[PATCH v4 0/7] updates to amd-pmc driver

[PATCH v4 0/7] updates to amd-pmc driver

[Shyam Sundar S K]

Couple of existing issues on the completion codes to SMU
and a newer way to get the s0ix statistics are introduced.

Also, add acpi ids for current and future revisions of the
pmc controller.

Shyam Sundar S K (7):
  platform/x86: amd-pmc: Fix command completion code
  platform/x86: amd-pmc: Fix SMU firmware reporting mechanism
  platform/x86: amd-pmc: call dump registers only once
  platform/x86: amd-pmc: Add support for logging SMU metrics
  amd-pmc: Add support for logging s0ix counters
  platform/x86: amd-pmc: Add support for ACPI ID AMDI0006
  platform/x86: amd-pmc: Add new acpi id for future PMC controllers

 drivers/platform/x86/amd-pmc.c | 245 ++++++++++++++++++++++++++++++---
 1 file changed, 223 insertions(+), 22 deletions(-)

-- 
2.25.1

[PATCH v4 1/7] platform/x86: amd-pmc: Fix command completion code

[Shyam Sundar S K]

The protocol to submit a job request to SMU is to wait for
AMD_PMC_REGISTER_RESPONSE to return 1,meaning SMU is ready to take
requests. PMC driver has to make sure that the response code is always
AMD_PMC_RESULT_OK before making any command submissions.

When we submit a message to SMU, we have to wait until it processes
the request. Adding a read_poll_timeout() check as this was missing in
the existing code.

Also, add a mutex to protect amd_pmc_send_cmd() calls to SMU.

Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
v2: no change
v3:
 - use mutex to protect multiple calls to SMU
 - add a switch-case to handle smu responses.
v4:
 - Handle different error codes based on smu responses.

 drivers/platform/x86/amd-pmc.c | 39 ++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index b9da58ee9b1e..e3262ed967d9 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -68,6 +68,7 @@ struct amd_pmc_dev {
 	u32 base_addr;
 	u32 cpu_id;
 	struct device *dev;
+	struct mutex lock; /* generic mutex lock */
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 	struct dentry *dbgfs_dir;
 #endif /* CONFIG_DEBUG_FS */
@@ -138,9 +139,10 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
 	u8 msg;
 	u32 val;
 
+	mutex_lock(&dev->lock);
 	/* Wait until we get a valid response */
 	rc = readx_poll_timeout(ioread32, dev->regbase + AMD_PMC_REGISTER_RESPONSE,
-				val, val > 0, PMC_MSG_DELAY_MIN_US,
+				val, val != 0, PMC_MSG_DELAY_MIN_US,
 				PMC_MSG_DELAY_MIN_US * RESPONSE_REGISTER_LOOP_MAX);
 	if (rc) {
 		dev_err(dev->dev, "failed to talk to SMU\n");
@@ -156,7 +158,38 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
 	/* Write message ID to message ID register */
 	msg = (dev->cpu_id == AMD_CPU_ID_RN) ? MSG_OS_HINT_RN : MSG_OS_HINT_PCO;
 	amd_pmc_reg_write(dev, AMD_PMC_REGISTER_MESSAGE, msg);
-	return 0;
+	/* Wait until we get a valid response */
+	rc = readx_poll_timeout(ioread32, dev->regbase + AMD_PMC_REGISTER_RESPONSE,
+				val, val != 0, PMC_MSG_DELAY_MIN_US,
+				PMC_MSG_DELAY_MIN_US * RESPONSE_REGISTER_LOOP_MAX);
+	if (rc) {
+		dev_err(dev->dev, "SMU response timed out\n");
+		rc = -ETIMEDOUT;
+		goto out_unlock;
+	}
+
+	switch (val) {
+	case AMD_PMC_RESULT_OK:
+		break;
+	case AMD_PMC_RESULT_CMD_REJECT_BUSY:
+		dev_err(dev->dev, "SMU not ready. err: 0x%x\n", val);
+		rc = -EBUSY;
+		goto out_unlock;
+	case AMD_PMC_RESULT_CMD_UNKNOWN:
+		dev_err(dev->dev, "SMU cmd unknown. err: 0x%x\n", val);
+		rc = -EINVAL;
+		goto out_unlock;
+	case AMD_PMC_RESULT_CMD_REJECT_PREREQ:
+	case AMD_PMC_RESULT_FAILED:
+	default:
+		dev_err(dev->dev, "SMU cmd failed. err: 0x%x\n", val);
+		rc = -EIO;
+		goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&dev->lock);
+	return rc;
 }
 
 static int __maybe_unused amd_pmc_suspend(struct device *dev)
@@ -259,6 +292,7 @@ static int amd_pmc_probe(struct platform_device *pdev)
 
 	amd_pmc_dump_registers(dev);
 
