All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 7/8] arm64: dts: rockchip: enable gmac node on quartz64-a
Date: Wed, 28 Jul 2021 14:00:33 -0400	[thread overview]
Message-ID: <20210728180034.717953-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728180034.717953-1-pgwipeout@gmail.com>

Enable the gmac controller on the Pine64 Quartz64 Model A.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a3cdb6c2bec6..b239f314b38a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -11,6 +11,7 @@ / {
 	compatible = "pine64,quartz64-a", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 	};
@@ -19,6 +20,13 @@ chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -116,6 +124,29 @@ &cpu3 {
 	cpu-supply = <&vdd_cpu>;
 };
 
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_3v3>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -336,6 +367,13 @@ regulator-state-mem {
 	};
 };
 
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 7/8] arm64: dts: rockchip: enable gmac node on quartz64-a
Date: Wed, 28 Jul 2021 14:00:33 -0400	[thread overview]
Message-ID: <20210728180034.717953-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728180034.717953-1-pgwipeout@gmail.com>

Enable the gmac controller on the Pine64 Quartz64 Model A.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a3cdb6c2bec6..b239f314b38a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -11,6 +11,7 @@ / {
 	compatible = "pine64,quartz64-a", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 	};
@@ -19,6 +20,13 @@ chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -116,6 +124,29 @@ &cpu3 {
 	cpu-supply = <&vdd_cpu>;
 };
 
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_3v3>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -336,6 +367,13 @@ regulator-state-mem {
 	};
 };
 
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 7/8] arm64: dts: rockchip: enable gmac node on quartz64-a
Date: Wed, 28 Jul 2021 14:00:33 -0400	[thread overview]
Message-ID: <20210728180034.717953-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728180034.717953-1-pgwipeout@gmail.com>

Enable the gmac controller on the Pine64 Quartz64 Model A.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a3cdb6c2bec6..b239f314b38a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -11,6 +11,7 @@ / {
 	compatible = "pine64,quartz64-a", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 	};
@@ -19,6 +20,13 @@ chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -116,6 +124,29 @@ &cpu3 {
 	cpu-supply = <&vdd_cpu>;
 };
 
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_3v3>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -336,6 +367,13 @@ regulator-state-mem {
 	};
 };
 
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-07-28 18:01 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 18:00 [PATCH v2 0/8] fixes and enablement for rk356x Peter Geis
2021-07-28 18:00 ` Peter Geis
2021-07-28 18:00 ` Peter Geis
2021-07-28 18:00 ` [PATCH v2 1/8] arm64: dts: rockchip: fix rk3568 mbi-alias Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00 ` [PATCH v2 2/8] clk: rockchip: fix clk-pll rk356x early pll init Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00 ` [PATCH v2 3/8] arm64: dts: rockchip: add rk356x gpio debounce clocks Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00 ` [PATCH v2 4/8] arm64: dts: rockchip: add rk356x gmac1 node Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00 ` [PATCH v2 5/8] arm64: dts: rockchip: add rk3568 tsadc nodes Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 21:17   ` Heiko Stübner
2021-07-28 21:17     ` Heiko Stübner
2021-07-28 21:17     ` Heiko Stübner
2021-07-28 18:00 ` [PATCH v2 6/8] arm64: dts: rockchip: adjust rk3568 pll clocks Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00 ` Peter Geis [this message]
2021-07-28 18:00   ` [PATCH v2 7/8] arm64: dts: rockchip: enable gmac node on quartz64-a Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00 ` [PATCH v2 8/8] arm64: dts: rockchip: add thermal support to Quartz64 Model A Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-28 18:00   ` Peter Geis
2021-07-29 13:19 ` (subset) [PATCH v2 0/8] fixes and enablement for rk356x Heiko Stuebner
2021-07-29 13:19   ` Heiko Stuebner
2021-07-29 13:19   ` Heiko Stuebner
2021-08-18 21:25 ` Heiko Stuebner
2021-08-18 21:25   ` Heiko Stuebner
2021-08-18 21:25   ` Heiko Stuebner
2021-08-18 21:42 ` Heiko Stuebner
2021-08-18 21:42   ` Heiko Stuebner
2021-08-18 21:42   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728180034.717953-8-pgwipeout@gmail.com \
    --to=pgwipeout@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.