From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.1 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 981BCC11F68 for ; Fri, 2 Jul 2021 13:13:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7923E6141D for ; Fri, 2 Jul 2021 13:13:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232499AbhGBNPx (ORCPT ); Fri, 2 Jul 2021 09:15:53 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52942 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231724AbhGBNPx (ORCPT ); Fri, 2 Jul 2021 09:15:53 -0400 Received: from gofer.mess.org (gofer.mess.org [IPv6:2a02:8011:d000:212::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 55093C061762; Fri, 2 Jul 2021 06:13:21 -0700 (PDT) Received: by gofer.mess.org (Postfix, from userid 1000) id B3AC3C6477; Fri, 2 Jul 2021 14:13:18 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=mess.org; s=2020; t=1625231598; bh=bqvcKHoL4a03FDlW7gyT+0kgj58bgMHpWrxejiAETEU=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=E6AwB6XD6Yxa1APqRgFUSbI5raeGrk23HcTDGdUQTnkkNnv2i/fJW+5zpxlsrMZbj dwWo/t2eVv/UN/920NnkqSf92TbitY9wKldzPGVfWYhpPpcde1G6BxGqNJtdvvnVVN uvxwpd8NHhOntYQtZAOTXPMipyojDEoh0sc+HzcL6PDlPj8xFVEbPx4SPVbi6DebLQ 8C3ll3ERuydGRJG/aBggKhyvOVkxoKotHslDflt12LbKLdb2w/7cvCXf7dmkddm9JV t+Ipb7yJwaQhloPNLFew7nDg96RG4KdOk6r7ow4IsMfp7ITfN0JB7PmqufMRsg9KF0 5cPVhWpgoFd4A== Date: Fri, 2 Jul 2021 14:13:18 +0100 From: Sean Young To: Johan Hovold Cc: linux-media@vger.kernel.org, linux-usb@vger.kernel.org, Greg Kroah-Hartman , Jon Rhees , Oliver Neukum Subject: Re: [PATCH v5 1/2] media: rc: new driver for USB-UIRT device Message-ID: <20210702131318.GB29760@gofer.mess.org> References: <710e8007bc7365be8f999bae3aafaa22c3b2f7d1.1624006513.git.sean@mess.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.10.1 (2018-07-13) Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org On Fri, Jul 02, 2021 at 12:42:18PM +0200, Johan Hovold wrote: > On Fri, Jun 18, 2021 at 11:18:46AM +0100, Sean Young wrote: > > This device uses an ftdi usb serial port, so this driver has a tiny > > amount of usb ftdi code. It would be preferable to connect this driver via > > serdev or line-discipline, but unfortunately neither support > > hotplugging yet. > > > > See http://www.usbuirt.com/ > > > > Signed-off-by: Sean Young > > --- > > drivers/media/rc/Kconfig | 11 + > > drivers/media/rc/Makefile | 1 + > > drivers/media/rc/uirt.c | 744 ++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 756 insertions(+) > > create mode 100644 drivers/media/rc/uirt.c > > > > diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig > > index d0a8326b75c2..cb1a2c65f920 100644 > > --- a/drivers/media/rc/Kconfig > > +++ b/drivers/media/rc/Kconfig > > @@ -471,6 +471,17 @@ config IR_TOY > > To compile this driver as a module, choose M here: the module will be > > called ir_toy. > > > > +config IR_UIRT > > + tristate "USB-UIRT" > > + depends on RC_CORE > > + depends on USB_ARCH_HAS_HCD > > + help > > + Say Y here if you want to use the USB-UIRT. See > > + http://www.usbuirt.com/ > > + > > + To compile this driver as a module, choose M here: the module will be > > + called uirt. > > + > > endif #RC_DEVICES > > > > endif #RC_CORE > > diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile > > index 692e9b6b203f..068036698747 100644 > > --- a/drivers/media/rc/Makefile > > +++ b/drivers/media/rc/Makefile > > @@ -50,3 +50,4 @@ obj-$(CONFIG_IR_SIR) += sir_ir.o > > obj-$(CONFIG_IR_MTK) += mtk-cir.o > > obj-$(CONFIG_RC_XBOX_DVD) += xbox_remote.o > > obj-$(CONFIG_IR_TOY) += ir_toy.o > > +obj-$(CONFIG_IR_UIRT) += uirt.o > > diff --git a/drivers/media/rc/uirt.c b/drivers/media/rc/uirt.c > > new file mode 100644 > > index 000000000000..928b29680f64 > > --- /dev/null > > +++ b/drivers/media/rc/uirt.c > > @@ -0,0 +1,744 