[PATCH 5/5] m68k: Remove M52277EVB board

[Tom Rini <trini@konsulko.com>]

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is also the last in family remove the related
support as well.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/m68k/Kconfig                     |   9 -
 arch/m68k/dts/M52277EVB.dts           |  25 --
 arch/m68k/dts/M52277EVB_stmicro.dts   |  22 --
 arch/m68k/dts/Makefile                |   2 -
 arch/m68k/dts/mcf5227x.dtsi           |  48 ---
 arch/m68k/include/asm/cache.h         |   2 +-
 arch/m68k/include/asm/immap.h         |  28 --
 arch/m68k/include/asm/immap_5227x.h   | 237 -----------
 arch/m68k/include/asm/m5227x.h        | 546 --------------------------
 board/freescale/m52277evb/Kconfig     |  15 -
 board/freescale/m52277evb/MAINTAINERS |   7 -
 board/freescale/m52277evb/Makefile    |   6 -
 board/freescale/m52277evb/README      | 228 -----------
 board/freescale/m52277evb/m52277evb.c |  94 -----
 configs/M52277EVB_defconfig           |  34 --
 configs/M52277EVB_stmicro_defconfig   |  36 --
 include/configs/M52277EVB.h           | 243 ------------
 17 files changed, 1 insertion(+), 1581 deletions(-)
 delete mode 100644 arch/m68k/dts/M52277EVB.dts
 delete mode 100644 arch/m68k/dts/M52277EVB_stmicro.dts
 delete mode 100644 arch/m68k/dts/mcf5227x.dtsi
 delete mode 100644 arch/m68k/include/asm/immap_5227x.h
 delete mode 100644 arch/m68k/include/asm/m5227x.h
 delete mode 100644 board/freescale/m52277evb/Kconfig
 delete mode 100644 board/freescale/m52277evb/MAINTAINERS
 delete mode 100644 board/freescale/m52277evb/Makefile
 delete mode 100644 board/freescale/m52277evb/README
 delete mode 100644 board/freescale/m52277evb/m52277evb.c
 delete mode 100644 configs/M52277EVB_defconfig
 delete mode 100644 configs/M52277EVB_stmicro_defconfig
 delete mode 100644 include/configs/M52277EVB.h

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 2d4714184149..1ab37cc9fc3d 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -113,18 +113,10 @@ config M54418
 	bool
 	select MCF5441x
 
-config M52277
-	bool
-	select MCF5227x
-
 choice
 	prompt "Target select"
 	optional
 
-config TARGET_M52277EVB
-	bool "Support M52277EVB"
-	select M52277
-
 config TARGET_M5235EVB
 	bool "Support M5235EVB"
 	select M5235
@@ -191,7 +183,6 @@ source "board/BuS/eb_cpu5282/Kconfig"
 source "board/astro/mcf5373l/Kconfig"
 source "board/cobra5272/Kconfig"
 source "board/freescale/m5208evbe/Kconfig"
-source "board/freescale/m52277evb/Kconfig"
 source "board/freescale/m5235evb/Kconfig"
 source "board/freescale/m5249evb/Kconfig"
 source "board/freescale/m5253demo/Kconfig"
diff --git a/arch/m68k/dts/M52277EVB.dts b/arch/m68k/dts/M52277EVB.dts
deleted file mode 100644
index a2210c88115f..000000000000
--- a/arch/m68k/dts/M52277EVB.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5227x.dtsi"
-
-/ {
-	model = "Freescale M52277EVB";
-	compatible = "fsl,M52277EVB";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&dspi0 {
-	status = "okay";
-};
diff --git a/arch/m68k/dts/M52277EVB_stmicro.dts b/arch/m68k/dts/M52277EVB_stmicro.dts
deleted file mode 100644
index 5fd3ca5efd8e..000000000000
--- a/arch/m68k/dts/M52277EVB_stmicro.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf5227x.dtsi"
-
-/ {
-	model = "Freescale M52277_stmicro";
-	compatible = "fsl,M52277_stmicro";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
diff --git a/arch/m68k/dts/Makefile b/arch/m68k/dts/Makefile
index 49618e64fef6..fdd435bc345e 100644
--- a/arch/m68k/dts/Makefile
+++ b/arch/m68k/dts/Makefile
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-dtb-$(CONFIG_TARGET_M52277EVB) += M52277EVB.dtb \
-	M52277EVB_stmicro.dtb
 dtb-$(CONFIG_TARGET_M5235EVB) += M5235EVB.dtb \
 	M5235EVB_Flash32.dtb
 dtb-$(CONFIG_TARGET_COBRA5272) += cobra5272.dtb
diff --git a/arch/m68k/dts/mcf5227x.dtsi b/arch/m68k/dts/mcf5227x.dtsi
deleted file mode 100644
index 8c95edddb650..000000000000
--- a/arch/m68k/dts/mcf5227x.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/ {
-	compatible = "fsl,mcf5227x";
-
-	aliases {
-		serial0 = &uart0;
-		spi0 = &dspi0;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: uart@fc060000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc060000 0x40>;
-			status = "disabled";
-		};
-
-		uart1: uart@fc064000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc064000 0x40>;
-			status = "disabled";
-		};
-
-		uart2: uart@fc068000 {
-			compatible = "fsl,mcf-uart";
-			reg = <0xfc068000 0x40>;
-			status = "disabled";
-		};
-
-		dspi0: dspi@fc05c000 {
-			compatible = "fsl,mcf-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfc05c000 0x100>;
-			spi-max-frequency = <50000000>;
-			num-cs = <4>;
-			spi-mode = <0>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index 1c04d6df7c51..ceb462f438f2 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -10,7 +10,7 @@
 #define __CACHE_H
 
 #if defined(CONFIG_MCF520x) || defined(CONFIG_MCF523x) || \
-    defined(CONFIG_MCF52x2) || defined(CONFIG_MCF5227x)
+    defined(CONFIG_MCF52x2)
 #define CONFIG_CF_V2
 #endif
 
diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h
index 81837a7c161b..02aa95aaf262 100644
--- a/arch/m68k/include/asm/immap.h
+++ b/arch/m68k/include/asm/immap.h
@@ -32,34 +32,6 @@
 #define CONFIG_SYS_NUM_IRQS		(128)
 #endif				/* CONFIG_M520x */
 
-#ifdef CONFIG_M52277
-#include <asm/immap_5227x.h>
-#include <asm/m5227x.h>
-
-#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
-
-#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
-
-#ifdef CONFIG_LCD
-#define	CONFIG_SYS_LCD_BASE		(MMAP_LCD)
-#endif
-
-/* Timer */
-#ifdef CONFIG_MCFTMR
-#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
-#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
-#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
-#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
-#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT33)
-#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
-#define CONFIG_SYS_TMRINTR_PRI		(6)
-#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
-#endif
-
-#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
-#define CONFIG_SYS_NUM_IRQS		(128)
-#endif				/* CONFIG_M52277 */
-
 #ifdef CONFIG_M5235
 #include <asm/immap_5235.h>
 #include <asm/m5235.h>
diff --git a/arch/m68k/include/asm/immap_5227x.h b/arch/m68k/include/asm/immap_5227x.h
deleted file mode 100644
index 710d6f5c0ddf..000000000000
