All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v7 0/3] media: imx: add support for imx8mq MIPI RX
@ 2021-07-16 10:22 ` Martin Kepplinger
  0 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

hi,

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
any feedback,

                           martin

revision history
----------------
v7: (thank you Laurent and Rob)
* fix the binding example (include the reset driver)
* use pm_runtime_resume_and_get()
* fix some logic in init_cfg()
* add some useful code comments and fix minor bits found by Laurent in v6

v6: (thank you Laurent and Rob)
* add reviewed-by tag to binding
* statically allocate clk_bulk_data
* fix how the hs_settle value is applied
* remove s_power calls
* remove the link_setup() callback implementation and make the link immutable
* more cleanups according to Laurents' review from v5
https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/

v5: (thank you Laurent)
* fix reset usage by using the already supported reset controller driver
* remove clko2 (totally unrelated clock / had been included by accident)
* rename pxl clock to ui
https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/

v4: (thank you Rob and Marco)
* create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
* add imx8mq-specific compatibile to imx8mq.dtsi for future use
https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/

v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/

v1:
https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t

Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 947 ++++++++++++++++++
 4 files changed, 1226 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 0/3] media: imx: add support for imx8mq MIPI RX
@ 2021-07-16 10:22 ` Martin Kepplinger
  0 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

hi,

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
any feedback,

                           martin

revision history
----------------
v7: (thank you Laurent and Rob)
* fix the binding example (include the reset driver)
* use pm_runtime_resume_and_get()
* fix some logic in init_cfg()
* add some useful code comments and fix minor bits found by Laurent in v6

v6: (thank you Laurent and Rob)
* add reviewed-by tag to binding
* statically allocate clk_bulk_data
* fix how the hs_settle value is applied
* remove s_power calls
* remove the link_setup() callback implementation and make the link immutable
* more cleanups according to Laurents' review from v5
https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/

v5: (thank you Laurent)
* fix reset usage by using the already supported reset controller driver
* remove clko2 (totally unrelated clock / had been included by accident)
* rename pxl clock to ui
https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/

v4: (thank you Rob and Marco)
* create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
* add imx8mq-specific compatibile to imx8mq.dtsi for future use
https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/

v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/

v1:
https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t

Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 947 ++++++++++++++++++
 4 files changed, 1226 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
  2021-07-16 10:22 ` Martin Kepplinger
@ 2021-07-16 10:22   ` Martin Kepplinger
  -1 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
describe the DT bindings for it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++++++++++++++++
 1 file changed, 174 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 000000000000..9c04fa85ee5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core is the RX Controller Core Clock input. This clock
+                     must be exactly equal to or faster than the receive
+                     byteclock from the RX DPHY.
+      - description: esc is the Rx Escape Clock. This must be the same escape
+                     clock that the RX DPHY receives.
+      - description: ui is the pixel clock (phy_ref up to 333Mhz).
+                     See the reference manual for details.
+
+  clock-names:
+    items:
+      - const: core
+      - const: esc
+      - const: ui
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CORE_RESET reset register bit definition
+      - description: PHY_REF_RESET reset register bit definition
+      - description: ESC_RESET reset register bit definition
+
+  fsl,mipi-phy-gpr:
+    description: |
+      The phandle to the imx8mq syscon iomux-gpr with the register
+      for setting RX_ENABLE for the mipi receiver.
+
+      The format should be as follows:
+      <gpr req_gpr>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: The 'gpr' is the phandle to general purpose register node.
+        - description: The 'req_gpr' is the gpr register offset containing
+                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+          maximum: 0xff
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                items:
+                  minItems: 1
+                  maxItems: 4
+                  items:
+                    - const: 1
+                    - const: 2
+                    - const: 3
+                    - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - fsl,mipi-phy-gpr
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    csi@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>;
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+        clock-names = "core", "esc", "ui";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 receiver phy and controller
@ 2021-07-16 10:22   ` Martin Kepplinger
  0 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
describe the DT bindings for it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++++++++++++++++
 1 file changed, 174 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 000000000000..9c04fa85ee5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core is the RX Controller Core Clock input. This clock
+                     must be exactly equal to or faster than the receive
+                     byteclock from the RX DPHY.
+      - description: esc is the Rx Escape Clock. This must be the same escape
+                     clock that the RX DPHY receives.
+      - description: ui is the pixel clock (phy_ref up to 333Mhz).
+                     See the reference manual for details.
+
+  clock-names:
+    items:
+      - const: core
+      - const: esc
+      - const: ui
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CORE_RESET reset register bit definition
+      - description: PHY_REF_RESET reset register bit definition
+      - description: ESC_RESET reset register bit definition
+
+  fsl,mipi-phy-gpr:
+    description: |
+      The phandle to the imx8mq syscon iomux-gpr with the register
+      for setting RX_ENABLE for the mipi receiver.
+
+      The format should be as follows:
+      <gpr req_gpr>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: The 'gpr' is the phandle to general purpose register node.
+        - description: The 'req_gpr' is the gpr register offset containing
+                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+          maximum: 0xff
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                items:
+                  minItems: 1
+                  maxItems: 4
+                  items:
+                    - const: 1
+                    - const: 2
+                    - const: 3
+                    - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - fsl,mipi-phy-gpr
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    csi@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>;
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+        clock-names = "core", "esc", "ui";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  2021-07-16 10:22 ` Martin Kepplinger
@ 2021-07-16 10:22   ` Martin Kepplinger
  -1 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

Add a driver to support the i.MX8MQ MIPI CSI receiver. The hardware side
is based on
https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/imx8/mxc-mipi-csi2_yav.c?h=imx_5.4.70_2.3.0

It's built as part of VIDEO_IMX7_CSI because that's documented to support
i.MX8M platforms. This driver adds i.MX8MQ support where currently only the
i.MX8MM platform has been supported.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/staging/media/imx/Makefile           |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c | 947 +++++++++++++++++++
 2 files changed, 948 insertions(+)
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
index 6ac33275cc97..19c2fc54d424 100644
--- a/drivers/staging/media/imx/Makefile
+++ b/drivers/staging/media/imx/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
 