+	mutex_init(&dev->lock);
 	platform_set_drvdata(pdev, dev);
 	amd_pmc_dbgfs_register(dev);
 	return 0;
@@ -269,6 +303,7 @@ static int amd_pmc_remove(struct platform_device *pdev)
 	struct amd_pmc_dev *dev = platform_get_drvdata(pdev);
 
 	amd_pmc_dbgfs_unregister(dev);
+	mutex_destroy(&dev->lock);
 	return 0;
 }
 
-- 
2.25.1

[PATCH v4 2/7] platform/x86: amd-pmc: Fix SMU firmware reporting mechanism

[Shyam Sundar S K]

It was lately understood that the current mechanism available in the
driver to get SMU firmware info works only on internal SMU builds and
there is a separate way to get all the SMU logging counters (addressed
in the next patch). Hence remove all the smu info shown via debugfs as it
is no more useful.

Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
v2: split into multiple patches as suggested by Hans
v3: No change
v4: No change

 drivers/platform/x86/amd-pmc.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index e3262ed967d9..227efd7ce174 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -52,7 +52,6 @@
 #define AMD_CPU_ID_PCO			AMD_CPU_ID_RV
 #define AMD_CPU_ID_CZN			AMD_CPU_ID_RN
 
-#define AMD_SMU_FW_VERSION		0x0
 #define PMC_MSG_DELAY_MIN_US		100
 #define RESPONSE_REGISTER_LOOP_MAX	200
 
@@ -89,11 +88,6 @@ static inline void amd_pmc_reg_write(struct amd_pmc_dev *dev, int reg_offset, u3
 #ifdef CONFIG_DEBUG_FS
 static int smu_fw_info_show(struct seq_file *s, void *unused)
 {
-	struct amd_pmc_dev *dev = s->private;
-	u32 value;
-
-	value = ioread32(dev->smu_base + AMD_SMU_FW_VERSION);
-	seq_printf(s, "SMU FW Info: %x\n", value);
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(smu_fw_info);
@@ -281,10 +275,6 @@ static int amd_pmc_probe(struct platform_device *pdev)
 	pci_dev_put(rdev);
 	base_addr = ((u64)base_addr_hi << 32 | base_addr_lo);
 
-	dev->smu_base = devm_ioremap(dev->dev, base_addr, AMD_PMC_MAPPING_SIZE);
-	if (!dev->smu_base)
-		return -ENOMEM;
-
 	dev->regbase = devm_ioremap(dev->dev, base_addr + AMD_PMC_BASE_ADDR_OFFSET,
 				    AMD_PMC_MAPPING_SIZE);
 	if (!dev->regbase)
-- 
2.25.1

[PATCH v4 3/7] platform/x86: amd-pmc: call dump registers only once

[Shyam Sundar S K]

Currently amd_pmc_dump_registers() routine is being called at
multiple places. The best to call it is after command submission
to SMU.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
v2: split into multiple patches as suggested by Hans
v3: No change
v4: No change

 drivers/platform/x86/amd-pmc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index 227efd7ce174..391c071b9a85 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -183,6 +183,7 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
 
 out_unlock:
 	mutex_unlock(&dev->lock);
+	amd_pmc_dump_registers(dev);
 	return rc;
 }
 
@@ -195,7 +196,6 @@ static int __maybe_unused amd_pmc_suspend(struct device *dev)
 	if (rc)
 		dev_err(pdev->dev, "suspend failed\n");
 
-	amd_pmc_dump_registers(pdev);
 	return 0;
 }
 
@@ -208,7 +208,6 @@ static int __maybe_unused amd_pmc_resume(struct device *dev)
 	if (rc)
 		dev_err(pdev->dev, "resume failed\n");
 