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > + > > +/* > > + * USB-UIRT > > + * > > + * Copyright (C) 2021 Sean Young > > + * > > + * See http://www.usbuirt.com/USB-UIRT%20Command%20Protocol.doc > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#include > > + > > +/* Copied from drivers/usb/serial/ftdi_sio.h */ > > +#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 > > +#define FTDI_SIO_SET_BAUDRATE_REQUEST 3 > > + > > +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER > > +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 > > + > > +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 > > +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL > > + > > +#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ > > +#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ > > + > > +#define FTDI_SIO_RTS_CTS_HS BIT(8) > > +#define FTDI_RS0_CTS BIT(4) > > + > > +static const u8 CMD_GETVERSION[] = { 0x23, 0xdd }; > > +static const u8 CMD_SETMODERAW[] = { 0x21, 0xdf }; > > +static const u8 CMD_SETWIDEBAND[] = { 0x24, 0xdc }; > > + > > +#define UNIT_US 50 > > +#define IR_TIMEOUT 12500 > > +#define MAX_PACKET 64 > > + > > +enum cmd_state { > > + CMD_STATE_GETVERSION, > > + CMD_STATE_SETMODERAW, > > + CMD_STATE_SETMODEWIDEBAND, > > + CMD_STATE_IRDATA, > > + CMD_STATE_DOTXRAW, > > + CMD_STATE_STREAMING_TX, > > +}; > > + > > +enum rx_state { > > + RX_STATE_INTERSPACE_HIGH, > > + RX_STATE_INTERSPACE_LOW, > > + RX_STATE_ON_HIGH, > > + RX_STATE_ON_LOW, > > + RX_STATE_FREQ_HIGH, > > + RX_STATE_FREQ_LOW, > > + RX_STATE_OFF_HIGH, > > + RX_STATE_OFF_LOW, > > +}; > > + > > +struct uirt { > > + struct device *dev; > > + struct usb_device *usbdev; > > + > > + struct rc_dev *rc; > > + struct urb *urb_in, *urb_out; > > + > > + u8 *in; > > + u8 *out; > > + struct completion cmd_done; > > + u8 freq; > > + u8 high; > > + bool wideband; > > + u32 last_duration; > > + > > + enum cmd_state cmd_state; > > + enum rx_state rx_state; > > + > > + void *tx_buf; > > + u32 tx_len; > > + > > + char phys[64]; > > +}; > > + > > +// read IR in raw mode > > +static void uirt_raw_mode(struct uirt *uirt, u32 offset, u32 len) > > +{ > > + uint i, duration; > > + > > + for (i = offset; i < len; i++) { > > + switch (uirt->rx_state) { > > + case RX_STATE_INTERSPACE_HIGH: > > + uirt->rx_state = RX_STATE_INTERSPACE_LOW; > > + break; > > + case RX_STATE_INTERSPACE_LOW: > > + uirt->rx_state = RX_STATE_ON_HIGH; > > + break; > > + case RX_STATE_ON_HIGH: > > + duration = uirt->in[i]; > > + if (duration == 0) > > + duration = 1; > > + > > + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { > > + .duration = duration * UNIT_US, > > + .pulse = true, > > + })); > > + > > + uirt->rx_state = RX_STATE_OFF_HIGH; > > + break; > > + case RX_STATE_OFF_HIGH: > > + if (uirt->in[i] == 0xff) { > > + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { > > + .duration = IR_TIMEOUT, > > + .timeout = true, > > + })); > > + uirt->rx_state = RX_STATE_INTERSPACE_HIGH; > > + break; > > + } > > + > > + duration = uirt->in[i]; > > + if (duration == 0) > > + duration = 1; > > + > > + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { > > + .duration = duration * UNIT_US, > > + .pulse = false, > > + })); > > + uirt->rx_state = RX_STATE_ON_HIGH; > > + break; > > + default: > > + WARN(1, "unreachable state"); > > This should probably be dev_warn_ratelimited() or similar. Judging from > a quick look a malicious device can end up triggering this. Well, the other states can reached only by enabling the wideband receiver and then disabling it again, and then the driver state machine needs to be broken too. Just belt and braces. > > + uirt->rx_state = RX_STATE_INTERSPACE_HIGH; > > + break; > > + } > > + } > > + > > + ir_raw_event_handle(uirt->rc); > > +} > > + > > +// Read IR in wideband mode. The byte stream is delivered in packets, > > +// and the values which come in two bytes may straddle two packets > > +static void uirt_wideband(struct uirt *uirt, u32 offset, u32 len) > > +{ > > + uint i, duration, carrier, pulses; > > + > > + for (i = offset; i < len; i++) { > > + switch (uirt->rx_state) { > > + case RX_STATE_INTERSPACE_HIGH: > > + uirt->rx_state = RX_STATE_INTERSPACE_LOW; > > + break; > > + case RX_STATE_INTERSPACE_LOW: > > + uirt->rx_state = RX_STATE_ON_HIGH; > > + break; > > + case RX_STATE_ON_HIGH: > > + uirt->high = uirt->in[i]; > > + uirt->rx_state = RX_STATE_ON_LOW; > > + break; > > + case RX_STATE_ON_LOW: > > + // duration is in 400ns units > > + duration = (uirt->high << 8) | uirt->in[i]; > > + uirt->last_duration = duration; > > + // Convert to microseconds > > + duration = DIV_ROUND_CLOSEST(duration * 2, 5); > > + if (duration == 0) > > + duration = 1; > > + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { > > + .duration = duration, > > + .pulse = true, > > + })); > > + uirt->rx_state = RX_STATE_FREQ_HIGH; > > + break; > > + case RX_STATE_FREQ_HIGH: > > + if (uirt->in[i] & 0x80) { > > + uirt->high = uirt->in[i] & 0x7f; > > + uirt->rx_state = RX_STATE_FREQ_LOW; > > + break; > > + } > > + > > + uirt->high = 0; > > + fallthrough; > > + case RX_STATE_FREQ_LOW: > > + pulses = (uirt->high << 8) | uirt->in[i]; > > + if (pulses && uirt->last_duration) { > > + dev_dbg(uirt->dev, "carrier duration %u pulses %u", > > + uirt->last_duration, pulses); > > + > > + // calculate the Hz of pulses in duration 400ns units > > + carrier = DIV_ROUND_CLOSEST_ULL(pulses * 10000000ull, > > + uirt->last_duration * 4); > > + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { > > + .carrier = carrier, > > + .carrier_report = true, > > + })); > > + } > > + uirt->rx_state = RX_STATE_OFF_HIGH; > > + break; > > + case RX_STATE_OFF_HIGH: > > + if (uirt->in[i] == 0xff) { > > + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { > > + .duration = IR_TIMEOUT, > > + .timeout = true, > > + })); > > + uirt->rx_state = RX_STATE_INTERSPACE_HIGH; > > + } else { > > + uirt->high = uirt->in[i]; > > + uirt->rx_state = RX_STATE_OFF_LOW; > > + } > > + break; > > + case RX_STATE_OFF_LOW: > > + // Convert 400ns units to microseconds > > + duration = DIV_ROUND_CLOSEST(((uirt->high << 8) | uirt->in[i]) * 2, 5); > > + if (duration == 0) > > + duration = 1; > > + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { > > + .duration = duration, > > + .pulse = false, > > + })); > > + uirt->rx_state = RX_STATE_ON_HIGH; > > + break; > > + } > > + } > > + > > + ir_raw_event_handle(uirt->rc); > > +} > > + > > +static void uirt_response(struct uirt *uirt, u32 len) > > +{ > > + int offset = 2; > > + int i; > > + > > + dev_dbg(uirt->dev, "state:%d data: %*phN\n", uirt->cmd_state, len, uirt->in); > > + > > + // Do we have more IR to transmit and is Clear-To-Send set > > + if (uirt->cmd_state == CMD_STATE_STREAMING_TX && len >= 2 && > > + uirt->tx_len && uirt->in[0] & FTDI_RS0_CTS) { > > Do you really need to handle this manually when you have hardware > assisted flow control enabled? I had not considered this. I'll look into it. > > + u32 len; > > + int err; > > + > > + len = min_t(u32, uirt->tx_len, MAX_PACKET); > > + > > + memcpy(uirt->out, uirt->tx_buf, len); > > + uirt->urb_out->transfer_buffer_length = len; > > + > > + uirt->tx_len -= len; > > + uirt->tx_buf += len; > > + > > + err = usb_submit_urb(uirt->urb_out, GFP_ATOMIC); > > + if (err != 0) > > + dev_warn(uirt->dev, > > + "failed to submit out urb: %d\n", err); > > + } > > + > > + // if we only have two bytes, it just gives us the serial line status > > + if (len <= 2) > > + return; > > + > > + // We have to assume that the response to a command is at the