All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: dev@dpdk.org
Cc: David Marchand <david.marchand@redhat.com>,
	Igor Romanov <igor.romanov@oktetlabs.ru>,
	Andy Moreton <amoreton@xilinx.com>,
	Ivan Malov <ivan.malov@oktetlabs.ru>
Subject: [dpdk-dev] [PATCH v4 14/20] common/sfc_efx/base: add counter stream MCDI wrappers
Date: Fri,  2 Jul 2021 11:39:42 +0300	[thread overview]
Message-ID: <20210702083948.546667-15-andrew.rybchenko@oktetlabs.ru> (raw)
In-Reply-To: <20210702083948.546667-1-andrew.rybchenko@oktetlabs.ru>

From: Igor Romanov <igor.romanov@oktetlabs.ru>

The MCDIs will be used to control counter Rx queue packet flow.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
---
 drivers/common/sfc_efx/base/efx.h     |  32 ++++++
 drivers/common/sfc_efx/base/efx_mae.c | 138 ++++++++++++++++++++++++++
 drivers/common/sfc_efx/version.map    |   3 +
 3 files changed, 173 insertions(+)

diff --git a/drivers/common/sfc_efx/base/efx.h b/drivers/common/sfc_efx/base/efx.h
index b789e19b98..a5d40c2e3d 100644
--- a/drivers/common/sfc_efx/base/efx.h
+++ b/drivers/common/sfc_efx/base/efx.h
@@ -4437,6 +4437,38 @@ efx_mae_counters_free(
 	__in_ecount(n_counters)		const efx_counter_t *countersp,
 	__out_opt			uint32_t *gen_countp);
 
