* [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1
@ 2021-07-02 1:43 ` Bin Meng
0 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-02 1:43 UTC (permalink / raw)
To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv
Cc: Bin Meng
From: Bin Meng <bin.meng@windriver.com>
Per the DT spec, 'local-mac-address' is used to specify MAC address
that was assigned to the network device, while 'mac-address' is used
to specify the MAC address that was last used by the boot program,
and shall be used only if the value differs from 'local-mac-address'
property value.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
---
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index 0659068b62f7..a9c558366d61 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -317,7 +317,7 @@ emac1: ethernet@20112000 {
reg = <0x0 0x20112000 0x0 0x2000>;
interrupt-parent = <&plic>;
interrupts = <70 71 72 73>;
- mac-address = [00 00 00 00 00 00];
+ local-mac-address = [00 00 00 00 00 00];
clocks = <&clkcfg 5>, <&clkcfg 2>;
status = "disabled";
clock-names = "pclk", "hclk";
--
2.25.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1
@ 2021-07-02 1:43 ` Bin Meng
0 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-02 1:43 UTC (permalink / raw)
To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv
Cc: Bin Meng
From: Bin Meng <bin.meng@windriver.com>
Per the DT spec, 'local-mac-address' is used to specify MAC address
that was assigned to the network device, while 'mac-address' is used
to specify the MAC address that was last used by the boot program,
and shall be used only if the value differs from 'local-mac-address'
property value.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
---
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index 0659068b62f7..a9c558366d61 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -317,7 +317,7 @@ emac1: ethernet@20112000 {
reg = <0x0 0x20112000 0x0 0x2000>;
interrupt-parent = <&plic>;
interrupts = <70 71 72 73>;
- mac-address = [00 00 00 00 00 00];
+ local-mac-address = [00 00 00 00 00 00];
clocks = <&clkcfg 5>, <&clkcfg 2>;
status = "disabled";
clock-names = "pclk", "hclk";
--
2.25.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-07-02 1:43 ` Bin Meng
@ 2021-07-02 1:43 ` Bin Meng
-1 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-02 1:43 UTC (permalink / raw)
To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv
Cc: Bin Meng
From: Bin Meng <bin.meng@windriver.com>
U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.
Note on the Icicle Kit board, currently only emac1 is enabled so it
becomes the 'ethernet0'.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
---
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index a9c558366d61..16cc6573107b 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -9,6 +9,10 @@ / {
model = "Microchip MPFS Icicle Kit";
compatible = "microchip,mpfs-icicle-kit";
+ aliases {
+ ethernet0 = &emac1;
+ };
+
chosen {
};
--
2.25.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-07-02 1:43 ` Bin Meng
0 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-02 1:43 UTC (permalink / raw)
To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv
Cc: Bin Meng
From: Bin Meng <bin.meng@windriver.com>
U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.
Note on the Icicle Kit board, currently only emac1 is enabled so it
becomes the 'ethernet0'.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
---
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index a9c558366d61..16cc6573107b 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -9,6 +9,10 @@ / {
model = "Microchip MPFS Icicle Kit";
compatible = "microchip,mpfs-icicle-kit";
+ aliases {
+ ethernet0 = &emac1;
+ };
+
chosen {
};
--
2.25.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1
2021-07-02 1:43 ` Bin Meng
@ 2021-07-08 13:40 ` Bin Meng
-1 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-08 13:40 UTC (permalink / raw)
To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv
Cc: Bin Meng
On Fri, Jul 2, 2021 at 9:42 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> Per the DT spec, 'local-mac-address' is used to specify MAC address
> that was assigned to the network device, while 'mac-address' is used
> to specify the MAC address that was last used by the boot program,
> and shall be used only if the value differs from 'local-mac-address'
> property value.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>
> ---
>
> arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Ping?
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1
@ 2021-07-08 13:40 ` Bin Meng
0 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-08 13:40 UTC (permalink / raw)
To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv
Cc: Bin Meng
On Fri, Jul 2, 2021 at 9:42 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> Per the DT spec, 'local-mac-address' is used to specify MAC address
> that was assigned to the network device, while 'mac-address' is used
> to specify the MAC address that was last used by the boot program,
> and shall be used only if the value differs from 'local-mac-address'
> property value.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>
> ---
>
> arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Ping?
