR? Assuming you don't want to pull half of DRM of course :)

Maxime


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]

Hi,

On Tue, Jun 01, 2021 at 01:36:24PM +0100, Mark Brown wrote:
> On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> > Maxime Ripard wrote:
> 
> > > There's a build dependency between the DRM bits and the new hook
> > > introduced in hdmi-codec, would you be ok with merging it through the
> > > drm tree?
> 
> > Speaking of ALSA core changes, I'm fine with that.
> 
> Yeah, a pull request for the shared bits would be handy in case there's
> some collision with other work.

I guess the easiest then would be for you to merge the patches and send
a PR? Assuming you don't want to pull half of DRM of course :)

Maxime


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 654 bytes --]

Hi,

On Tue, Jun 01, 2021 at 01:36:24PM +0100, Mark Brown wrote:
> On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> > Maxime Ripard wrote:
> 
> > > There's a build dependency between the DRM bits and the new hook
> > > introduced in hdmi-codec, would you be ok with merging it through the
> > > drm tree?
> 
> > Speaking of ALSA core changes, I'm fine with that.
> 
> Yeah, a pull request for the shared bits would be handy in case there's
> some collision with other work.

I guess the easiest then would be for you to merge the patches and send
a PR? Assuming you don't want to pull half of DRM of course :)

Maxime


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/12] ASoC: hdmi-codec: Add a prepare hook

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 654 bytes --]

Hi,

On Tue, Jun 01, 2021 at 01:36:24PM +0100, Mark Brown wrote:
> On Mon, May 31, 2021 at 01:12:17PM +0200, Takashi Iwai wrote:
> > Maxime Ripard wrote:
> 
> > > There's a build dependency between the DRM bits and the new hook
> > > introduced in hdmi-codec, would you be ok with merging it through the
> > > drm tree?
> 
> > Speaking of ALSA core changes, I'm fine with that.
> 
> Yeah, a pull request for the shared bits would be handy in case there's
> some collision with other work.

I guess the easiest then would be for you to merge the patches and send
a PR? Assuming you don't want to pull half of DRM of course :)

Maxime


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 703 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.
> 
> This patch implements those controls for the hdmi-codec driver. It
> relies on a default value being setup at probe time that can later be
> overridden by the control put.

This breaks bisection:

/mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
/mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
  memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
                                                  ^~

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 703 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.
> 
> This patch implements those controls for the hdmi-codec driver. It
> relies on a default value being setup at probe time that can later be
> overridden by the control put.

This breaks bisection:

/mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
/mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
  memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
                                                  ^~

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 703 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.
> 
> This patch implements those controls for the hdmi-codec driver. It
> relies on a default value being setup at probe time that can later be
> overridden by the control put.

This breaks bisection:

/mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
/mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
  memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
                                                  ^~

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 703 bytes --]

On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> The IEC958 status bits can be exposed and modified by the userspace
> through dedicated ALSA controls.
> 
> This patch implements those controls for the hdmi-codec driver. It
> relies on a default value being setup at probe time that can later be
> overridden by the control put.

This breaks bisection:

/mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
/mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
  memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
                                                  ^~

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 892 bytes --]

Hi Mark

On Wed, Jun 09, 2021 at 01:43:04PM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> > The IEC958 status bits can be exposed and modified by the userspace
> > through dedicated ALSA controls.
> > 
> > This patch implements those controls for the hdmi-codec driver. It
> > relies on a default value being setup at probe time that can later be
> > overridden by the control put.
> 
> This breaks bisection:
> 
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
>   memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
>                                                   ^~

Indeed, sorry. I just sent a new version of the PR with that breakage fixed

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 892 bytes --]

Hi Mark

On Wed, Jun 09, 2021 at 01:43:04PM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> > The IEC958 status bits can be exposed and modified by the userspace
> > through dedicated ALSA controls.
> > 
> > This patch implements those controls for the hdmi-codec driver. It
> > relies on a default value being setup at probe time that can later be
> > overridden by the control put.
> 
> This breaks bisection:
> 
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
>   memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
>                                                   ^~

Indeed, sorry. I just sent a new version of the PR with that breakage fixed

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 892 bytes --]

Hi Mark

On Wed, Jun 09, 2021 at 01:43:04PM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> > The IEC958 status bits can be exposed and modified by the userspace
> > through dedicated ALSA controls.
> > 
> > This patch implements those controls for the hdmi-codec driver. It
> > relies on a default value being setup at probe time that can later be
> > overridden by the control put.
> 
> This breaks bisection:
> 
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
>   memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
>                                                   ^~

Indeed, sorry. I just sent a new version of the PR with that breakage fixed

Maxime

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 04/12] ASoC: hdmi-codec: Add iec958 controls

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 892 bytes --]

Hi Mark

On Wed, Jun 09, 2021 at 01:43:04PM +0100, Mark Brown wrote:
> On Tue, May 25, 2021 at 03:23:46PM +0200, Maxime Ripard wrote:
> > The IEC958 status bits can be exposed and modified by the userspace
> > through dedicated ALSA controls.
> > 
> > This patch implements those controls for the hdmi-codec driver. It
> > relies on a default value being setup at probe time that can later be
> > overridden by the control put.
> 
> This breaks bisection:
> 
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c: In function 'hdmi_codec_hw_params':
> /mnt/kernel/sound/soc/codecs/hdmi-codec.c:504:50: error: invalid type argument of '->' (have 'struct hdmi_codec_params')
>   memcpy(hp.iec.status, hcp->iec_status, sizeof(hp->iec_status));
>                                                   ^~

Indeed, sorry. I just sent a new version of the PR with that breakage fixed

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 467 bytes --]

On Tue, Jun 01, 2021 at 11:26:24AM +0200, nicolas saenz julienne wrote:
> On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> > The hdmi-codec brings a lot of advanced features, including the HDMI
> > channel mapping. Let's use it in our driver instead of our own codec.
> > 
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > ---
> 
> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Applied 6 to 10, I'll resend 11

Thanks!
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 467 bytes --]

On Tue, Jun 01, 2021 at 11:26:24AM +0200, nicolas saenz julienne wrote:
> On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> > The hdmi-codec brings a lot of advanced features, including the HDMI
> > channel mapping. Let's use it in our driver instead of our own codec.
> > 
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > ---
> 
> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Applied 6 to 10, I'll resend 11

Thanks!
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

[-- Attachment #1.1: Type: text/plain, Size: 467 bytes --]

On Tue, Jun 01, 2021 at 11:26:24AM +0200, nicolas saenz julienne wrote:
> On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> > The hdmi-codec brings a lot of advanced features, including the HDMI
> > channel mapping. Let's use it in our driver instead of our own codec.
> > 
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > ---
> 
> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Applied 6 to 10, I'll resend 11

Thanks!
Maxime

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 10/12] drm/vc4: hdmi: Register HDMI codec

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 467 bytes --]

On Tue, Jun 01, 2021 at 11:26:24AM +0200, nicolas saenz julienne wrote:
> On Tue, 2021-05-25 at 15:23 +0200, Maxime Ripard wrote:
> > The hdmi-codec brings a lot of advanced features, including the HDMI
> > channel mapping. Let's use it in our driver instead of our own codec.
> > 
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > ---
> 
> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

Applied 6 to 10, I'll resend 11

Thanks!
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]