* [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD
@ 2021-07-06 9:55 Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
` (19 more replies)
0 siblings, 20 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
This patch set provides a skeleton of ngbe PMD,
which adapted to Wangxun WX1860 series NICs.
v7:
- Fix minor issues and re-order patches.
v6:
- Correct style errors and re-split patches.
v5:
- Extend patches with device initialization and RxTx functions.
v4:
- Fix compile error.
v3:
- Use rte_ether functions to define marcos.
v2:
- Correct some clerical errors.
- Use ethdev debug flags instead of driver own.
Jiawen Wu (19):
net/ngbe: add build and doc infrastructure
net/ngbe: support probe and remove
net/ngbe: add log type and error type
net/ngbe: define registers
net/ngbe: set MAC type and LAN ID with device initialization
net/ngbe: init and validate EEPROM
net/ngbe: add HW initialization
net/ngbe: identify PHY and reset PHY
net/ngbe: store MAC address
net/ngbe: support link update
net/ngbe: setup the check PHY link
net/ngbe: add Rx queue setup and release
net/ngbe: add Tx queue setup and release
net/ngbe: add device start and stop operations
net/ngbe: add Tx queue start and stop
net/ngbe: add Rx queue start and stop
net/ngbe: add simple Rx flow
net/ngbe: add simple Tx flow
net/ngbe: support to close and reset device
MAINTAINERS | 6 +
doc/guides/nics/features/ngbe.ini | 15 +
doc/guides/nics/index.rst | 1 +
doc/guides/nics/ngbe.rst | 58 +
doc/guides/rel_notes/release_21_08.rst | 6 +
drivers/net/meson.build | 1 +
drivers/net/ngbe/base/meson.build | 21 +
drivers/net/ngbe/base/ngbe.h | 11 +
drivers/net/ngbe/base/ngbe_devids.h | 83 ++
drivers/net/ngbe/base/ngbe_dummy.h | 209 ++++
drivers/net/ngbe/base/ngbe_eeprom.c | 203 ++++
drivers/net/ngbe/base/ngbe_eeprom.h | 17 +
drivers/net/ngbe/base/ngbe_hw.c | 1068 +++++++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 59 +
drivers/net/ngbe/base/ngbe_mng.c | 198 ++++
drivers/net/ngbe/base/ngbe_mng.h | 65 ++
drivers/net/ngbe/base/ngbe_osdep.h | 183 +++
drivers/net/ngbe/base/ngbe_phy.c | 451 +++++++
drivers/net/ngbe/base/ngbe_phy.h | 62 +
drivers/net/ngbe/base/ngbe_phy_mvl.c | 251 ++++
drivers/net/ngbe/base/ngbe_phy_mvl.h | 97 ++
drivers/net/ngbe/base/ngbe_phy_rtl.c | 289 +++++
drivers/net/ngbe/base/ngbe_phy_rtl.h | 89 ++
drivers/net/ngbe/base/ngbe_phy_yt.c | 272 +++++
drivers/net/ngbe/base/ngbe_phy_yt.h | 76 ++
drivers/net/ngbe/base/ngbe_regs.h | 1490 ++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_status.h | 73 ++
drivers/net/ngbe/base/ngbe_type.h | 204 ++++
drivers/net/ngbe/meson.build | 18 +
drivers/net/ngbe/ngbe_ethdev.c | 1177 +++++++++++++++++++
drivers/net/ngbe/ngbe_ethdev.h | 134 +++
drivers/net/ngbe/ngbe_logs.h | 46 +
drivers/net/ngbe/ngbe_rxtx.c | 1326 +++++++++++++++++++++
drivers/net/ngbe/ngbe_rxtx.h | 302 +++++
drivers/net/ngbe/version.map | 3 +
35 files changed, 8564 insertions(+)
create mode 100644 doc/guides/nics/features/ngbe.ini
create mode 100644 doc/guides/nics/ngbe.rst
create mode 100644 drivers/net/ngbe/base/meson.build
create mode 100644 drivers/net/ngbe/base/ngbe.h
create mode 100644 drivers/net/ngbe/base/ngbe_devids.h
create mode 100644 drivers/net/ngbe/base/ngbe_dummy.h
create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.c
create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.h
create mode 100644 drivers/net/ngbe/base/ngbe_hw.c
create mode 100644 drivers/net/ngbe/base/ngbe_hw.h
create mode 100644 drivers/net/ngbe/base/ngbe_mng.c
create mode 100644 drivers/net/ngbe/base/ngbe_mng.h
create mode 100644 drivers/net/ngbe/base/ngbe_osdep.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_mvl.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_mvl.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_rtl.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_rtl.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_yt.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_yt.h
create mode 100644 drivers/net/ngbe/base/ngbe_regs.h
create mode 100644 drivers/net/ngbe/base/ngbe_status.h
create mode 100644 drivers/net/ngbe/base/ngbe_type.h
create mode 100644 drivers/net/ngbe/meson.build
create mode 100644 drivers/net/ngbe/ngbe_ethdev.c
create mode 100644 drivers/net/ngbe/ngbe_ethdev.h
create mode 100644 drivers/net/ngbe/ngbe_logs.h
create mode 100644 drivers/net/ngbe/ngbe_rxtx.c
create mode 100644 drivers/net/ngbe/ngbe_rxtx.h
create mode 100644 drivers/net/ngbe/version.map
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 01/19] net/ngbe: add build and doc infrastructure
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 02/19] net/ngbe: support probe and remove Jiawen Wu
` (18 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for ngbe PMD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
MAINTAINERS | 6 +++++
doc/guides/nics/features/ngbe.ini | 10 +++++++++
doc/guides/nics/index.rst | 1 +
doc/guides/nics/ngbe.rst | 31 ++++++++++++++++++++++++++
doc/guides/rel_notes/release_21_08.rst | 6 +++++
drivers/net/meson.build | 1 +
drivers/net/ngbe/meson.build | 12 ++++++++++
drivers/net/ngbe/ngbe_ethdev.c | 30 +++++++++++++++++++++++++
drivers/net/ngbe/version.map | 3 +++
9 files changed, 100 insertions(+)
create mode 100644 doc/guides/nics/features/ngbe.ini
create mode 100644 doc/guides/nics/ngbe.rst
create mode 100644 drivers/net/ngbe/meson.build
create mode 100644 drivers/net/ngbe/ngbe_ethdev.c
create mode 100644 drivers/net/ngbe/version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 5877a16971..b3574c9b49 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -896,6 +896,12 @@ F: drivers/net/sfc/
F: doc/guides/nics/sfc_efx.rst
F: doc/guides/nics/features/sfc.ini
+Wangxun ngbe
+M: Jiawen Wu <jiawenwu@trustnetic.com>
+F: drivers/net/ngbe/
+F: doc/guides/nics/ngbe.rst
+F: doc/guides/nics/features/ngbe.ini
+
Wangxun txgbe
M: Jiawen Wu <jiawenwu@trustnetic.com>
M: Jian Wang <jianwang@trustnetic.com>
diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
new file mode 100644
index 0000000000..a7a524defc
--- /dev/null
+++ b/doc/guides/nics/features/ngbe.ini
@@ -0,0 +1,10 @@
+;
+; Supported features of the 'ngbe' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Linux = Y
+ARMv8 = Y
+x86-32 = Y
+x86-64 = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 799697caf0..31a3e6bcdc 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -47,6 +47,7 @@ Network Interface Controller Drivers
netvsc
nfb
nfp
+ ngbe
null
octeontx
octeontx2
diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst
new file mode 100644
index 0000000000..1ab829945e
--- /dev/null
+++ b/doc/guides/nics/ngbe.rst
@@ -0,0 +1,31 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+
+NGBE Poll Mode Driver
+======================
+
+The NGBE PMD (librte_pmd_ngbe) provides poll mode driver support
+for Wangxun 1 Gigabit Ethernet NICs.
+
+
+Prerequisites
+-------------
+
+- Learning about Wangxun 1 Gigabit Ethernet NICs using
+ `<https://www.net-swift.com/a/386.html>`_.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+
+Limitations or Known issues
+---------------------------
+
+Build with ICC is not supported yet.
+Power8, ARMv7 and BSD are not supported yet.
diff --git a/doc/guides/rel_notes/release_21_08.rst b/doc/guides/rel_notes/release_21_08.rst
index a6ecfdf3ce..2deac4f398 100644
--- a/doc/guides/rel_notes/release_21_08.rst
+++ b/doc/guides/rel_notes/release_21_08.rst
@@ -55,6 +55,12 @@ New Features
Also, make sure to start the actual text at the margin.
=======================================================
+* **Added Wangxun ngbe PMD.**
+
+ Added a new PMD driver for Wangxun 1 Gigabit Ethernet NICs.
+
+ See the :doc:`../nics/ngbe` for more details.
+
Removed Items
-------------
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index c8b5ce2980..d6c1751540 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -40,6 +40,7 @@ drivers = [
'netvsc',
'nfb',
'nfp',
+ 'ngbe',
'null',
'octeontx',
'octeontx2',
diff --git a/drivers/net/ngbe/meson.build b/drivers/net/ngbe/meson.build
new file mode 100644
index 0000000000..4a9c973e72
--- /dev/null
+++ b/drivers/net/ngbe/meson.build
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
+sources = files(
+ 'ngbe_ethdev.c',
+)
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
new file mode 100644
index 0000000000..eef9b9b1ff
--- /dev/null
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include <errno.h>
+#include <rte_common.h>
+#include <ethdev_pci.h>
+
+static int
+eth_ngbe_pci_probe(struct rte_pci_driver *pci_drv,
+ struct rte_pci_device *pci_dev)
+{
+ RTE_SET_USED(pci_drv);
+ RTE_SET_USED(pci_dev);
+ return -EINVAL;
+}
+
+static int eth_ngbe_pci_remove(struct rte_pci_device *pci_dev)
+{
+ RTE_SET_USED(pci_dev);
+ return -EINVAL;
+}
+
+static struct rte_pci_driver rte_ngbe_pmd = {
+ .probe = eth_ngbe_pci_probe,
+ .remove = eth_ngbe_pci_remove,
+};
+
+RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
diff --git a/drivers/net/ngbe/version.map b/drivers/net/ngbe/version.map
new file mode 100644
index 0000000000..4a76d1d52d
--- /dev/null
+++ b/drivers/net/ngbe/version.map
@@ -0,0 +1,3 @@
+DPDK_21 {
+ local: *;
+};
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 02/19] net/ngbe: support probe and remove
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-07 13:48 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 03/19] net/ngbe: add log type and error type Jiawen Wu
` (17 subsequent siblings)
19 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Add device IDs for Wangxun 1Gb NICs, map device IDs to register ngbe
PMD. Add basic PCIe ethdev probe and remove.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/features/ngbe.ini | 1 +
drivers/net/ngbe/base/meson.build | 13 +++++
drivers/net/ngbe/base/ngbe_devids.h | 83 +++++++++++++++++++++++++++++
drivers/net/ngbe/meson.build | 5 ++
drivers/net/ngbe/ngbe_ethdev.c | 67 ++++++++++++++++++++---
5 files changed, 163 insertions(+), 6 deletions(-)
create mode 100644 drivers/net/ngbe/base/meson.build
create mode 100644 drivers/net/ngbe/base/ngbe_devids.h
diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
index a7a524defc..977286ac04 100644
--- a/doc/guides/nics/features/ngbe.ini
+++ b/doc/guides/nics/features/ngbe.ini
@@ -4,6 +4,7 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Multiprocess aware = Y
Linux = Y
ARMv8 = Y
x86-32 = Y
diff --git a/drivers/net/ngbe/base/meson.build b/drivers/net/ngbe/base/meson.build
new file mode 100644
index 0000000000..e7616ba210
--- /dev/null
+++ b/drivers/net/ngbe/base/meson.build
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+
+sources = []
+
+error_cflags = []
+
+c_args = cflags
+
+base_lib = static_library('ngbe_base', sources,
+ dependencies: [static_rte_eal, static_rte_ethdev, static_rte_bus_pci],
+ c_args: c_args)
+base_objs = base_lib.extract_all_objects()
diff --git a/drivers/net/ngbe/base/ngbe_devids.h b/drivers/net/ngbe/base/ngbe_devids.h
new file mode 100644
index 0000000000..6010cc050e
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_devids.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#ifndef _NGBE_DEVIDS_H_
+#define _NGBE_DEVIDS_H_
+
+/*
+ * Vendor ID
+ */
+#ifndef PCI_VENDOR_ID_WANGXUN
+#define PCI_VENDOR_ID_WANGXUN 0x8088
+#endif
+
+/*
+ * Device IDs
+ */
+#define NGBE_DEV_ID_EM_VF 0x0110
+#define NGBE_SUB_DEV_ID_EM_VF 0x0110
+#define NGBE_DEV_ID_EM 0x0100
+#define NGBE_SUB_DEV_ID_EM_MVL_RGMII 0x0200
+#define NGBE_SUB_DEV_ID_EM_MVL_SFP 0x0403
+#define NGBE_SUB_DEV_ID_EM_RTL_SGMII 0x0410
+#define NGBE_SUB_DEV_ID_EM_YT8521S_SFP 0x0460
+
+#define NGBE_DEV_ID_EM_WX1860AL_W 0x0100
+#define NGBE_DEV_ID_EM_WX1860AL_W_VF 0x0110
+#define NGBE_DEV_ID_EM_WX1860A2 0x0101
+#define NGBE_DEV_ID_EM_WX1860A2_VF 0x0111
+#define NGBE_DEV_ID_EM_WX1860A2S 0x0102
+#define NGBE_DEV_ID_EM_WX1860A2S_VF 0x0112
+#define NGBE_DEV_ID_EM_WX1860A4 0x0103
+#define NGBE_DEV_ID_EM_WX1860A4_VF 0x0113
+#define NGBE_DEV_ID_EM_WX1860A4S 0x0104
+#define NGBE_DEV_ID_EM_WX1860A4S_VF 0x0114
+#define NGBE_DEV_ID_EM_WX1860AL2 0x0105
+#define NGBE_DEV_ID_EM_WX1860AL2_VF 0x0115
+#define NGBE_DEV_ID_EM_WX1860AL2S 0x0106
+#define NGBE_DEV_ID_EM_WX1860AL2S_VF 0x0116
+#define NGBE_DEV_ID_EM_WX1860AL4 0x0107
+#define NGBE_DEV_ID_EM_WX1860AL4_VF 0x0117
+#define NGBE_DEV_ID_EM_WX1860AL4S 0x0108
+#define NGBE_DEV_ID_EM_WX1860AL4S_VF 0x0118
+#define NGBE_DEV_ID_EM_WX1860NCSI 0x0109
+#define NGBE_DEV_ID_EM_WX1860NCSI_VF 0x0119
+#define NGBE_DEV_ID_EM_WX1860A1 0x010A
+#define NGBE_DEV_ID_EM_WX1860A1_VF 0x011A
+#define NGBE_DEV_ID_EM_WX1860A1L 0x010B
+#define NGBE_DEV_ID_EM_WX1860A1L_VF 0x011B
+#define NGBE_SUB_DEV_ID_EM_ZTE5201_RJ45 0x0100
+#define NGBE_SUB_DEV_ID_EM_SF100F_LP 0x0103
+#define NGBE_SUB_DEV_ID_EM_M88E1512_RJ45 0x0200
+#define NGBE_SUB_DEV_ID_EM_SF100HT 0x0102
+#define NGBE_SUB_DEV_ID_EM_SF200T 0x0201
+#define NGBE_SUB_DEV_ID_EM_SF200HT 0x0202
+#define NGBE_SUB_DEV_ID_EM_SF200T_S 0x0210
+#define NGBE_SUB_DEV_ID_EM_SF200HT_S 0x0220
+#define NGBE_SUB_DEV_ID_EM_SF200HXT 0x0230
+#define NGBE_SUB_DEV_ID_EM_SF400T 0x0401
+#define NGBE_SUB_DEV_ID_EM_SF400HT 0x0402
+#define NGBE_SUB_DEV_ID_EM_M88E1512_SFP 0x0403
+#define NGBE_SUB_DEV_ID_EM_SF400T_S 0x0410
+#define NGBE_SUB_DEV_ID_EM_SF400HT_S 0x0420
+#define NGBE_SUB_DEV_ID_EM_SF400HXT 0x0430
+#define NGBE_SUB_DEV_ID_EM_SF400_OCP 0x0440
+#define NGBE_SUB_DEV_ID_EM_SF400_LY 0x0450
+#define NGBE_SUB_DEV_ID_EM_SF400_LY_YT 0x0470
+
+/* Assign excessive id with masks */
+#define NGBE_INTERNAL_MASK 0x000F
+#define NGBE_OEM_MASK 0x00F0
+#define NGBE_WOL_SUP_MASK 0x4000
+#define NGBE_NCSI_SUP_MASK 0x8000
+
+#define NGBE_INTERNAL_SFP 0x0003
+#define NGBE_OCP_CARD 0x0040
+#define NGBE_LY_M88E1512_SFP 0x0050
+#define NGBE_YT8521S_SFP 0x0060
+#define NGBE_LY_YT8521S_SFP 0x0070
+#define NGBE_WOL_SUP 0x4000
+#define NGBE_NCSI_SUP 0x8000
+
+#endif /* _NGBE_DEVIDS_H_ */
diff --git a/drivers/net/ngbe/meson.build b/drivers/net/ngbe/meson.build
index 4a9c973e72..85349e597c 100644
--- a/drivers/net/ngbe/meson.build
+++ b/drivers/net/ngbe/meson.build
@@ -7,6 +7,11 @@ if is_windows
subdir_done()
endif
+subdir('base')
+objs = [base_objs]
+
sources = files(
'ngbe_ethdev.c',
)
+
+includes += include_directories('base')
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index eef9b9b1ff..919c62a802 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -7,24 +7,79 @@
#include <rte_common.h>
#include <ethdev_pci.h>
+#include "ngbe_devids.h"
+
+/*
+ * The set of PCI devices this driver supports
+ */
+static const struct rte_pci_id pci_id_ngbe_map[] = {
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860A2) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860A2S) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860A4) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860A4S) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860AL2) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860AL2S) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860AL4) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860AL4S) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860NCSI) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860A1) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860A1L) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, NGBE_DEV_ID_EM_WX1860AL_W) },
+ { .vendor_id = 0, /* sentinel */ },
+};
+
static int
-eth_ngbe_pci_probe(struct rte_pci_driver *pci_drv,
- struct rte_pci_device *pci_dev)
+eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
{
- RTE_SET_USED(pci_drv);
- RTE_SET_USED(pci_dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ rte_eth_copy_pci_info(eth_dev, pci_dev);
+
return -EINVAL;
}
-static int eth_ngbe_pci_remove(struct rte_pci_device *pci_dev)
+static int
+eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
{
- RTE_SET_USED(pci_dev);
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ RTE_SET_USED(eth_dev);
+
return -EINVAL;
}
+static int
+eth_ngbe_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *pci_dev)
+{
+ return rte_eth_dev_create(&pci_dev->device, pci_dev->device.name,
+ 0, eth_dev_pci_specific_init, pci_dev,
+ eth_ngbe_dev_init, NULL);
+}
+
+static int eth_ngbe_pci_remove(struct rte_pci_device *pci_dev)
+{
+ struct rte_eth_dev *ethdev;
+
+ ethdev = rte_eth_dev_allocated(pci_dev->device.name);
+ if (ethdev == NULL)
+ return 0;
+
+ return rte_eth_dev_destroy(ethdev, eth_ngbe_dev_uninit);
+}
+
static struct rte_pci_driver rte_ngbe_pmd = {
+ .id_table = pci_id_ngbe_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
.probe = eth_ngbe_pci_probe,
.remove = eth_ngbe_pci_remove,
};
RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
+RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
+RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");
+
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 03/19] net/ngbe: add log type and error type
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 02/19] net/ngbe: support probe and remove Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 04/19] net/ngbe: define registers Jiawen Wu
` (16 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Add log type and error type to trace functions.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/ngbe.rst | 21 +++++++++
drivers/net/ngbe/base/ngbe_status.h | 73 +++++++++++++++++++++++++++++
drivers/net/ngbe/ngbe_ethdev.c | 14 ++++++
drivers/net/ngbe/ngbe_logs.h | 46 ++++++++++++++++++
4 files changed, 154 insertions(+)
create mode 100644 drivers/net/ngbe/base/ngbe_status.h
create mode 100644 drivers/net/ngbe/ngbe_logs.h
diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst
index 1ab829945e..d661b6323d 100644
--- a/doc/guides/nics/ngbe.rst
+++ b/doc/guides/nics/ngbe.rst
@@ -17,6 +17,27 @@ Prerequisites
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+Pre-Installation Configuration
+------------------------------
+
+Dynamic Logging Parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+One may leverage EAL option "--log-level" to change default levels
+for the log types supported by the driver. The option is used with
+an argument typically consisting of two parts separated by a colon.
+
+NGBE PMD provides the following log types available for control:
+
+- ``pmd.net.ngbe.driver`` (default level is **notice**)
+
+ Affects driver-wide messages unrelated to any particular devices.
+
+- ``pmd.net.ngbe.init`` (default level is **notice**)
+
+ Extra logging of the messages during PMD initialization.
+
+
Driver compilation and testing
------------------------------
diff --git a/drivers/net/ngbe/base/ngbe_status.h b/drivers/net/ngbe/base/ngbe_status.h
new file mode 100644
index 0000000000..054f5a5e9c
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_status.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_STATUS_H_
+#define _NGBE_STATUS_H_
+
+/* Error Codes:
+ * common error
+ * module error(simple)
+ * module error(detailed)
+ *
+ * (-256, 256): reserved for non-ngbe defined error code
+ */
+#define TERR_BASE (0x100)
+
+/* WARNING: just for legacy compatibility */
+#define NGBE_NOT_IMPLEMENTED 0x7FFFFFFF
+#define NGBE_ERR_OPS_DUMMY 0x3FFFFFFF
+
+/* Error Codes */
+#define NGBE_ERR_EEPROM -(TERR_BASE + 1)
+#define NGBE_ERR_EEPROM_CHECKSUM -(TERR_BASE + 2)
+#define NGBE_ERR_PHY -(TERR_BASE + 3)
+#define NGBE_ERR_CONFIG -(TERR_BASE + 4)
+#define NGBE_ERR_PARAM -(TERR_BASE + 5)
+#define NGBE_ERR_MAC_TYPE -(TERR_BASE + 6)
+#define NGBE_ERR_UNKNOWN_PHY -(TERR_BASE + 7)
+#define NGBE_ERR_LINK_SETUP -(TERR_BASE + 8)
+#define NGBE_ERR_ADAPTER_STOPPED -(TERR_BASE + 9)
+#define NGBE_ERR_INVALID_MAC_ADDR -(TERR_BASE + 10)
+#define NGBE_ERR_DEVICE_NOT_SUPPORTED -(TERR_BASE + 11)
+#define NGBE_ERR_MASTER_REQUESTS_PENDING -(TERR_BASE + 12)
+#define NGBE_ERR_INVALID_LINK_SETTINGS -(TERR_BASE + 13)
+#define NGBE_ERR_AUTONEG_NOT_COMPLETE -(TERR_BASE + 14)
+#define NGBE_ERR_RESET_FAILED -(TERR_BASE + 15)
+#define NGBE_ERR_SWFW_SYNC -(TERR_BASE + 16)
+#define NGBE_ERR_PHY_ADDR_INVALID -(TERR_BASE + 17)
+#define NGBE_ERR_I2C -(TERR_BASE + 18)
+#define NGBE_ERR_SFP_NOT_SUPPORTED -(TERR_BASE + 19)
+#define NGBE_ERR_SFP_NOT_PRESENT -(TERR_BASE + 20)
+#define NGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -(TERR_BASE + 21)
+#define NGBE_ERR_NO_SAN_ADDR_PTR -(TERR_BASE + 22)
+#define NGBE_ERR_FDIR_REINIT_FAILED -(TERR_BASE + 23)
+#define NGBE_ERR_EEPROM_VERSION -(TERR_BASE + 24)
+#define NGBE_ERR_NO_SPACE -(TERR_BASE + 25)
+#define NGBE_ERR_OVERTEMP -(TERR_BASE + 26)
+#define NGBE_ERR_FC_NOT_NEGOTIATED -(TERR_BASE + 27)
+#define NGBE_ERR_FC_NOT_SUPPORTED -(TERR_BASE + 28)
+#define NGBE_ERR_SFP_SETUP_NOT_COMPLETE -(TERR_BASE + 30)
+#define NGBE_ERR_PBA_SECTION -(TERR_BASE + 31)
+#define NGBE_ERR_INVALID_ARGUMENT -(TERR_BASE + 32)
+#define NGBE_ERR_HOST_INTERFACE_COMMAND -(TERR_BASE + 33)
+#define NGBE_ERR_OUT_OF_MEM -(TERR_BASE + 34)
+#define NGBE_ERR_FEATURE_NOT_SUPPORTED -(TERR_BASE + 36)
+#define NGBE_ERR_EEPROM_PROTECTED_REGION -(TERR_BASE + 37)
+#define NGBE_ERR_FDIR_CMD_INCOMPLETE -(TERR_BASE + 38)
+#define NGBE_ERR_FW_RESP_INVALID -(TERR_BASE + 39)
+#define NGBE_ERR_TOKEN_RETRY -(TERR_BASE + 40)
+#define NGBE_ERR_FLASH_LOADING_FAILED -(TERR_BASE + 41)
+
+#define NGBE_ERR_NOSUPP -(TERR_BASE + 42)
+#define NGBE_ERR_UNDERTEMP -(TERR_BASE + 43)
+#define NGBE_ERR_XPCS_POWER_UP_FAILED -(TERR_BASE + 44)
+#define NGBE_ERR_PHY_INIT_NOT_DONE -(TERR_BASE + 45)
+#define NGBE_ERR_TIMEOUT -(TERR_BASE + 46)
+#define NGBE_ERR_REGISTER -(TERR_BASE + 47)
+#define NGBE_ERR_MNG_ACCESS_FAILED -(TERR_BASE + 49)
+#define NGBE_ERR_PHY_TYPE -(TERR_BASE + 50)
+#define NGBE_ERR_PHY_TIMEOUT -(TERR_BASE + 51)
+
+#endif /* _NGBE_STATUS_H_ */
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 919c62a802..c42b9ada55 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -7,6 +7,7 @@
#include <rte_common.h>
#include <ethdev_pci.h>
+#include "ngbe_logs.h"
#include "ngbe_devids.h"
/*
@@ -33,6 +34,8 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
{
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+ PMD_INIT_FUNC_TRACE();
+
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
@@ -44,6 +47,8 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
static int
eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
{
+ PMD_INIT_FUNC_TRACE();
+
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
@@ -83,3 +88,12 @@ RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");
+RTE_LOG_REGISTER_SUFFIX(ngbe_logtype_init, init, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(ngbe_logtype_driver, driver, NOTICE);
+
+#ifdef RTE_ETHDEV_DEBUG_RX
+ RTE_LOG_REGISTER_SUFFIX(ngbe_logtype_rx, rx, DEBUG);
+#endif
+#ifdef RTE_ETHDEV_DEBUG_TX
+ RTE_LOG_REGISTER_SUFFIX(ngbe_logtype_tx, tx, DEBUG);
+#endif
diff --git a/drivers/net/ngbe/ngbe_logs.h b/drivers/net/ngbe/ngbe_logs.h
new file mode 100644
index 0000000000..fd306419e6
--- /dev/null
+++ b/drivers/net/ngbe/ngbe_logs.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_LOGS_H_
+#define _NGBE_LOGS_H_
+
+/*
+ * PMD_USER_LOG: for user
+ */
+extern int ngbe_logtype_init;
+#define PMD_INIT_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_init, \
+ "%s(): " fmt "\n", __func__, ##args)
+
+extern int ngbe_logtype_driver;
+#define PMD_DRV_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_driver, \
+ "%s(): " fmt "\n", __func__, ##args)
+
+#ifdef RTE_ETHDEV_DEBUG_RX
+extern int ngbe_logtype_rx;
+#define PMD_RX_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_rx, \
+ "%s(): " fmt "\n", __func__, ##args)
+#else
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_ETHDEV_DEBUG_TX
+extern int ngbe_logtype_tx;
+#define PMD_TX_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ngbe_logtype_tx, \
+ "%s(): " fmt "\n", __func__, ##args)
+#else
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#define TLOG_DEBUG(fmt, args...) PMD_DRV_LOG(DEBUG, fmt, ##args)
+
+#define DEBUGOUT(fmt, args...) TLOG_DEBUG(fmt, ##args)
+#define PMD_INIT_FUNC_TRACE() TLOG_DEBUG(" >>")
+#define DEBUGFUNC(fmt) TLOG_DEBUG(fmt)
+
+#endif /* _NGBE_LOGS_H_ */
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 04/19] net/ngbe: define registers
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (2 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 03/19] net/ngbe: add log type and error type Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 05/19] net/ngbe: set MAC type and LAN ID with device initialization Jiawen Wu
` (15 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Define all registers that will be used.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_regs.h | 1490 +++++++++++++++++++++++++++++
1 file changed, 1490 insertions(+)
create mode 100644 drivers/net/ngbe/base/ngbe_regs.h
diff --git a/drivers/net/ngbe/base/ngbe_regs.h b/drivers/net/ngbe/base/ngbe_regs.h
new file mode 100644
index 0000000000..872b008c46
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_regs.h
@@ -0,0 +1,1490 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_REGS_H_
+#define _NGBE_REGS_H_
+
+#define NGBE_PVMBX_QSIZE (16) /* 16*4B */
+#define NGBE_PVMBX_BSIZE (NGBE_PVMBX_QSIZE * 4)
+
+#define NGBE_REMOVED(a) (0)
+
+#define NGBE_REG_DUMMY 0xFFFFFF
+
+#define MS8(shift, mask) (((u8)(mask)) << (shift))
+#define LS8(val, shift, mask) (((u8)(val) & (u8)(mask)) << (shift))
+#define RS8(reg, shift, mask) (((u8)(reg) >> (shift)) & (u8)(mask))
+
+#define MS16(shift, mask) (((u16)(mask)) << (shift))
+#define LS16(val, shift, mask) (((u16)(val) & (u16)(mask)) << (shift))
+#define RS16(reg, shift, mask) (((u16)(reg) >> (shift)) & (u16)(mask))
+
+#define MS32(shift, mask) (((u32)(mask)) << (shift))
+#define LS32(val, shift, mask) (((u32)(val) & (u32)(mask)) << (shift))
+#define RS32(reg, shift, mask) (((u32)(reg) >> (shift)) & (u32)(mask))
+
+#define MS64(shift, mask) (((u64)(mask)) << (shift))
+#define LS64(val, shift, mask) (((u64)(val) & (u64)(mask)) << (shift))
+#define RS64(reg, shift, mask) (((u64)(reg) >> (shift)) & (u64)(mask))
+
+#define MS(shift, mask) MS32(shift, mask)
+#define LS(val, shift, mask) LS32(val, shift, mask)
+#define RS(reg, shift, mask) RS32(reg, shift, mask)
+
+#define ROUND_UP(x, y) (((x) + (y) - 1) / (y) * (y))
+#define ROUND_DOWN(x, y) ((x) / (y) * (y))
+#define ROUND_OVER(x, maxbits, unitbits) \
+ ((x) >= 1 << (maxbits) ? 0 : (x) >> (unitbits))
+
+/* autoc bits definition */
+#define NGBE_AUTOC NGBE_REG_DUMMY
+#define NGBE_AUTOC_FLU MS64(0, 0x1)
+#define NGBE_AUTOC_10G_PMA_PMD_MASK MS64(7, 0x3) /* parallel */
+#define NGBE_AUTOC_10G_XAUI LS64(0, 7, 0x3)
+#define NGBE_AUTOC_10G_KX4 LS64(1, 7, 0x3)
+#define NGBE_AUTOC_10G_CX4 LS64(2, 7, 0x3)
+#define NGBE_AUTOC_10G_KR LS64(3, 7, 0x3) /* fixme */
+#define NGBE_AUTOC_1G_PMA_PMD_MASK MS64(9, 0x7)
+#define NGBE_AUTOC_1G_BX LS64(0, 9, 0x7)
+#define NGBE_AUTOC_1G_KX LS64(1, 9, 0x7)
+#define NGBE_AUTOC_1G_SFI LS64(0, 9, 0x7)
+#define NGBE_AUTOC_1G_KX_BX LS64(1, 9, 0x7)
+#define NGBE_AUTOC_AN_RESTART MS64(12, 0x1)
+#define NGBE_AUTOC_LMS_MASK MS64(13, 0x7)
+#define NGBE_AUTOC_LMS_10G LS64(3, 13, 0x7)
+#define NGBE_AUTOC_LMS_KX4_KX_KR LS64(4, 13, 0x7)
+#define NGBE_AUTOC_LMS_SGMII_1G_100M LS64(5, 13, 0x7)
+#define NGBE_AUTOC_LMS_KX4_KX_KR_1G_AN LS64(6, 13, 0x7)
+#define NGBE_AUTOC_LMS_KX4_KX_KR_SGMII LS64(7, 13, 0x7)
+#define NGBE_AUTOC_LMS_1G_LINK_NO_AN LS64(0, 13, 0x7)
+#define NGBE_AUTOC_LMS_10G_LINK_NO_AN LS64(1, 13, 0x7)
+#define NGBE_AUTOC_LMS_1G_AN LS64(2, 13, 0x7)
+#define NGBE_AUTOC_LMS_KX4_AN LS64(4, 13, 0x7)
+#define NGBE_AUTOC_LMS_KX4_AN_1G_AN LS64(6, 13, 0x7)
+#define NGBE_AUTOC_LMS_ATTACH_TYPE LS64(7, 13, 0x7)
+#define NGBE_AUTOC_LMS_AN MS64(15, 0x7)
+
+#define NGBE_AUTOC_KR_SUPP MS64(16, 0x1)
+#define NGBE_AUTOC_FECR MS64(17, 0x1)
+#define NGBE_AUTOC_FECA MS64(18, 0x1)
+#define NGBE_AUTOC_AN_RX_ALIGN MS64(18, 0x1F) /* fixme */
+#define NGBE_AUTOC_AN_RX_DRIFT MS64(23, 0x3)
+#define NGBE_AUTOC_AN_RX_LOOSE MS64(24, 0x3)
+#define NGBE_AUTOC_PD_TMR MS64(25, 0x3)
+#define NGBE_AUTOC_RF MS64(27, 0x1)
+#define NGBE_AUTOC_ASM_PAUSE MS64(29, 0x1)
+#define NGBE_AUTOC_SYM_PAUSE MS64(28, 0x1)
+#define NGBE_AUTOC_PAUSE MS64(28, 0x3)
+#define NGBE_AUTOC_KX_SUPP MS64(30, 0x1)
+#define NGBE_AUTOC_KX4_SUPP MS64(31, 0x1)
+
+#define NGBE_AUTOC_10GS_PMA_PMD_MASK MS64(48, 0x3) /* serial */
+#define NGBE_AUTOC_10GS_KR LS64(0, 48, 0x3)
+#define NGBE_AUTOC_10GS_XFI LS64(1, 48, 0x3)
+#define NGBE_AUTOC_10GS_SFI LS64(2, 48, 0x3)
+#define NGBE_AUTOC_LINK_DIA_MASK MS64(60, 0x7)
+#define NGBE_AUTOC_LINK_DIA_D3_MASK LS64(5, 60, 0x7)
+
+#define NGBE_AUTOC_SPEED_MASK MS64(32, 0xFFFF)
+#define NGBD_AUTOC_SPEED(r) RS64(r, 32, 0xFFFF)
+#define NGBE_AUTOC_SPEED(v) LS64(v, 32, 0xFFFF)
+#define NGBE_LINK_SPEED_UNKNOWN 0
+#define NGBE_LINK_SPEED_10M_FULL 0x0002
+#define NGBE_LINK_SPEED_100M_FULL 0x0008
+#define NGBE_LINK_SPEED_1GB_FULL 0x0020
+#define NGBE_LINK_SPEED_2_5GB_FULL 0x0400
+#define NGBE_LINK_SPEED_5GB_FULL 0x0800
+#define NGBE_LINK_SPEED_10GB_FULL 0x0080
+#define NGBE_LINK_SPEED_40GB_FULL 0x0100
+#define NGBE_AUTOC_AUTONEG MS64(63, 0x1)
+
+
+
+/* Hardware Datapath:
+ * RX: / Queue <- Filter \
+ * Host | TC <=> SEC <=> MAC <=> PHY
+ * TX: \ Queue -> Filter /
+ *
+ * Packet Filter:
+ * RX: RSS < FDIR < Filter < Encrypt
+ *
+ * Macro Argument Naming:
+ * rp = ring pair [0,127]
+ * tc = traffic class [0,7]
+ * up = user priority [0,7]
+ * pi = pool index [0,63]
+ * r = register
+ * v = value
+ * s = shift
+ * m = mask
+ * i,j,k = array index
+ * H,L = high/low bits
+ * HI,LO = high/low state
+ */
+
+#define NGBE_ETHPHYIF NGBE_REG_DUMMY
+#define NGBE_ETHPHYIF_MDIO_ACT MS(1, 0x1)
+#define NGBE_ETHPHYIF_MDIO_MODE MS(2, 0x1)
+#define NGBE_ETHPHYIF_MDIO_BASE(r) RS(r, 3, 0x1F)
+#define NGBE_ETHPHYIF_MDIO_SHARED MS(13, 0x1)
+#define NGBE_ETHPHYIF_SPEED_10M MS(17, 0x1)
+#define NGBE_ETHPHYIF_SPEED_100M MS(18, 0x1)
+#define NGBE_ETHPHYIF_SPEED_1G MS(19, 0x1)
+#define NGBE_ETHPHYIF_SPEED_2_5G MS(20, 0x1)
+#define NGBE_ETHPHYIF_SPEED_10G MS(21, 0x1)
+#define NGBE_ETHPHYIF_SGMII_ENABLE MS(25, 0x1)
+#define NGBE_ETHPHYIF_INT_PHY_MODE MS(24, 0x1)
+#define NGBE_ETHPHYIF_IO_XPCS MS(30, 0x1)
+#define NGBE_ETHPHYIF_IO_EPHY MS(31, 0x1)
+
+/******************************************************************************
+ * Chip Registers
+ ******************************************************************************/
+/**
+ * Chip Status
+ **/
+#define NGBE_PWR 0x010000
+#define NGBE_PWR_LAN(r) RS(r, 28, 0xC)
+#define NGBE_PWR_LAN_0 (1)
+#define NGBE_PWR_LAN_1 (2)
+#define NGBE_PWR_LAN_2 (3)
+#define NGBE_PWR_LAN_3 (4)
+#define NGBE_CTL 0x010004
+#define NGBE_LOCKPF 0x010008
+#define NGBE_RST 0x01000C
+#define NGBE_RST_SW MS(0, 0x1)
+#define NGBE_RST_LAN(i) MS(((i) + 1), 0x1)
+#define NGBE_RST_FW MS(5, 0x1)
+#define NGBE_RST_ETH(i) MS(((i) + 29), 0x1)
+#define NGBE_RST_GLB MS(31, 0x1)
+#define NGBE_RST_DEFAULT (NGBE_RST_SW | \
+ NGBE_RST_LAN(0) | \
+ NGBE_RST_LAN(1) | \
+ NGBE_RST_LAN(2) | \
+ NGBE_RST_LAN(3))
+#define NGBE_PROB 0x010010
+#define NGBE_IODRV 0x010024
+#define NGBE_STAT 0x010028
+#define NGBE_STAT_MNGINIT MS(0, 0x1)
+#define NGBE_STAT_MNGVETO MS(8, 0x1)
+#define NGBE_STAT_ECCLAN0 MS(16, 0x1)
+#define NGBE_STAT_ECCLAN1 MS(17, 0x1)
+#define NGBE_STAT_ECCLAN2 MS(18, 0x1)
+#define NGBE_STAT_ECCLAN3 MS(19, 0x1)
+#define NGBE_STAT_ECCMNG MS(20, 0x1)
+#define NGBE_STAT_ECCPCORE MS(21, 0X1)
+#define NGBE_STAT_ECCPCIW MS(22, 0x1)
+#define NGBE_STAT_ECCPCIEPHY MS(23, 0x1)
+#define NGBE_STAT_ECCFMGR MS(24, 0x1)
+#define NGBE_STAT_GPHY_IN_RST(i) MS(((i) + 9), 0x1)
+#define NGBE_RSTSTAT 0x010030
+#define NGBE_RSTSTAT_PROG MS(20, 0x1)
+#define NGBE_RSTSTAT_PREP MS(19, 0x1)
+#define NGBE_RSTSTAT_TYPE_MASK MS(16, 0x7)
+#define NGBE_RSTSTAT_TYPE(r) RS(r, 16, 0x7)
+#define NGBE_RSTSTAT_TYPE_PE LS(0, 16, 0x7)
+#define NGBE_RSTSTAT_TYPE_PWR LS(1, 16, 0x7)
+#define NGBE_RSTSTAT_TYPE_HOT LS(2, 16, 0x7)
+#define NGBE_RSTSTAT_TYPE_SW LS(3, 16, 0x7)
+#define NGBE_RSTSTAT_TYPE_FW LS(4, 16, 0x7)
+#define NGBE_RSTSTAT_TMRINIT_MASK MS(8, 0xFF)
+#define NGBE_RSTSTAT_TMRINIT(v) LS(v, 8, 0xFF)
+#define NGBE_RSTSTAT_TMRCNT_MASK MS(0, 0xFF)
+#define NGBE_RSTSTAT_TMRCNT(v) LS(v, 0, 0xFF)
+#define NGBE_PWRTMR 0x010034
+
+/**
+ * SPI(Flash)
+ **/
+#define NGBE_SPICMD 0x010104
+#define NGBE_SPICMD_ADDR(v) LS(v, 0, 0xFFFFFF)
+#define NGBE_SPICMD_CLK(v) LS(v, 25, 0x7)
+#define NGBE_SPICMD_CMD(v) LS(v, 28, 0x7)
+#define NGBE_SPIDAT 0x010108
+#define NGBE_SPIDAT_BYPASS MS(31, 0x1)
+#define NGBE_SPIDAT_STATUS(v) LS(v, 16, 0xFF)
+#define NGBE_SPIDAT_OPDONE MS(0, 0x1)
+#define NGBE_SPISTAT 0x01010C
+#define NGBE_SPISTAT_OPDONE MS(0, 0x1)
+#define NGBE_SPISTAT_BPFLASH MS(31, 0x1)
+#define NGBE_SPIUSRCMD 0x010110
+#define NGBE_SPICFG0 0x010114
+#define NGBE_SPICFG1 0x010118
+
+/* FMGR Registers */
+#define NGBE_ILDRSTAT 0x010120
+#define NGBE_ILDRSTAT_PCIRST MS(0, 0x1)
+#define NGBE_ILDRSTAT_PWRRST MS(1, 0x1)
+#define NGBE_ILDRSTAT_SWRST MS(11, 0x1)
+#define NGBE_ILDRSTAT_SWRST_LAN0 MS(13, 0x1)
+#define NGBE_ILDRSTAT_SWRST_LAN1 MS(14, 0x1)
+#define NGBE_ILDRSTAT_SWRST_LAN2 MS(15, 0x1)
+#define NGBE_ILDRSTAT_SWRST_LAN3 MS(16, 0x1)
+
+#define NGBE_SRAM 0x010124
+#define NGBE_SRAM_SZ(v) LS(v, 28, 0x7)
+#define NGBE_SRAMCTLECC 0x010130
+#define NGBE_SRAMINJECC 0x010134
+#define NGBE_SRAMECC 0x010138
+
+/* Sensors for PVT(Process Voltage Temperature) */
+#define NGBE_TSCTRL 0x010300
+#define NGBE_TSCTRL_EVALMD MS(31, 0x1)
+#define NGBE_TSEN 0x010304
+#define NGBE_TSEN_ENA MS(0, 0x1)
+#define NGBE_TSSTAT 0x010308
+#define NGBE_TSSTAT_VLD MS(16, 0x1)
+#define NGBE_TSSTAT_DATA(r) RS(r, 0, 0x3FF)
+#define NGBE_TSATHRE 0x01030C
+#define NGBE_TSDTHRE 0x010310
+#define NGBE_TSINTR 0x010314
+#define NGBE_TSINTR_AEN MS(0, 0x1)
+#define NGBE_TSINTR_DEN MS(1, 0x1)
+#define NGBE_TSALM 0x010318
+#define NGBE_TSALM_LO MS(0, 0x1)
+#define NGBE_TSALM_HI MS(1, 0x1)
+
+#define NGBE_EFUSE_WDATA0 0x010320
+#define NGBE_EFUSE_WDATA1 0x010324
+#define NGBE_EFUSE_RDATA0 0x010328
+#define NGBE_EFUSE_RDATA1 0x01032C
+#define NGBE_EFUSE_STATUS 0x010330
+
+/******************************************************************************
+ * Port Registers
+ ******************************************************************************/
+/* Internal PHY reg_offset [0,31] */
+#define NGBE_PHY_CONFIG(reg_offset) (0x014000 + (reg_offset) * 4)
+
+/* Port Control */
+#define NGBE_PORTCTL 0x014400
+#define NGBE_PORTCTL_VLANEXT MS(0, 0x1)
+#define NGBE_PORTCTL_ETAG MS(1, 0x1)
+#define NGBE_PORTCTL_QINQ MS(2, 0x1)
+#define NGBE_PORTCTL_DRVLOAD MS(3, 0x1)
+#define NGBE_PORTCTL_NUMVT_MASK MS(12, 0x1)
+#define NGBE_PORTCTL_NUMVT_8 LS(1, 12, 0x1)
+#define NGBE_PORTCTL_RSTDONE MS(14, 0x1)
+#define NGBE_PORTCTL_TEREDODIA MS(27, 0x1)
+#define NGBE_PORTCTL_GENEVEDIA MS(28, 0x1)
+#define NGBE_PORTCTL_VXLANGPEDIA MS(30, 0x1)
+#define NGBE_PORTCTL_VXLANDIA MS(31, 0x1)
+
+/* Port Status */
+#define NGBE_PORTSTAT 0x014404
+#define NGBE_PORTSTAT_BW_MASK MS(1, 0x7)
+#define NGBE_PORTSTAT_BW_1G MS(1, 0x1)
+#define NGBE_PORTSTAT_BW_100M MS(2, 0x1)
+#define NGBE_PORTSTAT_BW_10M MS(3, 0x1)
+#define NGBE_PORTSTAT_ID(r) RS(r, 8, 0x3)
+
+#define NGBE_EXTAG 0x014408
+#define NGBE_EXTAG_ETAG_MASK MS(0, 0xFFFF)
+#define NGBE_EXTAG_ETAG(v) LS(v, 0, 0xFFFF)
+#define NGBE_EXTAG_VLAN_MASK MS(16, 0xFFFF)
+#define NGBE_EXTAG_VLAN(v) LS(v, 16, 0xFFFF)
+
+#define NGBE_TCPTIME 0x014420
+
+#define NGBE_LEDCTL 0x014424
+#define NGBE_LEDCTL_SEL(s) MS((s), 0x1)
+#define NGBE_LEDCTL_OD(s) MS(((s) + 16), 0x1)
+ /* s=1G(1),100M(2),10M(3) */
+#define NGBE_LEDCTL_100M (NGBE_LEDCTL_SEL(2) | NGBE_LEDCTL_OD(2))
+
+#define NGBE_TAGTPID(i) (0x014430 + (i) * 4) /*0-3*/
+#define NGBE_TAGTPID_LSB_MASK MS(0, 0xFFFF)
+#define NGBE_TAGTPID_LSB(v) LS(v, 0, 0xFFFF)
+#define NGBE_TAGTPID_MSB_MASK MS(16, 0xFFFF)
+#define NGBE_TAGTPID_MSB(v) LS(v, 16, 0xFFFF)
+
+#define NGBE_LAN_SPEED 0x014440
+#define NGBE_LAN_SPEED_MASK MS(0, 0x3)
+
+/* GPIO Registers */
+#define NGBE_GPIODATA 0x014800
+#define NGBE_GPIOBIT_0 MS(0, 0x1) /* O:tx fault */
+#define NGBE_GPIOBIT_1 MS(1, 0x1) /* O:tx disabled */
+#define NGBE_GPIOBIT_2 MS(2, 0x1) /* I:sfp module absent */
+#define NGBE_GPIOBIT_3 MS(3, 0x1) /* I:rx signal lost */
+#define NGBE_GPIOBIT_4 MS(4, 0x1) /* O:rate select, 1G(0) 10G(1) */
+#define NGBE_GPIOBIT_5 MS(5, 0x1) /* O:rate select, 1G(0) 10G(1) */
+#define NGBE_GPIOBIT_6 MS(6, 0x1) /* I:ext phy interrupt */
+#define NGBE_GPIOBIT_7 MS(7, 0x1) /* I:fan speed alarm */
+#define NGBE_GPIODIR 0x014804
+#define NGBE_GPIODIR_DDR(v) LS(v, 0, 0x3)
+#define NGBE_GPIOCTL 0x014808
+#define NGBE_GPIOINTEN 0x014830
+#define NGBE_GPIOINTEN_INT(v) LS(v, 0, 0x3)
+#define NGBE_GPIOINTMASK 0x014834
+#define NGBE_GPIOINTTYPE 0x014838
+#define NGBE_GPIOINTTYPE_LEVEL(v) LS(v, 0, 0x3)
+#define NGBE_GPIOINTPOL 0x01483C
+#define NGBE_GPIOINTPOL_ACT(v) LS(v, 0, 0x3)
+#define NGBE_GPIOINTSTAT 0x014840
+#define NGBE_GPIOINTDB 0x014848
+#define NGBE_GPIOEOI 0x01484C
+#define NGBE_GPIODAT 0x014850
+
+/* TPH */
+#define NGBE_TPHCFG 0x014F00
+
+/******************************************************************************
+ * Transmit DMA Registers
+ ******************************************************************************/
+/* TDMA Control */
+#define NGBE_DMATXCTRL 0x018000
+#define NGBE_DMATXCTRL_ENA MS(0, 0x1)
+#define NGBE_DMATXCTRL_TPID_MASK MS(16, 0xFFFF)
+#define NGBE_DMATXCTRL_TPID(v) LS(v, 16, 0xFFFF)
+#define NGBE_POOLTXENA(i) (0x018004 + (i) * 4) /*0*/
+#define NGBE_PRBTXDMACTL 0x018010
+#define NGBE_ECCTXDMACTL 0x018014
+#define NGBE_ECCTXDMAINJ 0x018018
+#define NGBE_ECCTXDMA 0x01801C
+#define NGBE_PBTXDMATH 0x018020
+#define NGBE_QPTXLLI 0x018040
+#define NGBE_POOLTXLBET 0x018050
+#define NGBE_POOLTXASET 0x018058
+#define NGBE_POOLTXASMAC 0x018060
+#define NGBE_POOLTXASVLAN 0x018070
+#define NGBE_POOLTXDSA 0x0180A0
+#define NGBE_POOLTAG(pl) (0x018100 + (pl) * 4) /*0-7*/
+#define NGBE_POOLTAG_VTAG(v) LS(v, 0, 0xFFFF)
+#define NGBE_POOLTAG_VTAG_MASK MS(0, 0xFFFF)
+#define TXGBD_POOLTAG_VTAG_UP(r) RS(r, 13, 0x7)
+#define NGBE_POOLTAG_TPIDSEL(v) LS(v, 24, 0x7)
+#define NGBE_POOLTAG_ETAG_MASK MS(27, 0x3)
+#define NGBE_POOLTAG_ETAG LS(2, 27, 0x3)
+#define NGBE_POOLTAG_ACT_MASK MS(30, 0x3)
+#define NGBE_POOLTAG_ACT_ALWAYS LS(1, 30, 0x3)
+#define NGBE_POOLTAG_ACT_NEVER LS(2, 30, 0x3)
+
+/* Queue Arbiter(QoS) */
+#define NGBE_QARBTXCTL 0x018200
+#define NGBE_QARBTXCTL_DA MS(6, 0x1)
+#define NGBE_QARBTXRATE 0x018404
+#define NGBE_QARBTXRATE_MIN(v) LS(v, 0, 0x3FFF)
+#define NGBE_QARBTXRATE_MAX(v) LS(v, 16, 0x3FFF)
+
+/* ETAG */
+#define NGBE_POOLETAG(pl) (0x018700 + (pl) * 4)
+
+/******************************************************************************