--- a/arch/m68k/include/asm/immap_5227x.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5227x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __IMMAP_5227X__
-#define __IMMAP_5227X__
-
-/* Module Base Addresses */
-#define MMAP_SCM1	(CONFIG_SYS_MBAR + 0x00000000)
-#define MMAP_XBS	(CONFIG_SYS_MBAR + 0x00004000)
-#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00008000)
-#define MMAP_CAN	(CONFIG_SYS_MBAR + 0x00020000)
-#define MMAP_RTC	(CONFIG_SYS_MBAR + 0x0003C000)
-#define MMAP_SCM2	(CONFIG_SYS_MBAR + 0x00040010)
-#define MMAP_SCM3	(CONFIG_SYS_MBAR + 0x00040070)
-#define MMAP_EDMA	(CONFIG_SYS_MBAR + 0x00044000)
-#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00048000)
-#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x0004C000)
-#define MMAP_IACK	(CONFIG_SYS_MBAR + 0x00054000)
-#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00058000)
-#define MMAP_DSPI	(CONFIG_SYS_MBAR + 0x0005C000)
-#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00060000)
-#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00064000)
-#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00068000)
-#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00070000)
-#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00074000)
-#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00078000)
-#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x0007C000)
-#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00080000)
-#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00084000)
-#define MMAP_PWM	(CONFIG_SYS_MBAR + 0x00090000)
-#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00094000)
-#define MMAP_RCM	(CONFIG_SYS_MBAR + 0x000A0000)
-#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x000A0004)
-#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x000A4000)
-#define MMAP_ADC	(CONFIG_SYS_MBAR + 0x000A8000)
-#define MMAP_LCD	(CONFIG_SYS_MBAR + 0x000AC000)
-#define MMAP_LCD_BGLUT	(CONFIG_SYS_MBAR + 0x000AC800)
-#define MMAP_LCD_GWLUT	(CONFIG_SYS_MBAR + 0x000ACC00)
-#define MMAP_USBHW	(CONFIG_SYS_MBAR + 0x000B0000)
-#define MMAP_USBCAPS	(CONFIG_SYS_MBAR + 0x000B0100)
-#define MMAP_USBEHCI	(CONFIG_SYS_MBAR + 0x000B0140)
-#define MMAP_USBOTG	(CONFIG_SYS_MBAR + 0x000B01A0)
-#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x000B8000)
-#define MMAP_SSI	(CONFIG_SYS_MBAR + 0x000BC000)
-#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x000C0000)
-
-#include <asm/coldfire/crossbar.h>
-#include <asm/coldfire/dspi.h>
-#include <asm/coldfire/edma.h>
-#include <asm/coldfire/eport.h>
-#include <asm/coldfire/flexbus.h>
-#include <asm/coldfire/flexcan.h>
-#include <asm/coldfire/intctrl.h>
-#include <asm/coldfire/lcd.h>
-#include <asm/coldfire/pwm.h>
-#include <asm/coldfire/ssi.h>
-
-/* Reset Controller Module (RCM) */
-typedef struct rcm {
-	u8 rcr;
-	u8 rsr;
-} rcm_t;
-
-/* Chip Configuration Module (CCM) */
-typedef struct ccm {
-	u16 ccr;		/* Chip Configuration (Rd-only) */
-	u16 resv1;
-	u16 rcon;		/* Reset Configuration (Rd-only) */
-	u16 cir;		/* Chip Identification (Rd-only) */
-	u32 resv2;
-	u16 misccr;		/* Miscellaneous Control */
-	u16 cdr;		/* Clock Divider */
-	u16 uocsr;		/* USB On-the-Go Controller Status */
-	u16 resv4;
-	u16 sbfsr;		/* Serial Boot Status */
-	u16 sbfcr;		/* Serial Boot Control */
-} ccm_t;
-
-typedef struct canex_ctrl {
-	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
-	u32 res0[0x700];	/* 0x100 */
-	can_msg_t rxim[16];	/* 0x800 Rx Individual Mask 0-15 */
-} canex_t;
-
-/* General Purpose I/O Module (GPIO) */
-typedef struct gpio {
-	/* Port Output Data Registers */
-	u8 podr_be;		/* 0x00 */
-	u8 podr_cs;		/* 0x01 */
-	u8 podr_fbctl;		/* 0x02 */
-	u8 podr_i2c;		/* 0x03 */
-	u8 rsvd1;		/* 0x04 */
-	u8 podr_uart;		/* 0x05 */
-	u8 podr_dspi;		/* 0x06 */
-	u8 podr_timer;		/* 0x07 */
-	u8 podr_lcdctl;		/* 0x08 */
-	u8 podr_lcddatah;	/* 0x09 */
-	u8 podr_lcddatam;	/* 0x0A */
-	u8 podr_lcddatal;	/* 0x0B */
-
-	/* Port Data Direction Registers */
-	u8 pddr_be;		/* 0x0C */
-	u8 pddr_cs;		/* 0x0D */
-	u8 pddr_fbctl;		/* 0x0E */
-	u8 pddr_i2c;		/* 0x0F */
-	u8 rsvd2;		/* 0x10 */
-	u8 pddr_uart;		/* 0x11 */
-	u8 pddr_dspi;		/* 0x12 */
-	u8 pddr_timer;		/* 0x13 */
-	u8 pddr_lcdctl;		/* 0x14 */
-	u8 pddr_lcddatah;	/* 0x15 */
-	u8 pddr_lcddatam;	/* 0x16 */
-	u8 pddr_lcddatal;	/* 0x17 */
-
-	/* Port Pin Data/Set Data Registers */
-	u8 ppdsdr_be;		/* 0x18 */
-	u8 ppdsdr_cs;		/* 0x19 */
-	u8 ppdsdr_fbctl;	/* 0x1A */
-	u8 ppdsdr_i2c;		/* 0x1B */
-	u8 rsvd3;		/* 0x1C */
-	u8 ppdsdr_uart;		/* 0x1D */
-	u8 ppdsdr_dspi;		/* 0x1E */
-	u8 ppdsdr_timer;	/* 0x1F */
-	u8 ppdsdr_lcdctl;	/* 0x20 */
-	u8 ppdsdr_lcddatah;	/* 0x21 */
-	u8 ppdsdr_lcddatam;	/* 0x22 */
-	u8 ppdsdr_lcddatal;	/* 0x23 */
-
-	/* Port Clear Output Data Registers */
-	u8 pclrr_be;		/* 0x24 */
-	u8 pclrr_cs;		/* 0x25 */
-	u8 pclrr_fbctl;		/* 0x26 */
-	u8 pclrr_i2c;		/* 0x27 */
-	u8 rsvd4;		/* 0x28 */
-	u8 pclrr_uart;		/* 0x29 */
-	u8 pclrr_dspi;		/* 0x2A */
-	u8 pclrr_timer;		/* 0x2B */
-	u8 pclrr_lcdctl;	/* 0x2C */
-	u8 pclrr_lcddatah;	/* 0x2D */
-	u8 pclrr_lcddatam;	/* 0x2E */
-	u8 pclrr_lcddatal;	/* 0x2F */
-
-	/* Pin Assignment Registers */
-	u8 par_be;		/* 0x30 */
-	u8 par_cs;		/* 0x31 */
-	u8 par_fbctl;		/* 0x32 */
-	u8 par_i2c;		/* 0x33 */
-	u16 par_uart;		/* 0x34 */
-	u8 par_dspi;		/* 0x36 */
-	u8 par_timer;		/* 0x37 */
-	u8 par_lcdctl;		/* 0x38 */
-	u8 par_irq;		/* 0x39 */
-	u16 rsvd6;		/* 0x3A - 0x3B */
-	u32 par_lcdh;		/* 0x3C */
-	u32 par_lcdl;		/* 0x40 */
-
-	/* Mode select control registers */
-	u8 mscr_fb;		/* 0x44 */
-	u8 mscr_sdram;		/* 0x45 */
-
-	u16 rsvd7;		/* 0x46 - 0x47 */
-	u8 dscr_dspi;		/* 0x48 */
-	u8 dscr_timer;		/* 0x49 */
-	u8 dscr_i2c;		/* 0x4A */
-	u8 dscr_lcd;		/* 0x4B */
-	u8 dscr_debug;		/* 0x4C */
-	u8 dscr_clkrst;		/* 0x4D */
-	u8 dscr_irq;		/* 0x4E */
-	u8 dscr_uart;		/* 0x4F */
-} gpio_t;
-
-/* SDRAM Controller (SDRAMC) */
-typedef struct sdramc {
-	u32 sdmr;		/* Mode/Extended Mode */
-	u32 sdcr;		/* Control */
-	u32 sdcfg1;		/* Configuration 1 */
-	u32 sdcfg2;		/* Chip Select */
-	u8 resv0[0x100];
-	u32 sdcs0;		/* Mode/Extended Mode */
-	u32 sdcs1;		/* Mode/Extended Mode */
-} sdramc_t;
-
-/* Phase Locked Loop (PLL) */
-typedef struct pll {
-	u32 pcr;		/* PLL Control */
-	u32 psr;		/* PLL Status */
-} pll_t;
-
-/* System Control Module register  */
-typedef struct scm1 {
-	u32 mpr;		/* 0x00 Master Privilege */
-	u32 rsvd1[7];
-	u32 pacra;		/* 0x20 */
-	u32 pacrb;		/* 0x24 */
-	u32 pacrc;		/* 0x28 */
-	u32 pacrd;		/* 0x2C */
-	u32 rsvd2[4];
-	u32 pacre;		/* 0x40 */
-	u32 pacrf;		/* 0x44 */