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-mipi-csis.o
+obj-$(CONFIG_VIDEO_IMX7_CSI) += imx8mq-mipi-csi2.o
diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
new file mode 100644
index 000000000000..dc4d667394a8
--- /dev/null
+++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
@@ -0,0 +1,947 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NXP i.MX8MQ SoC series MIPI-CSI2 receiver driver
+ *
+ * Copyright (C) 2021 Purism SPC
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interconnect.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+#define MIPI_CSI2_DRIVER_NAME			"imx8mq-mipi-csi2"
+#define MIPI_CSI2_SUBDEV_NAME			MIPI_CSI2_DRIVER_NAME
+
+#define MIPI_CSI2_PAD_SINK			0
+#define MIPI_CSI2_PAD_SOURCE			1
+#define MIPI_CSI2_PADS_NUM			2
+
+#define MIPI_CSI2_DEF_PIX_WIDTH			640
+#define MIPI_CSI2_DEF_PIX_HEIGHT		480
+
+/* Register map definition */
+
+/* i.MX8MQ CSI-2 controller CSR */
+#define CSI2RX_CFG_NUM_LANES			0x100
+#define CSI2RX_CFG_DISABLE_DATA_LANES		0x104
+#define CSI2RX_BIT_ERR				0x108
+#define CSI2RX_IRQ_STATUS			0x10c
+#define CSI2RX_IRQ_MASK				0x110
+#define CSI2RX_IRQ_MASK_ALL			0x1ff
+#define CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE	0x8
+#define CSI2RX_ULPS_STATUS			0x114
+#define CSI2RX_PPI_ERRSOT_HS			0x118
+#define CSI2RX_PPI_ERRSOTSYNC_HS		0x11c
+#define CSI2RX_PPI_ERRESC			0x120
+#define CSI2RX_PPI_ERRSYNCESC			0x124
+#define CSI2RX_PPI_ERRCONTROL			0x128
+#define CSI2RX_CFG_DISABLE_PAYLOAD_0		0x12c
+#define CSI2RX_CFG_VID_P_FIFO_SEND_LEVEL	0x188
+#define CSI2RX_CFG_DISABLE_PAYLOAD_1		0x130
+
+enum {
+	ST_POWERED	= 1,
+	ST_STREAMING	= 2,
+	ST_SUSPENDED	= 4,
+};
+
+static const char * const imx8mq_mipi_csi_clk_id[] = {
+	"core",
+	"esc",
+	"ui",
+};
+
+#define CSI2_NUM_CLKS	ARRAY_SIZE(imx8mq_mipi_csi_clk_id)
+
+#define	GPR_CSI2_1_RX_ENABLE		BIT(13)
+#define	GPR_CSI2_1_VID_INTFC_ENB	BIT(12)
+#define	GPR_CSI2_1_HSEL			BIT(10)
+#define	GPR_CSI2_1_CONT_CLK_MODE	BIT(8)
+#define	GPR_CSI2_1_S_PRG_RXHS_SETTLE(x)	(((x) & 0x3f) << 2)
+
+/*
+ * The send level configures the number of entries that must accumulate in
+ * the Pixel FIFO before the data will be transferred to the video output.
+ * See https://community.nxp.com/t5/i-MX-Processors/IMX8M-MIPI-CSI-Host-Controller-send-level/m-p/864005/highlight/true#M131704
+ */
+#define CSI2RX_SEND_LEVEL			64
+
+struct csi_state {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk_bulk_data clks[CSI2_NUM_CLKS];
+	struct reset_control *rst;
+	struct regulator *mipi_phy_regulator;
+
+	struct v4l2_subdev sd;
+	struct media_pad pads[MIPI_CSI2_PADS_NUM];
+	struct v4l2_async_notifier notifier;
+	struct v4l2_subdev *src_sd;
+
+	struct v4l2_fwnode_bus_mipi_csi2 bus;
+
+	struct mutex lock; /* Protect csi2_fmt, format_mbus, state, hs_settle */
+	const struct csi2_pix_format *csi2_fmt;
+	struct v4l2_mbus_framefmt format_mbus[MIPI_CSI2_PADS_NUM];
+	u32 state;
+	u32 hs_settle;
+
+	struct regmap *phy_gpr;
+	u8 phy_gpr_reg;
+
+	struct icc_path			*icc_path;
+	s32				icc_path_bw;
+};
+
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+struct csi2_pix_format {
+	u32 code;
+	u8 width;
+};
+
+static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
+	/* RAW (Bayer and greyscale) formats. */
+	{
+		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_Y8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_Y10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_Y12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
+		.width = 14,
+	}, {
+	/* YUV formats */
+		.code = MEDIA_BUS_FMT_YUYV8_2X8,
+		.width = 16,
+	}, {
+		.code = MEDIA_BUS_FMT_YUYV8_1X16,
+		.width = 16,
+	}
+};
+
+static const struct csi2_pix_format *find_csi2_format(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_formats); i++)
+		if (code == imx8mq_mipi_csi_formats[i].code)
+			return &imx8mq_mipi_csi_formats[i];
+	return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static inline void imx8mq_mipi_csi_write(struct csi_state *state, u32 reg, u32 val)
+{
+	writel(val, state->regs + reg);
+}
+
+static int imx8mq_mipi_csi_sw_reset(struct csi_state *state)
+{
+	int ret;
+
+	/*
+	 * these are most likely self-clearing reset bits. to make it
+	 * more clear, the reset-imx7 driver should implement the
+	 * .reset() operation.
+	 */
+	ret = reset_control_assert(state->rst);
+	if (ret < 0) {
+		dev_err(state->dev, "Failed to assert resets: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void imx8mq_mipi_csi_system_enable(struct csi_state *state, int on)
+{
+	if (!on) {
+		imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
+		return;
+	}
+
+	regmap_update_bits(state->phy_gpr,
+			   state->phy_gpr_reg,
+			   0x3fff,
+			   GPR_CSI2_1_RX_ENABLE |
+			   GPR_CSI2_1_VID_INTFC_ENB |
+			   GPR_CSI2_1_HSEL |
+			   GPR_CSI2_1_CONT_CLK_MODE |
+			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(state->hs_settle));
+}
+
+static void imx8mq_mipi_csi_set_params(struct csi_state *state)
+{
+	int lanes = state->bus.num_data_lanes;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_NUM_LANES, lanes - 1);
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES,
+			      (0xf << lanes) & 0xf);
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK, CSI2RX_IRQ_MASK_ALL);
+	imx8mq_mipi_csi_write(state, 0x180, 1);
+	/* vid_vc */
+	imx8mq_mipi_csi_write(state, 0x184, 1);
+	imx8mq_mipi_csi_write(state, 0x188, CSI2RX_SEND_LEVEL);
+}
+
+static int imx8mq_mipi_csi_clk_enable(struct csi_state *state)
+{
+	return clk_bulk_prepare_enable(CSI2_NUM_CLKS, state->clks);
+}
+
+static void imx8mq_mipi_csi_clk_disable(struct csi_state *state)
+{
+	clk_bulk_disable_unprepare(CSI2_NUM_CLKS, state->clks);
+}
+
+static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
+{
+	unsigned int i;
+
+	for (i = 0; i < CSI2_NUM_CLKS; i++)
+		state->clks[i].id = imx8mq_mipi_csi_clk_id[i];
+
+	return devm_clk_bulk_get(state->dev, CSI2_NUM_CLKS, state->clks);
+}
+
+static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state)
+{
+	s64 link_freq;
+	u32 lane_rate;
+
+	/* Calculate the line rate from the pixel rate. */
+	link_freq = v4l2_get_link_freq(state->src_sd->ctrl_handler,
+				       state->csi2_fmt->width,
+				       state->bus.num_data_lanes * 2);
+	if (link_freq < 0) {
+		dev_err(state->dev, "Unable to obtain link frequency: %d\n",
+			(int)link_freq);
+		return link_freq;
+	}
+
+	lane_rate = link_freq * 2;
+	if (lane_rate < 80000000 || lane_rate > 1500000000) {
+		dev_dbg(state->dev, "Out-of-bound lane rate %u\n", lane_rate);
+		return -EINVAL;
+	}
+
+	/*
+	 * The following table is the source for this:
+	 * https://community.nxp.com/t5/i-MX-Processors/Explenation-for-HS-SETTLE-parameter-in-MIPI-CSI-D-PHY-registers/m-p/764275/highlight/true#M118744
+	 * but it would be even better to calculate the value for any
+	 * given datarate.
+	 */
+	if (lane_rate < 250000000)
+		state->hs_settle = 0xb;
+	else if (lane_rate < 500000000)
+		state->hs_settle = 0x8;
+	else
+		state->hs_settle = 0x6;
+
+	dev_dbg(state->dev, "start stream: lane rate %u hs_settle %u\n",
+		lane_rate, state->hs_settle);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_start_stream(struct csi_state *state)
+{
+	int ret;
+
+	ret = imx8mq_mipi_csi_sw_reset(state);
+	if (ret)
+		return ret;
+
+	imx8mq_mipi_csi_set_params(state);
+	imx8mq_mipi_csi_calc_hs_settle(state);
+	imx8mq_mipi_csi_system_enable(state, true);
+
+	return 0;
+}
+
+static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
+{
+	imx8mq_mipi_csi_system_enable(state, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static struct csi_state *mipi_sd_to_csi2_state(struct v4l2_subdev *sdev)
+{
+	return container_of(sdev, struct csi_state, sd);
+}
+
+static int imx8mq_mipi_csi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK,
+			      CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE);
+
+	if (enable) {
+		ret = pm_runtime_resume_and_get(state->dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (enable) {
+		if (state->state & ST_SUSPENDED) {
+			ret = -EBUSY;
+			goto unlock;
+		}
+
+		ret = imx8mq_mipi_csi_start_stream(state);
+		if (ret < 0)
+			goto unlock;
+
+		ret = v4l2_subdev_call(state->src_sd, video, s_stream, 1);
+		if (ret < 0)
+			goto unlock;
+
+		state->state |= ST_STREAMING;
+	} else {
+		v4l2_subdev_call(state->src_sd, video, s_stream, 0);
+		imx8mq_mipi_csi_stop_stream(state);
+		state->state &= ~ST_STREAMING;
+	}
+
+unlock:
+	mutex_unlock(&state->lock);
+
+	if (!enable || ret < 0)
+		pm_runtime_put(state->dev);
+
+	return ret;
+}
+
+static struct v4l2_mbus_framefmt *
+imx8mq_mipi_csi_get_format(struct csi_state *state,
+			   struct v4l2_subdev_state *sd_state,
+			   enum v4l2_subdev_format_whence which,
+			   unsigned int pad)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(&state->sd, sd_state, pad);
+
+	return &state->format_mbus[pad];
+}
+
+static int imx8mq_mipi_csi_init_cfg(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_state *sd_state)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt_sink;
+	struct v4l2_mbus_framefmt *fmt_source;
+	enum v4l2_subdev_format_whence which;
+
+	which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt_sink = imx8mq_mipi_csi_get_format(state, sd_state, which,
+					      MIPI_CSI2_PAD_SINK);
+
+	fmt_sink->code = MEDIA_BUS_FMT_SGBRG10_1X10;
+	fmt_sink->width = MIPI_CSI2_DEF_PIX_WIDTH;
+	fmt_sink->height = MIPI_CSI2_DEF_PIX_HEIGHT;
+	fmt_sink->field = V4L2_FIELD_NONE;
+
+	fmt_sink->colorspace = V4L2_COLORSPACE_RAW;
+	fmt_sink->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->quantization =
+		V4L2_MAP_QUANTIZATION_DEFAULT(false, fmt_sink->colorspace,
+					      fmt_sink->ycbcr_enc);
+
+	fmt_source = imx8mq_mipi_csi_get_format(state, sd_state, which,
+						MIPI_CSI2_PAD_SOURCE);
+	*fmt_source = *fmt_sink;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_get_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *sd_state,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt;
+
+	fmt = imx8mq_mipi_csi_get_format(state, sd_state, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	sdformat->format = *fmt;
+
+	mutex_unlock(&state->lock);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd,
+					  struct v4l2_subdev_state *sd_state,
+					  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/*
+	 * We can't transcode in any way, the source format is identical
+	 * to the sink format.
+	 */
+	if (code->pad == MIPI_CSI2_PAD_SOURCE) {
+		struct v4l2_mbus_framefmt *fmt;
+
+		if (code->index > 0)
+			return -EINVAL;
+
+		fmt = imx8mq_mipi_csi_get_format(state, sd_state, code->which,
+						 code->pad);
+		code->code = fmt->code;
+		return 0;
+	}
+
+	if (code->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	if (code->index >= ARRAY_SIZE(imx8mq_mipi_csi_formats))
+		return -EINVAL;
+
+	code->code = imx8mq_mipi_csi_formats[code->index].code;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_set_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *sd_state,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct csi2_pix_format const *csi2_fmt;
+	struct v4l2_mbus_framefmt *fmt;
+
+	/*
+	 * The device can't transcode in any way, the source format can't be
+	 * modified.
+	 */
+	if (sdformat->pad == MIPI_CSI2_PAD_SOURCE)
+		return imx8mq_mipi_csi_get_fmt(sd, sd_state, sdformat);
+
+	if (sdformat->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	csi2_fmt = find_csi2_format(sdformat->format.code);
+	if (!csi2_fmt)
+		csi2_fmt = &imx8mq_mipi_csi_formats[0];
+
+	fmt = imx8mq_mipi_csi_get_format(state, sd_state, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	fmt->code = csi2_fmt->code;
+	fmt->width = sdformat->format.width;
+	fmt->height = sdformat->format.height;
+
+	sdformat->format = *fmt;
+
+	/* Propagate the format from sink to source. */
+	fmt = imx8mq_mipi_csi_get_format(state, sd_state, sdformat->which,
+					 MIPI_CSI2_PAD_SOURCE);
+	*fmt = sdformat->format;
+
+	/* Store the CSI2 format descriptor for active formats. */
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		state->csi2_fmt = csi2_fmt;
+
+	mutex_unlock(&state->lock);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx8mq_mipi_csi_video_ops = {
+	.s_stream	= imx8mq_mipi_csi_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx8mq_mipi_csi_pad_ops = {
+	.init_cfg		= imx8mq_mipi_csi_init_cfg,
+	.enum_mbus_code		= imx8mq_mipi_csi_enum_mbus_code,
+	.get_fmt		= imx8mq_mipi_csi_get_fmt,
+	.set_fmt		= imx8mq_mipi_csi_set_fmt,
+};
+
+static const struct v4l2_subdev_ops imx8mq_mipi_csi_subdev_ops = {
+	.video	= &imx8mq_mipi_csi_video_ops,
+	.pad	= &imx8mq_mipi_csi_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+static const struct media_entity_operations imx8mq_mipi_csi_entity_ops = {
+	.link_validate	= v4l2_subdev_link_validate,
+	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async subdev notifier
+ */
+
+static struct csi_state *
+mipi_notifier_to_csi2_state(struct v4l2_async_notifier *n)
+{
+	return container_of(n, struct csi_state, notifier);
+}
+
+static int imx8mq_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier,
+					struct v4l2_subdev *sd,
+					struct v4l2_async_subdev *asd)
+{
+	struct csi_state *state = mipi_notifier_to_csi2_state(notifier);
+	struct media_pad *sink = &state->sd.entity.pads[MIPI_CSI2_PAD_SINK];
+
+	state->src_sd = sd;
+
+	return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED |
+					       MEDIA_LNK_FL_IMMUTABLE);
+}
+
+static const struct v4l2_async_notifier_operations imx8mq_mipi_csi_notify_ops = {
+	.bound = imx8mq_mipi_csi_notify_bound,
+};
+
+static int imx8mq_mipi_csi_async_register(struct csi_state *state)
+{
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	struct v4l2_async_subdev *asd;
+	struct fwnode_handle *ep;
+	unsigned int i;
+	int ret;
+
+	v4l2_async_notifier_init(&state->notifier);
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(state->dev), 0, 0,
+					     FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!ep)
+		return -ENOTCONN;
+
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (ret)
+		goto err_parse;
+
+	for (i = 0; i < vep.bus.mipi_csi2.num_data_lanes; ++i) {
+		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1) {
+			dev_err(state->dev,
+				"data lanes reordering is not supported");
+			ret = -EINVAL;
+			goto err_parse;
+		}
+	}
+
+	state->bus = vep.bus.mipi_csi2;
+
+	dev_dbg(state->dev, "data lanes: %d flags: 0x%08x\n",
+		state->bus.num_data_lanes,
+		state->bus.flags);
+
+	asd = v4l2_async_notifier_add_fwnode_remote_subdev(&state->notifier,
+							   ep, struct v4l2_async_subdev);
+	if (IS_ERR(asd)) {
+		ret = PTR_ERR(asd);
+		goto err_parse;
+	}
+
+	fwnode_handle_put(ep);
+
+	state->notifier.ops = &imx8mq_mipi_csi_notify_ops;
+
+	ret = v4l2_async_subdev_notifier_register(&state->sd, &state->notifier);
+	if (ret)
+		return ret;
+
+	return v4l2_async_register_subdev(&state->sd);
+
+err_parse:
+	fwnode_handle_put(ep);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+static int imx8mq_mipi_csi_pm_suspend(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	mutex_lock(&state->lock);
+
+	if (state->state & ST_POWERED) {
+		imx8mq_mipi_csi_stop_stream(state);
+		imx8mq_mipi_csi_clk_disable(state);
+		state->state &= ~ST_POWERED;
+		if (!runtime)
+			state->state |= ST_SUSPENDED;
+	}
+
+	mutex_unlock(&state->lock);
+
+	ret = icc_set_bw(state->icc_path, 0, 0);
+	if (ret)
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int imx8mq_mipi_csi_pm_resume(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	ret = icc_set_bw(state->icc_path, 0, state->icc_path_bw);
+	if (ret) {
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (!runtime && !(state->state & ST_SUSPENDED))
+		goto unlock;
+
+	if (!(state->state & ST_POWERED)) {
+		state->state |= ST_POWERED;
+		ret = imx8mq_mipi_csi_clk_enable(state);
+	}
+	if (state->state & ST_STREAMING) {
+		ret = imx8mq_mipi_csi_start_stream(state);
+		if (ret)
+			goto unlock;
+	}
+
+	state->state &= ~ST_SUSPENDED;
+
+unlock:
+	mutex_unlock(&state->lock);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int __maybe_unused imx8mq_mipi_csi_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, true);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, true);
+}
+
+static const struct dev_pm_ops imx8mq_mipi_csi_pm_ops = {
+	SET_RUNTIME_PM_OPS(imx8mq_mipi_csi_runtime_suspend,
+			   imx8mq_mipi_csi_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(imx8mq_mipi_csi_suspend, imx8mq_mipi_csi_resume)
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe/remove & platform driver
+ */
+
+static int imx8mq_mipi_csi_subdev_init(struct csi_state *state)
+{
+	struct v4l2_subdev *sd = &state->sd;
+
+	v4l2_subdev_init(sd, &imx8mq_mipi_csi_subdev_ops);
+	sd->owner = THIS_MODULE;
+	snprintf(sd->name, sizeof(sd->name), "%s %s",
+		 MIPI_CSI2_SUBDEV_NAME, dev_name(state->dev));
+
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	sd->entity.ops = &imx8mq_mipi_csi_entity_ops;
+
+	sd->dev = state->dev;
+
+	state->csi2_fmt = &imx8mq_mipi_csi_formats[0];
+	imx8mq_mipi_csi_init_cfg(sd, NULL);
+
+	state->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
+					 | MEDIA_PAD_FL_MUST_CONNECT;
+	state->pads[MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE
+					   | MEDIA_PAD_FL_MUST_CONNECT;
+	return media_entity_pads_init(&sd->entity, MIPI_CSI2_PADS_NUM,
+				      state->pads);
+}
+
+static void imx8mq_mipi_csi_release_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	icc_put(state->icc_path);
+}
+
+static int imx8mq_mipi_csi_init_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/* Optional interconnect request */
+	state->icc_path = of_icc_get(&pdev->dev, "dram");
+	if (IS_ERR_OR_NULL(state->icc_path))
+		return PTR_ERR_OR_ZERO(state->icc_path);
+
+	state->icc_path_bw = MBps_to_icc(700);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
+{
+	struct device *dev = state->dev;
+	struct device_node *np = state->dev->of_node;
+	struct device_node *node;
+	phandle ph;
+	u32 out_val[2];
+	int ret = 0;
+
+	state->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(state->rst)) {
+		dev_err(dev, "Failed to get reset: %pe\n", state->rst);
+		return PTR_ERR(state->rst);
+	}
+
+	ret = of_property_read_u32_array(np, "fsl,mipi-phy-gpr", out_val,
+					 ARRAY_SIZE(out_val));
+	if (ret) {
+		dev_err(dev, "no fsl,mipi-phy-gpr property found: %d\n", ret);
+		return ret;
+	}
+
+	ph = *out_val;
+
+	node = of_find_node_by_phandle(ph);
+	if (!node) {
+		dev_err(dev, "Error finding node by phandle\n");
+		return -ENODEV;
+	}
+	state->phy_gpr = syscon_node_to_regmap(node);
+	of_node_put(node);
+	if (IS_ERR(state->phy_gpr)) {
+		dev_err(dev, "failed to get gpr regmap: %pe\n", state->phy_gpr);
+		return PTR_ERR(state->phy_gpr);
+	}
+
+	state->phy_gpr_reg = out_val[1];
+	dev_dbg(dev, "phy gpr register set to 0x%x\n", state->phy_gpr_reg);
+
+	return ret;
+}
+
+static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct csi_state *state;
+	int ret;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	state->dev = dev;
+
+	ret = imx8mq_mipi_csi_parse_dt(state);
+	if (ret < 0) {
+		dev_err(dev, "Failed to parse device tree: %d\n", ret);
+		return ret;
+	}
+
+	/* Acquire resources. */
+	state->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	ret = imx8mq_mipi_csi_clk_get(state);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, &state->sd);
+
+	mutex_init(&state->lock);
+
+	ret = imx8mq_mipi_csi_subdev_init(state);
+	if (ret < 0)
+		goto mutex;
+
+	ret = imx8mq_mipi_csi_init_icc(pdev);
+	if (ret)
+		goto mutex;
+
+	/* Enable runtime PM. */
+	pm_runtime_enable(dev);
+	if (!pm_runtime_enabled(dev)) {
+		ret = imx8mq_mipi_csi_pm_resume(dev, true);
+		if (ret < 0)
+			goto icc;
+	}
+
+	ret = imx8mq_mipi_csi_async_register(state);
+	if (ret < 0)
+		goto cleanup;
+
+	return 0;
+
+cleanup:
+	pm_runtime_disable(&pdev->dev);
+	imx8mq_mipi_csi_pm_suspend(&pdev->dev, true);
+
+	media_entity_cleanup(&state->sd.entity);
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+icc:
+	imx8mq_mipi_csi_release_icc(pdev);
+mutex:
+	mutex_destroy(&state->lock);
+
+	return ret;
+}
+
+static int imx8mq_mipi_csi_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+
+	pm_runtime_disable(&pdev->dev);
+	imx8mq_mipi_csi_pm_suspend(&pdev->dev, true);
+	media_entity_cleanup(&state->sd.entity);
+	mutex_destroy(&state->lock);
+	pm_runtime_set_suspended(&pdev->dev);
+	imx8mq_mipi_csi_release_icc(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
+	{ .compatible = "fsl,imx8mq-mipi-csi2", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);
+
+static struct platform_driver imx8mq_mipi_csi_driver = {
+	.probe		= imx8mq_mipi_csi_probe,
+	.remove		= imx8mq_mipi_csi_remove,
+	.driver		= {
+		.of_match_table = imx8mq_mipi_csi_of_match,
+		.name		= MIPI_CSI2_DRIVER_NAME,
+		.pm		= &imx8mq_mipi_csi_pm_ops,
+	},
+};
+
+module_platform_driver(imx8mq_mipi_csi_driver);
+
+MODULE_DESCRIPTION("i.MX8MQ MIPI CSI-2 receiver driver");
+MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@puri.sm>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx8mq-mipi-csi2");
-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
@ 2021-07-16 10:22   ` Martin Kepplinger
  0 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

