All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	Wen Gong <wgong@codeaurora.org>,
	Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 2/3] ath11k: enable 6G channels for WCN6855
Date: Wed,  4 Aug 2021 21:12:16 +0300	[thread overview]
Message-ID: <20210804181217.88751-3-jouni@codeaurora.org> (raw)
In-Reply-To: <20210804181217.88751-1-jouni@codeaurora.org>

From: Wen Gong <wgong@codeaurora.org>

For some chips such as WCN6855, single_pdev_only is set in struct
ath11k_hw_params which means ath11k calls ieee80211_register_hw() only
once and create only one device interface, and that device interface
supports all 2G/5G/6G channels.

ath11k_mac_setup_channels_rates() sets up the channels and it is called
for each device interface. It is called only once for single_pdev_only,
and then set up all channels for 2G/5G/6G. The logic of
ath11k_mac_setup_channels_rates() is not suitable for single_pdev_only,
it leads to all 6G channels being disabled for the device interface
which is single_pdev_only such as WCN6855.

Add channel frequency checks for the 6G band and enable the 6G channels
properly based on what is supported by the chip.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index c83a968fc7ba..04a8f82e3a17 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -7213,7 +7213,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 					   u32 supported_bands)
 {
 	struct ieee80211_supported_band *band;
-	struct ath11k_hal_reg_capabilities_ext *reg_cap;
+	struct ath11k_hal_reg_capabilities_ext *reg_cap, *temp_reg_cap;
 	void *channels;
 	u32 phy_id;
 
@@ -7223,6 +7223,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 		     ATH11K_NUM_CHANS);
 
 	reg_cap = &ar->ab->hal_reg_cap[ar->pdev_idx];
+	temp_reg_cap = reg_cap;
 
 	if (supported_bands & WMI_HOST_WLAN_2G_CAP) {
 		channels = kmemdup(ath11k_2ghz_channels,
@@ -7241,11 +7242,11 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 
 		if (ar->ab->hw_params.single_pdev_only) {
 			phy_id = ath11k_get_phy_id(ar, WMI_HOST_WLAN_2G_CAP);
-			reg_cap = &ar->ab->hal_reg_cap[phy_id];
+			temp_reg_cap = &ar->ab->hal_reg_cap[phy_id];
 		}
 		ath11k_mac_update_ch_list(ar, band,
-					  reg_cap->low_2ghz_chan,
-					  reg_cap->high_2ghz_chan);
+					  temp_reg_cap->low_2ghz_chan,
+					  temp_reg_cap->high_2ghz_chan);
 	}
 
 	if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
@@ -7265,9 +7266,15 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 			band->n_bitrates = ath11k_a_rates_size;
 			band->bitrates = ath11k_a_rates;
 			ar->hw->wiphy->bands[NL80211_BAND_6GHZ] = band;
+
+			if (ar->ab->hw_params.single_pdev_only) {
+				phy_id = ath11k_get_phy_id(ar, WMI_HOST_WLAN_5G_CAP);
+				temp_reg_cap = &ar->ab->hal_reg_cap[phy_id];
+			}
+
 			ath11k_mac_update_ch_list(ar, band,
-						  reg_cap->low_5ghz_chan,
-						  reg_cap->high_5ghz_chan);
+						  temp_reg_cap->low_5ghz_chan,
+						  temp_reg_cap->high_5ghz_chan);
 		}
 
 		if (reg_cap->low_5ghz_chan < ATH11K_MIN_6G_FREQ) {
@@ -7290,12 +7297,12 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 
 			if (ar->ab->hw_params.single_pdev_only) {
 				phy_id = ath11k_get_phy_id(ar, WMI_HOST_WLAN_5G_CAP);
-				reg_cap = &ar->ab->hal_reg_cap[phy_id];
+				temp_reg_cap = &ar->ab->hal_reg_cap[phy_id];
 			}
 
 			ath11k_mac_update_ch_list(ar, band,
-						  reg_cap->low_5ghz_chan,
-						  reg_cap->high_5ghz_chan);
+						  temp_reg_cap->low_5ghz_chan,
+						  temp_reg_cap->high_5ghz_chan);
 		}
 	}
 
-- 
2.25.1


WARNING: multiple messages have this Message-ID
From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	Wen Gong <wgong@codeaurora.org>,
	Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 2/3] ath11k: enable 6G channels for WCN6855
Date: Wed,  4 Aug 2021 21:12:16 +0300	[thread overview]
Message-ID: <20210804181217.88751-3-jouni@codeaurora.org> (raw)
In-Reply-To: <20210804181217.88751-1-jouni@codeaurora.org>