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1
2021-07-08 13:40 ` Bin Meng
@ 2021-07-09 9:20 ` Conor.Dooley
-1 siblings, 0 replies; 22+ messages in thread
From: Conor.Dooley @ 2021-07-09 9:20 UTC (permalink / raw)
To: bmeng.cn, palmer, Lewis.Hanly, atish.patra, linux-kernel, linux-riscv
Cc: bin.meng
On 08/07/2021 14:40, Bin Meng wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On Fri, Jul 2, 2021 at 9:42 AM Bin Meng<bmeng.cn@gmail.com> wrote:
>> From: Bin Meng<bin.meng@windriver.com>
>>
>> Per the DT spec, 'local-mac-address' is used to specify MAC address
>> that was assigned to the network device, while 'mac-address' is used
>> to specify the MAC address that was last used by the boot program,
>> and shall be used only if the value differs from 'local-mac-address'
>> property value.
>>
>> Signed-off-by: Bin Meng<bin.meng@windriver.com>
>> ---
>>
>> arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
> Ping?
Yeah, thats fine.
Reviewed-by: conor dooley <conor.dooley@microchip.com>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1
@ 2021-07-09 9:20 ` Conor.Dooley
0 siblings, 0 replies; 22+ messages in thread
From: Conor.Dooley @ 2021-07-09 9:20 UTC (permalink / raw)
To: bmeng.cn, palmer, Lewis.Hanly, atish.patra, linux-kernel, linux-riscv
Cc: bin.meng
On 08/07/2021 14:40, Bin Meng wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On Fri, Jul 2, 2021 at 9:42 AM Bin Meng<bmeng.cn@gmail.com> wrote:
>> From: Bin Meng<bin.meng@windriver.com>
>>
>> Per the DT spec, 'local-mac-address' is used to specify MAC address
>> that was assigned to the network device, while 'mac-address' is used
>> to specify the MAC address that was last used by the boot program,
>> and shall be used only if the value differs from 'local-mac-address'
>> property value.
>>
>> Signed-off-by: Bin Meng<bin.meng@windriver.com>
>> ---
>>
>> arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
> Ping?
Yeah, thats fine.
Reviewed-by: conor dooley <conor.dooley@microchip.com>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-07-02 1:43 ` Bin Meng
@ 2021-07-09 10:06 ` Conor.Dooley
-1 siblings, 0 replies; 22+ messages in thread
From: Conor.Dooley @ 2021-07-09 10:06 UTC (permalink / raw)
To: bmeng.cn, palmer, Lewis.Hanly, atish.patra, linux-kernel, linux-riscv
Cc: bin.meng
On 02/07/2021 02:43, Bin Meng wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> From: Bin Meng <bin.meng@windriver.com>
>
> U-Boot expects this alias to be in place in order to fix up the mac
> address of the ethernet node.
>
> Note on the Icicle Kit board, currently only emac1 is enabled so it
> becomes the 'ethernet0'.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>
> ---
>
> arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> index a9c558366d61..16cc6573107b 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -9,6 +9,10 @@ / {
> model = "Microchip MPFS Icicle Kit";
> compatible = "microchip,mpfs-icicle-kit";
>
> + aliases {
> + ethernet0 = &emac1;
> + };
> +
> chosen {
> };
Sure.
Reviewed-by: conor dooley<conor.dooley@microchip.com>
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-07-09 10:06 ` Conor.Dooley
0 siblings, 0 replies; 22+ messages in thread
From: Conor.Dooley @ 2021-07-09 10:06 UTC (permalink / raw)
To: bmeng.cn, palmer, Lewis.Hanly, atish.patra, linux-kernel, linux-riscv
Cc: bin.meng
On 02/07/2021 02:43, Bin Meng wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> From: Bin Meng <bin.meng@windriver.com>
>
> U-Boot expects this alias to be in place in order to fix up the mac
> address of the ethernet node.