Add a driver to support the i.MX8MQ MIPI CSI receiver. The hardware side
is based on
https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/imx8/mxc-mipi-csi2_yav.c?h=imx_5.4.70_2.3.0

It's built as part of VIDEO_IMX7_CSI because that's documented to support
i.MX8M platforms. This driver adds i.MX8MQ support where currently only the
i.MX8MM platform has been supported.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/staging/media/imx/Makefile           |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c | 947 +++++++++++++++++++
 2 files changed, 948 insertions(+)
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
index 6ac33275cc97..19c2fc54d424 100644
--- a/drivers/staging/media/imx/Makefile
+++ b/drivers/staging/media/imx/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
 
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
 obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-mipi-csis.o
+obj-$(CONFIG_VIDEO_IMX7_CSI) += imx8mq-mipi-csi2.o
diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
new file mode 100644
index 000000000000..dc4d667394a8
--- /dev/null
+++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
@@ -0,0 +1,947 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NXP i.MX8MQ SoC series MIPI-CSI2 receiver driver
+ *
+ * Copyright (C) 2021 Purism SPC
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interconnect.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+#define MIPI_CSI2_DRIVER_NAME			"imx8mq-mipi-csi2"
+#define MIPI_CSI2_SUBDEV_NAME			MIPI_CSI2_DRIVER_NAME
+
+#define MIPI_CSI2_PAD_SINK			0
+#define MIPI_CSI2_PAD_SOURCE			1
+#define MIPI_CSI2_PADS_NUM			2
+
+#define MIPI_CSI2_DEF_PIX_WIDTH			640
+#define MIPI_CSI2_DEF_PIX_HEIGHT		480
+
+/* Register map definition */
+
+/* i.MX8MQ CSI-2 controller CSR */
+#define CSI2RX_CFG_NUM_LANES			0x100
+#define CSI2RX_CFG_DISABLE_DATA_LANES		0x104
+#define CSI2RX_BIT_ERR				0x108
+#define CSI2RX_IRQ_STATUS			0x10c
+#define CSI2RX_IRQ_MASK				0x110
+#define CSI2RX_IRQ_MASK_ALL			0x1ff
+#define CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE	0x8
+#define CSI2RX_ULPS_STATUS			0x114
+#define CSI2RX_PPI_ERRSOT_HS			0x118
+#define CSI2RX_PPI_ERRSOTSYNC_HS		0x11c
+#define CSI2RX_PPI_ERRESC			0x120
+#define CSI2RX_PPI_ERRSYNCESC			0x124
+#define CSI2RX_PPI_ERRCONTROL			0x128
+#define CSI2RX_CFG_DISABLE_PAYLOAD_0		0x12c
+#define CSI2RX_CFG_VID_P_FIFO_SEND_LEVEL	0x188
+#define CSI2RX_CFG_DISABLE_PAYLOAD_1		0x130
+
+enum {
+	ST_POWERED	= 1,
+	ST_STREAMING	= 2,
+	ST_SUSPENDED	= 4,
+};
+
+static const char * const imx8mq_mipi_csi_clk_id[] = {
+	"core",
+	"esc",
+	"ui",
+};
+
+#define CSI2_NUM_CLKS	ARRAY_SIZE(imx8mq_mipi_csi_clk_id)
+
+#define	GPR_CSI2_1_RX_ENABLE		BIT(13)
+#define	GPR_CSI2_1_VID_INTFC_ENB	BIT(12)
+#define	GPR_CSI2_1_HSEL			BIT(10)
+#define	GPR_CSI2_1_CONT_CLK_MODE	BIT(8)
+#define	GPR_CSI2_1_S_PRG_RXHS_SETTLE(x)	(((x) & 0x3f) << 2)
+
+/*
+ * The send level configures the number of entries that must accumulate in
+ * the Pixel FIFO before the data will be transferred to the video output.
+ * See https://community.nxp.com/t5/i-MX-Processors/IMX8M-MIPI-CSI-Host-Controller-send-level/m-p/864005/highlight/true#M131704
+ */
+#define CSI2RX_SEND_LEVEL			64
+
+struct csi_state {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk_bulk_data clks[CSI2_NUM_CLKS];
+	struct reset_control *rst;
+	struct regulator *mipi_phy_regulator;
+
+	struct v4l2_subdev sd;
+	struct media_pad pads[MIPI_CSI2_PADS_NUM];
+	struct v4l2_async_notifier notifier;
+	struct v4l2_subdev *src_sd;
+
+	struct v4l2_fwnode_bus_mipi_csi2 bus;
+
+	struct mutex lock; /* Protect csi2_fmt, format_mbus, state, hs_settle */
+	const struct csi2_pix_format *csi2_fmt;
+	struct v4l2_mbus_framefmt format_mbus[MIPI_CSI2_PADS_NUM];
+	u32 state;
+	u32 hs_settle;
+
+	struct regmap *phy_gpr;
+	u8 phy_gpr_reg;
+
+	struct icc_path			*icc_path;
+	s32				icc_path_bw;
+};
+
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+struct csi2_pix_format {
+	u32 code;
+	u8 width;
+};
+
+static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
+	/* RAW (Bayer and greyscale) formats. */
+	{
+		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_Y8_1X8,
+		.width = 8,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_Y10_1X10,
+		.width = 10,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_Y12_1X12,
+		.width = 12,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
+		.width = 14,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
+		.width = 14,
+	}, {
+	/* YUV formats */
+		.code = MEDIA_BUS_FMT_YUYV8_2X8,
+		.width = 16,
+	}, {
+		.code = MEDIA_BUS_FMT_YUYV8_1X16,
+		.width = 16,
+	}
+};
+
+static const struct csi2_pix_format *find_csi2_format(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(imx8mq_mipi_csi_formats); i++)
+		if (code == imx8mq_mipi_csi_formats[i].code)
+			return &imx8mq_mipi_csi_formats[i];
+	return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static inline void imx8mq_mipi_csi_write(struct csi_state *state, u32 reg, u32 val)
+{
+	writel(val, state->regs + reg);
+}
+
+static int imx8mq_mipi_csi_sw_reset(struct csi_state *state)
+{
+	int ret;
+
+	/*
+	 * these are most likely self-clearing reset bits. to make it
+	 * more clear, the reset-imx7 driver should implement the
+	 * .reset() operation.
+	 */
+	ret = reset_control_assert(state->rst);
+	if (ret < 0) {
+		dev_err(state->dev, "Failed to assert resets: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void imx8mq_mipi_csi_system_enable(struct csi_state *state, int on)
+{
+	if (!on) {
+		imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
+		return;
+	}
+
+	regmap_update_bits(state->phy_gpr,
+			   state->phy_gpr_reg,
+			   0x3fff,
+			   GPR_CSI2_1_RX_ENABLE |
+			   GPR_CSI2_1_VID_INTFC_ENB |
+			   GPR_CSI2_1_HSEL |
+			   GPR_CSI2_1_CONT_CLK_MODE |
+			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(state->hs_settle));
+}
+
+static void imx8mq_mipi_csi_set_params(struct csi_state *state)
+{
+	int lanes = state->bus.num_data_lanes;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_NUM_LANES, lanes - 1);
+	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES,
+			      (0xf << lanes) & 0xf);
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK, CSI2RX_IRQ_MASK_ALL);
+	imx8mq_mipi_csi_write(state, 0x180, 1);
+	/* vid_vc */
+	imx8mq_mipi_csi_write(state, 0x184, 1);
+	imx8mq_mipi_csi_write(state, 0x188, CSI2RX_SEND_LEVEL);
+}
+
+static int imx8mq_mipi_csi_clk_enable(struct csi_state *state)
+{
+	return clk_bulk_prepare_enable(CSI2_NUM_CLKS, state->clks);
+}
+
+static void imx8mq_mipi_csi_clk_disable(struct csi_state *state)
+{
+	clk_bulk_disable_unprepare(CSI2_NUM_CLKS, state->clks);
+}
+
+static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
+{
+	unsigned int i;
+
+	for (i = 0; i < CSI2_NUM_CLKS; i++)
+		state->clks[i].id = imx8mq_mipi_csi_clk_id[i];
+
+	return devm_clk_bulk_get(state->dev, CSI2_NUM_CLKS, state->clks);
+}
+
+static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state)
+{
+	s64 link_freq;
+	u32 lane_rate;
+
+	/* Calculate the line rate from the pixel rate. */
+	link_freq = v4l2_get_link_freq(state->src_sd->ctrl_handler,
+				       state->csi2_fmt->width,
+				       state->bus.num_data_lanes * 2);
+	if (link_freq < 0) {
+		dev_err(state->dev, "Unable to obtain link frequency: %d\n",
+			(int)link_freq);
+		return link_freq;
+	}
+
+	lane_rate = link_freq * 2;
+	if (lane_rate < 80000000 || lane_rate > 1500000000) {
+		dev_dbg(state->dev, "Out-of-bound lane rate %u\n", lane_rate);
+		return -EINVAL;
+	}
+
+	/*
+	 * The following table is the source for this:
+	 * https://community.nxp.com/t5/i-MX-Processors/Explenation-for-HS-SETTLE-parameter-in-MIPI-CSI-D-PHY-registers/m-p/764275/highlight/true#M118744