+/* When set, include counters with a value of zero */
+#define	EFX_MAE_COUNTERS_STREAM_IN_ZERO_SQUASH_DISABLE	(1U << 0)
+
+/*
+ * Set if credit-based flow control is used. In this case the driver
+ * must call efx_mae_counters_stream_give_credits() to notify the
+ * packetiser of descriptors written.
+ */
+#define	EFX_MAE_COUNTERS_STREAM_OUT_USES_CREDITS	(1U << 0)
+
+LIBEFX_API
+extern	__checkReturn			efx_rc_t
+efx_mae_counters_stream_start(
+	__in				efx_nic_t *enp,
+	__in				uint16_t rxq_id,
+	__in				uint16_t packet_size,
+	__in				uint32_t flags_in,
+	__out				uint32_t *flags_out);
+
+LIBEFX_API
+extern	__checkReturn			efx_rc_t
+efx_mae_counters_stream_stop(
+	__in				efx_nic_t *enp,
+	__in				uint16_t rxq_id,
+	__out_opt			uint32_t *gen_countp);
+
+LIBEFX_API
+extern	__checkReturn			efx_rc_t
+efx_mae_counters_stream_give_credits(
+	__in				efx_nic_t *enp,
+	__in				uint32_t n_credits);
+
 LIBEFX_API
 extern	__checkReturn			efx_rc_t
 efx_mae_action_set_free(
diff --git a/drivers/common/sfc_efx/base/efx_mae.c b/drivers/common/sfc_efx/base/efx_mae.c
index cf6c449a16..1f313c8127 100644
--- a/drivers/common/sfc_efx/base/efx_mae.c
+++ b/drivers/common/sfc_efx/base/efx_mae.c
@@ -2535,6 +2535,144 @@ efx_mae_counters_free(
 	EFSYS_PROBE(fail2);
 fail1:
 	EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+	return (rc);
+}
+
+	__checkReturn			efx_rc_t
+efx_mae_counters_stream_start(
+	__in				efx_nic_t *enp,
+	__in				uint16_t rxq_id,
+	__in				uint16_t packet_size,
+	__in				uint32_t flags_in,
+	__out				uint32_t *flags_out)
+{
+	efx_mcdi_req_t req;
+	EFX_MCDI_DECLARE_BUF(payload, MC_CMD_MAE_COUNTERS_STREAM_START_IN_LEN,
+			     MC_CMD_MAE_COUNTERS_STREAM_START_OUT_LEN);
+	efx_rc_t rc;
+
+	EFX_STATIC_ASSERT(EFX_MAE_COUNTERS_STREAM_IN_ZERO_SQUASH_DISABLE ==
+	    1U << MC_CMD_MAE_COUNTERS_STREAM_START_IN_ZERO_SQUASH_DISABLE_LBN);
+
+	EFX_STATIC_ASSERT(EFX_MAE_COUNTERS_STREAM_OUT_USES_CREDITS ==
+	    1U << MC_CMD_MAE_COUNTERS_STREAM_START_OUT_USES_CREDITS_LBN);
+
+	req.emr_cmd = MC_CMD_MAE_COUNTERS_STREAM_START;
+	req.emr_in_buf = payload;
+	req.emr_in_length = MC_CMD_MAE_COUNTERS_STREAM_START_IN_LEN;
+	req.emr_out_buf = payload;
+	req.emr_out_length = MC_CMD_MAE_COUNTERS_STREAM_START_OUT_LEN;
+
+	MCDI_IN_SET_WORD(req, MAE_COUNTERS_STREAM_START_IN_QID, rxq_id);
+	MCDI_IN_SET_WORD(req, MAE_COUNTERS_STREAM_START_IN_PACKET_SIZE,
+			 packet_size);
+	MCDI_IN_SET_DWORD(req, MAE_COUNTERS_STREAM_START_IN_FLAGS, flags_in);
+
+	efx_mcdi_execute(enp, &req);
+
+	if (req.emr_rc != 0) {
+		rc = req.emr_rc;
+		goto fail1;
+	}
+
+	if (req.emr_out_length_used <
+	    MC_CMD_MAE_COUNTERS_STREAM_START_OUT_LEN) {
+		rc = EMSGSIZE;
+		goto fail2;
+	}
+
+	*flags_out = MCDI_OUT_DWORD(req, MAE_COUNTERS_STREAM_START_OUT_FLAGS);
+
+	return (0);
+
+fail2:
+	EFSYS_PROBE(fail2);
+fail1:
+	EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+	return (rc);
+}
+
+	__checkReturn			efx_rc_t
+efx_mae_counters_stream_stop(
+	__in				efx_nic_t *enp,
+	__in				uint16_t rxq_id,
+	__out_opt			uint32_t *gen_countp)
+{
+	efx_mcdi_req_t req;
+	EFX_MCDI_DECLARE_BUF(payload, MC_CMD_MAE_COUNTERS_STREAM_STOP_IN_LEN,
+			     MC_CMD_MAE_COUNTERS_STREAM_STOP_OUT_LEN);
+	efx_rc_t rc;
+
+	req.emr_cmd = MC_CMD_MAE_COUNTERS_STREAM_STOP;
+	req.emr_in_buf = payload;
+	req.emr_in_length = MC_CMD_MAE_COUNTERS_STREAM_STOP_IN_LEN;
+	req.emr_out_buf = payload;
+	req.emr_out_length = MC_CMD_MAE_COUNTERS_STREAM_STOP_OUT_LEN;
+
+	MCDI_IN_SET_WORD(req, MAE_COUNTERS_STREAM_STOP_IN_QID, rxq_id);
+
+	efx_mcdi_execute(enp, &req);
+
+	if (req.emr_rc != 0) {
+		rc = req.emr_rc;
+		goto fail1;
+	}
+
+	if (req.emr_out_length_used <
+	    MC_CMD_MAE_COUNTERS_STREAM_STOP_OUT_LEN) {
+		rc = EMSGSIZE;
+		goto fail2;
+	}
+
+	if (gen_countp != NULL) {
+		*gen_countp = MCDI_OUT_DWORD(req,
+			    MAE_COUNTERS_STREAM_STOP_OUT_GENERATION_COUNT);
+	}
+
+	return (0);
+
+fail2:
+	EFSYS_PROBE(fail2);
+fail1:
+	EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+	return (rc);
+}
+
+	__checkReturn			efx_rc_t
+efx_mae_counters_stream_give_credits(
+	__in				efx_nic_t *enp,
+	__in				uint32_t n_credits)
+{
+	efx_mcdi_req_t req;
+	EFX_MCDI_DECLARE_BUF(payload,
+			     MC_CMD_MAE_COUNTERS_STREAM_GIVE_CREDITS_IN_LEN,
+			     MC_CMD_MAE_COUNTERS_STREAM_GIVE_CREDITS_OUT_LEN);
+	efx_rc_t rc;
+
+	req.emr_cmd = MC_CMD_MAE_COUNTERS_STREAM_GIVE_CREDITS;
+	req.emr_in_buf = payload;
+	req.emr_in_length = MC_CMD_MAE_COUNTERS_STREAM_GIVE_CREDITS_IN_LEN;
+	req.emr_out_buf = payload;
+	req.emr_out_length = MC_CMD_MAE_COUNTERS_STREAM_GIVE_CREDITS_OUT_LEN;
+
+	MCDI_IN_SET_DWORD(req, MAE_COUNTERS_STREAM_GIVE_CREDITS_IN_NUM_CREDITS,
+			 n_credits);
+
+	efx_mcdi_execute(enp, &req);
+
+	if (req.emr_rc != 0) {
+		rc = req.emr_rc;
+		goto fail1;
+	}
+
+	return (0);
+
+fail1:
+	EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
 	return (rc);
 }
 