>
> Note on the Icicle Kit board, currently only emac1 is enabled so it
> becomes the 'ethernet0'.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>
> ---
>
> arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> index a9c558366d61..16cc6573107b 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -9,6 +9,10 @@ / {
> model = "Microchip MPFS Icicle Kit";
> compatible = "microchip,mpfs-icicle-kit";
>
> + aliases {
> + ethernet0 = &emac1;
> + };
> +
> chosen {
> };
Sure.
Reviewed-by: conor dooley<conor.dooley@microchip.com>
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-07-02 1:43 ` Bin Meng
@ 2021-07-16 9:23 ` Geert Uytterhoeven
-1 siblings, 0 replies; 22+ messages in thread
From: Geert Uytterhoeven @ 2021-07-16 9:23 UTC (permalink / raw)
To: Bin Meng
Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra,
Linux Kernel Mailing List, linux-riscv, Bin Meng
Hi Bing,
On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> From: Bin Meng <bin.meng@windriver.com>
>
> U-Boot expects this alias to be in place in order to fix up the mac
> address of the ethernet node.
>
> Note on the Icicle Kit board, currently only emac1 is enabled so it
> becomes the 'ethernet0'.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>
Thanks for your patch!
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -9,6 +9,10 @@ / {
> model = "Microchip MPFS Icicle Kit";
> compatible = "microchip,mpfs-icicle-kit";
>
> + aliases {
> + ethernet0 = &emac1;
> + };
> +
> chosen {
> };
This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
instead.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-07-16 9:23 ` Geert Uytterhoeven
0 siblings, 0 replies; 22+ messages in thread
From: Geert Uytterhoeven @ 2021-07-16 9:23 UTC (permalink / raw)
To: Bin Meng
Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra,
Linux Kernel Mailing List, linux-riscv, Bin Meng
Hi Bing,
On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> From: Bin Meng <bin.meng@windriver.com>
>
> U-Boot expects this alias to be in place in order to fix up the mac
> address of the ethernet node.
>
> Note on the Icicle Kit board, currently only emac1 is enabled so it
> becomes the 'ethernet0'.
>
> Signed-off-by: Bin Meng <bin.meng@windriver.com>
Thanks for your patch!
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -9,6 +9,10 @@ / {
> model = "Microchip MPFS Icicle Kit";
> compatible = "microchip,mpfs-icicle-kit";
>
> + aliases {
> + ethernet0 = &emac1;
> + };
> +
> chosen {
> };
This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
instead.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-07-16 9:23 ` Geert Uytterhoeven
@ 2021-07-16 10:14 ` Bin Meng
-1 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-16 10:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra,
Linux Kernel Mailing List, linux-riscv, Bin Meng
Hi Geert,
On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Bing,
>
> On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > From: Bin Meng <bin.meng@windriver.com>
> >
> > U-Boot expects this alias to be in place in order to fix up the mac
> > address of the ethernet node.
> >
> > Note on the Icicle Kit board, currently only emac1 is enabled so it
> > becomes the 'ethernet0'.
> >
> > Signed-off-by: Bin Meng <bin.meng@windriver.com>
>
> Thanks for your patch!
Thanks for the review!
>
> > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > @@ -9,6 +9,10 @@ / {
> > model = "Microchip MPFS Icicle Kit";
> > compatible = "microchip,mpfs-icicle-kit";
> >
> > + aliases {
> > + ethernet0 = &emac1;
> > + };
> > +
> > chosen {
> > };
>
> This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
> instead.
I was wondering the same thing before doing this, but when I checked
all other DTS in arch/riscv/boot I found the aliases node is put in
the SoC dtsi file instead of the board on so I think that's the
convention.
Regards,
Bin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-07-16 10:14 ` Bin Meng
0 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-07-16 10:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra,
Linux Kernel Mailing List, linux-riscv, Bin Meng
Hi Geert,
On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Bing,
>
> On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > From: Bin Meng <bin.meng@windriver.com>
> >
> > U-Boot expects this alias to be in place in order to fix up the mac
> > address of the ethernet node.
> >
> > Note on the Icicle Kit board, currently only emac1 is enabled so it
> > becomes the 'ethernet0'.
> >
> > Signed-off-by: Bin Meng <bin.meng@windriver.com>
>
> Thanks for your patch!
