From: Titus Rwantare <titusr@google.com>
To: Corey Minyard <minyard@acm.org>
Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org,
Titus Rwantare <titusr@google.com>
Subject: [PATCH v5 0/5] Add support for PMBus in QEMU
Date: Thu, 8 Jul 2021 10:25:51 -0700 [thread overview]
Message-ID: <20210708172556.1868139-1-titusr@google.com> (raw)
Hello,
This patch series adds an interface to start supporting PMBus devices in QEMU.
I’ve included two PMBus devices: MAX34451 and ADM1272.
PMBus is a variant of SMBus meant for digital management of power supplies.
PMBus adds to the SMBus standard by defining a number of constants and commands
used by compliant devices. The specification for PMBus can be found at:
https://pmbus.org/specification-archives/
Currently, the goal for these devices is to emulate basic functionality by
reading and writing registers. Timing, and some logical operation is not
implemented. This implementation supports nearly all available registers for
PMBus including:
- Voltage inputs and outputs
- Current inputs and outputs
- Temperature sensors
Unimplimented registers get passed through to the device model, and device
models can opt out of using the standard registers with flags. The included
devices make use of these fields and illustrate how to interface with the pmbus
class.
Datasheets for sensors:
https://datasheets.maximintegrated.com/en/ds/MAX34451.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1272.pdf
Since v4:
- switched to BIT_ULL for flags to enable 32 bit hosts
Since v3:
- added VMState descriptions. Adding PMBusPage info to the vmsd has proven to be tricky, it's a TODO for now.
Since v2:
- bump for feedback
- removed commented out code
Since v1:
- addressed Joel's comments
- split out tests into their own patches
Thanks for reviewing,
Titus Rwantare
Titus Rwantare (5):
hw/i2c: add support for PMBus
hw/misc: add ADM1272 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for MAX34451 device model
include/hw/i2c/pmbus_device.h | 517 +++++++++++
hw/i2c/pmbus_device.c | 1612 +++++++++++++++++++++++++++++++++
hw/misc/adm1272.c | 544 +++++++++++
hw/misc/max34451.c | 775 ++++++++++++++++
tests/qtest/adm1272-test.c | 445 +++++++++
tests/qtest/max34451-test.c | 336 +++++++
hw/arm/Kconfig | 3 +
hw/i2c/Kconfig | 4 +
hw/i2c/meson.build | 1 +
hw/misc/Kconfig | 8 +
hw/misc/meson.build | 2 +
tests/qtest/meson.build | 2 +
12 files changed, 4249 insertions(+)
create mode 100644 include/hw/i2c/pmbus_device.h
create mode 100644 hw/i2c/pmbus_device.c
create mode 100644 hw/misc/adm1272.c
create mode 100644 hw/misc/max34451.c
create mode 100644 tests/qtest/adm1272-test.c
create mode 100644 tests/qtest/max34451-test.c
--
2.32.0.93.g670b81a890-goog
next reply other threads:[~2021-07-08 18:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 17:25 Titus Rwantare [this message]
2021-07-08 17:25 ` [PATCH v5 1/5] hw/i2c: add support for PMBus Titus Rwantare
2021-07-08 17:25 ` [PATCH v5 2/5] hw/misc: add ADM1272 device Titus Rwantare
2021-07-08 17:25 ` [PATCH v5 3/5] tests/qtest: add tests for ADM1272 device model Titus Rwantare
2021-07-08 17:25 ` [PATCH v5 4/5] hw/misc: add MAX34451 device Titus Rwantare
2021-07-08 17:25 ` [PATCH v5 5/5] tests/qtest: add tests for MAX34451 device model Titus Rwantare
-- strict thread matches above, loose matches on Subject: below --
2021-07-08 17:20 [PATCH v5 0/5] Add support for PMBus in QEMU Titus Rwantare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210708172556.1868139-1-titusr@google.com \
--to=titusr@google.com \
--cc=minyard@acm.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.