All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jason Lai <jasonlai.genesyslogic@gmail.com>
To: ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw,
	jason.lai@genesyslogiv.com.tw,
	AKASHI Takahiro <takahiro.akashi@linaro.org>
Subject: [RFC PATCH v3.2 06/29] mmc: core: UHS-II support, generate UHS-II SD command packet
Date: Thu, 22 Jul 2021 12:01:01 +0800	[thread overview]
Message-ID: <20210722040124.7573-6-jasonlai.genesyslogic@gmail.com> (raw)
In-Reply-To: <20210722040124.7573-1-jasonlai.genesyslogic@gmail.com>

In SD-TRAN protocol, legacy SD commands should be "encapsulated" in SD
packets as described in SD specification.
Please see section 7.1 and 7.2.1 in "UHS-II Simplified Addendum."

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 drivers/mmc/core/core.c | 18 +++++++++++
 drivers/mmc/core/uhs2.c | 70 +++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/core/uhs2.h |  1 +
 3 files changed, 89 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 300812c69e13..d53722c21f29 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -338,6 +338,8 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)

 int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
+	struct uhs2_command uhs2_cmd;
+	u32 payload[4]; /* for maximum size */
 	int err;

 	init_completion(&mrq->cmd_completion);
@@ -355,6 +357,13 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 	if (err)
 		return err;

+	if (host->flags & MMC_UHS2_SUPPORT &&
+	    host->flags & MMC_UHS2_INITIALIZED) {
+		uhs2_cmd.payload = payload;
+		mrq->cmd->uhs2_cmd = &uhs2_cmd;
+		uhs2_prepare_sd_cmd(host, mrq);
+	}
+
 	led_trigger_event(host->led, LED_FULL);
 	__mmc_start_request(host, mrq);

@@ -434,6 +443,8 @@ EXPORT_SYMBOL(mmc_wait_for_req_done);
  */
 int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
 {
+	struct uhs2_command uhs2_cmd;
+	u32 payload[4]; /* for maximum size */
 	int err;

 	/*
@@ -454,6 +465,13 @@ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
 	if (err)
 		goto out_err;

+	if (host->flags & MMC_UHS2_SUPPORT &&
+	    host->flags & MMC_UHS2_INITIALIZED) {
+		uhs2_cmd.payload = payload;
+		mrq->cmd->uhs2_cmd = &uhs2_cmd;
+		uhs2_prepare_sd_cmd(host, mrq);
+	}
+
 	err = host->cqe_ops->cqe_request(host, mrq);
 	if (err)
 		goto out_err;
diff --git a/drivers/mmc/core/uhs2.c b/drivers/mmc/core/uhs2.c
index acb46b5b57ef..1f6d0e0cf355 100644
--- a/drivers/mmc/core/uhs2.c
+++ b/drivers/mmc/core/uhs2.c
@@ -807,3 +807,73 @@ int mmc_uhs2_rescan_try_freq(struct mmc_host *host, unsigned int freq)
 	return err;
 }
 EXPORT_SYMBOL_GPL(mmc_uhs2_rescan_try_freq);
+
+/**
+ * uhs2_prepare_sd_cmd - prepare for SD command packet
+ * @host:	MMC host
+ * @mrq:	MMC request
+ *
+ * Initialize and fill in a header and a payload of SD command packet.
+ * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in
+ * advance.
+ *
+ * Return:	0 on success, non-zero error on failure
+ */
+int uhs2_prepare_sd_cmd(struct mmc_host *host, struct mmc_request *mrq)
+{
+	struct mmc_command *cmd;
+	struct uhs2_command *uhs2_cmd;
+	u16 header = 0, arg = 0;
+	u32 *payload;
+	u8 plen = 0;
+
+	cmd = mrq->cmd;
+	header = host->uhs2_dev_prop.node_id;
+	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
+		header |= UHS2_PACKET_TYPE_DCMD;
+	else
+		header |= UHS2_PACKET_TYPE_CCMD;
+
+	arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
+
+	uhs2_cmd = cmd->uhs2_cmd;
+	payload = uhs2_cmd->payload;
+	plen = 2; /* at the maximum */
+
+	if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC &&
+	    !cmd->uhs2_tmode0_flag) {
+		if (host->flags & MMC_UHS2_2L_HD)
+			arg |= UHS2_DCMD_2L_HD_MODE;
+
+		arg |= UHS2_DCMD_LM_TLEN_EXIST;
+
+		if (cmd->data->blocks == 1 &&
+		    cmd->data->blksz != 512 &&
+		    cmd->opcode != MMC_READ_SINGLE_BLOCK &&
+		    cmd->opcode != MMC_WRITE_BLOCK) {
+			arg |= UHS2_DCMD_TLUM_BYTE_MODE;
+			payload[1] = uhs2_dcmd_convert_msb(cmd->data->blksz);
+		} else {
+			payload[1] = uhs2_dcmd_convert_msb(cmd->data->blocks);
+		}
+
+		if (cmd->opcode == SD_IO_RW_EXTENDED) {
+			arg &= ~(UHS2_DCMD_LM_TLEN_EXIST |
+				UHS2_DCMD_TLUM_BYTE_MODE |
+				UHS2_NATIVE_DCMD_DAM_IO);
+			payload[1] = 0;
+			plen = 1;
+		}
+	} else {
+		plen = 1;
+	}
+
+	payload[0] = uhs2_dcmd_convert_msb(cmd->arg);
+	pr_debug("%s: %s: sd_cmd->arg = 0x%x, payload[0]= 0x%x.\n",
+		 mmc_hostname(host), __func__, cmd->arg, payload[0]);
+
+	uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uhs2_prepare_sd_cmd);
diff --git a/drivers/mmc/core/uhs2.h b/drivers/mmc/core/uhs2.h
index e3389d4dda3b..48486ba21062 100644
--- a/drivers/mmc/core/uhs2.h
+++ b/drivers/mmc/core/uhs2.h
@@ -16,5 +16,6 @@
 #define UHS2_PHY_INIT_ERR	1

