On 25.06.2021 15:09:26, Stephane Grosjean wrote:
> This bundle of patches allows to upgrade the old code of the device
> driver for the PCAN-USB made by PEAK-System GmbH. In particular:
> 
> - it adds support for loopback and one-shot modes when the version of the
>   embedded firmware allows it
> - it corrects the reading of error counters
> - it updates the management of bus state changes using the functions
>   exported by the can-dev module and the error counters values
> 
> Stephane Grosjean (5):
>   can: peak_usb: pcan_usb_get_device_id(): read value only in case of
>     success
>   can: peak_usb: PCAN-USB: add support of loopback and one-short mode
>   can: peak_usb: pcan_usb_handle_bus_evt(): fix reading rxerr/txerr
>     values
>   can: peak_usb: pcan_usb_encode_msg(): adds information
>   can: peak_usb: upgrades the handling of bus state changes

I've added 3 to linux-can/testing and 1,2,4 to linux-can-next/testing.
Some changes suggested to 5, you only have to resend this one.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |