From: Simon Glass <sjg@chromium.org>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Tom Rini <trini@konsulko.com>, Simon Glass <sjg@chromium.org>
Subject: [PATCH v4 12/12] sandbox: Add a build for VPL
Date: Sun, 1 Aug 2021 13:21:15 -0600 [thread overview]
Message-ID: <20210801132108.v4.12.If1e267f286be9b2be553157103cd0146503ea50e@changeid> (raw)
In-Reply-To: <20210801192115.2183311-1-sjg@chromium.org>
Add an initial VPL build for sandbox. This includes the flow:
TPL (with of-platdata) -> VPL -> SPL -> U-Boot
To run it:
./tpl/u-boot-tpl -D
The -D is needed to get the default device tree, which includes the serial
console info.
Add a Makefile check for OF_HOSTFILE which is the option that enables
devicetree control on sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
Changes in v4:
- Add a sandbox_vpl build
- Update cover letter
Makefile | 2 +-
arch/sandbox/Kconfig | 8 ++
arch/sandbox/cpu/spl.c | 12 +-
arch/sandbox/dts/sandbox.dtsi | 10 +-
board/sandbox/MAINTAINERS | 7 +
configs/sandbox_vpl_defconfig | 249 ++++++++++++++++++++++++++++++++++
lib/Kconfig | 2 +-
7 files changed, 281 insertions(+), 9 deletions(-)
create mode 100644 configs/sandbox_vpl_defconfig
diff --git a/Makefile b/Makefile
index c1e5c7fc5a7..43924c86e3d 100644
--- a/Makefile
+++ b/Makefile
@@ -1190,7 +1190,7 @@ u-boot.bin: u-boot-fit-dtb.bin FORCE
u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
$(call if_changed,cat)
-else ifeq ($(CONFIG_OF_SEPARATE),y)
+else ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_OF_HOSTFILE),y)
u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
$(call if_changed,cat)
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index f83282d9d56..e504b08b951 100644
--- a/arch/sandbox/Kconfig
+++ b/arch/sandbox/Kconfig
@@ -29,6 +29,14 @@ config SANDBOX_SPL
bool "Enable SPL for sandbox"
select SUPPORT_SPL
+config SANDBOX_TPL
+ bool "Enable TPL for sandbox"
+ select SUPPORT_TPL
+
+config SANDBOX_VPL
+ bool "Enable VPL for sandbox"
+ select SUPPORT_VPL
+
config SYS_CONFIG_NAME
default "sandbox_spl" if SANDBOX_SPL
default "sandbox" if !SANDBOX_SPL
diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c
index 650bdb0a701..2f1c06903c8 100644
--- a/arch/sandbox/cpu/spl.c
+++ b/arch/sandbox/cpu/spl.c
@@ -31,13 +31,21 @@ int sandbox_find_next_phase(char *fname, int maxlen, bool use_img)
return 0;
}
-/* SPL / TPL init function */
+/* SPL / TPL / VPL init function */
void board_init_f(ulong flag)
{
struct sandbox_state *state = state_get_current();
+ int ret;
gd->arch.ram_buf = state->ram_buf;
gd->ram_size = state->ram_size;
+
+ ret = spl_early_init();
+ if (ret) {
+ debug("spl_early_init() failed: %d\n", ret);
+ hang();
+ }
+ preloader_console_init();
}
u32 spl_boot_device(void)
@@ -74,8 +82,6 @@ void spl_board_init(void)
{
struct sandbox_state *state = state_get_current();
- preloader_console_init();
-
if (state->run_unittests) {
struct unit_test *tests = UNIT_TEST_ALL_START();
const int count = UNIT_TEST_ALL_COUNT();
diff --git a/arch/sandbox/dts/sandbox.dtsi b/arch/sandbox/dts/sandbox.dtsi
index 200fcab6a41..b49fdc6d8ab 100644
--- a/arch/sandbox/dts/sandbox.dtsi
+++ b/arch/sandbox/dts/sandbox.dtsi
@@ -226,7 +226,7 @@
};
spl-test {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
compatible = "sandbox,spl-test";
boolval;
intval = <1>;
@@ -240,7 +240,7 @@
};
spl-test2 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
compatible = "sandbox,spl-test";
intval = <3>;
intarray = <5>;
@@ -252,14 +252,14 @@
};
spl-test3 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
compatible = "sandbox,spl-test";
stringarray = "one";
maybe-empty-int = <1>;
};
spl-test5 {
- u-boot,dm-tpl;
+ u-boot,dm-vpl;
compatible = "sandbox,spl-test";
stringarray = "tpl";
};
@@ -306,6 +306,8 @@
/* Needs to be available prior to relocation */
uart0: serial {
u-boot,dm-spl;
+ u-boot,dm-tpl;
+ u-boot,dm-vpl;
compatible = "sandbox,serial";
sandbox,text-colour = "cyan";
pinctrl-names = "default";
diff --git a/board/sandbox/MAINTAINERS b/board/sandbox/MAINTAINERS
index d32561cd1d0..9f5073bf287 100644
--- a/board/sandbox/MAINTAINERS
+++ b/board/sandbox/MAINTAINERS
@@ -33,3 +33,10 @@ S: Maintained
F: board/sandbox/
F: include/configs/sandbox.h
F: configs/sandbox_flattree_defconfig
+
+SANDBOX VPL BOARD
+M: Simon Glass <sjg@chromium.org>
+S: Maintained
+F: board/sandbox/
+F: include/configs/sandbox_spl.h
+F: configs/sandbox_vpl_defconfig
diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig
new file mode 100644
index 00000000000..bc5978e753f
--- /dev/null
+++ b/configs/sandbox_vpl_defconfig
@@ -0,0 +1,249 @@
+CONFIG_SYS_TEXT_BASE=0x200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_MEMTEST_START=0x00100000
+CONFIG_SYS_MEMTEST_END=0x00101000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_TPL_LIBCOMMON_SUPPORT=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL=y
+CONFIG_BOOTSTAGE_STASH_ADDR=0x0
+CONFIG_SANDBOX_SPL=y
+CONFIG_SANDBOX_TPL=y
+CONFIG_SANDBOX_VPL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_BOOTSTAGE=y
+CONFIG_BOOTSTAGE_REPORT=y
+CONFIG_BOOTSTAGE_FDT=y
+CONFIG_BOOTSTAGE_STASH=y
+CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
+CONFIG_CONSOLE_RECORD=y
+CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_MISC_INIT_F=y
+CONFIG_HANDOFF=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_RTC_SUPPORT=y
+CONFIG_TPL=y
+CONFIG_TPL_DRIVERS_MISC=y
+CONFIG_TPL_ENV_SUPPORT=y
+CONFIG_TPL_I2C=y
+CONFIG_TPL_RTC_SUPPORT=y
+CONFIG_TPL_SERIAL_SUPPORT=y
+CONFIG_VPL=y
+CONFIG_VPL_ENV_SUPPORT=y
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_BOOTEFI_HELLO=y
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_ENV_CALLBACK=y
+CONFIG_CMD_ENV_FLAGS=y
+CONFIG_CMD_NVEDIT_INFO=y
+CONFIG_CMD_NVEDIT_LOAD=y
+CONFIG_CMD_NVEDIT_SELECT=y
+CONFIG_LOOPW=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DEMO=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_IDE=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_OSD=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_BOOTP_DNS2=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SOUND=y
+CONFIG_CMD_BOOTSTAGE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_TPM=y
+CONFIG_CMD_TPM_TEST=y
+CONFIG_CMD_CBFS=y
+CONFIG_CMD_CRAMFS=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_MAC_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_TPL_OF_CONTROL=y
+CONFIG_OF_HOSTFILE=y
+CONFIG_TPL_OF_PLATDATA=y
+CONFIG_TPL_OF_PLATDATA_INST=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_EXT4=y
+CONFIG_ENV_EXT4_INTERFACE="host"
+CONFIG_ENV_EXT4_DEVICE_AND_PART="0:0"
+CONFIG_BOOTP_SEND_HOSTNAME=y
+CONFIG_NETCONSOLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_SPL_DM=y
+CONFIG_TPL_DM=y
+CONFIG_DM_DMA=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_DEVRES=y
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_ADC=y
+CONFIG_ADC_SANDBOX=y
+CONFIG_AXI=y
+CONFIG_AXI_SANDBOX=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_TPL_CLK=y
+CONFIG_CPU=y
+CONFIG_DM_DEMO=y
+CONFIG_DM_DEMO_SIMPLE=y
+CONFIG_DM_DEMO_SHAPE=y
+CONFIG_SPL_FIRMWARE=y
+CONFIG_GPIO_HOG=y
+CONFIG_PM8916_GPIO=y
+CONFIG_SANDBOX_GPIO=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_I2C_CROS_EC_LDO=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_SANDBOX=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_CROS_EC_KEYB=y
+CONFIG_I8042_KEYB=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_SANDBOX_MBOX=y
+CONFIG_MISC=y
+CONFIG_TPL_MISC=y
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_I2C=y
+CONFIG_CROS_EC_LPC=y
+CONFIG_CROS_EC_SANDBOX=y
+CONFIG_CROS_EC_SPI=y
+CONFIG_P2SB=y
+CONFIG_PWRSEQ=y
+CONFIG_SPL_PWRSEQ=y
+CONFIG_MMC_SANDBOX=y