+	 * but it would be even better to calculate the value for any
+	 * given datarate.
+	 */
+	if (lane_rate < 250000000)
+		state->hs_settle = 0xb;
+	else if (lane_rate < 500000000)
+		state->hs_settle = 0x8;
+	else
+		state->hs_settle = 0x6;
+
+	dev_dbg(state->dev, "start stream: lane rate %u hs_settle %u\n",
+		lane_rate, state->hs_settle);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_start_stream(struct csi_state *state)
+{
+	int ret;
+
+	ret = imx8mq_mipi_csi_sw_reset(state);
+	if (ret)
+		return ret;
+
+	imx8mq_mipi_csi_set_params(state);
+	imx8mq_mipi_csi_calc_hs_settle(state);
+	imx8mq_mipi_csi_system_enable(state, true);
+
+	return 0;
+}
+
+static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
+{
+	imx8mq_mipi_csi_system_enable(state, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static struct csi_state *mipi_sd_to_csi2_state(struct v4l2_subdev *sdev)
+{
+	return container_of(sdev, struct csi_state, sd);
+}
+
+static int imx8mq_mipi_csi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK,
+			      CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE);
+
+	if (enable) {
+		ret = pm_runtime_resume_and_get(state->dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (enable) {
+		if (state->state & ST_SUSPENDED) {
+			ret = -EBUSY;
+			goto unlock;
+		}
+
+		ret = imx8mq_mipi_csi_start_stream(state);
+		if (ret < 0)
+			goto unlock;
+
+		ret = v4l2_subdev_call(state->src_sd, video, s_stream, 1);
+		if (ret < 0)
+			goto unlock;
+
+		state->state |= ST_STREAMING;
+	} else {
+		v4l2_subdev_call(state->src_sd, video, s_stream, 0);
+		imx8mq_mipi_csi_stop_stream(state);
+		state->state &= ~ST_STREAMING;
+	}
+
+unlock:
+	mutex_unlock(&state->lock);
+
+	if (!enable || ret < 0)
+		pm_runtime_put(state->dev);
+
+	return ret;
+}
+
+static struct v4l2_mbus_framefmt *
+imx8mq_mipi_csi_get_format(struct csi_state *state,
+			   struct v4l2_subdev_state *sd_state,
+			   enum v4l2_subdev_format_whence which,
+			   unsigned int pad)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(&state->sd, sd_state, pad);
+
+	return &state->format_mbus[pad];
+}
+
+static int imx8mq_mipi_csi_init_cfg(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_state *sd_state)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt_sink;
+	struct v4l2_mbus_framefmt *fmt_source;
+	enum v4l2_subdev_format_whence which;
+
+	which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt_sink = imx8mq_mipi_csi_get_format(state, sd_state, which,
+					      MIPI_CSI2_PAD_SINK);
+
+	fmt_sink->code = MEDIA_BUS_FMT_SGBRG10_1X10;
+	fmt_sink->width = MIPI_CSI2_DEF_PIX_WIDTH;
+	fmt_sink->height = MIPI_CSI2_DEF_PIX_HEIGHT;
+	fmt_sink->field = V4L2_FIELD_NONE;
+
+	fmt_sink->colorspace = V4L2_COLORSPACE_RAW;
+	fmt_sink->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt_sink->colorspace);
+	fmt_sink->quantization =
+		V4L2_MAP_QUANTIZATION_DEFAULT(false, fmt_sink->colorspace,
+					      fmt_sink->ycbcr_enc);
+
+	fmt_source = imx8mq_mipi_csi_get_format(state, sd_state, which,
+						MIPI_CSI2_PAD_SOURCE);
+	*fmt_source = *fmt_sink;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_get_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *sd_state,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct v4l2_mbus_framefmt *fmt;
+
+	fmt = imx8mq_mipi_csi_get_format(state, sd_state, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	sdformat->format = *fmt;
+
+	mutex_unlock(&state->lock);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd,
+					  struct v4l2_subdev_state *sd_state,
+					  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/*
+	 * We can't transcode in any way, the source format is identical
+	 * to the sink format.
+	 */
+	if (code->pad == MIPI_CSI2_PAD_SOURCE) {
+		struct v4l2_mbus_framefmt *fmt;
+
+		if (code->index > 0)
+			return -EINVAL;
+
+		fmt = imx8mq_mipi_csi_get_format(state, sd_state, code->which,
+						 code->pad);
+		code->code = fmt->code;
+		return 0;
+	}
+
+	if (code->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	if (code->index >= ARRAY_SIZE(imx8mq_mipi_csi_formats))
+		return -EINVAL;
+
+	code->code = imx8mq_mipi_csi_formats[code->index].code;
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_set_fmt(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *sd_state,
+				   struct v4l2_subdev_format *sdformat)
+{
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	struct csi2_pix_format const *csi2_fmt;
+	struct v4l2_mbus_framefmt *fmt;
+
+	/*
+	 * The device can't transcode in any way, the source format can't be
+	 * modified.
+	 */
+	if (sdformat->pad == MIPI_CSI2_PAD_SOURCE)
+		return imx8mq_mipi_csi_get_fmt(sd, sd_state, sdformat);
+
+	if (sdformat->pad != MIPI_CSI2_PAD_SINK)
+		return -EINVAL;
+
+	csi2_fmt = find_csi2_format(sdformat->format.code);
+	if (!csi2_fmt)
+		csi2_fmt = &imx8mq_mipi_csi_formats[0];
+
+	fmt = imx8mq_mipi_csi_get_format(state, sd_state, sdformat->which,
+					 sdformat->pad);
+
+	mutex_lock(&state->lock);
+
+	fmt->code = csi2_fmt->code;
+	fmt->width = sdformat->format.width;
+	fmt->height = sdformat->format.height;
+
+	sdformat->format = *fmt;
+
+	/* Propagate the format from sink to source. */
+	fmt = imx8mq_mipi_csi_get_format(state, sd_state, sdformat->which,
+					 MIPI_CSI2_PAD_SOURCE);
+	*fmt = sdformat->format;
+
+	/* Store the CSI2 format descriptor for active formats. */
+	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		state->csi2_fmt = csi2_fmt;
+
+	mutex_unlock(&state->lock);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx8mq_mipi_csi_video_ops = {
+	.s_stream	= imx8mq_mipi_csi_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx8mq_mipi_csi_pad_ops = {
+	.init_cfg		= imx8mq_mipi_csi_init_cfg,
+	.enum_mbus_code		= imx8mq_mipi_csi_enum_mbus_code,
+	.get_fmt		= imx8mq_mipi_csi_get_fmt,
+	.set_fmt		= imx8mq_mipi_csi_set_fmt,
+};
+
+static const struct v4l2_subdev_ops imx8mq_mipi_csi_subdev_ops = {
+	.video	= &imx8mq_mipi_csi_video_ops,
+	.pad	= &imx8mq_mipi_csi_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+static const struct media_entity_operations imx8mq_mipi_csi_entity_ops = {
+	.link_validate	= v4l2_subdev_link_validate,
+	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async subdev notifier
+ */
+
+static struct csi_state *
+mipi_notifier_to_csi2_state(struct v4l2_async_notifier *n)
+{
+	return container_of(n, struct csi_state, notifier);
+}
+
+static int imx8mq_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier,
+					struct v4l2_subdev *sd,
+					struct v4l2_async_subdev *asd)
+{
+	struct csi_state *state = mipi_notifier_to_csi2_state(notifier);
+	struct media_pad *sink = &state->sd.entity.pads[MIPI_CSI2_PAD_SINK];
+
+	state->src_sd = sd;
+
+	return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED |
+					       MEDIA_LNK_FL_IMMUTABLE);
+}
+
+static const struct v4l2_async_notifier_operations imx8mq_mipi_csi_notify_ops = {
+	.bound = imx8mq_mipi_csi_notify_bound,
+};
+
+static int imx8mq_mipi_csi_async_register(struct csi_state *state)
+{
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	struct v4l2_async_subdev *asd;
+	struct fwnode_handle *ep;
+	unsigned int i;
+	int ret;
+
+	v4l2_async_notifier_init(&state->notifier);
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(state->dev), 0, 0,
+					     FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!ep)
+		return -ENOTCONN;
+
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (ret)
+		goto err_parse;
+
+	for (i = 0; i < vep.bus.mipi_csi2.num_data_lanes; ++i) {
+		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1) {
+			dev_err(state->dev,
+				"data lanes reordering is not supported");