+ * Receive DMA Registers
+ ******************************************************************************/
+/* Receive Control */
+#define NGBE_ARBRXCTL 0x012000
+#define NGBE_ARBRXCTL_DIA MS(6, 0x1)
+#define NGBE_POOLRXENA(i) (0x012004 + (i) * 4) /*0*/
+#define NGBE_PRBRDMA 0x012010
+#define NGBE_ECCRXDMACTL 0x012014
+#define NGBE_ECCRXDMAINJ 0x012018
+#define NGBE_ECCRXDMA 0x01201C
+#define NGBE_POOLRXDNA 0x0120A0
+#define NGBE_QPRXDROP 0x012080
+#define NGBE_QPRXSTRPVLAN 0x012090
+
+/******************************************************************************
+ * Packet Buffer
+ ******************************************************************************/
+/* Flow Control */
+#define NGBE_FCXOFFTM 0x019200
+#define NGBE_FCWTRLO 0x019220
+#define NGBE_FCWTRLO_TH(v) LS(v, 10, 0x1FF) /*KB*/
+#define NGBE_FCWTRLO_XON MS(31, 0x1)
+#define NGBE_FCWTRHI 0x019260
+#define NGBE_FCWTRHI_TH(v) LS(v, 10, 0x1FF) /*KB*/
+#define NGBE_FCWTRHI_XOFF MS(31, 0x1)
+#define NGBE_RXFCRFSH 0x0192A0
+#define NGBE_RXFCFSH_TIME(v) LS(v, 0, 0xFFFF)
+#define NGBE_FCSTAT 0x01CE00
+#define NGBE_FCSTAT_DLNK MS(0, 0x1)
+#define NGBE_FCSTAT_ULNK MS(8, 0x1)
+
+#define NGBE_RXFCCFG 0x011090
+#define NGBE_RXFCCFG_FC MS(0, 0x1)
+#define NGBE_TXFCCFG 0x0192A4
+#define NGBE_TXFCCFG_FC MS(3, 0x1)
+
+/* Data Buffer */
+#define NGBE_PBRXCTL 0x019000
+#define NGBE_PBRXCTL_ST MS(0, 0x1)
+#define NGBE_PBRXCTL_ENA MS(31, 0x1)
+#define NGBE_PBRXSTAT 0x019004
+#define NGBE_PBRXSIZE 0x019020
+#define NGBE_PBRXSIZE_KB(v) LS(v, 10, 0x3F)
+
+#define NGBE_PBRXOFTMR 0x019094
+#define NGBE_PBRXDBGCMD 0x019090
+#define NGBE_PBRXDBGDAT 0x0190A0
+
+#define NGBE_PBTXSIZE 0x01CC00
+
+/* LLI */
+#define NGBE_PBRXLLI 0x19080
+#define NGBE_PBRXLLI_SZLT(v) LS(v, 0, 0xFFF)
+#define NGBE_PBRXLLI_UPLT(v) LS(v, 16, 0x7)
+#define NGBE_PBRXLLI_UPEA MS(19, 0x1)
+
+/* Port Arbiter(QoS) */
+#define NGBE_PARBTXCTL 0x01CD00
+#define NGBE_PARBTXCTL_DA MS(6, 0x1)
+
+/******************************************************************************
+ * Packet Filter (L2-7)
+ ******************************************************************************/
+/**
+ * Receive Scaling
+ **/
+#define NGBE_POOLRSS(pl) (0x019300 + (pl) * 4) /*0-7*/
+#define NGBE_POOLRSS_L4HDR MS(1, 0x1)
+#define NGBE_POOLRSS_L3HDR MS(2, 0x1)
+#define NGBE_POOLRSS_L2HDR MS(3, 0x1)
+#define NGBE_POOLRSS_L2TUN MS(4, 0x1)
+#define NGBE_POOLRSS_TUNHDR MS(5, 0x1)
+#define NGBE_RSSTBL(i) (0x019400 + (i) * 4) /*32*/
+#define NGBE_RSSKEY(i) (0x019480 + (i) * 4) /*10*/
+#define NGBE_RACTL 0x0194F4
+#define NGBE_RACTL_RSSENA MS(2, 0x1)
+#define NGBE_RACTL_RSSMASK MS(16, 0xFFFF)
+#define NGBE_RACTL_RSSIPV4TCP MS(16, 0x1)
+#define NGBE_RACTL_RSSIPV4 MS(17, 0x1)
+#define NGBE_RACTL_RSSIPV6 MS(20, 0x1)
+#define NGBE_RACTL_RSSIPV6TCP MS(21, 0x1)
+#define NGBE_RACTL_RSSIPV4UDP MS(22, 0x1)
+#define NGBE_RACTL_RSSIPV6UDP MS(23, 0x1)
+
+/**
+ * Flow Director
+ **/
+#define PERFECT_BUCKET_64KB_HASH_MASK 0x07FF /* 11 bits */
+#define PERFECT_BUCKET_128KB_HASH_MASK 0x0FFF /* 12 bits */
+#define PERFECT_BUCKET_256KB_HASH_MASK 0x1FFF /* 13 bits */
+#define SIG_BUCKET_64KB_HASH_MASK 0x1FFF /* 13 bits */
+#define SIG_BUCKET_128KB_HASH_MASK 0x3FFF /* 14 bits */
+#define SIG_BUCKET_256KB_HASH_MASK 0x7FFF /* 15 bits */
+
+/**
+ * 5-tuple Filter
+ **/
+#define NGBE_5TFPORT(i) (0x019A00 + (i) * 4) /*0-7*/
+#define NGBE_5TFPORT_SRC(v) LS(v, 0, 0xFFFF)
+#define NGBE_5TFPORT_DST(v) LS(v, 16, 0xFFFF)
+#define NGBE_5TFCTL0(i) (0x019C00 + (i) * 4) /*0-7*/
+#define NGBE_5TFCTL0_PROTO(v) LS(v, 0, 0x3)
+enum ngbe_5tuple_protocol {
+ NGBE_5TF_PROT_TCP = 0,
+ NGBE_5TF_PROT_UDP,
+ NGBE_5TF_PROT_SCTP,
+ NGBE_5TF_PROT_NONE,
+};
+#define NGBE_5TFCTL0_PRI(v) LS(v, 2, 0x7)
+#define NGBE_5TFCTL0_POOL(v) LS(v, 8, 0x7)
+#define NGBE_5TFCTL0_MASK MS(27, 0xF)
+#define NGBE_5TFCTL0_MSPORT MS(27, 0x1)
+#define NGBE_5TFCTL0_MDPORT MS(28, 0x1)
+#define NGBE_5TFCTL0_MPROTO MS(29, 0x1)
+#define NGBE_5TFCTL0_MPOOL MS(30, 0x1)
+#define NGBE_5TFCTL0_ENA MS(31, 0x1)
+#define NGBE_5TFCTL1(i) (0x019E00 + (i) * 4) /*0-7*/
+#define NGBE_5TFCTL1_CHKSZ MS(12, 0x1)
+#define NGBE_5TFCTL1_LLI MS(20, 0x1)
+#define NGBE_5TFCTL1_QP(v) LS(v, 21, 0x7)
+
+/**
+ * Storm Control
+ **/
+#define NGBE_STRMCTL 0x015004
+#define NGBE_STRMCTL_MCPNSH MS(0, 0x1)
+#define NGBE_STRMCTL_MCDROP MS(1, 0x1)
+#define NGBE_STRMCTL_BCPNSH MS(2, 0x1)
+#define NGBE_STRMCTL_BCDROP MS(3, 0x1)
+#define NGBE_STRMCTL_DFTPOOL MS(4, 0x1)
+#define NGBE_STRMCTL_ITVL(v) LS(v, 8, 0x3FF)
+#define NGBE_STRMTH 0x015008
+#define NGBE_STRMTH_MC(v) LS(v, 0, 0xFFFF)
+#define NGBE_STRMTH_BC(v) LS(v, 16, 0xFFFF)
+
+/******************************************************************************
+ * Ether Flow
+ ******************************************************************************/
+#define NGBE_PSRCTL 0x015000
+#define NGBE_PSRCTL_TPE MS(4, 0x1)
+#define NGBE_PSRCTL_ADHF12_MASK MS(5, 0x3)
+#define NGBE_PSRCTL_ADHF12(v) LS(v, 5, 0x3)
+#define NGBE_PSRCTL_UCHFENA MS(7, 0x1)
+#define NGBE_PSRCTL_MCHFENA MS(7, 0x1)
+#define NGBE_PSRCTL_MCP MS(8, 0x1)
+#define NGBE_PSRCTL_UCP MS(9, 0x1)
+#define NGBE_PSRCTL_BCA MS(10, 0x1)
+#define NGBE_PSRCTL_L4CSUM MS(12, 0x1)
+#define NGBE_PSRCTL_PCSD MS(13, 0x1)
+#define NGBE_PSRCTL_LBENA MS(18, 0x1)
+#define NGBE_FRMSZ 0x015020
+#define NGBE_FRMSZ_MAX_MASK MS(0, 0xFFFF)
+#define NGBE_FRMSZ_MAX(v) LS(v, 0, 0xFFFF)
+#define NGBE_VLANCTL 0x015088
+#define NGBE_VLANCTL_TPID_MASK MS(0, 0xFFFF)
+#define NGBE_VLANCTL_TPID(v) LS(v, 0, 0xFFFF)
+#define NGBE_VLANCTL_CFI MS(28, 0x1)
+#define NGBE_VLANCTL_CFIENA MS(29, 0x1)
+#define NGBE_VLANCTL_VFE MS(30, 0x1)
+#define NGBE_POOLCTL 0x0151B0
+#define NGBE_POOLCTL_DEFDSA MS(29, 0x1)
+#define NGBE_POOLCTL_RPLEN MS(30, 0x1)
+#define NGBE_POOLCTL_MODE_MASK MS(16, 0x3)
+#define NGBE_PSRPOOL_MODE_MAC LS(0, 16, 0x3)
+#define NGBE_PSRPOOL_MODE_ETAG LS(1, 16, 0x3)
+#define NGBE_POOLCTL_DEFPL(v) LS(v, 7, 0x7)
+#define NGBE_POOLCTL_DEFPL_MASK MS(7, 0x7)
+
+#define NGBE_ETFLT(i) (0x015128 + (i) * 4) /*0-7*/
+#define NGBE_ETFLT_ETID(v) LS(v, 0, 0xFFFF)
+#define NGBE_ETFLT_ETID_MASK MS(0, 0xFFFF)
+#define NGBE_ETFLT_POOL(v) LS(v, 20, 0x7)
+#define NGBE_ETFLT_POOLENA MS(26, 0x1)
+#define NGBE_ETFLT_TXAS MS(29, 0x1)
+#define NGBE_ETFLT_1588 MS(30, 0x1)
+#define NGBE_ETFLT_ENA MS(31, 0x1)
+#define NGBE_ETCLS(i) (0x019100 + (i) * 4) /*0-7*/
+#define NGBE_ETCLS_QPID(v) LS(v, 16, 0x7)
+#define NGBD_ETCLS_QPID(r) RS(r, 16, 0x7)
+#define NGBE_ETCLS_LLI MS(29, 0x1)
+#define NGBE_ETCLS_QENA MS(31, 0x1)
+#define NGBE_SYNCLS 0x019130
+#define NGBE_SYNCLS_ENA MS(0, 0x1)
+#define NGBE_SYNCLS_QPID(v) LS(v, 1, 0x7)
+#define NGBD_SYNCLS_QPID(r) RS(r, 1, 0x7)
+#define NGBE_SYNCLS_QPID_MASK MS(1, 0x7)
+#define NGBE_SYNCLS_HIPRIO MS(31, 0x1)
+
+/* MAC & VLAN & NVE */
+#define NGBE_PSRVLANIDX 0x016230 /*0-31*/
+#define NGBE_PSRVLAN 0x016220
+#define NGBE_PSRVLAN_VID(v) LS(v, 0, 0xFFF)
+#define NGBE_PSRVLAN_EA MS(31, 0x1)
+#define NGBE_PSRVLANPLM(i) (0x016224 + (i) * 4) /*0-1*/
+
+/**
+ * Mirror Rules
+ **/
+#define NGBE_MIRRCTL(i) (0x015B00 + (i) * 4)
+#define NGBE_MIRRCTL_POOL MS(0, 0x1)
+#define NGBE_MIRRCTL_UPLINK MS(1, 0x1)
+#define NGBE_MIRRCTL_DNLINK MS(2, 0x1)
+#define NGBE_MIRRCTL_VLAN MS(3, 0x1)
+#define NGBE_MIRRCTL_DESTP(v) LS(v, 8, 0x7)
+#define NGBE_MIRRVLANL(i) (0x015B10 + (i) * 8)
+#define NGBE_MIRRPOOLL(i) (0x015B30 + (i) * 8)
+
+/**
+ * Time Stamp
+ **/
+#define NGBE_TSRXCTL 0x015188
+#define NGBE_TSRXCTL_VLD MS(0, 0x1)
+#define NGBE_TSRXCTL_TYPE(v) LS(v, 1, 0x7)
+#define NGBE_TSRXCTL_TYPE_V2L2 (0)
+#define NGBE_TSRXCTL_TYPE_V1L4 (1)
+#define NGBE_TSRXCTL_TYPE_V2L24 (2)
+#define NGBE_TSRXCTL_TYPE_V2EVENT (5)
+#define NGBE_TSRXCTL_ENA MS(4, 0x1)
+#define NGBE_TSRXSTMPL 0x0151E8
+#define NGBE_TSRXSTMPH 0x0151A4
+#define NGBE_TSTXCTL 0x011F00
+#define NGBE_TSTXCTL_VLD MS(0, 0x1)
+#define NGBE_TSTXCTL_ENA MS(4, 0x1)
+#define NGBE_TSTXSTMPL 0x011F04
+#define NGBE_TSTXSTMPH 0x011F08
+#define NGBE_TSTIMEL 0x011F0C
+#define NGBE_TSTIMEH 0x011F10
+#define NGBE_TSTIMEINC 0x011F14
+#define NGBE_TSTIMEINC_IV(v) LS(v, 0, 0x7FFFFFF)
+
+/**
+ * Wake on Lan
+ **/
+#define NGBE_WOLCTL 0x015B80
+#define NGBE_WOLIPCTL 0x015B84
+#define NGBE_WOLIP4(i) (0x015BC0 + (i) * 4) /* 0-3 */
+#define NGBE_WOLIP6(i) (0x015BE0 + (i) * 4) /* 0-3 */
+
+#define NGBE_WOLFLEXCTL 0x015CFC
+#define NGBE_WOLFLEXI 0x015B8C
+#define NGBE_WOLFLEXDAT(i) (0x015C00 + (i) * 16) /* 0-15 */
+#define NGBE_WOLFLEXMSK(i) (0x015C08 + (i) * 16) /* 0-15 */
+
+/******************************************************************************
+ * Security Registers
+ ******************************************************************************/
+#define NGBE_SECRXCTL 0x017000
+#define NGBE_SECRXCTL_ODSA MS(0, 0x1)
+#define NGBE_SECRXCTL_XDSA MS(1, 0x1)
+#define NGBE_SECRXCTL_CRCSTRIP MS(2, 0x1)
+#define NGBE_SECRXCTL_SAVEBAD MS(6, 0x1)
+#define NGBE_SECRXSTAT 0x017004
+#define NGBE_SECRXSTAT_RDY MS(0, 0x1)
+#define NGBE_SECRXSTAT_ECC MS(1, 0x1)
+
+#define NGBE_SECTXCTL 0x01D000
+#define NGBE_SECTXCTL_ODSA MS(0, 0x1)
+#define NGBE_SECTXCTL_XDSA MS(1, 0x1)
+#define NGBE_SECTXCTL_STFWD MS(2, 0x1)
+#define NGBE_SECTXCTL_MSKIV MS(3, 0x1)
+#define NGBE_SECTXSTAT 0x01D004
+#define NGBE_SECTXSTAT_RDY MS(0, 0x1)
+#define NGBE_SECTXSTAT_ECC MS(1, 0x1)
+#define NGBE_SECTXBUFAF 0x01D008
+#define NGBE_SECTXBUFAE 0x01D00C
+#define NGBE_SECTXIFG 0x01D020
+#define NGBE_SECTXIFG_MIN(v) LS(v, 0, 0xF)
+#define NGBE_SECTXIFG_MIN_MASK MS(0, 0xF)
+
+/**
+ * LinkSec
+ **/
+#define NGBE_LSECRXCAP 0x017200
+#define NGBE_LSECRXCTL 0x017204
+ /* disabled(0),check(1),strict(2),drop(3) */
+#define NGBE_LSECRXCTL_MODE_MASK MS(2, 0x3)
+#define NGBE_LSECRXCTL_MODE_STRICT LS(2, 2, 0x3)
+#define NGBE_LSECRXCTL_POSTHDR MS(6, 0x1)
+#define NGBE_LSECRXCTL_REPLAY MS(7, 0x1)
+#define NGBE_LSECRXSCIL 0x017208
+#define NGBE_LSECRXSCIH 0x01720C
+#define NGBE_LSECRXSA(i) (0x017210 + (i) * 4) /* 0-1 */
+#define NGBE_LSECRXPN(i) (0x017218 + (i) * 4) /* 0-1 */
+#define NGBE_LSECRXKEY(n, i) (0x017220 + 0x10 * (n) + 4 * (i)) /*0-3*/
+#define NGBE_LSECTXCAP 0x01D200
+#define NGBE_LSECTXCTL 0x01D204
+ /* disabled(0), auth(1), auth+encrypt(2) */
+#define NGBE_LSECTXCTL_MODE_MASK MS(0, 0x3)
+#define NGBE_LSECTXCTL_MODE_AUTH LS(1, 0, 0x3)
+#define NGBE_LSECTXCTL_MODE_AENC LS(2, 0, 0x3)
+#define NGBE_LSECTXCTL_PNTRH_MASK MS(8, 0xFFFFFF)
+#define NGBE_LSECTXCTL_PNTRH(v) LS(v, 8, 0xFFFFFF)
+#define NGBE_LSECTXSCIL 0x01D208
+#define NGBE_LSECTXSCIH 0x01D20C
+#define NGBE_LSECTXSA 0x01D210
+#define NGBE_LSECTXPN0 0x01D214
+#define NGBE_LSECTXPN1 0x01D218
+#define NGBE_LSECTXKEY0(i) (0x01D21C + (i) * 4) /* 0-3 */
+#define NGBE_LSECTXKEY1(i) (0x01D22C + (i) * 4) /* 0-3 */
+
+#define NGBE_LSECRX_UTPKT 0x017240
+#define NGBE_LSECRX_DECOCT 0x017244
+#define NGBE_LSECRX_VLDOCT 0x017248
+#define NGBE_LSECRX_BTPKT 0x01724C
+#define NGBE_LSECRX_NOSCIPKT 0x017250
+#define NGBE_LSECRX_UNSCIPKT 0x017254
+#define NGBE_LSECRX_UNCHKPKT 0x017258
+#define NGBE_LSECRX_DLYPKT 0x01725C
+#define NGBE_LSECRX_LATEPKT 0x017260
+#define NGBE_LSECRX_OKPKT(i) (0x017264 + (i) * 4) /* 0-1 */
+#define NGBE_LSECRX_BADPKT(i) (0x01726C + (i) * 4) /* 0-1 */
+#define NGBE_LSECRX_INVPKT(i) (0x017274 + (i) * 4) /* 0-1 */
+#define NGBE_LSECRX_BADSAPKT(i) (0x01727C + (i) * 8) /* 0-3 */
+#define NGBE_LSECRX_INVSAPKT(i) (0x017280 + (i) * 8) /* 0-3 */
+#define NGBE_LSECTX_UTPKT 0x01D23C
+#define NGBE_LSECTX_ENCPKT 0x01D240
+#define NGBE_LSECTX_PROTPKT 0x01D244
+#define NGBE_LSECTX_ENCOCT 0x01D248
+#define NGBE_LSECTX_PROTOCT 0x01D24C
+
+/******************************************************************************
+ * MAC Registers
+ ******************************************************************************/
+#define NGBE_MACRXCFG 0x011004
+#define NGBE_MACRXCFG_ENA MS(0, 0x1)
+#define NGBE_MACRXCFG_JUMBO MS(8, 0x1)
+#define NGBE_MACRXCFG_LB MS(10, 0x1)
+#define NGBE_MACCNTCTL 0x011800
+#define NGBE_MACCNTCTL_RC MS(2, 0x1)
+
+#define NGBE_MACRXFLT 0x011008
+#define NGBE_MACRXFLT_PROMISC MS(0, 0x1)
+#define NGBE_MACRXFLT_CTL_MASK MS(6, 0x3)
+#define NGBE_MACRXFLT_CTL_DROP LS(0, 6, 0x3)
+#define NGBE_MACRXFLT_CTL_NOPS LS(1, 6, 0x3)
+#define NGBE_MACRXFLT_CTL_NOFT LS(2, 6, 0x3)
+#define NGBE_MACRXFLT_CTL_PASS LS(3, 6, 0x3)
+#define NGBE_MACRXFLT_RXALL MS(31, 0x1)
+
+/******************************************************************************
+ * Statistic Registers
+ ******************************************************************************/
+/* Ring Counter */
+#define NGBE_QPRXPKT(rp) (0x001014 + 0x40 * (rp))
+#define NGBE_QPRXOCTL(rp) (0x001018 + 0x40 * (rp))
+#define NGBE_QPRXOCTH(rp) (0x00101C + 0x40 * (rp))
+#define NGBE_QPRXMPKT(rp) (0x001020 + 0x40 * (rp))
+#define NGBE_QPRXBPKT(rp) (0x001024 + 0x40 * (rp))
+#define NGBE_QPTXPKT(rp) (0x003014 + 0x40 * (rp))
+#define NGBE_QPTXOCTL(rp) (0x003018 + 0x40 * (rp))
+#define NGBE_QPTXOCTH(rp) (0x00301C + 0x40 * (rp))
+#define NGBE_QPTXMPKT(rp) (0x003020 + 0x40 * (rp))
+#define NGBE_QPTXBPKT(rp) (0x003024 + 0x40 * (rp))
+
+/* TDMA Counter */
+#define NGBE_DMATXDROP 0x018300
+#define NGBE_DMATXSECDROP 0x018304
+#define NGBE_DMATXPKT 0x018308
+#define NGBE_DMATXOCTL 0x01830C
+#define NGBE_DMATXOCTH 0x018310
+#define NGBE_DMATXMNG 0x018314
+
+/* RDMA Counter */
+#define NGBE_DMARXDROP 0x012500
+#define NGBE_DMARXPKT 0x012504
+#define NGBE_DMARXOCTL 0x012508
+#define NGBE_DMARXOCTH 0x01250C
+#define NGBE_DMARXMNG 0x012510
+
+/* Packet Buffer Counter */
+#define NGBE_PBRXMISS 0x019040
+#define NGBE_PBRXPKT 0x019060
+#define NGBE_PBRXREP 0x019064
+#define NGBE_PBRXDROP 0x019068
+#define NGBE_PBLBSTAT 0x01906C
+#define NGBE_PBLBSTAT_FREE(r) RS(r, 0, 0x3FF)
+#define NGBE_PBLBSTAT_FULL MS(11, 0x1)
+#define NGBE_PBRXWRPTR 0x019180
+#define NGBE_PBRXWRPTR_HEAD(r) RS(r, 0, 0xFFFF)
+#define NGBE_PBRXWRPTR_TAIL(r) RS(r, 16, 0xFFFF)
+#define NGBE_PBRXRDPTR 0x0191A0
+#define NGBE_PBRXRDPTR_HEAD(r) RS(r, 0, 0xFFFF)
+#define NGBE_PBRXRDPTR_TAIL(r) RS(r, 16, 0xFFFF)
+#define NGBE_PBRXDATA 0x0191C0
+#define NGBE_PBRXDATA_RDPTR(r) RS(r, 0, 0xFFFF)
+#define NGBE_PBRXDATA_WRPTR(r) RS(r, 16, 0xFFFF)
+#define NGBE_PBRX_USDSP 0x0191E0
+#define NGBE_RXPBPFCDMACL 0x019210
+#define NGBE_RXPBPFCDMACH 0x019214
+#define NGBE_PBTXLNKXOFF 0x019218
+#define NGBE_PBTXLNKXON 0x01921C
+
+#define NGBE_PBTXSTAT 0x01C004
+#define NGBE_PBTXSTAT_EMPT(tc, r) ((1 << (tc) & (r)) >> (tc))
+
+#define NGBE_PBRXLNKXOFF 0x011988
+#define NGBE_PBRXLNKXON 0x011E0C
+
+#define NGBE_PBLPBK 0x01CF08
+
+/* Ether Flow Counter */
+#define NGBE_LANPKTDROP 0x0151C0
+#define NGBE_MNGPKTDROP 0x0151C4
+
+#define NGBE_PSRLANPKTCNT 0x0151B8
+#define NGBE_PSRMNGPKTCNT 0x0151BC
+
+/* MAC Counter */
+#define NGBE_MACRXERRCRCL 0x011928
+#define NGBE_MACRXERRCRCH 0x01192C
+#define NGBE_MACRXERRLENL 0x011978
+#define NGBE_MACRXERRLENH 0x01197C
+#define NGBE_MACRX1TO64L 0x001940
+#define NGBE_MACRX1TO64H 0x001944
+#define NGBE_MACRX65TO127L 0x001948
+#define NGBE_MACRX65TO127H 0x00194C
+#define NGBE_MACRX128TO255L 0x001950
+#define NGBE_MACRX128TO255H 0x001954
+#define NGBE_MACRX256TO511L 0x001958
+#define NGBE_MACRX256TO511H 0x00195C
+#define NGBE_MACRX512TO1023L 0x001960
+#define NGBE_MACRX512TO1023H 0x001964
+#define NGBE_MACRX1024TOMAXL 0x001968
+#define NGBE_MACRX1024TOMAXH 0x00196C
+#define NGBE_MACTX1TO64L 0x001834
+#define NGBE_MACTX1TO64H 0x001838
+#define NGBE_MACTX65TO127L 0x00183C
+#define NGBE_MACTX65TO127H 0x001840
+#define NGBE_MACTX128TO255L 0x001844
+#define NGBE_MACTX128TO255H 0x001848
+#define NGBE_MACTX256TO511L 0x00184C
+#define NGBE_MACTX256TO511H 0x001850
+#define NGBE_MACTX512TO1023L 0x001854
+#define NGBE_MACTX512TO1023H 0x001858
+#define NGBE_MACTX1024TOMAXL 0x00185C
+#define NGBE_MACTX1024TOMAXH 0x001860
+
+#define NGBE_MACRXUNDERSIZE 0x011938
+#define NGBE_MACRXOVERSIZE 0x01193C
+#define NGBE_MACRXJABBER 0x011934
+
+#define NGBE_MACRXPKTL 0x011900
+#define NGBE_MACRXPKTH 0x011904
+#define NGBE_MACTXPKTL 0x01181C
+#define NGBE_MACTXPKTH 0x011820
+#define NGBE_MACRXGBOCTL 0x011908
+#define NGBE_MACRXGBOCTH 0x01190C
+#define NGBE_MACTXGBOCTL 0x011814
+#define NGBE_MACTXGBOCTH 0x011818
+
+#define NGBE_MACRXOCTL 0x011918
+#define NGBE_MACRXOCTH 0x01191C
+#define NGBE_MACRXMPKTL 0x011920
+#define NGBE_MACRXMPKTH 0x011924
+#define NGBE_MACTXOCTL 0x011824
+#define NGBE_MACTXOCTH 0x011828
+#define NGBE_MACTXMPKTL 0x01182C
+#define NGBE_MACTXMPKTH 0x011830
+
+/* Management Counter */
+#define NGBE_MNGOUT 0x01CF00
+#define NGBE_MNGIN 0x01CF04
+#define NGBE_MNGDROP 0x01CF0C
+
+/* MAC SEC Counter */
+#define NGBE_LSECRXUNTAG 0x017240
+#define NGBE_LSECRXDECOCT 0x017244
+#define NGBE_LSECRXVLDOCT 0x017248
+#define NGBE_LSECRXBADTAG 0x01724C
+#define NGBE_LSECRXNOSCI 0x017250
+#define NGBE_LSECRXUKSCI 0x017254
+#define NGBE_LSECRXUNCHK 0x017258
+#define NGBE_LSECRXDLY 0x01725C
+#define NGBE_LSECRXLATE 0x017260
+#define NGBE_LSECRXGOOD 0x017264
+#define NGBE_LSECRXBAD 0x01726C
+#define NGBE_LSECRXUK 0x017274
+#define NGBE_LSECRXBADSA 0x01727C
+#define NGBE_LSECRXUKSA 0x017280
+#define NGBE_LSECTXUNTAG 0x01D23C
+#define NGBE_LSECTXENC 0x01D240
+#define NGBE_LSECTXPTT 0x01D244
+#define NGBE_LSECTXENCOCT 0x01D248
+#define NGBE_LSECTXPTTOCT 0x01D24C
+
+/* Management Counter */
+#define NGBE_MNGOS2BMC 0x01E094
+#define NGBE_MNGBMC2OS 0x01E090
+
+/******************************************************************************
+ * PF(Physical Function) Registers
+ ******************************************************************************/
+/* Interrupt */
+#define NGBE_ICRMISC 0x000100
+#define NGBE_ICRMISC_MASK MS(8, 0xFFFFFF)
+#define NGBE_ICRMISC_RST MS(10, 0x1) /* device reset event */
+#define NGBE_ICRMISC_TS MS(11, 0x1) /* time sync */
+#define NGBE_ICRMISC_STALL MS(12, 0x1) /* trans or recv path is stalled */
+#define NGBE_ICRMISC_LNKSEC MS(13, 0x1) /* Tx LinkSec require key exchange*/
+#define NGBE_ICRMISC_ERRBUF MS(14, 0x1) /* Packet Buffer Overrun */
+#define NGBE_ICRMISC_ERRMAC MS(17, 0x1) /* err reported by MAC */
+#define NGBE_ICRMISC_PHY MS(18, 0x1) /* interrupt reported by eth phy */
+#define NGBE_ICRMISC_ERRIG MS(20, 0x1) /* integrity error */
+#define NGBE_ICRMISC_SPI MS(21, 0x1) /* SPI interface */
+#define NGBE_ICRMISC_VFMBX MS(23, 0x1) /* VF-PF message box */
+#define NGBE_ICRMISC_GPIO MS(26, 0x1) /* GPIO interrupt */
+#define NGBE_ICRMISC_ERRPCI MS(27, 0x1) /* pcie request error */
+#define NGBE_ICRMISC_HEAT MS(28, 0x1) /* overheat detection */
+#define NGBE_ICRMISC_PROBE MS(29, 0x1) /* probe match */
+#define NGBE_ICRMISC_MNGMBX MS(30, 0x1) /* mng mailbox */
+#define NGBE_ICRMISC_TIMER MS(31, 0x1) /* tcp timer */
+#define NGBE_ICRMISC_DEFAULT ( \
+ NGBE_ICRMISC_RST | \
+ NGBE_ICRMISC_ERRMAC | \
+ NGBE_ICRMISC_PHY | \
+ NGBE_ICRMISC_ERRIG | \
+ NGBE_ICRMISC_GPIO | \
+ NGBE_ICRMISC_VFMBX | \
+ NGBE_ICRMISC_MNGMBX | \
+ NGBE_ICRMISC_STALL | \
+ NGBE_ICRMISC_TIMER)
+#define NGBE_ICSMISC 0x000104
+#define NGBE_IENMISC 0x000108
+#define NGBE_IVARMISC 0x0004FC
+#define NGBE_IVARMISC_VEC(v) LS(v, 0, 0x7)
+#define NGBE_IVARMISC_VLD MS(7, 0x1)
+#define NGBE_ICR(i) (0x000120 + (i) * 4) /*0*/
+#define NGBE_ICR_MASK MS(0, 0x1FF)
+#define NGBE_ICS(i) (0x000130 + (i) * 4) /*0*/
+#define NGBE_ICS_MASK NGBE_ICR_MASK
+#define NGBE_IMS(i) (0x000140 + (i) * 4) /*0*/
+#define NGBE_IMS_MASK NGBE_ICR_MASK
+#define NGBE_IMC(i) (0x000150 + (i) * 4) /*0*/
+#define NGBE_IMC_MASK NGBE_ICR_MASK
+#define NGBE_IVAR(i) (0x000500 + (i) * 4) /*0-3*/
+#define NGBE_IVAR_VEC(v) LS(v, 0, 0x7)
+#define NGBE_IVAR_VLD MS(7, 0x1)
+#define NGBE_TCPTMR 0x000170
+#define NGBE_ITRSEL 0x000180
+
+/* P2V Mailbox */
+#define NGBE_MBMEM(i) (0x005000 + 0x40 * (i)) /*0-7*/
+#define NGBE_MBCTL(i) (0x000600 + 4 * (i)) /*0-7*/
+#define NGBE_MBCTL_STS MS(0, 0x1) /* Initiate message send to VF */
+#define NGBE_MBCTL_ACK MS(1, 0x1) /* Ack message recv'd from VF */
+#define NGBE_MBCTL_VFU MS(2, 0x1) /* VF owns the mailbox buffer */
+#define NGBE_MBCTL_PFU MS(3, 0x1) /* PF owns the mailbox buffer */
+#define NGBE_MBCTL_RVFU MS(4, 0x1) /* Reset VFU - used when VF stuck */
+#define NGBE_MBVFICR 0x000480
+#define NGBE_MBVFICR_INDEX(vf) ((vf) >> 4)
+#define NGBE_MBVFICR_VFREQ_MASK (0x0000FFFF) /* bits for VF messages */
+#define NGBE_MBVFICR_VFREQ_VF1 (0x00000001) /* bit for VF 1 message */
+#define NGBE_MBVFICR_VFACK_MASK (0xFFFF0000) /* bits for VF acks */
+#define NGBE_MBVFICR_VFACK_VF1 (0x00010000) /* bit for VF 1 ack */
+#define NGBE_FLRVFP 0x000490
+#define NGBE_FLRVFE 0x0004A0
+#define NGBE_FLRVFEC 0x0004A8
+
+/******************************************************************************
+ * VF(Virtual Function) Registers
+ ******************************************************************************/
+#define NGBE_VFPBWRAP 0x000000
+#define NGBE_VFPBWRAP_WRAP MS(0, 0x7)
+#define NGBE_VFPBWRAP_EMPT MS(3, 0x1)
+#define NGBE_VFSTATUS 0x000004
+#define NGBE_VFSTATUS_UP MS(0, 0x1)
+#define NGBE_VFSTATUS_BW_MASK MS(1, 0x7)
+#define NGBE_VFSTATUS_BW_1G LS(0x1, 1, 0x7)
+#define NGBE_VFSTATUS_BW_100M LS(0x2, 1, 0x7)
+#define NGBE_VFSTATUS_BW_10M LS(0x4, 1, 0x7)
+#define NGBE_VFSTATUS_BUSY MS(4, 0x1)
+#define NGBE_VFSTATUS_LANID MS(8, 0x3)
+#define NGBE_VFRST 0x000008
+#define NGBE_VFRST_SET MS(0, 0x1)
+#define NGBE_VFMSIXECC 0x00000C
+#define NGBE_VFPLCFG 0x000078
+#define NGBE_VFPLCFG_RSV MS(0, 0x1)
+#define NGBE_VFPLCFG_PSR(v) LS(v, 1, 0x1F)
+#define NGBE_VFPLCFG_PSRL4HDR (0x1)
+#define NGBE_VFPLCFG_PSRL3HDR (0x2)
+#define NGBE_VFPLCFG_PSRL2HDR (0x4)
+#define NGBE_VFPLCFG_PSRTUNHDR (0x8)
+#define NGBE_VFPLCFG_PSRTUNMAC (0x10)
+#define NGBE_VFICR 0x000100
+#define NGBE_VFICR_MASK LS(3, 0, 0x3)
+#define NGBE_VFICR_MBX MS(1, 0x1)
+#define NGBE_VFICR_DONE1 MS(0, 0x1)
+#define NGBE_VFICS 0x000104
+#define NGBE_VFICS_MASK NGBE_VFICR_MASK
+#define NGBE_VFIMS 0x000108
+#define NGBE_VFIMS_MASK NGBE_VFICR_MASK
+#define NGBE_VFIMC 0x00010C
+#define NGBE_VFIMC_MASK NGBE_VFICR_MASK
+#define NGBE_VFGPIE 0x000118
+#define NGBE_VFIVAR(i) (0x000240 + 4 * (i)) /*0-1*/
+#define NGBE_VFIVARMISC 0x000260
+#define NGBE_VFIVAR_ALLOC(v) LS(v, 0, 0x1)
+#define NGBE_VFIVAR_VLD MS(7, 0x1)
+
+#define NGBE_VFMBCTL 0x000600
+#define NGBE_VFMBCTL_REQ MS(0, 0x1) /* Request for PF Ready bit */
+#define NGBE_VFMBCTL_ACK MS(1, 0x1) /* Ack PF message received */
+#define NGBE_VFMBCTL_VFU MS(2, 0x1) /* VF owns the mailbox buffer */
+#define NGBE_VFMBCTL_PFU MS(3, 0x1) /* PF owns the mailbox buffer */
+#define NGBE_VFMBCTL_PFSTS MS(4, 0x1) /* PF wrote a message in the MB */
+#define NGBE_VFMBCTL_PFACK MS(5, 0x1) /* PF ack the previous VF msg */
+#define NGBE_VFMBCTL_RSTI MS(6, 0x1) /* PF has reset indication */
+#define NGBE_VFMBCTL_RSTD MS(7, 0x1) /* PF has indicated reset done */
+#define NGBE_VFMBCTL_R2C_BITS (NGBE_VFMBCTL_RSTD | \
+ NGBE_VFMBCTL_PFSTS | \
+ NGBE_VFMBCTL_PFACK)
+#define NGBE_VFMBX 0x000C00 /*0-15*/
+#define NGBE_VFTPHCTL(i) 0x000D00
+
+/******************************************************************************
+ * PF&VF TxRx Interface
+ ******************************************************************************/
+#define RNGLEN(v) ROUND_OVER(v, 13, 7)
+#define HDRLEN(v) ROUND_OVER(v, 10, 6)
+#define PKTLEN(v) ROUND_OVER(v, 14, 10)
+#define INTTHR(v) ROUND_OVER(v, 4, 0)
+
+#define NGBE_RING_DESC_ALIGN 128
+#define NGBE_RING_DESC_MIN 128
+#define NGBE_RING_DESC_MAX 8192
+#define NGBE_RXD_ALIGN NGBE_RING_DESC_ALIGN
+#define NGBE_TXD_ALIGN NGBE_RING_DESC_ALIGN
+
+/* receive ring */
+#define NGBE_RXBAL(rp) (0x001000 + 0x40 * (rp))
+#define NGBE_RXBAH(rp) (0x001004 + 0x40 * (rp))
+#define NGBE_RXRP(rp) (0x00100C + 0x40 * (rp))
+#define NGBE_RXWP(rp) (0x001008 + 0x40 * (rp))
+#define NGBE_RXCFG(rp) (0x001010 + 0x40 * (rp))
+#define NGBE_RXCFG_ENA MS(0, 0x1)
+#define NGBE_RXCFG_RNGLEN(v) LS(RNGLEN(v), 1, 0x3F)
+#define NGBE_RXCFG_PKTLEN(v) LS(PKTLEN(v), 8, 0xF)
+#define NGBE_RXCFG_PKTLEN_MASK MS(8, 0xF)
+#define NGBE_RXCFG_HDRLEN(v) LS(HDRLEN(v), 12, 0xF)
+#define NGBE_RXCFG_HDRLEN_MASK MS(12, 0xF)
+#define NGBE_RXCFG_WTHRESH(v) LS(v, 16, 0x7)
+#define NGBE_RXCFG_ETAG MS(22, 0x1)
+#define NGBE_RXCFG_SPLIT MS(26, 0x1)
+#define NGBE_RXCFG_CNTAG MS(28, 0x1)
+#define NGBE_RXCFG_DROP MS(30, 0x1)
+#define NGBE_RXCFG_VLAN MS(31, 0x1)
+
+/* transmit ring */
+#define NGBE_TXBAL(rp) (0x003000 + 0x40 * (rp)) /*0-7*/
+#define NGBE_TXBAH(rp) (0x003004 + 0x40 * (rp))
+#define NGBE_TXWP(rp) (0x003008 + 0x40 * (rp))
+#define NGBE_TXRP(rp) (0x00300C + 0x40 * (rp))
+#define NGBE_TXCFG(rp) (0x003010 + 0x40 * (rp))
+#define NGBE_TXCFG_ENA MS(0, 0x1)
+#define NGBE_TXCFG_BUFLEN_MASK MS(1, 0x3F)
+#define NGBE_TXCFG_BUFLEN(v) LS(RNGLEN(v), 1, 0x3F)
+#define NGBE_TXCFG_HTHRESH_MASK MS(8, 0xF)
+#define NGBE_TXCFG_HTHRESH(v) LS(v, 8, 0xF)
+#define NGBE_TXCFG_WTHRESH_MASK MS(16, 0x7F)
+#define NGBE_TXCFG_WTHRESH(v) LS(v, 16, 0x7F)
+#define NGBE_TXCFG_FLUSH MS(26, 0x1)
+
+/* interrupt registers */
+#define NGBE_BMEPEND 0x000168
+#define NGBE_BMEPEND_ST MS(0, 0x1)
+#define NGBE_ITRI 0x000180
+#define NGBE_ITR(i) (0x000200 + 4 * (i))
+#define NGBE_ITR_IVAL_MASK MS(2, 0x1FFF) /* 1ns/10G, 10ns/REST */
+#define NGBE_ITR_IVAL(v) LS(v, 2, 0x1FFF) /*1ns/10G, 10ns/REST*/
+#define NGBE_ITR_IVAL_1G(us) NGBE_ITR_IVAL((us) / 2)
+#define NGBE_ITR_IVAL_10G(us) NGBE_ITR_IVAL((us) / 20)
+#define NGBE_ITR_LLIEA MS(15, 0x1)
+#define NGBE_ITR_LLICREDIT(v) LS(v, 16, 0x1F)
+#define NGBE_ITR_CNT(v) LS(v, 21, 0x3FF)
+#define NGBE_ITR_WRDSA MS(31, 0x1)
+#define NGBE_GPIE 0x000118
+#define NGBE_GPIE_MSIX MS(0, 0x1)
+#define NGBE_GPIE_LLIEA MS(1, 0x1)
+#define NGBE_GPIE_LLIVAL(v) LS(v, 3, 0x1F)
+#define NGBE_GPIE_LLIVAL_H(v) LS(v, 16, 0x7FF)
+
+/******************************************************************************
+ * Debug Registers
+ ******************************************************************************/
+/**
+ * Probe
+ **/
+#define NGBE_PRBCTL 0x010200
+#define NGBE_PRBSTA 0x010204
+#define NGBE_PRBDAT 0x010220
+#define NGBE_PRBCNT 0x010228
+
+#define NGBE_PRBPCI 0x01F010
+#define NGBE_PRBPSR 0x015010
+#define NGBE_PRBRDB 0x019010
+#define NGBE_PRBTDB 0x01C010
+#define NGBE_PRBRSEC 0x017010
+#define NGBE_PRBTSEC 0x01D010
+#define NGBE_PRBMNG 0x01E010
+#define NGBE_PRBRMAC 0x011014
+#define NGBE_PRBTMAC 0x011010
+#define NGBE_PRBREMAC 0x011E04
+#define NGBE_PRBTEMAC 0x011E00
+
+/**
+ * ECC
+ **/
+#define NGBE_ECCRXPBCTL 0x019014
+#define NGBE_ECCRXPBINJ 0x019018
+#define NGBE_ECCRXPB 0x01901C
+#define NGBE_ECCTXPBCTL 0x01C014
+#define NGBE_ECCTXPBINJ 0x01C018
+#define NGBE_ECCTXPB 0x01C01C
+
+#define NGBE_ECCRXETHCTL 0x015014
+#define NGBE_ECCRXETHINJ 0x015018
+#define NGBE_ECCRXETH 0x01401C
+
+#define NGBE_ECCRXSECCTL 0x017014
+#define NGBE_ECCRXSECINJ 0x017018
+#define NGBE_ECCRXSEC 0x01701C
+#define NGBE_ECCTXSECCTL 0x01D014
+#define NGBE_ECCTXSECINJ 0x01D018
+#define NGBE_ECCTXSEC 0x01D01C
+
+#define NGBE_P2VMBX_SIZE (16) /* 16*4B */
+#define NGBE_P2MMBX_SIZE (64) /* 64*4B */
+
+/**************** Global Registers ****************************/
+#define NGBE_POOLETHCTL(pl) (0x015600 + (pl) * 4)
+#define NGBE_POOLETHCTL_LBDIA MS(0, 0x1)
+#define NGBE_POOLETHCTL_LLBDIA MS(1, 0x1)
+#define NGBE_POOLETHCTL_LLB MS(2, 0x1)
+#define NGBE_POOLETHCTL_UCP MS(4, 0x1)
+#define NGBE_POOLETHCTL_ETP MS(5, 0x1)
+#define NGBE_POOLETHCTL_VLA MS(6, 0x1)
+#define NGBE_POOLETHCTL_VLP MS(7, 0x1)
+#define NGBE_POOLETHCTL_UTA MS(8, 0x1)
+#define NGBE_POOLETHCTL_MCHA MS(9, 0x1)
+#define NGBE_POOLETHCTL_UCHA MS(10, 0x1)
+#define NGBE_POOLETHCTL_BCA MS(11, 0x1)
+#define NGBE_POOLETHCTL_MCP MS(12, 0x1)
+#define NGBE_POOLDROPSWBK(i) (0x0151C8 + (i) * 4) /*0-1*/
+
+/**************************** Receive DMA registers **************************/
+
+#define NGBE_RPUP2TC 0x019008
+#define NGBE_RPUP2TC_UP_SHIFT 3
+#define NGBE_RPUP2TC_UP_MASK 0x7
+
+/* mac switcher */
+#define NGBE_ETHADDRL 0x016200
+#define NGBE_ETHADDRL_AD0(v) LS(v, 0, 0xFF)
+#define NGBE_ETHADDRL_AD1(v) LS(v, 8, 0xFF)
+#define NGBE_ETHADDRL_AD2(v) LS(v, 16, 0xFF)
+#define NGBE_ETHADDRL_AD3(v) LS(v, 24, 0xFF)
+#define NGBE_ETHADDRL_ETAG(r) RS(r, 0, 0x3FFF)
+#define NGBE_ETHADDRH 0x016204
+#define NGBE_ETHADDRH_AD4(v) LS(v, 0, 0xFF)
+#define NGBE_ETHADDRH_AD5(v) LS(v, 8, 0xFF)
+#define NGBE_ETHADDRH_AD_MASK MS(0, 0xFFFF)
+#define NGBE_ETHADDRH_ETAG MS(30, 0x1)
+#define NGBE_ETHADDRH_VLD MS(31, 0x1)
+#define NGBE_ETHADDRASS 0x016208
+#define NGBE_ETHADDRIDX 0x016210
+
+/* Outmost Barrier Filters */
+#define NGBE_MCADDRTBL(i) (0x015200 + (i) * 4) /*0-127*/
+#define NGBE_UCADDRTBL(i) (0x015400 + (i) * 4) /*0-127*/
+#define NGBE_VLANTBL(i) (0x016000 + (i) * 4) /*0-127*/
+
+#define NGBE_MNGFLEXSEL 0x1582C
+#define NGBE_MNGFLEXDWL(i) (0x15A00 + ((i) * 16))
+#define NGBE_MNGFLEXDWH(i) (0x15A04 + ((i) * 16))
+#define NGBE_MNGFLEXMSK(i) (0x15A08 + ((i) * 16))
+
+#define NGBE_LANFLEXSEL 0x15B8C
+#define NGBE_LANFLEXDWL(i) (0x15C00 + ((i) * 16))
+#define NGBE_LANFLEXDWH(i) (0x15C04 + ((i) * 16))
+#define NGBE_LANFLEXMSK(i) (0x15C08 + ((i) * 16))
+#define NGBE_LANFLEXCTL 0x15CFC
+
+/* ipsec */
+#define NGBE_IPSRXIDX 0x017100
+#define NGBE_IPSRXIDX_ENA MS(0, 0x1)
+#define NGBE_IPSRXIDX_TB_MASK MS(1, 0x3)
+#define NGBE_IPSRXIDX_TB_IP LS(1, 1, 0x3)
+#define NGBE_IPSRXIDX_TB_SPI LS(2, 1, 0x3)
+#define NGBE_IPSRXIDX_TB_KEY LS(3, 1, 0x3)
+#define NGBE_IPSRXIDX_TBIDX(v) LS(v, 3, 0xF)
+#define NGBE_IPSRXIDX_READ MS(30, 0x1)
+#define NGBE_IPSRXIDX_WRITE MS(31, 0x1)
+#define NGBE_IPSRXADDR(i) (0x017104 + (i) * 4)
+
+#define NGBE_IPSRXSPI 0x017114
+#define NGBE_IPSRXADDRIDX 0x017118
+#define NGBE_IPSRXKEY(i) (0x01711C + (i) * 4)
+#define NGBE_IPSRXSALT 0x01712C
+#define NGBE_IPSRXMODE 0x017130
+#define NGBE_IPSRXMODE_IPV6 0x00000010
+#define NGBE_IPSRXMODE_DEC 0x00000008
+#define NGBE_IPSRXMODE_ESP 0x00000004
+#define NGBE_IPSRXMODE_AH 0x00000002
+#define NGBE_IPSRXMODE_VLD 0x00000001
+#define NGBE_IPSTXIDX 0x01D100
+#define NGBE_IPSTXIDX_ENA MS(0, 0x1)
+#define NGBE_IPSTXIDX_SAIDX(v) LS(v, 3, 0x3FF)
+#define NGBE_IPSTXIDX_READ MS(30, 0x1)
+#define NGBE_IPSTXIDX_WRITE MS(31, 0x1)
+#define NGBE_IPSTXSALT 0x01D104
+#define NGBE_IPSTXKEY(i) (0x01D108 + (i) * 4)
+
+#define NGBE_MACTXCFG 0x011000
+#define NGBE_MACTXCFG_TE MS(0, 0x1)
+#define NGBE_MACTXCFG_SPEED_MASK MS(29, 0x3)
+#define NGBE_MACTXCFG_SPEED(v) LS(v, 29, 0x3)
+#define NGBE_MACTXCFG_SPEED_10G LS(0, 29, 0x3)
+#define NGBE_MACTXCFG_SPEED_1G LS(3, 29, 0x3)
+
+#define NGBE_ISBADDRL 0x000160
+#define NGBE_ISBADDRH 0x000164
+
+#define NGBE_ARBPOOLIDX 0x01820C
+#define NGBE_ARBTXRATE 0x018404
+#define NGBE_ARBTXRATE_MIN(v) LS(v, 0, 0x3FFF)
+#define NGBE_ARBTXRATE_MAX(v) LS(v, 16, 0x3FFF)
+
+/* qos */
+#define NGBE_ARBTXCTL 0x018200
+#define NGBE_ARBTXCTL_RRM MS(1, 0x1)
+#define NGBE_ARBTXCTL_WSP MS(2, 0x1)
+#define NGBE_ARBTXCTL_DIA MS(6, 0x1)
+#define NGBE_ARBTXMMW 0x018208
+
+/* Management */
+#define NGBE_MNGFWSYNC 0x01E000
+#define NGBE_MNGFWSYNC_REQ MS(0, 0x1)
+#define NGBE_MNGSWSYNC 0x01E004
+#define NGBE_MNGSWSYNC_REQ MS(0, 0x1)
+#define NGBE_SWSEM 0x01002C
+#define NGBE_SWSEM_PF MS(0, 0x1)
+#define NGBE_MNGSEM 0x01E008
+#define NGBE_MNGSEM_SW(v) LS(v, 0, 0xFFFF)
+#define NGBE_MNGSEM_SWPHY MS(0, 0x1)
+#define NGBE_MNGSEM_SWMBX MS(2, 0x1)
+#define NGBE_MNGSEM_SWFLASH MS(3, 0x1)
+#define NGBE_MNGSEM_FW(v) LS(v, 16, 0xFFFF)
+#define NGBE_MNGSEM_FWPHY MS(16, 0x1)
+#define NGBE_MNGSEM_FWMBX MS(18, 0x1)
+#define NGBE_MNGSEM_FWFLASH MS(19, 0x1)
+#define NGBE_MNGMBXCTL 0x01E044
+#define NGBE_MNGMBXCTL_SWRDY MS(0, 0x1)
+#define NGBE_MNGMBXCTL_SWACK MS(1, 0x1)
+#define NGBE_MNGMBXCTL_FWRDY MS(2, 0x1)
+#define NGBE_MNGMBXCTL_FWACK MS(3, 0x1)
+#define NGBE_MNGMBX 0x01E100
+
+/**
+ * MDIO(PHY)
+ **/
+#define NGBE_MDIOSCA 0x011200
+#define NGBE_MDIOSCA_REG(v) LS(v, 0, 0xFFFF)
+#define NGBE_MDIOSCA_PORT(v) LS(v, 16, 0x1F)
+#define NGBE_MDIOSCA_DEV(v) LS(v, 21, 0x1F)
+#define NGBE_MDIOSCD 0x011204
+#define NGBE_MDIOSCD_DAT_R(r) RS(r, 0, 0xFFFF)
+#define NGBE_MDIOSCD_DAT(v) LS(v, 0, 0xFFFF)
+#define NGBE_MDIOSCD_CMD_PREAD LS(2, 16, 0x3)
+#define NGBE_MDIOSCD_CMD_WRITE LS(1, 16, 0x3)
+#define NGBE_MDIOSCD_CMD_READ LS(3, 16, 0x3)
+#define NGBE_MDIOSCD_SADDR MS(18, 0x1)
+#define NGBE_MDIOSCD_CLOCK(v) LS(v, 19, 0x7)
+#define NGBE_MDIOSCD_BUSY MS(22, 0x1)
+
+#define NGBE_MDIOMODE 0x011220
+#define NGBE_MDIOMODE_MASK MS(0, 0xF)
+#define NGBE_MDIOMODE_PRT3CL22 MS(3, 0x1)
+#define NGBE_MDIOMODE_PRT2CL22 MS(2, 0x1)
+#define NGBE_MDIOMODE_PRT1CL22 MS(1, 0x1)
+#define NGBE_MDIOMODE_PRT0CL22 MS(0, 0x1)
+
+#define NVM_OROM_OFFSET 0x17
+#define NVM_OROM_BLK_LOW 0x83
+#define NVM_OROM_BLK_HI 0x84
+#define NVM_OROM_PATCH_MASK 0xFF
+#define NVM_OROM_SHIFT 8
+#define NVM_VER_MASK 0x00FF /* version mask */
+#define NVM_VER_SHIFT 8 /* version bit shift */
+#define NVM_OEM_PROD_VER_PTR 0x1B /* OEM Product version block pointer */
+#define NVM_OEM_PROD_VER_CAP_OFF 0x1 /* OEM Product version format offset */
+#define NVM_OEM_PROD_VER_OFF_L 0x2 /* OEM Product version offset low */
+#define NVM_OEM_PROD_VER_OFF_H 0x3 /* OEM Product version offset high */
+#define NVM_OEM_PROD_VER_CAP_MASK 0xF /* OEM Product version cap mask */
+#define NVM_OEM_PROD_VER_MOD_LEN 0x3 /* OEM Product version module length */
+#define NVM_ETK_OFF_LOW 0x2D /* version low order word */
+#define NVM_ETK_OFF_HI 0x2E /* version high order word */
+#define NVM_ETK_SHIFT 16 /* high version word shift */
+#define NVM_VER_INVALID 0xFFFF
+#define NVM_ETK_VALID 0x8000
+#define NVM_INVALID_PTR 0xFFFF
+#define NVM_VER_SIZE 32 /* version string size */
+
+#define NGBE_REG_RSSTBL NGBE_RSSTBL(0)
+#define NGBE_REG_RSSKEY NGBE_RSSKEY(0)
+
+/*
+ * read non-rc counters
+ */
+#define NGBE_UPDCNT32(reg, last, cur) \
+do { \
+ uint32_t latest = rd32(hw, reg); \
+ if (hw->offset_loaded || hw->rx_loaded) \
+ last = 0; \
+ cur += (latest - last) & UINT_MAX; \
+ last = latest; \
+} while (0)
+
+#define NGBE_UPDCNT36(regl, last, cur) \
+do { \
+ uint64_t new_lsb = rd32(hw, regl); \
+ uint64_t new_msb = rd32(hw, regl + 4); \
+ uint64_t latest = ((new_msb << 32) | new_lsb); \
+ if (hw->offset_loaded || hw->rx_loaded) \
+ last = 0; \
+ cur += (0x1000000000LL + latest - last) & 0xFFFFFFFFFLL; \
+ last = latest; \
+} while (0)
+
+/**
+ * register operations
+ **/
+#define NGBE_REG_READ32(addr) rte_read32(addr)
+#define NGBE_REG_READ32_RELAXED(addr) rte_read32_relaxed(addr)
+#define NGBE_REG_WRITE32(addr, val) rte_write32(val, addr)
+#define NGBE_REG_WRITE32_RELAXED(addr, val) rte_write32_relaxed(val, addr)
+
+#define NGBE_DEAD_READ_REG 0xdeadbeefU
+#define NGBE_FAILED_READ_REG 0xffffffffU
+#define NGBE_REG_ADDR(hw, reg) \
+ ((volatile u32 *)((char *)(hw)->hw_addr + (reg)))
+
+static inline u32
+ngbe_get32(volatile u32 *addr)
+{
+ u32 val = NGBE_REG_READ32(addr);
+ return rte_le_to_cpu_32(val);
+}
+
+static inline void
+ngbe_set32(volatile u32 *addr, u32 val)
+{
+ val = rte_cpu_to_le_32(val);
+ NGBE_REG_WRITE32(addr, val);
+}
+
+static inline u32
+ngbe_get32_masked(volatile u32 *addr, u32 mask)
+{
+ u32 val = ngbe_get32(addr);
+ val &= mask;
+ return val;
+}
+
+static inline void
+ngbe_set32_masked(volatile u32 *addr, u32 mask, u32 field)
+{
+ u32 val = ngbe_get32(addr);
+ val = ((val & ~mask) | (field & mask));
+ ngbe_set32(addr, val);
+}
+
+static inline u32
+ngbe_get32_relaxed(volatile u32 *addr)
+{
+ u32 val = NGBE_REG_READ32_RELAXED(addr);
+ return rte_le_to_cpu_32(val);
+}
+
+static inline void
+ngbe_set32_relaxed(volatile u32 *addr, u32 val)
+{
+ val = rte_cpu_to_le_32(val);
+ NGBE_REG_WRITE32_RELAXED(addr, val);
+}
+
+static inline u32
+rd32(struct ngbe_hw *hw, u32 reg)
+{
+ if (reg == NGBE_REG_DUMMY)
+ return 0;
+ return ngbe_get32(NGBE_REG_ADDR(hw, reg));
+}
+
+static inline void
+wr32(struct ngbe_hw *hw, u32 reg, u32 val)
+{
+ if (reg == NGBE_REG_DUMMY)
+ return;
+ ngbe_set32(NGBE_REG_ADDR(hw, reg), val);
+}
+
+static inline u32
+rd32m(struct ngbe_hw *hw, u32 reg, u32 mask)
+{
+ u32 val = rd32(hw, reg);
+ val &= mask;
+ return val;
+}
+
+static inline void
+wr32m(struct ngbe_hw *hw, u32 reg, u32 mask, u32 field)
+{
+ u32 val = rd32(hw, reg);
+ val = ((val & ~mask) | (field & mask));
+ wr32(hw, reg, val);
+}
+
+static inline u64
+rd64(struct ngbe_hw *hw, u32 reg)
+{
+ u64 lsb = rd32(hw, reg);
+ u64 msb = rd32(hw, reg + 4);
+ return (lsb | msb << 32);
+}
+
+static inline void
+wr64(struct ngbe_hw *hw, u32 reg, u64 val)
+{
+ wr32(hw, reg, (u32)val);
+ wr32(hw, reg + 4, (u32)(val >> 32));
+}
+
+/* poll register */
+static inline u32
+po32m(struct ngbe_hw *hw, u32 reg, u32 mask, u32 expect, u32 *actual,
+ u32 loop, u32 slice)
+{
+ bool usec = true;
+ u32 value = 0, all = 0;
+
+ if (slice > 1000 * MAX_UDELAY_MS) {
+ usec = false;
+ slice = (slice + 500) / 1000;
+ }
+
+ do {
+ all |= rd32(hw, reg);
+ value |= mask & all;
+ if (value == expect)
+ break;
+
+ usec ? usec_delay(slice) : msec_delay(slice);
+ } while (--loop > 0);
+
+ if (actual)
+ *actual = all;
+
+ return loop;
+}
+
+/* flush all write operations */
+#define ngbe_flush(hw) rd32(hw, 0x00100C)
+
+#define rd32a(hw, reg, idx) ( \
+ rd32((hw), (reg) + ((idx) << 2)))
+#define wr32a(hw, reg, idx, val) \
+ wr32((hw), (reg) + ((idx) << 2), (val))
+
+#define rd32w(hw, reg, mask, slice) do { \
+ rd32((hw), reg); \
+ po32m((hw), reg, mask, mask, NULL, 5, slice); \
+} while (0)
+
+#define wr32w(hw, reg, val, mask, slice) do { \
+ wr32((hw), reg, val); \
+ po32m((hw), reg, mask, mask, NULL, 5, slice); \
+} while (0)
+
+#define NGBE_XPCS_IDAADDR 0x13000
+#define NGBE_XPCS_IDADATA 0x13004
+#define NGBE_EPHY_IDAADDR 0x13008
+#define NGBE_EPHY_IDADATA 0x1300C
+static inline u32
+rd32_epcs(struct ngbe_hw *hw, u32 addr)
+{
+ u32 data;
+ wr32(hw, NGBE_XPCS_IDAADDR, addr);
+ data = rd32(hw, NGBE_XPCS_IDADATA);
+ return data;
+}
+
+static inline void
+wr32_epcs(struct ngbe_hw *hw, u32 addr, u32 data)
+{
+ wr32(hw, NGBE_XPCS_IDAADDR, addr);
+ wr32(hw, NGBE_XPCS_IDADATA, data);
+}
+
+static inline u32
+rd32_ephy(struct ngbe_hw *hw, u32 addr)
+{
+ u32 data;
+ wr32(hw, NGBE_EPHY_IDAADDR, addr);
+ data = rd32(hw, NGBE_EPHY_IDADATA);
+ return data;
+}
+
+static inline void
+wr32_ephy(struct ngbe_hw *hw, u32 addr, u32 data)
+{
+ wr32(hw, NGBE_EPHY_IDAADDR, addr);
+ wr32(hw, NGBE_EPHY_IDADATA, data);
+}
+
+#endif /* _NGBE_REGS_H_ */
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 05/19] net/ngbe: set MAC type and LAN ID with device initialization
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (3 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 04/19] net/ngbe: define registers Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 06/19] net/ngbe: init and validate EEPROM Jiawen Wu
` (14 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Add basic init and uninit function.
Map device IDs and subsystem IDs to single ID for easy operation.
Then initialize the shared code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/meson.build | 4 +-
drivers/net/ngbe/base/ngbe.h | 11 ++
drivers/net/ngbe/base/ngbe_dummy.h | 37 ++++++
drivers/net/ngbe/base/ngbe_hw.c | 182 ++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 18 +++
drivers/net/ngbe/base/ngbe_osdep.h | 183 +++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_type.h | 78 ++++++++++++
drivers/net/ngbe/ngbe_ethdev.c | 41 ++++++-
drivers/net/ngbe/ngbe_ethdev.h | 33 ++++++
9 files changed, 582 insertions(+), 5 deletions(-)
create mode 100644 drivers/net/ngbe/base/ngbe.h
create mode 100644 drivers/net/ngbe/base/ngbe_dummy.h
create mode 100644 drivers/net/ngbe/base/ngbe_hw.c
create mode 100644 drivers/net/ngbe/base/ngbe_hw.h
create mode 100644 drivers/net/ngbe/base/ngbe_osdep.h
create mode 100644 drivers/net/ngbe/base/ngbe_type.h
create mode 100644 drivers/net/ngbe/ngbe_ethdev.h
diff --git a/drivers/net/ngbe/base/meson.build b/drivers/net/ngbe/base/meson.build
index e7616ba210..1fe702fa5b 100644
--- a/drivers/net/ngbe/base/meson.build
+++ b/drivers/net/ngbe/base/meson.build
@@ -1,7 +1,9 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
-sources = []
+sources = [
+ 'ngbe_hw.c',
+]
error_cflags = []
diff --git a/drivers/net/ngbe/base/ngbe.h b/drivers/net/ngbe/base/ngbe.h
new file mode 100644
index 0000000000..fe85b07b57
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#ifndef _NGBE_H_
+#define _NGBE_H_
+
+#include "ngbe_type.h"
+#include "ngbe_hw.h"
+
+#endif /* _NGBE_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
new file mode 100644
index 0000000000..ce6156b697
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#ifndef _NGBE_TYPE_DUMMY_H_
+#define _NGBE_TYPE_DUMMY_H_
+
+#ifdef TUP
+#elif defined(__GNUC__)
+#define TUP(x) x##_unused ngbe_unused
+#elif defined(__LCLINT__)
+#define TUP(x) x /*@unused@*/
+#else
+#define TUP(x) x
+#endif /*TUP*/
+#define TUP0 TUP(p0)
+#define TUP1 TUP(p1)
+#define TUP2 TUP(p2)
+#define TUP3 TUP(p3)
+#define TUP4 TUP(p4)
+#define TUP5 TUP(p5)
+#define TUP6 TUP(p6)
+#define TUP7 TUP(p7)
+#define TUP8 TUP(p8)
+#define TUP9 TUP(p9)
+
+/* struct ngbe_bus_operations */
+static inline void ngbe_bus_set_lan_id_dummy(struct ngbe_hw *TUP0)
+{
+}
+static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
+{
+ hw->bus.set_lan_id = ngbe_bus_set_lan_id_dummy;
+}
+
+#endif /* _NGBE_TYPE_DUMMY_H_ */
+
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
new file mode 100644
index 0000000000..c40215e43e
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -0,0 +1,182 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include "ngbe_type.h"
+#include "ngbe_hw.h"
+
+/**
+ * ngbe_set_lan_id_multi_port - Set LAN id for PCIe multiple port devices
+ * @hw: pointer to the HW structure
+ *
+ * Determines the LAN function id by reading memory-mapped registers and swaps
+ * the port value if requested, and set MAC instance for devices.
+ **/
+void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw)
+{
+ struct ngbe_bus_info *bus = &hw->bus;
+ u32 reg = 0;
+
+ DEBUGFUNC("ngbe_set_lan_id_multi_port");
+
+ reg = rd32(hw, NGBE_PORTSTAT);
+ bus->lan_id = NGBE_PORTSTAT_ID(reg);
+ bus->func = bus->lan_id;
+}
+
+/**
+ * ngbe_set_mac_type - Sets MAC type
+ * @hw: pointer to the HW structure
+ *
+ * This function sets the mac type of the adapter based on the
+ * vendor ID and device ID stored in the hw structure.
+ **/
+s32 ngbe_set_mac_type(struct ngbe_hw *hw)
+{
+ s32 err = 0;
+
+ DEBUGFUNC("ngbe_set_mac_type");
+
+ if (hw->vendor_id != PCI_VENDOR_ID_WANGXUN) {
+ DEBUGOUT("Unsupported vendor id: %x", hw->vendor_id);
+ return NGBE_ERR_DEVICE_NOT_SUPPORTED;
+ }
+
+ switch (hw->sub_device_id) {
+ case NGBE_SUB_DEV_ID_EM_RTL_SGMII:
+ case NGBE_SUB_DEV_ID_EM_MVL_RGMII:
+ hw->phy.media_type = ngbe_media_type_copper;
+ hw->mac.type = ngbe_mac_em;
+ break;
+ case NGBE_SUB_DEV_ID_EM_MVL_SFP:
+ case NGBE_SUB_DEV_ID_EM_YT8521S_SFP:
+ hw->phy.media_type = ngbe_media_type_fiber;
+ hw->mac.type = ngbe_mac_em;
+ break;
+ case NGBE_SUB_DEV_ID_EM_VF:
+ hw->phy.media_type = ngbe_media_type_virtual;
+ hw->mac.type = ngbe_mac_em_vf;
+ break;
+ default:
+ err = NGBE_ERR_DEVICE_NOT_SUPPORTED;
+ hw->phy.media_type = ngbe_media_type_unknown;
+ hw->mac.type = ngbe_mac_unknown;
+ DEBUGOUT("Unsupported device id: %x", hw->device_id);
+ break;
+ }
+
+ DEBUGOUT("found mac: %d media: %d, returns: %d\n",
+ hw->mac.type, hw->phy.media_type, err);
+ return err;
+}
+
+void ngbe_map_device_id(struct ngbe_hw *hw)
+{
+ u16 oem = hw->sub_system_id & NGBE_OEM_MASK;
+ u16 internal = hw->sub_system_id & NGBE_INTERNAL_MASK;
+ hw->is_pf = true;
+
+ /* move subsystem_device_id to device_id */
+ switch (hw->device_id) {
+ case NGBE_DEV_ID_EM_WX1860AL_W_VF:
+ case NGBE_DEV_ID_EM_WX1860A2_VF:
+ case NGBE_DEV_ID_EM_WX1860A2S_VF:
+ case NGBE_DEV_ID_EM_WX1860A4_VF:
+ case NGBE_DEV_ID_EM_WX1860A4S_VF:
+ case NGBE_DEV_ID_EM_WX1860AL2_VF:
+ case NGBE_DEV_ID_EM_WX1860AL2S_VF:
+ case NGBE_DEV_ID_EM_WX1860AL4_VF:
+ case NGBE_DEV_ID_EM_WX1860AL4S_VF:
+ case NGBE_DEV_ID_EM_WX1860NCSI_VF:
+ case NGBE_DEV_ID_EM_WX1860A1_VF:
+ case NGBE_DEV_ID_EM_WX1860A1L_VF:
+ hw->device_id = NGBE_DEV_ID_EM_VF;
+ hw->sub_device_id = NGBE_SUB_DEV_ID_EM_VF;
+ hw->is_pf = false;
+ break;
+ case NGBE_DEV_ID_EM_WX1860AL_W:
+ case NGBE_DEV_ID_EM_WX1860A2:
+ case NGBE_DEV_ID_EM_WX1860A2S:
+ case NGBE_DEV_ID_EM_WX1860A4:
+ case NGBE_DEV_ID_EM_WX1860A4S:
+ case NGBE_DEV_ID_EM_WX1860AL2:
+ case NGBE_DEV_ID_EM_WX1860AL2S:
+ case NGBE_DEV_ID_EM_WX1860AL4:
+ case NGBE_DEV_ID_EM_WX1860AL4S:
+ case NGBE_DEV_ID_EM_WX1860NCSI:
+ case NGBE_DEV_ID_EM_WX1860A1:
+ case NGBE_DEV_ID_EM_WX1860A1L:
+ hw->device_id = NGBE_DEV_ID_EM;
+ if (oem == NGBE_LY_M88E1512_SFP ||
+ internal == NGBE_INTERNAL_SFP)
+ hw->sub_device_id = NGBE_SUB_DEV_ID_EM_MVL_SFP;
+ else if (hw->sub_system_id == NGBE_SUB_DEV_ID_EM_M88E1512_RJ45)
+ hw->sub_device_id = NGBE_SUB_DEV_ID_EM_MVL_RGMII;
+ else if (oem == NGBE_YT8521S_SFP ||
+ oem == NGBE_LY_YT8521S_SFP)
+ hw->sub_device_id = NGBE_SUB_DEV_ID_EM_YT8521S_SFP;
+ else
+ hw->sub_device_id = NGBE_SUB_DEV_ID_EM_RTL_SGMII;
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * ngbe_init_ops_pf - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type.
+ * Does not touch the hardware.
+ **/
+s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
+{
+ struct ngbe_bus_info *bus = &hw->bus;
+
+ DEBUGFUNC("ngbe_init_ops_pf");
+
+ /* BUS */
+ bus->set_lan_id = ngbe_set_lan_id_multi_port;
+
+ return 0;
+}
+
+/**
+ * ngbe_init_shared_code - Initialize the shared code
+ * @hw: pointer to hardware structure
+ *
+ * This will assign function pointers and assign the MAC type and PHY code.
+ * Does not touch the hardware. This function must be called prior to any
+ * other function in the shared code. The ngbe_hw structure should be
+ * memset to 0 prior to calling this function. The following fields in
+ * hw structure should be filled in prior to calling this function:
+ * hw_addr, back, device_id, vendor_id, subsystem_device_id
+ **/
+s32 ngbe_init_shared_code(struct ngbe_hw *hw)
+{
+ s32 status = 0;
+
+ DEBUGFUNC("ngbe_init_shared_code");
+
+ /*
+ * Set the mac type
+ */
+ ngbe_set_mac_type(hw);
+
+ ngbe_init_ops_dummy(hw);
+ switch (hw->mac.type) {
+ case ngbe_mac_em:
+ ngbe_init_ops_pf(hw);
+ break;
+ default:
+ status = NGBE_ERR_DEVICE_NOT_SUPPORTED;
+ break;
+ }
+
+ hw->bus.set_lan_id(hw);
+
+ return status;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
new file mode 100644
index 0000000000..a33776552b
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_HW_H_
+#define _NGBE_HW_H_
+
+#include "ngbe_type.h"
+
+void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
+
+s32 ngbe_init_shared_code(struct ngbe_hw *hw);
+s32 ngbe_set_mac_type(struct ngbe_hw *hw);
+s32 ngbe_init_ops_pf(struct ngbe_hw *hw);
+void ngbe_map_device_id(struct ngbe_hw *hw);
+
+#endif /* _NGBE_HW_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_osdep.h b/drivers/net/ngbe/base/ngbe_osdep.h
new file mode 100644
index 0000000000..b62d793191
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_osdep.h
@@ -0,0 +1,183 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_OS_H_
+#define _NGBE_OS_H_
+
+#include <string.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <rte_version.h>
+#include <rte_common.h>
+#include <rte_debug.h>
+#include <rte_cycles.h>
+#include <rte_log.h>
+#include <rte_byteorder.h>
+#include <rte_config.h>
+#include <rte_io.h>
+#include <rte_ether.h>
+
+#include "../ngbe_logs.h"
+
+#define RTE_LIBRTE_NGBE_TM DCPV(1, 0)
+#define TMZ_PADDR(mz) ((mz)->iova)
+#define TMZ_VADDR(mz) ((mz)->addr)
+#define TDEV_NAME(eth_dev) ((eth_dev)->device->name)
+
+#define ASSERT(x) do { \
+ if (!(x)) \
+ PMD_DRV_LOG(ERR, "NGBE: %d", x); \
+} while (0)
+
+#define ngbe_unused __rte_unused
+
+#define usec_delay(x) rte_delay_us(x)
+#define msec_delay(x) rte_delay_ms(x)
+#define usleep(x) rte_delay_us(x)
+#define msleep(x) rte_delay_ms(x)
+
+#define FALSE 0
+#define TRUE 1
+
+#ifndef false
+#define false 0
+#endif
+#ifndef true
+#define true 1
+#endif
+#define min(a, b) RTE_MIN(a, b)
+#define max(a, b) RTE_MAX(a, b)
+
+/* Bunch of defines for shared code bogosity */
+
+static inline void UNREFERENCED(const char *a __rte_unused, ...) {}
+#define UNREFERENCED_PARAMETER(args...) UNREFERENCED("", ##args)
+
+#define STATIC static
+
+typedef uint8_t u8;
+typedef int8_t s8;
+typedef uint16_t u16;
+typedef int16_t s16;
+typedef uint32_t u32;
+typedef int32_t s32;
+typedef uint64_t u64;
+typedef int64_t s64;
+
+/* Little Endian defines */
+#ifndef __le16
+#define __le16 u16
+#define __le32 u32
+#define __le64 u64
+#endif
+#ifndef __be16
+#define __be16 u16
+#define __be32 u32
+#define __be64 u64
+#endif
+
+/* Bit shift and mask */
+#define BIT_MASK4 (0x0000000FU)
+#define BIT_MASK8 (0x000000FFU)
+#define BIT_MASK16 (0x0000FFFFU)
+#define BIT_MASK32 (0xFFFFFFFFU)
+#define BIT_MASK64 (0xFFFFFFFFFFFFFFFFUL)
+
+#ifndef cpu_to_le32
+#define cpu_to_le16(v) rte_cpu_to_le_16((u16)(v))
+#define cpu_to_le32(v) rte_cpu_to_le_32((u32)(v))
+#define cpu_to_le64(v) rte_cpu_to_le_64((u64)(v))
+#define le_to_cpu16(v) rte_le_to_cpu_16((u16)(v))
+#define le_to_cpu32(v) rte_le_to_cpu_32((u32)(v))
+#define le_to_cpu64(v) rte_le_to_cpu_64((u64)(v))
+
+#define cpu_to_be16(v) rte_cpu_to_be_16((u16)(v))
+#define cpu_to_be32(v) rte_cpu_to_be_32((u32)(v))
+#define cpu_to_be64(v) rte_cpu_to_be_64((u64)(v))
+#define be_to_cpu16(v) rte_be_to_cpu_16((u16)(v))
+#define be_to_cpu32(v) rte_be_to_cpu_32((u32)(v))
+#define be_to_cpu64(v) rte_be_to_cpu_64((u64)(v))
+
+#define le_to_be16(v) rte_bswap16((u16)(v))
+#define le_to_be32(v) rte_bswap32((u32)(v))
+#define le_to_be64(v) rte_bswap64((u64)(v))
+#define be_to_le16(v) rte_bswap16((u16)(v))
+#define be_to_le32(v) rte_bswap32((u32)(v))
+#define be_to_le64(v) rte_bswap64((u64)(v))
+
+#define npu_to_le16(v) (v)
+#define npu_to_le32(v) (v)
+#define npu_to_le64(v) (v)
+#define le_to_npu16(v) (v)
+#define le_to_npu32(v) (v)
+#define le_to_npu64(v) (v)
+
+#define npu_to_be16(v) le_to_be16((u16)(v))
+#define npu_to_be32(v) le_to_be32((u32)(v))
+#define npu_to_be64(v) le_to_be64((u64)(v))
+#define be_to_npu16(v) be_to_le16((u16)(v))
+#define be_to_npu32(v) be_to_le32((u32)(v))
+#define be_to_npu64(v) be_to_le64((u64)(v))
+#endif /* !cpu_to_le32 */
+
+static inline u16 REVERT_BIT_MASK16(u16 mask)
+{
+ mask = ((mask & 0x5555) << 1) | ((mask & 0xAAAA) >> 1);
+ mask = ((mask & 0x3333) << 2) | ((mask & 0xCCCC) >> 2);
+ mask = ((mask & 0x0F0F) << 4) | ((mask & 0xF0F0) >> 4);
+ return ((mask & 0x00FF) << 8) | ((mask & 0xFF00) >> 8);
+}
+
+static inline u32 REVERT_BIT_MASK32(u32 mask)
+{
+ mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+ mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+ mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+ mask = ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+ return ((mask & 0x0000FFFF) << 16) | ((mask & 0xFFFF0000) >> 16);
+}
+
+static inline u64 REVERT_BIT_MASK64(u64 mask)
+{
+ mask = ((mask & 0x5555555555555555) << 1) |
+ ((mask & 0xAAAAAAAAAAAAAAAA) >> 1);
+ mask = ((mask & 0x3333333333333333) << 2) |
+ ((mask & 0xCCCCCCCCCCCCCCCC) >> 2);
+ mask = ((mask & 0x0F0F0F0F0F0F0F0F) << 4) |
+ ((mask & 0xF0F0F0F0F0F0F0F0) >> 4);
+ mask = ((mask & 0x00FF00FF00FF00FF) << 8) |
+ ((mask & 0xFF00FF00FF00FF00) >> 8);
+ mask = ((mask & 0x0000FFFF0000FFFF) << 16) |
+ ((mask & 0xFFFF0000FFFF0000) >> 16);
+ return ((mask & 0x00000000FFFFFFFF) << 32) |
+ ((mask & 0xFFFFFFFF00000000) >> 32);
+}
+
+#define IOMEM
+
+#define prefetch(x) rte_prefetch0(x)
+
+#define ARRAY_SIZE(x) ((int32_t)RTE_DIM(x))
+
+#ifndef MAX_UDELAY_MS
+#define MAX_UDELAY_MS 5
+#endif
+
+#define ETH_ADDR_LEN 6
+#define ETH_FCS_LEN 4
+
+/* Check whether address is multicast. This is little-endian specific check.*/
+#define NGBE_IS_MULTICAST(address) \
+ rte_is_multicast_ether_addr(address)
+
+/* Check whether an address is broadcast. */
+#define NGBE_IS_BROADCAST(address) \
+ rte_is_broadcast_ether_addr(address)
+
+#define ETH_P_8021Q 0x8100
+#define ETH_P_8021AD 0x88A8
+
+#endif /* _NGBE_OS_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
new file mode 100644
index 0000000000..1d11045a6c
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_TYPE_H_
+#define _NGBE_TYPE_H_
+
+#include "ngbe_status.h"
+#include "ngbe_osdep.h"
+#include "ngbe_devids.h"
+
+enum ngbe_mac_type {
+ ngbe_mac_unknown = 0,
+ ngbe_mac_em,
+ ngbe_mac_em_vf,
+ ngbe_num_macs
+};
+
+enum ngbe_phy_type {
+ ngbe_phy_unknown = 0,
+ ngbe_phy_none,
+ ngbe_phy_rtl,
+ ngbe_phy_mvl,
+ ngbe_phy_mvl_sfi,
+ ngbe_phy_yt8521s,
+ ngbe_phy_yt8521s_sfi,
+ ngbe_phy_zte,
+ ngbe_phy_cu_mtd,
+};
+
+enum ngbe_media_type {
+ ngbe_media_type_unknown = 0,
+ ngbe_media_type_fiber,
+ ngbe_media_type_fiber_qsfp,
+ ngbe_media_type_copper,
+ ngbe_media_type_backplane,
+ ngbe_media_type_cx4,
+ ngbe_media_type_virtual
+};
+
+struct ngbe_hw;
+
+/* Bus parameters */
+struct ngbe_bus_info {
+ void (*set_lan_id)(struct ngbe_hw *hw);
+
+ u16 func;
+ u8 lan_id;
+};
+
+struct ngbe_mac_info {
+ enum ngbe_mac_type type;
+};
+
+struct ngbe_phy_info {
+ enum ngbe_media_type media_type;
+ enum ngbe_phy_type type;
+};
+
+struct ngbe_hw {
+ void IOMEM *hw_addr;
+ void *back;
+ struct ngbe_mac_info mac;
+ struct ngbe_phy_info phy;
+ struct ngbe_bus_info bus;
+ u16 device_id;
+ u16 vendor_id;
+ u16 sub_device_id;
+ u16 sub_system_id;
+
+ bool is_pf;
+};
+
+#include "ngbe_regs.h"
+#include "ngbe_dummy.h"
+
+#endif /* _NGBE_TYPE_H_ */
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index c42b9ada55..f94c5d9306 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -8,7 +8,10 @@
#include <ethdev_pci.h>
#include "ngbe_logs.h"
-#include "ngbe_devids.h"
+#include "ngbe.h"
+#include "ngbe_ethdev.h"
+
+static int ngbe_dev_close(struct rte_eth_dev *dev);
/*
* The set of PCI devices this driver supports
@@ -33,6 +36,8 @@ static int
eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
{
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+ struct ngbe_hw *hw = ngbe_dev_hw(eth_dev);
+ int err;
PMD_INIT_FUNC_TRACE();
@@ -41,7 +46,21 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
rte_eth_copy_pci_info(eth_dev, pci_dev);
- return -EINVAL;
+ /* Vendor and Device ID need to be set before init of shared code */
+ hw->device_id = pci_dev->id.device_id;
+ hw->vendor_id = pci_dev->id.vendor_id;
+ hw->sub_system_id = pci_dev->id.subsystem_device_id;
+ ngbe_map_device_id(hw);
+ hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
+
+ /* Initialize the shared code (base driver) */
+ err = ngbe_init_shared_code(hw);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR, "Shared code init failed: %d", err);
+ return -EIO;
+ }
+
+ return 0;
}
static int
@@ -52,7 +71,7 @@ eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
- RTE_SET_USED(eth_dev);
+ ngbe_dev_close(eth_dev);
return -EINVAL;
}
@@ -62,7 +81,8 @@ eth_ngbe_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
return rte_eth_dev_create(&pci_dev->device, pci_dev->device.name,
- 0, eth_dev_pci_specific_init, pci_dev,
+ sizeof(struct ngbe_adapter),
+ eth_dev_pci_specific_init, pci_dev,
eth_ngbe_dev_init, NULL);
}
@@ -84,6 +104,19 @@ static struct rte_pci_driver rte_ngbe_pmd = {
.remove = eth_ngbe_pci_remove,
};
+/*
+ * Reset and stop device.
+ */
+static int
+ngbe_dev_close(struct rte_eth_dev *dev)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ RTE_SET_USED(dev);
+
+ return -EINVAL;
+}
+
RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
new file mode 100644
index 0000000000..20ab896f97
--- /dev/null
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_ETHDEV_H_
+#define _NGBE_ETHDEV_H_
+
+/*
+ * Structure to store private data for each driver instance (for each port).
+ */
+struct ngbe_adapter {
+ struct ngbe_hw hw;
+};
+
+static inline struct ngbe_adapter *
+ngbe_dev_adapter(struct rte_eth_dev *dev)
+{
+ struct ngbe_adapter *ad = dev->data->dev_private;
+
+ return ad;
+}
+
+static inline struct ngbe_hw *
+ngbe_dev_hw(struct rte_eth_dev *dev)
+{
+ struct ngbe_adapter *ad = ngbe_dev_adapter(dev);
+ struct ngbe_hw *hw = &ad->hw;
+
+ return hw;
+}
+
+#endif /* _NGBE_ETHDEV_H_ */
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 06/19] net/ngbe: init and validate EEPROM
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (4 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 05/19] net/ngbe: set MAC type and LAN ID with device initialization Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 07/19] net/ngbe: add HW initialization Jiawen Wu
` (13 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Reset swfw lock before NVM access, init EEPROM and validate the
checksum.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/meson.build | 2 +
drivers/net/ngbe/base/ngbe_dummy.h | 23 ++++
drivers/net/ngbe/base/ngbe_eeprom.c | 203 ++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_eeprom.h | 17 +++
drivers/net/ngbe/base/ngbe_hw.c | 83 ++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 3 +
drivers/net/ngbe/base/ngbe_mng.c | 198 +++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_mng.h | 65 +++++++++
drivers/net/ngbe/base/ngbe_type.h | 24 ++++
drivers/net/ngbe/ngbe_ethdev.c | 39 ++++++
10 files changed, 657 insertions(+)
create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.c
create mode 100644 drivers/net/ngbe/base/ngbe_eeprom.h
create mode 100644 drivers/net/ngbe/base/ngbe_mng.c
create mode 100644 drivers/net/ngbe/base/ngbe_mng.h
diff --git a/drivers/net/ngbe/base/meson.build b/drivers/net/ngbe/base/meson.build
index 1fe702fa5b..d206cc6d74 100644
--- a/drivers/net/ngbe/base/meson.build
+++ b/drivers/net/ngbe/base/meson.build
@@ -2,7 +2,9 @@
# Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
sources = [
+ 'ngbe_eeprom.c',
'ngbe_hw.c',
+ 'ngbe_mng.c',
]
error_cflags = []
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index ce6156b697..c9c17dcad8 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -28,9 +28,32 @@
static inline void ngbe_bus_set_lan_id_dummy(struct ngbe_hw *TUP0)
{
}
+/* struct ngbe_rom_operations */
+static inline s32 ngbe_rom_init_params_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_rom_validate_checksum_dummy(struct ngbe_hw *TUP0,
+ u16 *TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_acquire_swfw_sync_dummy(struct ngbe_hw *TUP0,
+ u32 TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
+ u32 TUP1)
+{
+}
static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
{
hw->bus.set_lan_id = ngbe_bus_set_lan_id_dummy;
+ hw->rom.init_params = ngbe_rom_init_params_dummy;
+ hw->rom.validate_checksum = ngbe_rom_validate_checksum_dummy;
+ hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
+ hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
}
#endif /* _NGBE_TYPE_DUMMY_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_eeprom.c b/drivers/net/ngbe/base/ngbe_eeprom.c
new file mode 100644
index 0000000000..3dcd5c2f6c
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_eeprom.c
@@ -0,0 +1,203 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include "ngbe_hw.h"
+#include "ngbe_mng.h"
+#include "ngbe_eeprom.h"
+
+/**
+ * ngbe_init_eeprom_params - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ngbe_rom_info within the
+ * ngbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ngbe_init_eeprom_params(struct ngbe_hw *hw)
+{
+ struct ngbe_rom_info *eeprom = &hw->rom;
+ u32 eec;
+ u16 eeprom_size;
+
+ DEBUGFUNC("ngbe_init_eeprom_params");
+
+ if (eeprom->type != ngbe_eeprom_unknown)
+ return 0;
+
+ eeprom->type = ngbe_eeprom_none;
+ /* Set default semaphore delay to 10ms which is a well
+ * tested value
+ */
+ eeprom->semaphore_delay = 10; /*ms*/
+ /* Clear EEPROM page size, it will be initialized as needed */
+ eeprom->word_page_size = 0;
+
+ /*
+ * Check for EEPROM present first.
+ * If not present leave as none
+ */
+ eec = rd32(hw, NGBE_SPISTAT);
+ if (!(eec & NGBE_SPISTAT_BPFLASH)) {
+ eeprom->type = ngbe_eeprom_flash;
+
+ /*
+ * SPI EEPROM is assumed here. This code would need to
+ * change if a future EEPROM is not SPI.
+ */
+ eeprom_size = 4096;
+ eeprom->word_size = eeprom_size >> 1;
+ }
+
+ eeprom->address_bits = 16;
+ eeprom->sw_addr = 0x80;
+
+ DEBUGOUT("eeprom params: type = %d, size = %d, address bits: "
+ "%d %d\n", eeprom->type, eeprom->word_size,
+ eeprom->address_bits, eeprom->sw_addr);
+
+ return 0;
+}
+
+/**
+ * ngbe_get_eeprom_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+s32 ngbe_get_eeprom_semaphore(struct ngbe_hw *hw)
+{
+ s32 status = NGBE_ERR_EEPROM;
+ u32 timeout = 2000;
+ u32 i;
+ u32 swsm;
+
+ DEBUGFUNC("ngbe_get_eeprom_semaphore");
+
+
+ /* Get SMBI software semaphore between device drivers first */
+ for (i = 0; i < timeout; i++) {
+ /*
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = rd32(hw, NGBE_SWSEM);
+ if (!(swsm & NGBE_SWSEM_PF)) {
+ status = 0;
+ break;
+ }
+ usec_delay(50);
+ }
+
+ if (i == timeout) {
+ DEBUGOUT("Driver can't access the eeprom - SMBI Semaphore "
+ "not granted.\n");
+ /*
+ * this release is particularly important because our attempts
+ * above to get the semaphore may have succeeded, and if there
+ * was a timeout, we should unconditionally clear the semaphore
+ * bits to free the driver to make progress
+ */
+ ngbe_release_eeprom_semaphore(hw);
+
+ usec_delay(50);
+ /*
+ * one last try
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = rd32(hw, NGBE_SWSEM);
+ if (!(swsm & NGBE_SWSEM_PF))
+ status = 0;
+ }
+
+ /* Now get the semaphore between SW/FW through the SWESMBI bit */
+ if (status == 0) {
+ for (i = 0; i < timeout; i++) {
+ /* Set the SW EEPROM semaphore bit to request access */
+ wr32m(hw, NGBE_MNGSWSYNC,
+ NGBE_MNGSWSYNC_REQ, NGBE_MNGSWSYNC_REQ);
+
+ /*
+ * If we set the bit successfully then we got the
+ * semaphore.
+ */
+ swsm = rd32(hw, NGBE_MNGSWSYNC);
+ if (swsm & NGBE_MNGSWSYNC_REQ)
+ break;
+
+ usec_delay(50);
+ }
+
+ /*
+ * Release semaphores and return error if SW EEPROM semaphore
+ * was not granted because we don't have access to the EEPROM
+ */
+ if (i >= timeout) {
+ DEBUGOUT("SWESMBI Software EEPROM semaphore not granted.\n");
+ ngbe_release_eeprom_semaphore(hw);
+ status = NGBE_ERR_EEPROM;
+ }
+ } else {
+ DEBUGOUT("Software semaphore SMBI between device drivers "
+ "not granted.\n");
+ }
+
+ return status;
+}
+
+/**
+ * ngbe_release_eeprom_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+void ngbe_release_eeprom_semaphore(struct ngbe_hw *hw)
+{
+ DEBUGFUNC("ngbe_release_eeprom_semaphore");
+
+ wr32m(hw, NGBE_MNGSWSYNC, NGBE_MNGSWSYNC_REQ, 0);
+ wr32m(hw, NGBE_SWSEM, NGBE_SWSEM_PF, 0);
+ ngbe_flush(hw);
+}
+
+/**
+ * ngbe_validate_eeprom_checksum_em - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ngbe_validate_eeprom_checksum_em(struct ngbe_hw *hw,
+ u16 *checksum_val)
+{
+ u32 eeprom_cksum_devcap = 0;
+ int err = 0;
+
+ DEBUGFUNC("ngbe_validate_eeprom_checksum_em");
+ UNREFERENCED_PARAMETER(checksum_val);
+
+ /* Check EEPROM only once */
+ if (hw->bus.lan_id == 0) {
+ wr32(hw, NGBE_CALSUM_CAP_STATUS, 0x0);
+ wr32(hw, NGBE_EEPROM_VERSION_STORE_REG, 0x0);
+ } else {
+ eeprom_cksum_devcap = rd32(hw, NGBE_CALSUM_CAP_STATUS);
+ hw->rom.saved_version = rd32(hw, NGBE_EEPROM_VERSION_STORE_REG);
+ }
+
+ if (hw->bus.lan_id == 0 || eeprom_cksum_devcap == 0) {
+ err = ngbe_hic_check_cap(hw);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR,
+ "The EEPROM checksum is not valid: %d", err);
+ return -EIO;
+ }
+ }
+
+ hw->rom.cksum_devcap = eeprom_cksum_devcap & 0xffff;
+
+ return err;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_eeprom.h b/drivers/net/ngbe/base/ngbe_eeprom.h
new file mode 100644
index 0000000000..b433077629
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_eeprom.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_EEPROM_H_
+#define _NGBE_EEPROM_H_
+
+#define NGBE_CALSUM_CAP_STATUS 0x10224
+#define NGBE_EEPROM_VERSION_STORE_REG 0x1022C
+
+s32 ngbe_init_eeprom_params(struct ngbe_hw *hw);
+s32 ngbe_validate_eeprom_checksum_em(struct ngbe_hw *hw, u16 *checksum_val);
+s32 ngbe_get_eeprom_semaphore(struct ngbe_hw *hw);
+void ngbe_release_eeprom_semaphore(struct ngbe_hw *hw);
+
+#endif /* _NGBE_EEPROM_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index c40215e43e..a9819e4a84 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -4,6 +4,8 @@
*/
#include "ngbe_type.h"
+#include "ngbe_eeprom.h"
+#include "ngbe_mng.h"
#include "ngbe_hw.h"
/**
@@ -25,6 +27,77 @@ void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw)
bus->func = bus->lan_id;
}
+/**
+ * ngbe_acquire_swfw_sync - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore through the MNGSEM register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask)
+{
+ u32 mngsem = 0;
+ u32 swmask = NGBE_MNGSEM_SW(mask);
+ u32 fwmask = NGBE_MNGSEM_FW(mask);
+ u32 timeout = 200;
+ u32 i;
+
+ DEBUGFUNC("ngbe_acquire_swfw_sync");
+
+ for (i = 0; i < timeout; i++) {
+ /*
+ * SW NVM semaphore bit is used for access to all
+ * SW_FW_SYNC bits (not just NVM)
+ */
+ if (ngbe_get_eeprom_semaphore(hw))
+ return NGBE_ERR_SWFW_SYNC;
+
+ mngsem = rd32(hw, NGBE_MNGSEM);
+ if (mngsem & (fwmask | swmask)) {
+ /* Resource is currently in use by FW or SW */
+ ngbe_release_eeprom_semaphore(hw);
+ msec_delay(5);
+ } else {
+ mngsem |= swmask;
+ wr32(hw, NGBE_MNGSEM, mngsem);
+ ngbe_release_eeprom_semaphore(hw);
+ return 0;
+ }
+ }
+
+ /* If time expired clear the bits holding the lock and retry */
+ if (mngsem & (fwmask | swmask))
+ ngbe_release_swfw_sync(hw, mngsem & (fwmask | swmask));
+
+ msec_delay(5);
+ return NGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ * ngbe_release_swfw_sync - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through the MNGSEM register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
+{
+ u32 mngsem;
+ u32 swmask = mask;
+
+ DEBUGFUNC("ngbe_release_swfw_sync");
+
+ ngbe_get_eeprom_semaphore(hw);
+
+ mngsem = rd32(hw, NGBE_MNGSEM);
+ mngsem &= ~swmask;
+ wr32(hw, NGBE_MNGSEM, mngsem);
+
+ ngbe_release_eeprom_semaphore(hw);
+}
+
/**
* ngbe_set_mac_type - Sets MAC type
* @hw: pointer to the HW structure
@@ -134,12 +207,22 @@ void ngbe_map_device_id(struct ngbe_hw *hw)
s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
{
struct ngbe_bus_info *bus = &hw->bus;
+ struct ngbe_mac_info *mac = &hw->mac;
+ struct ngbe_rom_info *rom = &hw->rom;
DEBUGFUNC("ngbe_init_ops_pf");
/* BUS */
bus->set_lan_id = ngbe_set_lan_id_multi_port;
+ /* MAC */
+ mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
+ mac->release_swfw_sync = ngbe_release_swfw_sync;
+
+ /* EEPROM */
+ rom->init_params = ngbe_init_eeprom_params;
+ rom->validate_checksum = ngbe_validate_eeprom_checksum_em;
+
return 0;
}
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index a33776552b..a7b80f8200 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -10,6 +10,9 @@
void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
+s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
+void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
+
s32 ngbe_init_shared_code(struct ngbe_hw *hw);
s32 ngbe_set_mac_type(struct ngbe_hw *hw);
s32 ngbe_init_ops_pf(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_mng.c b/drivers/net/ngbe/base/ngbe_mng.c
new file mode 100644
index 0000000000..6ad2838ea7
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_mng.c
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include "ngbe_type.h"
+#include "ngbe_mng.h"
+
+/**
+ * ngbe_hic_unlocked - Issue command to manageability block unlocked
+ * @hw: pointer to the HW structure
+ * @buffer: command to write and where the return status will be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ *
+ * Communicates with the manageability block. On success return 0
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or NGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ *
+ * This function assumes that the NGBE_MNGSEM_SWMBX semaphore is held
+ * by the caller.
+ **/
+static s32
+ngbe_hic_unlocked(struct ngbe_hw *hw, u32 *buffer, u32 length, u32 timeout)
+{
+ u32 value, loop;
+ u16 i, dword_len;
+
+ DEBUGFUNC("ngbe_hic_unlocked");
+
+ if (!length || length > NGBE_PMMBX_BSIZE) {
+ DEBUGOUT("Buffer length failure buffersize=%d.\n", length);
+ return NGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ /* Calculate length in DWORDs. We must be DWORD aligned */
+ if (length % sizeof(u32)) {
+ DEBUGOUT("Buffer length failure, not aligned to dword");
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ dword_len = length >> 2;
+
+ /* The device driver writes the relevant command block
+ * into the ram area.
+ */
+ for (i = 0; i < dword_len; i++) {
+ wr32a(hw, NGBE_MNGMBX, i, cpu_to_le32(buffer[i]));
+ buffer[i] = rd32a(hw, NGBE_MNGMBX, i);
+ }
+ ngbe_flush(hw);
+
+ /* Setting this bit tells the ARC that a new command is pending. */
+ wr32m(hw, NGBE_MNGMBXCTL,
+ NGBE_MNGMBXCTL_SWRDY, NGBE_MNGMBXCTL_SWRDY);
+
+ /* Check command completion */
+ loop = po32m(hw, NGBE_MNGMBXCTL,
+ NGBE_MNGMBXCTL_FWRDY, NGBE_MNGMBXCTL_FWRDY,
+ &value, timeout, 1000);
+ if (!loop || !(value & NGBE_MNGMBXCTL_FWACK)) {
+ DEBUGOUT("Command has failed with no status valid.\n");
+ return NGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ return 0;
+}
+
+/**
+ * ngbe_host_interface_command - Issue command to manageability block
+ * @hw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
+ *
+ * Communicates with the manageability block. On success return 0
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or NGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+static s32
+ngbe_host_interface_command(struct ngbe_hw *hw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data)
+{
+ u32 hdr_size = sizeof(struct ngbe_hic_hdr);
+ struct ngbe_hic_hdr *resp = (struct ngbe_hic_hdr *)buffer;
+ u16 buf_len;
+ s32 err;
+ u32 bi;
+ u32 dword_len;
+
+ DEBUGFUNC("ngbe_host_interface_command");
+
+ if (length == 0 || length > NGBE_PMMBX_BSIZE) {
+ DEBUGOUT("Buffer length failure buffersize=%d.\n", length);
+ return NGBE_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ /* Take management host interface semaphore */
+ err = hw->mac.acquire_swfw_sync(hw, NGBE_MNGSEM_SWMBX);
+ if (err)
+ return err;
+
+ err = ngbe_hic_unlocked(hw, buffer, length, timeout);
+ if (err)
+ goto rel_out;
+
+ if (!return_data)
+ goto rel_out;
+
+ /* Calculate length in DWORDs */
+ dword_len = hdr_size >> 2;
+
+ /* first pull in the header so we know the buffer length */
+ for (bi = 0; bi < dword_len; bi++)
+ buffer[bi] = rd32a(hw, NGBE_MNGMBX, bi);
+
+ /*
+ * If there is any thing in data position pull it in
+ * Read Flash command requires reading buffer length from
+ * two byes instead of one byte
+ */
+ if (resp->cmd == 0x30) {
+ for (; bi < dword_len + 2; bi++)
+ buffer[bi] = rd32a(hw, NGBE_MNGMBX, bi);
+
+ buf_len = (((u16)(resp->cmd_or_resp.ret_status) << 3)
+ & 0xF00) | resp->buf_len;
+ hdr_size += (2 << 2);
+ } else {
+ buf_len = resp->buf_len;
+ }
+ if (!buf_len)
+ goto rel_out;
+
+ if (length < buf_len + hdr_size) {
+ DEBUGOUT("Buffer not large enough for reply message.\n");
+ err = NGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto rel_out;
+ }
+
+ /* Calculate length in DWORDs, add 3 for odd lengths */
+ dword_len = (buf_len + 3) >> 2;
+
+ /* Pull in the rest of the buffer (bi is where we left off) */
+ for (; bi <= dword_len; bi++)
+ buffer[bi] = rd32a(hw, NGBE_MNGMBX, bi);
+
+rel_out:
+ hw->mac.release_swfw_sync(hw, NGBE_MNGSEM_SWMBX);
+
+ return err;
+}
+
+s32 ngbe_hic_check_cap(struct ngbe_hw *hw)
+{
+ struct ngbe_hic_read_shadow_ram command;
+ s32 err;
+ int i;
+
+ DEBUGFUNC("\n");
+
+ command.hdr.req.cmd = FW_EEPROM_CHECK_STATUS;
+ command.hdr.req.buf_lenh = 0;
+ command.hdr.req.buf_lenl = 0;
+ command.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ command.address = 0;
+ /* one word */
+ command.length = 0;
+
+ for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+ err = ngbe_host_interface_command(hw, (u32 *)&command,
+ sizeof(command),
+ NGBE_HI_COMMAND_TIMEOUT, true);
+ if (err)
+ continue;
+
+ command.hdr.rsp.ret_status &= 0x1F;
+ if (command.hdr.rsp.ret_status !=
+ FW_CEM_RESP_STATUS_SUCCESS)
+ err = NGBE_ERR_HOST_INTERFACE_COMMAND;
+
+ break;
+ }
+
+ if (!err && command.address != FW_CHECKSUM_CAP_ST_PASS)
+ err = NGBE_ERR_EEPROM_CHECKSUM;
+
+ return err;
+}
diff --git a/drivers/net/ngbe/base/ngbe_mng.h b/drivers/net/ngbe/base/ngbe_mng.h
new file mode 100644
index 0000000000..e86893101b
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_mng.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_MNG_H_
+#define _NGBE_MNG_H_
+
+#include "ngbe_type.h"
+
+#define NGBE_PMMBX_QSIZE 64 /* Num of dwords in range */
+#define NGBE_PMMBX_BSIZE (NGBE_PMMBX_QSIZE * 4)
+#define NGBE_HI_COMMAND_TIMEOUT 5000 /* Process HI command limit */
+
+/* CEM Support */
+#define FW_CEM_MAX_RETRIES 3
+#define FW_CEM_RESP_STATUS_SUCCESS 0x1
+#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */
+#define FW_EEPROM_CHECK_STATUS 0xE9
+
+#define FW_CHECKSUM_CAP_ST_PASS 0x80658383
+#define FW_CHECKSUM_CAP_ST_FAIL 0x70657376
+
+/* Host Interface Command Structures */
+struct ngbe_hic_hdr {
+ u8 cmd;
+ u8 buf_len;
+ union {
+ u8 cmd_resv;
+ u8 ret_status;
+ } cmd_or_resp;
+ u8 checksum;
+};
+
+struct ngbe_hic_hdr2_req {
+ u8 cmd;
+ u8 buf_lenh;
+ u8 buf_lenl;
+ u8 checksum;
+};
+
+struct ngbe_hic_hdr2_rsp {
+ u8 cmd;
+ u8 buf_lenl;
+ u8 ret_status; /* 7-5: high bits of buf_len, 4-0: status */
+ u8 checksum;
+};
+
+union ngbe_hic_hdr2 {
+ struct ngbe_hic_hdr2_req req;
+ struct ngbe_hic_hdr2_rsp rsp;
+};
+
+/* These need to be dword aligned */
+struct ngbe_hic_read_shadow_ram {
+ union ngbe_hic_hdr2 hdr;
+ u32 address;
+ u16 length;
+ u16 pad2;
+ u16 data;
+ u16 pad3;
+};
+
+s32 ngbe_hic_check_cap(struct ngbe_hw *hw);
+#endif /* _NGBE_MNG_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 1d11045a6c..689184b368 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -10,6 +10,13 @@
#include "ngbe_osdep.h"
#include "ngbe_devids.h"
+enum ngbe_eeprom_type {
+ ngbe_eeprom_unknown = 0,
+ ngbe_eeprom_spi,
+ ngbe_eeprom_flash,
+ ngbe_eeprom_none /* No NVM support */
+};
+
enum ngbe_mac_type {
ngbe_mac_unknown = 0,
ngbe_mac_em,
@@ -49,7 +56,23 @@ struct ngbe_bus_info {
u8 lan_id;
};
+struct ngbe_rom_info {
+ s32 (*init_params)(struct ngbe_hw *hw);
+ s32 (*validate_checksum)(struct ngbe_hw *hw, u16 *checksum_val);
+
+ enum ngbe_eeprom_type type;
+ u32 semaphore_delay;
+ u16 word_size;
+ u16 address_bits;
+ u16 word_page_size;
+ u32 sw_addr;
+ u32 saved_version;
+ u16 cksum_devcap;
+};
+
struct ngbe_mac_info {
+ s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+ void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
enum ngbe_mac_type type;
};
@@ -63,6 +86,7 @@ struct ngbe_hw {
void *back;
struct ngbe_mac_info mac;
struct ngbe_phy_info phy;
+ struct ngbe_rom_info rom;
struct ngbe_bus_info bus;
u16 device_id;
u16 vendor_id;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index f94c5d9306..4548ddd1c4 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -32,6 +32,29 @@ static const struct rte_pci_id pci_id_ngbe_map[] = {
{ .vendor_id = 0, /* sentinel */ },
};
+/*
+ * Ensure that all locks are released before first NVM or PHY access
+ */
+static void
+ngbe_swfw_lock_reset(struct ngbe_hw *hw)
+{
+ uint16_t mask;
+
+ /*
+ * These ones are more tricky since they are common to all ports; but
+ * swfw_sync retries last long enough (1s) to be almost sure that if
+ * lock can not be taken it is due to an improper lock of the
+ * semaphore.
