Added support of iouring iopoll interface in driver. Driver will work in non-IRQ mode i.e. There will not be any msix vector associated for poll_queues and h/w can still work in this mode. IOC h/w is single submission queue and multiple reply queue, but using shared host tagset support it will enable simulated multiple hw queue. Driver allocates user provided poll_queue count number of extra reply queues and they will be marked as io uring poll_queue. These poll_queues will not have associated msix vectors. All the IO completion on this queue will be done from IOPOLL interface. This feature can be enabled using module parameter poll_queues. Signed-off-by: Sreekanth Reddy --- drivers/scsi/mpt3sas/mpt3sas_base.c | 243 ++++++++++++++++++++++++--- drivers/scsi/mpt3sas/mpt3sas_base.h | 23 +++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 62 +++++-- 3 files changed, 296 insertions(+), 32 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index c399552..90dd18a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -116,6 +116,14 @@ MODULE_PARM_DESC(perf_mode, "\t\tdefault - default perf_mode is 'balanced'" ); +static int poll_queues; +module_param(poll_queues, int, 0444); +MODULE_PARM_DESC(poll_queues, "Number of queues to be use for io_uring poll mode.\n\t\t" + "This parameter is effective only if host_tagset_enable=1. &\n\t\t" + "when poll_queues are enabled then &\n\t\t" + "perf_mode is set to latency mode. &\n\t\t" + ); + enum mpt3sas_perf_mode { MPT_PERF_MODE_DEFAULT = -1, MPT_PERF_MODE_BALANCED = 0, @@ -709,6 +717,7 @@ _base_fault_reset_work(struct work_struct *work) * and this call is safe since dead ioc will never return any * command back from HW. */ + mpt3sas_base_pause_mq_polling(ioc); ioc->schedule_dead_ioc_flush_running_cmds(ioc); /* * Set remove_host flag early since kernel thread will @@ -744,6 +753,7 @@ _base_fault_reset_work(struct work_struct *work) spin_unlock_irqrestore( &ioc->ioc_reset_in_progress_lock, flags); mpt3sas_base_mask_interrupts(ioc); + mpt3sas_base_pause_mq_polling(ioc); _base_clear_outstanding_commands(ioc); } @@ -1547,6 +1557,53 @@ _base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid) return cb_idx; } +/** + * mpt3sas_base_pause_mq_polling - pause polling on the mq poll queues + * when driver is flushing out the IOs. + * @ioc: per adapter object + * + * Pause polling on the mq poll (io uring) queues when driver is flushing + * out the IOs. Otherwise we may see the race condition of completing the same + * IO from two paths. + * + * Returns nothing. + */ +void +mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc) +{ + int iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + int qid; + + for (qid = 0; qid < iopoll_q_count; qid++) + atomic_set(&ioc->io_uring_poll_queues[qid].pause, 1); + + /* + * wait for current poll to complete. + */ + for (qid = 0; qid < iopoll_q_count; qid++) { + while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) + udelay(500); + } +} + +/** + * mpt3sas_base_resume_mq_polling - Resume polling on mq poll queues. + * @ioc: per adapter object + * + * Returns nothing. + */ +void +mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc) +{ + int iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + int qid; + + for (qid = 0; qid < iopoll_q_count; qid++) + atomic_set(&ioc->io_uring_poll_queues[qid].pause, 0); +} + /** * mpt3sas_base_mask_interrupts - disable interrupts * @ioc: per adapter object @@ -1722,7 +1779,8 @@ _base_process_reply_queue(struct adapter_reply_queue *reply_q) MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex); } - if (!reply_q->irq_poll_scheduled) { + if (!reply_q->is_iouring_poll_q && + !reply_q->irq_poll_scheduled) { reply_q->irq_poll_scheduled = true; irq_poll_sched(&reply_q->irqpoll); } @@ -1778,6 +1836,33 @@ _base_process_reply_queue(struct adapter_reply_queue *reply_q) return completed_cmds; } +/** + * mpt3sas_blk_mq_poll - poll the blk mq poll queue + * @shost: Scsi_Host object + * @queue_num: hw ctx queue number + * + * Return number of entries that has been processed from poll queue. + */ +int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num) +{ + struct