From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: "Geert Uytterhoeven" <geert+renesas@glider.be>,
"Magnus Damm" <magnus.damm@gmail.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Rob Herring" <robh+dt@kernel.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh@kernel.org>
Subject: [PATCH v6 1/8] dt-bindings: media: max9286: Re-indent example
Date: Thu, 22 Jul 2021 11:12:32 +0200 [thread overview]
Message-ID: <20210722091239.26451-2-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20210722091239.26451-1-jacopo+renesas@jmondi.org>
The dt-bindings examples are usually indented with 4 spaces.
The maxim,max9286 schema has the example indented with only
2 spaces, re-indent it.
Cosmetic change only.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../bindings/media/i2c/maxim,max9286.yaml | 214 +++++++++---------
1 file changed, 107 insertions(+), 107 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index ee16102fdfe7..0e7162998b77 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -191,140 +191,140 @@ examples:
#include <dt-bindings/gpio/gpio.h>
i2c@e66d8000 {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg = <0 0xe66d8000>;
+ reg = <0 0xe66d8000>;
- gmsl-deserializer@2c {
- compatible = "maxim,max9286";
- reg = <0x2c>;
- poc-supply = <&camera_poc_12v>;
- enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ gmsl-deserializer@2c {
+ compatible = "maxim,max9286";
+ reg = <0x2c>;
+ poc-supply = <&camera_poc_12v>;
+ enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
- maxim,reverse-channel-microvolt = <170000>;
+ maxim,reverse-channel-microvolt = <170000>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- max9286_in0: endpoint {
- remote-endpoint = <&rdacm20_out0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- max9286_in1: endpoint {
- remote-endpoint = <&rdacm20_out1>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- max9286_in2: endpoint {
- remote-endpoint = <&rdacm20_out2>;
- };
- };
+ max9286_in0: endpoint {
+ remote-endpoint = <&rdacm20_out0>;
+ };
+ };
- port@3 {
- reg = <3>;
+ port@1 {
+ reg = <1>;
- max9286_in3: endpoint {
- remote-endpoint = <&rdacm20_out3>;
- };
- };
+ max9286_in1: endpoint {
+ remote-endpoint = <&rdacm20_out1>;
+ };
+ };
- port@4 {
- reg = <4>;
+ port@2 {
+ reg = <2>;
- max9286_out: endpoint {
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
- };
- };
- };
+ max9286_in2: endpoint {
+ remote-endpoint = <&rdacm20_out2>;
+ };
+ };
- i2c-mux {
- #address-cells = <1>;
- #size-cells = <0>;
+ port@3 {
+ reg = <3>;
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
+ max9286_in3: endpoint {
+ remote-endpoint = <&rdacm20_out3>;
+ };
+ };
- camera@51 {
- compatible = "imi,rdacm20";
- reg = <0x51>, <0x61>;
+ port@4 {
+ reg = <4>;
- port {
- rdacm20_out0: endpoint {
- remote-endpoint = <&max9286_in0>;
+ max9286_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
};
- };
-
};
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- camera@52 {
- compatible = "imi,rdacm20";
- reg = <0x52>, <0x62>;
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port {
- rdacm20_out1: endpoint {
- remote-endpoint = <&max9286_in1>;
- };
- };
- };
- };
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
+ camera@51 {
+ compatible = "imi,rdacm20";
+ reg = <0x51>, <0x61>;
- camera@53 {
- compatible = "imi,rdacm20";
- reg = <0x53>, <0x63>;
+ port {
+ rdacm20_out0: endpoint {
+ remote-endpoint = <&max9286_in0>;
+ };
+ };
- port {
- rdacm20_out2: endpoint {
- remote-endpoint = <&max9286_in2>;
+ };
};
- };
- };
- };
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ camera@52 {
+ compatible = "imi,rdacm20";
+ reg = <0x52>, <0x62>;
+
+ port {
+ rdacm20_out1: endpoint {
+ remote-endpoint = <&max9286_in1>;
+ };
+ };
+ };
+ };
- camera@54 {
- compatible = "imi,rdacm20";
- reg = <0x54>, <0x64>;
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ camera@53 {
+ compatible = "imi,rdacm20";
+ reg = <0x53>, <0x63>;
+
+ port {
+ rdacm20_out2: endpoint {
+ remote-endpoint = <&max9286_in2>;
+ };
+ };
+ };
+ };
- port {
- rdacm20_out3: endpoint {
- remote-endpoint = <&max9286_in3>;
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ camera@54 {
+ compatible = "imi,rdacm20";
+ reg = <0x54>, <0x64>;
+
+ port {
+ rdacm20_out3: endpoint {
+ remote-endpoint = <&max9286_in3>;
+ };
+ };
+ };
};
- };
};
- };
};
- };
};
--
2.32.0
next prev parent reply other threads:[~2021-07-22 9:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-22 9:12 [PATCH v6 0/8] arm64: dts: renesas: Enable GMSL on Eagle and Condor Jacopo Mondi
2021-07-22 9:12 ` Jacopo Mondi [this message]
2021-07-22 9:12 ` [PATCH v6 2/8] dt-bindings: media: max9286: Define 'maxim,gpio-poc' Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 3/8] media: i2c: max9286: Use "maxim,gpio-poc" property Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 4/8] media: i2c: rdacm20: Re-program chip address earlier Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 5/8] arm64: dts: renesas: condor: Enable MAX9286 Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 6/8] arm64: dts: renesas: eagle: " Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 7/8] arm64: dts: renesas: Add GMSL cameras .dtsi Jacopo Mondi
2021-07-22 9:12 ` [PATCH v6 8/8] DNI: arm64: dts: renesas: eagle: Include eagle-gmsl Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210722091239.26451-2-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.