-	u32 pacrg;		/* 0x48 */
-	u32 rsvd3;
-	u32 pacri;		/* 0x50 */
-} scm1_t;
-
-typedef struct scm2_ctrl {
-	u8 res1[3];		/* 0x00 - 0x02 */
-	u8 wcr;			/* 0x03 wakeup control */
-	u16 res2;		/* 0x04 - 0x05 */
-	u16 cwcr;		/* 0x06 Core Watchdog Control */
-	u8 res3[3];		/* 0x08 - 0x0A */
-	u8 cwsr;		/* 0x0B Core Watchdog Service */
-	u8 res4[2];		/* 0x0C - 0x0D */
-	u8 scmisr;		/* 0x0F Interrupt Status */
-	u32 res5;		/* 0x20 */
-	u32 bcr;		/* 0x24 Burst Configuration */
-} scm2_t;
-
-typedef struct scm3_ctrl {
-	u32 cfadr;		/* 0x00 Core Fault Address */
-	u8 res7;		/* 0x04 */
-	u8 cfier;		/* 0x05 Core Fault Interrupt Enable */
-	u8 cfloc;		/* 0x06 Core Fault Location */
-	u8 cfatr;		/* 0x07 Core Fault Attributes */
-	u32 cfdtr;		/* 0x08 Core Fault Data */
-} scm3_t;
-
-typedef struct rtcex {
-	u32 rsvd1[3];
-	u32 gocu;
-	u32 gocl;
-} rtcex_t;
-#endif				/* __IMMAP_5227X__ */
diff --git a/arch/m68k/include/asm/m5227x.h b/arch/m68k/include/asm/m5227x.h
deleted file mode 100644
index 67c16e0b90f3..000000000000
--- a/arch/m68k/include/asm/m5227x.h
+++ /dev/null
@@ -1,546 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF5227x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#ifndef __MCF5227X__
-#define __MCF5227X__
-
-/* Interrupt Controller (INTC) */
-#define INT0_LO_RSVD0			(0)
-#define INT0_LO_EPORT1			(1)
-#define INT0_LO_EPORT4			(4)
-#define INT0_LO_EPORT7			(7)
-#define INT0_LO_EDMA_00			(8)
-#define INT0_LO_EDMA_01			(9)
-#define INT0_LO_EDMA_02			(10)
-#define INT0_LO_EDMA_03			(11)
-#define INT0_LO_EDMA_04			(12)
-#define INT0_LO_EDMA_05			(13)
-#define INT0_LO_EDMA_06			(14)
-#define INT0_LO_EDMA_07			(15)
-#define INT0_LO_EDMA_08			(16)
-#define INT0_LO_EDMA_09			(17)
-#define INT0_LO_EDMA_10			(18)
-#define INT0_LO_EDMA_11			(19)
-#define INT0_LO_EDMA_12			(20)
-#define INT0_LO_EDMA_13			(21)
-#define INT0_LO_EDMA_14			(22)
-#define INT0_LO_EDMA_15			(23)
-#define INT0_LO_EDMA_ERR		(24)
-#define INT0_LO_SCM_CWIC		(25)
-#define INT0_LO_UART0			(26)
-#define INT0_LO_UART1			(27)
-#define INT0_LO_UART2			(28)
-#define INT0_LO_I2C			(30)
-#define INT0_LO_DSPI			(31)
-#define INT0_HI_DTMR0			(32)
-#define INT0_HI_DTMR1			(33)
-#define INT0_HI_DTMR2			(34)
-#define INT0_HI_DTMR3			(35)
-#define INT0_HI_SCMIR			(62)
-#define INT0_HI_RTC_ISR			(63)
-
-#define INT1_HI_CAN_BOFFINT		(1)
-#define INT1_HI_CAN_ERRINT		(3)
-#define INT1_HI_CAN_BUF0I		(4)
-#define INT1_HI_CAN_BUF1I		(5)
-#define INT1_HI_CAN_BUF2I		(6)
-#define INT1_HI_CAN_BUF3I		(7)
-#define INT1_HI_CAN_BUF4I		(8)
-#define INT1_HI_CAN_BUF5I		(9)
-#define INT1_HI_CAN_BUF6I		(10)
-#define INT1_HI_CAN_BUF7I		(11)
-#define INT1_HI_CAN_BUF8I		(12)
-#define INT1_HI_CAN_BUF9I		(13)
-#define INT1_HI_CAN_BUF10I		(14)
-#define INT1_HI_CAN_BUF11I		(15)
-#define INT1_HI_CAN_BUF12I		(16)
-#define INT1_HI_CAN_BUF13I		(17)
-#define INT1_HI_CAN_BUF14I		(18)
-#define INT1_HI_CAN_BUF15I		(19)
-#define INT1_HI_PIT0_PIF		(43)
-#define INT1_HI_PIT1_PIF		(44)
-#define INT1_HI_USBOTG_STS		(47)
-#define INT1_HI_SSI_ISR			(49)
-#define INT1_HI_PWM_INT			(50)
-#define INT1_HI_LCDC_ISR		(51)
-#define INT1_HI_CCM_UOCSR		(53)
-#define INT1_HI_DSPI_EOQF		(54)
-#define INT1_HI_DSPI_TFFF		(55)
-#define INT1_HI_DSPI_TCF		(56)
-#define INT1_HI_DSPI_TFUF		(57)
-#define INT1_HI_DSPI_RFDF		(58)
-#define INT1_HI_DSPI_RFOF		(59)
-#define INT1_HI_DSPI_RFOF_TFUF		(60)
-#define INT1_HI_TOUCH_ADC		(61)
-#define INT1_HI_PLL_LOCKS		(62)
-
-/*********************************************************************
-* Reset Controller Module (RCM)
-*********************************************************************/
-
-/* Bit definitions and macros for RCR */
-#define RCM_RCR_FRCRSTOUT		(0x40)
-#define RCM_RCR_SOFTRST			(0x80)
-
-/* Bit definitions and macros for RSR */
-#define RCM_RSR_LOL			(0x01)
-#define RCM_RSR_WDR_CORE		(0x02)
-#define RCM_RSR_EXT			(0x04)
-#define RCM_RSR_POR			(0x08)
-#define RCM_RSR_SOFT			(0x20)
-
-/*********************************************************************
-* Chip Configuration Module (CCM)
-*********************************************************************/
-
-/* Bit definitions and macros for CCR */
-#define CCM_CCR_DRAMSEL			(0x0100)
-#define CCM_CCR_CSC_UNMASK		(0xFF3F)
-#define CCM_CCR_CSC_FBCS5_CS4		(0x00C0)
-#define CCM_CCR_CSC_FBCS5_A22		(0x0080)
-#define CCM_CCR_CSC_FB_A23_A22		(0x0040)
-#define CCM_CCR_LIMP			(0x0020)
-#define CCM_CCR_LOAD			(0x0010)
-#define CCM_CCR_BOOTPS_UNMASK		(0xFFF3)
-#define CCM_CCR_BOOTPS_PS16		(0x0008)
-#define CCM_CCR_BOOTPS_PS8		(0x0004)
-#define CCM_CCR_BOOTPS_PS32		(0x0000)
-#define CCM_CCR_OSCMODE_OSCBYPASS	(0x0002)
-
-/* Bit definitions and macros for RCON */
-#define CCM_RCON_CSC_UNMASK		(0xFF3F)
-#define CCM_RCON_CSC_FBCS5_CS4		(0x00C0)
-#define CCM_RCON_CSC_FBCS5_A22		(0x0080)
-#define CCM_RCON_CSC_FB_A23_A22		(0x0040)
-#define CCM_RCON_LIMP			(0x0020)
-#define CCM_RCON_LOAD			(0x0010)
-#define CCM_RCON_BOOTPS_UNMASK		(0xFFF3)
-#define CCM_RCON_BOOTPS_PS16		(0x0008)
-#define CCM_RCON_BOOTPS_PS8		(0x0004)
-#define CCM_RCON_BOOTPS_PS32		(0x0000)
-#define CCM_RCON_OSCMODE_OSCBYPASS	(0x0002)
-
-/* Bit definitions and macros for CIR */
-#define CCM_CIR_PIN(x)			(((x) & 0xFFC0) >> 6)
-#define CCM_CIR_PRN(x)			((x) & 0x003F)
-#define CCM_CIR_PIN_MCF52277		(0x0000)
-
-/* Bit definitions and macros for MISCCR */
-#define CCM_MISCCR_RTCSRC		(0x4000)
-#define CCM_MISCCR_USBPUE		(0x2000)	/* USB transceiver pull-up */
-#define CCM_MISCCR_LIMP			(0x1000)	/* Limp mode enable */
-
-#define CCM_MISCCR_BME			(0x0800)	/* Bus monitor ext en bit */
-#define CCM_MISCCR_BMT_65536		(0)
-#define CCM_MISCCR_BMT_32768		(1)
-#define CCM_MISCCR_BMT_16384		(2)
-#define CCM_MISCCR_BMT_8192		(3)
-#define CCM_MISCCR_BMT_4096		(4)
-#define CCM_MISCCR_BMT_2048		(5)
-#define CCM_MISCCR_BMT_1024		(6)
-#define CCM_MISCCR_BMT_512		(7)
-
-#define CCM_MISCCR_SSIPUE		(0x0080)	/* SSI RXD/TXD pull enable */
-#define CCM_MISCCR_SSIPUS		(0x0040)	/* SSI RXD/TXD pull select */
-#define CCM_MISCCR_TIMDMA		(0x0020)	/* Timer DMA mux selection */
-#define CCM_MISCCR_SSISRC		(0x0010)	/* SSI clock source */
-#define CCM_MISCCR_LCDCHEN		(0x0004)	/* LCD Int CLK en */
-#define CCM_MISCCR_USBOC		(0x0002)	/* USB VBUS over-current sense pol */
-#define CCM_MISCCR_USBSRC		(0x0001)	/* USB clock source */
-
-/* Bit definitions and macros for CDR */
-#define CCM_CDR_USBDIV(x)		(((x)&0x0003)<<12)
-#define CCM_CDR_LPDIV(x)		(((x)&0x000F)<<8)	/* Low power clk div */
-#define CCM_CDR_SSIDIV(x)		(((x)&0x00FF))	/* SSI oversampling clk div */