MPT3SAS_ADAPTER *ioc = + (struct MPT3SAS_ADAPTER *)shost->hostdata; + struct adapter_reply_queue *reply_q; + int num_entries = 0; + int qid = queue_num - ioc->iopoll_q_start_index; + + if (atomic_read(&ioc->io_uring_poll_queues[qid].pause) || + !atomic_add_unless(&ioc->io_uring_poll_queues[qid].busy, 1, 1)) + return 0; + + reply_q = ioc->io_uring_poll_queues[qid].reply_q; + + num_entries = _base_process_reply_queue(reply_q); + atomic_dec(&ioc->io_uring_poll_queues[qid].busy); + + return num_entries; +} + /** * _base_interrupt - MPT adapter (IOC) specific interrupt handler. * @irq: irq number (not used) @@ -1851,6 +1936,8 @@ _base_init_irqpolls(struct MPT3SAS_ADAPTER *ioc) return; list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { + if (reply_q->is_iouring_poll_q) + continue; irq_poll_init(&reply_q->irqpoll, ioc->hba_queue_depth/4, _base_irqpoll); reply_q->irq_poll_scheduled = false; @@ -1900,6 +1987,12 @@ mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll) /* TMs are on msix_index == 0 */ if (reply_q->msix_index == 0) continue; + + if (reply_q->is_iouring_poll_q) { + _base_process_reply_queue(reply_q); + continue; + } + synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index)); if (reply_q->irq_poll_scheduled) { /* Calling irq_poll_disable will wait for any pending @@ -2998,6 +3091,11 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { list_del(&reply_q->list); + if (reply_q->is_iouring_poll_q) { + kfree(reply_q); + continue; + } + if (ioc->smp_affinity_enable) irq_set_affinity_hint(pci_irq_vector(ioc->pdev, reply_q->msix_index), NULL); @@ -3019,7 +3117,7 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) { struct pci_dev *pdev = ioc->pdev; struct adapter_reply_queue *reply_q; - int r; + int r, qid; reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL); if (!reply_q) { @@ -3031,6 +3129,17 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) reply_q->msix_index = index; atomic_set(&reply_q->busy, 0); + + if (index >= ioc->iopoll_q_start_index) { + qid = index - ioc->iopoll_q_start_index; + snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-mq-poll%d", + ioc->driver_name, ioc->id, qid); + reply_q->is_iouring_poll_q = 1; + ioc->io_uring_poll_queues[qid].reply_q = reply_q; + goto out; + } + + if (ioc->msix_enable) snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", ioc->driver_name, ioc->id, index); @@ -3045,7 +3154,7 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) kfree(reply_q); return -EBUSY; } - +out: INIT_LIST_HEAD(&reply_q->list); list_add_tail(&reply_q->list, &ioc->reply_queue_list); return 0; @@ -3066,6 +3175,8 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) unsigned int cpu, nr_cpus, nr_msix, index = 0; struct adapter_reply_queue *reply_q; int local_numa_node; + int iopoll_q_count = ioc->reply_queue_count - + ioc->iopoll_q_start_index; if (!_base_is_controller_msix_enabled(ioc)) return; @@ -3099,7 +3210,8 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { const cpumask_t *mask; - if (reply_q->msix_index < ioc->high_iops_queues) + if (reply_q->msix_index < ioc->high_iops_queues || + reply_q->msix_index >= ioc->iopoll_q_start_index) continue; mask = pci_irq_get_affinity(ioc->pdev, @@ -3121,13 +3233,14 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) fall_back: cpu = cpumask_first(cpu_online_mask); - nr_msix -= ioc->high_iops_queues; + nr_msix -= (ioc->high_iops_queues - iopoll_q_count); index = 0; list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { unsigned int i, group = nr_cpus / nr_msix; - if (reply_q->msix_index < ioc->high_iops_queues) + if (reply_q->msix_index < ioc->high_iops_queues || + reply_q->msix_index >= ioc->iopoll_q_start_index) continue; if (cpu >= nr_cpus) @@ -3164,8 +3277,12 @@ _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, { u16 lnksta, speed; + /* + * Disable high iops queues if io uring poll queues are enabled. + */ if (perf_mode == MPT_PERF_MODE_IOPS || - perf_mode == MPT_PERF_MODE_LATENCY) { + perf_mode == MPT_PERF_MODE_LATENCY || + ioc->io_uring_poll_queues) { ioc->high_iops_queues = 0; return; } @@ -3202,6 +3319,7 @@ _base_disable_msix(struct