+ */
+ mask = NGBE_MNGSEM_SWPHY |
+ NGBE_MNGSEM_SWMBX |
+ NGBE_MNGSEM_SWFLASH;
+ if (hw->mac.acquire_swfw_sync(hw, mask) < 0)
+ PMD_DRV_LOG(DEBUG, "SWFW common locks released");
+
+ hw->mac.release_swfw_sync(hw, mask);
+}
+
static int
eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
{
@@ -60,6 +83,22 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -EIO;
}
+ /* Unlock any pending hardware semaphore */
+ ngbe_swfw_lock_reset(hw);
+
+ err = hw->rom.init_params(hw);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR, "The EEPROM init failed: %d", err);
+ return -EIO;
+ }
+
+ /* Make sure we have a good EEPROM before we read from it */
+ err = hw->rom.validate_checksum(hw, NULL);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR, "The EEPROM checksum is not valid: %d", err);
+ return -EIO;
+ }
+
return 0;
}
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 07/19] net/ngbe: add HW initialization
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (5 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 06/19] net/ngbe: init and validate EEPROM Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 08/19] net/ngbe: identify PHY and reset PHY Jiawen Wu
` (12 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Initialize the hardware by resetting the hardware in base code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_dummy.h | 21 +++
drivers/net/ngbe/base/ngbe_hw.c | 235 +++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 9 ++
drivers/net/ngbe/base/ngbe_type.h | 30 ++++
drivers/net/ngbe/ngbe_ethdev.c | 16 ++
5 files changed, 311 insertions(+)
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index c9c17dcad8..3445e7475a 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -38,6 +38,19 @@ static inline s32 ngbe_rom_validate_checksum_dummy(struct ngbe_hw *TUP0,
{
return NGBE_ERR_OPS_DUMMY;
}
+/* struct ngbe_mac_operations */
+static inline s32 ngbe_mac_init_hw_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_reset_hw_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_stop_hw_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_acquire_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
@@ -47,13 +60,21 @@ static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
}
+static inline s32 ngbe_mac_init_thermal_ssth_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
{
hw->bus.set_lan_id = ngbe_bus_set_lan_id_dummy;
hw->rom.init_params = ngbe_rom_init_params_dummy;
hw->rom.validate_checksum = ngbe_rom_validate_checksum_dummy;
+ hw->mac.init_hw = ngbe_mac_init_hw_dummy;
+ hw->mac.reset_hw = ngbe_mac_reset_hw_dummy;
+ hw->mac.stop_hw = ngbe_mac_stop_hw_dummy;
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
+ hw->mac.init_thermal_sensor_thresh = ngbe_mac_init_thermal_ssth_dummy;
}
#endif /* _NGBE_TYPE_DUMMY_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index a9819e4a84..446f4b52b5 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -8,6 +8,133 @@
#include "ngbe_mng.h"
#include "ngbe_hw.h"
+/**
+ * ngbe_init_hw - Generic hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware, filling the bus info
+ * structure and media type, clears all on chip counters, initializes receive
+ * address registers, multicast table, VLAN filter table, calls routine to set
+ * up link and flow control settings, and leaves transmit and receive units
+ * disabled and uninitialized
+ **/
+s32 ngbe_init_hw(struct ngbe_hw *hw)
+{
+ s32 status;
+
+ DEBUGFUNC("ngbe_init_hw");
+
+ /* Reset the hardware */
+ status = hw->mac.reset_hw(hw);
+
+ if (status != 0)
+ DEBUGOUT("Failed to initialize HW, STATUS = %d\n", status);
+
+ return status;
+}
+
+static void
+ngbe_reset_misc_em(struct ngbe_hw *hw)
+{
+ int i;
+
+ wr32(hw, NGBE_ISBADDRL, hw->isb_dma & 0xFFFFFFFF);
+ wr32(hw, NGBE_ISBADDRH, hw->isb_dma >> 32);
+
+ /* receive packets that size > 2048 */
+ wr32m(hw, NGBE_MACRXCFG,
+ NGBE_MACRXCFG_JUMBO, NGBE_MACRXCFG_JUMBO);
+
+ wr32m(hw, NGBE_FRMSZ, NGBE_FRMSZ_MAX_MASK,
+ NGBE_FRMSZ_MAX(NGBE_FRAME_SIZE_DFT));
+
+ /* clear counters on read */
+ wr32m(hw, NGBE_MACCNTCTL,
+ NGBE_MACCNTCTL_RC, NGBE_MACCNTCTL_RC);
+
+ wr32m(hw, NGBE_RXFCCFG,
+ NGBE_RXFCCFG_FC, NGBE_RXFCCFG_FC);
+ wr32m(hw, NGBE_TXFCCFG,
+ NGBE_TXFCCFG_FC, NGBE_TXFCCFG_FC);
+
+ wr32m(hw, NGBE_MACRXFLT,
+ NGBE_MACRXFLT_PROMISC, NGBE_MACRXFLT_PROMISC);
+
+ wr32m(hw, NGBE_RSTSTAT,
+ NGBE_RSTSTAT_TMRINIT_MASK, NGBE_RSTSTAT_TMRINIT(30));
+
+ /* errata 4: initialize mng flex tbl and wakeup flex tbl*/
+ wr32(hw, NGBE_MNGFLEXSEL, 0);
+ for (i = 0; i < 16; i++) {
+ wr32(hw, NGBE_MNGFLEXDWL(i), 0);
+ wr32(hw, NGBE_MNGFLEXDWH(i), 0);
+ wr32(hw, NGBE_MNGFLEXMSK(i), 0);
+ }
+ wr32(hw, NGBE_LANFLEXSEL, 0);
+ for (i = 0; i < 16; i++) {
+ wr32(hw, NGBE_LANFLEXDWL(i), 0);
+ wr32(hw, NGBE_LANFLEXDWH(i), 0);
+ wr32(hw, NGBE_LANFLEXMSK(i), 0);
+ }
+
+ /* set pause frame dst mac addr */
+ wr32(hw, NGBE_RXPBPFCDMACL, 0xC2000001);
+ wr32(hw, NGBE_RXPBPFCDMACH, 0x0180);
+
+ wr32(hw, NGBE_MDIOMODE, 0xF);
+
+ wr32m(hw, NGBE_GPIE, NGBE_GPIE_MSIX, NGBE_GPIE_MSIX);
+
+ if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
+ (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ /* gpio0 is used to power on/off control*/
+ wr32(hw, NGBE_GPIODIR, NGBE_GPIODIR_DDR(1));
+ wr32(hw, NGBE_GPIODATA, NGBE_GPIOBIT_0);
+ }
+
+ hw->mac.init_thermal_sensor_thresh(hw);
+
+ /* enable mac transmitter */
+ wr32m(hw, NGBE_MACTXCFG, NGBE_MACTXCFG_TE, NGBE_MACTXCFG_TE);
+
+ /* sellect GMII */
+ wr32m(hw, NGBE_MACTXCFG,
+ NGBE_MACTXCFG_SPEED_MASK, NGBE_MACTXCFG_SPEED_1G);
+
+ for (i = 0; i < 4; i++)
+ wr32m(hw, NGBE_IVAR(i), 0x80808080, 0);
+}
+
+/**
+ * ngbe_reset_hw_em - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ **/
+s32 ngbe_reset_hw_em(struct ngbe_hw *hw)
+{
+ s32 status;
+
+ DEBUGFUNC("ngbe_reset_hw_em");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = hw->mac.stop_hw(hw);
+ if (status != 0)
+ return status;
+
+ wr32(hw, NGBE_RST, NGBE_RST_LAN(hw->bus.lan_id));
+ ngbe_flush(hw);
+ msec_delay(50);
+
+ ngbe_reset_misc_em(hw);
+
+ msec_delay(50);
+
+ return status;
+}
+
/**
* ngbe_set_lan_id_multi_port - Set LAN id for PCIe multiple port devices
* @hw: pointer to the HW structure
@@ -27,6 +154,57 @@ void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw)
bus->func = bus->lan_id;
}
+/**
+ * ngbe_stop_hw - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ngbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+s32 ngbe_stop_hw(struct ngbe_hw *hw)
+{
+ u32 reg_val;
+ u16 i;
+
+ DEBUGFUNC("ngbe_stop_hw");
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Disable the receive unit */
+ ngbe_disable_rx(hw);
+
+ /* Clear interrupt mask to stop interrupts from being generated */
+ wr32(hw, NGBE_IENMISC, 0);
+ wr32(hw, NGBE_IMS(0), NGBE_IMS_MASK);
+
+ /* Clear any pending interrupts, flush previous writes */
+ wr32(hw, NGBE_ICRMISC, NGBE_ICRMISC_MASK);
+ wr32(hw, NGBE_ICR(0), NGBE_ICR_MASK);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ for (i = 0; i < hw->mac.max_tx_queues; i++)
+ wr32(hw, NGBE_TXCFG(i), NGBE_TXCFG_FLUSH);
+
+ /* Disable the receive unit by stopping each queue */
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ reg_val = rd32(hw, NGBE_RXCFG(i));
+ reg_val &= ~NGBE_RXCFG_ENA;
+ wr32(hw, NGBE_RXCFG(i), reg_val);
+ }
+
+ /* flush all queues disables */
+ ngbe_flush(hw);
+ msec_delay(2);
+
+ return 0;
+}
+
/**
* ngbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
@@ -98,6 +276,54 @@ void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
ngbe_release_eeprom_semaphore(hw);
}
+/**
+ * ngbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw)
+{
+ struct ngbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ DEBUGFUNC("ngbe_init_thermal_sensor_thresh");
+
+ memset(data, 0, sizeof(struct ngbe_thermal_sensor_data));
+
+ if (hw->bus.lan_id != 0)
+ return NGBE_NOT_IMPLEMENTED;
+
+ wr32(hw, NGBE_TSINTR,
+ NGBE_TSINTR_AEN | NGBE_TSINTR_DEN);
+ wr32(hw, NGBE_TSEN, NGBE_TSEN_ENA);
+
+
+ data->sensor[0].alarm_thresh = 115;
+ wr32(hw, NGBE_TSATHRE, 0x344);
+ data->sensor[0].dalarm_thresh = 110;
+ wr32(hw, NGBE_TSDTHRE, 0x330);
+
+ return 0;
+}
+
+void ngbe_disable_rx(struct ngbe_hw *hw)
+{
+ u32 pfdtxgswc;
+
+ pfdtxgswc = rd32(hw, NGBE_PSRCTL);
+ if (pfdtxgswc & NGBE_PSRCTL_LBENA) {
+ pfdtxgswc &= ~NGBE_PSRCTL_LBENA;
+ wr32(hw, NGBE_PSRCTL, pfdtxgswc);
+ hw->mac.set_lben = true;
+ } else {
+ hw->mac.set_lben = false;
+ }
+
+ wr32m(hw, NGBE_PBRXCTL, NGBE_PBRXCTL_ENA, 0);
+ wr32m(hw, NGBE_MACRXCFG, NGBE_MACRXCFG_ENA, 0);
+}
+
/**
* ngbe_set_mac_type - Sets MAC type
* @hw: pointer to the HW structure
@@ -216,13 +442,22 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
bus->set_lan_id = ngbe_set_lan_id_multi_port;
/* MAC */
+ mac->init_hw = ngbe_init_hw;
+ mac->reset_hw = ngbe_reset_hw_em;
+ mac->stop_hw = ngbe_stop_hw;
mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
mac->release_swfw_sync = ngbe_release_swfw_sync;
+ /* Manageability interface */
+ mac->init_thermal_sensor_thresh = ngbe_init_thermal_sensor_thresh;
+
/* EEPROM */
rom->init_params = ngbe_init_eeprom_params;
rom->validate_checksum = ngbe_validate_eeprom_checksum_em;
+ mac->max_rx_queues = NGBE_EM_MAX_RX_QUEUES;
+ mac->max_tx_queues = NGBE_EM_MAX_TX_QUEUES;
+
return 0;
}
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index a7b80f8200..207d4b269d 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -8,11 +8,20 @@
#include "ngbe_type.h"
+#define NGBE_EM_MAX_TX_QUEUES 8
+#define NGBE_EM_MAX_RX_QUEUES 8
+
+s32 ngbe_init_hw(struct ngbe_hw *hw);
+s32 ngbe_reset_hw_em(struct ngbe_hw *hw);
+s32 ngbe_stop_hw(struct ngbe_hw *hw);
+
void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
+s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw);
+void ngbe_disable_rx(struct ngbe_hw *hw);
s32 ngbe_init_shared_code(struct ngbe_hw *hw);
s32 ngbe_set_mac_type(struct ngbe_hw *hw);
s32 ngbe_init_ops_pf(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 689184b368..9741cb7687 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -6,10 +6,25 @@
#ifndef _NGBE_TYPE_H_
#define _NGBE_TYPE_H_
+#define NGBE_FRAME_SIZE_DFT (1522) /* Default frame size, +FCS */
+
+#define NGBE_ALIGN 128 /* as intel did */
+#define NGBE_ISB_SIZE 16
+
#include "ngbe_status.h"
#include "ngbe_osdep.h"
#include "ngbe_devids.h"
+struct ngbe_thermal_diode_data {
+ s16 temp;
+ s16 alarm_thresh;
+ s16 dalarm_thresh;
+};
+
+struct ngbe_thermal_sensor_data {
+ struct ngbe_thermal_diode_data sensor[1];
+};
+
enum ngbe_eeprom_type {
ngbe_eeprom_unknown = 0,
ngbe_eeprom_spi,
@@ -71,9 +86,20 @@ struct ngbe_rom_info {
};
struct ngbe_mac_info {
+ s32 (*init_hw)(struct ngbe_hw *hw);
+ s32 (*reset_hw)(struct ngbe_hw *hw);
+ s32 (*stop_hw)(struct ngbe_hw *hw);
s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+
+ /* Manageability interface */
+ s32 (*init_thermal_sensor_thresh)(struct ngbe_hw *hw);
+
enum ngbe_mac_type type;
+ u32 max_tx_queues;
+ u32 max_rx_queues;
+ struct ngbe_thermal_sensor_data thermal_sensor_data;
+ bool set_lben;
};
struct ngbe_phy_info {
@@ -92,6 +118,10 @@ struct ngbe_hw {
u16 vendor_id;
u16 sub_device_id;
u16 sub_system_id;
+ bool adapter_stopped;
+
+ uint64_t isb_dma;
+ void IOMEM *isb_mem;
bool is_pf;
};
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 4548ddd1c4..db929ac99b 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -60,6 +60,7 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
{
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
struct ngbe_hw *hw = ngbe_dev_hw(eth_dev);
+ const struct rte_memzone *mz;
int err;
PMD_INIT_FUNC_TRACE();
@@ -76,6 +77,15 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
ngbe_map_device_id(hw);
hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
+ /* Reserve memory for interrupt status block */
+ mz = rte_eth_dma_zone_reserve(eth_dev, "ngbe_driver", -1,
+ NGBE_ISB_SIZE, NGBE_ALIGN, SOCKET_ID_ANY);
+ if (mz == NULL)
+ return -ENOMEM;
+
+ hw->isb_dma = TMZ_PADDR(mz);
+ hw->isb_mem = TMZ_VADDR(mz);
+
/* Initialize the shared code (base driver) */
err = ngbe_init_shared_code(hw);
if (err != 0) {
@@ -99,6 +109,12 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -EIO;
}
+ err = hw->mac.init_hw(hw);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR, "Hardware Initialization Failure: %d", err);
+ return -EIO;
+ }
+
return 0;
}
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 08/19] net/ngbe: identify PHY and reset PHY
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (6 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 07/19] net/ngbe: add HW initialization Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 09/19] net/ngbe: store MAC address Jiawen Wu
` (11 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Identify PHY to get the PHY type, and perform a PHY reset.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/meson.build | 4 +
drivers/net/ngbe/base/ngbe_dummy.h | 40 +++
drivers/net/ngbe/base/ngbe_hw.c | 38 +++
drivers/net/ngbe/base/ngbe_hw.h | 2 +
drivers/net/ngbe/base/ngbe_phy.c | 426 +++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_phy.h | 60 ++++
drivers/net/ngbe/base/ngbe_phy_mvl.c | 89 ++++++
drivers/net/ngbe/base/ngbe_phy_mvl.h | 92 ++++++
drivers/net/ngbe/base/ngbe_phy_rtl.c | 65 ++++
drivers/net/ngbe/base/ngbe_phy_rtl.h | 83 ++++++
drivers/net/ngbe/base/ngbe_phy_yt.c | 112 +++++++
drivers/net/ngbe/base/ngbe_phy_yt.h | 67 +++++
drivers/net/ngbe/base/ngbe_type.h | 17 ++
13 files changed, 1095 insertions(+)
create mode 100644 drivers/net/ngbe/base/ngbe_phy.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_mvl.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_mvl.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_rtl.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_rtl.h
create mode 100644 drivers/net/ngbe/base/ngbe_phy_yt.c
create mode 100644 drivers/net/ngbe/base/ngbe_phy_yt.h
diff --git a/drivers/net/ngbe/base/meson.build b/drivers/net/ngbe/base/meson.build
index d206cc6d74..9420786245 100644
--- a/drivers/net/ngbe/base/meson.build
+++ b/drivers/net/ngbe/base/meson.build
@@ -5,6 +5,10 @@ sources = [
'ngbe_eeprom.c',
'ngbe_hw.c',
'ngbe_mng.c',
+ 'ngbe_phy.c',
+ 'ngbe_phy_rtl.c',
+ 'ngbe_phy_mvl.c',
+ 'ngbe_phy_yt.c',
]
error_cflags = []
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 3445e7475a..51ae0acd2c 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -64,6 +64,39 @@ static inline s32 ngbe_mac_init_thermal_ssth_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_mac_check_overtemp_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+/* struct ngbe_phy_operations */
+static inline s32 ngbe_phy_identify_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_phy_reset_hw_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_phy_read_reg_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u32 TUP2, u16 *TUP3)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_phy_write_reg_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u32 TUP2, u16 TUP3)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_phy_read_reg_unlocked_dummy(struct ngbe_hw *TUP0,
+ u32 TUP1, u32 TUP2, u16 *TUP3)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_phy_write_reg_unlocked_dummy(struct ngbe_hw *TUP0,
+ u32 TUP1, u32 TUP2, u16 TUP3)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
{
hw->bus.set_lan_id = ngbe_bus_set_lan_id_dummy;
@@ -75,6 +108,13 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
hw->mac.init_thermal_sensor_thresh = ngbe_mac_init_thermal_ssth_dummy;
+ hw->mac.check_overtemp = ngbe_mac_check_overtemp_dummy;
+ hw->phy.identify = ngbe_phy_identify_dummy;
+ hw->phy.reset_hw = ngbe_phy_reset_hw_dummy;
+ hw->phy.read_reg = ngbe_phy_read_reg_dummy;
+ hw->phy.write_reg = ngbe_phy_write_reg_dummy;
+ hw->phy.read_reg_unlocked = ngbe_phy_read_reg_unlocked_dummy;
+ hw->phy.write_reg_unlocked = ngbe_phy_write_reg_unlocked_dummy;
}
#endif /* _NGBE_TYPE_DUMMY_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 446f4b52b5..662fb17532 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -4,6 +4,7 @@
*/
#include "ngbe_type.h"
+#include "ngbe_phy.h"
#include "ngbe_eeprom.h"
#include "ngbe_mng.h"
#include "ngbe_hw.h"
@@ -124,6 +125,15 @@ s32 ngbe_reset_hw_em(struct ngbe_hw *hw)
if (status != 0)
return status;
+ /* Identify PHY and related function pointers */
+ status = ngbe_init_phy(hw);
+ if (status)
+ return status;
+
+ /* Reset PHY */
+ if (!hw->phy.reset_disable)
+ hw->phy.reset_hw(hw);
+
wr32(hw, NGBE_RST, NGBE_RST_LAN(hw->bus.lan_id));
ngbe_flush(hw);
msec_delay(50);
@@ -307,6 +317,24 @@ s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw)
return 0;
}
+s32 ngbe_mac_check_overtemp(struct ngbe_hw *hw)
+{
+ s32 status = 0;
+ u32 ts_state;
+
+ DEBUGFUNC("ngbe_mac_check_overtemp");
+
+ /* Check that the LASI temp alarm status was triggered */
+ ts_state = rd32(hw, NGBE_TSALM);
+
+ if (ts_state & NGBE_TSALM_HI)
+ status = NGBE_ERR_UNDERTEMP;
+ else if (ts_state & NGBE_TSALM_LO)
+ status = NGBE_ERR_OVERTEMP;
+
+ return status;
+}
+
void ngbe_disable_rx(struct ngbe_hw *hw)
{
u32 pfdtxgswc;
@@ -434,6 +462,7 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
{
struct ngbe_bus_info *bus = &hw->bus;
struct ngbe_mac_info *mac = &hw->mac;
+ struct ngbe_phy_info *phy = &hw->phy;
struct ngbe_rom_info *rom = &hw->rom;
DEBUGFUNC("ngbe_init_ops_pf");
@@ -441,6 +470,14 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
/* BUS */
bus->set_lan_id = ngbe_set_lan_id_multi_port;
+ /* PHY */
+ phy->identify = ngbe_identify_phy;
+ phy->read_reg = ngbe_read_phy_reg;
+ phy->write_reg = ngbe_write_phy_reg;
+ phy->read_reg_unlocked = ngbe_read_phy_reg_mdi;
+ phy->write_reg_unlocked = ngbe_write_phy_reg_mdi;
+ phy->reset_hw = ngbe_reset_phy;
+
/* MAC */
mac->init_hw = ngbe_init_hw;
mac->reset_hw = ngbe_reset_hw_em;
@@ -450,6 +487,7 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
/* Manageability interface */
mac->init_thermal_sensor_thresh = ngbe_init_thermal_sensor_thresh;
+ mac->check_overtemp = ngbe_mac_check_overtemp;
/* EEPROM */
rom->init_params = ngbe_init_eeprom_params;
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 207d4b269d..2205156eb9 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -21,10 +21,12 @@ s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw);
+s32 ngbe_mac_check_overtemp(struct ngbe_hw *hw);
void ngbe_disable_rx(struct ngbe_hw *hw);
s32 ngbe_init_shared_code(struct ngbe_hw *hw);
s32 ngbe_set_mac_type(struct ngbe_hw *hw);
s32 ngbe_init_ops_pf(struct ngbe_hw *hw);
+s32 ngbe_init_phy(struct ngbe_hw *hw);
void ngbe_map_device_id(struct ngbe_hw *hw);
#endif /* _NGBE_HW_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_phy.c b/drivers/net/ngbe/base/ngbe_phy.c
new file mode 100644
index 0000000000..61bb953b6a
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy.c
@@ -0,0 +1,426 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include "ngbe_hw.h"
+#include "ngbe_phy.h"
+
+s32 ngbe_mdi_map_register(mdi_reg_t *reg, mdi_reg_22_t *reg22)
+{
+ bool match = 1;
+ switch (reg->device_type) {
+ case NGBE_MD_DEV_PMA_PMD:
+ switch (reg->addr) {
+ case NGBE_MD_PHY_ID_HIGH:
+ case NGBE_MD_PHY_ID_LOW:
+ reg22->page = 0;
+ reg22->addr = reg->addr;
+ reg22->device_type = 0;
+ break;
+ default:
+ match = 0;
+ }
+ break;
+ default:
+ match = 0;
+ break;
+ }
+
+ if (!match) {
+ reg22->page = reg->device_type;
+ reg22->device_type = reg->device_type;
+ reg22->addr = reg->addr;
+ }
+
+ return 0;
+}
+
+/**
+ * ngbe_probe_phy - Identify a single address for a PHY
+ * @hw: pointer to hardware structure
+ * @phy_addr: PHY address to probe
+ *
+ * Returns true if PHY found
+ */
+static bool ngbe_probe_phy(struct ngbe_hw *hw, u16 phy_addr)
+{
+ if (!ngbe_validate_phy_addr(hw, phy_addr)) {
+ DEBUGOUT("Unable to validate PHY address 0x%04X\n",
+ phy_addr);
+ return false;
+ }
+
+ if (ngbe_get_phy_id(hw))
+ return false;
+
+ hw->phy.type = ngbe_get_phy_type_from_id(hw);
+ if (hw->phy.type == ngbe_phy_unknown)
+ return false;
+
+ return true;
+}
+
+/**
+ * ngbe_identify_phy - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ **/
+s32 ngbe_identify_phy(struct ngbe_hw *hw)
+{
+ s32 err = NGBE_ERR_PHY_ADDR_INVALID;
+ u16 phy_addr;
+
+ DEBUGFUNC("ngbe_identify_phy");
+
+ if (hw->phy.type != ngbe_phy_unknown)
+ return 0;
+
+ /* select clause22 */
+ wr32(hw, NGBE_MDIOMODE, NGBE_MDIOMODE_MASK);
+
+ for (phy_addr = 0; phy_addr < NGBE_MAX_PHY_ADDR; phy_addr++) {
+ if (ngbe_probe_phy(hw, phy_addr)) {
+ err = 0;
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * ngbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the STAT.MNGVETO bit to see if there are
+ * any constraints on link from manageability. For MAC's that don't
+ * have this bit just return faluse since the link can not be blocked
+ * via this method.
+ **/
+s32 ngbe_check_reset_blocked(struct ngbe_hw *hw)
+{
+ u32 mmngc;
+
+ DEBUGFUNC("ngbe_check_reset_blocked");
+
+ mmngc = rd32(hw, NGBE_STAT);
+ if (mmngc & NGBE_STAT_MNGVETO) {
+ DEBUGOUT("MNG_VETO bit detected.\n");
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * ngbe_validate_phy_addr - Determines phy address is valid
+ * @hw: pointer to hardware structure
+ * @phy_addr: PHY address
+ *
+ **/
+bool ngbe_validate_phy_addr(struct ngbe_hw *hw, u32 phy_addr)
+{
+ u16 phy_id = 0;
+ bool valid = false;
+
+ DEBUGFUNC("ngbe_validate_phy_addr");
+
+ if (hw->sub_device_id == NGBE_SUB_DEV_ID_EM_YT8521S_SFP)
+ return true;
+
+ hw->phy.addr = phy_addr;
+ hw->phy.read_reg(hw, NGBE_MD_PHY_ID_HIGH,
+ NGBE_MD_DEV_PMA_PMD, &phy_id);
+
+ if (phy_id != 0xFFFF && phy_id != 0x0)
+ valid = true;
+
+ DEBUGOUT("PHY ID HIGH is 0x%04X\n", phy_id);
+
+ return valid;
+}
+
+/**
+ * ngbe_get_phy_id - Get the phy ID
+ * @hw: pointer to hardware structure
+ *
+ **/
+s32 ngbe_get_phy_id(struct ngbe_hw *hw)
+{
+ u32 err;
+ u16 phy_id_high = 0;
+ u16 phy_id_low = 0;
+
+ DEBUGFUNC("ngbe_get_phy_id");
+
+ err = hw->phy.read_reg(hw, NGBE_MD_PHY_ID_HIGH,
+ NGBE_MD_DEV_PMA_PMD,
+ &phy_id_high);
+ hw->phy.id = (u32)(phy_id_high << 16);
+
+ err = hw->phy.read_reg(hw, NGBE_MD_PHY_ID_LOW,
+ NGBE_MD_DEV_PMA_PMD,
+ &phy_id_low);
+ hw->phy.id |= (u32)(phy_id_low & NGBE_PHY_REVISION_MASK);
+ hw->phy.revision = (u32)(phy_id_low & ~NGBE_PHY_REVISION_MASK);
+
+ DEBUGOUT("PHY_ID_HIGH 0x%04X, PHY_ID_LOW 0x%04X\n",
+ phy_id_high, phy_id_low);
+
+ return err;
+}
+
+/**
+ * ngbe_get_phy_type_from_id - Get the phy type
+ * @phy_id: PHY ID information
+ *
+ **/
+enum ngbe_phy_type ngbe_get_phy_type_from_id(struct ngbe_hw *hw)
+{
+ enum ngbe_phy_type phy_type;
+
+ DEBUGFUNC("ngbe_get_phy_type_from_id");
+
+ switch (hw->phy.id) {
+ case NGBE_PHYID_RTL:
+ phy_type = ngbe_phy_rtl;
+ break;
+ case NGBE_PHYID_MVL:
+ if (hw->phy.media_type == ngbe_media_type_fiber)
+ phy_type = ngbe_phy_mvl_sfi;
+ else
+ phy_type = ngbe_phy_mvl;
+ break;
+ case NGBE_PHYID_YT:
+ if (hw->phy.media_type == ngbe_media_type_fiber)
+ phy_type = ngbe_phy_yt8521s_sfi;
+ else
+ phy_type = ngbe_phy_yt8521s;
+ break;
+ default:
+ phy_type = ngbe_phy_unknown;
+ break;
+ }
+
+ return phy_type;
+}
+
+/**
+ * ngbe_reset_phy - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ngbe_reset_phy(struct ngbe_hw *hw)
+{
+ s32 err = 0;
+
+ DEBUGFUNC("ngbe_reset_phy");
+
+ if (hw->phy.type == ngbe_phy_unknown)
+ err = ngbe_identify_phy(hw);
+
+ if (err != 0 || hw->phy.type == ngbe_phy_none)
+ return err;
+
+ /* Don't reset PHY if it's shut down due to overtemp. */
+ if (hw->mac.check_overtemp(hw) == NGBE_ERR_OVERTEMP)
+ return err;
+
+ /* Blocked by MNG FW so bail */
+ if (ngbe_check_reset_blocked(hw))
+ return err;
+
+ switch (hw->phy.type) {
+ case ngbe_phy_rtl:
+ err = ngbe_reset_phy_rtl(hw);
+ break;
+ case ngbe_phy_mvl:
+ case ngbe_phy_mvl_sfi:
+ err = ngbe_reset_phy_mvl(hw);
+ break;
+ case ngbe_phy_yt8521s:
+ case ngbe_phy_yt8521s_sfi:
+ err = ngbe_reset_phy_yt(hw);
+ break;
+ default:
+ break;
+ }
+
+ return err;
+}
+
+/**
+ * ngbe_read_phy_mdi - Reads a value from a specified PHY register without
+ * the SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: 5 bit device type
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ngbe_read_phy_reg_mdi(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data)
+{
+ u32 command, data;
+
+ /* Setup and write the address cycle command */
+ command = NGBE_MDIOSCA_REG(reg_addr) |
+ NGBE_MDIOSCA_DEV(device_type) |
+ NGBE_MDIOSCA_PORT(hw->phy.addr);
+ wr32(hw, NGBE_MDIOSCA, command);
+
+ command = NGBE_MDIOSCD_CMD_READ |
+ NGBE_MDIOSCD_BUSY |
+ NGBE_MDIOSCD_CLOCK(6);
+ wr32(hw, NGBE_MDIOSCD, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ if (!po32m(hw, NGBE_MDIOSCD, NGBE_MDIOSCD_BUSY,
+ 0, NULL, 100, 100)) {
+ DEBUGOUT("PHY address command did not complete\n");
+ return NGBE_ERR_PHY;
+ }
+
+ data = rd32(hw, NGBE_MDIOSCD);
+ *phy_data = (u16)NGBE_MDIOSCD_DAT_R(data);
+
+ return 0;
+}
+
+/**
+ * ngbe_read_phy_reg - Reads a value from a specified PHY register
+ * using the SWFW lock - this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: 5 bit device type
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ngbe_read_phy_reg(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ s32 err;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ngbe_read_phy_reg");
+
+ if (hw->mac.acquire_swfw_sync(hw, gssr))
+ return NGBE_ERR_SWFW_SYNC;
+
+ err = hw->phy.read_reg_unlocked(hw, reg_addr, device_type,
+ phy_data);
+
+ hw->mac.release_swfw_sync(hw, gssr);
+
+ return err;
+}
+
+/**
+ * ngbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ * without SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ngbe_write_phy_reg_mdi(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ u32 command;
+
+ /* write command */
+ command = NGBE_MDIOSCA_REG(reg_addr) |
+ NGBE_MDIOSCA_DEV(device_type) |
+ NGBE_MDIOSCA_PORT(hw->phy.addr);
+ wr32(hw, NGBE_MDIOSCA, command);
+
+ command = NGBE_MDIOSCD_CMD_WRITE |
+ NGBE_MDIOSCD_DAT(phy_data) |
+ NGBE_MDIOSCD_BUSY |
+ NGBE_MDIOSCD_CLOCK(6);
+ wr32(hw, NGBE_MDIOSCD, command);
+
+ /* wait for completion */
+ if (!po32m(hw, NGBE_MDIOSCD, NGBE_MDIOSCD_BUSY,
+ 0, NULL, 100, 100)) {
+ TLOG_DEBUG("PHY write cmd didn't complete\n");
+ return NGBE_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * ngbe_write_phy_reg - Writes a value to specified PHY register
+ * using SWFW lock- this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ngbe_write_phy_reg(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ s32 err;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ngbe_write_phy_reg");
+
+ if (hw->mac.acquire_swfw_sync(hw, gssr))
+ err = NGBE_ERR_SWFW_SYNC;
+
+ err = hw->phy.write_reg_unlocked(hw, reg_addr, device_type,
+ phy_data);
+
+ hw->mac.release_swfw_sync(hw, gssr);
+
+ return err;
+}
+
+/**
+ * ngbe_init_phy - PHY specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY type was
+ * not known.
+ *
+ **/
+s32 ngbe_init_phy(struct ngbe_hw *hw)
+{
+ struct ngbe_phy_info *phy = &hw->phy;
+ s32 err = 0;
+
+ DEBUGFUNC("ngbe_init_phy");
+
+ hw->phy.addr = 0;
+
+ switch (hw->sub_device_id) {
+ case NGBE_SUB_DEV_ID_EM_RTL_SGMII:
+ hw->phy.read_reg_unlocked = ngbe_read_phy_reg_rtl;
+ hw->phy.write_reg_unlocked = ngbe_write_phy_reg_rtl;
+ break;
+ case NGBE_SUB_DEV_ID_EM_MVL_RGMII:
+ case NGBE_SUB_DEV_ID_EM_MVL_SFP:
+ hw->phy.read_reg_unlocked = ngbe_read_phy_reg_mvl;
+ hw->phy.write_reg_unlocked = ngbe_write_phy_reg_mvl;
+ break;
+ case NGBE_SUB_DEV_ID_EM_YT8521S_SFP:
+ hw->phy.read_reg_unlocked = ngbe_read_phy_reg_yt;
+ hw->phy.write_reg_unlocked = ngbe_write_phy_reg_yt;
+ break;
+ default:
+ break;
+ }
+
+ hw->phy.phy_semaphore_mask = NGBE_MNGSEM_SWPHY;
+
+ /* Identify the PHY */
+ err = phy->identify(hw);
+
+ return err;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_phy.h b/drivers/net/ngbe/base/ngbe_phy.h
new file mode 100644
index 0000000000..226e0189ec
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_PHY_H_
+#define _NGBE_PHY_H_
+
+#include "ngbe_type.h"
+#include "ngbe_phy_rtl.h"
+#include "ngbe_phy_mvl.h"
+#include "ngbe_phy_yt.h"
+
+/******************************************************************************
+ * PHY MDIO Registers:
+ ******************************************************************************/
+#define NGBE_MAX_PHY_ADDR 32
+
+/* (dev_type = 1) */
+#define NGBE_MD_DEV_PMA_PMD 0x1
+#define NGBE_MD_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/
+#define NGBE_MD_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/
+#define NGBE_PHY_REVISION_MASK 0xFFFFFFF0
+
+/* IEEE 802.3 Clause 22 */
+struct mdi_reg_22 {
+ u16 page;
+ u16 addr;
+ u16 device_type;
+};
+typedef struct mdi_reg_22 mdi_reg_22_t;
+
+/* IEEE 802.3ae Clause 45 */
+struct mdi_reg {
+ u16 device_type;
+ u16 addr;
+};
+typedef struct mdi_reg mdi_reg_t;
+
+#define NGBE_MD22_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/
+#define NGBE_MD22_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/
+
+s32 ngbe_mdi_map_register(mdi_reg_t *reg, mdi_reg_22_t *reg22);
+
+bool ngbe_validate_phy_addr(struct ngbe_hw *hw, u32 phy_addr);
+enum ngbe_phy_type ngbe_get_phy_type_from_id(struct ngbe_hw *hw);
+s32 ngbe_get_phy_id(struct ngbe_hw *hw);
+s32 ngbe_identify_phy(struct ngbe_hw *hw);
+s32 ngbe_reset_phy(struct ngbe_hw *hw);
+s32 ngbe_read_phy_reg_mdi(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data);
+s32 ngbe_write_phy_reg_mdi(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 phy_data);
+s32 ngbe_read_phy_reg(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data);
+s32 ngbe_write_phy_reg(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data);
+s32 ngbe_check_reset_blocked(struct ngbe_hw *hw);
+
+#endif /* _NGBE_PHY_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.c b/drivers/net/ngbe/base/ngbe_phy_mvl.c
new file mode 100644
index 0000000000..1248478252
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.c
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#include "ngbe_phy_mvl.h"
+
+#define MVL_PHY_RST_WAIT_PERIOD 5
+
+s32 ngbe_read_phy_reg_mvl(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 *phy_data)
+{
+ mdi_reg_t reg;
+ mdi_reg_22_t reg22;
+
+ reg.device_type = device_type;
+ reg.addr = reg_addr;
+
+ if (hw->phy.media_type == ngbe_media_type_fiber)
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 1);
+ else
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 0);
+
+ ngbe_mdi_map_register(®, ®22);
+
+ ngbe_read_phy_reg_mdi(hw, reg22.addr, reg22.device_type, phy_data);
+
+ return 0;
+}
+
+s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 phy_data)
+{
+ mdi_reg_t reg;
+ mdi_reg_22_t reg22;
+
+ reg.device_type = device_type;
+ reg.addr = reg_addr;
+
+ if (hw->phy.media_type == ngbe_media_type_fiber)
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 1);
+ else
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 0);
+
+ ngbe_mdi_map_register(®, ®22);
+
+ ngbe_write_phy_reg_mdi(hw, reg22.addr, reg22.device_type, phy_data);
+
+ return 0;
+}
+
+s32 ngbe_reset_phy_mvl(struct ngbe_hw *hw)
+{
+ u32 i;
+ u16 ctrl = 0;
+ s32 status = 0;
+
+ DEBUGFUNC("ngbe_reset_phy_mvl");
+
+ if (hw->phy.type != ngbe_phy_mvl && hw->phy.type != ngbe_phy_mvl_sfi)
+ return NGBE_ERR_PHY_TYPE;
+
+ /* select page 18 reg 20 */
+ status = ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 18);
+
+ /* mode select to RGMII-to-copper or RGMII-to-sfi*/
+ if (hw->phy.type == ngbe_phy_mvl)
+ ctrl = MVL_GEN_CTL_MODE_COPPER;
+ else
+ ctrl = MVL_GEN_CTL_MODE_FIBER;
+ status = ngbe_write_phy_reg_mdi(hw, MVL_GEN_CTL, 0, ctrl);
+ /* mode reset */
+ ctrl |= MVL_GEN_CTL_RESET;
+ status = ngbe_write_phy_reg_mdi(hw, MVL_GEN_CTL, 0, ctrl);
+
+ for (i = 0; i < MVL_PHY_RST_WAIT_PERIOD; i++) {
+ status = ngbe_read_phy_reg_mdi(hw, MVL_GEN_CTL, 0, &ctrl);
+ if (!(ctrl & MVL_GEN_CTL_RESET))
+ break;
+ msleep(1);
+ }
+
+ if (i == MVL_PHY_RST_WAIT_PERIOD) {
+ DEBUGOUT("PHY reset polling failed to complete.\n");
+ return NGBE_ERR_RESET_FAILED;
+ }
+
+ return status;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.h b/drivers/net/ngbe/base/ngbe_phy_mvl.h
new file mode 100644
index 0000000000..ca39f3cd58
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#include "ngbe_phy.h"
+
+#ifndef _NGBE_PHY_MVL_H_
+#define _NGBE_PHY_MVL_H_
+
+#define NGBE_PHYID_MVL 0x01410DD0U
+
+/* Page 0 for Copper, Page 1 for Fiber */
+#define MVL_CTRL 0x0
+#define MVL_CTRL_RESET MS16(15, 0x1)
+#define MVL_CTRL_ANE MS16(12, 0x1)
+#define MVL_CTRL_RESTART_AN MS16(9, 0x1)
+#define MVL_ANA 0x4
+/* copper */
+#define MVL_CANA_ASM_PAUSE MS16(11, 0x1)
+#define MVL_CANA_PAUSE MS16(10, 0x1)
+#define MVL_PHY_100BASET_FULL MS16(8, 0x1)
+#define MVL_PHY_100BASET_HALF MS16(7, 0x1)
+#define MVL_PHY_10BASET_FULL MS16(6, 0x1)
+#define MVL_PHY_10BASET_HALF MS16(5, 0x1)
+/* fiber */
+#define MVL_FANA_PAUSE_MASK MS16(7, 0x3)
+#define MVL_FANA_SYM_PAUSE LS16(1, 7, 0x3)
+#define MVL_FANA_ASM_PAUSE LS16(2, 7, 0x3)
+#define MVL_PHY_1000BASEX_HALF MS16(6, 0x1)
+#define MVL_PHY_1000BASEX_FULL MS16(5, 0x1)
+#define MVL_LPAR 0x5
+#define MVL_CLPAR_ASM_PAUSE MS(11, 0x1)
+#define MVL_CLPAR_PAUSE MS(10, 0x1)
+#define MVL_FLPAR_PAUSE_MASK MS(7, 0x3)
+#define MVL_PHY_1000BASET 0x9
+#define MVL_PHY_1000BASET_FULL MS16(9, 0x1)
+#define MVL_PHY_1000BASET_HALF MS16(8, 0x1)
+#define MVL_CTRL1 0x10
+#define MVL_CTRL1_INTR_POL MS16(2, 0x1)
+#define MVL_PHYSR 0x11
+#define MVL_PHYSR_SPEED_MASK MS16(14, 0x3)
+#define MVL_PHYSR_SPEED_1000M LS16(2, 14, 0x3)
+#define MVL_PHYSR_SPEED_100M LS16(1, 14, 0x3)
+#define MVL_PHYSR_SPEED_10M LS16(0, 14, 0x3)
+#define MVL_PHYSR_LINK MS16(10, 0x1)
+#define MVL_INTR_EN 0x12
+#define MVL_INTR_EN_ANC MS16(11, 0x1)
+#define MVL_INTR_EN_LSC MS16(10, 0x1)
+#define MVL_INTR 0x13
+#define MVL_INTR_ANC MS16(11, 0x1)
+#define MVL_INTR_LSC MS16(10, 0x1)
+
+/* Page 2 */
+#define MVL_RGM_CTL2 0x15
+#define MVL_RGM_CTL2_TTC MS16(4, 0x1)
+#define MVL_RGM_CTL2_RTC MS16(5, 0x1)
+/* Page 3 */
+#define MVL_LEDFCR 0x10
+#define MVL_LEDFCR_CTL1 MS16(4, 0xF)
+#define MVL_LEDFCR_CTL1_CONF LS16(6, 4, 0xF)
+#define MVL_LEDFCR_CTL0 MS16(0, 0xF)
+#define MVL_LEDFCR_CTL0_CONF LS16(1, 0, 0xF)
+#define MVL_LEDPCR 0x11
+#define MVL_LEDPCR_CTL1 MS16(2, 0x3)
+#define MVL_LEDPCR_CTL1_CONF LS16(1, 2, 0x3)
+#define MVL_LEDPCR_CTL0 MS16(0, 0x3)
+#define MVL_LEDPCR_CTL0_CONF LS16(1, 0, 0x3)
+#define MVL_LEDTCR 0x12
+#define MVL_LEDTCR_INTR_POL MS16(11, 0x1)
+#define MVL_LEDTCR_INTR_EN MS16(7, 0x1)
+/* Page 18 */
+#define MVL_GEN_CTL 0x14
+#define MVL_GEN_CTL_RESET MS16(15, 0x1)
+#define MVL_GEN_CTL_MODE(v) LS16(v, 0, 0x7)
+#define MVL_GEN_CTL_MODE_COPPER LS16(0, 0, 0x7)
+#define MVL_GEN_CTL_MODE_FIBER LS16(2, 0, 0x7)
+
+/* reg 22 */
+#define MVL_PAGE_SEL 22
+
+/* reg 19_0 INT status*/
+#define MVL_PHY_ANC 0x0800
+#define MVL_PHY_LSC 0x0400
+
+s32 ngbe_read_phy_reg_mvl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data);
+s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 phy_data);
+
+s32 ngbe_reset_phy_mvl(struct ngbe_hw *hw);
+
+#endif /* _NGBE_PHY_MVL_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.c b/drivers/net/ngbe/base/ngbe_phy_rtl.c
new file mode 100644
index 0000000000..400fbe8c1f
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.c
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#include "ngbe_phy_rtl.h"
+
+#define RTL_PHY_RST_WAIT_PERIOD 5
+
+s32 ngbe_read_phy_reg_rtl(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 *phy_data)
+{
+ mdi_reg_t reg;
+ mdi_reg_22_t reg22;
+
+ reg.device_type = device_type;
+ reg.addr = reg_addr;
+ ngbe_mdi_map_register(®, ®22);
+
+ wr32(hw, NGBE_PHY_CONFIG(RTL_PAGE_SELECT), reg22.page);
+ *phy_data = 0xFFFF & rd32(hw, NGBE_PHY_CONFIG(reg22.addr));
+
+ return 0;
+}
+
+s32 ngbe_write_phy_reg_rtl(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 phy_data)
+{
+ mdi_reg_t reg;
+ mdi_reg_22_t reg22;
+
+ reg.device_type = device_type;
+ reg.addr = reg_addr;
+ ngbe_mdi_map_register(®, ®22);
+
+ wr32(hw, NGBE_PHY_CONFIG(RTL_PAGE_SELECT), reg22.page);
+ wr32(hw, NGBE_PHY_CONFIG(reg22.addr), phy_data);
+
+ return 0;
+}
+
+s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw)
+{
+ u16 value = 0, i;
+ s32 status = 0;
+
+ DEBUGFUNC("ngbe_reset_phy_rtl");
+
+ value |= RTL_BMCR_RESET;
+ status = hw->phy.write_reg(hw, RTL_BMCR, RTL_DEV_ZERO, value);
+
+ for (i = 0; i < RTL_PHY_RST_WAIT_PERIOD; i++) {
+ status = hw->phy.read_reg(hw, RTL_BMCR, RTL_DEV_ZERO, &value);
+ if (!(value & RTL_BMCR_RESET))
+ break;
+ msleep(1);
+ }
+
+ if (i == RTL_PHY_RST_WAIT_PERIOD) {
+ DEBUGOUT("PHY reset polling failed to complete.\n");
+ return NGBE_ERR_RESET_FAILED;
+ }
+
+ return status;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.h b/drivers/net/ngbe/base/ngbe_phy_rtl.h
new file mode 100644
index 0000000000..2da5c7b626
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#include "ngbe_phy.h"
+
+#ifndef _NGBE_PHY_RTL_H_
+#define _NGBE_PHY_RTL_H_
+
+#define NGBE_PHYID_RTL 0x001CC800U
+
+/* Page 0 */
+#define RTL_DEV_ZERO 0
+#define RTL_BMCR 0x0
+#define RTL_BMCR_RESET MS16(15, 0x1)
+#define RTL_BMCR_SPEED_SELECT0 MS16(13, 0x1)
+#define RTL_BMCR_ANE MS16(12, 0x1)
+#define RTL_BMCR_RESTART_AN MS16(9, 0x1)
+#define RTL_BMCR_DUPLEX MS16(8, 0x1)
+#define RTL_BMCR_SPEED_SELECT1 MS16(6, 0x1)
+#define RTL_BMSR 0x1
+#define RTL_BMSR_ANC MS16(5, 0x1)
+#define RTL_ID1_OFFSET 0x2
+#define RTL_ID2_OFFSET 0x3
+#define RTL_ID_MASK 0xFFFFFC00U
+#define RTL_ANAR 0x4
+#define RTL_ANAR_APAUSE MS16(11, 0x1)
+#define RTL_ANAR_PAUSE MS16(10, 0x1)
+#define RTL_ANAR_100F MS16(8, 0x1)
+#define RTL_ANAR_100H MS16(7, 0x1)
+#define RTL_ANAR_10F MS16(6, 0x1)
+#define RTL_ANAR_10H MS16(5, 0x1)
+#define RTL_ANLPAR 0x5
+#define RTL_ANLPAR_LP MS16(10, 0x3)
+#define RTL_GBCR 0x9
+#define RTL_GBCR_1000F MS16(9, 0x1)
+/* Page 0xa42*/
+#define RTL_GSR 0x10
+#define RTL_GSR_ST MS16(0, 0x7)
+#define RTL_GSR_ST_LANON MS16(0, 0x3)
+#define RTL_INER 0x12
+#define RTL_INER_LSC MS16(4, 0x1)
+#define RTL_INER_ANC MS16(3, 0x1)
+/* Page 0xa43*/
+#define RTL_PHYSR 0x1A
+#define RTL_PHYSR_SPEED_MASK MS16(4, 0x3)
+#define RTL_PHYSR_SPEED_RES LS16(3, 4, 0x3)
+#define RTL_PHYSR_SPEED_1000M LS16(2, 4, 0x3)
+#define RTL_PHYSR_SPEED_100M LS16(1, 4, 0x3)
+#define RTL_PHYSR_SPEED_10M LS16(0, 4, 0x3)
+#define RTL_PHYSR_DP MS16(3, 0x1)
+#define RTL_PHYSR_RTLS MS16(2, 0x1)
+#define RTL_INSR 0x1D
+#define RTL_INSR_ACCESS MS16(5, 0x1)
+#define RTL_INSR_LSC MS16(4, 0x1)
+#define RTL_INSR_ANC MS16(3, 0x1)
+/* Page 0xa46*/
+#define RTL_SCR 0x14
+#define RTL_SCR_EXTINI MS16(1, 0x1)
+#define RTL_SCR_EFUSE MS16(0, 0x1)
+/* Page 0xa47*/
+/* Page 0xd04*/
+#define RTL_LCR 0x10
+#define RTL_EEELCR 0x11
+#define RTL_LPCR 0x12
+
+/* INTERNAL PHY CONTROL */
+#define RTL_PAGE_SELECT 31
+#define NGBE_INTERNAL_PHY_OFFSET_MAX 32
+#define NGBE_INTERNAL_PHY_ID 0x000732
+
+#define NGBE_INTPHY_LED0 0x0010
+#define NGBE_INTPHY_LED1 0x0040
+#define NGBE_INTPHY_LED2 0x2000
+
+s32 ngbe_read_phy_reg_rtl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data);
+s32 ngbe_write_phy_reg_rtl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 phy_data);
+
+s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw);
+
+#endif /* _NGBE_PHY_RTL_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.c b/drivers/net/ngbe/base/ngbe_phy_yt.c
new file mode 100644
index 0000000000..a5b032240c
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.c
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#include "ngbe_phy_yt.h"
+
+#define YT_PHY_RST_WAIT_PERIOD 5
+
+s32 ngbe_read_phy_reg_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 *phy_data)
+{
+ mdi_reg_t reg;
+ mdi_reg_22_t reg22;
+
+ reg.device_type = device_type;
+ reg.addr = reg_addr;
+
+ ngbe_mdi_map_register(®, ®22);
+
+ /* Read MII reg according to media type */
+ if (hw->phy.media_type == ngbe_media_type_fiber) {
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY,
+ reg22.device_type, YT_SMI_PHY_SDS);
+ ngbe_read_phy_reg_mdi(hw, reg22.addr,
+ reg22.device_type, phy_data);
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY,
+ reg22.device_type, 0);
+ } else {
+ ngbe_read_phy_reg_mdi(hw, reg22.addr,
+ reg22.device_type, phy_data);
+ }
+
+ return 0;
+}
+
+s32 ngbe_write_phy_reg_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 phy_data)
+{
+ mdi_reg_t reg;
+ mdi_reg_22_t reg22;
+
+ reg.device_type = device_type;
+ reg.addr = reg_addr;
+
+ ngbe_mdi_map_register(®, ®22);
+
+ /* Write MII reg according to media type */
+ if (hw->phy.media_type == ngbe_media_type_fiber) {
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY,
+ reg22.device_type, YT_SMI_PHY_SDS);
+ ngbe_write_phy_reg_mdi(hw, reg22.addr,
+ reg22.device_type, phy_data);
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY,
+ reg22.device_type, 0);
+ } else {
+ ngbe_write_phy_reg_mdi(hw, reg22.addr,
+ reg22.device_type, phy_data);
+ }
+
+ return 0;
+}
+
+s32 ngbe_read_phy_reg_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 *phy_data)
+{
+ ngbe_write_phy_reg_mdi(hw, 0x1E, device_type, reg_addr);
+ ngbe_read_phy_reg_mdi(hw, 0x1F, device_type, phy_data);
+
+ return 0;
+}
+
+s32 ngbe_write_phy_reg_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 phy_data)
+{
+ ngbe_write_phy_reg_mdi(hw, 0x1E, device_type, reg_addr);
+ ngbe_write_phy_reg_mdi(hw, 0x1F, device_type, phy_data);
+
+ return 0;
+}
+
+s32 ngbe_reset_phy_yt(struct ngbe_hw *hw)
+{
+ u32 i;
+ u16 ctrl = 0;
+ s32 status = 0;
+
+ DEBUGFUNC("ngbe_reset_phy_yt");
+
+ if (hw->phy.type != ngbe_phy_yt8521s &&
+ hw->phy.type != ngbe_phy_yt8521s_sfi)
+ return NGBE_ERR_PHY_TYPE;
+
+ status = hw->phy.read_reg(hw, YT_BCR, 0, &ctrl);
+ /* sds software reset */
+ ctrl |= YT_BCR_RESET;
+ status = hw->phy.write_reg(hw, YT_BCR, 0, ctrl);
+
+ for (i = 0; i < YT_PHY_RST_WAIT_PERIOD; i++) {
+ status = hw->phy.read_reg(hw, YT_BCR, 0, &ctrl);
+ if (!(ctrl & YT_BCR_RESET))
+ break;
+ msleep(1);
+ }
+
+ if (i == YT_PHY_RST_WAIT_PERIOD) {
+ DEBUGOUT("PHY reset polling failed to complete.\n");
+ return NGBE_ERR_RESET_FAILED;
+ }
+
+ return status;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.h b/drivers/net/ngbe/base/ngbe_phy_yt.h
new file mode 100644
index 0000000000..6d49464d6d
--- /dev/null
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ */
+
+#include "ngbe_phy.h"
+
+#ifndef _NGBE_PHY_YT_H_
+#define _NGBE_PHY_YT_H_
+
+#define NGBE_PHYID_YT 0x00000110U
+
+/* Common EXT */
+#define YT_SMI_PHY 0xA000
+#define YT_SMI_PHY_SDS MS16(1, 0x1) /* 0 for UTP */
+#define YT_CHIP 0xA001
+#define YT_CHIP_SW_RST MS16(15, 0x1)
+#define YT_CHIP_SW_LDO_EN MS16(6, 0x1)
+#define YT_CHIP_MODE_SEL(v) LS16(v, 0, 0x7)
+#define YT_RGMII_CONF1 0xA003
+#define YT_RGMII_CONF1_RXDELAY MS16(10, 0xF)
+#define YT_RGMII_CONF1_TXDELAY_FE MS16(4, 0xF)
+#define YT_RGMII_CONF1_TXDELAY MS16(0, 0x1)
+#define YT_MISC 0xA006
+#define YT_MISC_FIBER_PRIO MS16(8, 0x1) /* 0 for UTP */
+
+/* MII common registers in UTP and SDS */
+#define YT_BCR 0x0
+#define YT_BCR_RESET MS16(15, 0x1)
+#define YT_BCR_PWDN MS16(11, 0x1)
+#define YT_ANA 0x4
+/* copper */
+#define YT_ANA_100BASET_FULL MS16(8, 0x1)
+#define YT_ANA_10BASET_FULL MS16(6, 0x1)
+/* fiber */
+#define YT_FANA_PAUSE_MASK MS16(7, 0x3)
+
+#define YT_LPAR 0x5
+#define YT_CLPAR_ASM_PAUSE MS(11, 0x1)
+#define YT_CLPAR_PAUSE MS(10, 0x1)
+#define YT_FLPAR_PAUSE_MASK MS(7, 0x3)
+
+#define YT_MS_CTRL 0x9
+#define YT_MS_1000BASET_FULL MS16(9, 0x1)
+#define YT_SPST 0x11
+#define YT_SPST_SPEED_MASK MS16(14, 0x3)
+#define YT_SPST_SPEED_1000M LS16(2, 14, 0x3)
+#define YT_SPST_SPEED_100M LS16(1, 14, 0x3)
+#define YT_SPST_SPEED_10M LS16(0, 14, 0x3)
+#define YT_SPST_LINK MS16(10, 0x1)
+
+/* UTP only */
+#define YT_INTR 0x12
+#define YT_INTR_ENA_MASK MS16(2, 0x3)
+#define YT_INTR_STATUS 0x13
+
+s32 ngbe_read_phy_reg_yt(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data);
+s32 ngbe_write_phy_reg_yt(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 phy_data);
+s32 ngbe_read_phy_reg_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 *phy_data);
+s32 ngbe_write_phy_reg_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 phy_data);
+
+s32 ngbe_reset_phy_yt(struct ngbe_hw *hw);
+
+#endif /* _NGBE_PHY_YT_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 9741cb7687..0eabc21b2b 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -94,6 +94,7 @@ struct ngbe_mac_info {
/* Manageability interface */
s32 (*init_thermal_sensor_thresh)(struct ngbe_hw *hw);
+ s32 (*check_overtemp)(struct ngbe_hw *hw);
enum ngbe_mac_type type;
u32 max_tx_queues;
@@ -103,8 +104,24 @@ struct ngbe_mac_info {
};
struct ngbe_phy_info {
+ s32 (*identify)(struct ngbe_hw *hw);
+ s32 (*reset_hw)(struct ngbe_hw *hw);
+ s32 (*read_reg)(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data);
+ s32 (*write_reg)(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data);
+ s32 (*read_reg_unlocked)(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data);
+ s32 (*write_reg_unlocked)(struct ngbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data);
+
enum ngbe_media_type media_type;
enum ngbe_phy_type type;
+ u32 addr;
+ u32 id;
+ u32 revision;
+ u32 phy_semaphore_mask;
+ bool reset_disable;
};
struct ngbe_hw {
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 09/19] net/ngbe: store MAC address
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (7 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 08/19] net/ngbe: identify PHY and reset PHY Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 10/19] net/ngbe: support link update Jiawen Wu
` (10 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Store MAC addresses and init receive address filters.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_dummy.h | 33 +++
drivers/net/ngbe/base/ngbe_hw.c | 323 +++++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 13 ++
drivers/net/ngbe/base/ngbe_type.h | 19 ++
drivers/net/ngbe/ngbe_ethdev.c | 26 +++
drivers/net/ngbe/ngbe_ethdev.h | 2 +
6 files changed, 416 insertions(+)
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 51ae0acd2c..e5b5bbb5f7 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -51,6 +51,10 @@ static inline s32 ngbe_mac_stop_hw_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_mac_get_mac_addr_dummy(struct ngbe_hw *TUP0, u8 *TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_acquire_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
@@ -60,6 +64,29 @@ static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
}
+static inline s32 ngbe_mac_set_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u8 *TUP2, u32 TUP3, u32 TUP4)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_clear_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_set_vmdq_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u32 TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_clear_vmdq_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ u32 TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_init_rx_addrs_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_init_thermal_ssth_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
@@ -105,8 +132,14 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.init_hw = ngbe_mac_init_hw_dummy;
hw->mac.reset_hw = ngbe_mac_reset_hw_dummy;
hw->mac.stop_hw = ngbe_mac_stop_hw_dummy;
+ hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy;
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
+ hw->mac.set_rar = ngbe_mac_set_rar_dummy;
+ hw->mac.clear_rar = ngbe_mac_clear_rar_dummy;
+ hw->mac.set_vmdq = ngbe_mac_set_vmdq_dummy;
+ hw->mac.clear_vmdq = ngbe_mac_clear_vmdq_dummy;
+ hw->mac.init_rx_addrs = ngbe_mac_init_rx_addrs_dummy;
hw->mac.init_thermal_sensor_thresh = ngbe_mac_init_thermal_ssth_dummy;
hw->mac.check_overtemp = ngbe_mac_check_overtemp_dummy;
hw->phy.identify = ngbe_phy_identify_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 662fb17532..2daddaaf05 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -142,9 +142,49 @@ s32 ngbe_reset_hw_em(struct ngbe_hw *hw)
msec_delay(50);
+ /* Store the permanent mac address */
+ hw->mac.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table.