diff --git a/drivers/common/sfc_efx/version.map b/drivers/common/sfc_efx/version.map
index d60cd477fa..7f69d6bb0d 100644
--- a/drivers/common/sfc_efx/version.map
+++ b/drivers/common/sfc_efx/version.map
@@ -104,6 +104,9 @@ INTERNAL {
 	efx_mae_action_set_specs_equal;
 	efx_mae_counters_alloc;
 	efx_mae_counters_free;
+	efx_mae_counters_stream_give_credits;
+	efx_mae_counters_stream_start;
+	efx_mae_counters_stream_stop;
 	efx_mae_encap_header_alloc;
 	efx_mae_encap_header_free;
 	efx_mae_fini;
-- 
2.30.2


  parent reply	other threads:[~2021-07-02  8:42 UTC|newest]

Thread overview: 104+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-27 15:24 [dpdk-dev] [PATCH 00/20] net/sfc: support flow API COUNT action Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 01/20] net/sfc: introduce ethdev Rx queue ID Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 02/20] net/sfc: do not enable interrupts on internal Rx queues Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 03/20] common/sfc_efx/base: separate target EvQ and IRQ config Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 04/20] common/sfc_efx/base: support custom EvQ to IRQ mapping Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 05/20] net/sfc: explicitly control IRQ used for Rx queues Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 06/20] net/sfc: introduce ethdev Tx queue ID Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 07/20] common/sfc_efx/base: add ingress m-port RxQ flag Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 08/20] common/sfc_efx/base: add user mark " Andrew Rybchenko
2021-05-27 15:24 ` [dpdk-dev] [PATCH 09/20] net/sfc: add abstractions for the management EVQ identity Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 10/20] net/sfc: add support for initialising different RxQ types Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 11/20] net/sfc: add NUMA-aware registry of service logical cores Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 12/20] net/sfc: reserve RxQ for counters Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 13/20] common/sfc_efx/base: add counter creation MCDI wrappers Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 14/20] common/sfc_efx/base: add counter stream " Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 15/20] common/sfc_efx/base: support counter in action set Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 16/20] net/sfc: add Rx datapath method to get pushed buffers count Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 17/20] common/sfc_efx/base: add max MAE counters to limits Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 18/20] common/sfc_efx/base: add packetiser packet format definition Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 19/20] net/sfc: support flow action COUNT in transfer rules Andrew Rybchenko
2021-05-27 15:25 ` [dpdk-dev] [PATCH 20/20] net/sfc: support flow API query for count actions Andrew Rybchenko
2021-06-04 14:23 ` [dpdk-dev] [PATCH v2 00/20] net/sfc: support flow API COUNT action Andrew Rybchenko
2021-06-04 14:23   ` [dpdk-dev] [PATCH v2 01/20] net/sfc: introduce ethdev Rx queue ID Andrew Rybchenko
2021-06-04 14:23   ` [dpdk-dev] [PATCH v2 02/20] net/sfc: do not enable interrupts on internal Rx queues Andrew Rybchenko
2021-06-04 14:23   ` [dpdk-dev] [PATCH v2 03/20] common/sfc_efx/base: separate target EvQ and IRQ config Andrew Rybchenko
2021-06-04 14:23   ` [dpdk-dev] [PATCH v2 04/20] common/sfc_efx/base: support custom EvQ to IRQ mapping Andrew Rybchenko
2021-06-04 14:23   ` [dpdk-dev] [PATCH v2 05/20] net/sfc: explicitly control IRQ used for Rx queues Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 06/20] net/sfc: introduce ethdev Tx queue ID Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 07/20] common/sfc_efx/base: add ingress m-port RxQ flag Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 08/20] common/sfc_efx/base: add user mark " Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 09/20] net/sfc: add abstractions for the management EVQ identity Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 10/20] net/sfc: add support for initialising different RxQ types Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 11/20] net/sfc: add NUMA-aware registry of service logical cores Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 12/20] net/sfc: reserve RxQ for counters Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 13/20] common/sfc_efx/base: add counter creation MCDI wrappers Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 14/20] common/sfc_efx/base: add counter stream " Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 15/20] common/sfc_efx/base: support counter in action set Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 16/20] net/sfc: add Rx datapath method to get pushed buffers count Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 17/20] common/sfc_efx/base: add max MAE counters to limits Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 18/20] common/sfc_efx/base: add packetiser packet format definition Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 19/20] net/sfc: support flow action COUNT in transfer rules Andrew Rybchenko
2021-06-04 14:24   ` [dpdk-dev] [PATCH v2 20/20] net/sfc: support flow API query for count actions Andrew Rybchenko
2021-06-17  8:37   ` [dpdk-dev] [PATCH v2 00/20] net/sfc: support flow API COUNT action David Marchand
2021-06-18 13:40     ` Andrew Rybchenko
2021-06-18 13:40 ` [dpdk-dev] [PATCH v3 " Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 01/20] net/sfc: introduce ethdev Rx queue ID Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 02/20] net/sfc: do not enable interrupts on internal Rx queues Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 03/20] common/sfc_efx/base: separate target EvQ and IRQ config Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 04/20] common/sfc_efx/base: support custom EvQ to IRQ mapping Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 05/20] net/sfc: explicitly control IRQ used for Rx queues Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 06/20] net/sfc: introduce ethdev Tx queue ID Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 07/20] common/sfc_efx/base: add ingress m-port RxQ flag Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 08/20] common/sfc_efx/base: add user mark " Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 09/20] net/sfc: add abstractions for the management EVQ identity Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 10/20] net/sfc: add support for initialising different RxQ types Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 11/20] net/sfc: add NUMA-aware registry of service logical cores Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 12/20] net/sfc: reserve RxQ for counters Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 13/20] common/sfc_efx/base: add counter creation MCDI wrappers Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 14/20] common/sfc_efx/base: add counter stream " Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 15/20] common/sfc_efx/base: support counter in action set Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 16/20] net/sfc: add Rx datapath method to get pushed buffers count Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 17/20] common/sfc_efx/base: add max MAE counters to limits Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 18/20] common/sfc_efx/base: add packetiser packet format definition Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 19/20] net/sfc: support flow action COUNT in transfer rules Andrew Rybchenko
2021-06-21  8:28     ` David Marchand
2021-06-21  9:30       ` Thomas Monjalon
2021-07-01  9:22         ` Andrew Rybchenko
2021-07-01 12:34           ` David Marchand
2021-07-01 13:05             ` Andrew Rybchenko
2021-07-01 13:35               ` Bruce Richardson
2021-07-02  8:03                 ` Andrew Rybchenko
2021-07-02  8:43               ` Andrew Rybchenko
2021-07-02 12:30                 ` Thomas Monjalon
2021-07-02 12:53                   ` Andrew Rybchenko
2021-07-04 19:45                     ` Thomas Monjalon
2021-07-05  8:41                       ` Andrew Rybchenko
2021-07-02 13:37                 ` David Marchand
2021-07-02 13:39                   ` Andrew Rybchenko
2021-06-18 13:40   ` [dpdk-dev] [PATCH v3 20/20] net/sfc: support flow API query for count actions Andrew Rybchenko
2021-07-02  8:39 ` [dpdk-dev] [PATCH v4 00/20] net/sfc: support flow API COUNT action Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 01/20] net/sfc: introduce ethdev Rx queue ID Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 02/20] net/sfc: do not enable interrupts on internal Rx queues Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 03/20] common/sfc_efx/base: separate target EvQ and IRQ config Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 04/20] common/sfc_efx/base: support custom EvQ to IRQ mapping Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 05/20] net/sfc: explicitly control IRQ used for Rx queues Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 06/20] net/sfc: introduce ethdev Tx queue ID Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 07/20] common/sfc_efx/base: add ingress m-port RxQ flag Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 08/20] common/sfc_efx/base: add user mark " Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 09/20] net/sfc: add abstractions for the management EVQ identity Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 10/20] net/sfc: add support for initialising different RxQ types Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 11/20] net/sfc: add NUMA-aware registry of service logical cores Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 12/20] net/sfc: reserve RxQ for counters Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 13/20] common/sfc_efx/base: add counter creation MCDI wrappers Andrew Rybchenko
2021-07-02  8:39   ` Andrew Rybchenko [this message]
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 15/20] common/sfc_efx/base: support counter in action set Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 16/20] net/sfc: add Rx datapath method to get pushed buffers count Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 17/20] common/sfc_efx/base: add max MAE counters to limits Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 18/20] common/sfc_efx/base: add packetiser packet format definition Andrew Rybchenko
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 19/20] net/sfc: support flow action COUNT in transfer rules Andrew Rybchenko
2021-07-15 14:58     ` David Marchand
2021-07-15 18:30       ` Ivan Malov
2021-07-16 12:12     ` David Marchand
2021-07-02  8:39   ` [dpdk-dev] [PATCH v4 20/20] net/sfc: support flow API query for count actions Andrew Rybchenko
2021-07-20 12:19   ` [dpdk-dev] [PATCH v4 00/20] net/sfc: support flow API COUNT action David Marchand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210702083948.546667-15-andrew.rybchenko@oktetlabs.ru \
    --to=andrew.rybchenko@oktetlabs.ru \
    --cc=amoreton@xilinx.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=igor.romanov@oktetlabs.ru \
    --cc=ivan.malov@oktetlabs.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.