beginning > > + // of the packet. There is no way to distinguish IR data from command > > + // responses other than the position in the byte stream. > > + switch (uirt->cmd_state) { > > + case CMD_STATE_GETVERSION: > > + if (len >= 10) { > > + // check checksum > > + u8 checksum = 0; > > + > > + for (i = 2; i < len; i++) > > + checksum += uirt->in[i]; > > + > > + if (checksum != 0) { > > + dev_err(uirt->dev, "checksum does not match: %*phN\n", > > + len, uirt->in); > > Should this not be ratelimited too in case you get out of sync? The get version command is only issued during probe, so this can only occur once. > > + return; > > + } > > + > > + dev_info(uirt->dev, > > + "USB-UIRT firmware v%u.%u protocol v%u.%u %04u-%02u-%02u", > > Missing '\n' and in a lot of other printks throughout. Yes, good point. I'll fix this. > > + uirt->in[2], uirt->in[3], uirt->in[4], uirt->in[5], > > + uirt->in[8] + 2000, uirt->in[7], uirt->in[6]); > > + > > + complete(&uirt->cmd_done); > > + uirt->cmd_state = CMD_STATE_IRDATA; > > + offset += 10; > > + } > > + break; > > + case CMD_STATE_DOTXRAW: > > + case CMD_STATE_STREAMING_TX: > > + case CMD_STATE_SETMODERAW: > > + case CMD_STATE_SETMODEWIDEBAND: > > + if (len >= 3) { > > + switch (uirt->in[2]) { > > + case 0x20: > > + // 0x20 transmitting is expected during streaming tx > > + if (uirt->cmd_state == CMD_STATE_STREAMING_TX) > > + return; > > + > > + if (uirt->cmd_state == CMD_STATE_DOTXRAW) > > + complete(&uirt->cmd_done); > > + else > > + dev_err(uirt->dev, "device transmitting"); > > I think most of these printks need to be ratelimited or dev_dbg() since > bad input input can trigger them. All of these occur only as a response to an user space command, like transmit or switching wideband/narrowband receiver. These command are not issued very often, usually only in response to someone running ir-ctl(1) or so. > Another missing newline, but please fix throughout. Absolutely. > > + break; > > + case 0x21: > > + if (uirt->tx_len) { > > + dev_err(uirt->dev, "tx completed with %u left to send", > > + uirt->tx_len); > > + } else { > > + if (uirt->cmd_state == CMD_STATE_SETMODERAW) > > + uirt->wideband = false; > > + if (uirt->cmd_state == CMD_STATE_SETMODEWIDEBAND) > > + uirt->wideband = true; > > + > > + complete(&uirt->cmd_done); > > + } > > + break; > > + case 0x80: > > + dev_err(uirt->dev, "checksum error"); > > + break; > > + case 0x81: > > + dev_err(uirt->dev, "timeout"); > > + break; > > + case 0x82: > > + dev_err(uirt->dev, "command error"); > > + break; > > + default: > > + dev_err(uirt->dev, "unknown response"); > > + } > > + > > + uirt->cmd_state = CMD_STATE_IRDATA; > > + offset += 1; > > + } > > + default: > > + break; > > + } > > + > > + if (uirt->wideband) > > + uirt_wideband(uirt, offset, len); > > + else > > + uirt_raw_mode(uirt, offset, len); > > +} > > > +static int uirt_command(struct uirt *uirt, const u8 *cmd, u32 cmd_len, > > + enum cmd_state state) > > +{ > > + int err; > > + > > + init_completion(&uirt->cmd_done); > > + > > + uirt->cmd_state = state; > > + > > + memcpy(uirt->out, cmd, cmd_len); > > + uirt->urb_out->transfer_buffer_length = cmd_len; > > + > > + err = usb_submit_urb(uirt->urb_out, GFP_KERNEL); > > + if (err != 0) { > > + uirt->cmd_state = CMD_STATE_IRDATA; > > + return err; > > + } > > + > > + if (!wait_for_completion_timeout(&uirt->cmd_done, > > + msecs_to_jiffies(USB_CTRL_SET_TIMEOUT))) { > > + usb_kill_urb(uirt->urb_out); > > + uirt->cmd_state = CMD_STATE_IRDATA; > > + return -ETIMEDOUT; > > + } > > + > > + return 0; > > +} > > > +static int uirt_tx(struct rc_dev *rc, uint *txbuf, uint count) > > +{ > > + struct uirt *uirt = rc->priv; > > + u8 *out; > > + u32 i, dest, unit_raw, freq, len; > > + int err; > > + > > + // streaming tx does not