-
-/* Bit definitions and macros for UOCSR */
-#define CCM_UOCSR_DPPD			(0x2000)	/* D+ 15Kohm pull-down (rd-only) */
-#define CCM_UOCSR_DMPD			(0x1000)	/* D- 15Kohm pull-down (rd-only) */
-#define CCM_UOCSR_CRG_VBUS		(0x0400)	/* VBUS charge resistor enabled (rd-only) */
-#define CCM_UOCSR_DCR_VBUS		(0x0200)	/* VBUS discharge resistor en (rd-only) */
-#define CCM_UOCSR_DPPU			(0x0100)	/* D+ pull-up for FS enabled (rd-only) */
-#define CCM_UOCSR_AVLD			(0x0080)	/* A-peripheral valid indicator */
-#define CCM_UOCSR_BVLD			(0x0040)	/* B-peripheral valid indicator */
-#define CCM_UOCSR_VVLD			(0x0020)	/* VBUS valid indicator */
-#define CCM_UOCSR_SEND			(0x0010)	/* Session end */
-#define CCM_UOCSR_WKUP			(0x0004)	/* USB OTG controller wake-up event */
-#define CCM_UOCSR_UOMIE			(0x0002)	/* USB OTG misc interrupt en */
-#define CCM_UOCSR_XPDE			(0x0001)	/* On-chip transceiver pull-down en */
-
-/*********************************************************************
-* General Purpose I/O Module (GPIO)
-*********************************************************************/
-/* Bit definitions and macros for PAR_BE */
-#define GPIO_PAR_BE_UNMASK		(0x0F)
-#define GPIO_PAR_BE_BE3_BE3		(0x08)
-#define GPIO_PAR_BE_BE3_GPIO		(0x00)
-#define GPIO_PAR_BE_BE2_BE2		(0x04)
-#define GPIO_PAR_BE_BE2_GPIO		(0x00)
-#define GPIO_PAR_BE_BE1_BE1		(0x02)
-#define GPIO_PAR_BE_BE1_GPIO		(0x00)
-#define GPIO_PAR_BE_BE0_BE0		(0x01)
-#define GPIO_PAR_BE_BE0_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_CS */
-#define GPIO_PAR_CS_CS3			(0x10)
-#define GPIO_PAR_CS_CS2			(0x08)
-#define GPIO_PAR_CS_CS1_FBCS1		(0x06)
-#define GPIO_PAR_CS_CS1_SDCS1		(0x04)
-#define GPIO_PAR_CS_CS1_GPIO		(0x00)
-#define GPIO_PAR_CS_CS0			(0x01)
-
-/* Bit definitions and macros for PAR_FBCTL */
-#define GPIO_PAR_FBCTL_OE		(0x80)
-#define GPIO_PAR_FBCTL_TA		(0x40)
-#define GPIO_PAR_FBCTL_RW		(0x20)
-#define GPIO_PAR_FBCTL_TS_UNMASK	(0xE7)
-#define GPIO_PAR_FBCTL_TS_FBTS		(0x18)
-#define GPIO_PAR_FBCTL_TS_DMAACK	(0x10)
-#define GPIO_PAR_FBCTL_TS_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_FECI2C */
-#define GPIO_PAR_I2C_SCL_UNMASK		(0xF3)
-#define GPIO_PAR_I2C_SCL_SCL		(0x0C)
-#define GPIO_PAR_I2C_SCL_CANTXD		(0x08)
-#define GPIO_PAR_I2C_SCL_U2TXD		(0x04)
-#define GPIO_PAR_I2C_SCL_GPIO		(0x00)
-
-#define GPIO_PAR_I2C_SDA_UNMASK		(0xFC)
-#define GPIO_PAR_I2C_SDA_SDA		(0x03)
-#define GPIO_PAR_I2C_SDA_CANRXD		(0x02)
-#define GPIO_PAR_I2C_SDA_U2RXD		(0x01)
-#define GPIO_PAR_I2C_SDA_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_UART */
-#define GPIO_PAR_UART_U1CTS_UNMASK	(0x3FFF)
-#define GPIO_PAR_UART_U1CTS_U1CTS	(0xC000)
-#define GPIO_PAR_UART_U1CTS_SSIBCLK	(0x8000)
-#define GPIO_PAR_UART_U1CTS_LCDCLS	(0x4000)
-#define GPIO_PAR_UART_U1CTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U1RTS_UNMASK	(0xCFFF)
-#define GPIO_PAR_UART_U1RTS_U1RTS	(0x3000)
-#define GPIO_PAR_UART_U1RTS_SSIFS	(0x2000)
-#define GPIO_PAR_UART_U1RTS_LCDPS	(0x1000)
-#define GPIO_PAR_UART_U1RTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U1RXD_UNMASK	(0xF3FF)
-#define GPIO_PAR_UART_U1RXD_U1RXD	(0x0C00)
-#define GPIO_PAR_UART_U1RXD_SSIRXD	(0x0800)
-#define GPIO_PAR_UART_U1RXD_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U1TXD_UNMASK	(0xFCFF)
-#define GPIO_PAR_UART_U1TXD_U1TXD	(0x0300)
-#define GPIO_PAR_UART_U1TXD_SSITXD	(0x0200)
-#define GPIO_PAR_UART_U1TXD_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0CTS_UNMASK	(0xFF3F)
-#define GPIO_PAR_UART_U0CTS_U0CTS	(0x00C0)
-#define GPIO_PAR_UART_U0CTS_T1OUT	(0x0080)
-#define GPIO_PAR_UART_U0CTS_USBVBUSEN	(0x0040)
-#define GPIO_PAR_UART_U0CTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0RTS_UNMASK	(0xFFCF)
-#define GPIO_PAR_UART_U0RTS_U0RTS	(0x0030)
-#define GPIO_PAR_UART_U0RTS_T1IN	(0x0020)
-#define GPIO_PAR_UART_U0RTS_USBVBUSOC	(0x0010)
-#define GPIO_PAR_UART_U0RTS_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0RXD_UNMASK	(0xFFF3)
-#define GPIO_PAR_UART_U0RXD_U0RXD	(0x000C)
-#define GPIO_PAR_UART_U0RXD_CANRX	(0x0008)
-#define GPIO_PAR_UART_U0RXD_GPIO	(0x0000)
-
-#define GPIO_PAR_UART_U0TXD_UNMASK	(0xFFFC)
-#define GPIO_PAR_UART_U0TXD_U0TXD	(0x0003)
-#define GPIO_PAR_UART_U0TXD_CANTX	(0x0002)
-#define GPIO_PAR_UART_U0TXD_GPIO	(0x0000)
-
-/* Bit definitions and macros for PAR_DSPI */
-#define GPIO_PAR_DSPI_PCS0_UNMASK	(0x3F)
-#define GPIO_PAR_DSPI_PCS0_PCS0		(0xC0)
-#define GPIO_PAR_DSPI_PCS0_U2RTS	(0x80)
-#define GPIO_PAR_DSPI_PCS0_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SIN_UNMASK	(0xCF)
-#define GPIO_PAR_DSPI_SIN_SIN		(0x30)
-#define GPIO_PAR_DSPI_SIN_U2RXD		(0x20)
-#define GPIO_PAR_DSPI_SIN_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SOUT_UNMASK	(0xF3)
-#define GPIO_PAR_DSPI_SOUT_SOUT		(0x0C)
-#define GPIO_PAR_DSPI_SOUT_U2TXD	(0x08)
-#define GPIO_PAR_DSPI_SOUT_GPIO		(0x00)
-#define GPIO_PAR_DSPI_SCK_UNMASK	(0xFC)
-#define GPIO_PAR_DSPI_SCK_SCK		(0x03)
-#define GPIO_PAR_DSPI_SCK_U2CTS		(0x02)
-#define GPIO_PAR_DSPI_SCK_GPIO		(0x00)
-
-/* Bit definitions and macros for PAR_TIMER */
-#define GPIO_PAR_TIMER_T3IN_UNMASK	(0x3F)
-#define GPIO_PAR_TIMER_T3IN_T3IN	(0xC0)
-#define GPIO_PAR_TIMER_T3IN_T3OUT	(0x80)
-#define GPIO_PAR_TIMER_T3IN_SSIMCLK	(0x40)
-#define GPIO_PAR_TIMER_T3IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T2IN_UNMASK	(0xCF)
-#define GPIO_PAR_TIMER_T2IN_T2IN	(0x30)
-#define GPIO_PAR_TIMER_T2IN_T2OUT	(0x20)
-#define GPIO_PAR_TIMER_T2IN_DSPIPCS2	(0x10)
-#define GPIO_PAR_TIMER_T2IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T1IN_UNMASK	(0xF3)
-#define GPIO_PAR_TIMER_T1IN_T1IN	(0x0C)
-#define GPIO_PAR_TIMER_T1IN_T1OUT	(0x08)
-#define GPIO_PAR_TIMER_T1IN_LCDCONTRAST	(0x04)
-#define GPIO_PAR_TIMER_T1IN_GPIO	(0x00)
-#define GPIO_PAR_TIMER_T0IN_UNMASK	(0xFC)
-#define GPIO_PAR_TIMER_T0IN_T0IN	(0x03)
-#define GPIO_PAR_TIMER_T0IN_T0OUT	(0x02)
-#define GPIO_PAR_TIMER_T0IN_LCDREV	(0x01)
-#define GPIO_PAR_TIMER_T0IN_GPIO	(0x00)
-
-/* Bit definitions and macros for GPIO_PAR_LCDCTL */
-#define GPIO_PAR_LCDCTL_ACDOE_UNMASK	(0xE7)
-#define GPIO_PAR_LCDCTL_ACDOE_ACDOE	(0x18)
-#define GPIO_PAR_LCDCTL_ACDOE_SPLSPR	(0x10)
-#define GPIO_PAR_LCDCTL_ACDOE_GPIO	(0x00)
-#define GPIO_PAR_LCDCTL_FLM_VSYNC	(0x04)
-#define GPIO_PAR_LCDCTL_LP_HSYNC	(0x02)
-#define GPIO_PAR_LCDCTL_LSCLK		(0x01)
-
-/* Bit definitions and macros for PAR_IRQ */
-#define GPIO_PAR_IRQ_IRQ4_UNMASK	(0xF3)
-#define GPIO_PAR_IRQ_IRQ4_SSIINPCLK	(0x0C)
-#define GPIO_PAR_IRQ_IRQ4_DMAREQ0	(0x08)