-	amd_pmc_dump_registers(pdev);
 	return 0;
 }
 
@@ -280,8 +279,6 @@ static int amd_pmc_probe(struct platform_device *pdev)
 	if (!dev->regbase)
 		return -ENOMEM;
 
-	amd_pmc_dump_registers(dev);
-
 	mutex_init(&dev->lock);
 	platform_set_drvdata(pdev, dev);
 	amd_pmc_dbgfs_register(dev);
-- 
2.25.1

[PATCH v4 4/7] platform/x86: amd-pmc: Add support for logging SMU metrics

[Shyam Sundar S K]

SMU provides a way to dump the s0ix debug statistics in the form of a
metrics table via a of set special mailbox commands.

Add support to the driver which can send these commands to SMU and expose
the information received via debugfs. The information contains the s0ix
entry/exit, active time of each IP block etc.

As a side note, SMU subsystem logging is not supported on Picasso based
SoC's.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2: No change
v3: No change
v4: No change

 drivers/platform/x86/amd-pmc.c | 147 +++++++++++++++++++++++++++++++--
 1 file changed, 139 insertions(+), 8 deletions(-)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index 391c071b9a85..b9e987468752 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -46,6 +46,14 @@
 #define AMD_PMC_RESULT_CMD_UNKNOWN           0xFE
 #define AMD_PMC_RESULT_FAILED                0xFF
 
+/* SMU Message Definations */
+#define SMU_MSG_GETSMUVERSION		0x02
+#define SMU_MSG_LOG_GETDRAM_ADDR_HI	0x04
+#define SMU_MSG_LOG_GETDRAM_ADDR_LO	0x05
+#define SMU_MSG_LOG_START		0x06
+#define SMU_MSG_LOG_RESET		0x07
+#define SMU_MSG_LOG_DUMP_DATA		0x08
+#define SMU_MSG_GET_SUP_CONSTRAINTS	0x09
 /* List of supported CPU ids */
 #define AMD_CPU_ID_RV			0x15D0
 #define AMD_CPU_ID_RN			0x1630
@@ -55,17 +63,42 @@
 #define PMC_MSG_DELAY_MIN_US		100
 #define RESPONSE_REGISTER_LOOP_MAX	200
 
+#define SOC_SUBSYSTEM_IP_MAX	12
+#define DELAY_MIN_US		2000
+#define DELAY_MAX_US		3000
 enum amd_pmc_def {
 	MSG_TEST = 0x01,
 	MSG_OS_HINT_PCO,
 	MSG_OS_HINT_RN,
 };
 
+struct amd_pmc_bit_map {
+	const char *name;
+	u32 bit_mask;
+};
+
+static const struct amd_pmc_bit_map soc15_ip_blk[] = {
+	{"DISPLAY",	BIT(0)},
+	{"CPU",		BIT(1)},
+	{"GFX",		BIT(2)},
+	{"VDD",		BIT(3)},
+	{"ACP",		BIT(4)},
+	{"VCN",		BIT(5)},
+	{"ISP",		BIT(6)},
+	{"NBIO",	BIT(7)},
+	{"DF",		BIT(8)},
+	{"USB0",	BIT(9)},
+	{"USB1",	BIT(10)},
+	{"LAPIC",	BIT(11)},
+	{}
+};
+
 struct amd_pmc_dev {
 	void __iomem *regbase;
-	void __iomem *smu_base;
+	void __iomem *smu_virt_addr;
 	u32 base_addr;
 	u32 cpu_id;
+	u32 active_ips;
 	struct device *dev;
 	struct mutex lock; /* generic mutex lock */
 #if IS_ENABLED(CONFIG_DEBUG_FS)
@@ -74,6 +107,7 @@ struct amd_pmc_dev {
 };
 
 static struct amd_pmc_dev pmc;
+static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set, u32 *data, u8 msg, bool ret);
 
 static inline u32 amd_pmc_reg_read(struct amd_pmc_dev *dev, int reg_offset)
 {
@@ -85,9 +119,49 @@ static inline void amd_pmc_reg_write(struct amd_pmc_dev *dev, int reg_offset, u3
 	iowrite32(val, dev->regbase + reg_offset);
 }
 
