All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Kepplinger <martin.kepplinger@puri.sm>
To: laurent.pinchart@ideasonboard.com,
	dafna.hirschfeld@collabora.com, shawnguo@kernel.org
Cc: devicetree@vger.kernel.org, festevam@gmail.com,
	kernel@pengutronix.de, kernel@puri.sm, krzk@kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	linux-staging@lists.linux.dev, m.felsch@pengutronix.de,
	mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org,
	slongerbeam@gmail.com,
	Martin Kepplinger <martin.kepplinger@puri.sm>
Subject: [PATCH v10 0/3] media: imx: add support for imx8mq MIPI RX
Date: Wed, 28 Jul 2021 11:12:42 +0200	[thread overview]
Message-ID: <20210728091245.231043-1-martin.kepplinger@puri.sm> (raw)

hi,

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
any feedback,

                           martin

revision history
----------------
v10: (thank you Dafna)
* improve send_level documentation.
* add some comments to 0x180 and 0x184
* after re-reading I could eliminate the unneeded setting of 0x184 (ignored
  by setting 0x180 to 1).

v9: (thank you Laurent)
* improve getting the esc clock rate for hs_settle
https://lore.kernel.org/linux-media/20210726082117.2423597-1-martin.kepplinger@puri.sm/

v8: (thank you Laurent)
* calculate hs_settle for any clk rate and mode
* add reviewed-by tag
https://lore.kernel.org/linux-media/20210723101217.1954805-1-martin.kepplinger@puri.sm/T/

v7: (thank you Laurent and Rob)
* fix the binding example (include the reset driver)
* use pm_runtime_resume_and_get()
* fix some logic in init_cfg()
* add some useful code comments and fix minor bits found by Laurent in v6
https://lore.kernel.org/linux-media/20210716102244.581182-1-martin.kepplinger@puri.sm/T/#t

v6: (thank you Laurent and Rob)
* add reviewed-by tag to binding
* statically allocate clk_bulk_data
* fix how the hs_settle value is applied
* remove s_power calls
* remove the link_setup() callback implementation and make the link immutable
* more cleanups according to Laurents' review from v5
https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/

v5: (thank you Laurent)
* fix reset usage by using the already supported reset controller driver
* remove clko2 (totally unrelated clock / had been included by accident)
* rename pxl clock to ui
https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/

v4: (thank you Rob and Marco)
* create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
* add imx8mq-specific compatibile to imx8mq.dtsi for future use
https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/

v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/

v1:
https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t


Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 +++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 991 ++++++++++++++++++
 4 files changed, 1270 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
2.30.2


WARNING: multiple messages have this Message-ID
From: Martin Kepplinger <martin.kepplinger@puri.sm>
To: laurent.pinchart@ideasonboard.com,
	dafna.hirschfeld@collabora.com, shawnguo@kernel.org
Cc: devicetree@vger.kernel.org, festevam@gmail.com,
	kernel@pengutronix.de, kernel@puri.sm, krzk@kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	linux-staging@lists.linux.dev, m.felsch@pengutronix.de,
	mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org,
	slongerbeam@gmail.com,
	Martin Kepplinger <martin.kepplinger@puri.sm>
Subject: [PATCH v10 0/3] media: imx: add support for imx8mq MIPI RX
Date: Wed, 28 Jul 2021 11:12:42 +0200	[thread overview]
Message-ID: <20210728091245.231043-1-martin.kepplinger@puri.sm> (raw)

hi,

This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.

It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
any feedback,

                           martin

revision history
----------------
v10: (thank you Dafna)
* improve send_level documentation.
* add some comments to 0x180 and 0x184
* after re-reading I could eliminate the unneeded setting of 0x184 (ignored
  by setting 0x180 to 1).

v9: (thank you Laurent)
* improve getting the esc clock rate for hs_settle
https://lore.kernel.org/linux-media/20210726082117.2423597-1-martin.kepplinger@puri.sm/

v8: (thank you Laurent)
* calculate hs_settle for any clk rate and mode
* add reviewed-by tag
https://lore.kernel.org/linux-media/20210723101217.1954805-1-martin.kepplinger@puri.sm/T/

v7: (thank you Laurent and Rob)
* fix the binding example (include the reset driver)
* use pm_runtime_resume_and_get()
* fix some logic in init_cfg()
* add some useful code comments and fix minor bits found by Laurent in v6
https://lore.kernel.org/linux-media/20210716102244.581182-1-martin.kepplinger@puri.sm/T/#t

v6: (thank you Laurent and Rob)
* add reviewed-by tag to binding
* statically allocate clk_bulk_data
* fix how the hs_settle value is applied
* remove s_power calls
* remove the link_setup() callback implementation and make the link immutable
* more cleanups according to Laurents' review from v5
https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/

v5: (thank you Laurent)
* fix reset usage by using the already supported reset controller driver
* remove clko2 (totally unrelated clock / had been included by accident)
* rename pxl clock to ui
https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/

v4: (thank you Rob and Marco)
* create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
* add imx8mq-specific compatibile to imx8mq.dtsi for future use
https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/

v3: (thank you, Rob and Laurent)
among minor other things according to v2 review, changes include:
* better describe the clocks
* rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t

v2: (thank you, Dan and Guido)
among fixes according to v1 reviews, changes include:
* remove status property from dt-bindings example
* define a few bits in order to have less magic values
* use "imx8mq_mipi_csi_" as local function prefix
* read DT properties only during probe()
* remove dead code (log_status)
* add imx8mq_mipi_csi_release_icc()
* fix imx8mq_mipi_csi_init_icc()
https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/

v1:
https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t


Martin Kepplinger (3):
  dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
    controller
  media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
  arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions

 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 +++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
 drivers/staging/media/imx/Makefile            |   1 +
 drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 991 ++++++++++++++++++
 4 files changed, 1270 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
 create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-07-28  9:13 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28  9:12 Martin Kepplinger [this message]
2021-07-28  9:12 ` Martin Kepplinger
2021-07-28  9:12 ` [PATCH v10 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger
2021-07-28  9:12   ` [PATCH v10 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 " Martin Kepplinger
2021-07-28  9:12 ` [PATCH v10 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger
2021-07-28  9:12   ` Martin Kepplinger
2021-07-28  9:12 ` [PATCH v10 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger
2021-07-28  9:12   ` Martin Kepplinger
2021-07-28 13:32 ` [PATCH v10 0/3] media: imx: add support for imx8mq MIPI RX Laurent Pinchart
2021-07-28 13:32   ` Laurent Pinchart
2021-08-04  9:31   ` Shawn Guo
2021-08-04  9:31     ` Shawn Guo
2021-08-04  9:56     ` Martin Kepplinger
2021-08-04  9:56       ` Martin Kepplinger
2021-08-04  9:56       ` Martin Kepplinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728091245.231043-1-martin.kepplinger@puri.sm \
    --to=martin.kepplinger@puri.sm \
    --cc=dafna.hirschfeld@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=krzk@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=m.felsch@pengutronix.de \
    --cc=mchehab@kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=slongerbeam@gmail.com \
    --subject='Re: [PATCH v10 0/3] media: imx: add support for imx8mq MIPI RX' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.