-#define GPIO_PAR_IRQ_IRQ4_GPIO		(0x00)
-#define GPIO_PAR_IRQ_IRQ1_UNMASK	(0xFC)
-#define GPIO_PAR_IRQ_IRQ1_PCIINT	(0x03)
-#define GPIO_PAR_IRQ_IRQ1_USBCLKIN	(0x02)
-#define GPIO_PAR_IRQ_IRQ1_SSICLKIN	(0x01)
-#define GPIO_PAR_IRQ_IRQ1_GPIO		(0x00)
-
-/* Bit definitions and macros for GPIO_PAR_LCDH */
-#define GPIO_PAR_LCDH_LD17_UNMASK	(0xFFFFF3FF)
-#define GPIO_PAR_LCDH_LD17_LD17		(0x00000C00)
-#define GPIO_PAR_LCDH_LD17_LD11		(0x00000800)
-#define GPIO_PAR_LCDH_LD17_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD16_UNMASK	(0xFFFFFCFF)
-#define GPIO_PAR_LCDH_LD16_LD16		(0x00000300)
-#define GPIO_PAR_LCDH_LD16_LD10		(0x00000200)
-#define GPIO_PAR_LCDH_LD16_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD15_UNMASK	(0xFFFFFF3F)
-#define GPIO_PAR_LCDH_LD15_LD15		(0x000000C0)
-#define GPIO_PAR_LCDH_LD15_LD9		(0x00000080)
-#define GPIO_PAR_LCDH_LD15_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD14_UNMASK	(0xFFFFFFCF)
-#define GPIO_PAR_LCDH_LD14_LD14		(0x00000030)
-#define GPIO_PAR_LCDH_LD14_LD8		(0x00000020)
-#define GPIO_PAR_LCDH_LD14_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD13_UNMASK	(0xFFFFFFF3)
-#define GPIO_PAR_LCDH_LD13_LD13		(0x0000000C)
-#define GPIO_PAR_LCDH_LD13_CANTX	(0x00000008)
-#define GPIO_PAR_LCDH_LD13_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDH_LD12_UNMASK	(0xFFFFFFFC)
-#define GPIO_PAR_LCDH_LD12_LD12		(0x00000003)
-#define GPIO_PAR_LCDH_LD12_CANRX	(0x00000002)
-#define GPIO_PAR_LCDH_LD12_GPIO		(0x00000000)
-
-/* Bit definitions and macros for GPIO_PAR_LCDL */
-#define GPIO_PAR_LCDL_LD11_UNMASK	(0x3FFFFFFF)
-#define GPIO_PAR_LCDL_LD11_LD11		(0xC0000000)
-#define GPIO_PAR_LCDL_LD11_LD7		(0x80000000)
-#define GPIO_PAR_LCDL_LD11_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD10_UNMASK	(0xCFFFFFFF)
-#define GPIO_PAR_LCDL_LD10_LD10		(0x30000000)
-#define GPIO_PAR_LCDL_LD10_LD6		(0x20000000)
-#define GPIO_PAR_LCDL_LD10_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD9_UNMASK	(0xF3FFFFFF)
-#define GPIO_PAR_LCDL_LD9_LD9		(0x0C000000)
-#define GPIO_PAR_LCDL_LD9_LD5		(0x08000000)
-#define GPIO_PAR_LCDL_LD9_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD8_UNMASK	(0xFCFFFFFF)
-#define GPIO_PAR_LCDL_LD8_LD8		(0x03000000)
-#define GPIO_PAR_LCDL_LD8_LD4		(0x02000000)
-#define GPIO_PAR_LCDL_LD8_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD7_UNMASK	(0xFF3FFFFF)
-#define GPIO_PAR_LCDL_LD7_LD7		(0x00C00000)
-#define GPIO_PAR_LCDL_LD7_PWM7		(0x00800000)
-#define GPIO_PAR_LCDL_LD7_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD6_UNMASK	(0xFFCFFFFF)
-#define GPIO_PAR_LCDL_LD6_LD6		(0x00300000)
-#define GPIO_PAR_LCDL_LD6_PWM5		(0x00200000)
-#define GPIO_PAR_LCDL_LD6_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD5_UNMASK	(0xFFF3FFFF)
-#define GPIO_PAR_LCDL_LD5_LD5		(0x000C0000)
-#define GPIO_PAR_LCDL_LD5_LD3		(0x00080000)
-#define GPIO_PAR_LCDL_LD5_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD4_UNMASK	(0xFFFCFFFF)
-#define GPIO_PAR_LCDL_LD4_LD4		(0x00030000)
-#define GPIO_PAR_LCDL_LD4_LD2		(0x00020000)
-#define GPIO_PAR_LCDL_LD4_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD3_UNMASK	(0xFFFF3FFF)
-#define GPIO_PAR_LCDL_LD3_LD3		(0x0000C000)
-#define GPIO_PAR_LCDL_LD3_LD1		(0x00008000)
-#define GPIO_PAR_LCDL_LD3_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD2_UNMASK	(0xFFFFCFFF)
-#define GPIO_PAR_LCDL_LD2_LD2		(0x00003000)
-#define GPIO_PAR_LCDL_LD2_LD0		(0x00002000)
-#define GPIO_PAR_LCDL_LD2_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD1_UNMASK	(0xFFFFF3FF)
-#define GPIO_PAR_LCDL_LD1_LD1		(0x00000C00)
-#define GPIO_PAR_LCDL_LD1_PWM3		(0x00000800)
-#define GPIO_PAR_LCDL_LD1_GPIO		(0x00000000)
-
-#define GPIO_PAR_LCDL_LD0_UNMASK	(0xFFFFFCFF)
-#define GPIO_PAR_LCDL_LD0_LD0		(0x00000300)
-#define GPIO_PAR_LCDL_LD0_PWM1		(0x00000200)
-#define GPIO_PAR_LCDL_LD0_GPIO		(0x00000000)
-
-/* Bit definitions and macros for MSCR_FB */
-#define GPIO_MSCR_FB_DUPPER_UNMASK	(0xCF)
-#define GPIO_MSCR_FB_DUPPER_25V_33V	(0x30)
-#define GPIO_MSCR_FB_DUPPER_FULL_18V	(0x20)
-#define GPIO_MSCR_FB_DUPPER_OD		(0x10)
-#define GPIO_MSCR_FB_DUPPER_HALF_18V	(0x00)
-
-#define GPIO_MSCR_FB_DLOWER_UNMASK	(0xF3)
-#define GPIO_MSCR_FB_DLOWER_25V_33V	(0x0C)
-#define GPIO_MSCR_FB_DLOWER_FULL_18V	(0x08)
-#define GPIO_MSCR_FB_DLOWER_OD		(0x04)
-#define GPIO_MSCR_FB_DLOWER_HALF_18V	(0x00)
-
-#define GPIO_MSCR_FB_ADDRCTL_UNMASK	(0xFC)
-#define GPIO_MSCR_FB_ADDRCTL_25V_33V	(0x03)
-#define GPIO_MSCR_FB_ADDRCTL_FULL_18V	(0x02)
-#define GPIO_MSCR_FB_ADDRCTL_OD		(0x01)
-#define GPIO_MSCR_FB_ADDRCTL_HALF_18V	(0x00)
-
-/* Bit definitions and macros for MSCR_SDRAM */
-#define GPIO_MSCR_SDRAM_SDCLKB_UNMASK	(0xCF)
-#define GPIO_MSCR_SDRAM_SDCLKB_25V_33V	(0x30)
-#define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V	(0x20)
-#define GPIO_MSCR_SDRAM_SDCLKB_OD	(0x10)
-#define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V	(0x00)
-
-#define GPIO_MSCR_SDRAM_SDCLK_UNMASK	(0xF3)
-#define GPIO_MSCR_SDRAM_SDCLK_25V_33V	(0x0C)
-#define GPIO_MSCR_SDRAM_SDCLK_FULL_18V	(0x08)
-#define GPIO_MSCR_SDRAM_SDCLK_OPD	(0x04)
-#define GPIO_MSCR_SDRAM_SDCLK_HALF_18V	(0x00)
-
-#define GPIO_MSCR_SDRAM_SDCTL_UNMASK	(0xFC)
-#define GPIO_MSCR_SDRAM_SDCTL_25V_33V	(0x03)
-#define GPIO_MSCR_SDRAM_SDCTL_FULL_18V	(0x02)
-#define GPIO_MSCR_SDRAM_SDCTL_OPD	(0x01)
-#define GPIO_MSCR_SDRAM_SDCTL_HALF_18V	(0x00)
-
-/* Bit definitions and macros for Drive Strength Control */
-#define DSCR_LOAD_50PF	(0x03)
-#define DSCR_LOAD_30PF	(0x02)
-#define DSCR_LOAD_20PF	(0x01)
-#define DSCR_LOAD_10PF	(0x00)
-
-/*********************************************************************
-* SDRAM Controller (SDRAMC)
-*********************************************************************/
-
-/* Bit definitions and macros for SDMR */
-#define SDRAMC_SDMR_DDR2_AD(x)		(((x)&0x00003FFF))	/* Address for DDR2 */
-#define SDRAMC_SDMR_CMD			(0x00010000)	/* Command */
-#define SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)	/* Address */
-#define SDRAMC_SDMR_BK(x)		(((x)&0x00000003)<<30)	/* Bank Address */
-#define SDRAMC_SDMR_BK_LMR		(0x00000000)
-#define SDRAMC_SDMR_BK_LEMR		(0x40000000)
-
-/* Bit definitions and macros for SDCR */
-#define SDRAMC_SDCR_DPD			(0x00000001)	/* Deep Power-Down Mode */
-#define SDRAMC_SDCR_IPALL		(0x00000002)	/* Initiate Precharge All */
-#define SDRAMC_SDCR_IREF		(0x00000004)	/* Initiate Refresh */
-#define SDRAMC_SDCR_DQS_OE(x)		(((x)&0x00000003)<<10)	/* DQS Output Enable */
-#define SDRAMC_SDCR_MEM_PS		(0x00002000)	/* Data Port Size */
