All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	Mike Tipton <mdtipton@codeaurora.org>,
	Taniya Das <tdas@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH v2] clk: qcom: gdsc: Ensure regulator init state matches GDSC state
Date: Wed, 21 Jul 2021 15:40:56 -0700	[thread overview]
Message-ID: <20210721224056.3035016-1-bjorn.andersson@linaro.org> (raw)

As GDSCs are registered and found to be already enabled gdsc_init()
ensures that 1) the kernel state matches the hardware state, and 2)
votable GDSCs are properly enabled from this master as well.

But as the (optional) supply regulator is enabled deep into
gdsc_toggle_logic(), which is only executed for votable GDSCs the
kernel's state of the regulator might not match the hardware. The
regulator might be automatically turned off if no other users are
present or the next call to gdsc_disable() would cause an unbalanced
regulator_disable().

But as the votable case deals with an already enabled GDSC, most of
gdsc_enable() and gdsc_toggle_logic() can be skipped. Reducing it to
just clearing the SW_COLLAPSE_MASK and enabling hardware control allow
us to simply call regulator_enable() in both cases.

The enablement of hardware control seems to be an independent property
from the GDSC being enabled, so this is moved outside that conditional
segment.

Lastly, as the propagation of ALWAY_ON to GENPD_FLAG_ALWAYS_ON needs to
happen regardless of the initial state this is grouped together with the
other sc->pd updates at the end of the function.

Cc: stable@vger.kernel.org
Fixes: 37416e554961 ("clk: qcom: gdsc: Handle GDSC regulator supplies")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Refactored into if (on) else if (ALWAYS_ON) style
- Extracted relevant parts of gdsc_enable() to call under VOTABLE
- Turn on hwctrl if requested for non-votable gdscs

 drivers/clk/qcom/gdsc.c | 54 +++++++++++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 18 deletions(-)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index 51ed640e527b..4ece326ea233 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -357,27 +357,43 @@ static int gdsc_init(struct gdsc *sc)
 	if (on < 0)
 		return on;
 
-	/*
-	 * Votable GDSCs can be ON due to Vote from other masters.
-	 * If a Votable GDSC is ON, make sure we have a Vote.
-	 */
-	if ((sc->flags & VOTABLE) && on)
-		gdsc_enable(&sc->pd);
+	if (on) {
+		/* The regulator must be on, sync the kernel state */
+		if (sc->rsupply) {
+			ret = regulator_enable(sc->rsupply);
+			if (ret < 0)
+				return ret;
+		}
 
-	/*
-	 * Make sure the retain bit is set if the GDSC is already on, otherwise
-	 * we end up turning off the GDSC and destroying all the register
-	 * contents that we thought we were saving.
-	 */
-	if ((sc->flags & RETAIN_FF_ENABLE) && on)
-		gdsc_retain_ff_on(sc);
+		/*
+		 * Votable GDSCs can be ON due to Vote from other masters.
+		 * If a Votable GDSC is ON, make sure we have a Vote.
+		 */
+		if (sc->flags & VOTABLE) {
+			ret = regmap_update_bits(sc->regmap, sc->gdscr,
+						 SW_COLLAPSE_MASK, val);
+			if (ret)
+				return ret;
+		}
+
+		/* Turn on HW trigger mode if supported */
+		if (sc->flags & HW_CTRL) {
+			ret = gdsc_hwctrl(sc, true);
+			if (ret < 0)
+				return ret;
+		}
 
-	/* If ALWAYS_ON GDSCs are not ON, turn them ON */
-	if (sc->flags & ALWAYS_ON) {
-		if (!on)
-			gdsc_enable(&sc->pd);
+		/*
+		 * Make sure the retain bit is set if the GDSC is already on,
+		 * otherwise we end up turning off the GDSC and destroying all
+		 * the register contents that we thought we were saving.
+		 */
+		if (sc->flags & RETAIN_FF_ENABLE)
+			gdsc_retain_ff_on(sc);
+	} else if (sc->flags & ALWAYS_ON) {
+		/* If ALWAYS_ON GDSCs are not ON, turn them ON */
+		gdsc_enable(&sc->pd);
 		on = true;
-		sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
 	}
 
 	if (on || (sc->pwrsts & PWRSTS_RET))
@@ -385,6 +401,8 @@ static int gdsc_init(struct gdsc *sc)
 	else
 		gdsc_clear_mem_on(sc);
 
+	if (sc->flags & ALWAYS_ON)
+		sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
 	if (!sc->pd.power_off)
 		sc->pd.power_off = gdsc_disable;
 	if (!sc->pd.power_on)
-- 
2.29.2


             reply	other threads:[~2021-07-21 22:42 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-21 22:40 Bjorn Andersson [this message]
2021-07-31  8:02 ` Stephen Boyd
2021-08-06  1:21 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210721224056.3035016-1-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mdtipton@codeaurora.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tdas@codeaurora.org \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v2] clk: qcom: gdsc: Ensure regulator init state matches GDSC state' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.