+			ret = -EINVAL;
+			goto err_parse;
+		}
+	}
+
+	state->bus = vep.bus.mipi_csi2;
+
+	dev_dbg(state->dev, "data lanes: %d flags: 0x%08x\n",
+		state->bus.num_data_lanes,
+		state->bus.flags);
+
+	asd = v4l2_async_notifier_add_fwnode_remote_subdev(&state->notifier,
+							   ep, struct v4l2_async_subdev);
+	if (IS_ERR(asd)) {
+		ret = PTR_ERR(asd);
+		goto err_parse;
+	}
+
+	fwnode_handle_put(ep);
+
+	state->notifier.ops = &imx8mq_mipi_csi_notify_ops;
+
+	ret = v4l2_async_subdev_notifier_register(&state->sd, &state->notifier);
+	if (ret)
+		return ret;
+
+	return v4l2_async_register_subdev(&state->sd);
+
+err_parse:
+	fwnode_handle_put(ep);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Suspend/resume
+ */
+
+static int imx8mq_mipi_csi_pm_suspend(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	mutex_lock(&state->lock);
+
+	if (state->state & ST_POWERED) {
+		imx8mq_mipi_csi_stop_stream(state);
+		imx8mq_mipi_csi_clk_disable(state);
+		state->state &= ~ST_POWERED;
+		if (!runtime)
+			state->state |= ST_SUSPENDED;
+	}
+
+	mutex_unlock(&state->lock);
+
+	ret = icc_set_bw(state->icc_path, 0, 0);
+	if (ret)
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int imx8mq_mipi_csi_pm_resume(struct device *dev, bool runtime)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+	int ret = 0;
+
+	ret = icc_set_bw(state->icc_path, 0, state->icc_path_bw);
+	if (ret) {
+		dev_err(dev, "icc_set_bw failed with %d\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&state->lock);
+
+	if (!runtime && !(state->state & ST_SUSPENDED))
+		goto unlock;
+
+	if (!(state->state & ST_POWERED)) {
+		state->state |= ST_POWERED;
+		ret = imx8mq_mipi_csi_clk_enable(state);
+	}
+	if (state->state & ST_STREAMING) {
+		ret = imx8mq_mipi_csi_start_stream(state);
+		if (ret)
+			goto unlock;
+	}
+
+	state->state &= ~ST_SUSPENDED;
+
+unlock:
+	mutex_unlock(&state->lock);
+
+	return ret ? -EAGAIN : 0;
+}
+
+static int __maybe_unused imx8mq_mipi_csi_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, false);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_suspend(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_suspend(dev, true);
+}
+
+static int __maybe_unused imx8mq_mipi_csi_runtime_resume(struct device *dev)
+{
+	return imx8mq_mipi_csi_pm_resume(dev, true);
+}
+
+static const struct dev_pm_ops imx8mq_mipi_csi_pm_ops = {
+	SET_RUNTIME_PM_OPS(imx8mq_mipi_csi_runtime_suspend,
+			   imx8mq_mipi_csi_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(imx8mq_mipi_csi_suspend, imx8mq_mipi_csi_resume)
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe/remove & platform driver
+ */
+
+static int imx8mq_mipi_csi_subdev_init(struct csi_state *state)
+{
+	struct v4l2_subdev *sd = &state->sd;
+
+	v4l2_subdev_init(sd, &imx8mq_mipi_csi_subdev_ops);
+	sd->owner = THIS_MODULE;
+	snprintf(sd->name, sizeof(sd->name), "%s %s",
+		 MIPI_CSI2_SUBDEV_NAME, dev_name(state->dev));
+
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	sd->entity.ops = &imx8mq_mipi_csi_entity_ops;
+
+	sd->dev = state->dev;
+
+	state->csi2_fmt = &imx8mq_mipi_csi_formats[0];
+	imx8mq_mipi_csi_init_cfg(sd, NULL);
+
+	state->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
+					 | MEDIA_PAD_FL_MUST_CONNECT;
+	state->pads[MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE
+					   | MEDIA_PAD_FL_MUST_CONNECT;
+	return media_entity_pads_init(&sd->entity, MIPI_CSI2_PADS_NUM,
+				      state->pads);
+}
+
+static void imx8mq_mipi_csi_release_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	icc_put(state->icc_path);
+}
+
+static int imx8mq_mipi_csi_init_icc(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	/* Optional interconnect request */
+	state->icc_path = of_icc_get(&pdev->dev, "dram");
+	if (IS_ERR_OR_NULL(state->icc_path))
+		return PTR_ERR_OR_ZERO(state->icc_path);
+
+	state->icc_path_bw = MBps_to_icc(700);
+
+	return 0;
+}
+
+static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
+{
+	struct device *dev = state->dev;
+	struct device_node *np = state->dev->of_node;
+	struct device_node *node;
+	phandle ph;
+	u32 out_val[2];
+	int ret = 0;
+
+	state->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(state->rst)) {
+		dev_err(dev, "Failed to get reset: %pe\n", state->rst);
+		return PTR_ERR(state->rst);
+	}
+
+	ret = of_property_read_u32_array(np, "fsl,mipi-phy-gpr", out_val,
+					 ARRAY_SIZE(out_val));
+	if (ret) {
+		dev_err(dev, "no fsl,mipi-phy-gpr property found: %d\n", ret);
+		return ret;
+	}
+
+	ph = *out_val;
+
+	node = of_find_node_by_phandle(ph);
+	if (!node) {
+		dev_err(dev, "Error finding node by phandle\n");
+		return -ENODEV;
+	}
+	state->phy_gpr = syscon_node_to_regmap(node);
+	of_node_put(node);
+	if (IS_ERR(state->phy_gpr)) {
+		dev_err(dev, "failed to get gpr regmap: %pe\n", state->phy_gpr);
+		return PTR_ERR(state->phy_gpr);
+	}
+
+	state->phy_gpr_reg = out_val[1];
+	dev_dbg(dev, "phy gpr register set to 0x%x\n", state->phy_gpr_reg);
+
+	return ret;
+}
+
+static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct csi_state *state;
+	int ret;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	state->dev = dev;
+
+	ret = imx8mq_mipi_csi_parse_dt(state);
+	if (ret < 0) {
+		dev_err(dev, "Failed to parse device tree: %d\n", ret);
+		return ret;
+	}
+
+	/* Acquire resources. */
+	state->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	ret = imx8mq_mipi_csi_clk_get(state);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, &state->sd);
+
+	mutex_init(&state->lock);
+
+	ret = imx8mq_mipi_csi_subdev_init(state);
+	if (ret < 0)
+		goto mutex;
+
+	ret = imx8mq_mipi_csi_init_icc(pdev);
+	if (ret)
+		goto mutex;
+
+	/* Enable runtime PM. */
+	pm_runtime_enable(dev);
+	if (!pm_runtime_enabled(dev)) {
+		ret = imx8mq_mipi_csi_pm_resume(dev, true);
+		if (ret < 0)
+			goto icc;
+	}
+
+	ret = imx8mq_mipi_csi_async_register(state);
+	if (ret < 0)
+		goto cleanup;
+
+	return 0;
+
+cleanup:
+	pm_runtime_disable(&pdev->dev);
+	imx8mq_mipi_csi_pm_suspend(&pdev->dev, true);
+
+	media_entity_cleanup(&state->sd.entity);
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+icc:
+	imx8mq_mipi_csi_release_icc(pdev);
+mutex:
+	mutex_destroy(&state->lock);
+
+	return ret;
+}
+
+static int imx8mq_mipi_csi_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
+	struct csi_state *state = mipi_sd_to_csi2_state(sd);
+
+	v4l2_async_notifier_unregister(&state->notifier);
+	v4l2_async_notifier_cleanup(&state->notifier);
+	v4l2_async_unregister_subdev(&state->sd);
+
+	pm_runtime_disable(&pdev->dev);
+	imx8mq_mipi_csi_pm_suspend(&pdev->dev, true);
+	media_entity_cleanup(&state->sd.entity);
+	mutex_destroy(&state->lock);
+	pm_runtime_set_suspended(&pdev->dev);
+	imx8mq_mipi_csi_release_icc(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
+	{ .compatible = "fsl,imx8mq-mipi-csi2", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);
+
+static struct platform_driver imx8mq_mipi_csi_driver = {
+	.probe		= imx8mq_mipi_csi_probe,
+	.remove		= imx8mq_mipi_csi_remove,
+	.driver		= {
+		.of_match_table = imx8mq_mipi_csi_of_match,
+		.name		= MIPI_CSI2_DRIVER_NAME,
+		.pm		= &imx8mq_mipi_csi_pm_ops,
+	},
+};
+
+module_platform_driver(imx8mq_mipi_csi_driver);
+
+MODULE_DESCRIPTION("i.MX8MQ MIPI CSI-2 receiver driver");
+MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@puri.sm>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx8mq-mipi-csi2");
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
  2021-07-16 10:22 ` Martin Kepplinger
@ 2021-07-16 10:22   ` Martin Kepplinger
  -1 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2
receiver (new driver) and the CSI Bridge that provides the user buffers
(existing driver).