-#define SDRAMC_SDCR_REF_CNT(x)		(((x)&0x0000003F)<<16)	/* Periodic Refresh Counter */
-#define SDRAMC_SDCR_OE_RULE		(0x00400000)	/* Drive Rule Selection */
-#define SDRAMC_SDCR_ADDR_MUX(x)		(((x)&0x00000003)<<24)	/* Internal Address Mux Select */
-#define SDRAMC_SDCR_DDR2_MODE		(0x08000000)	/* DDR2 Mode Select */
-#define SDRAMC_SDCR_REF_EN		(0x10000000)	/* Refresh Enable */
-#define SDRAMC_SDCR_DDR_MODE		(0x20000000)	/* DDR Mode Select */
-#define SDRAMC_SDCR_CKE			(0x40000000)	/* Clock Enable */
-#define SDRAMC_SDCR_MODE_EN		(0x80000000)	/* SDRAM Mode Register Programming Enable */
-#define SDRAMC_SDCR_DQS_OE_BOTH		(0x00000C000)
-
-/* Bit definitions and macros for SDCFG1 */
-#define SDRAMC_SDCFG1_WT_LAT(x)		(((x)&0x00000007)<<4)	/* Write Latency */
-#define SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)	/* Refresh to active delay */
-#define SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)	/* Precharge to active delay */
-#define SDRAMC_SDCFG1_ACT2RW(x)		(((x)&0x00000007)<<16)	/* Active to read/write delay */
-#define SDRAMC_SDCFG1_RD_LAT(x)		(((x)&0x0000000F)<<20)	/* Read CAS Latency */
-#define SDRAMC_SDCFG1_SWT2RWP(x)	(((x)&0x00000007)<<24)	/* Single write to read/write/precharge delay */
-#define SDRAMC_SDCFG1_SRD2RWP(x)	(((x)&0x0000000F)<<28)	/* Single read to read/write/precharge delay */
-
-/* Bit definitions and macros for SDCFG2 */
-#define SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)	/* Burst Length */
-#define SDRAMC_SDCFG2_BRD2W(x)		(((x)&0x0000000F)<<20)	/* Burst read to write delay */
-#define SDRAMC_SDCFG2_BWT2RWP(x)	(((x)&0x0000000F)<<24)	/* Burst write to read/write/precharge delay */
-#define SDRAMC_SDCFG2_BRD2RP(x)		(((x)&0x0000000F)<<28)	/* Burst read to read/precharge delay */
-
-/* Bit definitions and macros for SDCS group */
-#define SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F))	/* Chip-Select Size */
-#define SDRAMC_SDCS_CSBA(x)		(((x)&0x00000FFF)<<20)	/* Chip-Select Base Address */
-#define SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
-#define SDRAMC_SDCS_CSSZ_DISABLE	(0x00000000)
-#define SDRAMC_SDCS_CSSZ_1MBYTE		(0x00000013)
-#define SDRAMC_SDCS_CSSZ_2MBYTE		(0x00000014)
-#define SDRAMC_SDCS_CSSZ_4MBYTE		(0x00000015)
-#define SDRAMC_SDCS_CSSZ_8MBYTE		(0x00000016)
-#define SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
-#define SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
-#define SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
-#define SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
-#define SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
-#define SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
-#define SDRAMC_SDCS_CSSZ_1GBYTE		(0x0000001D)
-#define SDRAMC_SDCS_CSSZ_2GBYTE		(0x0000001E)
-#define SDRAMC_SDCS_CSSZ_4GBYTE		(0x0000001F)
-
-/*********************************************************************
-* Phase Locked Loop (PLL)
-*********************************************************************/
-
-/* Bit definitions and macros for PCR */
-#define PLL_PCR_OUTDIV1(x)		(((x)&0x0000000F))	/* Output divider for CPU clock frequency */
-#define PLL_PCR_OUTDIV2(x)		(((x)&0x0000000F)<<4)	/* Output divider for bus/flexbus clock frequency */
-#define PLL_PCR_OUTDIV3(x)		(((x)&0x0000000F)<<8)	/* Output divider for SDRAM clock frequency */
-#define PLL_PCR_OUTDIV5(x)		(((x)&0x0000000F)<<16)	/* Output divider for USB clock frequency */
-#define PLL_PCR_PFDR(x)			(((x)&0x000000FF)<<24)	/* Feedback divider for VCO frequency */
-#define PLL_PCR_PFDR_MASK		(0x000F0000)
-#define PLL_PCR_OUTDIV5_MASK		(0x000F0000)
-#define PLL_PCR_OUTDIV3_MASK		(0x00000F00)
-#define PLL_PCR_OUTDIV2_MASK		(0x000000F0)
-#define PLL_PCR_OUTDIV1_MASK		(0x0000000F)
-
-/* Bit definitions and macros for PSR */
-#define PLL_PSR_LOCKS			(0x00000001)	/* PLL lost lock - sticky */
-#define PLL_PSR_LOCK			(0x00000002)	/* PLL lock status */
-#define PLL_PSR_LOLIRQ			(0x00000004)	/* PLL loss-of-lock interrupt enable */
-#define PLL_PSR_LOLRE			(0x00000008)	/* PLL loss-of-lock reset enable */
-
-/********************************************************************/
-
-#endif				/* __MCF5227X__ */
diff --git a/board/freescale/m52277evb/Kconfig b/board/freescale/m52277evb/Kconfig
deleted file mode 100644
index c4278926a4ba..000000000000
--- a/board/freescale/m52277evb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M52277EVB
-
-config SYS_CPU
-	default "mcf5227x"
-
-config SYS_BOARD
-	default "m52277evb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "M52277EVB"
-
-endif
diff --git a/board/freescale/m52277evb/MAINTAINERS b/board/freescale/m52277evb/MAINTAINERS
deleted file mode 100644
index a2a2176f6a39..000000000000
--- a/board/freescale/m52277evb/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-M52277EVB BOARD
-M:	TsiChung Liew <Tsi-Chung.Liew@nxp.com>
-S:	Maintained
-F:	board/freescale/m52277evb/
-F:	include/configs/M52277EVB.h
-F:	configs/M52277EVB_defconfig
-F:	configs/M52277EVB_stmicro_defconfig
diff --git a/board/freescale/m52277evb/Makefile b/board/freescale/m52277evb/Makefile
deleted file mode 100644
index f98b0c937762..000000000000
--- a/board/freescale/m52277evb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	= m52277evb.o
diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README
deleted file mode 100644
index 8bfd8122dd89..000000000000
--- a/board/freescale/m52277evb/README
+++ /dev/null
@@ -1,228 +0,0 @@
-Freescale MCF52277EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created Jan 8, 2008
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m52277evb/m52277evb.c	Dram setup
-- board/freescale/m52277evb/Makefile	Makefile
-- board/freescale/m52277evb/config.mk	config make
-- board/freescale/m52277evb/u-boot.lds	Linker description
-
-- arch/m68k/cpu/mcf5227x/cpu.c		cpu specific code
-- arch/m68k/cpu/mcf5227x/cpu_init.c	FBCS, Mux pins, icache and RTC extra regs
-- arch/m68k/cpu/mcf5227x/interrupts.c	cpu specific interrupt support
-- arch/m68k/cpu/mcf5227x/speed.c		system, flexbus, and cpu clock
-- arch/m68k/cpu/mcf5227x/Makefile		Makefile
-- arch/m68k/cpu/mcf5227x/config.mk	config make
-- arch/m68k/cpu/mcf5227x/start.S		start up assembly code
-
-- board/freescale/m52277evb/README	This readme file
-
-- drivers/serial/mcfuart.c	ColdFire common UART driver
-- drivers/rtc/mcfrtc.c		Realtime clock Driver
-
-- include/asm-m68k/bitops.h		Bit operation function export
-- include/asm-m68k/byteorder.h		Byte order functions
