[PATCH 1/3] drm/amd/pm: Simplify managed I2C transfer of Aldebaran

* [PATCH 1/3] drm/amd/pm: Simplify managed I2C transfer of Aldebaran
@ 2021-06-28 18:48 Luben Tuikov
  2021-06-28 18:48 ` [PATCH 2/3] drm/amd/pm: Fix I2C controller port setting of Arcturus Luben Tuikov
  2021-06-28 18:48 ` [PATCH 3/3] drm/amd/pm: Fix I2C controller port setting of Navi10 Luben Tuikov
  0 siblings, 2 replies; 4+ messages in thread
From: Luben Tuikov @ 2021-06-28 18:48 UTC (permalink / raw)
  To: amd-gfx
  Cc: Andrey Grodzovsky, Lijo Lazar, Luben Tuikov, Alexander Deucher,
	John Clements, Hawking Zhang

Simplify Aldebaran managed I2C transfer function
to correctly play with the upper I2C layers.

This gets it in line with Navi10, Acturus, and
Sienna Cichlid.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
---
 .../drm/amd/pm/swsmu/smu13/aldebaran_ppt.c    | 230 +++++-------------
 1 file changed, 55 insertions(+), 175 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index 9316a726195cc0..f30edf862b86d1 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -1425,197 +1425,77 @@ static bool aldebaran_is_dpm_running(struct smu_context *smu)
 	return !!(feature_enabled & SMC_DPM_FEATURE);
 }
 
-static void aldebaran_fill_i2c_req(SwI2cRequest_t  *req, bool write,
-				  uint8_t address, uint32_t numbytes,
-				  uint8_t *data)
-{
-	int i;
-
-	req->I2CcontrollerPort = 0;
-	req->I2CSpeed = 2;
-	req->SlaveAddress = address;
-	req->NumCmds = numbytes;
-
-	for (i = 0; i < numbytes; i++) {
-		SwI2cCmd_t *cmd =  &req->SwI2cCmds[i];
-
-		/* First 2 bytes are always write for lower 2b EEPROM address */
-		if (i < 2)
-			cmd->CmdConfig = CMDCONFIG_READWRITE_MASK;
-		else
-			cmd->CmdConfig = write ? CMDCONFIG_READWRITE_MASK : 0;
-
-
-		/* Add RESTART for read  after address filled */
-		cmd->CmdConfig |= (i == 2 && !write) ? CMDCONFIG_RESTART_MASK : 0;
-
-		/* Add STOP in the end */
-		cmd->CmdConfig |= (i == (numbytes - 1)) ? CMDCONFIG_STOP_MASK : 0;
-
-		/* Fill with data regardless if read or write to simplify code */
-		cmd->ReadWriteData = data[i];
-	}
-}
-
-static int aldebaran_i2c_read_data(struct i2c_adapter *control,
-					       uint8_t address,
-					       uint8_t *data,
-					       uint32_t numbytes)
+static int aldebaran_i2c_xfer(struct i2c_adapter *i2c_adap,
+			      struct i2c_msg *msg, int num_msgs)
 {
-	uint32_t  i, ret = 0;
-	SwI2cRequest_t req;
-	struct amdgpu_device *adev = to_amdgpu_device(control);
+	struct amdgpu_device *adev = to_amdgpu_device(i2c_adap);
 	struct smu_table_context *smu_table = &adev->smu.smu_table;
 	struct smu_table *table = &smu_table->driver_table;
+	SwI2cRequest_t *req, *res = (SwI2cRequest_t *)table->cpu_addr;
+	int i, j, r, c;
+	u16 dir;
 
-	if (numbytes > MAX_SW_I2C_COMMANDS) {
-		dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
-			numbytes, MAX_SW_I2C_COMMANDS);
-		return -EINVAL;
-	}
-
-	memset(&req, 0, sizeof(req));
-	aldebaran_fill_i2c_req(&req, false, address, numbytes, data);
-
-	mutex_lock(&adev->smu.mutex);
-	/* Now read data starting with that address */
-	ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req,
-					true);
-	mutex_unlock(&adev->smu.mutex);
-
-	if (!ret) {
-		SwI2cRequest_t *res = (SwI2cRequest_t *)table->cpu_addr;
-
-		/* Assume SMU  fills res.SwI2cCmds[i].Data with read bytes */
-		for (i = 0; i < numbytes; i++)
-			data[i] = res->SwI2cCmds[i].ReadWriteData;
-
-		dev_dbg(adev->dev, "aldebaran_i2c_read_data, address = %x, bytes = %d, data :",
-				  (uint16_t)address, numbytes);
-
-		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
-			       8, 1, data, numbytes, false);
-	} else
-		dev_err(adev->dev, "aldebaran_i2c_read_data - error occurred :%x", ret);
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
 
-	return ret;
-}
+	req->I2CcontrollerPort = 0;
+	req->I2CSpeed = I2C_SPEED_FAST_400K;
+	req->SlaveAddress = msg[0].addr << 1; /* wants an 8-bit address */
+	dir = msg[0].flags & I2C_M_RD;
+
+	for (c = i = 0; i < num_msgs; i++) {
+		for (j = 0; j < msg[i].len; j++, c++) {
+			SwI2cCmd_t *cmd = &req->SwI2cCmds[c];
+
+			if (!(msg[i].flags & I2C_M_RD)) {
+				/* write */
+				cmd->CmdConfig |= CMDCONFIG_READWRITE_MASK;
+				cmd->ReadWriteData = msg[i].buf[j];
+			}
 