+CONFIG_SPI_FLASH_SANDBOX=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_NVME=y
+CONFIG_PCI=y
+CONFIG_PCI_SANDBOX=y
+CONFIG_PHY=y
+CONFIG_PHY_SANDBOX=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_SANDBOX=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_ACT8846=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_PMIC_MAX77686=y
+CONFIG_DM_PMIC_MC34708=y
+CONFIG_PMIC_PM8916=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_PMIC_S2MPS11=y
+CONFIG_DM_PMIC_SANDBOX=y
+CONFIG_PMIC_S5M8767=y
+CONFIG_PMIC_TPS65090=y
+CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_ACT8846=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_MAX77686=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_REGULATOR_S5M8767=y
+CONFIG_DM_REGULATOR_SANDBOX=y
+CONFIG_REGULATOR_TPS65090=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_CROS_EC=y
+CONFIG_PWM_SANDBOX=y
+CONFIG_RAM=y
+CONFIG_REMOTEPROC_SANDBOX=y
+CONFIG_DM_RESET=y
+CONFIG_SANDBOX_RESET=y
+CONFIG_DM_RTC=y
+CONFIG_SPL_DM_RTC=y
+CONFIG_TPL_DM_RTC=y
+CONFIG_SANDBOX_SERIAL=y
+CONFIG_SOUND=y
+CONFIG_SOUND_SANDBOX=y
+CONFIG_SOC_DEVICE=y
+CONFIG_SANDBOX_SPI=y
+CONFIG_SPMI=y
+CONFIG_SPMI_SANDBOX=y
+CONFIG_SYSINFO=y
+CONFIG_SYSINFO_SANDBOX=y
+CONFIG_SYSINFO_GPIO=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_TPL_SYSRESET=y
+CONFIG_TIMER=y
+CONFIG_TIMER_EARLY=y
+CONFIG_SANDBOX_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_EMUL=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_DM_VIDEO=y
+CONFIG_CONSOLE_ROTATION=y
+CONFIG_CONSOLE_TRUETYPE=y
+CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
+CONFIG_VIDEO_SANDBOX_SDL=y
+CONFIG_OSD=y
+CONFIG_SANDBOX_OSD=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_VIDEO_BMP_RLE8=y
+CONFIG_FS_CBFS=y
+CONFIG_FS_CRAMFS=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_RSA_VERIFY_WITH_PKEY=y
+CONFIG_TPM=y
+CONFIG_LZ4=y
+CONFIG_ERRNO_STR=y
+CONFIG_UNIT_TEST=y
+CONFIG_SPL_UNIT_TEST=y
+CONFIG_UT_TIME=y
+CONFIG_UT_DM=y
diff --git a/lib/Kconfig b/lib/Kconfig
index 8cf7acf89f4..496daa3be65 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -25,7 +25,7 @@ config BCH
config BINMAN_FDT
bool "Allow access to binman information in the device tree"
depends on BINMAN && DM && OF_CONTROL
- default y if OF_SEPARATE || OF_EMBED
+ default y if OF_SEPARATE || OF_EMBED || OF_HOSTFILE
help
This enables U-Boot to access information about binman entries,
stored in the device tree in a binman node. Typical uses are to
--
2.32.0.554.ge1b32706d8-goog
prev parent reply other threads:[~2021-08-01 19:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-01 19:21 [PATCH v4 00/12] vpl: Introduce a verifying program loader Simon Glass
2021-08-01 19:21 ` [PATCH v4 01/12] doc: Convert SPL documentation to ReST Simon Glass
2021-08-01 19:21 ` [PATCH v4 02/12] doc: Expand SPL docs to explain the phase and config Simon Glass
2021-08-01 19:21 ` [PATCH v4 03/12] test: Tidy up test building with SPL Simon Glass
2021-08-01 19:21 ` [PATCH v4 04/12] spl: Move TPL_HASH_SUPPORT down next to other TPL options Simon Glass
2021-08-01 19:21 ` [PATCH v4 05/12] bloblist: Correct Kconfig dependencies Simon Glass
2021-08-01 19:21 ` [PATCH v4 06/12] avb: Don't build in SPL Simon Glass
2021-08-01 19:21 ` [PATCH v4 07/12] Makefile: Simplify devicetree rules for SPL/TPL Simon Glass
2021-08-01 19:21 ` [PATCH v4 08/12] Makefile: Tidy up the TPL build rules Simon Glass
2021-08-01 19:21 ` [PATCH v4 09/12] binman: Add VPL support Simon Glass
2021-08-01 19:21 ` [PATCH v4 10/12] Introduce Verifying Program Loader (VPL) Simon Glass
2021-08-01 19:21 ` [PATCH v4 11/12] vpl: Add Kconfig options for VPL Simon Glass
2021-08-01 19:21 ` Simon Glass [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210801132108.v4.12.If1e267f286be9b2be553157103cd0146503ea50e@changeid \
--to=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.