 int mmc_uhs2_rescan_try_freq(struct mmc_host *host, unsigned int freq);
+int uhs2_prepare_sd_cmd(struct mmc_host *host, struct mmc_request *mrq);

 #endif /* MMC_UHS2_H */
--
2.32.0


  parent reply	other threads:[~2021-07-22  4:02 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-22  4:00 [RFC PATCH v3.2 01/29] mmc: add UHS-II related definitions in public headers Jason Lai
2021-07-22  4:00 ` [RFC PATCH v3.2 02/29] mmc: core: UHS-II support, modify power-up sequence Jason Lai
2021-07-22  4:00 ` [RFC PATCH v3.2 03/29] mmc: core: UHS-II support, skip set_chip_select() Jason Lai
2021-07-22  4:00 ` [RFC PATCH v3.2 04/29] mmc: core: UHS-II support, try to select UHS-II interface Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 05/29] mmc: core: UHS-II support, skip TMODE setup in some cases Jason Lai
2021-07-22  4:01 ` Jason Lai [this message]
2021-07-22  4:01 ` [RFC PATCH v3.2 07/29] mmc: core: UHS-II support, set APP_CMD bit if necessary Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 08/29] mmc: sdhci: add a kernel configuration for enabling UHS-II support Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 09/29] mmc: sdhci: add UHS-II related definitions in headers Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 10/29] mmc: sdhci: add UHS-II module Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 11/29] mmc: sdhci-uhs2: dump UHS-II registers Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 12/29] mmc: sdhci-uhs2: add reset function Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 13/29] mmc: sdhci-uhs2: add set_power() to support vdd2 Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 14/29] mmc: sdhci-uhs2: skip signal_voltage_switch() Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 15/29] mmc: sdhci-uhs2: add set_timeout() Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 16/29] mmc: sdhci-uhs2: add set_ios() Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 17/29] mmc: sdhci-uhs2: add detect_init() to detect the interface Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 18/29] mmc: sdhci-uhs2: add clock operations Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 19/29] mmc: sdhci-uhs2: add set_reg() to initialise the interface Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 20/29] mmc: sdhci-uhs2: add request() and others Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 21/29] mmc: sdhci-uhs2: add irq() " Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 22/29] mmc: sdhci-uhs2: add add_host() and others to set up the driver Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 23/29] mmc: sdhci-uhs2: add pre-detect_init hook Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 24/29] mmc: core: add post-mmc_attach_sd hook Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 25/29] mmc: sdhci-uhs2: " Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 26/29] mmc: sdhci-pci: add UHS-II support framework Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 27/29] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 28/29] mmc: Remove duplicate code Jason Lai
2021-07-22  4:01 ` [RFC PATCH v3.2 29/29] mmc: core: Apply Ulf's patch for supporting UHS-II card Jason Lai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210722040124.7573-6-jasonlai.genesyslogic@gmail.com \
    --to=jasonlai.genesyslogic@gmail.com \
    --cc=adrian.hunter@intel.com \
    --cc=ben.chuang@genesyslogic.com.tw \
    --cc=greg.tu@genesyslogic.com.tw \
    --cc=jason.lai@genesyslogiv.com.tw \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=takahiro.akashi@linaro.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.