MPT3SAS_ADAPTER *ioc) return; pci_free_irq_vectors(ioc->pdev); ioc->msix_enable = 0; + kfree(ioc->io_uring_poll_queues); } /** @@ -3215,18 +3333,24 @@ _base_alloc_irq_vectors(struct MPT3SAS_ADAPTER *ioc) int i, irq_flags = PCI_IRQ_MSIX; struct irq_affinity desc = { .pre_vectors = ioc->high_iops_queues }; struct irq_affinity *descp = &desc; + /* + * Don't allocate msix vectors for poll_queues. + * msix_vectors is always within a range of FW supported reply queue. + */ + int nr_msix_vectors = ioc->iopoll_q_start_index; + if (ioc->smp_affinity_enable) - irq_flags |= PCI_IRQ_AFFINITY; + irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES; else descp = NULL; - ioc_info(ioc, " %d %d\n", ioc->high_iops_queues, - ioc->reply_queue_count); + ioc_info(ioc, " %d %d %d\n", ioc->high_iops_queues, + ioc->reply_queue_count, nr_msix_vectors); i = pci_alloc_irq_vectors_affinity(ioc->pdev, ioc->high_iops_queues, - ioc->reply_queue_count, irq_flags, descp); + nr_msix_vectors, irq_flags, descp); return i; } @@ -3242,6 +3366,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) int r; int i, local_max_msix_vectors; u8 try_msix = 0; + int iopoll_q_count = 0; ioc->msix_load_balance = false; @@ -3257,22 +3382,16 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "MSI-X vectors supported: %d\n", ioc->msix_vector_count); pr_info("\t no of cores: %d, max_msix_vectors: %d\n", ioc->cpu_count, max_msix_vectors); - if (ioc->is_aero_ioc) - _base_check_and_enable_high_iops_queues(ioc, - ioc->msix_vector_count); + ioc->reply_queue_count = - min_t(int, ioc->cpu_count + ioc->high_iops_queues, - ioc->msix_vector_count); + min_t(int, ioc->cpu_count, ioc->msix_vector_count); if (!ioc->rdpq_array_enable && max_msix_vectors == -1) local_max_msix_vectors = (reset_devices) ? 1 : 8; else local_max_msix_vectors = max_msix_vectors; - if (local_max_msix_vectors > 0) - ioc->reply_queue_count = min_t(int, local_max_msix_vectors, - ioc->reply_queue_count); - else if (local_max_msix_vectors == 0) + if (local_max_msix_vectors == 0) goto try_ioapic; /* @@ -3293,14 +3412,77 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) if (ioc->msix_load_balance) ioc->smp_affinity_enable = 0; + if (!ioc->smp_affinity_enable || ioc->reply_queue_count <= 1) + ioc->shost->host_tagset = 0; + + /* + * Enable io uring poll queues only if host_tagset is enabled. + */ + if (ioc->shost->host_tagset) + iopoll_q_count = poll_queues; + + if (iopoll_q_count) { + ioc->io_uring_poll_queues = kcalloc(iopoll_q_count, + sizeof(struct io_uring_poll_queue), GFP_KERNEL); + if (!ioc->io_uring_poll_queues) + iopoll_q_count = 0; + } + + if (ioc->is_aero_ioc) + _base_check_and_enable_high_iops_queues(ioc, + ioc->msix_vector_count); + + /* + * Add high iops queues count to reply queue count if high iops queues + * are enabled. + */ + ioc->reply_queue_count = min_t(int, + ioc->reply_queue_count + ioc->high_iops_queues, + ioc->msix_vector_count); + + /* + * Adjust the reply queue count incase reply queue count + * exceeds the user provided MSIx vectors count. + */ + if (local_max_msix_vectors > 0) + ioc->reply_queue_count = min_t(int, local_max_msix_vectors, + ioc->reply_queue_count); + /* + * Add io uring poll queues count to reply queues count + * if io uring is enabled in driver. + */ + if (iopoll_q_count) { + if (ioc->reply_queue_count < (iopoll_q_count + MPT3_MIN_IRQS)) + iopoll_q_count = 0; + ioc->reply_queue_count = min_t(int, + ioc->reply_queue_count + iopoll_q_count, + ioc->msix_vector_count); + } + + /* + * Starting index of io uring poll queues in reply queue list. + */ + ioc->iopoll_q_start_index = + ioc->reply_queue_count - iopoll_q_count; + r = _base_alloc_irq_vectors(ioc); if (r < 0) { ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", r); goto try_ioapic; } + /* + * Adjust the reply queue count if the allocated + * MSIx vectors is less then the requested number + * of MSIx vectors. + */ + if (r < ioc->iopoll_q_start_index) { + ioc->reply_queue_count = r + iopoll_q_count; + ioc->iopoll_q_start_index = + ioc->reply_queue_count - iopoll_q_count; + } + ioc->msix_enable = 1; - ioc->reply_queue_count = r; for (i = 0; i < ioc->reply_queue_count; i++) { r = _base_request_irq(ioc, i); if (r) { @@ -3320,6 +3502,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) ioc->high_iops_queues = 0; ioc_info(ioc, "High IOPs queues : disabled\n"); ioc->reply_queue_count = 1; + ioc->iopoll_q_start_index = ioc->reply_queue_count - 0; r = pci_alloc_irq_vectors(ioc->pdev, 1, 1, PCI_IRQ_LEGACY); if (r < 0) { dfailprintk(ioc, @@ -3416,6 +3599,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) u64 pio_chip = 0; phys_addr_t chip_phys = 0; struct adapter_reply_queue *reply_q; + int iopoll_q_count = 0; dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); @@ -3489,6 +3673,12 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) if (r) goto out_fail; + iopoll_q_count = ioc->reply_queue_count - ioc->iopoll_q_start_index; + for (i = 0; i < iopoll_q_count; i++) { + atomic_set(&ioc->io_uring_poll_queues[i].busy, 0); + atomic_set(&ioc->io_uring_poll_queues[i].pause, 0); + } + if (!ioc->is_driver_loading) _base_init_irqpolls(ioc); /* Use the Combined reply queue feature only for SAS3 C0 & higher @@ -3530,11 +3720,18 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) * 4))); } - list_for_each_entry(reply_q, &ioc->reply_queue_list, list) + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + if (reply_q->msix_index >= ioc->iopoll_q_start_index) { + pr_info("%s: enabled: index: %d\n", + reply_q->name, reply_q->msix_index); + continue; + } + pr_info("%s: %s enabled: IRQ %d\n", reply_q->name, ioc->msix_enable ? "PCI-MSI-X" : "IO-APIC", pci_irq_vector(ioc->pdev, reply_q->msix_index)); + } ioc_info(ioc, "iomem(%pap), mapped(0x%p), size(%d)\n", &chip_phys, ioc->chip, memap_sz); @@ -8471,6 +8668,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, _base_pre_reset_handler(ioc); mpt3sas_wait_for_commands_to_complete(ioc); mpt3sas_base_mask_interrupts(ioc); + mpt3sas_base_pause_mq_polling(ioc); r = _base_make_ioc_ready(ioc, type); if (r) goto out; @@ -8512,6 +8710,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); ioc->ioc_reset_count++; mutex_unlock(&ioc->reset_in_progress_mutex); + mpt3sas_base_resume_mq_polling(ioc); out_unlocked: if ((r == 0) && is_trigger) { diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index d4834c8..ee74279 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -354,6 +354,7 @@ struct mpt3sas_nvme_cmd { #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3 12 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35 16 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10) +#define MPT3_MIN_IRQS 1 /* OEM Identifiers */ #define MFG10_OEM_ID_INVALID (0x00000000) @@ -936,6 +937,8 @@ struct _event_ack_list { * @os_irq: irq number * @irqpoll: irq_poll object * @irq_poll_scheduled: Tells whether irq poll is scheduled or not + * @is_iouring_poll_q: Tells whether reply queues is assigned + * to io uring poll queues or not * @list: this list */ struct adapter_reply_queue { @@ -949,9 +952,22 @@ struct adapter_reply_queue { struct irq_poll irqpoll; bool irq_poll_scheduled; bool irq_line_enable; + bool is_iouring_poll_q; struct list_head list; }; +/** + * struct io_uring_poll_queue - the io uring poll queue structure + * @busy: Tells whether io uring poll queue is busy or not + * @pause: Tells whether IOs are paused on io uring poll queue or not + * @reply_q: reply queue mapped for io uring poll queue + */ +struct io_uring_poll_queue { + atomic_t busy; + atomic_t pause; + struct adapter_reply_queue *reply_q; +}; + typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); /* SAS3.0 support */ @@ -1176,6 +1192,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands * @thresh_hold: Max number of reply descriptors processed * before updating Host Index + * @iopoll_q_start_index: starting index of io uring poll queues + * in reply queue list * @drv_internal_flags: Bit map internal to driver * @drv_support_bitmap: driver's supported feature bit map * @use_32bit_dma: Flag to use 32 bit consistent dma mask @@ -1372,11 +1390,13 @@ struct MPT3SAS_ADAPTER { bool msix_load_balance; u16 thresh_hold; u8 high_iops_queues; + u8 iopoll_q_start_index; u32 drv_internal_flags; u32 drv_support_bitmap; u32 dma_mask; bool