+struct smu_metrics {
+	u32 table_version;
+	u32 hint_count;
+	u32 s0i3_cyclecount;
+	u32 timein_s0i2;
+	u64 timeentering_s0i3_lastcapture;
+	u64 timeentering_s0i3_totaltime;
+	u64 timeto_resume_to_os_lastcapture;
+	u64 timeto_resume_to_os_totaltime;
+	u64 timein_s0i3_lastcapture;
+	u64 timein_s0i3_totaltime;
+	u64 timein_swdrips_lastcapture;
+	u64 timein_swdrips_totaltime;
+	u64 timecondition_notmet_lastcapture[SOC_SUBSYSTEM_IP_MAX];
+	u64 timecondition_notmet_totaltime[SOC_SUBSYSTEM_IP_MAX];
+} __packed;
+
 #ifdef CONFIG_DEBUG_FS
 static int smu_fw_info_show(struct seq_file *s, void *unused)
 {
+	struct amd_pmc_dev *dev = s->private;
+	struct smu_metrics table;
+	int idx;
+
+	if (dev->cpu_id == AMD_CPU_ID_PCO)
+		return -EINVAL;
+
+	memcpy_fromio(&table, dev->smu_virt_addr, sizeof(struct smu_metrics));
+
+	seq_puts(s, "\n=== SMU Statistics ===\n");
+	seq_printf(s, "Table Version: %d\n", table.table_version);
+	seq_printf(s, "Hint Count: %d\n", table.hint_count);
+	seq_printf(s, "S0i3 Cycle Count: %d\n", table.s0i3_cyclecount);
+	seq_printf(s, "Time (in us) to S0i3: %lld\n", table.timeentering_s0i3_lastcapture);
+	seq_printf(s, "Time (in us) in S0i3: %lld\n", table.timein_s0i3_lastcapture);
+
+	seq_puts(s, "\n=== Active time (in us) ===\n");
+	for (idx = 0 ; idx < SOC_SUBSYSTEM_IP_MAX ; idx++) {
+		if (soc15_ip_blk[idx].bit_mask & dev->active_ips)
+			seq_printf(s, "%-8s : %lld\n", soc15_ip_blk[idx].name,
+				   table.timecondition_notmet_lastcapture[idx]);
+	}
+
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(smu_fw_info);
@@ -113,6 +187,32 @@ static inline void amd_pmc_dbgfs_unregister(struct amd_pmc_dev *dev)
 }
 #endif /* CONFIG_DEBUG_FS */
 
+static int amd_pmc_setup_smu_logging(struct amd_pmc_dev *dev)
+{
+	u32 phys_addr_low, phys_addr_hi;
+	u64 smu_phys_addr;
+
+	if (dev->cpu_id == AMD_CPU_ID_PCO)
+		return -EINVAL;
+
+	/* Get Active devices list from SMU */
+	amd_pmc_send_cmd(dev, 0, &dev->active_ips, SMU_MSG_GET_SUP_CONSTRAINTS, 1);
+
+	/* Get dram address */
+	amd_pmc_send_cmd(dev, 0, &phys_addr_low, SMU_MSG_LOG_GETDRAM_ADDR_LO, 1);
+	amd_pmc_send_cmd(dev, 0, &phys_addr_hi, SMU_MSG_LOG_GETDRAM_ADDR_HI, 1);
+	smu_phys_addr = ((u64)phys_addr_hi << 32 | phys_addr_low);
+
+	dev->smu_virt_addr = devm_ioremap(dev->dev, smu_phys_addr, sizeof(struct smu_metrics));
+	if (!dev->smu_virt_addr)
+		return -ENOMEM;
+
+	/* Start the logging */
+	amd_pmc_send_cmd(dev, 0, NULL, SMU_MSG_LOG_START, 0);
+
+	return 0;
+}
+
 static void amd_pmc_dump_registers(struct amd_pmc_dev *dev)
 {
 	u32 value;
@@ -127,10 +227,9 @@ static void amd_pmc_dump_registers(struct amd_pmc_dev *dev)
 	dev_dbg(dev->dev, "AMD_PMC_REGISTER_MESSAGE:%x\n", value);
 }
 
-static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
+static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set, u32 *data, u8 msg, bool ret)
 {
 	int rc;
-	u8 msg;
 	u32 val;
 
 	mutex_lock(&dev->lock);
@@ -150,8 +249,8 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
 	amd_pmc_reg_write(dev, AMD_PMC_REGISTER_ARGUMENT, set);
 