+ */
+ hw->mac.num_rar_entries = NGBE_EM_RAR_ENTRIES;
+ hw->mac.init_rx_addrs(hw);
+
return status;
}
+/**
+ * ngbe_get_mac_addr - Generic get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
+ *
+ * Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ * A reset of the adapter must be performed prior to calling this function
+ * in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ DEBUGFUNC("ngbe_get_mac_addr");
+
+ wr32(hw, NGBE_ETHADDRIDX, 0);
+ rar_high = rd32(hw, NGBE_ETHADDRH);
+ rar_low = rd32(hw, NGBE_ETHADDRL);
+
+ for (i = 0; i < 2; i++)
+ mac_addr[i] = (u8)(rar_high >> (1 - i) * 8);
+
+ for (i = 0; i < 4; i++)
+ mac_addr[i + 2] = (u8)(rar_low >> (3 - i) * 8);
+
+ return 0;
+}
+
/**
* ngbe_set_lan_id_multi_port - Set LAN id for PCIe multiple port devices
* @hw: pointer to the HW structure
@@ -215,6 +255,196 @@ s32 ngbe_stop_hw(struct ngbe_hw *hw)
return 0;
}
+/**
+ * ngbe_validate_mac_addr - Validate MAC address
+ * @mac_addr: pointer to MAC address.
+ *
+ * Tests a MAC address to ensure it is a valid Individual Address.
+ **/
+s32 ngbe_validate_mac_addr(u8 *mac_addr)
+{
+ s32 status = 0;
+
+ DEBUGFUNC("ngbe_validate_mac_addr");
+
+ /* Make sure it is not a multicast address */
+ if (NGBE_IS_MULTICAST((struct rte_ether_addr *)mac_addr)) {
+ status = NGBE_ERR_INVALID_MAC_ADDR;
+ /* Not a broadcast address */
+ } else if (NGBE_IS_BROADCAST((struct rte_ether_addr *)mac_addr)) {
+ status = NGBE_ERR_INVALID_MAC_ADDR;
+ /* Reject the zero address */
+ } else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
+ status = NGBE_ERR_INVALID_MAC_ADDR;
+ }
+ return status;
+}
+
+/**
+ * ngbe_set_rar - Set Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
+ *
+ * Puts an ethernet address into a receive address register.
+ **/
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
+{
+ u32 rar_low, rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_set_rar");
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", index);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /* setup VMDq pool selection before this RAR gets enabled */
+ hw->mac.set_vmdq(hw, index, vmdq);
+
+ /*
+ * HW expects these in little endian so we reverse the byte
+ * order from network order (big endian) to little endian
+ */
+ rar_low = NGBE_ETHADDRL_AD0(addr[5]) |
+ NGBE_ETHADDRL_AD1(addr[4]) |
+ NGBE_ETHADDRL_AD2(addr[3]) |
+ NGBE_ETHADDRL_AD3(addr[2]);
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = rd32(hw, NGBE_ETHADDRH);
+ rar_high &= ~NGBE_ETHADDRH_AD_MASK;
+ rar_high |= (NGBE_ETHADDRH_AD4(addr[1]) |
+ NGBE_ETHADDRH_AD5(addr[0]));
+
+ rar_high &= ~NGBE_ETHADDRH_VLD;
+ if (enable_addr != 0)
+ rar_high |= NGBE_ETHADDRH_VLD;
+
+ wr32(hw, NGBE_ETHADDRIDX, index);
+ wr32(hw, NGBE_ETHADDRL, rar_low);
+ wr32(hw, NGBE_ETHADDRH, rar_high);
+
+ return 0;
+}
+
+/**
+ * ngbe_clear_rar - Remove Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ *
+ * Clears an ethernet address from a receive address register.
+ **/
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_clear_rar");
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", index);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ wr32(hw, NGBE_ETHADDRIDX, index);
+ rar_high = rd32(hw, NGBE_ETHADDRH);
+ rar_high &= ~(NGBE_ETHADDRH_AD_MASK | NGBE_ETHADDRH_VLD);
+
+ wr32(hw, NGBE_ETHADDRL, 0);
+ wr32(hw, NGBE_ETHADDRH, rar_high);
+
+ /* clear VMDq pool/queue selection for this RAR */
+ hw->mac.clear_vmdq(hw, index, BIT_MASK32);
+
+ return 0;
+}
+
+/**
+ * ngbe_init_rx_addrs - Initializes receive address filters.
+ * @hw: pointer to hardware structure
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ **/
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw)
+{
+ u32 i;
+ u32 psrctl;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_init_rx_addrs");
+
+ /*
+ * If the current mac address is valid, assume it is a software override
+ * to the permanent address.
+ * Otherwise, use the permanent address from the eeprom.
+ */
+ if (ngbe_validate_mac_addr(hw->mac.addr) ==
+ NGBE_ERR_INVALID_MAC_ADDR) {
+ /* Get the MAC address from the RAR0 for later reference */
+ hw->mac.get_mac_addr(hw, hw->mac.addr);
+
+ DEBUGOUT(" Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ DEBUGOUT("%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+ } else {
+ /* Setup the receive address. */
+ DEBUGOUT("Overriding MAC Address in RAR[0]\n");
+ DEBUGOUT(" New MAC Addr =%.2X %.2X %.2X ",
+ hw->mac.addr[0], hw->mac.addr[1],
+ hw->mac.addr[2]);
+ DEBUGOUT("%.2X %.2X %.2X\n", hw->mac.addr[3],
+ hw->mac.addr[4], hw->mac.addr[5]);
+
+ hw->mac.set_rar(hw, 0, hw->mac.addr, 0, true);
+ }
+
+ /* clear VMDq pool/queue selection for RAR 0 */
+ hw->mac.clear_vmdq(hw, 0, BIT_MASK32);
+
+ /* Zero out the other receive addresses. */
+ DEBUGOUT("Clearing RAR[1-%d]\n", rar_entries - 1);
+ for (i = 1; i < rar_entries; i++) {
+ wr32(hw, NGBE_ETHADDRIDX, i);
+ wr32(hw, NGBE_ETHADDRL, 0);
+ wr32(hw, NGBE_ETHADDRH, 0);
+ }
+
+ /* Clear the MTA */
+ hw->addr_ctrl.mta_in_use = 0;
+ psrctl = rd32(hw, NGBE_PSRCTL);
+ psrctl &= ~(NGBE_PSRCTL_ADHF12_MASK | NGBE_PSRCTL_MCHFENA);
+ psrctl |= NGBE_PSRCTL_ADHF12(hw->mac.mc_filter_type);
+ wr32(hw, NGBE_PSRCTL, psrctl);
+
+ DEBUGOUT(" Clearing MTA\n");
+ for (i = 0; i < hw->mac.mcft_size; i++)
+ wr32(hw, NGBE_MCADDRTBL(i), 0);
+
+ ngbe_init_uta_tables(hw);
+
+ return 0;
+}
+
/**
* ngbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
@@ -286,6 +516,89 @@ void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
ngbe_release_eeprom_semaphore(hw);
}
+/**
+ * ngbe_clear_vmdq - Disassociate a VMDq pool index from a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to disassociate
+ * @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_clear_vmdq");
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", rar);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ wr32(hw, NGBE_ETHADDRIDX, rar);
+ mpsar = rd32(hw, NGBE_ETHADDRASS);
+
+ if (NGBE_REMOVED(hw->hw_addr))
+ goto done;
+
+ if (!mpsar)
+ goto done;
+
+ mpsar &= ~(1 << vmdq);
+ wr32(hw, NGBE_ETHADDRASS, mpsar);
+
+ /* was that the last pool using this rar? */
+ if (mpsar == 0 && rar != 0)
+ hw->mac.clear_rar(hw, rar);
+done:
+ return 0;
+}
+
+/**
+ * ngbe_set_vmdq - Associate a VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq pool index
+ **/
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ DEBUGFUNC("ngbe_set_vmdq");
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ DEBUGOUT("RAR index %d is out of range.\n", rar);
+ return NGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ wr32(hw, NGBE_ETHADDRIDX, rar);
+
+ mpsar = rd32(hw, NGBE_ETHADDRASS);
+ mpsar |= 1 << vmdq;
+ wr32(hw, NGBE_ETHADDRASS, mpsar);
+
+ return 0;
+}
+
+/**
+ * ngbe_init_uta_tables - Initialize the Unicast Table Array
+ * @hw: pointer to hardware structure
+ **/
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw)
+{
+ int i;
+
+ DEBUGFUNC("ngbe_init_uta_tables");
+ DEBUGOUT(" Clearing UTA\n");
+
+ for (i = 0; i < 128; i++)
+ wr32(hw, NGBE_UCADDRTBL(i), 0);
+
+ return 0;
+}
+
/**
* ngbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
* @hw: pointer to hardware structure
@@ -481,10 +794,18 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
/* MAC */
mac->init_hw = ngbe_init_hw;
mac->reset_hw = ngbe_reset_hw_em;
+ mac->get_mac_addr = ngbe_get_mac_addr;
mac->stop_hw = ngbe_stop_hw;
mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
mac->release_swfw_sync = ngbe_release_swfw_sync;
+ /* RAR */
+ mac->set_rar = ngbe_set_rar;
+ mac->clear_rar = ngbe_clear_rar;
+ mac->init_rx_addrs = ngbe_init_rx_addrs;
+ mac->set_vmdq = ngbe_set_vmdq;
+ mac->clear_vmdq = ngbe_clear_vmdq;
+
/* Manageability interface */
mac->init_thermal_sensor_thresh = ngbe_init_thermal_sensor_thresh;
mac->check_overtemp = ngbe_mac_check_overtemp;
@@ -493,6 +814,8 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
rom->init_params = ngbe_init_eeprom_params;
rom->validate_checksum = ngbe_validate_eeprom_checksum_em;
+ mac->mcft_size = NGBE_EM_MC_TBL_SIZE;
+ mac->num_rar_entries = NGBE_EM_RAR_ENTRIES;
mac->max_rx_queues = NGBE_EM_MAX_RX_QUEUES;
mac->max_tx_queues = NGBE_EM_MAX_TX_QUEUES;
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 2205156eb9..875bfa1add 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -10,16 +10,29 @@
#define NGBE_EM_MAX_TX_QUEUES 8
#define NGBE_EM_MAX_RX_QUEUES 8
+#define NGBE_EM_RAR_ENTRIES 32
+#define NGBE_EM_MC_TBL_SIZE 32
s32 ngbe_init_hw(struct ngbe_hw *hw);
s32 ngbe_reset_hw_em(struct ngbe_hw *hw);
s32 ngbe_stop_hw(struct ngbe_hw *hw);
+s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr);
void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
+s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index);
+s32 ngbe_init_rx_addrs(struct ngbe_hw *hw);
+
+s32 ngbe_validate_mac_addr(u8 *mac_addr);
s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
+s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+s32 ngbe_init_uta_tables(struct ngbe_hw *hw);
+
s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw);
s32 ngbe_mac_check_overtemp(struct ngbe_hw *hw);
void ngbe_disable_rx(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 0eabc21b2b..dbf0654db3 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -63,6 +63,10 @@ enum ngbe_media_type {
struct ngbe_hw;
+struct ngbe_addr_filter_info {
+ u32 mta_in_use;
+};
+
/* Bus parameters */
struct ngbe_bus_info {
void (*set_lan_id)(struct ngbe_hw *hw);
@@ -89,14 +93,28 @@ struct ngbe_mac_info {
s32 (*init_hw)(struct ngbe_hw *hw);
s32 (*reset_hw)(struct ngbe_hw *hw);
s32 (*stop_hw)(struct ngbe_hw *hw);
+ s32 (*get_mac_addr)(struct ngbe_hw *hw, u8 *mac_addr);
s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+ /* RAR */
+ s32 (*set_rar)(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+ s32 (*clear_rar)(struct ngbe_hw *hw, u32 index);
+ s32 (*set_vmdq)(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+ s32 (*clear_vmdq)(struct ngbe_hw *hw, u32 rar, u32 vmdq);
+ s32 (*init_rx_addrs)(struct ngbe_hw *hw);
+
/* Manageability interface */
s32 (*init_thermal_sensor_thresh)(struct ngbe_hw *hw);
s32 (*check_overtemp)(struct ngbe_hw *hw);
enum ngbe_mac_type type;
+ u8 addr[ETH_ADDR_LEN];
+ u8 perm_addr[ETH_ADDR_LEN];
+ s32 mc_filter_type;
+ u32 mcft_size;
+ u32 num_rar_entries;
u32 max_tx_queues;
u32 max_rx_queues;
struct ngbe_thermal_sensor_data thermal_sensor_data;
@@ -128,6 +146,7 @@ struct ngbe_hw {
void IOMEM *hw_addr;
void *back;
struct ngbe_mac_info mac;
+ struct ngbe_addr_filter_info addr_ctrl;
struct ngbe_phy_info phy;
struct ngbe_rom_info rom;
struct ngbe_bus_info bus;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index db929ac99b..77a5584fbd 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -115,6 +115,32 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -EIO;
}
+ /* Allocate memory for storing MAC addresses */
+ eth_dev->data->mac_addrs = rte_zmalloc("ngbe", RTE_ETHER_ADDR_LEN *
+ hw->mac.num_rar_entries, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %u bytes needed to store MAC addresses",
+ RTE_ETHER_ADDR_LEN * hw->mac.num_rar_entries);
+ return -ENOMEM;
+ }
+
+ /* Copy the permanent MAC address */
+ rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.perm_addr,
+ ð_dev->data->mac_addrs[0]);
+
+ /* Allocate memory for storing hash filter MAC addresses */
+ eth_dev->data->hash_mac_addrs = rte_zmalloc("ngbe",
+ RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC, 0);
+ if (eth_dev->data->hash_mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %d bytes needed to store MAC addresses",
+ RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC);
+ rte_free(eth_dev->data->mac_addrs);
+ eth_dev->data->mac_addrs = NULL;
+ return -ENOMEM;
+ }
+
return 0;
}
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 20ab896f97..c8878b8563 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -30,4 +30,6 @@ ngbe_dev_hw(struct rte_eth_dev *dev)
return hw;
}
+#define NGBE_VMDQ_NUM_UC_MAC 4096 /* Maximum nb. of UC MAC addr. */
+
#endif /* _NGBE_ETHDEV_H_ */
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 10/19] net/ngbe: support link update
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (8 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 09/19] net/ngbe: store MAC address Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-07 13:50 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 11/19] net/ngbe: setup the check PHY link Jiawen Wu
` (9 subsequent siblings)
19 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Register to handle device interrupt.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/features/ngbe.ini | 3 +
doc/guides/nics/ngbe.rst | 6 +
drivers/net/ngbe/base/ngbe_dummy.h | 6 +
drivers/net/ngbe/base/ngbe_type.h | 11 +
drivers/net/ngbe/ngbe_ethdev.c | 369 ++++++++++++++++++++++++++++-
drivers/net/ngbe/ngbe_ethdev.h | 34 +++
6 files changed, 428 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
index 977286ac04..291a542a42 100644
--- a/doc/guides/nics/features/ngbe.ini
+++ b/doc/guides/nics/features/ngbe.ini
@@ -4,6 +4,9 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Speed capabilities = Y
+Link status = Y
+Link status event = Y
Multiprocess aware = Y
Linux = Y
ARMv8 = Y
diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst
index d661b6323d..fc2e52392b 100644
--- a/doc/guides/nics/ngbe.rst
+++ b/doc/guides/nics/ngbe.rst
@@ -8,6 +8,12 @@ The NGBE PMD (librte_pmd_ngbe) provides poll mode driver support
for Wangxun 1 Gigabit Ethernet NICs.
+Features
+--------
+
+- Link state information
+
+
Prerequisites
-------------
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index e5b5bbb5f7..634e9a69c1 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -64,6 +64,11 @@ static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
}
+static inline s32 ngbe_mac_check_link_dummy(struct ngbe_hw *TUP0, u32 *TUP1,
+ bool *TUP3, bool TUP4)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_set_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1,
u8 *TUP2, u32 TUP3, u32 TUP4)
{
@@ -135,6 +140,7 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy;
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
+ hw->mac.check_link = ngbe_mac_check_link_dummy;
hw->mac.set_rar = ngbe_mac_set_rar_dummy;
hw->mac.clear_rar = ngbe_mac_clear_rar_dummy;
hw->mac.set_vmdq = ngbe_mac_set_vmdq_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index dbf0654db3..554c57c845 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -97,6 +97,8 @@ struct ngbe_mac_info {
s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+ s32 (*check_link)(struct ngbe_hw *hw, u32 *speed,
+ bool *link_up, bool link_up_wait_to_complete);
/* RAR */
s32 (*set_rar)(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
@@ -117,6 +119,7 @@ struct ngbe_mac_info {
u32 num_rar_entries;
u32 max_tx_queues;
u32 max_rx_queues;
+ bool get_link_status;
struct ngbe_thermal_sensor_data thermal_sensor_data;
bool set_lben;
};
@@ -142,6 +145,14 @@ struct ngbe_phy_info {
bool reset_disable;
};
+enum ngbe_isb_idx {
+ NGBE_ISB_HEADER,
+ NGBE_ISB_MISC,
+ NGBE_ISB_VEC0,
+ NGBE_ISB_VEC1,
+ NGBE_ISB_MAX
+};
+
struct ngbe_hw {
void IOMEM *hw_addr;
void *back;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 77a5584fbd..1c6e4e2b3e 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -7,12 +7,17 @@
#include <rte_common.h>
#include <ethdev_pci.h>
+#include <rte_alarm.h>
+
#include "ngbe_logs.h"
#include "ngbe.h"
#include "ngbe_ethdev.h"
static int ngbe_dev_close(struct rte_eth_dev *dev);
+static void ngbe_dev_interrupt_handler(void *param);
+static void ngbe_dev_interrupt_delayed_handler(void *param);
+
/*
* The set of PCI devices this driver supports
*/
@@ -32,6 +37,28 @@ static const struct rte_pci_id pci_id_ngbe_map[] = {
{ .vendor_id = 0, /* sentinel */ },
};
+static const struct eth_dev_ops ngbe_eth_dev_ops;
+
+static inline void
+ngbe_enable_intr(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+
+ wr32(hw, NGBE_IENMISC, intr->mask_misc);
+ wr32(hw, NGBE_IMC(0), intr->mask & BIT_MASK32);
+ ngbe_flush(hw);
+}
+
+static void
+ngbe_disable_intr(struct ngbe_hw *hw)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ wr32(hw, NGBE_IMS(0), NGBE_IMS_MASK);
+ ngbe_flush(hw);
+}
+
/*
* Ensure that all locks are released before first NVM or PHY access
*/
@@ -60,11 +87,15 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
{
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
struct ngbe_hw *hw = ngbe_dev_hw(eth_dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
const struct rte_memzone *mz;
+ uint32_t ctrl_ext;
int err;
PMD_INIT_FUNC_TRACE();
+ eth_dev->dev_ops = &ngbe_eth_dev_ops;
+
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
@@ -115,6 +146,9 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -EIO;
}
+ /* disable interrupt */
+ ngbe_disable_intr(hw);
+
/* Allocate memory for storing MAC addresses */
eth_dev->data->mac_addrs = rte_zmalloc("ngbe", RTE_ETHER_ADDR_LEN *
hw->mac.num_rar_entries, 0);
@@ -141,6 +175,23 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -ENOMEM;
}
+ ctrl_ext = rd32(hw, NGBE_PORTCTL);
+ /* let hardware know driver is loaded */
+ ctrl_ext |= NGBE_PORTCTL_DRVLOAD;
+ /* Set PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext |= NGBE_PORTCTL_RSTDONE;
+ wr32(hw, NGBE_PORTCTL, ctrl_ext);
+ ngbe_flush(hw);
+
+ rte_intr_callback_register(intr_handle,
+ ngbe_dev_interrupt_handler, eth_dev);
+
+ /* enable uio/vfio intr/eventfd mapping */
+ rte_intr_enable(intr_handle);
+
+ /* enable support intr */
+ ngbe_enable_intr(eth_dev);
+
return 0;
}
@@ -180,11 +231,25 @@ static int eth_ngbe_pci_remove(struct rte_pci_device *pci_dev)
static struct rte_pci_driver rte_ngbe_pmd = {
.id_table = pci_id_ngbe_map,
- .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING |
+ RTE_PCI_DRV_INTR_LSC,
.probe = eth_ngbe_pci_probe,
.remove = eth_ngbe_pci_remove,
};
+static int
+ngbe_dev_configure(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* set flag to update link status after init */
+ intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+
+ return 0;
+}
+
/*
* Reset and stop device.
*/
@@ -198,6 +263,308 @@ ngbe_dev_close(struct rte_eth_dev *dev)
return -EINVAL;
}
+static int
+ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+{
+ RTE_SET_USED(dev);
+
+ dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_10M;
+
+ return 0;
+}
+
+/* return 0 means link status changed, -1 means not changed */
+int
+ngbe_dev_link_update_share(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_eth_link link;
+ u32 link_speed = NGBE_LINK_SPEED_UNKNOWN;
+ u32 lan_speed = 0;
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ bool link_up;
+ int err;
+ int wait = 1;
+
+ memset(&link, 0, sizeof(link));
+ link.link_status = ETH_LINK_DOWN;
+ link.link_speed = ETH_SPEED_NUM_NONE;
+ link.link_duplex = ETH_LINK_HALF_DUPLEX;
+ link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ ~ETH_LINK_SPEED_AUTONEG);
+
+ hw->mac.get_link_status = true;
+
+ if (intr->flags & NGBE_FLAG_NEED_LINK_CONFIG)
+ return rte_eth_linkstatus_set(dev, &link);
+
+ /* check if it needs to wait to complete, if lsc interrupt is enabled */
+ if (wait_to_complete == 0 || dev->data->dev_conf.intr_conf.lsc != 0)
+ wait = 0;
+
+ err = hw->mac.check_link(hw, &link_speed, &link_up, wait);
+ if (err != 0) {
+ link.link_speed = ETH_SPEED_NUM_NONE;
+ link.link_duplex = ETH_LINK_FULL_DUPLEX;
+ return rte_eth_linkstatus_set(dev, &link);
+ }
+
+ if (!link_up)
+ return rte_eth_linkstatus_set(dev, &link);
+
+ intr->flags &= ~NGBE_FLAG_NEED_LINK_CONFIG;
+ link.link_status = ETH_LINK_UP;
+ link.link_duplex = ETH_LINK_FULL_DUPLEX;
+
+ switch (link_speed) {
+ default:
+ case NGBE_LINK_SPEED_UNKNOWN:
+ link.link_speed = ETH_SPEED_NUM_NONE;
+ break;
+
+ case NGBE_LINK_SPEED_10M_FULL:
+ link.link_speed = ETH_SPEED_NUM_10M;
+ lan_speed = 0;
+ break;
+
+ case NGBE_LINK_SPEED_100M_FULL:
+ link.link_speed = ETH_SPEED_NUM_100M;
+ lan_speed = 1;
+ break;
+
+ case NGBE_LINK_SPEED_1GB_FULL:
+ link.link_speed = ETH_SPEED_NUM_1G;
+ lan_speed = 2;
+ break;
+ }
+
+ if (hw->is_pf) {
+ wr32m(hw, NGBE_LAN_SPEED, NGBE_LAN_SPEED_MASK, lan_speed);
+ if (link_speed & (NGBE_LINK_SPEED_1GB_FULL |
+ NGBE_LINK_SPEED_100M_FULL |
+ NGBE_LINK_SPEED_10M_FULL)) {
+ wr32m(hw, NGBE_MACTXCFG, NGBE_MACTXCFG_SPEED_MASK,
+ NGBE_MACTXCFG_SPEED_1G | NGBE_MACTXCFG_TE);
+ }
+ }
+
+ return rte_eth_linkstatus_set(dev, &link);
+}
+
+static int
+ngbe_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ return ngbe_dev_link_update_share(dev, wait_to_complete);
+}
+
+/*
+ * It reads ICR and sets flag for the link_update.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
+{
+ uint32_t eicr;
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ /* clear all cause mask */
+ ngbe_disable_intr(hw);
+
+ /* read-on-clear nic registers here */
+ eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC];
+ PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
+
+ intr->flags = 0;
+
+ /* set flag for async link update */
+ if (eicr & NGBE_ICRMISC_PHY)
+ intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+
+ if (eicr & NGBE_ICRMISC_VFMBX)
+ intr->flags |= NGBE_FLAG_MAILBOX;
+
+ if (eicr & NGBE_ICRMISC_LNKSEC)
+ intr->flags |= NGBE_FLAG_MACSEC;
+
+ if (eicr & NGBE_ICRMISC_GPIO)
+ intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+
+ return 0;
+}
+
+/**
+ * It gets and then prints the link status.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static void
+ngbe_dev_link_status_print(struct rte_eth_dev *dev)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_eth_link link;
+
+ rte_eth_linkstatus_get(dev, &link);
+
+ if (link.link_status == ETH_LINK_UP) {
+ PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
+ (int)(dev->data->port_id),
+ (unsigned int)link.link_speed,
+ link.link_duplex == ETH_LINK_FULL_DUPLEX ?
+ "full-duplex" : "half-duplex");
+ } else {
+ PMD_INIT_LOG(INFO, " Port %d: Link Down",
+ (int)(dev->data->port_id));
+ }
+ PMD_INIT_LOG(DEBUG, "PCI Address: " PCI_PRI_FMT,
+ pci_dev->addr.domain,
+ pci_dev->addr.bus,
+ pci_dev->addr.devid,
+ pci_dev->addr.function);
+}
+
+/*
+ * It executes link_update after knowing an interrupt occurred.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_interrupt_action(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ int64_t timeout;
+
+ PMD_DRV_LOG(DEBUG, "intr action type %d", intr->flags);
+
+ if (intr->flags & NGBE_FLAG_NEED_LINK_UPDATE) {
+ struct rte_eth_link link;
+
+ /*get the link status before link update, for predicting later*/
+ rte_eth_linkstatus_get(dev, &link);
+
+ ngbe_dev_link_update(dev, 0);
+
+ /* likely to up */
+ if (link.link_status != ETH_LINK_UP)
+ /* handle it 1 sec later, wait it being stable */
+ timeout = NGBE_LINK_UP_CHECK_TIMEOUT;
+ /* likely to down */
+ else
+ /* handle it 4 sec later, wait it being stable */
+ timeout = NGBE_LINK_DOWN_CHECK_TIMEOUT;
+
+ ngbe_dev_link_status_print(dev);
+ if (rte_eal_alarm_set(timeout * 1000,
+ ngbe_dev_interrupt_delayed_handler,
+ (void *)dev) < 0) {
+ PMD_DRV_LOG(ERR, "Error setting alarm");
+ } else {
+ /* remember original mask */
+ intr->mask_misc_orig = intr->mask_misc;
+ /* only disable lsc interrupt */
+ intr->mask_misc &= ~NGBE_ICRMISC_PHY;
+
+ intr->mask_orig = intr->mask;
+ /* only disable all misc interrupts */
+ intr->mask &= ~(1ULL << NGBE_MISC_VEC_ID);
+ }
+ }
+
+ PMD_DRV_LOG(DEBUG, "enable intr immediately");
+ ngbe_enable_intr(dev);
+
+ return 0;
+}
+
+/**
+ * Interrupt handler which shall be registered for alarm callback for delayed
+ * handling specific interrupt to wait for the stable nic state. As the
+ * NIC interrupt state is not stable for ngbe after link is just down,
+ * it needs to wait 4 seconds to get the stable status.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) registered before.
+ */
+static void
+ngbe_dev_interrupt_delayed_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ uint32_t eicr;
+
+ ngbe_disable_intr(hw);
+
+ eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC];
+
+ if (intr->flags & NGBE_FLAG_NEED_LINK_UPDATE) {
+ ngbe_dev_link_update(dev, 0);
+ intr->flags &= ~NGBE_FLAG_NEED_LINK_UPDATE;
+ ngbe_dev_link_status_print(dev);
+ rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
+ NULL);
+ }
+
+ if (intr->flags & NGBE_FLAG_MACSEC) {
+ rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_MACSEC,
+ NULL);
+ intr->flags &= ~NGBE_FLAG_MACSEC;
+ }
+
+ /* restore original mask */
+ intr->mask_misc = intr->mask_misc_orig;
+ intr->mask_misc_orig = 0;
+ intr->mask = intr->mask_orig;
+ intr->mask_orig = 0;
+
+ PMD_DRV_LOG(DEBUG, "enable intr in delayed handler S[%08x]", eicr);
+ ngbe_enable_intr(dev);
+}
+
+/**
+ * Interrupt handler triggered by NIC for handling
+ * specific interrupt.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) registered before.
+ */
+static void
+ngbe_dev_interrupt_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+
+ ngbe_dev_interrupt_get_status(dev);
+ ngbe_dev_interrupt_action(dev);
+}
+
+static const struct eth_dev_ops ngbe_eth_dev_ops = {
+ .dev_configure = ngbe_dev_configure,
+ .dev_infos_get = ngbe_dev_info_get,
+ .link_update = ngbe_dev_link_update,
+};
+
RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index c8878b8563..f076ff9f69 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -6,11 +6,30 @@
#ifndef _NGBE_ETHDEV_H_
#define _NGBE_ETHDEV_H_
+/* need update link, bit flag */
+#define NGBE_FLAG_NEED_LINK_UPDATE (uint32_t)(1 << 0)
+#define NGBE_FLAG_MAILBOX (uint32_t)(1 << 1)
+#define NGBE_FLAG_PHY_INTERRUPT (uint32_t)(1 << 2)
+#define NGBE_FLAG_MACSEC (uint32_t)(1 << 3)
+#define NGBE_FLAG_NEED_LINK_CONFIG (uint32_t)(1 << 4)
+
+#define NGBE_MISC_VEC_ID RTE_INTR_VEC_ZERO_OFFSET
+
+/* structure for interrupt relative data */
+struct ngbe_interrupt {
+ uint32_t flags;
+ uint32_t mask_misc;
+ uint32_t mask_misc_orig; /* save mask during delayed handler */
+ uint64_t mask;
+ uint64_t mask_orig; /* save mask during delayed handler */
+};
+
/*
* Structure to store private data for each driver instance (for each port).
*/
struct ngbe_adapter {
struct ngbe_hw hw;
+ struct ngbe_interrupt intr;
};
static inline struct ngbe_adapter *
@@ -30,6 +49,21 @@ ngbe_dev_hw(struct rte_eth_dev *dev)
return hw;
}
+static inline struct ngbe_interrupt *
+ngbe_dev_intr(struct rte_eth_dev *dev)
+{
+ struct ngbe_adapter *ad = ngbe_dev_adapter(dev);
+ struct ngbe_interrupt *intr = &ad->intr;
+
+ return intr;
+}
+
+int
+ngbe_dev_link_update_share(struct rte_eth_dev *dev,
+ int wait_to_complete);
+
+#define NGBE_LINK_DOWN_CHECK_TIMEOUT 4000 /* ms */
+#define NGBE_LINK_UP_CHECK_TIMEOUT 1000 /* ms */
#define NGBE_VMDQ_NUM_UC_MAC 4096 /* Maximum nb. of UC MAC addr. */
#endif /* _NGBE_ETHDEV_H_ */
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 11/19] net/ngbe: setup the check PHY link
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (9 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 10/19] net/ngbe: support link update Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
` (8 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Setup PHY, determine link and speed status from PHY.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_dummy.h | 18 +++
drivers/net/ngbe/base/ngbe_hw.c | 53 +++++++++
drivers/net/ngbe/base/ngbe_hw.h | 6 +
drivers/net/ngbe/base/ngbe_phy.c | 22 ++++
drivers/net/ngbe/base/ngbe_phy.h | 2 +
drivers/net/ngbe/base/ngbe_phy_mvl.c | 98 ++++++++++++++++
drivers/net/ngbe/base/ngbe_phy_mvl.h | 4 +
drivers/net/ngbe/base/ngbe_phy_rtl.c | 166 +++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_phy_rtl.h | 4 +
drivers/net/ngbe/base/ngbe_phy_yt.c | 134 +++++++++++++++++++++
drivers/net/ngbe/base/ngbe_phy_yt.h | 8 ++
drivers/net/ngbe/base/ngbe_type.h | 11 ++
12 files changed, 526 insertions(+)
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 634e9a69c1..1b74710b09 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -64,6 +64,11 @@ static inline void ngbe_mac_release_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
}
+static inline s32 ngbe_mac_setup_link_dummy(struct ngbe_hw *TUP0, u32 TUP1,
+ bool TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_check_link_dummy(struct ngbe_hw *TUP0, u32 *TUP1,
bool *TUP3, bool TUP4)
{
@@ -129,6 +134,16 @@ static inline s32 ngbe_phy_write_reg_unlocked_dummy(struct ngbe_hw *TUP0,
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_phy_setup_link_dummy(struct ngbe_hw *TUP0,
+ u32 TUP1, bool TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_phy_check_link_dummy(struct ngbe_hw *TUP0, u32 *TUP1,
+ bool *TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
{
hw->bus.set_lan_id = ngbe_bus_set_lan_id_dummy;
@@ -140,6 +155,7 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy;
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
+ hw->mac.setup_link = ngbe_mac_setup_link_dummy;
hw->mac.check_link = ngbe_mac_check_link_dummy;
hw->mac.set_rar = ngbe_mac_set_rar_dummy;
hw->mac.clear_rar = ngbe_mac_clear_rar_dummy;
@@ -154,6 +170,8 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->phy.write_reg = ngbe_phy_write_reg_dummy;
hw->phy.read_reg_unlocked = ngbe_phy_read_reg_unlocked_dummy;
hw->phy.write_reg_unlocked = ngbe_phy_write_reg_unlocked_dummy;
+ hw->phy.setup_link = ngbe_phy_setup_link_dummy;
+ hw->phy.check_link = ngbe_phy_check_link_dummy;
}
#endif /* _NGBE_TYPE_DUMMY_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 2daddaaf05..3683475970 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -599,6 +599,54 @@ s32 ngbe_init_uta_tables(struct ngbe_hw *hw)
return 0;
}
+/**
+ * ngbe_check_mac_link_em - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ngbe_check_mac_link_em(struct ngbe_hw *hw, u32 *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ u32 i, reg;
+ s32 status = 0;
+
+ DEBUGFUNC("ngbe_check_mac_link_em");
+
+ reg = rd32(hw, NGBE_GPIOINTSTAT);
+ wr32(hw, NGBE_GPIOEOI, reg);
+
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < hw->mac.max_link_up_time; i++) {
+ status = hw->phy.check_link(hw, speed, link_up);
+ if (*link_up)
+ break;
+ msec_delay(100);
+ }
+ } else {
+ status = hw->phy.check_link(hw, speed, link_up);
+ }
+
+ return status;
+}
+
+s32 ngbe_setup_mac_link_em(struct ngbe_hw *hw,
+ u32 speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ DEBUGFUNC("\n");
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.setup_link(hw, speed, autoneg_wait_to_complete);
+
+ return status;
+}
+
/**
* ngbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
* @hw: pointer to hardware structure
@@ -806,6 +854,10 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
mac->set_vmdq = ngbe_set_vmdq;
mac->clear_vmdq = ngbe_clear_vmdq;
+ /* Link */
+ mac->check_link = ngbe_check_mac_link_em;
+ mac->setup_link = ngbe_setup_mac_link_em;
+
/* Manageability interface */
mac->init_thermal_sensor_thresh = ngbe_init_thermal_sensor_thresh;
mac->check_overtemp = ngbe_mac_check_overtemp;
@@ -853,6 +905,7 @@ s32 ngbe_init_shared_code(struct ngbe_hw *hw)
status = NGBE_ERR_DEVICE_NOT_SUPPORTED;
break;
}
+ hw->mac.max_link_up_time = NGBE_LINK_UP_TIME;
hw->bus.set_lan_id(hw);
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 875bfa1add..9b71e4b0dd 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -20,6 +20,12 @@ s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr);
void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
+s32 ngbe_check_mac_link_em(struct ngbe_hw *hw, u32 *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ngbe_setup_mac_link_em(struct ngbe_hw *hw,
+ u32 speed,
+ bool autoneg_wait_to_complete);
+
s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index);
diff --git a/drivers/net/ngbe/base/ngbe_phy.c b/drivers/net/ngbe/base/ngbe_phy.c
index 61bb953b6a..f0265d83b8 100644
--- a/drivers/net/ngbe/base/ngbe_phy.c
+++ b/drivers/net/ngbe/base/ngbe_phy.c
@@ -420,7 +420,29 @@ s32 ngbe_init_phy(struct ngbe_hw *hw)
/* Identify the PHY */
err = phy->identify(hw);
+ if (err == NGBE_ERR_PHY_ADDR_INVALID)
+ goto init_phy_ops_out;
+ /* Set necessary function pointers based on PHY type */
+ switch (hw->phy.type) {
+ case ngbe_phy_rtl:
+ hw->phy.check_link = ngbe_check_phy_link_rtl;
+ hw->phy.setup_link = ngbe_setup_phy_link_rtl;
+ break;
+ case ngbe_phy_mvl:
+ case ngbe_phy_mvl_sfi:
+ hw->phy.check_link = ngbe_check_phy_link_mvl;
+ hw->phy.setup_link = ngbe_setup_phy_link_mvl;
+ break;
+ case ngbe_phy_yt8521s:
+ case ngbe_phy_yt8521s_sfi:
+ hw->phy.check_link = ngbe_check_phy_link_yt;
+ hw->phy.setup_link = ngbe_setup_phy_link_yt;
+ default:
+ break;
+ }
+
+init_phy_ops_out:
return err;
}
diff --git a/drivers/net/ngbe/base/ngbe_phy.h b/drivers/net/ngbe/base/ngbe_phy.h
index 226e0189ec..5d6ff1711c 100644
--- a/drivers/net/ngbe/base/ngbe_phy.h
+++ b/drivers/net/ngbe/base/ngbe_phy.h
@@ -22,6 +22,8 @@
#define NGBE_MD_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/
#define NGBE_PHY_REVISION_MASK 0xFFFFFFF0
+#define NGBE_MII_AUTONEG_REG 0x0
+
/* IEEE 802.3 Clause 22 */
struct mdi_reg_22 {
u16 page;
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.c b/drivers/net/ngbe/base/ngbe_phy_mvl.c
index 1248478252..f8cb6cd38a 100644
--- a/drivers/net/ngbe/base/ngbe_phy_mvl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.c
@@ -48,6 +48,64 @@ s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw,
return 0;
}
+s32 ngbe_setup_phy_link_mvl(struct ngbe_hw *hw, u32 speed,
+ bool autoneg_wait_to_complete)
+{
+ u16 value_r4 = 0;
+ u16 value_r9 = 0;
+ u16 value;
+
+ DEBUGFUNC("ngbe_setup_phy_link_mvl");
+ UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+
+ hw->phy.autoneg_advertised = 0;
+
+ if (hw->phy.type == ngbe_phy_mvl) {
+ if (speed & NGBE_LINK_SPEED_1GB_FULL) {
+ value_r9 |= MVL_PHY_1000BASET_FULL;
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+ }
+
+ if (speed & NGBE_LINK_SPEED_100M_FULL) {
+ value_r4 |= MVL_PHY_100BASET_FULL;
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_100M_FULL;
+ }
+
+ if (speed & NGBE_LINK_SPEED_10M_FULL) {
+ value_r4 |= MVL_PHY_10BASET_FULL;
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_10M_FULL;
+ }
+
+ hw->phy.read_reg(hw, MVL_ANA, 0, &value);
+ value &= ~(MVL_PHY_100BASET_FULL |
+ MVL_PHY_100BASET_HALF |
+ MVL_PHY_10BASET_FULL |
+ MVL_PHY_10BASET_HALF);
+ value_r4 |= value;
+ hw->phy.write_reg(hw, MVL_ANA, 0, value_r4);
+
+ hw->phy.read_reg(hw, MVL_PHY_1000BASET, 0, &value);
+ value &= ~(MVL_PHY_1000BASET_FULL |
+ MVL_PHY_1000BASET_HALF);
+ value_r9 |= value;
+ hw->phy.write_reg(hw, MVL_PHY_1000BASET, 0, value_r9);
+ } else {
+ hw->phy.autoneg_advertised = 1;
+
+ hw->phy.read_reg(hw, MVL_ANA, 0, &value);
+ value &= ~(MVL_PHY_1000BASEX_HALF | MVL_PHY_1000BASEX_FULL);
+ value |= MVL_PHY_1000BASEX_FULL;
+ hw->phy.write_reg(hw, MVL_ANA, 0, value);
+ }
+
+ value = MVL_CTRL_RESTART_AN | MVL_CTRL_ANE;
+ ngbe_write_phy_reg_mdi(hw, MVL_CTRL, 0, value);
+
+ hw->phy.read_reg(hw, MVL_INTR, 0, &value);
+
+ return 0;
+}
+
s32 ngbe_reset_phy_mvl(struct ngbe_hw *hw)
{
u32 i;
@@ -87,3 +145,43 @@ s32 ngbe_reset_phy_mvl(struct ngbe_hw *hw)
return status;
}
+s32 ngbe_check_phy_link_mvl(struct ngbe_hw *hw,
+ u32 *speed, bool *link_up)
+{
+ s32 status = 0;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+ u16 insr = 0;
+
+ DEBUGFUNC("ngbe_check_phy_link_mvl");
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = NGBE_LINK_SPEED_UNKNOWN;
+
+ hw->phy.read_reg(hw, MVL_INTR, 0, &insr);
+
+ /*
+ * Check current speed and link status of the PHY register.
+ * This is a vendor specific register and may have to
+ * be changed for other copper PHYs.
+ */
+ status = hw->phy.read_reg(hw, MVL_PHYSR, 0, &phy_data);
+ phy_link = phy_data & MVL_PHYSR_LINK;
+ phy_speed = phy_data & MVL_PHYSR_SPEED_MASK;
+
+ if (phy_link == MVL_PHYSR_LINK) {
+ *link_up = true;
+
+ if (phy_speed == MVL_PHYSR_SPEED_1000M)
+ *speed = NGBE_LINK_SPEED_1GB_FULL;
+ else if (phy_speed == MVL_PHYSR_SPEED_100M)
+ *speed = NGBE_LINK_SPEED_100M_FULL;
+ else if (phy_speed == MVL_PHYSR_SPEED_10M)
+ *speed = NGBE_LINK_SPEED_10M_FULL;
+ }
+
+ return status;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.h b/drivers/net/ngbe/base/ngbe_phy_mvl.h
index ca39f3cd58..c8155c39a0 100644
--- a/drivers/net/ngbe/base/ngbe_phy_mvl.h
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.h
@@ -89,4 +89,8 @@ s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
s32 ngbe_reset_phy_mvl(struct ngbe_hw *hw);
+s32 ngbe_check_phy_link_mvl(struct ngbe_hw *hw,
+ u32 *speed, bool *link_up);
+s32 ngbe_setup_phy_link_mvl(struct ngbe_hw *hw,
+ u32 speed, bool autoneg_wait_to_complete);
#endif /* _NGBE_PHY_MVL_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.c b/drivers/net/ngbe/base/ngbe_phy_rtl.c
index 400fbe8c1f..a45b0f0a55 100644
--- a/drivers/net/ngbe/base/ngbe_phy_rtl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.c
@@ -38,6 +38,134 @@ s32 ngbe_write_phy_reg_rtl(struct ngbe_hw *hw,
return 0;
}
+/**
+ * ngbe_setup_phy_link_rtl - Set and restart auto-neg
+ * @hw: pointer to hardware structure
+ *
+ * Restart auto-negotiation and PHY and waits for completion.
+ **/
+s32 ngbe_setup_phy_link_rtl(struct ngbe_hw *hw,
+ u32 speed, bool autoneg_wait_to_complete)
+{
+ u16 autoneg_reg = NGBE_MII_AUTONEG_REG;
+ u16 value = 0;
+
+ DEBUGFUNC("ngbe_setup_phy_link_rtl");
+
+ UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+
+ hw->phy.read_reg(hw, RTL_INSR, 0xa43, &autoneg_reg);
+
+ if (!hw->mac.autoneg) {
+ hw->phy.reset_hw(hw);
+
+ switch (speed) {
+ case NGBE_LINK_SPEED_1GB_FULL:
+ value = RTL_BMCR_SPEED_SELECT1;
+ break;
+ case NGBE_LINK_SPEED_100M_FULL:
+ value = RTL_BMCR_SPEED_SELECT0;
+ break;
+ case NGBE_LINK_SPEED_10M_FULL:
+ value = 0;
+ break;
+ default:
+ value = RTL_BMCR_SPEED_SELECT1 | RTL_BMCR_SPEED_SELECT0;
+ DEBUGOUT("unknown speed = 0x%x.\n", speed);
+ break;
+ }
+ /* duplex full */
+ value |= RTL_BMCR_DUPLEX;
+ hw->phy.write_reg(hw, RTL_BMCR, RTL_DEV_ZERO, value);
+
+ goto skip_an;
+ }
+
+ /*
+ * Clear autoneg_advertised and set new values based on input link
+ * speed.
+ */
+ if (speed) {
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & NGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+
+ if (speed & NGBE_LINK_SPEED_100M_FULL)
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_100M_FULL;
+
+ if (speed & NGBE_LINK_SPEED_10M_FULL)
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_10M_FULL;
+ }
+
+ /* disable 10/100M Half Duplex */
+ hw->phy.read_reg(hw, RTL_ANAR, RTL_DEV_ZERO, &autoneg_reg);
+ autoneg_reg &= 0xFF5F;
+ hw->phy.write_reg(hw, RTL_ANAR, RTL_DEV_ZERO, autoneg_reg);
+
+ /* set advertise enable according to input speed */
+ if (!(speed & NGBE_LINK_SPEED_1GB_FULL)) {
+ hw->phy.read_reg(hw, RTL_GBCR,
+ RTL_DEV_ZERO, &autoneg_reg);
+ autoneg_reg &= ~RTL_GBCR_1000F;
+ hw->phy.write_reg(hw, RTL_GBCR,
+ RTL_DEV_ZERO, autoneg_reg);
+ } else {
+ hw->phy.read_reg(hw, RTL_GBCR,
+ RTL_DEV_ZERO, &autoneg_reg);
+ autoneg_reg |= RTL_GBCR_1000F;
+ hw->phy.write_reg(hw, RTL_GBCR,
+ RTL_DEV_ZERO, autoneg_reg);
+ }
+
+ if (!(speed & NGBE_LINK_SPEED_100M_FULL)) {
+ hw->phy.read_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, &autoneg_reg);
+ autoneg_reg &= ~RTL_ANAR_100F;
+ autoneg_reg &= ~RTL_ANAR_100H;
+ hw->phy.write_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, autoneg_reg);
+ } else {
+ hw->phy.read_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, &autoneg_reg);
+ autoneg_reg |= RTL_ANAR_100F;
+ hw->phy.write_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, autoneg_reg);
+ }
+
+ if (!(speed & NGBE_LINK_SPEED_10M_FULL)) {
+ hw->phy.read_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, &autoneg_reg);
+ autoneg_reg &= ~RTL_ANAR_10F;
+ autoneg_reg &= ~RTL_ANAR_10H;
+ hw->phy.write_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, autoneg_reg);
+ } else {
+ hw->phy.read_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, &autoneg_reg);
+ autoneg_reg |= RTL_ANAR_10F;
+ hw->phy.write_reg(hw, RTL_ANAR,
+ RTL_DEV_ZERO, autoneg_reg);
+ }
+
+ /* restart AN and wait AN done interrupt */
+ autoneg_reg = RTL_BMCR_RESTART_AN | RTL_BMCR_ANE;
+ hw->phy.write_reg(hw, RTL_BMCR, RTL_DEV_ZERO, autoneg_reg);
+
+skip_an:
+ autoneg_reg = 0x205B;
+ hw->phy.write_reg(hw, RTL_LCR, 0xd04, autoneg_reg);
+ hw->phy.write_reg(hw, RTL_EEELCR, 0xd04, 0);
+
+ hw->phy.read_reg(hw, RTL_LPCR, 0xd04, &autoneg_reg);
+ autoneg_reg = autoneg_reg & 0xFFFC;
+ /* act led blinking mode set to 60ms */
+ autoneg_reg |= 0x2;
+ hw->phy.write_reg(hw, RTL_LPCR, 0xd04, autoneg_reg);
+
+ return 0;
+}
+
s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw)
{
u16 value = 0, i;
@@ -63,3 +191,41 @@ s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw)
return status;
}
+s32 ngbe_check_phy_link_rtl(struct ngbe_hw *hw, u32 *speed, bool *link_up)
+{
+ s32 status = 0;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+ u16 insr = 0;
+
+ DEBUGFUNC("ngbe_check_phy_link_rtl");
+
+ hw->phy.read_reg(hw, RTL_INSR, 0xa43, &insr);
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = NGBE_LINK_SPEED_UNKNOWN;
+
+ /*
+ * Check current speed and link status of the PHY register.
+ * This is a vendor specific register and may have to
+ * be changed for other copper PHYs.
+ */
+ status = hw->phy.read_reg(hw, RTL_PHYSR, 0xa43, &phy_data);
+ phy_link = phy_data & RTL_PHYSR_RTLS;
+ phy_speed = phy_data & (RTL_PHYSR_SPEED_MASK | RTL_PHYSR_DP);
+ if (phy_link == RTL_PHYSR_RTLS) {
+ *link_up = true;
+
+ if (phy_speed == (RTL_PHYSR_SPEED_1000M | RTL_PHYSR_DP))
+ *speed = NGBE_LINK_SPEED_1GB_FULL;
+ else if (phy_speed == (RTL_PHYSR_SPEED_100M | RTL_PHYSR_DP))
+ *speed = NGBE_LINK_SPEED_100M_FULL;
+ else if (phy_speed == (RTL_PHYSR_SPEED_10M | RTL_PHYSR_DP))
+ *speed = NGBE_LINK_SPEED_10M_FULL;
+ }
+
+ return status;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.h b/drivers/net/ngbe/base/ngbe_phy_rtl.h
index 2da5c7b626..ee5e03e9f3 100644
--- a/drivers/net/ngbe/base/ngbe_phy_rtl.h
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.h
@@ -78,6 +78,10 @@ s32 ngbe_read_phy_reg_rtl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
s32 ngbe_write_phy_reg_rtl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
u16 phy_data);
+s32 ngbe_setup_phy_link_rtl(struct ngbe_hw *hw,
+ u32 speed, bool autoneg_wait_to_complete);
s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw);
+s32 ngbe_check_phy_link_rtl(struct ngbe_hw *hw,
+ u32 *speed, bool *link_up);
#endif /* _NGBE_PHY_RTL_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.c b/drivers/net/ngbe/base/ngbe_phy_yt.c
index a5b032240c..4a44414c64 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.c
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.c
@@ -78,6 +78,104 @@ s32 ngbe_write_phy_reg_ext_yt(struct ngbe_hw *hw,
return 0;
}
+s32 ngbe_read_phy_reg_sds_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 *phy_data)
+{
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, device_type, YT_SMI_PHY_SDS);
+ ngbe_read_phy_reg_ext_yt(hw, reg_addr, device_type, phy_data);
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, device_type, 0);
+
+ return 0;
+}
+
+s32 ngbe_write_phy_reg_sds_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 phy_data)
+{
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, device_type, YT_SMI_PHY_SDS);
+ ngbe_write_phy_reg_ext_yt(hw, reg_addr, device_type, phy_data);
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, device_type, 0);
+
+ return 0;
+}
+
+s32 ngbe_setup_phy_link_yt(struct ngbe_hw *hw, u32 speed,
+ bool autoneg_wait_to_complete)
+{
+ u16 value_r4 = 0;
+ u16 value_r9 = 0;
+ u16 value;
+
+ DEBUGFUNC("ngbe_setup_phy_link_yt");
+ UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+
+ hw->phy.autoneg_advertised = 0;
+
+ if (hw->phy.type == ngbe_phy_yt8521s) {
+ /*disable 100/10base-T Self-negotiation ability*/
+ hw->phy.read_reg(hw, YT_ANA, 0, &value);
+ value &= ~(YT_ANA_100BASET_FULL | YT_ANA_10BASET_FULL);
+ hw->phy.write_reg(hw, YT_ANA, 0, value);
+
+ /*disable 1000base-T Self-negotiation ability*/
+ hw->phy.read_reg(hw, YT_MS_CTRL, 0, &value);
+ value &= ~YT_MS_1000BASET_FULL;
+ hw->phy.write_reg(hw, YT_MS_CTRL, 0, value);
+
+ if (speed & NGBE_LINK_SPEED_1GB_FULL) {
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+ value_r9 |= YT_MS_1000BASET_FULL;
+ }
+ if (speed & NGBE_LINK_SPEED_100M_FULL) {
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_100M_FULL;
+ value_r4 |= YT_ANA_100BASET_FULL;
+ }
+ if (speed & NGBE_LINK_SPEED_10M_FULL) {
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_10M_FULL;
+ value_r4 |= YT_ANA_10BASET_FULL;
+ }
+
+ /* enable 1000base-T Self-negotiation ability */
+ hw->phy.read_reg(hw, YT_MS_CTRL, 0, &value);
+ value |= value_r9;
+ hw->phy.write_reg(hw, YT_MS_CTRL, 0, value);
+
+ /* enable 100/10base-T Self-negotiation ability */
+ hw->phy.read_reg(hw, YT_ANA, 0, &value);
+ value |= value_r4;
+ hw->phy.write_reg(hw, YT_ANA, 0, value);
+
+ /* software reset to make the above configuration take effect*/
+ hw->phy.read_reg(hw, YT_BCR, 0, &value);
+ value |= YT_BCR_RESET;
+ hw->phy.write_reg(hw, YT_BCR, 0, value);
+ } else {
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+
+ /* RGMII_Config1 : Config rx and tx training delay */
+ value = YT_RGMII_CONF1_RXDELAY |
+ YT_RGMII_CONF1_TXDELAY_FE |
+ YT_RGMII_CONF1_TXDELAY;
+ ngbe_write_phy_reg_ext_yt(hw, YT_RGMII_CONF1, 0, value);
+ value = YT_CHIP_MODE_SEL(1) |
+ YT_CHIP_SW_LDO_EN |
+ YT_CHIP_SW_RST;
+ ngbe_write_phy_reg_ext_yt(hw, YT_CHIP, 0, value);
+
+ /* software reset */
+ ngbe_write_phy_reg_sds_ext_yt(hw, 0x0, 0, 0x9140);
+
+ /* power on phy */
+ hw->phy.read_reg(hw, YT_BCR, 0, &value);
+ value &= ~YT_BCR_PWDN;
+ hw->phy.write_reg(hw, YT_BCR, 0, value);
+ }
+
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, 0, 0);
+ ngbe_read_phy_reg_mdi(hw, YT_INTR_STATUS, 0, &value);
+
+ return 0;
+}
+
s32 ngbe_reset_phy_yt(struct ngbe_hw *hw)
{
u32 i;
@@ -110,3 +208,39 @@ s32 ngbe_reset_phy_yt(struct ngbe_hw *hw)
return status;
}
+s32 ngbe_check_phy_link_yt(struct ngbe_hw *hw,
+ u32 *speed, bool *link_up)
+{
+ s32 status = 0;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+ u16 insr = 0;
+
+ DEBUGFUNC("ngbe_check_phy_link_yt");
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = NGBE_LINK_SPEED_UNKNOWN;
+
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, 0, 0);
+ ngbe_read_phy_reg_mdi(hw, YT_INTR_STATUS, 0, &insr);
+
+ status = hw->phy.read_reg(hw, YT_SPST, 0, &phy_data);
+ phy_link = phy_data & YT_SPST_LINK;
+ phy_speed = phy_data & YT_SPST_SPEED_MASK;
+
+ if (phy_link) {
+ *link_up = true;
+
+ if (phy_speed == YT_SPST_SPEED_1000M)
+ *speed = NGBE_LINK_SPEED_1GB_FULL;
+ else if (phy_speed == YT_SPST_SPEED_100M)
+ *speed = NGBE_LINK_SPEED_100M_FULL;
+ else if (phy_speed == YT_SPST_SPEED_10M)
+ *speed = NGBE_LINK_SPEED_10M_FULL;
+ }
+
+ return status;
+}
+
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.h b/drivers/net/ngbe/base/ngbe_phy_yt.h
index 6d49464d6d..f7a0cb873c 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.h
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.h
@@ -61,7 +61,15 @@ s32 ngbe_read_phy_reg_ext_yt(struct ngbe_hw *hw,
u32 reg_addr, u32 device_type, u16 *phy_data);
s32 ngbe_write_phy_reg_ext_yt(struct ngbe_hw *hw,
u32 reg_addr, u32 device_type, u16 phy_data);
+s32 ngbe_read_phy_reg_sds_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 *phy_data);
+s32 ngbe_write_phy_reg_sds_ext_yt(struct ngbe_hw *hw,
+ u32 reg_addr, u32 device_type, u16 phy_data);
s32 ngbe_reset_phy_yt(struct ngbe_hw *hw);
+s32 ngbe_check_phy_link_yt(struct ngbe_hw *hw,
+ u32 *speed, bool *link_up);
+s32 ngbe_setup_phy_link_yt(struct ngbe_hw *hw,
+ u32 speed, bool autoneg_wait_to_complete);
#endif /* _NGBE_PHY_YT_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 554c57c845..472c0c1bea 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -6,6 +6,8 @@
#ifndef _NGBE_TYPE_H_
#define _NGBE_TYPE_H_
+#define NGBE_LINK_UP_TIME 90 /* 9.0 Seconds */
+
#define NGBE_FRAME_SIZE_DFT (1522) /* Default frame size, +FCS */
#define NGBE_ALIGN 128 /* as intel did */
@@ -97,6 +99,8 @@ struct ngbe_mac_info {
s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+ s32 (*setup_link)(struct ngbe_hw *hw, u32 speed,
+ bool autoneg_wait_to_complete);
s32 (*check_link)(struct ngbe_hw *hw, u32 *speed,
bool *link_up, bool link_up_wait_to_complete);
/* RAR */
@@ -122,6 +126,9 @@ struct ngbe_mac_info {
bool get_link_status;
struct ngbe_thermal_sensor_data thermal_sensor_data;
bool set_lben;
+ u32 max_link_up_time;
+
+ bool autoneg;
};
struct ngbe_phy_info {
@@ -135,6 +142,9 @@ struct ngbe_phy_info {
u32 device_type, u16 *phy_data);
s32 (*write_reg_unlocked)(struct ngbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data);
+ s32 (*setup_link)(struct ngbe_hw *hw, u32 speed,
+ bool autoneg_wait_to_complete);
+ s32 (*check_link)(struct ngbe_hw *hw, u32 *speed, bool *link_up);
enum ngbe_media_type media_type;
enum ngbe_phy_type type;
@@ -143,6 +153,7 @@ struct ngbe_phy_info {
u32 revision;
u32 phy_semaphore_mask;
bool reset_disable;
+ u32 autoneg_advertised;
};
enum ngbe_isb_idx {
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 12/19] net/ngbe: add Rx queue setup and release
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (10 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 11/19] net/ngbe: setup the check PHY link Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-07 13:56 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 13/19] net/ngbe: add Tx " Jiawen Wu
` (7 subsequent siblings)
19 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Setup device Rx queue and release Rx queue.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/meson.build | 1 +
drivers/net/ngbe/ngbe_ethdev.c | 37 ++++-
drivers/net/ngbe/ngbe_ethdev.h | 16 ++
drivers/net/ngbe/ngbe_rxtx.c | 290 +++++++++++++++++++++++++++++++++
drivers/net/ngbe/ngbe_rxtx.h | 96 +++++++++++
5 files changed, 439 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ngbe/ngbe_rxtx.c
create mode 100644 drivers/net/ngbe/ngbe_rxtx.h
diff --git a/drivers/net/ngbe/meson.build b/drivers/net/ngbe/meson.build
index 85349e597c..60f535132f 100644
--- a/drivers/net/ngbe/meson.build
+++ b/drivers/net/ngbe/meson.build
@@ -12,6 +12,7 @@ objs = [base_objs]
sources = files(
'ngbe_ethdev.c',
+ 'ngbe_rxtx.c',
)
includes += include_directories('base')
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 1c6e4e2b3e..9852452154 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -12,6 +12,7 @@
#include "ngbe_logs.h"
#include "ngbe.h"
#include "ngbe_ethdev.h"
+#include "ngbe_rxtx.h"
static int ngbe_dev_close(struct rte_eth_dev *dev);
@@ -37,6 +38,12 @@ static const struct rte_pci_id pci_id_ngbe_map[] = {
{ .vendor_id = 0, /* sentinel */ },
};
+static const struct rte_eth_desc_lim rx_desc_lim = {
+ .nb_max = NGBE_RING_DESC_MAX,
+ .nb_min = NGBE_RING_DESC_MIN,
+ .nb_align = NGBE_RXD_ALIGN,
+};
+
static const struct eth_dev_ops ngbe_eth_dev_ops;
static inline void
@@ -241,12 +248,19 @@ static int
ngbe_dev_configure(struct rte_eth_dev *dev)
{
struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ struct ngbe_adapter *adapter = ngbe_dev_adapter(dev);
PMD_INIT_FUNC_TRACE();
/* set flag to update link status after init */
intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+ /*
+ * Initialize to TRUE. If any of Rx queues doesn't meet the bulk
+ * allocation Rx preconditions we will reset it.