Thanks for the review!
>
> > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > @@ -9,6 +9,10 @@ / {
> > model = "Microchip MPFS Icicle Kit";
> > compatible = "microchip,mpfs-icicle-kit";
> >
> > + aliases {
> > + ethernet0 = &emac1;
> > + };
> > +
> > chosen {
> > };
>
> This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
> instead.
I was wondering the same thing before doing this, but when I checked
all other DTS in arch/riscv/boot I found the aliases node is put in
the SoC dtsi file instead of the board on so I think that's the
convention.
Regards,
Bin
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-07-16 10:14 ` Bin Meng
@ 2021-07-16 11:34 ` Geert Uytterhoeven
-1 siblings, 0 replies; 22+ messages in thread
From: Geert Uytterhoeven @ 2021-07-16 11:34 UTC (permalink / raw)
To: Bin Meng
Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra,
Linux Kernel Mailing List, linux-riscv, Bin Meng
Hi Bin,
On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > > @@ -9,6 +9,10 @@ / {
> > > model = "Microchip MPFS Icicle Kit";
> > > compatible = "microchip,mpfs-icicle-kit";
> > >
> > > + aliases {
> > > + ethernet0 = &emac1;
> > > + };
> > > +
> > > chosen {
> > > };
> >
> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
> > instead.
>
> I was wondering the same thing before doing this, but when I checked
> all other DTS in arch/riscv/boot I found the aliases node is put in
> the SoC dtsi file instead of the board on so I think that's the
> convention.
The numbering of the aliases is supposed to match the labels on the
board, hence it is board-specific, not SoC-specific.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-07-16 11:34 ` Geert Uytterhoeven
0 siblings, 0 replies; 22+ messages in thread
From: Geert Uytterhoeven @ 2021-07-16 11:34 UTC (permalink / raw)
To: Bin Meng
Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra,
Linux Kernel Mailing List, linux-riscv, Bin Meng
Hi Bin,
On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > > @@ -9,6 +9,10 @@ / {
> > > model = "Microchip MPFS Icicle Kit";
> > > compatible = "microchip,mpfs-icicle-kit";
> > >
> > > + aliases {
> > > + ethernet0 = &emac1;
> > > + };
> > > +
> > > chosen {
> > > };
> >
> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
> > instead.
>
> I was wondering the same thing before doing this, but when I checked
> all other DTS in arch/riscv/boot I found the aliases node is put in
> the SoC dtsi file instead of the board on so I think that's the
> convention.
The numbering of the aliases is supposed to match the labels on the
board, hence it is board-specific, not SoC-specific.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-07-16 11:34 ` Geert Uytterhoeven
@ 2021-08-04 3:55 ` Palmer Dabbelt
-1 siblings, 0 replies; 22+ messages in thread
From: Palmer Dabbelt @ 2021-08-04 3:55 UTC (permalink / raw)
To: geert
Cc: bmeng.cn, lewis.hanly, Atish Patra, linux-kernel, linux-riscv, bin.meng
On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote:
> Hi Bin,
>
> On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> > > @@ -9,6 +9,10 @@ / {
>> > > model = "Microchip MPFS Icicle Kit";
>> > > compatible = "microchip,mpfs-icicle-kit";
>> > >
>> > > + aliases {
>> > > + ethernet0 = &emac1;
>> > > + };
>> > > +
>> > > chosen {
>> > > };
>> >
>> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
>> > instead.
>>
>> I was wondering the same thing before doing this, but when I checked
>> all other DTS in arch/riscv/boot I found the aliases node is put in
>> the SoC dtsi file instead of the board on so I think that's the
>> convention.
>
> The numbering of the aliases is supposed to match the labels on the
> board, hence it is board-specific, not SoC-specific.
>
> Gr{oetje,eeting}s,
>
> Geert
I don't see a v2 of this.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-08-04 3:55 ` Palmer Dabbelt
0 siblings, 0 replies; 22+ messages in thread
From: Palmer Dabbelt @ 2021-08-04 3:55 UTC (permalink / raw)
To: geert
Cc: bmeng.cn, lewis.hanly, Atish Patra, linux-kernel, linux-riscv, bin.meng
On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote:
> Hi Bin,
>
> On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> > > @@ -9,6 +9,10 @@ / {
>> > > model = "Microchip MPFS Icicle Kit";
>> > > compatible = "microchip,mpfs-icicle-kit";
>> > >
>> > > + aliases {
>> > > + ethernet0 = &emac1;
>> > > + };
>> > > +
>> > > chosen {
>> > > };
>> >
>> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
>> > instead.