 	/* Write message ID to message ID register */
-	msg = (dev->cpu_id == AMD_CPU_ID_RN) ? MSG_OS_HINT_RN : MSG_OS_HINT_PCO;
 	amd_pmc_reg_write(dev, AMD_PMC_REGISTER_MESSAGE, msg);
+
 	/* Wait until we get a valid response */
 	rc = readx_poll_timeout(ioread32, dev->regbase + AMD_PMC_REGISTER_RESPONSE,
 				val, val != 0, PMC_MSG_DELAY_MIN_US,
@@ -164,6 +263,11 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
 
 	switch (val) {
 	case AMD_PMC_RESULT_OK:
+		if (ret) {
+			/* PMFW may take longer time to return back the data */
+			usleep_range(DELAY_MIN_US, 10 * DELAY_MAX_US);
+			*data = amd_pmc_reg_read(dev, AMD_PMC_REGISTER_ARGUMENT);
+		}
 		break;
 	case AMD_PMC_RESULT_CMD_REJECT_BUSY:
 		dev_err(dev->dev, "SMU not ready. err: 0x%x\n", val);
@@ -187,12 +291,29 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
 	return rc;
 }
 
+static int amd_pmc_get_os_hint(struct amd_pmc_dev *dev)
+{
+	switch (dev->cpu_id) {
+	case AMD_CPU_ID_PCO:
+		return MSG_OS_HINT_PCO;
+	case AMD_CPU_ID_RN:
+		return MSG_OS_HINT_RN;
+	}
+	return -EINVAL;
+}
+
 static int __maybe_unused amd_pmc_suspend(struct device *dev)
 {
 	struct amd_pmc_dev *pdev = dev_get_drvdata(dev);
 	int rc;
+	u8 msg;
 
-	rc = amd_pmc_send_cmd(pdev, 1);
+	/* Reset and Start SMU logging - to monitor the s0i3 stats */
+	amd_pmc_send_cmd(pdev, 0, NULL, SMU_MSG_LOG_RESET, 0);
+	amd_pmc_send_cmd(pdev, 0, NULL, SMU_MSG_LOG_START, 0);
+
+	msg = amd_pmc_get_os_hint(pdev);
+	rc = amd_pmc_send_cmd(pdev, 1, NULL, msg, 0);
 	if (rc)
 		dev_err(pdev->dev, "suspend failed\n");
 
@@ -203,8 +324,13 @@ static int __maybe_unused amd_pmc_resume(struct device *dev)
 {
 	struct amd_pmc_dev *pdev = dev_get_drvdata(dev);
 	int rc;
+	u8 msg;
 
-	rc = amd_pmc_send_cmd(pdev, 0);
+	/* Let SMU know that we are looking for stats */
+	amd_pmc_send_cmd(pdev, 0, NULL, SMU_MSG_LOG_DUMP_DATA, 0);
+
+	msg = amd_pmc_get_os_hint(pdev);
+	rc = amd_pmc_send_cmd(pdev, 0, NULL, msg, 0);
 	if (rc)
 		dev_err(pdev->dev, "resume failed\n");
 
@@ -227,8 +353,7 @@ static int amd_pmc_probe(struct platform_device *pdev)
 {
 	struct amd_pmc_dev *dev = &pmc;
 	struct pci_dev *rdev;
-	u32 base_addr_lo;
-	u32 base_addr_hi;
+	u32 base_addr_lo, base_addr_hi;
 	u64 base_addr;
 	int err;
 	u32 val;
@@ -280,6 +405,12 @@ static int amd_pmc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	mutex_init(&dev->lock);
+
+	/* Use SMU to get the s0i3 debug stats */
+	err = amd_pmc_setup_smu_logging(dev);
+	if (err)
+		dev_err(dev->dev, "SMU debugging info not supported on this platform\n");
+
 	platform_set_drvdata(pdev, dev);
 	amd_pmc_dbgfs_register(dev);
 	return 0;
-- 
2.25.1

[PATCH v4 5/7] amd-pmc: Add support for logging s0ix counters

[Shyam Sundar S K]

Even the FCH SSC registers provides certain level of information
about the s0ix entry and exit times which comes handy when the SMU
fails to report the statistics via the mailbox communication.