+ */
+ adapter->rx_bulk_alloc_allowed = true;
+
return 0;
}
@@ -266,11 +280,30 @@ ngbe_dev_close(struct rte_eth_dev *dev)
static int
ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
- RTE_SET_USED(dev);
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+
+ dev_info->max_rx_queues = (uint16_t)hw->mac.max_rx_queues;
+
+ dev_info->default_rxconf = (struct rte_eth_rxconf) {
+ .rx_thresh = {
+ .pthresh = NGBE_DEFAULT_RX_PTHRESH,
+ .hthresh = NGBE_DEFAULT_RX_HTHRESH,
+ .wthresh = NGBE_DEFAULT_RX_WTHRESH,
+ },
+ .rx_free_thresh = NGBE_DEFAULT_RX_FREE_THRESH,
+ .rx_drop_en = 0,
+ .offloads = 0,
+ };
+
+ dev_info->rx_desc_lim = rx_desc_lim;
dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_100M |
ETH_LINK_SPEED_10M;
+ /* Driver-preferred Rx/Tx parameters */
+ dev_info->default_rxportconf.nb_queues = 1;
+ dev_info->default_rxportconf.ring_size = 256;
+
return 0;
}
@@ -563,6 +596,8 @@ static const struct eth_dev_ops ngbe_eth_dev_ops = {
.dev_configure = ngbe_dev_configure,
.dev_infos_get = ngbe_dev_info_get,
.link_update = ngbe_dev_link_update,
+ .rx_queue_setup = ngbe_dev_rx_queue_setup,
+ .rx_queue_release = ngbe_dev_rx_queue_release,
};
RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index f076ff9f69..b15db0354e 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -30,6 +30,7 @@ struct ngbe_interrupt {
struct ngbe_adapter {
struct ngbe_hw hw;
struct ngbe_interrupt intr;
+ bool rx_bulk_alloc_allowed;
};
static inline struct ngbe_adapter *
@@ -58,6 +59,13 @@ ngbe_dev_intr(struct rte_eth_dev *dev)
return intr;
}
+void ngbe_dev_rx_queue_release(void *rxq);
+
+int ngbe_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
+ uint16_t nb_rx_desc, unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool);
+
int
ngbe_dev_link_update_share(struct rte_eth_dev *dev,
int wait_to_complete);
@@ -66,4 +74,12 @@ ngbe_dev_link_update_share(struct rte_eth_dev *dev,
#define NGBE_LINK_UP_CHECK_TIMEOUT 1000 /* ms */
#define NGBE_VMDQ_NUM_UC_MAC 4096 /* Maximum nb. of UC MAC addr. */
+/*
+ * Default values for Rx/Tx configuration
+ */
+#define NGBE_DEFAULT_RX_FREE_THRESH 32
+#define NGBE_DEFAULT_RX_PTHRESH 8
+#define NGBE_DEFAULT_RX_HTHRESH 8
+#define NGBE_DEFAULT_RX_WTHRESH 0
+
#endif /* _NGBE_ETHDEV_H_ */
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
new file mode 100644
index 0000000000..96b2ce7527
--- /dev/null
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -0,0 +1,290 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#include <sys/queue.h>
+
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <ethdev_driver.h>
+#include <rte_malloc.h>
+
+#include "ngbe_logs.h"
+#include "base/ngbe.h"
+#include "ngbe_ethdev.h"
+#include "ngbe_rxtx.h"
+
+/**
+ * ngbe_free_sc_cluster - free the not-yet-completed scattered cluster
+ *
+ * The "next" pointer of the last segment of (not-yet-completed) RSC clusters
+ * in the sw_sc_ring is not set to NULL but rather points to the next
+ * mbuf of this RSC aggregation (that has not been completed yet and still
+ * resides on the HW ring). So, instead of calling for rte_pktmbuf_free() we
+ * will just free first "nb_segs" segments of the cluster explicitly by calling
+ * an rte_pktmbuf_free_seg().
+ *
+ * @m scattered cluster head
+ */
+static void __rte_cold
+ngbe_free_sc_cluster(struct rte_mbuf *m)
+{
+ uint16_t i, nb_segs = m->nb_segs;
+ struct rte_mbuf *next_seg;
+
+ for (i = 0; i < nb_segs; i++) {
+ next_seg = m->next;
+ rte_pktmbuf_free_seg(m);
+ m = next_seg;
+ }
+}
+
+static void __rte_cold
+ngbe_rx_queue_release_mbufs(struct ngbe_rx_queue *rxq)
+{
+ unsigned int i;
+
+ if (rxq->sw_ring != NULL) {
+ for (i = 0; i < rxq->nb_rx_desc; i++) {
+ if (rxq->sw_ring[i].mbuf != NULL) {
+ rte_pktmbuf_free_seg(rxq->sw_ring[i].mbuf);
+ rxq->sw_ring[i].mbuf = NULL;
+ }
+ }
+ for (i = 0; i < rxq->rx_nb_avail; ++i) {
+ struct rte_mbuf *mb;
+
+ mb = rxq->rx_stage[rxq->rx_next_avail + i];
+ rte_pktmbuf_free_seg(mb);
+ }
+ rxq->rx_nb_avail = 0;
+ }
+
+ if (rxq->sw_sc_ring != NULL)
+ for (i = 0; i < rxq->nb_rx_desc; i++)
+ if (rxq->sw_sc_ring[i].fbuf != NULL) {
+ ngbe_free_sc_cluster(rxq->sw_sc_ring[i].fbuf);
+ rxq->sw_sc_ring[i].fbuf = NULL;
+ }
+}
+
+static void __rte_cold
+ngbe_rx_queue_release(struct ngbe_rx_queue *rxq)
+{
+ if (rxq != NULL) {
+ ngbe_rx_queue_release_mbufs(rxq);
+ rte_free(rxq->sw_ring);
+ rte_free(rxq->sw_sc_ring);
+ rte_free(rxq);
+ }
+}
+
+void __rte_cold
+ngbe_dev_rx_queue_release(void *rxq)
+{
+ ngbe_rx_queue_release(rxq);
+}
+
+/*
+ * Check if Rx Burst Bulk Alloc function can be used.
+ * Return
+ * 0: the preconditions are satisfied and the bulk allocation function
+ * can be used.
+ * -EINVAL: the preconditions are NOT satisfied and the default Rx burst
+ * function must be used.
+ */
+static inline int __rte_cold
+check_rx_burst_bulk_alloc_preconditions(struct ngbe_rx_queue *rxq)
+{
+ int ret = 0;
+
+ /*
+ * Make sure the following pre-conditions are satisfied:
+ * rxq->rx_free_thresh >= RTE_PMD_NGBE_RX_MAX_BURST
+ * rxq->rx_free_thresh < rxq->nb_rx_desc
+ * (rxq->nb_rx_desc % rxq->rx_free_thresh) == 0
+ * Scattered packets are not supported. This should be checked
+ * outside of this function.
+ */
+ if (rxq->rx_free_thresh < RTE_PMD_NGBE_RX_MAX_BURST) {
+ PMD_INIT_LOG(DEBUG,
+ "Rx Burst Bulk Alloc Preconditions: rxq->rx_free_thresh=%d, RTE_PMD_NGBE_RX_MAX_BURST=%d",
+ rxq->rx_free_thresh, RTE_PMD_NGBE_RX_MAX_BURST);
+ ret = -EINVAL;
+ } else if (rxq->rx_free_thresh >= rxq->nb_rx_desc) {
+ PMD_INIT_LOG(DEBUG,
+ "Rx Burst Bulk Alloc Preconditions: rxq->rx_free_thresh=%d, rxq->nb_rx_desc=%d",
+ rxq->rx_free_thresh, rxq->nb_rx_desc);
+ ret = -EINVAL;
+ } else if ((rxq->nb_rx_desc % rxq->rx_free_thresh) != 0) {
+ PMD_INIT_LOG(DEBUG,
+ "Rx Burst Bulk Alloc Preconditions: rxq->nb_rx_desc=%d, rxq->rx_free_thresh=%d",
+ rxq->nb_rx_desc, rxq->rx_free_thresh);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/* Reset dynamic ngbe_rx_queue fields back to defaults */
+static void __rte_cold
+ngbe_reset_rx_queue(struct ngbe_adapter *adapter, struct ngbe_rx_queue *rxq)
+{
+ static const struct ngbe_rx_desc zeroed_desc = {
+ {{0}, {0} }, {{0}, {0} } };
+ unsigned int i;
+ uint16_t len = rxq->nb_rx_desc;
+
+ /*
+ * By default, the Rx queue setup function allocates enough memory for
+ * NGBE_RING_DESC_MAX. The Rx Burst bulk allocation function requires
+ * extra memory at the end of the descriptor ring to be zero'd out.
+ */
+ if (adapter->rx_bulk_alloc_allowed)
+ /* zero out extra memory */
+ len += RTE_PMD_NGBE_RX_MAX_BURST;
+
+ /*
+ * Zero out HW ring memory. Zero out extra memory at the end of
+ * the H/W ring so look-ahead logic in Rx Burst bulk alloc function
+ * reads extra memory as zeros.
+ */
+ for (i = 0; i < len; i++)
+ rxq->rx_ring[i] = zeroed_desc;
+
+ /*
+ * initialize extra software ring entries. Space for these extra
+ * entries is always allocated
+ */
+ memset(&rxq->fake_mbuf, 0x0, sizeof(rxq->fake_mbuf));
+ for (i = rxq->nb_rx_desc; i < len; ++i)
+ rxq->sw_ring[i].mbuf = &rxq->fake_mbuf;
+
+ rxq->rx_nb_avail = 0;
+ rxq->rx_next_avail = 0;
+ rxq->rx_free_trigger = (uint16_t)(rxq->rx_free_thresh - 1);
+ rxq->rx_tail = 0;
+ rxq->nb_rx_hold = 0;
+ rxq->pkt_first_seg = NULL;
+ rxq->pkt_last_seg = NULL;
+}
+
+int __rte_cold
+ngbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t queue_idx,
+ uint16_t nb_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mp)
+{
+ const struct rte_memzone *rz;
+ struct ngbe_rx_queue *rxq;
+ struct ngbe_hw *hw;
+ uint16_t len;
+ struct ngbe_adapter *adapter = ngbe_dev_adapter(dev);
+
+ PMD_INIT_FUNC_TRACE();
+ hw = ngbe_dev_hw(dev);
+
+ /* Free memory prior to re-allocation if needed... */
+ if (dev->data->rx_queues[queue_idx] != NULL) {
+ ngbe_rx_queue_release(dev->data->rx_queues[queue_idx]);
+ dev->data->rx_queues[queue_idx] = NULL;
+ }
+
+ /* First allocate the Rx queue data structure */
+ rxq = rte_zmalloc_socket("ethdev RX queue",
+ sizeof(struct ngbe_rx_queue),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->mb_pool = mp;
+ rxq->nb_rx_desc = nb_desc;
+ rxq->rx_free_thresh = rx_conf->rx_free_thresh;
+ rxq->queue_id = queue_idx;
+ rxq->reg_idx = queue_idx;
+ rxq->port_id = dev->data->port_id;
+ rxq->drop_en = rx_conf->rx_drop_en;
+ rxq->rx_deferred_start = rx_conf->rx_deferred_start;
+
+ /*
+ * Allocate Rx ring hardware descriptors. A memzone large enough to
+ * handle the maximum ring size is allocated in order to allow for
+ * resizing in later calls to the queue setup function.
+ */
+ rz = rte_eth_dma_zone_reserve(dev, "rx_ring", queue_idx,
+ RX_RING_SZ, NGBE_ALIGN, socket_id);
+ if (rz == NULL) {
+ ngbe_rx_queue_release(rxq);
+ return -ENOMEM;
+ }
+
+ /*
+ * Zero init all the descriptors in the ring.
+ */
+ memset(rz->addr, 0, RX_RING_SZ);
+
+ rxq->rdt_reg_addr = NGBE_REG_ADDR(hw, NGBE_RXWP(rxq->reg_idx));
+ rxq->rdh_reg_addr = NGBE_REG_ADDR(hw, NGBE_RXRP(rxq->reg_idx));
+
+ rxq->rx_ring_phys_addr = TMZ_PADDR(rz);
+ rxq->rx_ring = (struct ngbe_rx_desc *)TMZ_VADDR(rz);
+
+ /*
+ * Certain constraints must be met in order to use the bulk buffer
+ * allocation Rx burst function. If any of Rx queues doesn't meet them
+ * the feature should be disabled for the whole port.
+ */
+ if (check_rx_burst_bulk_alloc_preconditions(rxq)) {
+ PMD_INIT_LOG(DEBUG,
+ "queue[%d] doesn't meet Rx Bulk Alloc preconditions - canceling the feature for the whole port[%d]",
+ rxq->queue_id, rxq->port_id);
+ adapter->rx_bulk_alloc_allowed = false;
+ }
+
+ /*
+ * Allocate software ring. Allow for space at the end of the
+ * S/W ring to make sure look-ahead logic in bulk alloc Rx burst
+ * function does not access an invalid memory region.
+ */
+ len = nb_desc;
+ if (adapter->rx_bulk_alloc_allowed)
+ len += RTE_PMD_NGBE_RX_MAX_BURST;
+
+ rxq->sw_ring = rte_zmalloc_socket("rxq->sw_ring",
+ sizeof(struct ngbe_rx_entry) * len,
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (rxq->sw_ring == NULL) {
+ ngbe_rx_queue_release(rxq);
+ return -ENOMEM;
+ }
+
+ /*
+ * Always allocate even if it's not going to be needed in order to
+ * simplify the code.
+ *
+ * This ring is used in Scattered Rx cases and Scattered Rx may
+ * be requested in ngbe_dev_rx_init(), which is called later from
+ * dev_start() flow.
+ */
+ rxq->sw_sc_ring =
+ rte_zmalloc_socket("rxq->sw_sc_ring",
+ sizeof(struct ngbe_scattered_rx_entry) * len,
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (rxq->sw_sc_ring == NULL) {
+ ngbe_rx_queue_release(rxq);
+ return -ENOMEM;
+ }
+
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p sw_sc_ring=%p hw_ring=%p dma_addr=0x%" PRIx64,
+ rxq->sw_ring, rxq->sw_sc_ring, rxq->rx_ring,
+ rxq->rx_ring_phys_addr);
+
+ dev->data->rx_queues[queue_idx] = rxq;
+
+ ngbe_reset_rx_queue(adapter, rxq);
+
+ return 0;
+}
+
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
new file mode 100644
index 0000000000..52b051420a
--- /dev/null
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
+ * Copyright(c) 2010-2017 Intel Corporation
+ */
+
+#ifndef _NGBE_RXTX_H_
+#define _NGBE_RXTX_H_
+
+/*****************************************************************************
+ * Receive Descriptor
+ *****************************************************************************/
+struct ngbe_rx_desc {
+ struct {
+ union {
+ rte_le32_t dw0;
+ struct {
+ rte_le16_t pkt;
+ rte_le16_t hdr;
+ } lo;
+ };
+ union {
+ rte_le32_t dw1;
+ struct {
+ rte_le16_t ipid;
+ rte_le16_t csum;
+ } hi;
+ };
+ } qw0; /* also as r.pkt_addr */
+ struct {
+ union {
+ rte_le32_t dw2;
+ struct {
+ rte_le32_t status;
+ } lo;
+ };
+ union {
+ rte_le32_t dw3;
+ struct {
+ rte_le16_t len;
+ rte_le16_t tag;
+ } hi;
+ };
+ } qw1; /* also as r.hdr_addr */
+};
+
+#define RTE_PMD_NGBE_RX_MAX_BURST 32
+
+#define RX_RING_SZ ((NGBE_RING_DESC_MAX + RTE_PMD_NGBE_RX_MAX_BURST) * \
+ sizeof(struct ngbe_rx_desc))
+
+
+/**
+ * Structure associated with each descriptor of the Rx ring of a Rx queue.
+ */
+struct ngbe_rx_entry {
+ struct rte_mbuf *mbuf; /**< mbuf associated with Rx descriptor. */
+};
+
+struct ngbe_scattered_rx_entry {
+ struct rte_mbuf *fbuf; /**< First segment of the fragmented packet. */
+};
+
+/**
+ * Structure associated with each Rx queue.
+ */
+struct ngbe_rx_queue {
+ struct rte_mempool *mb_pool; /**< mbuf pool to populate Rx ring. */
+ volatile struct ngbe_rx_desc *rx_ring; /**< Rx ring virtual address. */
+ uint64_t rx_ring_phys_addr; /**< Rx ring DMA address. */
+ volatile uint32_t *rdt_reg_addr; /**< RDT register address. */
+ volatile uint32_t *rdh_reg_addr; /**< RDH register address. */
+ struct ngbe_rx_entry *sw_ring; /**< address of Rx software ring. */
+ /**< address of scattered Rx software ring. */
+ struct ngbe_scattered_rx_entry *sw_sc_ring;
+ struct rte_mbuf *pkt_first_seg; /**< First segment of current packet. */
+ struct rte_mbuf *pkt_last_seg; /**< Last segment of current packet. */
+ uint16_t nb_rx_desc; /**< number of Rx descriptors. */
+ uint16_t rx_tail; /**< current value of RDT register. */
+ uint16_t nb_rx_hold; /**< number of held free Rx desc. */
+ uint16_t rx_nb_avail; /**< nr of staged pkts ready to ret to app */
+ uint16_t rx_next_avail; /**< idx of next staged pkt to ret to app */
+ uint16_t rx_free_trigger; /**< triggers rx buffer allocation */
+ uint16_t rx_free_thresh; /**< max free Rx desc to hold. */
+ uint16_t queue_id; /**< RX queue index. */
+ uint16_t reg_idx; /**< RX queue register index. */
+ /**< Packet type mask for different NICs. */
+ uint16_t port_id; /**< Device port identifier. */
+ uint8_t drop_en; /**< If not 0, set SRRCTL.Drop_En. */
+ uint8_t rx_deferred_start; /**< not in global dev start. */
+ /** need to alloc dummy mbuf, for wraparound when scanning hw ring */
+ struct rte_mbuf fake_mbuf;
+ /** hold packets to return to application */
+ struct rte_mbuf *rx_stage[RTE_PMD_NGBE_RX_MAX_BURST * 2];
+};
+
+#endif /* _NGBE_RXTX_H_ */
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 13/19] net/ngbe: add Tx queue setup and release
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (11 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-07 14:00 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations Jiawen Wu
` (6 subsequent siblings)
19 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Setup device Tx queue and release Tx queue.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/ngbe_ethdev.c | 24 ++++
drivers/net/ngbe/ngbe_ethdev.h | 11 ++
drivers/net/ngbe/ngbe_rxtx.c | 194 +++++++++++++++++++++++++++++++++
drivers/net/ngbe/ngbe_rxtx.h | 95 ++++++++++++++++
4 files changed, 324 insertions(+)
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 9852452154..cd7521dd63 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -44,6 +44,14 @@ static const struct rte_eth_desc_lim rx_desc_lim = {
.nb_align = NGBE_RXD_ALIGN,
};
+static const struct rte_eth_desc_lim tx_desc_lim = {
+ .nb_max = NGBE_RING_DESC_MAX,
+ .nb_min = NGBE_RING_DESC_MIN,
+ .nb_align = NGBE_TXD_ALIGN,
+ .nb_seg_max = NGBE_TX_MAX_SEG,
+ .nb_mtu_seg_max = NGBE_TX_MAX_SEG,
+};
+
static const struct eth_dev_ops ngbe_eth_dev_ops;
static inline void
@@ -283,6 +291,7 @@ ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
struct ngbe_hw *hw = ngbe_dev_hw(dev);
dev_info->max_rx_queues = (uint16_t)hw->mac.max_rx_queues;
+ dev_info->max_tx_queues = (uint16_t)hw->mac.max_tx_queues;
dev_info->default_rxconf = (struct rte_eth_rxconf) {
.rx_thresh = {
@@ -295,14 +304,27 @@ ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
.offloads = 0,
};
+ dev_info->default_txconf = (struct rte_eth_txconf) {
+ .tx_thresh = {
+ .pthresh = NGBE_DEFAULT_TX_PTHRESH,
+ .hthresh = NGBE_DEFAULT_TX_HTHRESH,
+ .wthresh = NGBE_DEFAULT_TX_WTHRESH,
+ },
+ .tx_free_thresh = NGBE_DEFAULT_TX_FREE_THRESH,
+ .offloads = 0,
+ };
+
dev_info->rx_desc_lim = rx_desc_lim;
+ dev_info->tx_desc_lim = tx_desc_lim;
dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_100M |
ETH_LINK_SPEED_10M;
/* Driver-preferred Rx/Tx parameters */
dev_info->default_rxportconf.nb_queues = 1;
+ dev_info->default_txportconf.nb_queues = 1;
dev_info->default_rxportconf.ring_size = 256;
+ dev_info->default_txportconf.ring_size = 256;
return 0;
}
@@ -598,6 +620,8 @@ static const struct eth_dev_ops ngbe_eth_dev_ops = {
.link_update = ngbe_dev_link_update,
.rx_queue_setup = ngbe_dev_rx_queue_setup,
.rx_queue_release = ngbe_dev_rx_queue_release,
+ .tx_queue_setup = ngbe_dev_tx_queue_setup,
+ .tx_queue_release = ngbe_dev_tx_queue_release,
};
RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index b15db0354e..91e5d80665 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -61,11 +61,17 @@ ngbe_dev_intr(struct rte_eth_dev *dev)
void ngbe_dev_rx_queue_release(void *rxq);
+void ngbe_dev_tx_queue_release(void *txq);
+
int ngbe_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
uint16_t nb_rx_desc, unsigned int socket_id,
const struct rte_eth_rxconf *rx_conf,
struct rte_mempool *mb_pool);
+int ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
+ uint16_t nb_tx_desc, unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf);
+
int
ngbe_dev_link_update_share(struct rte_eth_dev *dev,
int wait_to_complete);
@@ -82,4 +88,9 @@ ngbe_dev_link_update_share(struct rte_eth_dev *dev,
#define NGBE_DEFAULT_RX_HTHRESH 8
#define NGBE_DEFAULT_RX_WTHRESH 0
+#define NGBE_DEFAULT_TX_FREE_THRESH 32
+#define NGBE_DEFAULT_TX_PTHRESH 32
+#define NGBE_DEFAULT_TX_HTHRESH 0
+#define NGBE_DEFAULT_TX_WTHRESH 0
+
#endif /* _NGBE_ETHDEV_H_ */
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 96b2ce7527..5187f28e3b 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -15,6 +15,200 @@
#include "ngbe_ethdev.h"
#include "ngbe_rxtx.h"
+/*********************************************************************
+ *
+ * Queue management functions
+ *
+ **********************************************************************/
+
+static void __rte_cold
+ngbe_tx_queue_release_mbufs(struct ngbe_tx_queue *txq)
+{
+ unsigned int i;
+
+ if (txq->sw_ring != NULL) {
+ for (i = 0; i < txq->nb_tx_desc; i++) {
+ if (txq->sw_ring[i].mbuf != NULL) {
+ rte_pktmbuf_free_seg(txq->sw_ring[i].mbuf);
+ txq->sw_ring[i].mbuf = NULL;
+ }
+ }
+ }
+}
+
+static void __rte_cold
+ngbe_tx_free_swring(struct ngbe_tx_queue *txq)
+{
+ if (txq != NULL)
+ rte_free(txq->sw_ring);
+}
+
+static void __rte_cold
+ngbe_tx_queue_release(struct ngbe_tx_queue *txq)
+{
+ if (txq != NULL) {
+ if (txq->ops != NULL) {
+ txq->ops->release_mbufs(txq);
+ txq->ops->free_swring(txq);
+ }
+ rte_free(txq);
+ }
+}
+
+void __rte_cold
+ngbe_dev_tx_queue_release(void *txq)
+{
+ ngbe_tx_queue_release(txq);
+}
+
+/* (Re)set dynamic ngbe_tx_queue fields to defaults */
+static void __rte_cold
+ngbe_reset_tx_queue(struct ngbe_tx_queue *txq)
+{
+ static const struct ngbe_tx_desc zeroed_desc = {0};
+ struct ngbe_tx_entry *txe = txq->sw_ring;
+ uint16_t prev, i;
+
+ /* Zero out HW ring memory */
+ for (i = 0; i < txq->nb_tx_desc; i++)
+ txq->tx_ring[i] = zeroed_desc;
+
+ /* Initialize SW ring entries */
+ prev = (uint16_t)(txq->nb_tx_desc - 1);
+ for (i = 0; i < txq->nb_tx_desc; i++) {
+ /* the ring can also be modified by hardware */
+ volatile struct ngbe_tx_desc *txd = &txq->tx_ring[i];
+
+ txd->dw3 = rte_cpu_to_le_32(NGBE_TXD_DD);
+ txe[i].mbuf = NULL;
+ txe[i].last_id = i;
+ txe[prev].next_id = i;
+ prev = i;
+ }
+
+ txq->tx_next_dd = (uint16_t)(txq->tx_free_thresh - 1);
+ txq->tx_tail = 0;
+
+ /*
+ * Always allow 1 descriptor to be un-allocated to avoid
+ * a H/W race condition
+ */
+ txq->last_desc_cleaned = (uint16_t)(txq->nb_tx_desc - 1);
+ txq->nb_tx_free = (uint16_t)(txq->nb_tx_desc - 1);
+ txq->ctx_curr = 0;
+ memset((void *)&txq->ctx_cache, 0,
+ NGBE_CTX_NUM * sizeof(struct ngbe_ctx_info));
+}
+
+static const struct ngbe_txq_ops def_txq_ops = {
+ .release_mbufs = ngbe_tx_queue_release_mbufs,
+ .free_swring = ngbe_tx_free_swring,
+ .reset = ngbe_reset_tx_queue,
+};
+
+int __rte_cold
+ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t queue_idx,
+ uint16_t nb_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ const struct rte_memzone *tz;
+ struct ngbe_tx_queue *txq;
+ struct ngbe_hw *hw;
+ uint16_t tx_free_thresh;
+
+ PMD_INIT_FUNC_TRACE();
+ hw = ngbe_dev_hw(dev);
+
+ /*
+ * The Tx descriptor ring will be cleaned after txq->tx_free_thresh
+ * descriptors are used or if the number of descriptors required
+ * to transmit a packet is greater than the number of free Tx
+ * descriptors.
+ * One descriptor in the Tx ring is used as a sentinel to avoid a
+ * H/W race condition, hence the maximum threshold constraints.
+ * When set to zero use default values.
+ */
+ tx_free_thresh = (uint16_t)((tx_conf->tx_free_thresh) ?
+ tx_conf->tx_free_thresh : DEFAULT_TX_FREE_THRESH);
+ if (tx_free_thresh >= (nb_desc - 3)) {
+ PMD_INIT_LOG(ERR,
+ "tx_free_thresh must be less than the number of TX descriptors minus 3. (tx_free_thresh=%u port=%d queue=%d)",
+ (unsigned int)tx_free_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
+ return -(EINVAL);
+ }
+
+ if (nb_desc % tx_free_thresh != 0) {
+ PMD_INIT_LOG(ERR,
+ "tx_free_thresh must be a divisor of the number of Tx descriptors. (tx_free_thresh=%u port=%d queue=%d)",
+ (unsigned int)tx_free_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
+ return -(EINVAL);
+ }
+
+ /* Free memory prior to re-allocation if needed... */
+ if (dev->data->tx_queues[queue_idx] != NULL) {
+ ngbe_tx_queue_release(dev->data->tx_queues[queue_idx]);
+ dev->data->tx_queues[queue_idx] = NULL;
+ }
+
+ /* First allocate the Tx queue data structure */
+ txq = rte_zmalloc_socket("ethdev Tx queue",
+ sizeof(struct ngbe_tx_queue),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (txq == NULL)
+ return -ENOMEM;
+
+ /*
+ * Allocate Tx ring hardware descriptors. A memzone large enough to
+ * handle the maximum ring size is allocated in order to allow for
+ * resizing in later calls to the queue setup function.
+ */
+ tz = rte_eth_dma_zone_reserve(dev, "tx_ring", queue_idx,
+ sizeof(struct ngbe_tx_desc) * NGBE_RING_DESC_MAX,
+ NGBE_ALIGN, socket_id);
+ if (tz == NULL) {
+ ngbe_tx_queue_release(txq);
+ return -ENOMEM;
+ }
+
+ txq->nb_tx_desc = nb_desc;
+ txq->tx_free_thresh = tx_free_thresh;
+ txq->pthresh = tx_conf->tx_thresh.pthresh;
+ txq->hthresh = tx_conf->tx_thresh.hthresh;
+ txq->wthresh = tx_conf->tx_thresh.wthresh;
+ txq->queue_id = queue_idx;
+ txq->reg_idx = queue_idx;
+ txq->port_id = dev->data->port_id;
+ txq->ops = &def_txq_ops;
+ txq->tx_deferred_start = tx_conf->tx_deferred_start;
+
+ txq->tdt_reg_addr = NGBE_REG_ADDR(hw, NGBE_TXWP(txq->reg_idx));
+ txq->tdc_reg_addr = NGBE_REG_ADDR(hw, NGBE_TXCFG(txq->reg_idx));
+
+ txq->tx_ring_phys_addr = TMZ_PADDR(tz);
+ txq->tx_ring = (struct ngbe_tx_desc *)TMZ_VADDR(tz);
+
+ /* Allocate software ring */
+ txq->sw_ring = rte_zmalloc_socket("txq->sw_ring",
+ sizeof(struct ngbe_tx_entry) * nb_desc,
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (txq->sw_ring == NULL) {
+ ngbe_tx_queue_release(txq);
+ return -ENOMEM;
+ }
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%" PRIx64,
+ txq->sw_ring, txq->tx_ring, txq->tx_ring_phys_addr);
+
+ txq->ops->reset(txq);
+
+ dev->data->tx_queues[queue_idx] = txq;
+
+ return 0;
+}
+
/**
* ngbe_free_sc_cluster - free the not-yet-completed scattered cluster
*
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
index 52b051420a..3b567b767b 100644
--- a/drivers/net/ngbe/ngbe_rxtx.h
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -43,11 +43,41 @@ struct ngbe_rx_desc {
} qw1; /* also as r.hdr_addr */
};
+/*****************************************************************************
+ * Transmit Descriptor
+ *****************************************************************************/
+/**
+ * Transmit Context Descriptor (NGBE_TXD_TYP=CTXT)
+ **/
+struct ngbe_tx_ctx_desc {
+ rte_le32_t dw0; /* w.vlan_macip_lens */
+ rte_le32_t dw1; /* w.seqnum_seed */
+ rte_le32_t dw2; /* w.type_tucmd_mlhl */
+ rte_le32_t dw3; /* w.mss_l4len_idx */
+};
+
+/* @ngbe_tx_ctx_desc.dw3 */
+#define NGBE_TXD_DD MS(0, 0x1) /* descriptor done */
+
+/**
+ * Transmit Data Descriptor (NGBE_TXD_TYP=DATA)
+ **/
+struct ngbe_tx_desc {
+ rte_le64_t qw0; /* r.buffer_addr , w.reserved */
+ rte_le32_t dw2; /* r.cmd_type_len, w.nxtseq_seed */
+ rte_le32_t dw3; /* r.olinfo_status, w.status */
+};
+
#define RTE_PMD_NGBE_RX_MAX_BURST 32
#define RX_RING_SZ ((NGBE_RING_DESC_MAX + RTE_PMD_NGBE_RX_MAX_BURST) * \
sizeof(struct ngbe_rx_desc))
+#define NGBE_TX_MAX_SEG 40
+
+#ifndef DEFAULT_TX_FREE_THRESH
+#define DEFAULT_TX_FREE_THRESH 32
+#endif
/**
* Structure associated with each descriptor of the Rx ring of a Rx queue.
@@ -60,6 +90,15 @@ struct ngbe_scattered_rx_entry {
struct rte_mbuf *fbuf; /**< First segment of the fragmented packet. */
};
+/**
+ * Structure associated with each descriptor of the Tx ring of a Tx queue.
+ */
+struct ngbe_tx_entry {
+ struct rte_mbuf *mbuf; /**< mbuf associated with Tx desc, if any. */
+ uint16_t next_id; /**< Index of next descriptor in ring. */
+ uint16_t last_id; /**< Index of last scattered descriptor. */
+};
+
/**
* Structure associated with each Rx queue.
*/
@@ -93,4 +132,60 @@ struct ngbe_rx_queue {
struct rte_mbuf *rx_stage[RTE_PMD_NGBE_RX_MAX_BURST * 2];
};
+/**
+ * NGBE CTX Constants
+ */
+enum ngbe_ctx_num {
+ NGBE_CTX_0 = 0, /**< CTX0 */
+ NGBE_CTX_1 = 1, /**< CTX1 */
+ NGBE_CTX_NUM = 2, /**< CTX NUMBER */
+};
+
+/**
+ * Structure to check if new context need be built
+ */
+struct ngbe_ctx_info {
+ uint64_t flags; /**< ol_flags for context build. */
+};
+
+/**
+ * Structure associated with each Tx queue.
+ */
+struct ngbe_tx_queue {
+ /** Tx ring virtual address. */
+ volatile struct ngbe_tx_desc *tx_ring;
+ uint64_t tx_ring_phys_addr; /**< Tx ring DMA address. */
+ struct ngbe_tx_entry *sw_ring; /**< address of SW ring for scalar PMD.*/
+ volatile uint32_t *tdt_reg_addr; /**< Address of TDT register. */
+ volatile uint32_t *tdc_reg_addr; /**< Address of TDC register. */
+ uint16_t nb_tx_desc; /**< number of Tx descriptors. */
+ uint16_t tx_tail; /**< current value of TDT reg. */
+ /**< Start freeing Tx buffers if there are less free descriptors than
+ * this value.
+ */
+ uint16_t tx_free_thresh;
+ /** Index to last Tx descriptor to have been cleaned. */
+ uint16_t last_desc_cleaned;
+ /** Total number of Tx descriptors ready to be allocated. */
+ uint16_t nb_tx_free;
+ uint16_t tx_next_dd; /**< next desc to scan for DD bit */
+ uint16_t queue_id; /**< Tx queue index. */
+ uint16_t reg_idx; /**< Tx queue register index. */
+ uint16_t port_id; /**< Device port identifier. */
+ uint8_t pthresh; /**< Prefetch threshold register. */
+ uint8_t hthresh; /**< Host threshold register. */
+ uint8_t wthresh; /**< Write-back threshold reg. */
+ uint32_t ctx_curr; /**< Hardware context states. */
+ /** Hardware context0 history. */
+ struct ngbe_ctx_info ctx_cache[NGBE_CTX_NUM];
+ const struct ngbe_txq_ops *ops; /**< txq ops */
+ uint8_t tx_deferred_start; /**< not in global dev start. */
+};
+
+struct ngbe_txq_ops {
+ void (*release_mbufs)(struct ngbe_tx_queue *txq);
+ void (*free_swring)(struct ngbe_tx_queue *txq);
+ void (*reset)(struct ngbe_tx_queue *txq);
+};
+
#endif /* _NGBE_RXTX_H_ */
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (12 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 13/19] net/ngbe: add Tx " Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-07 14:04 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 15/19] net/ngbe: add Tx queue start and stop Jiawen Wu
` (5 subsequent siblings)
19 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Setup MSI-X interrupt, complete PHY configuration and set device link
speed to start device. Disable interrupt, stop hardware and clear queues
to stop device.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_dummy.h | 16 +
drivers/net/ngbe/base/ngbe_hw.c | 49 +++
drivers/net/ngbe/base/ngbe_hw.h | 4 +
drivers/net/ngbe/base/ngbe_phy.c | 3 +
drivers/net/ngbe/base/ngbe_phy_mvl.c | 64 ++++
drivers/net/ngbe/base/ngbe_phy_mvl.h | 1 +
drivers/net/ngbe/base/ngbe_phy_rtl.c | 58 ++++
drivers/net/ngbe/base/ngbe_phy_rtl.h | 2 +
drivers/net/ngbe/base/ngbe_phy_yt.c | 26 ++
drivers/net/ngbe/base/ngbe_phy_yt.h | 1 +
drivers/net/ngbe/base/ngbe_type.h | 9 +
drivers/net/ngbe/ngbe_ethdev.c | 473 ++++++++++++++++++++++++++-
drivers/net/ngbe/ngbe_ethdev.h | 17 +
drivers/net/ngbe/ngbe_rxtx.c | 59 ++++
14 files changed, 781 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 1b74710b09..387bb16aec 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -47,6 +47,10 @@ static inline s32 ngbe_mac_reset_hw_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_mac_start_hw_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_stop_hw_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
@@ -74,6 +78,11 @@ static inline s32 ngbe_mac_check_link_dummy(struct ngbe_hw *TUP0, u32 *TUP1,
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_mac_get_link_capabilities_dummy(struct ngbe_hw *TUP0,
+ u32 *TUP1, bool *TUP2)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_set_rar_dummy(struct ngbe_hw *TUP0, u32 TUP1,
u8 *TUP2, u32 TUP3, u32 TUP4)
{
@@ -110,6 +119,10 @@ static inline s32 ngbe_phy_identify_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_phy_init_hw_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_phy_reset_hw_dummy(struct ngbe_hw *TUP0)
{
return NGBE_ERR_OPS_DUMMY;
@@ -151,12 +164,14 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->rom.validate_checksum = ngbe_rom_validate_checksum_dummy;
hw->mac.init_hw = ngbe_mac_init_hw_dummy;
hw->mac.reset_hw = ngbe_mac_reset_hw_dummy;
+ hw->mac.start_hw = ngbe_mac_start_hw_dummy;
hw->mac.stop_hw = ngbe_mac_stop_hw_dummy;
hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy;
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
hw->mac.setup_link = ngbe_mac_setup_link_dummy;
hw->mac.check_link = ngbe_mac_check_link_dummy;
+ hw->mac.get_link_capabilities = ngbe_mac_get_link_capabilities_dummy;
hw->mac.set_rar = ngbe_mac_set_rar_dummy;
hw->mac.clear_rar = ngbe_mac_clear_rar_dummy;
hw->mac.set_vmdq = ngbe_mac_set_vmdq_dummy;
@@ -165,6 +180,7 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.init_thermal_sensor_thresh = ngbe_mac_init_thermal_ssth_dummy;
hw->mac.check_overtemp = ngbe_mac_check_overtemp_dummy;
hw->phy.identify = ngbe_phy_identify_dummy;
+ hw->phy.init_hw = ngbe_phy_init_hw_dummy;
hw->phy.reset_hw = ngbe_phy_reset_hw_dummy;
hw->phy.read_reg = ngbe_phy_read_reg_dummy;
hw->phy.write_reg = ngbe_phy_write_reg_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 3683475970..87c02a8f1f 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -9,6 +9,22 @@
#include "ngbe_mng.h"
#include "ngbe_hw.h"
+/**
+ * ngbe_start_hw - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware.
+ **/
+s32 ngbe_start_hw(struct ngbe_hw *hw)
+{
+ DEBUGFUNC("ngbe_start_hw");
+
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+ return 0;
+}
+
/**
* ngbe_init_hw - Generic hardware initialization
* @hw: pointer to hardware structure
@@ -27,6 +43,10 @@ s32 ngbe_init_hw(struct ngbe_hw *hw)
/* Reset the hardware */
status = hw->mac.reset_hw(hw);
+ if (status == 0) {
+ /* Start the HW */
+ status = hw->mac.start_hw(hw);
+ }
if (status != 0)
DEBUGOUT("Failed to initialize HW, STATUS = %d\n", status);
@@ -633,6 +653,29 @@ s32 ngbe_check_mac_link_em(struct ngbe_hw *hw, u32 *speed,
return status;
}
+s32 ngbe_get_link_capabilities_em(struct ngbe_hw *hw,
+ u32 *speed,
+ bool *autoneg)
+{
+ s32 status = 0;
+
+ DEBUGFUNC("\n");
+
+ hw->mac.autoneg = *autoneg;
+
+ switch (hw->sub_device_id) {
+ case NGBE_SUB_DEV_ID_EM_RTL_SGMII:
+ *speed = NGBE_LINK_SPEED_1GB_FULL |
+ NGBE_LINK_SPEED_100M_FULL |
+ NGBE_LINK_SPEED_10M_FULL;
+ break;
+ default:
+ break;
+ }
+
+ return status;
+}
+
s32 ngbe_setup_mac_link_em(struct ngbe_hw *hw,
u32 speed,
bool autoneg_wait_to_complete)
@@ -842,6 +885,7 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
/* MAC */
mac->init_hw = ngbe_init_hw;
mac->reset_hw = ngbe_reset_hw_em;
+ mac->start_hw = ngbe_start_hw;
mac->get_mac_addr = ngbe_get_mac_addr;
mac->stop_hw = ngbe_stop_hw;
mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
@@ -855,6 +899,7 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
mac->clear_vmdq = ngbe_clear_vmdq;
/* Link */
+ mac->get_link_capabilities = ngbe_get_link_capabilities_em;
mac->check_link = ngbe_check_mac_link_em;
mac->setup_link = ngbe_setup_mac_link_em;
@@ -871,6 +916,10 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
mac->max_rx_queues = NGBE_EM_MAX_RX_QUEUES;
mac->max_tx_queues = NGBE_EM_MAX_TX_QUEUES;
+ mac->default_speeds = NGBE_LINK_SPEED_10M_FULL |
+ NGBE_LINK_SPEED_100M_FULL |
+ NGBE_LINK_SPEED_1GB_FULL;
+
return 0;
}
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 9b71e4b0dd..791d15fbec 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -14,6 +14,7 @@
#define NGBE_EM_MC_TBL_SIZE 32
s32 ngbe_init_hw(struct ngbe_hw *hw);
+s32 ngbe_start_hw(struct ngbe_hw *hw);
s32 ngbe_reset_hw_em(struct ngbe_hw *hw);
s32 ngbe_stop_hw(struct ngbe_hw *hw);
s32 ngbe_get_mac_addr(struct ngbe_hw *hw, u8 *mac_addr);
@@ -22,6 +23,9 @@ void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw);
s32 ngbe_check_mac_link_em(struct ngbe_hw *hw, u32 *speed,
bool *link_up, bool link_up_wait_to_complete);
+s32 ngbe_get_link_capabilities_em(struct ngbe_hw *hw,
+ u32 *speed,
+ bool *autoneg);
s32 ngbe_setup_mac_link_em(struct ngbe_hw *hw,
u32 speed,
bool autoneg_wait_to_complete);
diff --git a/drivers/net/ngbe/base/ngbe_phy.c b/drivers/net/ngbe/base/ngbe_phy.c
index f0265d83b8..691171ee9f 100644
--- a/drivers/net/ngbe/base/ngbe_phy.c
+++ b/drivers/net/ngbe/base/ngbe_phy.c
@@ -426,16 +426,19 @@ s32 ngbe_init_phy(struct ngbe_hw *hw)
/* Set necessary function pointers based on PHY type */
switch (hw->phy.type) {
case ngbe_phy_rtl:
+ hw->phy.init_hw = ngbe_init_phy_rtl;
hw->phy.check_link = ngbe_check_phy_link_rtl;
hw->phy.setup_link = ngbe_setup_phy_link_rtl;
break;
case ngbe_phy_mvl:
case ngbe_phy_mvl_sfi:
+ hw->phy.init_hw = ngbe_init_phy_mvl;
hw->phy.check_link = ngbe_check_phy_link_mvl;
hw->phy.setup_link = ngbe_setup_phy_link_mvl;
break;
case ngbe_phy_yt8521s:
case ngbe_phy_yt8521s_sfi:
+ hw->phy.init_hw = ngbe_init_phy_yt;
hw->phy.check_link = ngbe_check_phy_link_yt;
hw->phy.setup_link = ngbe_setup_phy_link_yt;
default:
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.c b/drivers/net/ngbe/base/ngbe_phy_mvl.c
index f8cb6cd38a..86b0a072c1 100644
--- a/drivers/net/ngbe/base/ngbe_phy_mvl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.c
@@ -48,6 +48,70 @@ s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw,
return 0;
}
+s32 ngbe_init_phy_mvl(struct ngbe_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 value = 0;
+ int i;
+
+ DEBUGFUNC("ngbe_init_phy_mvl");
+
+ /* enable interrupts, only link status change and an done is allowed */
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 2);
+ ngbe_read_phy_reg_mdi(hw, MVL_RGM_CTL2, 0, &value);
+ value &= ~MVL_RGM_CTL2_TTC;
+ value |= MVL_RGM_CTL2_RTC;
+ ngbe_write_phy_reg_mdi(hw, MVL_RGM_CTL2, 0, value);
+
+ hw->phy.write_reg(hw, MVL_CTRL, 0, MVL_CTRL_RESET);
+ for (i = 0; i < 15; i++) {
+ ngbe_read_phy_reg_mdi(hw, MVL_CTRL, 0, &value);
+ if (value & MVL_CTRL_RESET)
+ msleep(1);
+ else
+ break;
+ }
+
+ if (i == 15) {
+ DEBUGOUT("phy reset exceeds maximum waiting period.\n");
+ return NGBE_ERR_TIMEOUT;
+ }
+
+ ret_val = hw->phy.reset_hw(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* set LED2 to interrupt output and INTn active low */
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 3);
+ ngbe_read_phy_reg_mdi(hw, MVL_LEDTCR, 0, &value);
+ value |= MVL_LEDTCR_INTR_EN;
+ value &= ~(MVL_LEDTCR_INTR_POL);
+ ngbe_write_phy_reg_mdi(hw, MVL_LEDTCR, 0, value);
+
+ if (hw->phy.type == ngbe_phy_mvl_sfi) {
+ hw->phy.read_reg(hw, MVL_CTRL1, 0, &value);
+ value &= ~MVL_CTRL1_INTR_POL;
+ ngbe_write_phy_reg_mdi(hw, MVL_CTRL1, 0, value);
+ }
+
+ /* enable link status change and AN complete interrupts */
+ value = MVL_INTR_EN_ANC | MVL_INTR_EN_LSC;
+ hw->phy.write_reg(hw, MVL_INTR_EN, 0, value);
+
+ /* LED control */
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 3);
+ ngbe_read_phy_reg_mdi(hw, MVL_LEDFCR, 0, &value);
+ value &= ~(MVL_LEDFCR_CTL0 | MVL_LEDFCR_CTL1);
+ value |= MVL_LEDFCR_CTL0_CONF | MVL_LEDFCR_CTL1_CONF;
+ ngbe_write_phy_reg_mdi(hw, MVL_LEDFCR, 0, value);
+ ngbe_read_phy_reg_mdi(hw, MVL_LEDPCR, 0, &value);
+ value &= ~(MVL_LEDPCR_CTL0 | MVL_LEDPCR_CTL1);
+ value |= MVL_LEDPCR_CTL0_CONF | MVL_LEDPCR_CTL1_CONF;
+ ngbe_write_phy_reg_mdi(hw, MVL_LEDPCR, 0, value);
+
+ return ret_val;
+}
+
s32 ngbe_setup_phy_link_mvl(struct ngbe_hw *hw, u32 speed,
bool autoneg_wait_to_complete)
{
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.h b/drivers/net/ngbe/base/ngbe_phy_mvl.h
index c8155c39a0..74d5ecba77 100644
--- a/drivers/net/ngbe/base/ngbe_phy_mvl.h
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.h
@@ -86,6 +86,7 @@ s32 ngbe_read_phy_reg_mvl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
u16 *phy_data);
s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
u16 phy_data);
+s32 ngbe_init_phy_mvl(struct ngbe_hw *hw);
s32 ngbe_reset_phy_mvl(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.c b/drivers/net/ngbe/base/ngbe_phy_rtl.c
index a45b0f0a55..83830921c2 100644
--- a/drivers/net/ngbe/base/ngbe_phy_rtl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.c
@@ -38,6 +38,64 @@ s32 ngbe_write_phy_reg_rtl(struct ngbe_hw *hw,
return 0;
}
+s32 ngbe_init_phy_rtl(struct ngbe_hw *hw)
+{
+ int i;
+ u16 value = 0;
+
+ /* enable interrupts, only link status change and an done is allowed */
+ value = RTL_INER_LSC | RTL_INER_ANC;
+ hw->phy.write_reg(hw, RTL_INER, 0xa42, value);
+
+ hw->phy.read_reg(hw, RTL_INSR, 0xa43, &value);
+
+ for (i = 0; i < 15; i++) {
+ if (!rd32m(hw, NGBE_STAT,
+ NGBE_STAT_GPHY_IN_RST(hw->bus.lan_id)))
+ break;
+
+ msec_delay(10);
+ }
+ if (i == 15) {
+ DEBUGOUT("GPhy reset exceeds maximum times.\n");
+ return NGBE_ERR_PHY_TIMEOUT;
+ }
+
+ for (i = 0; i < 1000; i++) {
+ hw->phy.read_reg(hw, RTL_INSR, 0xa43, &value);
+ if (value & RTL_INSR_ACCESS)
+ break;
+ }
+
+ hw->phy.write_reg(hw, RTL_SCR, 0xa46, RTL_SCR_EFUSE);
+ for (i = 0; i < 1000; i++) {
+ hw->phy.read_reg(hw, RTL_INSR, 0xa43, &value);
+ if (value & RTL_INSR_ACCESS)
+ break;
+ }
+ if (i == 1000)
+ return NGBE_ERR_PHY_TIMEOUT;
+
+ hw->phy.write_reg(hw, RTL_SCR, 0xa46, RTL_SCR_EXTINI);
+ for (i = 0; i < 1000; i++) {
+ hw->phy.read_reg(hw, RTL_INSR, 0xa43, &value);
+ if (value & RTL_INSR_ACCESS)
+ break;
+ }
+ if (i == 1000)
+ return NGBE_ERR_PHY_TIMEOUT;
+
+ for (i = 0; i < 1000; i++) {
+ hw->phy.read_reg(hw, RTL_GSR, 0xa42, &value);
+ if ((value & RTL_GSR_ST) == RTL_GSR_ST_LANON)
+ break;
+ }
+ if (i == 1000)
+ return NGBE_ERR_PHY_TIMEOUT;
+
+ return 0;
+}
+
/**
* ngbe_setup_phy_link_rtl - Set and restart auto-neg
* @hw: pointer to hardware structure
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.h b/drivers/net/ngbe/base/ngbe_phy_rtl.h
index ee5e03e9f3..9ce2058eac 100644
--- a/drivers/net/ngbe/base/ngbe_phy_rtl.h
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.h
@@ -80,6 +80,8 @@ s32 ngbe_write_phy_reg_rtl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
s32 ngbe_setup_phy_link_rtl(struct ngbe_hw *hw,
u32 speed, bool autoneg_wait_to_complete);
+
+s32 ngbe_init_phy_rtl(struct ngbe_hw *hw);
s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw);
s32 ngbe_check_phy_link_rtl(struct ngbe_hw *hw,
u32 *speed, bool *link_up);
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.c b/drivers/net/ngbe/base/ngbe_phy_yt.c
index 4a44414c64..2a7061c100 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.c
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.c
@@ -98,6 +98,32 @@ s32 ngbe_write_phy_reg_sds_ext_yt(struct ngbe_hw *hw,
return 0;
}
+s32 ngbe_init_phy_yt(struct ngbe_hw *hw)
+{
+ u16 value = 0;
+
+ DEBUGFUNC("ngbe_init_phy_yt");
+
+ if (hw->phy.type != ngbe_phy_yt8521s_sfi)
+ return 0;
+
+ /* select sds area register */
+ ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, 0, 0);
+ /* enable interrupts */
+ ngbe_write_phy_reg_mdi(hw, YT_INTR, 0, YT_INTR_ENA_MASK);
+
+ /* select fiber_to_rgmii first in multiplex */
+ ngbe_read_phy_reg_ext_yt(hw, YT_MISC, 0, &value);
+ value |= YT_MISC_FIBER_PRIO;
+ ngbe_write_phy_reg_ext_yt(hw, YT_MISC, 0, value);
+
+ hw->phy.read_reg(hw, YT_BCR, 0, &value);
+ value |= YT_BCR_PWDN;
+ hw->phy.write_reg(hw, YT_BCR, 0, value);
+
+ return 0;
+}
+
s32 ngbe_setup_phy_link_yt(struct ngbe_hw *hw, u32 speed,
bool autoneg_wait_to_complete)
{
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.h b/drivers/net/ngbe/base/ngbe_phy_yt.h
index f7a0cb873c..157339cce8 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.h
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.h
@@ -65,6 +65,7 @@ s32 ngbe_read_phy_reg_sds_ext_yt(struct ngbe_hw *hw,
u32 reg_addr, u32 device_type, u16 *phy_data);
s32 ngbe_write_phy_reg_sds_ext_yt(struct ngbe_hw *hw,
u32 reg_addr, u32 device_type, u16 phy_data);
+s32 ngbe_init_phy_yt(struct ngbe_hw *hw);
s32 ngbe_reset_phy_yt(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 472c0c1bea..3f6698be15 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -94,15 +94,20 @@ struct ngbe_rom_info {
struct ngbe_mac_info {
s32 (*init_hw)(struct ngbe_hw *hw);
s32 (*reset_hw)(struct ngbe_hw *hw);
+ s32 (*start_hw)(struct ngbe_hw *hw);
s32 (*stop_hw)(struct ngbe_hw *hw);
s32 (*get_mac_addr)(struct ngbe_hw *hw, u8 *mac_addr);
s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
+ /* Link */
s32 (*setup_link)(struct ngbe_hw *hw, u32 speed,
bool autoneg_wait_to_complete);
s32 (*check_link)(struct ngbe_hw *hw, u32 *speed,
bool *link_up, bool link_up_wait_to_complete);
+ s32 (*get_link_capabilities)(struct ngbe_hw *hw,
+ u32 *speed, bool *autoneg);
+
/* RAR */
s32 (*set_rar)(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
@@ -128,11 +133,13 @@ struct ngbe_mac_info {
bool set_lben;
u32 max_link_up_time;
+ u32 default_speeds;
bool autoneg;
};
struct ngbe_phy_info {
s32 (*identify)(struct ngbe_hw *hw);
+ s32 (*init_hw)(struct ngbe_hw *hw);
s32 (*reset_hw)(struct ngbe_hw *hw);
s32 (*read_reg)(struct ngbe_hw *hw, u32 reg_addr,
u32 device_type, u16 *phy_data);
@@ -180,6 +187,8 @@ struct ngbe_hw {
uint64_t isb_dma;
void IOMEM *isb_mem;
+ u16 nb_rx_queues;
+ u16 nb_tx_queues;
bool is_pf;
};
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index cd7521dd63..f88e71b855 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -15,9 +15,17 @@
#include "ngbe_rxtx.h"
static int ngbe_dev_close(struct rte_eth_dev *dev);
-
+static int ngbe_dev_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete);
+
+static void ngbe_dev_link_status_print(struct rte_eth_dev *dev);
+static int ngbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev, uint8_t on);
+static int ngbe_dev_macsec_interrupt_setup(struct rte_eth_dev *dev);
+static int ngbe_dev_misc_interrupt_setup(struct rte_eth_dev *dev);
+static int ngbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev);
static void ngbe_dev_interrupt_handler(void *param);
static void ngbe_dev_interrupt_delayed_handler(void *param);
+static void ngbe_configure_msix(struct rte_eth_dev *dev);
/*
* The set of PCI devices this driver supports
@@ -54,6 +62,25 @@ static const struct rte_eth_desc_lim tx_desc_lim = {
static const struct eth_dev_ops ngbe_eth_dev_ops;
+static inline int32_t
+ngbe_pf_reset_hw(struct ngbe_hw *hw)
+{
+ uint32_t ctrl_ext;
+ int32_t status;
+
+ status = hw->mac.reset_hw(hw);
+
+ ctrl_ext = rd32(hw, NGBE_PORTCTL);
+ /* Set PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext |= NGBE_PORTCTL_RSTDONE;
+ wr32(hw, NGBE_PORTCTL, ctrl_ext);
+ ngbe_flush(hw);
+
+ if (status == NGBE_ERR_SFP_NOT_PRESENT)
+ status = 0;
+ return status;
+}
+
static inline void
ngbe_enable_intr(struct rte_eth_dev *dev)
{
@@ -198,6 +225,13 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
wr32(hw, NGBE_PORTCTL, ctrl_ext);
ngbe_flush(hw);
+ PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d",
+ (int)hw->mac.type, (int)hw->phy.type);
+
+ PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
+ eth_dev->data->port_id, pci_dev->id.vendor_id,
+ pci_dev->id.device_id);
+
rte_intr_callback_register(intr_handle,
ngbe_dev_interrupt_handler, eth_dev);
@@ -272,6 +306,249 @@ ngbe_dev_configure(struct rte_eth_dev *dev)
return 0;
}
+static void
+ngbe_dev_phy_intr_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ wr32(hw, NGBE_GPIODIR, NGBE_GPIODIR_DDR(1));
+ wr32(hw, NGBE_GPIOINTEN, NGBE_GPIOINTEN_INT(3));
+ wr32(hw, NGBE_GPIOINTTYPE, NGBE_GPIOINTTYPE_LEVEL(0));
+ if (hw->phy.type == ngbe_phy_yt8521s_sfi)
+ wr32(hw, NGBE_GPIOINTPOL, NGBE_GPIOINTPOL_ACT(0));
+ else
+ wr32(hw, NGBE_GPIOINTPOL, NGBE_GPIOINTPOL_ACT(3));
+
+ intr->mask_misc |= NGBE_ICRMISC_GPIO;
+}
+
+/*
+ * Configure device link speed and setup link.