>>
>> I was wondering the same thing before doing this, but when I checked
>> all other DTS in arch/riscv/boot I found the aliases node is put in
>> the SoC dtsi file instead of the board on so I think that's the
>> convention.
>
> The numbering of the aliases is supposed to match the labels on the
> board, hence it is board-specific, not SoC-specific.
>
> Gr{oetje,eeting}s,
>
> Geert
I don't see a v2 of this.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-08-04 3:55 ` Palmer Dabbelt
@ 2021-08-04 3:55 ` Bin Meng
-1 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-08-04 3:55 UTC (permalink / raw)
To: Palmer Dabbelt
Cc: Geert Uytterhoeven, Lewis Hanly, Atish Patra, linux-kernel,
linux-riscv, Bin Meng
On Wed, Aug 4, 2021 at 11:55 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>
> On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote:
> > Hi Bin,
> >
> > On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> >> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> >> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> >> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> >> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> >> > > @@ -9,6 +9,10 @@ / {
> >> > > model = "Microchip MPFS Icicle Kit";
> >> > > compatible = "microchip,mpfs-icicle-kit";
> >> > >
> >> > > + aliases {
> >> > > + ethernet0 = &emac1;
> >> > > + };
> >> > > +
> >> > > chosen {
> >> > > };
> >> >
> >> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
> >> > instead.
> >>
> >> I was wondering the same thing before doing this, but when I checked
> >> all other DTS in arch/riscv/boot I found the aliases node is put in
> >> the SoC dtsi file instead of the board on so I think that's the
> >> convention.
> >
> > The numbering of the aliases is supposed to match the labels on the
> > board, hence it is board-specific, not SoC-specific.
> >
> > Gr{oetje,eeting}s,
> >
> > Geert
>
> I don't see a v2 of this.
Will send v2 soon.
Regards,
Bin
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-08-04 3:55 ` Bin Meng
0 siblings, 0 replies; 22+ messages in thread
From: Bin Meng @ 2021-08-04 3:55 UTC (permalink / raw)
To: Palmer Dabbelt
Cc: Geert Uytterhoeven, Lewis Hanly, Atish Patra, linux-kernel,
linux-riscv, Bin Meng
On Wed, Aug 4, 2021 at 11:55 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>
> On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote:
> > Hi Bin,
> >
> > On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
> >> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> >> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> >> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> >> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> >> > > @@ -9,6 +9,10 @@ / {
> >> > > model = "Microchip MPFS Icicle Kit";
> >> > > compatible = "microchip,mpfs-icicle-kit";
> >> > >
> >> > > + aliases {
> >> > > + ethernet0 = &emac1;
> >> > > + };
> >> > > +
> >> > > chosen {
> >> > > };
> >> >
> >> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
> >> > instead.
> >>
> >> I was wondering the same thing before doing this, but when I checked
> >> all other DTS in arch/riscv/boot I found the aliases node is put in
> >> the SoC dtsi file instead of the board on so I think that's the
> >> convention.
> >
> > The numbering of the aliases is supposed to match the labels on the
> > board, hence it is board-specific, not SoC-specific.
> >
> > Gr{oetje,eeting}s,
> >
> > Geert
>
> I don't see a v2 of this.
Will send v2 soon.