An image sensor is to be connected to the MIPIs' second port, to be described
in board files.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 91df9c5350ae..e026a39bddce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1099,6 +1099,110 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mipi_csi1: csi@30a70000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30a70000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				   <&clk IMX8MQ_CLK_CSI1_ESC>,
+				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI1_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi1>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi1_mipi_ep: endpoint {
+							remote-endpoint = <&csi1_ep>;
+						};
+					};
+				};
+			};
+
+			csi1: csi@30a90000 {
+				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi1_ep: endpoint {
+						remote-endpoint = <&csi1_mipi_ep>;
+					};
+				};
+			};
+
+			mipi_csi2: csi@30b60000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30b60000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				   <&clk IMX8MQ_CLK_CSI2_ESC>,
+				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI2_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi2>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
+				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi2_mipi_ep: endpoint {
+							remote-endpoint = <&csi2_ep>;
+						};
+					};
+				};
+			};
+
+			csi2: csi@30b80000 {
+				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				reg = <0x30b80000 0x10000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi2_ep: endpoint {
+						remote-endpoint = <&csi2_mipi_ep>;
+					};
+				};
+			};
+
 			mu: mailbox@30aa0000 {
 				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
 				reg = <0x30aa0000 0x10000>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v7 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
@ 2021-07-16 10:22   ` Martin Kepplinger
  0 siblings, 0 replies; 10+ messages in thread
From: Martin Kepplinger @ 2021-07-16 10:22 UTC (permalink / raw)
  To: laurent.pinchart, shawnguo
  Cc: devicetree, festevam, kernel, kernel, krzk, linux-arm-kernel,
	linux-imx, linux-kernel, linux-media, linux-staging, m.felsch,
	mchehab, phone-devel, robh, slongerbeam, Martin Kepplinger

Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2
receiver (new driver) and the CSI Bridge that provides the user buffers
(existing driver).

An image sensor is to be connected to the MIPIs' second port, to be described
in board files.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 91df9c5350ae..e026a39bddce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1099,6 +1099,110 @@ uart4: serial@30a60000 {
 				status = "disabled";
 			};
 
+			mipi_csi1: csi@30a70000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30a70000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				   <&clk IMX8MQ_CLK_CSI1_ESC>,
+				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI1_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi1>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi1_mipi_ep: endpoint {
+							remote-endpoint = <&csi1_ep>;
+						};
+					};
+				};
+			};
+
+			csi1: csi@30a90000 {
+				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi1_ep: endpoint {
+						remote-endpoint = <&csi1_mipi_ep>;
+					};
+				};
+			};
+
+			mipi_csi2: csi@30b60000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30b60000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				   <&clk IMX8MQ_CLK_CSI2_ESC>,
+				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI2_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi2>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
+				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csi2_mipi_ep: endpoint {
+							remote-endpoint = <&csi2_ep>;
+						};
+					};
+				};
+			};
+
+			csi2: csi@30b80000 {
+				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				reg = <0x30b80000 0x10000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi2_ep: endpoint {
+						remote-endpoint = <&csi2_mipi_ep>;
+					};
+				};
+			};
+
 			mu: mailbox@30aa0000 {
 				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
 				reg = <0x30aa0000 0x10000>;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v7 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
  2021-07-16 10:22   ` [PATCH v7 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 " Martin Kepplinger
@ 2021-07-16 10:48     ` Laurent Pinchart
  -1 siblings, 0 replies; 10+ messages in thread
From: Laurent Pinchart @ 2021-07-16 10:48 UTC (permalink / raw)
  To: Martin Kepplinger
  Cc: shawnguo, devicetree, festevam, kernel, kernel, krzk,
	linux-arm-kernel, linux-imx, linux-kernel, linux-media,
	linux-staging, m.felsch, mchehab, phone-devel, robh, slongerbeam

Hi Martin,

Thank you for the patch.

On Fri, Jul 16, 2021 at 12:22:42PM +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> Reviewed-by: Rob Herring <robh@kernel.org>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++++++++++++++++
>  1 file changed, 174 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..9c04fa85ee5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -0,0 +1,174 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8MQ MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Martin Kepplinger <martin.kepplinger@puri.sm>
> +
> +description: |-
> +  This binding covers the CSI-2 RX PHY and host controller included in the
> +  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
> +  input imaging devices.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mq-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: core is the RX Controller Core Clock input. This clock
> +                     must be exactly equal to or faster than the receive
> +                     byteclock from the RX DPHY.
> +      - description: esc is the Rx Escape Clock. This must be the same escape
> +                     clock that the RX DPHY receives.
> +      - description: ui is the pixel clock (phy_ref up to 333Mhz).
> +                     See the reference manual for details.
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: esc
> +      - const: ui
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CORE_RESET reset register bit definition
> +      - description: PHY_REF_RESET reset register bit definition
> +      - description: ESC_RESET reset register bit definition
> +
> +  fsl,mipi-phy-gpr:
> +    description: |
> +      The phandle to the imx8mq syscon iomux-gpr with the register
> +      for setting RX_ENABLE for the mipi receiver.
> +
> +      The format should be as follows:
> +      <gpr req_gpr>
> +      gpr is the phandle to general purpose register node.
> +      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:
> +        - description: The 'gpr' is the phandle to general purpose register node.
> +        - description: The 'req_gpr' is the gpr register offset containing
> +                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
> +          maximum: 0xff
> +
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    const: dram
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                items:
> +                  minItems: 1
> +                  maxItems: 4
> +                  items:
> +                    - const: 1
> +                    - const: 2
> +                    - const: 3
> +                    - const: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - fsl,mipi-phy-gpr
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interconnect/imx8mq.h>
> +    #include <dt-bindings/reset/imx8mq-reset.h>
> +
> +    csi@30a70000 {
> +        compatible = "fsl,imx8mq-mipi-csi2";
> +        reg = <0x30a70000 0x1000>;
> +        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                 <&clk IMX8MQ_CLK_CSI1_ESC>,
> +                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
> +        clock-names = "core", "esc", "ui";
> +        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                          <&clk IMX8MQ_CLK_CSI1_ESC>;
> +        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
> +        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> +                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
> +                                 <&clk IMX8MQ_SYS1_PLL_800M>;
> +        power-domains = <&pgc_mipi_csi1>;
> +        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
> +                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
> +                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
> +        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
> +        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
> +        interconnect-names = "dram";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                imx8mm_mipi_csi_in: endpoint {
> +                    remote-endpoint = <&imx477_out>;
> +                    data-lanes = <1 2 3 4>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +
> +                imx8mm_mipi_csi_out: endpoint {
> +                    remote-endpoint = <&csi_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...

-- 
Regards,

Laurent Pinchart

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v7 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
@ 2021-07-16 10:48     ` Laurent Pinchart
  0 siblings, 0 replies; 10+ messages in thread
From: Laurent Pinchart @ 2021-07-16 10:48 UTC (permalink / raw)
  To: Martin Kepplinger
  Cc: shawnguo, devicetree, festevam, kernel, kernel, krzk,
	linux-arm-kernel, linux-imx, linux-kernel, linux-media,
	linux-staging, m.felsch, mchehab, phone-devel, robh, slongerbeam

Hi Martin,

Thank you for the patch.

On Fri, Jul 16, 2021 at 12:22:42PM +0200, Martin Kepplinger wrote:
> The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
> describe the DT bindings for it.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> Reviewed-by: Rob Herring <robh@kernel.org>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 ++++++++++++++++++
>  1 file changed, 174 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..9c04fa85ee5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -0,0 +1,174 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8MQ MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Martin Kepplinger <martin.kepplinger@puri.sm>
> +
> +description: |-
> +  This binding covers the CSI-2 RX PHY and host controller included in the
> +  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
> +  input imaging devices.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8mq-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: core is the RX Controller Core Clock input. This clock
> +                     must be exactly equal to or faster than the receive
> +                     byteclock from the RX DPHY.
> +      - description: esc is the Rx Escape Clock. This must be the same escape
> +                     clock that the RX DPHY receives.
> +      - description: ui is the pixel clock (phy_ref up to 333Mhz).
> +                     See the reference manual for details.
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: esc
> +      - const: ui
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CORE_RESET reset register bit definition
> +      - description: PHY_REF_RESET reset register bit definition
> +      - description: ESC_RESET reset register bit definition
> +
> +  fsl,mipi-phy-gpr:
> +    description: |
> +      The phandle to the imx8mq syscon iomux-gpr with the register
> +      for setting RX_ENABLE for the mipi receiver.
> +
> +      The format should be as follows:
> +      <gpr req_gpr>
> +      gpr is the phandle to general purpose register node.
> +      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:
> +        - description: The 'gpr' is the phandle to general purpose register node.
> +        - description: The 'req_gpr' is the gpr register offset containing
> +                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
> +          maximum: 0xff
> +
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    const: dram
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                items:
> +                  minItems: 1
> +                  maxItems: 4
> +                  items:
> +                    - const: 1
> +                    - const: 2
> +                    - const: 3
> +                    - const: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - fsl,mipi-phy-gpr
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interconnect/imx8mq.h>
> +    #include <dt-bindings/reset/imx8mq-reset.h>
> +
> +    csi@30a70000 {
> +        compatible = "fsl,imx8mq-mipi-csi2";
> +        reg = <0x30a70000 0x1000>;
> +        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                 <&clk IMX8MQ_CLK_CSI1_ESC>,
> +                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
> +        clock-names = "core", "esc", "ui";
> +        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
> +                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
> +                          <&clk IMX8MQ_CLK_CSI1_ESC>;
> +        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
> +        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
> +                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
> +                                 <&clk IMX8MQ_SYS1_PLL_800M>;
> +        power-domains = <&pgc_mipi_csi1>;
> +        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
> +                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
> +                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
> +        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
> +        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
> +        interconnect-names = "dram";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                imx8mm_mipi_csi_in: endpoint {
> +                    remote-endpoint = <&imx477_out>;
> +                    data-lanes = <1 2 3 4>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +
> +                imx8mm_mipi_csi_out: endpoint {
> +                    remote-endpoint = <&csi_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...

-- 
Regards,

Laurent Pinchart

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-07-16 10:50 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-16 10:22 [PATCH v7 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger
2021-07-16 10:22 ` Martin Kepplinger
2021-07-16 10:22 ` [PATCH v7 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
2021-07-16 10:22   ` [PATCH v7 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 " Martin Kepplinger
2021-07-16 10:48   ` [PATCH v7 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 " Laurent Pinchart
2021-07-16 10:48     ` Laurent Pinchart
2021-07-16 10:22 ` [PATCH v7 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
2021-07-16 10:22   ` Martin Kepplinger
2021-07-16 10:22 ` [PATCH v7 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
2021-07-16 10:22   ` Martin Kepplinger

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.