+ * It returns 0 on success.
+ */
+static int
+ngbe_dev_start(struct rte_eth_dev *dev)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ uint32_t intr_vector = 0;
+ int err;
+ bool link_up = false, negotiate = false;
+ uint32_t speed = 0;
+ uint32_t allowed_speeds = 0;
+ int status;
+ uint32_t *link_speeds;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* disable uio/vfio intr/eventfd mapping */
+ rte_intr_disable(intr_handle);
+
+ /* stop adapter */
+ hw->adapter_stopped = 0;
+ ngbe_stop_hw(hw);
+
+ /* reinitialize adapter, this calls reset and start */
+ hw->nb_rx_queues = dev->data->nb_rx_queues;
+ hw->nb_tx_queues = dev->data->nb_tx_queues;
+ status = ngbe_pf_reset_hw(hw);
+ if (status != 0)
+ return -1;
+ hw->mac.start_hw(hw);
+ hw->mac.get_link_status = true;
+
+ ngbe_dev_phy_intr_setup(dev);
+
+ /* check and configure queue intr-vector mapping */
+ if ((rte_intr_cap_multiple(intr_handle) ||
+ !RTE_ETH_DEV_SRIOV(dev).active) &&
+ dev->data->dev_conf.intr_conf.rxq != 0) {
+ intr_vector = dev->data->nb_rx_queues;
+ if (rte_intr_efd_enable(intr_handle, intr_vector))
+ return -1;
+ }
+
+ if (rte_intr_dp_is_en(intr_handle) && intr_handle->intr_vec == NULL) {
+ intr_handle->intr_vec =
+ rte_zmalloc("intr_vec",
+ dev->data->nb_rx_queues * sizeof(int), 0);
+ if (intr_handle->intr_vec == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %d rx_queues intr_vec",
+ dev->data->nb_rx_queues);
+ return -ENOMEM;
+ }
+ }
+
+ /* confiugre MSI-X for sleep until Rx interrupt */
+ ngbe_configure_msix(dev);
+
+ /* initialize transmission unit */
+ ngbe_dev_tx_init(dev);
+
+ /* This can fail when allocating mbufs for descriptor rings */
+ err = ngbe_dev_rx_init(dev);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR, "Unable to initialize Rx hardware");
+ goto error;
+ }
+
+ err = ngbe_dev_rxtx_start(dev);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "Unable to start rxtx queues");
+ goto error;
+ }
+
+ err = hw->mac.check_link(hw, &speed, &link_up, 0);
+ if (err != 0)
+ goto error;
+ dev->data->dev_link.link_status = link_up;
+
+ link_speeds = &dev->data->dev_conf.link_speeds;
+ if (*link_speeds == ETH_LINK_SPEED_AUTONEG)
+ negotiate = true;
+
+ err = hw->mac.get_link_capabilities(hw, &speed, &negotiate);
+ if (err != 0)
+ goto error;
+
+ allowed_speeds = 0;
+ if (hw->mac.default_speeds & NGBE_LINK_SPEED_1GB_FULL)
+ allowed_speeds |= ETH_LINK_SPEED_1G;
+ if (hw->mac.default_speeds & NGBE_LINK_SPEED_100M_FULL)
+ allowed_speeds |= ETH_LINK_SPEED_100M;
+ if (hw->mac.default_speeds & NGBE_LINK_SPEED_10M_FULL)
+ allowed_speeds |= ETH_LINK_SPEED_10M;
+
+ if (*link_speeds & ~allowed_speeds) {
+ PMD_INIT_LOG(ERR, "Invalid link setting");
+ goto error;
+ }
+
+ speed = 0x0;
+ if (*link_speeds == ETH_LINK_SPEED_AUTONEG) {
+ speed = hw->mac.default_speeds;
+ } else {
+ if (*link_speeds & ETH_LINK_SPEED_1G)
+ speed |= NGBE_LINK_SPEED_1GB_FULL;
+ if (*link_speeds & ETH_LINK_SPEED_100M)
+ speed |= NGBE_LINK_SPEED_100M_FULL;
+ if (*link_speeds & ETH_LINK_SPEED_10M)
+ speed |= NGBE_LINK_SPEED_10M_FULL;
+ }
+
+ hw->phy.init_hw(hw);
+ err = hw->mac.setup_link(hw, speed, link_up);
+ if (err != 0)
+ goto error;
+
+ if (rte_intr_allow_others(intr_handle)) {
+ ngbe_dev_misc_interrupt_setup(dev);
+ /* check if lsc interrupt is enabled */
+ if (dev->data->dev_conf.intr_conf.lsc != 0)
+ ngbe_dev_lsc_interrupt_setup(dev, TRUE);
+ else
+ ngbe_dev_lsc_interrupt_setup(dev, FALSE);
+ ngbe_dev_macsec_interrupt_setup(dev);
+ ngbe_set_ivar_map(hw, -1, 1, NGBE_MISC_VEC_ID);
+ } else {
+ rte_intr_callback_unregister(intr_handle,
+ ngbe_dev_interrupt_handler, dev);
+ if (dev->data->dev_conf.intr_conf.lsc != 0)
+ PMD_INIT_LOG(INFO,
+ "LSC won't enable because of no intr multiplex");
+ }
+
+ /* check if rxq interrupt is enabled */
+ if (dev->data->dev_conf.intr_conf.rxq != 0 &&
+ rte_intr_dp_is_en(intr_handle))
+ ngbe_dev_rxq_interrupt_setup(dev);
+
+ /* enable UIO/VFIO intr/eventfd mapping */
+ rte_intr_enable(intr_handle);
+
+ /* resume enabled intr since HW reset */
+ ngbe_enable_intr(dev);
+
+ if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
+ (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ /* gpio0 is used to power on/off control*/
+ wr32(hw, NGBE_GPIODATA, 0);
+ }
+
+ /*
+ * Update link status right before return, because it may
+ * start link configuration process in a separate thread.
+ */
+ ngbe_dev_link_update(dev, 0);
+
+ return 0;
+
+error:
+ PMD_INIT_LOG(ERR, "failure in dev start: %d", err);
+ ngbe_dev_clear_queues(dev);
+ return -EIO;
+}
+
+/*
+ * Stop device: disable rx and tx functions to allow for reconfiguring.
+ */
+static int
+ngbe_dev_stop(struct rte_eth_dev *dev)
+{
+ struct rte_eth_link link;
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+
+ if (hw->adapter_stopped)
+ return 0;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
+ (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ /* gpio0 is used to power on/off control*/
+ wr32(hw, NGBE_GPIODATA, NGBE_GPIOBIT_0);
+ }
+
+ /* disable interrupts */
+ ngbe_disable_intr(hw);
+
+ /* reset the NIC */
+ ngbe_pf_reset_hw(hw);
+ hw->adapter_stopped = 0;
+
+ /* stop adapter */
+ ngbe_stop_hw(hw);
+
+ ngbe_dev_clear_queues(dev);
+
+ /* Clear recorded link status */
+ memset(&link, 0, sizeof(link));
+ rte_eth_linkstatus_set(dev, &link);
+
+ if (!rte_intr_allow_others(intr_handle))
+ /* resume to the default handler */
+ rte_intr_callback_register(intr_handle,
+ ngbe_dev_interrupt_handler,
+ (void *)dev);
+
+ /* Clean datapath event and queue/vec mapping */
+ rte_intr_efd_disable(intr_handle);
+ if (intr_handle->intr_vec != NULL) {
+ rte_free(intr_handle->intr_vec);
+ intr_handle->intr_vec = NULL;
+ }
+
+ hw->adapter_stopped = true;
+ dev->data->dev_started = 0;
+
+ return 0;
+}
+
/*
* Reset and stop device.
*/
@@ -414,6 +691,106 @@ ngbe_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
return ngbe_dev_link_update_share(dev, wait_to_complete);
}
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ * @param on
+ * Enable or Disable.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev, uint8_t on)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ ngbe_dev_link_status_print(dev);
+ if (on != 0) {
+ intr->mask_misc |= NGBE_ICRMISC_PHY;
+ intr->mask_misc |= NGBE_ICRMISC_GPIO;
+ } else {
+ intr->mask_misc &= ~NGBE_ICRMISC_PHY;
+ intr->mask_misc &= ~NGBE_ICRMISC_GPIO;
+ }
+
+ return 0;
+}
+
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_misc_interrupt_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ u64 mask;
+
+ mask = NGBE_ICR_MASK;
+ mask &= (1ULL << NGBE_MISC_VEC_ID);
+ intr->mask |= mask;
+ intr->mask_misc |= NGBE_ICRMISC_GPIO;
+
+ return 0;
+}
+
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ u64 mask;
+
+ mask = NGBE_ICR_MASK;
+ mask &= ~((1ULL << NGBE_RX_VEC_START) - 1);
+ intr->mask |= mask;
+
+ return 0;
+}
+
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_macsec_interrupt_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ intr->mask_misc |= NGBE_ICRMISC_LNKSEC;
+
+ return 0;
+}
+
/*
* It reads ICR and sets flag for the link_update.
*
@@ -614,9 +991,103 @@ ngbe_dev_interrupt_handler(void *param)
ngbe_dev_interrupt_action(dev);
}
+/**
+ * Set the IVAR registers, mapping interrupt causes to vectors
+ * @param hw
+ * pointer to ngbe_hw struct
+ * @direction
+ * 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue
+ * queue to map the corresponding interrupt to
+ * @msix_vector
+ * the vector to map to the corresponding queue
+ */
+void
+ngbe_set_ivar_map(struct ngbe_hw *hw, int8_t direction,
+ uint8_t queue, uint8_t msix_vector)
+{
+ uint32_t tmp, idx;
+
+ if (direction == -1) {
+ /* other causes */
+ msix_vector |= NGBE_IVARMISC_VLD;
+ idx = 0;
+ tmp = rd32(hw, NGBE_IVARMISC);
+ tmp &= ~(0xFF << idx);
+ tmp |= (msix_vector << idx);
+ wr32(hw, NGBE_IVARMISC, tmp);
+ } else {
+ /* rx or tx causes */
+ /* Workround for ICR lost */
+ idx = ((16 * (queue & 1)) + (8 * direction));
+ tmp = rd32(hw, NGBE_IVAR(queue >> 1));
+ tmp &= ~(0xFF << idx);
+ tmp |= (msix_vector << idx);
+ wr32(hw, NGBE_IVAR(queue >> 1), tmp);
+ }
+}
+
+/**
+ * Sets up the hardware to properly generate MSI-X interrupts
+ * @hw
+ * board private structure
+ */
+static void
+ngbe_configure_msix(struct rte_eth_dev *dev)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ uint32_t queue_id, base = NGBE_MISC_VEC_ID;
+ uint32_t vec = NGBE_MISC_VEC_ID;
+ uint32_t gpie;
+
+ /*
+ * Won't configure MSI-X register if no mapping is done
+ * between intr vector and event fd
+ * but if MSI-X has been enabled already, need to configure
+ * auto clean, auto mask and throttling.
+ */
+ gpie = rd32(hw, NGBE_GPIE);
+ if (!rte_intr_dp_is_en(intr_handle) &&
+ !(gpie & NGBE_GPIE_MSIX))
+ return;
+
+ if (rte_intr_allow_others(intr_handle)) {
+ base = NGBE_RX_VEC_START;
+ vec = base;
+ }
+
+ /* setup GPIE for MSI-X mode */
+ gpie = rd32(hw, NGBE_GPIE);
+ gpie |= NGBE_GPIE_MSIX;
+ wr32(hw, NGBE_GPIE, gpie);
+
+ /* Populate the IVAR table and set the ITR values to the
+ * corresponding register.
+ */
+ if (rte_intr_dp_is_en(intr_handle)) {
+ for (queue_id = 0; queue_id < dev->data->nb_rx_queues;
+ queue_id++) {
+ /* by default, 1:1 mapping */
+ ngbe_set_ivar_map(hw, 0, queue_id, vec);
+ intr_handle->intr_vec[queue_id] = vec;
+ if (vec < base + intr_handle->nb_efd - 1)
+ vec++;
+ }
+
+ ngbe_set_ivar_map(hw, -1, 1, NGBE_MISC_VEC_ID);
+ }
+ wr32(hw, NGBE_ITR(NGBE_MISC_VEC_ID),
+ NGBE_ITR_IVAL_1G(NGBE_QUEUE_ITR_INTERVAL_DEFAULT)
+ | NGBE_ITR_WRDSA);
+}
+
static const struct eth_dev_ops ngbe_eth_dev_ops = {
.dev_configure = ngbe_dev_configure,
.dev_infos_get = ngbe_dev_info_get,
+ .dev_start = ngbe_dev_start,
+ .dev_stop = ngbe_dev_stop,
.link_update = ngbe_dev_link_update,
.rx_queue_setup = ngbe_dev_rx_queue_setup,
.rx_queue_release = ngbe_dev_rx_queue_release,
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 91e5d80665..55c8a3c022 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -13,7 +13,10 @@
#define NGBE_FLAG_MACSEC (uint32_t)(1 << 3)
#define NGBE_FLAG_NEED_LINK_CONFIG (uint32_t)(1 << 4)
+#define NGBE_QUEUE_ITR_INTERVAL_DEFAULT 500 /* 500us */
+
#define NGBE_MISC_VEC_ID RTE_INTR_VEC_ZERO_OFFSET
+#define NGBE_RX_VEC_START RTE_INTR_VEC_RXTX_OFFSET
/* structure for interrupt relative data */
struct ngbe_interrupt {
@@ -59,6 +62,11 @@ ngbe_dev_intr(struct rte_eth_dev *dev)
return intr;
}
+/*
+ * Rx/Tx function prototypes
+ */
+void ngbe_dev_clear_queues(struct rte_eth_dev *dev);
+
void ngbe_dev_rx_queue_release(void *rxq);
void ngbe_dev_tx_queue_release(void *txq);
@@ -72,6 +80,15 @@ int ngbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
uint16_t nb_tx_desc, unsigned int socket_id,
const struct rte_eth_txconf *tx_conf);
+int ngbe_dev_rx_init(struct rte_eth_dev *dev);
+
+void ngbe_dev_tx_init(struct rte_eth_dev *dev);
+
+int ngbe_dev_rxtx_start(struct rte_eth_dev *dev);
+
+void ngbe_set_ivar_map(struct ngbe_hw *hw, int8_t direction,
+ uint8_t queue, uint8_t msix_vector);
+
int
ngbe_dev_link_update_share(struct rte_eth_dev *dev,
int wait_to_complete);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 5187f28e3b..84350075e8 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -482,3 +482,62 @@ ngbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
return 0;
}
+void __rte_cold
+ngbe_dev_clear_queues(struct rte_eth_dev *dev)
+{
+ unsigned int i;
+ struct ngbe_adapter *adapter = ngbe_dev_adapter(dev);
+
+ PMD_INIT_FUNC_TRACE();
+
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ struct ngbe_tx_queue *txq = dev->data->tx_queues[i];
+
+ if (txq != NULL) {
+ txq->ops->release_mbufs(txq);
+ txq->ops->reset(txq);
+ }
+ }
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ struct ngbe_rx_queue *rxq = dev->data->rx_queues[i];
+
+ if (rxq != NULL) {
+ ngbe_rx_queue_release_mbufs(rxq);
+ ngbe_reset_rx_queue(adapter, rxq);
+ }
+ }
+}
+
+/*
+ * Initializes Receive Unit.
+ */
+int __rte_cold
+ngbe_dev_rx_init(struct rte_eth_dev *dev)
+{
+ RTE_SET_USED(dev);
+
+ return -EINVAL;
+}
+
+/*
+ * Initializes Transmit Unit.
+ */
+void __rte_cold
+ngbe_dev_tx_init(struct rte_eth_dev *dev)
+{
+ RTE_SET_USED(dev);
+
+}
+
+/*
+ * Start Transmit and Receive Units.
+ */
+int __rte_cold
+ngbe_dev_rxtx_start(struct rte_eth_dev *dev)
+{
+ RTE_SET_USED(dev);
+
+ return -EINVAL;
+}
+
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 15/19] net/ngbe: add Tx queue start and stop
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (13 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 16/19] net/ngbe: add Rx " Jiawen Wu
` (4 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Initializes transmit unit, support to start and stop transmit unit for
specified queues.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/features/ngbe.ini | 1 +
drivers/net/ngbe/base/ngbe_type.h | 1 +
drivers/net/ngbe/ngbe_ethdev.c | 3 +
drivers/net/ngbe/ngbe_ethdev.h | 7 ++
drivers/net/ngbe/ngbe_rxtx.c | 161 +++++++++++++++++++++++++++++-
drivers/net/ngbe/ngbe_rxtx.h | 3 +
6 files changed, 174 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
index 291a542a42..08d5f1b0dc 100644
--- a/doc/guides/nics/features/ngbe.ini
+++ b/doc/guides/nics/features/ngbe.ini
@@ -7,6 +7,7 @@
Speed capabilities = Y
Link status = Y
Link status event = Y
+Queue start/stop = Y
Multiprocess aware = Y
Linux = Y
ARMv8 = Y
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 3f6698be15..2846a6a2b6 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -190,6 +190,7 @@ struct ngbe_hw {
u16 nb_rx_queues;
u16 nb_tx_queues;
+ u32 q_tx_regs[8 * 4];
bool is_pf;
};
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index f88e71b855..f1911bdcbc 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -598,6 +598,7 @@ ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
ETH_LINK_SPEED_10M;
/* Driver-preferred Rx/Tx parameters */
+ dev_info->default_txportconf.burst_size = 32;
dev_info->default_rxportconf.nb_queues = 1;
dev_info->default_txportconf.nb_queues = 1;
dev_info->default_rxportconf.ring_size = 256;
@@ -1089,6 +1090,8 @@ static const struct eth_dev_ops ngbe_eth_dev_ops = {
.dev_start = ngbe_dev_start,
.dev_stop = ngbe_dev_stop,
.link_update = ngbe_dev_link_update,
+ .tx_queue_start = ngbe_dev_tx_queue_start,
+ .tx_queue_stop = ngbe_dev_tx_queue_stop,
.rx_queue_setup = ngbe_dev_rx_queue_setup,
.rx_queue_release = ngbe_dev_rx_queue_release,
.tx_queue_setup = ngbe_dev_tx_queue_setup,
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 55c8a3c022..f631d847ad 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -86,6 +86,13 @@ void ngbe_dev_tx_init(struct rte_eth_dev *dev);
int ngbe_dev_rxtx_start(struct rte_eth_dev *dev);
+void ngbe_dev_save_tx_queue(struct ngbe_hw *hw, uint16_t tx_queue_id);
+void ngbe_dev_store_tx_queue(struct ngbe_hw *hw, uint16_t tx_queue_id);
+
+int ngbe_dev_tx_queue_start(struct rte_eth_dev *dev, uint16_t tx_queue_id);
+
+int ngbe_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id);
+
void ngbe_set_ivar_map(struct ngbe_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 84350075e8..54ae1802eb 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -526,8 +526,32 @@ ngbe_dev_rx_init(struct rte_eth_dev *dev)
void __rte_cold
ngbe_dev_tx_init(struct rte_eth_dev *dev)
{
- RTE_SET_USED(dev);
+ struct ngbe_hw *hw;
+ struct ngbe_tx_queue *txq;
+ uint64_t bus_addr;
+ uint16_t i;
+
+ PMD_INIT_FUNC_TRACE();
+ hw = ngbe_dev_hw(dev);
+ wr32m(hw, NGBE_SECTXCTL, NGBE_SECTXCTL_ODSA, NGBE_SECTXCTL_ODSA);
+ wr32m(hw, NGBE_SECTXCTL, NGBE_SECTXCTL_XDSA, 0);
+
+ /* Setup the Base and Length of the Tx Descriptor Rings */
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ txq = dev->data->tx_queues[i];
+
+ bus_addr = txq->tx_ring_phys_addr;
+ wr32(hw, NGBE_TXBAL(txq->reg_idx),
+ (uint32_t)(bus_addr & BIT_MASK32));
+ wr32(hw, NGBE_TXBAH(txq->reg_idx),
+ (uint32_t)(bus_addr >> 32));
+ wr32m(hw, NGBE_TXCFG(txq->reg_idx), NGBE_TXCFG_BUFLEN_MASK,
+ NGBE_TXCFG_BUFLEN(txq->nb_tx_desc));
+ /* Setup the HW Tx Head and TX Tail descriptor pointers */
+ wr32(hw, NGBE_TXRP(txq->reg_idx), 0);
+ wr32(hw, NGBE_TXWP(txq->reg_idx), 0);
+ }
}
/*
@@ -536,8 +560,141 @@ ngbe_dev_tx_init(struct rte_eth_dev *dev)
int __rte_cold
ngbe_dev_rxtx_start(struct rte_eth_dev *dev)
{
- RTE_SET_USED(dev);
+ struct ngbe_hw *hw;
+ struct ngbe_tx_queue *txq;
+ uint32_t dmatxctl;
+ uint16_t i;
+ int ret = 0;
+
+ PMD_INIT_FUNC_TRACE();
+ hw = ngbe_dev_hw(dev);
+
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ txq = dev->data->tx_queues[i];
+ /* Setup Transmit Threshold Registers */
+ wr32m(hw, NGBE_TXCFG(txq->reg_idx),
+ NGBE_TXCFG_HTHRESH_MASK |
+ NGBE_TXCFG_WTHRESH_MASK,
+ NGBE_TXCFG_HTHRESH(txq->hthresh) |
+ NGBE_TXCFG_WTHRESH(txq->wthresh));
+ }
+
+ dmatxctl = rd32(hw, NGBE_DMATXCTRL);
+ dmatxctl |= NGBE_DMATXCTRL_ENA;
+ wr32(hw, NGBE_DMATXCTRL, dmatxctl);
+
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ txq = dev->data->tx_queues[i];
+ if (txq->tx_deferred_start == 0) {
+ ret = ngbe_dev_tx_queue_start(dev, i);
+ if (ret < 0)
+ return ret;
+ }
+ }
return -EINVAL;
}
+void
+ngbe_dev_save_tx_queue(struct ngbe_hw *hw, uint16_t tx_queue_id)
+{
+ u32 *reg = &hw->q_tx_regs[tx_queue_id * 8];
+ *(reg++) = rd32(hw, NGBE_TXBAL(tx_queue_id));
+ *(reg++) = rd32(hw, NGBE_TXBAH(tx_queue_id));
+ *(reg++) = rd32(hw, NGBE_TXCFG(tx_queue_id));
+}
+
+void
+ngbe_dev_store_tx_queue(struct ngbe_hw *hw, uint16_t tx_queue_id)
+{
+ u32 *reg = &hw->q_tx_regs[tx_queue_id * 8];
+ wr32(hw, NGBE_TXBAL(tx_queue_id), *(reg++));
+ wr32(hw, NGBE_TXBAH(tx_queue_id), *(reg++));
+ wr32(hw, NGBE_TXCFG(tx_queue_id), *(reg++) & ~NGBE_TXCFG_ENA);
+}
+
+/*
+ * Start Transmit Units for specified queue.
+ */
+int __rte_cold
+ngbe_dev_tx_queue_start(struct rte_eth_dev *dev, uint16_t tx_queue_id)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_tx_queue *txq;
+ uint32_t txdctl;
+ int poll_ms;
+
+ PMD_INIT_FUNC_TRACE();
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ wr32m(hw, NGBE_TXCFG(txq->reg_idx), NGBE_TXCFG_ENA, NGBE_TXCFG_ENA);
+
+ /* Wait until Tx Enable ready */
+ poll_ms = RTE_NGBE_REGISTER_POLL_WAIT_10_MS;
+ do {
+ rte_delay_ms(1);
+ txdctl = rd32(hw, NGBE_TXCFG(txq->reg_idx));
+ } while (--poll_ms && !(txdctl & NGBE_TXCFG_ENA));
+ if (poll_ms == 0)
+ PMD_INIT_LOG(ERR, "Could not enable Tx Queue %d",
+ tx_queue_id);
+
+ rte_wmb();
+ wr32(hw, NGBE_TXWP(txq->reg_idx), txq->tx_tail);
+ dev->data->tx_queue_state[tx_queue_id] = RTE_ETH_QUEUE_STATE_STARTED;
+
+ return 0;
+}
+
+/*
+ * Stop Transmit Units for specified queue.
+ */
+int __rte_cold
+ngbe_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_tx_queue *txq;
+ uint32_t txdctl;
+ uint32_t txtdh, txtdt;
+ int poll_ms;
+
+ PMD_INIT_FUNC_TRACE();
+
+ txq = dev->data->tx_queues[tx_queue_id];
+
+ /* Wait until Tx queue is empty */
+ poll_ms = RTE_NGBE_REGISTER_POLL_WAIT_10_MS;
+ do {
+ rte_delay_us(RTE_NGBE_WAIT_100_US);
+ txtdh = rd32(hw, NGBE_TXRP(txq->reg_idx));
+ txtdt = rd32(hw, NGBE_TXWP(txq->reg_idx));
+ } while (--poll_ms && (txtdh != txtdt));
+ if (poll_ms == 0)
+ PMD_INIT_LOG(ERR, "Tx Queue %d is not empty when stopping.",
+ tx_queue_id);
+
+ ngbe_dev_save_tx_queue(hw, txq->reg_idx);
+ wr32m(hw, NGBE_TXCFG(txq->reg_idx), NGBE_TXCFG_ENA, 0);
+
+ /* Wait until Tx Enable bit clear */
+ poll_ms = RTE_NGBE_REGISTER_POLL_WAIT_10_MS;
+ do {
+ rte_delay_ms(1);
+ txdctl = rd32(hw, NGBE_TXCFG(txq->reg_idx));
+ } while (--poll_ms && (txdctl & NGBE_TXCFG_ENA));
+ if (poll_ms == 0)
+ PMD_INIT_LOG(ERR, "Could not disable Tx Queue %d",
+ tx_queue_id);
+
+ rte_delay_us(RTE_NGBE_WAIT_100_US);
+ ngbe_dev_store_tx_queue(hw, txq->reg_idx);
+
+ if (txq->ops != NULL) {
+ txq->ops->release_mbufs(txq);
+ txq->ops->reset(txq);
+ }
+ dev->data->tx_queue_state[tx_queue_id] = RTE_ETH_QUEUE_STATE_STOPPED;
+
+ return 0;
+}
+
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
index 3b567b767b..58487caa95 100644
--- a/drivers/net/ngbe/ngbe_rxtx.h
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -73,6 +73,9 @@ struct ngbe_tx_desc {
#define RX_RING_SZ ((NGBE_RING_DESC_MAX + RTE_PMD_NGBE_RX_MAX_BURST) * \
sizeof(struct ngbe_rx_desc))
+#define RTE_NGBE_REGISTER_POLL_WAIT_10_MS 10
+#define RTE_NGBE_WAIT_100_US 100
+
#define NGBE_TX_MAX_SEG 40
#ifndef DEFAULT_TX_FREE_THRESH
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 16/19] net/ngbe: add Rx queue start and stop
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (14 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 15/19] net/ngbe: add Tx queue start and stop Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 17/19] net/ngbe: add simple Rx flow Jiawen Wu
` (3 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Initializes receive unit, support to start and stop receive unit for
specified queues.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_dummy.h | 15 ++
drivers/net/ngbe/base/ngbe_hw.c | 105 ++++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 4 +
drivers/net/ngbe/base/ngbe_type.h | 4 +
drivers/net/ngbe/ngbe_ethdev.c | 5 +
drivers/net/ngbe/ngbe_ethdev.h | 6 +
drivers/net/ngbe/ngbe_rxtx.c | 215 ++++++++++++++++++++++++++++-
drivers/net/ngbe/ngbe_rxtx.h | 8 ++
8 files changed, 359 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 387bb16aec..8863acef0d 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -59,6 +59,18 @@ static inline s32 ngbe_mac_get_mac_addr_dummy(struct ngbe_hw *TUP0, u8 *TUP1)
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_mac_enable_rx_dma_dummy(struct ngbe_hw *TUP0, u32 TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_disable_sec_rx_path_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
+static inline s32 ngbe_mac_enable_sec_rx_path_dummy(struct ngbe_hw *TUP0)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
static inline s32 ngbe_mac_acquire_swfw_sync_dummy(struct ngbe_hw *TUP0,
u32 TUP1)
{
@@ -167,6 +179,9 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.start_hw = ngbe_mac_start_hw_dummy;
hw->mac.stop_hw = ngbe_mac_stop_hw_dummy;
hw->mac.get_mac_addr = ngbe_mac_get_mac_addr_dummy;
+ hw->mac.enable_rx_dma = ngbe_mac_enable_rx_dma_dummy;
+ hw->mac.disable_sec_rx_path = ngbe_mac_disable_sec_rx_path_dummy;
+ hw->mac.enable_sec_rx_path = ngbe_mac_enable_sec_rx_path_dummy;
hw->mac.acquire_swfw_sync = ngbe_mac_acquire_swfw_sync_dummy;
hw->mac.release_swfw_sync = ngbe_mac_release_swfw_sync_dummy;
hw->mac.setup_link = ngbe_mac_setup_link_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 87c02a8f1f..6b575fc67b 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -536,6 +536,63 @@ void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask)
ngbe_release_eeprom_semaphore(hw);
}
+/**
+ * ngbe_disable_sec_rx_path - Stops the receive data path
+ * @hw: pointer to hardware structure
+ *
+ * Stops the receive data path and waits for the HW to internally empty
+ * the Rx security block
+ **/
+s32 ngbe_disable_sec_rx_path(struct ngbe_hw *hw)
+{
+#define NGBE_MAX_SECRX_POLL 4000
+
+ int i;
+ u32 secrxreg;
+
+ DEBUGFUNC("ngbe_disable_sec_rx_path");
+
+
+ secrxreg = rd32(hw, NGBE_SECRXCTL);
+ secrxreg |= NGBE_SECRXCTL_XDSA;
+ wr32(hw, NGBE_SECRXCTL, secrxreg);
+ for (i = 0; i < NGBE_MAX_SECRX_POLL; i++) {
+ secrxreg = rd32(hw, NGBE_SECRXSTAT);
+ if (!(secrxreg & NGBE_SECRXSTAT_RDY))
+ /* Use interrupt-safe sleep just in case */
+ usec_delay(10);
+ else
+ break;
+ }
+
+ /* For informational purposes only */
+ if (i >= NGBE_MAX_SECRX_POLL)
+ DEBUGOUT("Rx unit being enabled before security "
+ "path fully disabled. Continuing with init.\n");
+
+ return 0;
+}
+
+/**
+ * ngbe_enable_sec_rx_path - Enables the receive data path
+ * @hw: pointer to hardware structure
+ *
+ * Enables the receive data path.
+ **/
+s32 ngbe_enable_sec_rx_path(struct ngbe_hw *hw)
+{
+ u32 secrxreg;
+
+ DEBUGFUNC("ngbe_enable_sec_rx_path");
+
+ secrxreg = rd32(hw, NGBE_SECRXCTL);
+ secrxreg &= ~NGBE_SECRXCTL_XDSA;
+ wr32(hw, NGBE_SECRXCTL, secrxreg);
+ ngbe_flush(hw);
+
+ return 0;
+}
+
/**
* ngbe_clear_vmdq - Disassociate a VMDq pool index from a rx address
* @hw: pointer to hardware struct
@@ -756,6 +813,21 @@ void ngbe_disable_rx(struct ngbe_hw *hw)
wr32m(hw, NGBE_MACRXCFG, NGBE_MACRXCFG_ENA, 0);
}
+void ngbe_enable_rx(struct ngbe_hw *hw)
+{
+ u32 pfdtxgswc;
+
+ wr32m(hw, NGBE_MACRXCFG, NGBE_MACRXCFG_ENA, NGBE_MACRXCFG_ENA);
+ wr32m(hw, NGBE_PBRXCTL, NGBE_PBRXCTL_ENA, NGBE_PBRXCTL_ENA);
+
+ if (hw->mac.set_lben) {
+ pfdtxgswc = rd32(hw, NGBE_PSRCTL);
+ pfdtxgswc |= NGBE_PSRCTL_LBENA;
+ wr32(hw, NGBE_PSRCTL, pfdtxgswc);
+ hw->mac.set_lben = false;
+ }
+}
+
/**
* ngbe_set_mac_type - Sets MAC type
* @hw: pointer to the HW structure
@@ -802,6 +874,36 @@ s32 ngbe_set_mac_type(struct ngbe_hw *hw)
return err;
}
+/**
+ * ngbe_enable_rx_dma - Enable the Rx DMA unit
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit
+ **/
+s32 ngbe_enable_rx_dma(struct ngbe_hw *hw, u32 regval)
+{
+ DEBUGFUNC("ngbe_enable_rx_dma");
+
+ /*
+ * Workaround silicon errata when enabling the Rx datapath.
+ * If traffic is incoming before we enable the Rx unit, it could hang
+ * the Rx DMA unit. Therefore, make sure the security engine is
+ * completely disabled prior to enabling the Rx unit.
+ */
+
+ hw->mac.disable_sec_rx_path(hw);
+
+ if (regval & NGBE_PBRXCTL_ENA)
+ ngbe_enable_rx(hw);
+ else
+ ngbe_disable_rx(hw);
+
+ hw->mac.enable_sec_rx_path(hw);
+
+ return 0;
+}
+
void ngbe_map_device_id(struct ngbe_hw *hw)
{
u16 oem = hw->sub_system_id & NGBE_OEM_MASK;
@@ -886,11 +988,14 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
mac->init_hw = ngbe_init_hw;
mac->reset_hw = ngbe_reset_hw_em;
mac->start_hw = ngbe_start_hw;
+ mac->enable_rx_dma = ngbe_enable_rx_dma;
mac->get_mac_addr = ngbe_get_mac_addr;
mac->stop_hw = ngbe_stop_hw;
mac->acquire_swfw_sync = ngbe_acquire_swfw_sync;
mac->release_swfw_sync = ngbe_release_swfw_sync;
+ mac->disable_sec_rx_path = ngbe_disable_sec_rx_path;
+ mac->enable_sec_rx_path = ngbe_enable_sec_rx_path;
/* RAR */
mac->set_rar = ngbe_set_rar;
mac->clear_rar = ngbe_clear_rar;
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index 791d15fbec..17a0a03c88 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -34,6 +34,8 @@ s32 ngbe_set_rar(struct ngbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
s32 ngbe_clear_rar(struct ngbe_hw *hw, u32 index);
s32 ngbe_init_rx_addrs(struct ngbe_hw *hw);
+s32 ngbe_disable_sec_rx_path(struct ngbe_hw *hw);
+s32 ngbe_enable_sec_rx_path(struct ngbe_hw *hw);
s32 ngbe_validate_mac_addr(u8 *mac_addr);
s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
@@ -46,10 +48,12 @@ s32 ngbe_init_uta_tables(struct ngbe_hw *hw);
s32 ngbe_init_thermal_sensor_thresh(struct ngbe_hw *hw);
s32 ngbe_mac_check_overtemp(struct ngbe_hw *hw);
void ngbe_disable_rx(struct ngbe_hw *hw);
+void ngbe_enable_rx(struct ngbe_hw *hw);
s32 ngbe_init_shared_code(struct ngbe_hw *hw);
s32 ngbe_set_mac_type(struct ngbe_hw *hw);
s32 ngbe_init_ops_pf(struct ngbe_hw *hw);
s32 ngbe_init_phy(struct ngbe_hw *hw);
+s32 ngbe_enable_rx_dma(struct ngbe_hw *hw, u32 regval);
void ngbe_map_device_id(struct ngbe_hw *hw);
#endif /* _NGBE_HW_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 2846a6a2b6..28540e4ba0 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -97,6 +97,9 @@ struct ngbe_mac_info {
s32 (*start_hw)(struct ngbe_hw *hw);
s32 (*stop_hw)(struct ngbe_hw *hw);
s32 (*get_mac_addr)(struct ngbe_hw *hw, u8 *mac_addr);
+ s32 (*enable_rx_dma)(struct ngbe_hw *hw, u32 regval);
+ s32 (*disable_sec_rx_path)(struct ngbe_hw *hw);
+ s32 (*enable_sec_rx_path)(struct ngbe_hw *hw);
s32 (*acquire_swfw_sync)(struct ngbe_hw *hw, u32 mask);
void (*release_swfw_sync)(struct ngbe_hw *hw, u32 mask);
@@ -190,6 +193,7 @@ struct ngbe_hw {
u16 nb_rx_queues;
u16 nb_tx_queues;
+ u32 q_rx_regs[8 * 4];
u32 q_tx_regs[8 * 4];
bool is_pf;
};
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index f1911bdcbc..2a40dbd184 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -569,6 +569,8 @@ ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
dev_info->max_rx_queues = (uint16_t)hw->mac.max_rx_queues;
dev_info->max_tx_queues = (uint16_t)hw->mac.max_tx_queues;
+ dev_info->min_rx_bufsize = 1024;
+ dev_info->max_rx_pktlen = 15872;
dev_info->default_rxconf = (struct rte_eth_rxconf) {
.rx_thresh = {
@@ -598,6 +600,7 @@ ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
ETH_LINK_SPEED_10M;
/* Driver-preferred Rx/Tx parameters */
+ dev_info->default_rxportconf.burst_size = 32;
dev_info->default_txportconf.burst_size = 32;
dev_info->default_rxportconf.nb_queues = 1;
dev_info->default_txportconf.nb_queues = 1;
@@ -1090,6 +1093,8 @@ static const struct eth_dev_ops ngbe_eth_dev_ops = {
.dev_start = ngbe_dev_start,
.dev_stop = ngbe_dev_stop,
.link_update = ngbe_dev_link_update,
+ .rx_queue_start = ngbe_dev_rx_queue_start,
+ .rx_queue_stop = ngbe_dev_rx_queue_stop,
.tx_queue_start = ngbe_dev_tx_queue_start,
.tx_queue_stop = ngbe_dev_tx_queue_stop,
.rx_queue_setup = ngbe_dev_rx_queue_setup,
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index f631d847ad..1d71d28023 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -86,9 +86,15 @@ void ngbe_dev_tx_init(struct rte_eth_dev *dev);
int ngbe_dev_rxtx_start(struct rte_eth_dev *dev);
+void ngbe_dev_save_rx_queue(struct ngbe_hw *hw, uint16_t rx_queue_id);
+void ngbe_dev_store_rx_queue(struct ngbe_hw *hw, uint16_t rx_queue_id);
void ngbe_dev_save_tx_queue(struct ngbe_hw *hw, uint16_t tx_queue_id);
void ngbe_dev_store_tx_queue(struct ngbe_hw *hw, uint16_t tx_queue_id);
+int ngbe_dev_rx_queue_start(struct rte_eth_dev *dev, uint16_t rx_queue_id);
+
+int ngbe_dev_rx_queue_stop(struct rte_eth_dev *dev, uint16_t rx_queue_id);
+
int ngbe_dev_tx_queue_start(struct rte_eth_dev *dev, uint16_t tx_queue_id);
int ngbe_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 54ae1802eb..2622f562c4 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -509,15 +509,111 @@ ngbe_dev_clear_queues(struct rte_eth_dev *dev)
}
}
+static int __rte_cold
+ngbe_alloc_rx_queue_mbufs(struct ngbe_rx_queue *rxq)
+{
+ struct ngbe_rx_entry *rxe = rxq->sw_ring;
+ uint64_t dma_addr;
+ unsigned int i;
+
+ /* Initialize software ring entries */
+ for (i = 0; i < rxq->nb_rx_desc; i++) {
+ /* the ring can also be modified by hardware */
+ volatile struct ngbe_rx_desc *rxd;
+ struct rte_mbuf *mbuf = rte_mbuf_raw_alloc(rxq->mb_pool);
+
+ if (mbuf == NULL) {
+ PMD_INIT_LOG(ERR, "Rx mbuf alloc failed queue_id=%u port_id=%u",
+ (unsigned int)rxq->queue_id,
+ (unsigned int)rxq->port_id);
+ return -ENOMEM;
+ }
+
+ mbuf->data_off = RTE_PKTMBUF_HEADROOM;
+ mbuf->port = rxq->port_id;
+
+ dma_addr =
+ rte_cpu_to_le_64(rte_mbuf_data_iova_default(mbuf));
+ rxd = &rxq->rx_ring[i];
+ NGBE_RXD_HDRADDR(rxd, 0);
+ NGBE_RXD_PKTADDR(rxd, dma_addr);
+ rxe[i].mbuf = mbuf;
+ }
+
+ return 0;
+}
+
/*
* Initializes Receive Unit.
*/
int __rte_cold
ngbe_dev_rx_init(struct rte_eth_dev *dev)
{
- RTE_SET_USED(dev);
+ struct ngbe_hw *hw;
+ struct ngbe_rx_queue *rxq;
+ uint64_t bus_addr;
+ uint32_t fctrl;
+ uint32_t hlreg0;
+ uint32_t srrctl;
+ uint16_t buf_size;
+ uint16_t i;
+
+ PMD_INIT_FUNC_TRACE();
+ hw = ngbe_dev_hw(dev);
+
+ /*
+ * Make sure receives are disabled while setting
+ * up the Rx context (registers, descriptor rings, etc.).
+ */
+ wr32m(hw, NGBE_MACRXCFG, NGBE_MACRXCFG_ENA, 0);
+ wr32m(hw, NGBE_PBRXCTL, NGBE_PBRXCTL_ENA, 0);
+
+ /* Enable receipt of broadcasted frames */
+ fctrl = rd32(hw, NGBE_PSRCTL);
+ fctrl |= NGBE_PSRCTL_BCA;
+ wr32(hw, NGBE_PSRCTL, fctrl);
+
+ hlreg0 = rd32(hw, NGBE_SECRXCTL);
+ hlreg0 &= ~NGBE_SECRXCTL_XDSA;
+ wr32(hw, NGBE_SECRXCTL, hlreg0);
+
+ wr32m(hw, NGBE_FRMSZ, NGBE_FRMSZ_MAX_MASK,
+ NGBE_FRMSZ_MAX(NGBE_FRAME_SIZE_DFT));
- return -EINVAL;
+ /* Setup Rx queues */
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ rxq = dev->data->rx_queues[i];
+
+ /* Setup the Base and Length of the Rx Descriptor Rings */
+ bus_addr = rxq->rx_ring_phys_addr;
+ wr32(hw, NGBE_RXBAL(rxq->reg_idx),
+ (uint32_t)(bus_addr & BIT_MASK32));
+ wr32(hw, NGBE_RXBAH(rxq->reg_idx),
+ (uint32_t)(bus_addr >> 32));
+ wr32(hw, NGBE_RXRP(rxq->reg_idx), 0);
+ wr32(hw, NGBE_RXWP(rxq->reg_idx), 0);
+
+ srrctl = NGBE_RXCFG_RNGLEN(rxq->nb_rx_desc);
+
+ /* Set if packets are dropped when no descriptors available */
+ if (rxq->drop_en)
+ srrctl |= NGBE_RXCFG_DROP;
+
+ /*
+ * Configure the Rx buffer size in the PKTLEN field of
+ * the RXCFG register of the queue.
+ * The value is in 1 KB resolution. Valid values can be from
+ * 1 KB to 16 KB.
+ */
+ buf_size = (uint16_t)(rte_pktmbuf_data_room_size(rxq->mb_pool) -
+ RTE_PKTMBUF_HEADROOM);
+ buf_size = ROUND_DOWN(buf_size, 0x1 << 10);
+ srrctl |= NGBE_RXCFG_PKTLEN(buf_size);
+
+ wr32(hw, NGBE_RXCFG(rxq->reg_idx), srrctl);
+ }
+
+ return 0;
}
/*
@@ -562,7 +658,9 @@ ngbe_dev_rxtx_start(struct rte_eth_dev *dev)
{
struct ngbe_hw *hw;
struct ngbe_tx_queue *txq;
+ struct ngbe_rx_queue *rxq;
uint32_t dmatxctl;
+ uint32_t rxctrl;
uint16_t i;
int ret = 0;
@@ -592,7 +690,39 @@ ngbe_dev_rxtx_start(struct rte_eth_dev *dev)
}
}
- return -EINVAL;
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ rxq = dev->data->rx_queues[i];
+ if (rxq->rx_deferred_start == 0) {
+ ret = ngbe_dev_rx_queue_start(dev, i);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ /* Enable Receive engine */
+ rxctrl = rd32(hw, NGBE_PBRXCTL);
+ rxctrl |= NGBE_PBRXCTL_ENA;
+ hw->mac.enable_rx_dma(hw, rxctrl);
+
+ return 0;
+}
+
+void
+ngbe_dev_save_rx_queue(struct ngbe_hw *hw, uint16_t rx_queue_id)
+{
+ u32 *reg = &hw->q_rx_regs[rx_queue_id * 8];
+ *(reg++) = rd32(hw, NGBE_RXBAL(rx_queue_id));
+ *(reg++) = rd32(hw, NGBE_RXBAH(rx_queue_id));
+ *(reg++) = rd32(hw, NGBE_RXCFG(rx_queue_id));
+}
+
+void
+ngbe_dev_store_rx_queue(struct ngbe_hw *hw, uint16_t rx_queue_id)
+{
+ u32 *reg = &hw->q_rx_regs[rx_queue_id * 8];
+ wr32(hw, NGBE_RXBAL(rx_queue_id), *(reg++));
+ wr32(hw, NGBE_RXBAH(rx_queue_id), *(reg++));
+ wr32(hw, NGBE_RXCFG(rx_queue_id), *(reg++) & ~NGBE_RXCFG_ENA);
}
void
@@ -613,6 +743,85 @@ ngbe_dev_store_tx_queue(struct ngbe_hw *hw, uint16_t tx_queue_id)
wr32(hw, NGBE_TXCFG(tx_queue_id), *(reg++) & ~NGBE_TXCFG_ENA);
}
+/*
+ * Start Receive Units for specified queue.
+ */
+int __rte_cold
+ngbe_dev_rx_queue_start(struct rte_eth_dev *dev, uint16_t rx_queue_id)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_rx_queue *rxq;
+ uint32_t rxdctl;
+ int poll_ms;
+
+ PMD_INIT_FUNC_TRACE();
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+
+ /* Allocate buffers for descriptor rings */
+ if (ngbe_alloc_rx_queue_mbufs(rxq) != 0) {
+ PMD_INIT_LOG(ERR, "Could not alloc mbuf for queue:%d",
+ rx_queue_id);
+ return -1;
+ }
+ rxdctl = rd32(hw, NGBE_RXCFG(rxq->reg_idx));
+ rxdctl |= NGBE_RXCFG_ENA;
+ wr32(hw, NGBE_RXCFG(rxq->reg_idx), rxdctl);
+
+ /* Wait until Rx Enable ready */
+ poll_ms = RTE_NGBE_REGISTER_POLL_WAIT_10_MS;
+ do {
+ rte_delay_ms(1);
+ rxdctl = rd32(hw, NGBE_RXCFG(rxq->reg_idx));
+ } while (--poll_ms && !(rxdctl & NGBE_RXCFG_ENA));
+ if (poll_ms == 0)
+ PMD_INIT_LOG(ERR, "Could not enable Rx Queue %d", rx_queue_id);
+ rte_wmb();
+ wr32(hw, NGBE_RXRP(rxq->reg_idx), 0);
+ wr32(hw, NGBE_RXWP(rxq->reg_idx), rxq->nb_rx_desc - 1);
+ dev->data->rx_queue_state[rx_queue_id] = RTE_ETH_QUEUE_STATE_STARTED;
+
+ return 0;
+}
+
+/*
+ * Stop Receive Units for specified queue.
+ */
+int __rte_cold
+ngbe_dev_rx_queue_stop(struct rte_eth_dev *dev, uint16_t rx_queue_id)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_adapter *adapter = ngbe_dev_adapter(dev);
+ struct ngbe_rx_queue *rxq;
+ uint32_t rxdctl;
+ int poll_ms;
+
+ PMD_INIT_FUNC_TRACE();
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+
+ ngbe_dev_save_rx_queue(hw, rxq->reg_idx);
+ wr32m(hw, NGBE_RXCFG(rxq->reg_idx), NGBE_RXCFG_ENA, 0);
+
+ /* Wait until Rx Enable bit clear */
+ poll_ms = RTE_NGBE_REGISTER_POLL_WAIT_10_MS;
+ do {
+ rte_delay_ms(1);
+ rxdctl = rd32(hw, NGBE_RXCFG(rxq->reg_idx));
+ } while (--poll_ms && (rxdctl & NGBE_RXCFG_ENA));
+ if (poll_ms == 0)
+ PMD_INIT_LOG(ERR, "Could not disable Rx Queue %d", rx_queue_id);
+
+ rte_delay_us(RTE_NGBE_WAIT_100_US);
+ ngbe_dev_store_rx_queue(hw, rxq->reg_idx);
+
+ ngbe_rx_queue_release_mbufs(rxq);
+ ngbe_reset_rx_queue(adapter, rxq);
+ dev->data->rx_queue_state[rx_queue_id] = RTE_ETH_QUEUE_STATE_STOPPED;
+
+ return 0;
+}
+
/*
* Start Transmit Units for specified queue.