-- include/asm-m68k/crossbar.h		CrossBar structure and definition
-- include/asm-m68k/dspi.h		DSPI structure and definition
-- include/asm-m68k/edma.h		eDMA structure and definition
-- include/asm-m68k/flexbus.h		FlexBus structure and definition
-- include/asm-m68k/fsl_i2c.h		I2C structure and definition
-- include/asm-m68k/global_data.h	Global data structure
-- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
-- include/asm-m68k/immap_5227x.h	mcf5227x specific header file
-- include/asm-m68k/io.h			io functions
-- include/asm-m68k/lcd.h		LCD structure and definition
-- include/asm-m68k/m5227x.h		mcf5227x specific header file
-- include/asm-m68k/posix_types.h	Posix
-- include/asm-m68k/processor.h		header file
-- include/asm-m68k/ptrace.h		Exception structure
-- include/asm-m68k/rtc.h		Realtime clock header file
-- include/asm-m68k/ssi.h		SSI structure and definition
-- include/asm-m68k/string.h		String function export
-- include/asm-m68k/timer.h		Timer structure and definition
-- include/asm-m68k/types.h		Data types definition
-- include/asm-m68k/uart.h		Uart structure and definition
-- include/asm-m68k/u-boot.h		U-Boot structure
-
-- include/configs/M52277EVB.h		Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts			Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c			Exception init code
-
-1 MCF52277 specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in this coldfire family
-
-1.2 Configuration settings for M52277EVB Development Board
-CONFIG_MCF5227x		-- define for all MCF5227x CPUs
-CONFIG_M52277		-- define for all Freescale MCF52277 CPUs
-
-CONFIG_MCFUART		-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE		-- define UART baudrate
-
-CONFIG_MCFRTC		-- define to use common CF RTC driver
-CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
-RTC_DEBUG		-- define to show RTC debug message
-CONFIG_CMD_DATE		-- enable to use date feature in U-Boot
-
-CONFIG_MCFTMR		-- define to use DMA timer
-
-CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
-CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED		-- define for I2C speed
-CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
-CONFIG_SYS_IMMR		-- define for MBAR offset
-
-CONFIG_SYS_MBAR		-- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
-
-CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
-
-CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot,
-update will be provided at later time
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	Flash:		0x00000000-0x3FFFFFFF (1024MB)
-	DDR:		0x40000000-0x7FFFFFFF (1024MB)
-	SRAM:		0x80000000-0x8FFFFFFF (256MB)
-	IP:		0xF0000000-0xFFFFFFFF (256MB)
-
-2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
-	linux kernel, you can customize it based on your system requirements:
-	Flash0:		0x00000000-0x00FFFFFF (16MB)
-
-	DDR:		0x40000000-0x4FFFFFFF (64MB)
-	SRAM:		0x80000000-0x80007FFF (32KB)
-	IP:		0xFC000000-0xFC0FFFFF (64KB)
-
-3. COMPILATION
-==============
-3.1	To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
-uClinux version) from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1.x.x
-   make distclean
-   make M52277EVB_config
-   make
-
-4. SCREEN DUMP
-==============
-4.1 M52277EVB Development board
-    (NOTE: May not show exactly the same)
-
-U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
-
-CPU:   Freescale MCF52277 (Mask:6c Version:0)
-       CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
-       INP CLK 16 Mhz VCO CLK 480 Mhz
-Board: Freescale 52277 EVB
-I2C:   ready
-DRAM:  64 MB
-FLASH: 16 MB
-In:    serial
-Out:   serial
-Err:   serial
--> print
-baudrate=115200
-hostname=M52277EVB
-inpclk=16000000
-loadaddr=(0x40000000 + 0x10000)
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
-u-boot=u-boot.bin
-stdin=serial
-stdout=serial
-stderr=serial
-mem=65024k
-
-Environment size: 280/32764 bytes
--> bdinfo
-memstart    = 0x40000000
-memsize     = 0x04000000
-flashstart  = 0x00000000
-flashsize   = 0x01000000
-flashoffset = 0x00000000
-sramstart   = 0x80000000
-sramsize    = 0x00008000
-mbar        = 0xFC000000
-busfreq     =     80 MHz
-flbfreq     =     80 Mhz
-inpfreq     =     16 Mhz
-vcofreq     =    480 Mhz
-
-baudrate    = 115200 bps
-->
--> help
-?       - alias for 'help'
-base    - print or set address offset
-bdinfo  - print Board Info structure
-boot    - boot default, i.e., run 'bootcmd'
-bootd   - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm   - boot application image from memory
-bootp	- boot image via network using BootP/TFTP protocol
-bootvx  - Boot vxWorks from an ELF image
-cmp     - memory compare
-coninfo - print console devices and information
-cp      - memory copy
-crc32   - checksum calculation
-date    - get/set/reset date & time
-dcache  - enable or disable data cache
-echo    - echo args to console
-erase   - erase FLASH memory
-flinfo  - print FLASH memory information
-go      - start application at address 'addr'
-help    - print online help
-i2c     - I2C sub-system
-icache  - enable or disable instruction cache
-iminfo  - print header information for application image
-imls    - list all images found in flash
-itest	- return true/false on integer compare
-loadb   - load binary file over serial line (kermit mode)
-loads   - load S-Record file over serial line
-loady   - load binary file over serial line (ymodem mode)
-loop    - infinite loop on address range
-ls	- list files in a directory (default /)
-md      - memory display
-mm      - memory modify (auto-incrementing)
-mtest   - simple RAM test
-mw      - memory write (fill)
-nm      - memory modify (constant address)
-ping	- send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-reset   - Perform RESET of the CPU
-run     - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv  - set environment variables
-sleep   - delay execution for some time
-source  - run script from memory
-version - print monitor version
-->
diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c
deleted file mode 100644
index 510af33e4c3c..000000000000
--- a/board/freescale/m52277evb/m52277evb.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	puts("Board: ");
-	puts("Freescale M52277 EVB\n");
-	return 0;
-};
-
-int dram_init(void)
-{
-	u32 dramsize;
-
-#ifdef CONFIG_CF_SBF
-	/*
-	 * Serial Boot: The dram is already initialized in start.S
-	 * only require to return DRAM size
-	 */
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-#else
-	sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