This information is captured via a new debugfs file "s0ix_stats".
A non-zero entry in this counters would mean that the system entered
the s0ix state.

If s0ix entry time and exit time don't change during suspend to idle,
the silicon has not entered the deepest state.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2: No change
v3: No change
v4: No change

 drivers/platform/x86/amd-pmc.c | 45 +++++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index b9e987468752..65dc4753b1d4 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -46,6 +46,15 @@
 #define AMD_PMC_RESULT_CMD_UNKNOWN           0xFE
 #define AMD_PMC_RESULT_FAILED                0xFF
 
+/* FCH SSC Registers */
+#define FCH_S0I3_ENTRY_TIME_L_OFFSET	0x30
+#define FCH_S0I3_ENTRY_TIME_H_OFFSET	0x34
+#define FCH_S0I3_EXIT_TIME_L_OFFSET	0x38
+#define FCH_S0I3_EXIT_TIME_H_OFFSET	0x3C
+#define FCH_SSC_MAPPING_SIZE		0x800
+#define FCH_BASE_PHY_ADDR_LOW		0xFED81100
+#define FCH_BASE_PHY_ADDR_HIGH		0x00000000
+
 /* SMU Message Definations */
 #define SMU_MSG_GETSMUVERSION		0x02
 #define SMU_MSG_LOG_GETDRAM_ADDR_HI	0x04
@@ -96,6 +105,7 @@ static const struct amd_pmc_bit_map soc15_ip_blk[] = {
 struct amd_pmc_dev {
 	void __iomem *regbase;
 	void __iomem *smu_virt_addr;
+	void __iomem *fch_virt_addr;
 	u32 base_addr;
 	u32 cpu_id;
 	u32 active_ips;
@@ -166,6 +176,29 @@ static int smu_fw_info_show(struct seq_file *s, void *unused)
 }
 DEFINE_SHOW_ATTRIBUTE(smu_fw_info);
 
+static int s0ix_stats_show(struct seq_file *s, void *unused)
+{
+	struct amd_pmc_dev *dev = s->private;
+	u64 entry_time, exit_time, residency;
+
+	entry_time = ioread32(dev->fch_virt_addr + FCH_S0I3_ENTRY_TIME_H_OFFSET);
+	entry_time = entry_time << 32 | ioread32(dev->fch_virt_addr + FCH_S0I3_ENTRY_TIME_L_OFFSET);
+
+	exit_time = ioread32(dev->fch_virt_addr + FCH_S0I3_EXIT_TIME_H_OFFSET);
+	exit_time = exit_time << 32 | ioread32(dev->fch_virt_addr + FCH_S0I3_EXIT_TIME_L_OFFSET);
+
+	/* It's in 48MHz. We need to convert it */
+	residency = (exit_time - entry_time) / 48;
+
+	seq_puts(s, "=== S0ix statistics ===\n");
+	seq_printf(s, "S0ix Entry Time: %lld\n", entry_time);
+	seq_printf(s, "S0ix Exit Time: %lld\n", exit_time);
+	seq_printf(s, "Residency Time: %lld\n", residency);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(s0ix_stats);
+
 static void amd_pmc_dbgfs_unregister(struct amd_pmc_dev *dev)
 {
 	debugfs_remove_recursive(dev->dbgfs_dir);
@@ -176,6 +209,8 @@ static void amd_pmc_dbgfs_register(struct amd_pmc_dev *dev)
 	dev->dbgfs_dir = debugfs_create_dir("amd_pmc", NULL);
 	debugfs_create_file("smu_fw_info", 0644, dev->dbgfs_dir, dev,
 			    &smu_fw_info_fops);
+	debugfs_create_file("s0ix_stats", 0644, dev->dbgfs_dir, dev,
+			    &s0ix_stats_fops);
 }
 #else
 static inline void amd_pmc_dbgfs_register(struct amd_pmc_dev *dev)
@@ -354,7 +389,7 @@ static int amd_pmc_probe(struct platform_device *pdev)
 	struct amd_pmc_dev *dev = &pmc;
 	struct pci_dev *rdev;
 	u32 base_addr_lo, base_addr_hi;
-	u64 base_addr;
+	u64 base_addr, fch_phys_addr;
 	int err;
 	u32 val;
 