Regards,
Bin
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
2021-08-04 3:55 ` Bin Meng
@ 2021-08-04 4:18 ` Palmer Dabbelt
-1 siblings, 0 replies; 22+ messages in thread
From: Palmer Dabbelt @ 2021-08-04 4:18 UTC (permalink / raw)
To: bmeng.cn
Cc: geert, lewis.hanly, Atish Patra, linux-kernel, linux-riscv, bin.meng
On Tue, 03 Aug 2021 20:55:56 PDT (-0700), bmeng.cn@gmail.com wrote:
> On Wed, Aug 4, 2021 at 11:55 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>>
>> On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote:
>> > Hi Bin,
>> >
>> > On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>> >> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>> >> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>> >> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> >> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> >> > > @@ -9,6 +9,10 @@ / {
>> >> > > model = "Microchip MPFS Icicle Kit";
>> >> > > compatible = "microchip,mpfs-icicle-kit";
>> >> > >
>> >> > > + aliases {
>> >> > > + ethernet0 = &emac1;
>> >> > > + };
>> >> > > +
>> >> > > chosen {
>> >> > > };
>> >> >
>> >> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
>> >> > instead.
>> >>
>> >> I was wondering the same thing before doing this, but when I checked
>> >> all other DTS in arch/riscv/boot I found the aliases node is put in
>> >> the SoC dtsi file instead of the board on so I think that's the
>> >> convention.
>> >
>> > The numbering of the aliases is supposed to match the labels on the
>> > board, hence it is board-specific, not SoC-specific.
>> >
>> > Gr{oetje,eeting}s,
>> >
>> > Geert
>>
>> I don't see a v2 of this.
>
> Will send v2 soon.
Thanks. I'm assuming you're going to send both patches.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node
@ 2021-08-04 4:18 ` Palmer Dabbelt
0 siblings, 0 replies; 22+ messages in thread
From: Palmer Dabbelt @ 2021-08-04 4:18 UTC (permalink / raw)
To: bmeng.cn
Cc: geert, lewis.hanly, Atish Patra, linux-kernel, linux-riscv, bin.meng
On Tue, 03 Aug 2021 20:55:56 PDT (-0700), bmeng.cn@gmail.com wrote:
> On Wed, Aug 4, 2021 at 11:55 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>>
>> On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote:
>> > Hi Bin,
>> >
>> > On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>> >> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>> >> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>> >> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> >> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
>> >> > > @@ -9,6 +9,10 @@ / {
>> >> > > model = "Microchip MPFS Icicle Kit";
>> >> > > compatible = "microchip,mpfs-icicle-kit";
>> >> > >
>> >> > > + aliases {
>> >> > > + ethernet0 = &emac1;
>> >> > > + };
>> >> > > +
>> >> > > chosen {
>> >> > > };
>> >> >
>> >> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts)
>> >> > instead.
>> >>
>> >> I was wondering the same thing before doing this, but when I checked
>> >> all other DTS in arch/riscv/boot I found the aliases node is put in
>> >> the SoC dtsi file instead of the board on so I think that's the
>> >> convention.
>> >
>> > The numbering of the aliases is supposed to match the labels on the
>> > board, hence it is board-specific, not SoC-specific.
>> >
>> > Gr{oetje,eeting}s,
>> >
>> > Geert
>>
>> I don't see a v2 of this.
>
> Will send v2 soon.
Thanks. I'm assuming you're going to send both patches.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2021-08-04 4:18 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-02 1:43 [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng
2021-07-02 1:43 ` Bin Meng
2021-07-02 1:43 ` [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node Bin Meng
2021-07-02 1:43 ` Bin Meng
2021-07-09 10:06 ` Conor.Dooley
2021-07-09 10:06 ` Conor.Dooley
2021-07-16 9:23 ` Geert Uytterhoeven
2021-07-16 9:23 ` Geert Uytterhoeven
2021-07-16 10:14 ` Bin Meng
2021-07-16 10:14 ` Bin Meng
2021-07-16 11:34 ` Geert Uytterhoeven
2021-07-16 11:34 ` Geert Uytterhoeven
2021-08-04 3:55 ` Palmer Dabbelt
2021-08-04 3:55 ` Palmer Dabbelt
2021-08-04 3:55 ` Bin Meng
2021-08-04 3:55 ` Bin Meng
2021-08-04 4:18 ` Palmer Dabbelt
2021-08-04 4:18 ` Palmer Dabbelt
2021-07-08 13:40 ` [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng
2021-07-08 13:40 ` Bin Meng
2021-07-09 9:20 ` Conor.Dooley
2021-07-09 9:20 ` Conor.Dooley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.