*/
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
index 58487caa95..668588fbf8 100644
--- a/drivers/net/ngbe/ngbe_rxtx.h
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -43,6 +43,14 @@ struct ngbe_rx_desc {
} qw1; /* also as r.hdr_addr */
};
+/* @ngbe_rx_desc.qw0 */
+#define NGBE_RXD_PKTADDR(rxd, v) \
+ (((volatile __le64 *)(rxd))[0] = cpu_to_le64(v))
+
+/* @ngbe_rx_desc.qw1 */
+#define NGBE_RXD_HDRADDR(rxd, v) \
+ (((volatile __le64 *)(rxd))[1] = cpu_to_le64(v))
+
/*****************************************************************************
* Transmit Descriptor
*****************************************************************************/
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 17/19] net/ngbe: add simple Rx flow
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (15 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 16/19] net/ngbe: add Rx " Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 18/19] net/ngbe: add simple Tx flow Jiawen Wu
` (2 subsequent siblings)
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Initialize device with the simplest receive function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/ngbe_ethdev.c | 1 +
drivers/net/ngbe/ngbe_ethdev.h | 3 +
drivers/net/ngbe/ngbe_rxtx.c | 169 +++++++++++++++++++++++++++++++++
drivers/net/ngbe/ngbe_rxtx.h | 73 ++++++++++++++
4 files changed, 246 insertions(+)
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 2a40dbd184..e5e2f44454 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -137,6 +137,7 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
PMD_INIT_FUNC_TRACE();
eth_dev->dev_ops = &ngbe_eth_dev_ops;
+ eth_dev->rx_pkt_burst = &ngbe_recv_pkts;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 1d71d28023..ff366d6a5e 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -99,6 +99,9 @@ int ngbe_dev_tx_queue_start(struct rte_eth_dev *dev, uint16_t tx_queue_id);
int ngbe_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id);
+uint16_t ngbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
+
void ngbe_set_ivar_map(struct ngbe_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 2622f562c4..e72c74869a 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -15,6 +15,175 @@
#include "ngbe_ethdev.h"
#include "ngbe_rxtx.h"
+/*
+ * Prefetch a cache line into all cache levels.
+ */
+#define rte_ngbe_prefetch(p) rte_prefetch0(p)
+
+/*********************************************************************
+ *
+ * Rx functions
+ *
+ **********************************************************************/
+uint16_t
+ngbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct ngbe_rx_queue *rxq;
+ volatile struct ngbe_rx_desc *rx_ring;
+ volatile struct ngbe_rx_desc *rxdp;
+ struct ngbe_rx_entry *sw_ring;
+ struct ngbe_rx_entry *rxe;
+ struct rte_mbuf *rxm;
+ struct rte_mbuf *nmb;
+ struct ngbe_rx_desc rxd;
+ uint64_t dma_addr;
+ uint32_t staterr;
+ uint16_t pkt_len;
+ uint16_t rx_id;
+ uint16_t nb_rx;
+ uint16_t nb_hold;
+
+ nb_rx = 0;
+ nb_hold = 0;
+ rxq = rx_queue;
+ rx_id = rxq->rx_tail;
+ rx_ring = rxq->rx_ring;
+ sw_ring = rxq->sw_ring;
+ struct rte_eth_dev *dev = &rte_eth_devices[rxq->port_id];
+ while (nb_rx < nb_pkts) {
+ /*
+ * The order of operations here is important as the DD status
+ * bit must not be read after any other descriptor fields.
+ * rx_ring and rxdp are pointing to volatile data so the order
+ * of accesses cannot be reordered by the compiler. If they were
+ * not volatile, they could be reordered which could lead to
+ * using invalid descriptor fields when read from rxd.
+ */
+ rxdp = &rx_ring[rx_id];
+ staterr = rxdp->qw1.lo.status;
+ if (!(staterr & rte_cpu_to_le_32(NGBE_RXD_STAT_DD)))
+ break;
+ rxd = *rxdp;
+
+ /*
+ * End of packet.
+ *
+ * If the NGBE_RXD_STAT_EOP flag is not set, the Rx packet
+ * is likely to be invalid and to be dropped by the various
+ * validation checks performed by the network stack.
+ *
+ * Allocate a new mbuf to replenish the RX ring descriptor.
+ * If the allocation fails:
+ * - arrange for that Rx descriptor to be the first one
+ * being parsed the next time the receive function is
+ * invoked [on the same queue].
+ *
+ * - Stop parsing the Rx ring and return immediately.
+ *
+ * This policy do not drop the packet received in the Rx
+ * descriptor for which the allocation of a new mbuf failed.
+ * Thus, it allows that packet to be later retrieved if
+ * mbuf have been freed in the mean time.
+ * As a side effect, holding Rx descriptors instead of
+ * systematically giving them back to the NIC may lead to
+ * Rx ring exhaustion situations.
+ * However, the NIC can gracefully prevent such situations
+ * to happen by sending specific "back-pressure" flow control
+ * frames to its peer(s).
+ */
+ PMD_RX_LOG(DEBUG,
+ "port_id=%u queue_id=%u rx_id=%u ext_err_stat=0x%08x pkt_len=%u",
+ (uint16_t)rxq->port_id, (uint16_t)rxq->queue_id,
+ (uint16_t)rx_id, (uint32_t)staterr,
+ (uint16_t)rte_le_to_cpu_16(rxd.qw1.hi.len));
+
+ nmb = rte_mbuf_raw_alloc(rxq->mb_pool);
+ if (nmb == NULL) {
+ PMD_RX_LOG(DEBUG,
+ "Rx mbuf alloc failed port_id=%u queue_id=%u",
+ (uint16_t)rxq->port_id,
+ (uint16_t)rxq->queue_id);
+ dev->data->rx_mbuf_alloc_failed++;
+ break;
+ }
+
+ nb_hold++;
+ rxe = &sw_ring[rx_id];
+ rx_id++;
+ if (rx_id == rxq->nb_rx_desc)
+ rx_id = 0;
+
+ /* Prefetch next mbuf while processing current one. */
+ rte_ngbe_prefetch(sw_ring[rx_id].mbuf);
+
+ /*
+ * When next Rx descriptor is on a cache-line boundary,
+ * prefetch the next 4 Rx descriptors and the next 8 pointers
+ * to mbufs.
+ */
+ if ((rx_id & 0x3) == 0) {
+ rte_ngbe_prefetch(&rx_ring[rx_id]);
+ rte_ngbe_prefetch(&sw_ring[rx_id]);
+ }
+
+ rxm = rxe->mbuf;
+ rxe->mbuf = nmb;
+ dma_addr = rte_cpu_to_le_64(rte_mbuf_data_iova_default(nmb));
+ NGBE_RXD_HDRADDR(rxdp, 0);
+ NGBE_RXD_PKTADDR(rxdp, dma_addr);
+
+ /*
+ * Initialize the returned mbuf.
+ * setup generic mbuf fields:
+ * - number of segments,
+ * - next segment,
+ * - packet length,
+ * - Rx port identifier.
+ */
+ pkt_len = (uint16_t)(rte_le_to_cpu_16(rxd.qw1.hi.len));
+ rxm->data_off = RTE_PKTMBUF_HEADROOM;
+ rte_packet_prefetch((char *)rxm->buf_addr + rxm->data_off);
+ rxm->nb_segs = 1;
+ rxm->next = NULL;
+ rxm->pkt_len = pkt_len;
+ rxm->data_len = pkt_len;
+ rxm->port = rxq->port_id;
+
+ /*
+ * Store the mbuf address into the next entry of the array
+ * of returned packets.
+ */
+ rx_pkts[nb_rx++] = rxm;
+ }
+ rxq->rx_tail = rx_id;
+
+ /*
+ * If the number of free Rx descriptors is greater than the Rx free
+ * threshold of the queue, advance the Receive Descriptor Tail (RDT)
+ * register.
+ * Update the RDT with the value of the last processed Rx descriptor
+ * minus 1, to guarantee that the RDT register is never equal to the
+ * RDH register, which creates a "full" ring situation from the
+ * hardware point of view...
+ */
+ nb_hold = (uint16_t)(nb_hold + rxq->nb_rx_hold);
+ if (nb_hold > rxq->rx_free_thresh) {
+ PMD_RX_LOG(DEBUG,
+ "port_id=%u queue_id=%u rx_tail=%u nb_hold=%u nb_rx=%u",
+ (uint16_t)rxq->port_id, (uint16_t)rxq->queue_id,
+ (uint16_t)rx_id, (uint16_t)nb_hold,
+ (uint16_t)nb_rx);
+ rx_id = (uint16_t)((rx_id == 0) ?
+ (rxq->nb_rx_desc - 1) : (rx_id - 1));
+ ngbe_set32(rxq->rdt_reg_addr, rx_id);
+ nb_hold = 0;
+ }
+ rxq->nb_rx_hold = nb_hold;
+ return nb_rx;
+}
+
+
/*********************************************************************
*
* Queue management functions
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
index 668588fbf8..edfba8a672 100644
--- a/drivers/net/ngbe/ngbe_rxtx.h
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -51,6 +51,77 @@ struct ngbe_rx_desc {
#define NGBE_RXD_HDRADDR(rxd, v) \
(((volatile __le64 *)(rxd))[1] = cpu_to_le64(v))
+/* @ngbe_rx_desc.dw0 */
+#define NGBE_RXD_RSSTYPE(dw) RS(dw, 0, 0xF)
+#define NGBE_RSSTYPE_NONE 0
+#define NGBE_RSSTYPE_IPV4TCP 1
+#define NGBE_RSSTYPE_IPV4 2
+#define NGBE_RSSTYPE_IPV6TCP 3
+#define NGBE_RSSTYPE_IPV4SCTP 4
+#define NGBE_RSSTYPE_IPV6 5
+#define NGBE_RSSTYPE_IPV6SCTP 6
+#define NGBE_RSSTYPE_IPV4UDP 7
+#define NGBE_RSSTYPE_IPV6UDP 8
+#define NGBE_RSSTYPE_FDIR 15
+#define NGBE_RXD_SECTYPE(dw) RS(dw, 4, 0x3)
+#define NGBE_RXD_SECTYPE_NONE LS(0, 4, 0x3)
+#define NGBE_RXD_SECTYPE_IPSECESP LS(2, 4, 0x3)
+#define NGBE_RXD_SECTYPE_IPSECAH LS(3, 4, 0x3)
+#define NGBE_RXD_TPIDSEL(dw) RS(dw, 6, 0x7)
+#define NGBE_RXD_PTID(dw) RS(dw, 9, 0xFF)
+#define NGBE_RXD_RSCCNT(dw) RS(dw, 17, 0xF)
+#define NGBE_RXD_HDRLEN(dw) RS(dw, 21, 0x3FF)
+#define NGBE_RXD_SPH MS(31, 0x1)
+
+/* @ngbe_rx_desc.dw1 */
+/** bit 0-31, as rss hash when **/
+#define NGBE_RXD_RSSHASH(rxd) ((rxd)->qw0.dw1)
+
+/** bit 0-31, as ip csum when **/
+#define NGBE_RXD_IPID(rxd) ((rxd)->qw0.hi.ipid)
+#define NGBE_RXD_CSUM(rxd) ((rxd)->qw0.hi.csum)
+
+/* @ngbe_rx_desc.dw2 */
+#define NGBE_RXD_STATUS(rxd) ((rxd)->qw1.lo.status)
+/** bit 0-1 **/
+#define NGBE_RXD_STAT_DD MS(0, 0x1) /* Descriptor Done */
+#define NGBE_RXD_STAT_EOP MS(1, 0x1) /* End of Packet */
+/** bit 2-31, when EOP=0 **/
+#define NGBE_RXD_NEXTP_RESV(v) LS(v, 2, 0x3)
+#define NGBE_RXD_NEXTP(dw) RS(dw, 4, 0xFFFF) /* Next Descriptor */
+/** bit 2-31, when EOP=1 **/
+#define NGBE_RXD_PKT_CLS_MASK MS(2, 0x7) /* Packet Class */
+#define NGBE_RXD_PKT_CLS_TC_RSS LS(0, 2, 0x7) /* RSS Hash */
+#define NGBE_RXD_PKT_CLS_FLM LS(1, 2, 0x7) /* FDir Match */
+#define NGBE_RXD_PKT_CLS_SYN LS(2, 2, 0x7) /* TCP Sync */
+#define NGBE_RXD_PKT_CLS_5TUPLE LS(3, 2, 0x7) /* 5 Tuple */
+#define NGBE_RXD_PKT_CLS_ETF LS(4, 2, 0x7) /* Ethertype Filter */
+#define NGBE_RXD_STAT_VLAN MS(5, 0x1) /* IEEE VLAN Packet */
+#define NGBE_RXD_STAT_UDPCS MS(6, 0x1) /* UDP xsum calculated */
+#define NGBE_RXD_STAT_L4CS MS(7, 0x1) /* L4 xsum calculated */
+#define NGBE_RXD_STAT_IPCS MS(8, 0x1) /* IP xsum calculated */
+#define NGBE_RXD_STAT_PIF MS(9, 0x1) /* Non-unicast address */
+#define NGBE_RXD_STAT_EIPCS MS(10, 0x1) /* Encap IP xsum calculated */
+#define NGBE_RXD_STAT_VEXT MS(11, 0x1) /* Multi-VLAN */
+#define NGBE_RXD_STAT_IPV6EX MS(12, 0x1) /* IPv6 with option header */
+#define NGBE_RXD_STAT_LLINT MS(13, 0x1) /* Pkt caused LLI */
+#define NGBE_RXD_STAT_1588 MS(14, 0x1) /* IEEE1588 Time Stamp */
+#define NGBE_RXD_STAT_SECP MS(15, 0x1) /* Security Processing */
+#define NGBE_RXD_STAT_LB MS(16, 0x1) /* Loopback Status */
+/*** bit 17-30, when PTYPE=IP ***/
+#define NGBE_RXD_STAT_BMC MS(17, 0x1) /* PTYPE=IP, BMC status */
+#define NGBE_RXD_ERR_HBO MS(23, 0x1) /* Header Buffer Overflow */
+#define NGBE_RXD_ERR_EIPCS MS(26, 0x1) /* Encap IP header error */
+#define NGBE_RXD_ERR_SECERR MS(27, 0x1) /* macsec or ipsec error */
+#define NGBE_RXD_ERR_RXE MS(29, 0x1) /* Any MAC Error */
+#define NGBE_RXD_ERR_L4CS MS(30, 0x1) /* TCP/UDP xsum error */
+#define NGBE_RXD_ERR_IPCS MS(31, 0x1) /* IP xsum error */
+#define NGBE_RXD_ERR_CSUM(dw) RS(dw, 30, 0x3)
+
+/* @ngbe_rx_desc.dw3 */
+#define NGBE_RXD_LENGTH(rxd) ((rxd)->qw1.hi.len)
+#define NGBE_RXD_VLAN(rxd) ((rxd)->qw1.hi.tag)
+
/*****************************************************************************
* Transmit Descriptor
*****************************************************************************/
@@ -81,6 +152,8 @@ struct ngbe_tx_desc {
#define RX_RING_SZ ((NGBE_RING_DESC_MAX + RTE_PMD_NGBE_RX_MAX_BURST) * \
sizeof(struct ngbe_rx_desc))
+#define rte_packet_prefetch(p) rte_prefetch1(p)
+
#define RTE_NGBE_REGISTER_POLL_WAIT_10_MS 10
#define RTE_NGBE_WAIT_100_US 100
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 18/19] net/ngbe: add simple Tx flow
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (16 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 17/19] net/ngbe: add simple Rx flow Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device Jiawen Wu
2021-07-07 14:13 ` [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Andrew Rybchenko
19 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Initialize device with the simplest transmit functions.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/ngbe_ethdev.c | 1 +
drivers/net/ngbe/ngbe_ethdev.h | 3 +
drivers/net/ngbe/ngbe_rxtx.c | 228 +++++++++++++++++++++++++++++++++
drivers/net/ngbe/ngbe_rxtx.h | 27 ++++
4 files changed, 259 insertions(+)
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index e5e2f44454..944fea6a11 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -138,6 +138,7 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
eth_dev->dev_ops = &ngbe_eth_dev_ops;
eth_dev->rx_pkt_burst = &ngbe_recv_pkts;
+ eth_dev->tx_pkt_burst = &ngbe_xmit_pkts_simple;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index ff366d6a5e..5a2f45cc2f 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -102,6 +102,9 @@ int ngbe_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id);
uint16_t ngbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts);
+uint16_t ngbe_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+
void ngbe_set_ivar_map(struct ngbe_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index e72c74869a..8dca07c6d9 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -20,6 +20,234 @@
*/
#define rte_ngbe_prefetch(p) rte_prefetch0(p)
+/*********************************************************************
+ *
+ * Tx functions
+ *
+ **********************************************************************/
+
+/*
+ * Check for descriptors with their DD bit set and free mbufs.
+ * Return the total number of buffers freed.
+ */
+static __rte_always_inline int
+ngbe_tx_free_bufs(struct ngbe_tx_queue *txq)
+{
+ struct ngbe_tx_entry *txep;
+ uint32_t status;
+ int i, nb_free = 0;
+ struct rte_mbuf *m, *free[RTE_NGBE_TX_MAX_FREE_BUF_SZ];
+
+ /* check DD bit on threshold descriptor */
+ status = txq->tx_ring[txq->tx_next_dd].dw3;
+ if (!(status & rte_cpu_to_le_32(NGBE_TXD_DD))) {
+ if (txq->nb_tx_free >> 1 < txq->tx_free_thresh)
+ ngbe_set32_masked(txq->tdc_reg_addr,
+ NGBE_TXCFG_FLUSH, NGBE_TXCFG_FLUSH);
+ return 0;
+ }
+
+ /*
+ * first buffer to free from S/W ring is at index
+ * tx_next_dd - (tx_free_thresh-1)
+ */
+ txep = &txq->sw_ring[txq->tx_next_dd - (txq->tx_free_thresh - 1)];
+ for (i = 0; i < txq->tx_free_thresh; ++i, ++txep) {
+ /* free buffers one at a time */
+ m = rte_pktmbuf_prefree_seg(txep->mbuf);
+ txep->mbuf = NULL;
+
+ if (unlikely(m == NULL))
+ continue;
+
+ if (nb_free >= RTE_NGBE_TX_MAX_FREE_BUF_SZ ||
+ (nb_free > 0 && m->pool != free[0]->pool)) {
+ rte_mempool_put_bulk(free[0]->pool,
+ (void **)free, nb_free);
+ nb_free = 0;
+ }
+
+ free[nb_free++] = m;
+ }
+
+ if (nb_free > 0)
+ rte_mempool_put_bulk(free[0]->pool, (void **)free, nb_free);
+
+ /* buffers were freed, update counters */
+ txq->nb_tx_free = (uint16_t)(txq->nb_tx_free + txq->tx_free_thresh);
+ txq->tx_next_dd = (uint16_t)(txq->tx_next_dd + txq->tx_free_thresh);
+ if (txq->tx_next_dd >= txq->nb_tx_desc)
+ txq->tx_next_dd = (uint16_t)(txq->tx_free_thresh - 1);
+
+ return txq->tx_free_thresh;
+}
+
+/* Populate 4 descriptors with data from 4 mbufs */
+static inline void
+tx4(volatile struct ngbe_tx_desc *txdp, struct rte_mbuf **pkts)
+{
+ uint64_t buf_dma_addr;
+ uint32_t pkt_len;
+ int i;
+
+ for (i = 0; i < 4; ++i, ++txdp, ++pkts) {
+ buf_dma_addr = rte_mbuf_data_iova(*pkts);
+ pkt_len = (*pkts)->data_len;
+
+ /* write data to descriptor */
+ txdp->qw0 = rte_cpu_to_le_64(buf_dma_addr);
+ txdp->dw2 = cpu_to_le32(NGBE_TXD_FLAGS |
+ NGBE_TXD_DATLEN(pkt_len));
+ txdp->dw3 = cpu_to_le32(NGBE_TXD_PAYLEN(pkt_len));
+
+ rte_prefetch0(&(*pkts)->pool);
+ }
+}
+
+/* Populate 1 descriptor with data from 1 mbuf */
+static inline void
+tx1(volatile struct ngbe_tx_desc *txdp, struct rte_mbuf **pkts)
+{
+ uint64_t buf_dma_addr;
+ uint32_t pkt_len;
+
+ buf_dma_addr = rte_mbuf_data_iova(*pkts);
+ pkt_len = (*pkts)->data_len;
+
+ /* write data to descriptor */
+ txdp->qw0 = cpu_to_le64(buf_dma_addr);
+ txdp->dw2 = cpu_to_le32(NGBE_TXD_FLAGS |
+ NGBE_TXD_DATLEN(pkt_len));
+ txdp->dw3 = cpu_to_le32(NGBE_TXD_PAYLEN(pkt_len));
+
+ rte_prefetch0(&(*pkts)->pool);
+}
+
+/*
+ * Fill H/W descriptor ring with mbuf data.
+ * Copy mbuf pointers to the S/W ring.
+ */
+static inline void
+ngbe_tx_fill_hw_ring(struct ngbe_tx_queue *txq, struct rte_mbuf **pkts,
+ uint16_t nb_pkts)
+{
+ volatile struct ngbe_tx_desc *txdp = &txq->tx_ring[txq->tx_tail];
+ struct ngbe_tx_entry *txep = &txq->sw_ring[txq->tx_tail];
+ const int N_PER_LOOP = 4;
+ const int N_PER_LOOP_MASK = N_PER_LOOP - 1;
+ int mainpart, leftover;
+ int i, j;
+
+ /*
+ * Process most of the packets in chunks of N pkts. Any
+ * leftover packets will get processed one at a time.
+ */
+ mainpart = (nb_pkts & ((uint32_t)~N_PER_LOOP_MASK));
+ leftover = (nb_pkts & ((uint32_t)N_PER_LOOP_MASK));
+ for (i = 0; i < mainpart; i += N_PER_LOOP) {
+ /* Copy N mbuf pointers to the S/W ring */
+ for (j = 0; j < N_PER_LOOP; ++j)
+ (txep + i + j)->mbuf = *(pkts + i + j);
+ tx4(txdp + i, pkts + i);
+ }
+
+ if (unlikely(leftover > 0)) {
+ for (i = 0; i < leftover; ++i) {
+ (txep + mainpart + i)->mbuf = *(pkts + mainpart + i);
+ tx1(txdp + mainpart + i, pkts + mainpart + i);
+ }
+ }
+}
+
+static inline uint16_t
+tx_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct ngbe_tx_queue *txq = (struct ngbe_tx_queue *)tx_queue;
+ uint16_t n = 0;
+
+ /*
+ * Begin scanning the H/W ring for done descriptors when the
+ * number of available descriptors drops below tx_free_thresh.
+ * For each done descriptor, free the associated buffer.
+ */
+ if (txq->nb_tx_free < txq->tx_free_thresh)
+ ngbe_tx_free_bufs(txq);
+
+ /* Only use descriptors that are available */
+ nb_pkts = (uint16_t)RTE_MIN(txq->nb_tx_free, nb_pkts);
+ if (unlikely(nb_pkts == 0))
+ return 0;
+
+ /* Use exactly nb_pkts descriptors */
+ txq->nb_tx_free = (uint16_t)(txq->nb_tx_free - nb_pkts);
+
+ /*
+ * At this point, we know there are enough descriptors in the
+ * ring to transmit all the packets. This assumes that each
+ * mbuf contains a single segment, and that no new offloads
+ * are expected, which would require a new context descriptor.
+ */
+
+ /*
+ * See if we're going to wrap-around. If so, handle the top
+ * of the descriptor ring first, then do the bottom. If not,
+ * the processing looks just like the "bottom" part anyway...
+ */
+ if ((txq->tx_tail + nb_pkts) > txq->nb_tx_desc) {
+ n = (uint16_t)(txq->nb_tx_desc - txq->tx_tail);
+ ngbe_tx_fill_hw_ring(txq, tx_pkts, n);
+ txq->tx_tail = 0;
+ }
+
+ /* Fill H/W descriptor ring with mbuf data */
+ ngbe_tx_fill_hw_ring(txq, tx_pkts + n, (uint16_t)(nb_pkts - n));
+ txq->tx_tail = (uint16_t)(txq->tx_tail + (nb_pkts - n));
+
+ /*
+ * Check for wrap-around. This would only happen if we used
+ * up to the last descriptor in the ring, no more, no less.
+ */
+ if (txq->tx_tail >= txq->nb_tx_desc)
+ txq->tx_tail = 0;
+
+ PMD_TX_LOG(DEBUG, "port_id=%u queue_id=%u tx_tail=%u nb_tx=%u",
+ (uint16_t)txq->port_id, (uint16_t)txq->queue_id,
+ (uint16_t)txq->tx_tail, (uint16_t)nb_pkts);
+
+ /* update tail pointer */
+ rte_wmb();
+ ngbe_set32_relaxed(txq->tdt_reg_addr, txq->tx_tail);
+
+ return nb_pkts;
+}
+
+uint16_t
+ngbe_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ uint16_t nb_tx;
+
+ /* Try to transmit at least chunks of TX_MAX_BURST pkts */
+ if (likely(nb_pkts <= RTE_PMD_NGBE_TX_MAX_BURST))
+ return tx_xmit_pkts(tx_queue, tx_pkts, nb_pkts);
+
+ /* transmit more than the max burst, in chunks of TX_MAX_BURST */
+ nb_tx = 0;
+ while (nb_pkts != 0) {
+ uint16_t ret, n;
+
+ n = (uint16_t)RTE_MIN(nb_pkts, RTE_PMD_NGBE_TX_MAX_BURST);
+ ret = tx_xmit_pkts(tx_queue, &tx_pkts[nb_tx], n);
+ nb_tx = (uint16_t)(nb_tx + ret);
+ nb_pkts = (uint16_t)(nb_pkts - ret);
+ if (ret < n)
+ break;
+ }
+
+ return nb_tx;
+}
+
/*********************************************************************
*
* Rx functions
diff --git a/drivers/net/ngbe/ngbe_rxtx.h b/drivers/net/ngbe/ngbe_rxtx.h
index edfba8a672..0f3829425b 100644
--- a/drivers/net/ngbe/ngbe_rxtx.h
+++ b/drivers/net/ngbe/ngbe_rxtx.h
@@ -147,7 +147,34 @@ struct ngbe_tx_desc {
rte_le32_t dw3; /* r.olinfo_status, w.status */
};
+/* @ngbe_tx_desc.dw2 */
+#define NGBE_TXD_DATLEN(v) ((0xFFFF & (v))) /* data buffer length */
+#define NGBE_TXD_1588 ((0x1) << 19) /* IEEE1588 time stamp */
+#define NGBE_TXD_DATA ((0x0) << 20) /* data descriptor */
+#define NGBE_TXD_EOP ((0x1) << 24) /* End of Packet */
+#define NGBE_TXD_FCS ((0x1) << 25) /* Insert FCS */
+#define NGBE_TXD_LINKSEC ((0x1) << 26) /* Insert LinkSec */
+#define NGBE_TXD_ECU ((0x1) << 28) /* forward to ECU */
+#define NGBE_TXD_CNTAG ((0x1) << 29) /* insert CN tag */
+#define NGBE_TXD_VLE ((0x1) << 30) /* insert VLAN tag */
+#define NGBE_TXD_TSE ((0x1) << 31) /* transmit segmentation */
+
+#define NGBE_TXD_FLAGS (NGBE_TXD_FCS | NGBE_TXD_EOP)
+
+/* @ngbe_tx_desc.dw3 */
+#define NGBE_TXD_DD_UNUSED NGBE_TXD_DD
+#define NGBE_TXD_IDX_UNUSED(v) NGBE_TXD_IDX(v)
+#define NGBE_TXD_CC ((0x1) << 7) /* check context */
+#define NGBE_TXD_IPSEC ((0x1) << 8) /* request ipsec offload */
+#define NGBE_TXD_L4CS ((0x1) << 9) /* insert TCP/UDP/SCTP csum */
+#define NGBE_TXD_IPCS ((0x1) << 10) /* insert IPv4 csum */
+#define NGBE_TXD_EIPCS ((0x1) << 11) /* insert outer IP csum */
+#define NGBE_TXD_MNGFLT ((0x1) << 12) /* enable management filter */
+#define NGBE_TXD_PAYLEN(v) ((0x7FFFF & (v)) << 13) /* payload length */
+
+#define RTE_PMD_NGBE_TX_MAX_BURST 32
#define RTE_PMD_NGBE_RX_MAX_BURST 32
+#define RTE_NGBE_TX_MAX_FREE_BUF_SZ 64
#define RX_RING_SZ ((NGBE_RING_DESC_MAX + RTE_PMD_NGBE_RX_MAX_BURST) * \
sizeof(struct ngbe_rx_desc))
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (17 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 18/19] net/ngbe: add simple Tx flow Jiawen Wu
@ 2021-07-06 9:55 ` Jiawen Wu
2021-07-07 14:12 ` Andrew Rybchenko
2021-07-07 14:13 ` [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Andrew Rybchenko
19 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-06 9:55 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Support to close and reset device.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/ngbe_ethdev.c | 63 ++++++++++++++++++++++++++++++++--
drivers/net/ngbe/ngbe_ethdev.h | 2 ++
drivers/net/ngbe/ngbe_rxtx.c | 20 +++++++++++
3 files changed, 82 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 944fea6a11..1e3c11533b 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -256,7 +256,7 @@ eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
ngbe_dev_close(eth_dev);
- return -EINVAL;
+ return 0;
}
static int
@@ -557,11 +557,66 @@ ngbe_dev_stop(struct rte_eth_dev *dev)
static int
ngbe_dev_close(struct rte_eth_dev *dev)
{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ int retries = 0;
+ int ret;
+
PMD_INIT_FUNC_TRACE();
- RTE_SET_USED(dev);
+ ngbe_pf_reset_hw(hw);
+
+ ret = ngbe_dev_stop(dev);
+
+ ngbe_dev_free_queues(dev);
+
+ /* reprogram the RAR[0] in case user changed it. */
+ ngbe_set_rar(hw, 0, hw->mac.addr, 0, true);
+
+ /* Unlock any pending hardware semaphore */
+ ngbe_swfw_lock_reset(hw);
+
+ /* disable uio intr before callback unregister */
+ rte_intr_disable(intr_handle);
+
+ do {
+ ret = rte_intr_callback_unregister(intr_handle,
+ ngbe_dev_interrupt_handler, dev);
+ if (ret >= 0 || ret == -ENOENT) {
+ break;
+ } else if (ret != -EAGAIN) {
+ PMD_INIT_LOG(ERR,
+ "intr callback unregister failed: %d",
+ ret);
+ }
+ rte_delay_ms(100);
+ } while (retries++ < (10 + NGBE_LINK_UP_TIME));
+
+ rte_free(dev->data->mac_addrs);
+ dev->data->mac_addrs = NULL;
+
+ rte_free(dev->data->hash_mac_addrs);
+ dev->data->hash_mac_addrs = NULL;
+
+ return ret;
+}
+
+/*
+ * Reset PF device.
+ */
+static int
+ngbe_dev_reset(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = eth_ngbe_dev_uninit(dev);
+ if (ret)
+ return ret;
+
+ ret = eth_ngbe_dev_init(dev, NULL);
- return -EINVAL;
+ return ret;
}
static int
@@ -1094,6 +1149,8 @@ static const struct eth_dev_ops ngbe_eth_dev_ops = {
.dev_infos_get = ngbe_dev_info_get,
.dev_start = ngbe_dev_start,
.dev_stop = ngbe_dev_stop,
+ .dev_close = ngbe_dev_close,
+ .dev_reset = ngbe_dev_reset,
.link_update = ngbe_dev_link_update,
.rx_queue_start = ngbe_dev_rx_queue_start,
.rx_queue_stop = ngbe_dev_rx_queue_stop,
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index 5a2f45cc2f..af16d0c3f7 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -67,6 +67,8 @@ ngbe_dev_intr(struct rte_eth_dev *dev)
*/
void ngbe_dev_clear_queues(struct rte_eth_dev *dev);
+void ngbe_dev_free_queues(struct rte_eth_dev *dev);
+
void ngbe_dev_rx_queue_release(void *rxq);
void ngbe_dev_tx_queue_release(void *txq);
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 8dca07c6d9..0547e36fa9 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -906,6 +906,26 @@ ngbe_dev_clear_queues(struct rte_eth_dev *dev)
}
}
+void
+ngbe_dev_free_queues(struct rte_eth_dev *dev)
+{
+ unsigned int i;
+
+ PMD_INIT_FUNC_TRACE();
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ ngbe_dev_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ ngbe_dev_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
static int __rte_cold
ngbe_alloc_rx_queue_mbufs(struct ngbe_rx_queue *rxq)
{
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 02/19] net/ngbe: support probe and remove
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 02/19] net/ngbe: support probe and remove Jiawen Wu
@ 2021-07-07 13:48 ` Andrew Rybchenko
0 siblings, 0 replies; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-07 13:48 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/6/21 12:55 PM, Jiawen Wu wrote:
> Add device IDs for Wangxun 1Gb NICs, map device IDs to register ngbe
> PMD. Add basic PCIe ethdev probe and remove.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
[snip]
>
> RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
> +RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
> +RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");
> +
>
Please, remove trailing empty line.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 10/19] net/ngbe: support link update
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 10/19] net/ngbe: support link update Jiawen Wu
@ 2021-07-07 13:50 ` Andrew Rybchenko
0 siblings, 0 replies; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-07 13:50 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/6/21 12:55 PM, Jiawen Wu wrote:
> Register to handle device interrupt.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Please, fix below errors.
### net/ngbe: support link update
ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in
parentheses
#548: FILE: drivers/net/ngbe/ngbe_ethdev.h:10:
+#define NGBE_FLAG_NEED_LINK_UPDATE (uint32_t)(1 << 0)
ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in
parentheses
#549: FILE: drivers/net/ngbe/ngbe_ethdev.h:11:
+#define NGBE_FLAG_MAILBOX (uint32_t)(1 << 1)
ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in
parentheses
#550: FILE: drivers/net/ngbe/ngbe_ethdev.h:12:
+#define NGBE_FLAG_PHY_INTERRUPT (uint32_t)(1 << 2)
ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in
parentheses
#551: FILE: drivers/net/ngbe/ngbe_ethdev.h:13:
+#define NGBE_FLAG_MACSEC (uint32_t)(1 << 3)
ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in
parentheses
#552: FILE: drivers/net/ngbe/ngbe_ethdev.h:14:
+#define NGBE_FLAG_NEED_LINK_CONFIG (uint32_t)(1 << 4)
total: 5 errors, 0 warnings, 0 checks, 545 lines checked
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 12/19] net/ngbe: add Rx queue setup and release
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
@ 2021-07-07 13:56 ` Andrew Rybchenko
0 siblings, 0 replies; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-07 13:56 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/6/21 12:55 PM, Jiawen Wu wrote:
> Setup device Rx queue and release Rx queue.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
I thikn format string should be on the next its own line
to address below warnings:
### net/ngbe: add Rx queue setup and release
WARNING:LONG_LINE: line length of 86 exceeds 80 columns
#433: FILE: drivers/net/ngbe/ngbe_rxtx.c:280:
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p sw_sc_ring=%p hw_ring=%p
dma_addr=0x%" PRIx64,
CHECK:CAMELCASE: Avoid CamelCase: <PRIx64>
#433: FILE: drivers/net/ngbe/ngbe_rxtx.c:280:
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p sw_sc_ring=%p hw_ring=%p
dma_addr=0x%" PRIx64,
total: 0 errors, 1 warnings, 1 checks, 502 lines checked
[snip]
> +/**
> + * Structure associated with each Rx queue.
> + */
> +struct ngbe_rx_queue {
> + struct rte_mempool *mb_pool; /**< mbuf pool to populate Rx ring. */
> + volatile struct ngbe_rx_desc *rx_ring; /**< Rx ring virtual address. */
> + uint64_t rx_ring_phys_addr; /**< Rx ring DMA address. */
> + volatile uint32_t *rdt_reg_addr; /**< RDT register address. */
> + volatile uint32_t *rdh_reg_addr; /**< RDH register address. */
> + struct ngbe_rx_entry *sw_ring; /**< address of Rx software ring. */
> + /**< address of scattered Rx software ring. */
Should start from /**
> + struct ngbe_scattered_rx_entry *sw_sc_ring;
> + struct rte_mbuf *pkt_first_seg; /**< First segment of current packet. */
> + struct rte_mbuf *pkt_last_seg; /**< Last segment of current packet. */
> + uint16_t nb_rx_desc; /**< number of Rx descriptors. */
> + uint16_t rx_tail; /**< current value of RDT register. */
> + uint16_t nb_rx_hold; /**< number of held free Rx desc. */
> + uint16_t rx_nb_avail; /**< nr of staged pkts ready to ret to app */
> + uint16_t rx_next_avail; /**< idx of next staged pkt to ret to app */
> + uint16_t rx_free_trigger; /**< triggers rx buffer allocation */
> + uint16_t rx_free_thresh; /**< max free Rx desc to hold. */
> + uint16_t queue_id; /**< RX queue index. */
> + uint16_t reg_idx; /**< RX queue register index. */
> + /**< Packet type mask for different NICs. */
I don't understand above comment. Where is packet type mask?
> + uint16_t port_id; /**< Device port identifier. */
> + uint8_t drop_en; /**< If not 0, set SRRCTL.Drop_En. */
> + uint8_t rx_deferred_start; /**< not in global dev start. */
> + /** need to alloc dummy mbuf, for wraparound when scanning hw ring */
> + struct rte_mbuf fake_mbuf;
> + /** hold packets to return to application */
> + struct rte_mbuf *rx_stage[RTE_PMD_NGBE_RX_MAX_BURST * 2];
> +};
Above is very hard to read. Please, align more consistently.
If alignment different in different lines, please, add empty
line to make it readable.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 13/19] net/ngbe: add Tx queue setup and release
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 13/19] net/ngbe: add Tx " Jiawen Wu
@ 2021-07-07 14:00 ` Andrew Rybchenko
0 siblings, 0 replies; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-07 14:00 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/6/21 12:55 PM, Jiawen Wu wrote:
> Setup device Tx queue and release Tx queue.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Same here, format string should be on the next its own line:
### net/ngbe: add Tx queue setup and release
CHECK:CAMELCASE: Avoid CamelCase: <PRIx64>
#299: FILE: drivers/net/ngbe/ngbe_rxtx.c:202:
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%" PRIx64,
total: 0 errors, 0 warnings, 1 checks, 398 lines checked
[snip]
> +
> +/**
> + * Structure associated with each Tx queue.
> + */
> +struct ngbe_tx_queue {
> + /** Tx ring virtual address. */
> + volatile struct ngbe_tx_desc *tx_ring;
> + uint64_t tx_ring_phys_addr; /**< Tx ring DMA address. */
> + struct ngbe_tx_entry *sw_ring; /**< address of SW ring for scalar PMD.*/
> + volatile uint32_t *tdt_reg_addr; /**< Address of TDT register. */
> + volatile uint32_t *tdc_reg_addr; /**< Address of TDC register. */
> + uint16_t nb_tx_desc; /**< number of Tx descriptors. */
> + uint16_t tx_tail; /**< current value of TDT reg. */
> + /**< Start freeing Tx buffers if there are less free descriptors than
> + * this value.
> + */
Comment should start from /**
Also multi-line comment should be:
/**
* Comment here
*/
> + uint16_t tx_free_thresh;
> + /** Index to last Tx descriptor to have been cleaned. */
> + uint16_t last_desc_cleaned;
> + /** Total number of Tx descriptors ready to be allocated. */
> + uint16_t nb_tx_free;
> + uint16_t tx_next_dd; /**< next desc to scan for DD bit */
> + uint16_t queue_id; /**< Tx queue index. */
> + uint16_t reg_idx; /**< Tx queue register index. */
> + uint16_t port_id; /**< Device port identifier. */
> + uint8_t pthresh; /**< Prefetch threshold register. */
> + uint8_t hthresh; /**< Host threshold register. */
> + uint8_t wthresh; /**< Write-back threshold reg. */
> + uint32_t ctx_curr; /**< Hardware context states. */
> + /** Hardware context0 history. */
> + struct ngbe_ctx_info ctx_cache[NGBE_CTX_NUM];
> + const struct ngbe_txq_ops *ops; /**< txq ops */
> + uint8_t tx_deferred_start; /**< not in global dev start. */
> +};
Some of comments above have full stop, some do not have.
Be consistent. I'd simply remove full stop everywhere to make
lines a bit shorter.
[snip]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations Jiawen Wu
@ 2021-07-07 14:04 ` Andrew Rybchenko
2021-07-08 6:09 ` Jiawen Wu
0 siblings, 1 reply; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-07 14:04 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/6/21 12:55 PM, Jiawen Wu wrote:
> Setup MSI-X interrupt, complete PHY configuration and set device link
> speed to start device. Disable interrupt, stop hardware and clear queues
> to stop device.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see
Documentation/timers/timers-howto.rst
#242: FILE: drivers/net/ngbe/base/ngbe_phy_mvl.c:70:
+ msleep(1);
Any comments?
CHECK:BRACES: Blank lines aren't necessary before a close brace '}'
#1102: FILE: drivers/net/ngbe/ngbe_rxtx.c:531:
+
+}
Above must be fixed.
[snip]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device Jiawen Wu
@ 2021-07-07 14:12 ` Andrew Rybchenko
2021-07-08 8:56 ` Jiawen Wu
0 siblings, 1 reply; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-07 14:12 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/6/21 12:55 PM, Jiawen Wu wrote:
> Support to close and reset device.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
> ---
> drivers/net/ngbe/ngbe_ethdev.c | 63 ++++++++++++++++++++++++++++++++--
> drivers/net/ngbe/ngbe_ethdev.h | 2 ++
> drivers/net/ngbe/ngbe_rxtx.c | 20 +++++++++++
> 3 files changed, 82 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
> index 944fea6a11..1e3c11533b 100644
> --- a/drivers/net/ngbe/ngbe_ethdev.c
> +++ b/drivers/net/ngbe/ngbe_ethdev.c
> @@ -256,7 +256,7 @@ eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
>
> ngbe_dev_close(eth_dev);
>
> - return -EINVAL;
> + return 0;
> }
>
> static int
> @@ -557,11 +557,66 @@ ngbe_dev_stop(struct rte_eth_dev *dev)
> static int
> ngbe_dev_close(struct rte_eth_dev *dev)
> {
> + struct ngbe_hw *hw = ngbe_dev_hw(dev);
> + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> + struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> + int retries = 0;
> + int ret;
> +
> PMD_INIT_FUNC_TRACE();
>
> - RTE_SET_USED(dev);
> + ngbe_pf_reset_hw(hw);
> +
> + ret = ngbe_dev_stop(dev);
Is it OK that the ret ignored?
> +
> + ngbe_dev_free_queues(dev);
> +
> + /* reprogram the RAR[0] in case user changed it. */
> + ngbe_set_rar(hw, 0, hw->mac.addr, 0, true);
> +
> + /* Unlock any pending hardware semaphore */
> + ngbe_swfw_lock_reset(hw);
> +
> + /* disable uio intr before callback unregister */
> + rte_intr_disable(intr_handle);
> +
> + do {
> + ret = rte_intr_callback_unregister(intr_handle,
> + ngbe_dev_interrupt_handler, dev);
> + if (ret >= 0 || ret == -ENOENT) {
> + break;
> + } else if (ret != -EAGAIN) {
> + PMD_INIT_LOG(ERR,
> + "intr callback unregister failed: %d",
> + ret);
> + }
> + rte_delay_ms(100);
> + } while (retries++ < (10 + NGBE_LINK_UP_TIME));
> +
> + rte_free(dev->data->mac_addrs);
> + dev->data->mac_addrs = NULL;
> +
> + rte_free(dev->data->hash_mac_addrs);
> + dev->data->hash_mac_addrs = NULL;
> +
> + return ret;
> +}
> +
> +/*
> + * Reset PF device.
> + */
> +static int
> +ngbe_dev_reset(struct rte_eth_dev *dev)
> +{
> + int ret;
> +
> + ret = eth_ngbe_dev_uninit(dev);
> + if (ret)
Compare vs 0
[snip]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
` (18 preceding siblings ...)
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device Jiawen Wu
@ 2021-07-07 14:13 ` Andrew Rybchenko
19 siblings, 0 replies; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-07 14:13 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/6/21 12:55 PM, Jiawen Wu wrote:
> This patch set provides a skeleton of ngbe PMD,
> which adapted to Wangxun WX1860 series NICs.
Hopefully final review.
$ ./devtools/check-meson.py
Error: Incorrect indent at drivers/net/meson.build:43
Error: Incorrect indent at drivers/net/ngbe/meson.build:14
Error: Incorrect indent at drivers/net/ngbe/meson.build:15
Error: Incorrect indent at drivers/net/ngbe/base/meson.build:5
Error: Incorrect indent at drivers/net/ngbe/base/meson.build:6
Error: Incorrect indent at drivers/net/ngbe/base/meson.build:7
Error: Incorrect indent at drivers/net/ngbe/base/meson.build:8
Error: Incorrect indent at drivers/net/ngbe/base/meson.build:9
Error: Incorrect indent at drivers/net/ngbe/base/meson.build:10
Error: Incorrect indent at drivers/net/ngbe/base/meson.build:11
Please, run it after each patch which changes meson.build
and fix errors.
I'm not sure about __rte_cold markup in the patches.
Do you really need it? I'll keep it up to you, but I'd
recommend to remove it if you don't really see a measurable
performance drop.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations
2021-07-07 14:04 ` Andrew Rybchenko
@ 2021-07-08 6:09 ` Jiawen Wu
2021-07-08 7:36 ` Andrew Rybchenko
0 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-08 6:09 UTC (permalink / raw)
To: 'Andrew Rybchenko', dev
On July 7, 2021 10:05 PM, Andrew Rybchenko wrote:
> On 7/6/21 12:55 PM, Jiawen Wu wrote:
> > Setup MSI-X interrupt, complete PHY configuration and set device link
> > speed to start device. Disable interrupt, stop hardware and clear
> > queues to stop device.
> >
> > Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
>
> WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see
> Documentation/timers/timers-howto.rst
> #242: FILE: drivers/net/ngbe/base/ngbe_phy_mvl.c:70:
> + msleep(1);
>
> Any comments?
>
This depends on the design of the hardware.
>
>
> CHECK:BRACES: Blank lines aren't necessary before a close brace '}'
> #1102: FILE: drivers/net/ngbe/ngbe_rxtx.c:531:
> +
> +}
>
> Above must be fixed.
>
> [snip]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations
2021-07-08 6:09 ` Jiawen Wu
@ 2021-07-08 7:36 ` Andrew Rybchenko
2021-07-08 7:50 ` Jiawen Wu
0 siblings, 1 reply; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-08 7:36 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/8/21 9:09 AM, Jiawen Wu wrote:
> On July 7, 2021 10:05 PM, Andrew Rybchenko wrote:
>> On 7/6/21 12:55 PM, Jiawen Wu wrote:
>>> Setup MSI-X interrupt, complete PHY configuration and set device link
>>> speed to start device. Disable interrupt, stop hardware and clear
>>> queues to stop device.
>>>
>>> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
>>
>> WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see
>> Documentation/timers/timers-howto.rst
>> #242: FILE: drivers/net/ngbe/base/ngbe_phy_mvl.c:70:
>> + msleep(1);
>>
>> Any comments?
>>
>
> This depends on the design of the hardware.
Isn't is a problem if sleep will be longer in fact?
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations
2021-07-08 7:36 ` Andrew Rybchenko
@ 2021-07-08 7:50 ` Jiawen Wu
2021-07-08 8:07 ` Andrew Rybchenko
0 siblings, 1 reply; 32+ messages in thread
From: Jiawen Wu @ 2021-07-08 7:50 UTC (permalink / raw)
To: 'Andrew Rybchenko', dev
On July 8, 2021 3:37 PM, Andrew Rybchenko wrote:
> On 7/8/21 9:09 AM, Jiawen Wu wrote:
> > On July 7, 2021 10:05 PM, Andrew Rybchenko wrote:
> >> On 7/6/21 12:55 PM, Jiawen Wu wrote:
> >>> Setup MSI-X interrupt, complete PHY configuration and set device
> >>> link speed to start device. Disable interrupt, stop hardware and
> >>> clear queues to stop device.
> >>>
> >>> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
> >>
> >> WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see
> >> Documentation/timers/timers-howto.rst
> >> #242: FILE: drivers/net/ngbe/base/ngbe_phy_mvl.c:70:
> >> + msleep(1);
> >>
> >> Any comments?
> >>
> >
> > This depends on the design of the hardware.
>
> Isn't is a problem if sleep will be longer in fact?
I thought about replacing it with 'msec_delay', but it is working right now.
And 'msleep(1)' is also well used in the kernel driver, so I haven't changed it yet.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations
2021-07-08 7:50 ` Jiawen Wu
@ 2021-07-08 8:07 ` Andrew Rybchenko
0 siblings, 0 replies; 32+ messages in thread
From: Andrew Rybchenko @ 2021-07-08 8:07 UTC (permalink / raw)
To: Jiawen Wu, dev
On 7/8/21 10:50 AM, Jiawen Wu wrote:
> On July 8, 2021 3:37 PM, Andrew Rybchenko wrote:
>> On 7/8/21 9:09 AM, Jiawen Wu wrote:
>>> On July 7, 2021 10:05 PM, Andrew Rybchenko wrote:
>>>> On 7/6/21 12:55 PM, Jiawen Wu wrote:
>>>>> Setup MSI-X interrupt, complete PHY configuration and set device
>>>>> link speed to start device. Disable interrupt, stop hardware and
>>>>> clear queues to stop device.
>>>>>
>>>>> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
>>>>
>>>> WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see
>>>> Documentation/timers/timers-howto.rst
>>>> #242: FILE: drivers/net/ngbe/base/ngbe_phy_mvl.c:70:
>>>> + msleep(1);
>>>>
>>>> Any comments?
>>>>
>>>
>>> This depends on the design of the hardware.
>>
>> Isn't is a problem if sleep will be longer in fact?
>
> I thought about replacing it with 'msec_delay', but it is working right now.
> And 'msleep(1)' is also well used in the kernel driver, so I haven't changed it yet.
OK, I see.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device
2021-07-07 14:12 ` Andrew Rybchenko
@ 2021-07-08 8:56 ` Jiawen Wu
0 siblings, 0 replies; 32+ messages in thread
From: Jiawen Wu @ 2021-07-08 8:56 UTC (permalink / raw)
To: 'Andrew Rybchenko', dev
On July 7, 2021 10:13 PM, Andrew Rybchenko wrote:
> On 7/6/21 12:55 PM, Jiawen Wu wrote:
> > Support to close and reset device.
> >
> > Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
> > ---
> > drivers/net/ngbe/ngbe_ethdev.c | 63
> > ++++++++++++++++++++++++++++++++--
> > drivers/net/ngbe/ngbe_ethdev.h | 2 ++
> > drivers/net/ngbe/ngbe_rxtx.c | 20 +++++++++++
> > 3 files changed, 82 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/ngbe/ngbe_ethdev.c
> > b/drivers/net/ngbe/ngbe_ethdev.c index 944fea6a11..1e3c11533b 100644
> > --- a/drivers/net/ngbe/ngbe_ethdev.c
> > +++ b/drivers/net/ngbe/ngbe_ethdev.c
> > @@ -256,7 +256,7 @@ eth_ngbe_dev_uninit(struct rte_eth_dev *eth_dev)
> >
> > ngbe_dev_close(eth_dev);
> >
> > - return -EINVAL;
> > + return 0;
> > }
> >
> > static int
> > @@ -557,11 +557,66 @@ ngbe_dev_stop(struct rte_eth_dev *dev) static
> > int ngbe_dev_close(struct rte_eth_dev *dev) {
> > + struct ngbe_hw *hw = ngbe_dev_hw(dev);
> > + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> > + struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> > + int retries = 0;
> > + int ret;
> > +
> > PMD_INIT_FUNC_TRACE();
> >
> > - RTE_SET_USED(dev);
> > + ngbe_pf_reset_hw(hw);
> > +
> > + ret = ngbe_dev_stop(dev);
>
> Is it OK that the ret ignored?
>
In fact, there is no other value than 0 returned.
Maybe I should just remove 'ret'.
> > +
> > + ngbe_dev_free_queues(dev);
> > +
> > + /* reprogram the RAR[0] in case user changed it. */
> > + ngbe_set_rar(hw, 0, hw->mac.addr, 0, true);
> > +
> > + /* Unlock any pending hardware semaphore */
> > + ngbe_swfw_lock_reset(hw);
> > +
> > + /* disable uio intr before callback unregister */
> > + rte_intr_disable(intr_handle);
> > +
> > + do {
> > + ret = rte_intr_callback_unregister(intr_handle,
> > + ngbe_dev_interrupt_handler, dev);
> > + if (ret >= 0 || ret == -ENOENT) {
> > + break;
> > + } else if (ret != -EAGAIN) {
> > + PMD_INIT_LOG(ERR,
> > + "intr callback unregister failed: %d",
> > + ret);
> > + }
> > + rte_delay_ms(100);
> > + } while (retries++ < (10 + NGBE_LINK_UP_TIME));
> > +
> > + rte_free(dev->data->mac_addrs);
> > + dev->data->mac_addrs = NULL;
> > +
> > + rte_free(dev->data->hash_mac_addrs);
> > + dev->data->hash_mac_addrs = NULL;
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * Reset PF device.
> > + */
> > +static int
> > +ngbe_dev_reset(struct rte_eth_dev *dev) {
> > + int ret;
> > +
> > + ret = eth_ngbe_dev_uninit(dev);
> > + if (ret)
>
> Compare vs 0
>
> [snip]
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2021-07-08 8:57 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-06 9:55 [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 02/19] net/ngbe: support probe and remove Jiawen Wu
2021-07-07 13:48 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 03/19] net/ngbe: add log type and error type Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 04/19] net/ngbe: define registers Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 05/19] net/ngbe: set MAC type and LAN ID with device initialization Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 06/19] net/ngbe: init and validate EEPROM Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 07/19] net/ngbe: add HW initialization Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 08/19] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 09/19] net/ngbe: store MAC address Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 10/19] net/ngbe: support link update Jiawen Wu
2021-07-07 13:50 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 11/19] net/ngbe: setup the check PHY link Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-07-07 13:56 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 13/19] net/ngbe: add Tx " Jiawen Wu
2021-07-07 14:00 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 14/19] net/ngbe: add device start and stop operations Jiawen Wu
2021-07-07 14:04 ` Andrew Rybchenko
2021-07-08 6:09 ` Jiawen Wu
2021-07-08 7:36 ` Andrew Rybchenko
2021-07-08 7:50 ` Jiawen Wu
2021-07-08 8:07 ` Andrew Rybchenko
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 15/19] net/ngbe: add Tx queue start and stop Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 16/19] net/ngbe: add Rx " Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 17/19] net/ngbe: add simple Rx flow Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 18/19] net/ngbe: add simple Tx flow Jiawen Wu
2021-07-06 9:55 ` [dpdk-dev] [PATCH v7 19/19] net/ngbe: support to close and reset device Jiawen Wu
2021-07-07 14:12 ` Andrew Rybchenko
2021-07-08 8:56 ` Jiawen Wu
2021-07-07 14:13 ` [dpdk-dev] [PATCH v7 00/19] net: ngbe PMD Andrew Rybchenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.