@@ -406,6 +441,14 @@ static int amd_pmc_probe(struct platform_device *pdev)
 
 	mutex_init(&dev->lock);
 
+	/* Use FCH registers to get the S0ix stats */
+	base_addr_lo = FCH_BASE_PHY_ADDR_LOW;
+	base_addr_hi = FCH_BASE_PHY_ADDR_HIGH;
+	fch_phys_addr = ((u64)base_addr_hi << 32 | base_addr_lo);
+	dev->fch_virt_addr = devm_ioremap(dev->dev, fch_phys_addr, FCH_SSC_MAPPING_SIZE);
+	if (!dev->fch_virt_addr)
+		return -ENOMEM;
+
 	/* Use SMU to get the s0i3 debug stats */
 	err = amd_pmc_setup_smu_logging(dev);
 	if (err)
-- 
2.25.1

[PATCH v4 6/7] platform/x86: amd-pmc: Add support for ACPI ID AMDI0006

[Shyam Sundar S K]

Some newer BIOSes have added another ACPI ID for the uPEP device.
SMU statistics behave identically on this device.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2: No change
v3: No change
v4: No change

 drivers/platform/x86/amd-pmc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index 65dc4753b1d4..901f2212bd39 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -470,6 +470,7 @@ static int amd_pmc_remove(struct platform_device *pdev)
 
 static const struct acpi_device_id amd_pmc_acpi_ids[] = {
 	{"AMDI0005", 0},
+	{"AMDI0006", 0},
 	{"AMD0004", 0},
 	{ }
 };
-- 
2.25.1

[PATCH v4 7/7] platform/x86: amd-pmc: Add new acpi id for future PMC controllers

[Shyam Sundar S K]

The upcoming PMC controller would have a newer acpi id, add that to
the supported acpid device list.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
v2: No change
v3: No change
v4: No change

 drivers/platform/x86/amd-pmc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index 901f2212bd39..2761e1398b03 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -68,6 +68,7 @@
 #define AMD_CPU_ID_RN			0x1630
 #define AMD_CPU_ID_PCO			AMD_CPU_ID_RV
 #define AMD_CPU_ID_CZN			AMD_CPU_ID_RN
+#define AMD_CPU_ID_YC			0x14B5
 
 #define PMC_MSG_DELAY_MIN_US		100
 #define RESPONSE_REGISTER_LOOP_MAX	200
@@ -332,6 +333,7 @@ static int amd_pmc_get_os_hint(struct amd_pmc_dev *dev)
 	case AMD_CPU_ID_PCO:
 		return MSG_OS_HINT_PCO;
 	case AMD_CPU_ID_RN:
+	case AMD_CPU_ID_YC:
 		return MSG_OS_HINT_RN;
 	}
 	return -EINVAL;
@@ -377,6 +379,7 @@ static const struct dev_pm_ops amd_pmc_pm_ops = {
 };
 
 static const struct pci_device_id pmc_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_YC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_CZN) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_RN) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, AMD_CPU_ID_PCO) },
@@ -471,6 +474,7 @@ static int amd_pmc_remove(struct platform_device *pdev)
 static const struct acpi_device_id amd_pmc_acpi_ids[] = {
 	{"AMDI0005", 0},
 	{"AMDI0006", 0},
+	{"AMDI0007", 0},
 	{"AMD0004", 0},
 	{ }
 };
-- 
2.25.1

Re: [PATCH v4 1/7] platform/x86: amd-pmc: Fix command completion code

[Raul Rangel]