-	gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
-	u32 i;
-
-	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
-
-	for (i = 0x13; i < 0x20; i++) {
-		if (dramsize == (1 << i))
-			break;
-	}
-	i--;
-
-	out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
-
-	out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
-
-	out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
-	out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
-
-	/* Issue PALL */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-	__asm__("nop");
-
-	/* Issue LEMR */
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE);
-	__asm__("nop");
-	out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD);
-	__asm__("nop");
-
-	udelay(1000);
-
-	/* Issue PALL */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
-	__asm__("nop");
-
-	/* Perform two refresh cycles */
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-	__asm__("nop");
-	out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
-	__asm__("nop");
-
-	out_be32(&sdram->sdcr,
-		(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
-
-	udelay(100);
-#endif
-	gd->ram_size = dramsize;
-
-	return 0;
-};
-
-int testdram(void)
-{
-	/* TODO: XXX XXX XXX */
-	printf("DRAM test not implemented!\n");
-
-	return (0);
-}
diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig
deleted file mode 100644
index bab8ac4b78d2..000000000000
--- a/configs/M52277EVB_defconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_SECT_SIZE=0x8000
-CONFIG_DEFAULT_DEVICE_TREE="M52277EVB"
-CONFIG_TARGET_M52277EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x40000
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig
deleted file mode 100644
index 98c64ff31a66..000000000000
--- a/configs/M52277EVB_stmicro_defconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0x43E00000
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0x30000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="M52277EVB_stmicro"
-CONFIG_TARGET_M52277EVB=y
-CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT"
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_JFFS2=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=2
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_CF_SPI=y
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
deleted file mode 100644
index 0428be729b23..000000000000
--- a/include/configs/M52277EVB.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF52277 EVB board.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M52277EVB_H
-#define _M52277EVB_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_HOSTNAME			"M52277EVB"
-#define CONFIG_SYS_UBOOT_END		0x3FFFF
-#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
-#ifdef CONFIG_SYS_STMICRO_BOOT
-/* ST Micro serial flash */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=loadb ${loadaddr} ${baudrate};"	\
-	"loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
-	"upd=run load; run prog\0"		\
-	"prog=sf probe 0:2 10000 1;"		\
-	"sf erase 0 30000;"			\
-	"sf write ${loadaddr} 0 30000;"		\
-	"save\0"				\
-	""
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=loadb ${loadaddr} ${baudrate}\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" " __stringify(CONFIG_SYS_UBOOT_END) ";"		\
-	"era " __stringify(CONFIG_SYS_FLASH_BASE) " "		\
-	__stringify(CONFIG_SYS_UBOOT_END) ";"			\
-	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" ${filesize}; save\0"			\
-	"updsbf=run loadsbf; run progsbf\0"	\
-	"loadsbf=loadb ${loadaddr} ${baudrate};"	\
-	"loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
-	"progsbf=sf probe 0:2 10000 1;"		\
-	"sf erase 0 30000;"			\
-	"sf write ${loadaddr} 0 30000;"		\
-	""
-#endif
-
-/* LCD */
-#ifdef CONFIG_CMD_BMP
-#define CONFIG_LCD_LOGO
-#define CONFIG_SHARP_LQ035Q7DH06
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_REGS_BASE	0xFC0B0000
-#define CONFIG_SYS_USB_EHCI_CPU_INIT
-#endif
-
-/* Realtime clock */
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
-#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SYS_SBFHDR_SIZE		0x7
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_SYS_INPUT_CLKSRC	16000000
-
-#define CONFIG_PRAM		2048	/* 2048 KB */
-
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR		0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE		0x8000	/* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_CFG1		0x43711630
-#define CONFIG_SYS_SDRAM_CFG2		0x56670000
-#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
-#define CONFIG_SYS_SDRAM_EMOD		0x81810000
-#define CONFIG_SYS_SDRAM_MODE		0x00CD0000
-#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x00
-
-#ifdef CONFIG_CF_SBF
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
-
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-#define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
-
-/*
- * Configuration for environment
- * Environment is not embedded in u-boot. First time runing may have env
- * crc error warning if there is no correct environment on the flash.
- */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_STMICRO_BOOT
-#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_CS0_BASE
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
-#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_CS0_BASE
-#endif
-
-#ifdef CONFIG_SYS_FLASH_CFI
-#	define CONFIG_FLASH_SPANSION_S29WS_N	1
-#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_CHECKSUM
-#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
-#endif
-
-#define LDS_BOARD_TEXT \
-        arch/m68k/cpu/mcf5227x/built-in.o   (.text*) \
-	arch/m68k/lib/built-in.o            (.text*)
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-#	define CONFIG_JFFS2_DEV		"nor0"
-#	define CONFIG_JFFS2_PART_SIZE	(0x01000000 - 0x40000)
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x40000)
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
-#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
-					 CF_CACR_DISD | CF_CACR_INVI | \
-					 CF_CACR_CEIB | CF_CACR_DCM | \
-					 CF_CACR_EUSP)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash
- * CS1 - Available
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-
-#ifdef CONFIG_CF_SBF
-#define CONFIG_SYS_CS0_BASE		0x04000000
-#define CONFIG_SYS_CS0_MASK		0x00FF0001
-#define CONFIG_SYS_CS0_CTRL		0x00001FA0
-#else
-#define CONFIG_SYS_CS0_BASE		0x00000000
-#define CONFIG_SYS_CS0_MASK		0x00FF0001
-#define CONFIG_SYS_CS0_CTRL		0x00001FA0
-#endif
-
-#endif				/* _M52277EVB_H */
-- 
2.17.1