-static int aldebaran_i2c_write_data(struct i2c_adapter *control,
-						uint8_t address,
-						uint8_t *data,
-						uint32_t numbytes)
-{
-	uint32_t ret;
-	SwI2cRequest_t req;
-	struct amdgpu_device *adev = to_amdgpu_device(control);
+			if ((dir ^ msg[i].flags) & I2C_M_RD) {
+				/* The direction changes.
+				 */
+				dir = msg[i].flags & I2C_M_RD;
+				cmd->CmdConfig |= CMDCONFIG_RESTART_MASK;
+			}
 
-	if (numbytes > MAX_SW_I2C_COMMANDS) {
-		dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
-			numbytes, MAX_SW_I2C_COMMANDS);
-		return -EINVAL;
+			req->NumCmds++;
+
+			/*
+			 * Insert STOP if we are at the last byte of either last
+			 * message for the transaction or the client explicitly
+			 * requires a STOP at this particular message.
+			 */
+			if ((j == msg[i].len - 1) &&
+			    ((i == num_msgs - 1) || (msg[i].flags & I2C_M_STOP))) {
+				cmd->CmdConfig &= ~CMDCONFIG_RESTART_MASK;
+				cmd->CmdConfig |= CMDCONFIG_STOP_MASK;
+			}
+		}
 	}
-
-	memset(&req, 0, sizeof(req));
-	aldebaran_fill_i2c_req(&req, true, address, numbytes, data);
-
 	mutex_lock(&adev->smu.mutex);
-	ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req, true);
+	r = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, req, true);
 	mutex_unlock(&adev->smu.mutex);
+	if (r)
+		goto fail;
 
-	if (!ret) {
-		dev_dbg(adev->dev, "aldebaran_i2c_write(), address = %x, bytes = %d , data: ",
-					 (uint16_t)address, numbytes);
-
-		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
-			       8, 1, data, numbytes, false);
-		/*
-		 * According to EEPROM spec there is a MAX of 10 ms required for
-		 * EEPROM to flush internal RX buffer after STOP was issued at the
-		 * end of write transaction. During this time the EEPROM will not be
-		 * responsive to any more commands - so wait a bit more.
-		 */
-		msleep(10);
-
-	} else
-		dev_err(adev->dev, "aldebaran_i2c_write- error occurred :%x", ret);
-
-	return ret;
-}
-
-static int aldebaran_i2c_xfer(struct i2c_adapter *i2c_adap,
-			      struct i2c_msg *msgs, int num)
-{
-	uint32_t  i, j, ret, data_size, data_chunk_size, next_eeprom_addr = 0;
-	uint8_t *data_ptr, data_chunk[MAX_SW_I2C_COMMANDS] = { 0 };
-
-	for (i = 0; i < num; i++) {
-		/*
-		 * SMU interface allows at most MAX_SW_I2C_COMMANDS bytes of data at
-		 * once and hence the data needs to be spliced into chunks and sent each
-		 * chunk separately
-		 */
-		data_size = msgs[i].len - 2;
-		data_chunk_size = MAX_SW_I2C_COMMANDS - 2;
-		next_eeprom_addr = (msgs[i].buf[0] << 8 & 0xff00) | (msgs[i].buf[1] & 0xff);
-		data_ptr = msgs[i].buf + 2;
-
-		for (j = 0; j < data_size / data_chunk_size; j++) {
-			/* Insert the EEPROM dest addess, bits 0-15 */
-			data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
-			data_chunk[1] = (next_eeprom_addr & 0xff);
-
-			if (msgs[i].flags & I2C_M_RD) {
-				ret = aldebaran_i2c_read_data(i2c_adap,
-							     (uint8_t)msgs[i].addr,
-							     data_chunk, MAX_SW_I2C_COMMANDS);
-
-				memcpy(data_ptr, data_chunk + 2, data_chunk_size);
-			} else {
-
-				memcpy(data_chunk + 2, data_ptr, data_chunk_size);
-
-				ret = aldebaran_i2c_write_data(i2c_adap,
-							      (uint8_t)msgs[i].addr,
-							      data_chunk, MAX_SW_I2C_COMMANDS);
-			}
-
-			if (ret) {
-				num = -EIO;
-				goto fail;
-			}
-
-			next_eeprom_addr += data_chunk_size;
-			data_ptr += data_chunk_size;
+	for (c = i = 0; i < num_msgs; i++) {
+		if (!(msg[i].flags & I2C_M_RD)) {
+			c += msg[i].len;
+			continue;
 		}
+		for (j = 0; j < msg[i].len; j++, c++) {
+			SwI2cCmd_t *cmd = &res->SwI2cCmds[c];
 
-		if (data_size % data_chunk_size) {
-			data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
-			data_chunk[1] = (next_eeprom_addr & 0xff);
-
-			if (msgs[i].flags & I2C_M_RD) {
-				ret = aldebaran_i2c_read_data(i2c_adap,
-							     (uint8_t)msgs[i].addr,
-							     data_chunk, (data_size % data_chunk_size) + 2);
-
-				memcpy(data_ptr, data_chunk + 2, data_size % data_chunk_size);
-			} else {
-				memcpy(data_chunk + 2, data_ptr, data_size % data_chunk_size);
-
-				ret = aldebaran_i2c_write_data(i2c_adap,
-							      (uint8_t)msgs[i].addr,
-							      data_chunk, (data_size % data_chunk_size) + 2);
-			}
-
-			if (ret) {
-				num = -EIO;
-				goto fail;
-			}
+			msg[i].buf[j] = cmd->ReadWriteData;
 		}
 	}
-
+	r = num_msgs;
 fail:
-	return num;
+	kfree(req);
+	return r;
 }
 
 static u32 aldebaran_i2c_func(struct i2c_adapter *adap)
-- 
2.32.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

^ permalink raw reply related	[flat|nested] 4+ messages in thread