work for short IR; use non-streaming > > + // tx for short IR > > + if (count <= 24) > > + return uirt_short_tx(rc, txbuf, count); > > + > > + out = kmalloc(count * 2 + 3, GFP_KERNEL); > > + if (!out) > > + return -ENOMEM; > > + > > + out[0] = 0x25; // Streaming Transmit > > + out[1] = 0xdb; // checksum over command (just the previous byte) > > + out[2] = uirt->freq; // carrier frequency > > + > > + dest = 3; > > + > > + freq = uirt->freq & 0x7f; > > + > > + for (i = 0; i < count; i++) { > > + // width = (us / freq) * 2.5 > > + unit_raw = DIV_ROUND_CLOSEST(txbuf[i] * 5, freq * 2); > > + > > + if (unit_raw == 0) > > + unit_raw = 1; > > + else if (unit_raw > 127) > > + out[dest++] = (unit_raw >> 8) | 0x80; > > + > > + out[dest++] = unit_raw; > > + } > > + > > + len = min_t(u32, dest, MAX_PACKET); > > + > > + uirt->tx_buf = out + len; > > + uirt->tx_len = dest - len; > > + > > + err = uirt_command(uirt, out, len, CMD_STATE_STREAMING_TX); > > + kfree(out); > > This look fragile; are you sure nothing can access uirt_tx->buf (out) > after the command returns here? So the in urb handler may access it, but the state should be reset to CMD_STATE_IRDATA. Having said that, the state is not spinlock protected, so this is racy. Thanks for pointing that out. > > + if (err != 0) > > + return err; > > + > > + return count; > > +} > > + > > +static int uirt_set_tx_carrier(struct rc_dev *dev, u32 carrier) > > +{ > > + struct uirt *uirt = dev->priv; > > + > > + if (carrier == 0) > > + // bit 7 must be 1 for unmodulated, lower bits need to > > + // be something that makes sense for tx > > + uirt->freq = 0xc0; > > + else if (carrier >= 20000 && carrier <= 500000) > > + // bit 7 must be 0 for modulated > > + uirt->freq = 2500000 / carrier; > > + else > > + return -EINVAL; > > + > > + return 0; > > +} > > + > > +static int uirt_set_rx_wideband(struct rc_dev *dev, int enable) > > +{ > > + struct uirt *uirt = dev->priv; > > + int err; > > + > > + if (enable) > > + err = uirt_command(uirt, CMD_SETWIDEBAND, > > + sizeof(CMD_SETWIDEBAND), > > + CMD_STATE_SETMODEWIDEBAND); > > + else > > + err = uirt_command(uirt, CMD_SETMODERAW, > > + sizeof(CMD_SETMODERAW), > > + CMD_STATE_SETMODERAW); > > + > > + if (err) { > > + dev_err(uirt->dev, "set mode command failed: %d\n", > > + err); > > + return err; > > + } > > + > > + return 0; > > +} > > + > > +static int init_ftdi(struct usb_device *udev) > > +{ > > + int err; > > + > > + // set the baud rate > > Please mention the rate here too. Ok. > > + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), > > + FTDI_SIO_SET_BAUDRATE_REQUEST, > > + FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, > > + 0x4009, 0x0001, > > + NULL, 0, USB_CTRL_SET_TIMEOUT); > > + if (err) > > + return err; > > + > > + // enabling rts/cts flow control > > + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), > > + FTDI_SIO_SET_FLOW_CTRL_REQUEST, > > + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, > > + 0, FTDI_SIO_RTS_CTS_HS, > > + NULL, 0, USB_CTRL_SET_TIMEOUT); > > + if (err) > > + return err; > > + > > + // Set latency in milliseconds. The USB-UIRT will generate a > > + // urb every latency milliseconds (IR or not), so this should be > > + // set as high as possible to reduce interrupts. However, setting > > + // this value too high will mean there is a preceptible delay for > > + // IR being processed and a key press being registered. > > + // > > + // Choose 50ms as a compromise. > > + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), > > + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, > > + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, > > + 50, 0, > > + NULL, 0, USB_CTRL_SET_TIMEOUT); > > +} > > Johan Thanks for the great review, I'll send out a new version when I'm done. Sean