enable_sdev_max_qd; bool use_32bit_dma; + struct io_uring_poll_queue *io_uring_poll_queues; /* internal commands, callback index */ u8 scsi_io_cb_idx; @@ -1730,6 +1750,9 @@ do { ioc_err(ioc, "In func: %s\n", __func__); \ status, mpi_request, sz); } while (0) int mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int wait_count); +int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num); +void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc); /* scsih shared API */ struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 866d118..f15c809 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11178,8 +11178,10 @@ static void scsih_remove(struct pci_dev *pdev) ioc->remove_host = 1; - if (!pci_device_is_present(pdev)) + if (!pci_device_is_present(pdev)) { + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); + } _scsih_fw_event_cleanup_queue(ioc); @@ -11274,8 +11276,10 @@ scsih_shutdown(struct pci_dev *pdev) ioc->remove_host = 1; - if (!pci_device_is_present(pdev)) + if (!pci_device_is_present(pdev)) { + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); + } _scsih_fw_event_cleanup_queue(ioc); @@ -11780,12 +11784,41 @@ static int scsih_map_queues(struct Scsi_Host *shost) { struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)shost->hostdata; + struct blk_mq_queue_map *map; + int i, qoff, offset; + int nr_msix_vectors = ioc->iopoll_q_start_index; + int iopoll_q_count = ioc->reply_queue_count - nr_msix_vectors; - if (ioc->shost->nr_hw_queues == 1) + if (shost->nr_hw_queues == 1) return 0; - return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT], - ioc->pdev, ioc->high_iops_queues); + for (i = 0, qoff = 0; i < shost->nr_maps; i++) { + map = &shost->tag_set.map[i]; + map->nr_queues = 0; + offset = 0; + if (i == HCTX_TYPE_DEFAULT) { + map->nr_queues = + nr_msix_vectors - ioc->high_iops_queues; + offset = ioc->high_iops_queues; + } else if (i == HCTX_TYPE_POLL) + map->nr_queues = iopoll_q_count; + + if (!map->nr_queues) + BUG_ON(i == HCTX_TYPE_DEFAULT); + + /* + * The poll queue(s) doesn't have an IRQ (and hence IRQ + * affinity), so use the regular blk-mq cpu mapping + */ + map->queue_offset = qoff; + if (i != HCTX_TYPE_POLL) + blk_mq_pci_map_queues(map, ioc->pdev, offset); + else + blk_mq_map_queues(map); + + qoff += map->nr_queues; + } + return 0; } /* shost template for SAS 2.0 HBA devices */ @@ -11856,6 +11889,7 @@ static struct scsi_host_template mpt3sas_driver_template = { .track_queue_depth = 1, .cmd_size = sizeof(struct scsiio_tracker), .map_queues = scsih_map_queues, + .mq_poll = mpt3sas_blk_mq_poll, }; /* raid transport support for SAS 3.0 HBA devices */ @@ -11952,6 +11986,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct Scsi_Host *shost = NULL; int rv; u16 hba_mpi_version; + int iopoll_q_count = 0; /* Determine in which MPI version class this pci device belongs */ hba_mpi_version = _scsih_determine_hba_mpi_version(pdev); @@ -12199,6 +12234,11 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_thread_fail; } + shost->host_tagset = 0; + + if (ioc->is_gen35_ioc && host_tagset_enable) + shost->host_tagset = 1; + ioc->is_driver_loading = 1; if ((mpt3sas_base_attach(ioc))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -12221,16 +12261,17 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) } else ioc->hide_drives = 0; - shost->host_tagset = 0; shost->nr_hw_queues = 1; - if (ioc->is_gen35_ioc && ioc->reply_queue_count > 1 && - host_tagset_enable && ioc->smp_affinity_enable) { - - shost->host_tagset = 1; + if (shost->host_tagset) { shost->nr_hw_queues = ioc->reply_queue_count - ioc->high_iops_queues; + iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + + shost->nr_maps = iopoll_q_count ? 3 : 1; + dev_info(&ioc->pdev->dev, "Max SCSIIO MPT commands: %d shared with nr_hw_queues = %d\n", shost->can_queue, shost->nr_hw_queues); @@ -12354,6 +12395,7 @@ scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) /* Permanent error, prepare for device removal */ ioc->pci_error_recovery = 1; mpt3sas_base_stop_watchdog(ioc); + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); return PCI_ERS_RESULT_DISCONNECT; } -- 2.27.0