On Mon, Jun 28, 2021 at 12:04 PM Shyam Sundar S K
<Shyam-sundar.S-k@amd.com> wrote:
>
> The protocol to submit a job request to SMU is to wait for
> AMD_PMC_REGISTER_RESPONSE to return 1,meaning SMU is ready to take
> requests. PMC driver has to make sure that the response code is always
> AMD_PMC_RESULT_OK before making any command submissions.
>
> When we submit a message to SMU, we have to wait until it processes
> the request. Adding a read_poll_timeout() check as this was missing in
> the existing code.
>
> Also, add a mutex to protect amd_pmc_send_cmd() calls to SMU.
>
> Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
> v2: no change
> v3:
>  - use mutex to protect multiple calls to SMU
>  - add a switch-case to handle smu responses.
> v4:
>  - Handle different error codes based on smu responses.
>
>  drivers/platform/x86/amd-pmc.c | 39 ++++++++++++++++++++++++++++++++--
>  1 file changed, 37 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
> index b9da58ee9b1e..e3262ed967d9 100644
> --- a/drivers/platform/x86/amd-pmc.c
> +++ b/drivers/platform/x86/amd-pmc.c
> @@ -68,6 +68,7 @@ struct amd_pmc_dev {
>         u32 base_addr;
>         u32 cpu_id;
>         struct device *dev;
> +       struct mutex lock; /* generic mutex lock */
>  #if IS_ENABLED(CONFIG_DEBUG_FS)
>         struct dentry *dbgfs_dir;
>  #endif /* CONFIG_DEBUG_FS */
> @@ -138,9 +139,10 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
>         u8 msg;
>         u32 val;
>
> +       mutex_lock(&dev->lock);
>         /* Wait until we get a valid response */
>         rc = readx_poll_timeout(ioread32, dev->regbase + AMD_PMC_REGISTER_RESPONSE,
> -                               val, val > 0, PMC_MSG_DELAY_MIN_US,
> +                               val, val != 0, PMC_MSG_DELAY_MIN_US,
>                                 PMC_MSG_DELAY_MIN_US * RESPONSE_REGISTER_LOOP_MAX);
>         if (rc) {
>                 dev_err(dev->dev, "failed to talk to SMU\n");
> @@ -156,7 +158,38 @@ static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, bool set)
>         /* Write message ID to message ID register */
>         msg = (dev->cpu_id == AMD_CPU_ID_RN) ? MSG_OS_HINT_RN : MSG_OS_HINT_PCO;
>         amd_pmc_reg_write(dev, AMD_PMC_REGISTER_MESSAGE, msg);
> -       return 0;
> +       /* Wait until we get a valid response */
> +       rc = readx_poll_timeout(ioread32, dev->regbase + AMD_PMC_REGISTER_RESPONSE,
> +                               val, val != 0, PMC_MSG_DELAY_MIN_US,
> +                               PMC_MSG_DELAY_MIN_US * RESPONSE_REGISTER_LOOP_MAX);
> +       if (rc) {
> +               dev_err(dev->dev, "SMU response timed out\n");
> +               rc = -ETIMEDOUT;
readx_poll_timeout will return `-ETIMEDOUT`, so no need to override the rc.

> +               goto out_unlock;
> +       }
> +
> +       switch (val) {
> +       case AMD_PMC_RESULT_OK:
> +               break;
> +       case AMD_PMC_RESULT_CMD_REJECT_BUSY:
> +               dev_err(dev->dev, "SMU not ready. err: 0x%x\n", val);
> +               rc = -EBUSY;
> +               goto out_unlock;
> +       case AMD_PMC_RESULT_CMD_UNKNOWN:
> +               dev_err(dev->dev, "SMU cmd unknown. err: 0x%x\n", val);
> +               rc = -EINVAL;
> +               goto out_unlock;
> +       case AMD_PMC_RESULT_CMD_REJECT_PREREQ:
> +       case AMD_PMC_RESULT_FAILED:
> +       default:
> +               dev_err(dev->dev, "SMU cmd failed. err: 0x%x\n", val);
> +               rc = -EIO;
> +               goto out_unlock;
> +       }
> +
> +out_unlock:
> +       mutex_unlock(&dev->lock);
> +       return rc;
>  }
>
>  static int __maybe_unused amd_pmc_suspend(struct device *dev)
> @@ -259,6 +292,7 @@ static int amd_pmc_probe(struct platform_device *pdev)
>
>         amd_pmc_dump_registers(dev);
>
> +       mutex_init(&dev->lock);
>         platform_set_drvdata(pdev, dev);
>         amd_pmc_dbgfs_register(dev);
>         return 0;
> @@ -269,6 +303,7 @@ static int amd_pmc_remove(struct platform_device *pdev)
>         struct amd_pmc_dev *dev = platform_get_drvdata(pdev);
>
>         amd_pmc_dbgfs_unregister(dev);
> +       mutex_destroy(&dev->lock);
>         return 0;
>  }
>
> --
> 2.25.1
>

With that minor change,
Acked-by: Raul E Rangel <rrangel@chromium.org>