From: Wen Gong <wgong@codeaurora.org>

For some chips such as WCN6855, single_pdev_only is set in struct
ath11k_hw_params which means ath11k calls ieee80211_register_hw() only
once and create only one device interface, and that device interface
supports all 2G/5G/6G channels.

ath11k_mac_setup_channels_rates() sets up the channels and it is called
for each device interface. It is called only once for single_pdev_only,
and then set up all channels for 2G/5G/6G. The logic of
ath11k_mac_setup_channels_rates() is not suitable for single_pdev_only,
it leads to all 6G channels being disabled for the device interface
which is single_pdev_only such as WCN6855.

Add channel frequency checks for the 6G band and enable the 6G channels
properly based on what is supported by the chip.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index c83a968fc7ba..04a8f82e3a17 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -7213,7 +7213,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 					   u32 supported_bands)
 {
 	struct ieee80211_supported_band *band;
-	struct ath11k_hal_reg_capabilities_ext *reg_cap;
+	struct ath11k_hal_reg_capabilities_ext *reg_cap, *temp_reg_cap;
 	void *channels;
 	u32 phy_id;
 
@@ -7223,6 +7223,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 		     ATH11K_NUM_CHANS);
 
 	reg_cap = &ar->ab->hal_reg_cap[ar->pdev_idx];
+	temp_reg_cap = reg_cap;
 
 	if (supported_bands & WMI_HOST_WLAN_2G_CAP) {
 		channels = kmemdup(ath11k_2ghz_channels,
@@ -7241,11 +7242,11 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 
 		if (ar->ab->hw_params.single_pdev_only) {
 			phy_id = ath11k_get_phy_id(ar, WMI_HOST_WLAN_2G_CAP);
-			reg_cap = &ar->ab->hal_reg_cap[phy_id];
+			temp_reg_cap = &ar->ab->hal_reg_cap[phy_id];
 		}
 		ath11k_mac_update_ch_list(ar, band,
-					  reg_cap->low_2ghz_chan,
-					  reg_cap->high_2ghz_chan);
+					  temp_reg_cap->low_2ghz_chan,
+					  temp_reg_cap->high_2ghz_chan);
 	}
 
 	if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
@@ -7265,9 +7266,15 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 			band->n_bitrates = ath11k_a_rates_size;
 			band->bitrates = ath11k_a_rates;
 			ar->hw->wiphy->bands[NL80211_BAND_6GHZ] = band;
+
+			if (ar->ab->hw_params.single_pdev_only) {
+				phy_id = ath11k_get_phy_id(ar, WMI_HOST_WLAN_5G_CAP);
+				temp_reg_cap = &ar->ab->hal_reg_cap[phy_id];
+			}
+
 			ath11k_mac_update_ch_list(ar, band,
-						  reg_cap->low_5ghz_chan,
-						  reg_cap->high_5ghz_chan);
+						  temp_reg_cap->low_5ghz_chan,
+						  temp_reg_cap->high_5ghz_chan);
 		}
 
 		if (reg_cap->low_5ghz_chan < ATH11K_MIN_6G_FREQ) {
@@ -7290,12 +7297,12 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 
 			if (ar->ab->hw_params.single_pdev_only) {
 				phy_id = ath11k_get_phy_id(ar, WMI_HOST_WLAN_5G_CAP);
-				reg_cap = &ar->ab->hal_reg_cap[phy_id];
+				temp_reg_cap = &ar->ab->hal_reg_cap[phy_id];
 			}
 
 			ath11k_mac_update_ch_list(ar, band,
-						  reg_cap->low_5ghz_chan,
-						  reg_cap->high_5ghz_chan);
+						  temp_reg_cap->low_5ghz_chan,
+						  temp_reg_cap->high_5ghz_chan);
 		}
 	}
 
-- 
2.25.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  parent reply	other threads:[~2021-08-04 18:12 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-04 18:12 [PATCH 0/3] ath11k: enable support of 6G band for WCN6855 Jouni Malinen
2021-08-04 18:12 ` Jouni Malinen
2021-08-04 18:12 ` [PATCH 1/3] ath11k: re-enable ht_cap/vht_cap for 5G " Jouni Malinen
2021-08-04 18:12   ` Jouni Malinen
2021-09-28 13:22   ` Kalle Valo
2021-09-28 13:22   ` Kalle Valo
2021-08-04 18:12 ` Jouni Malinen [this message]
2021-08-04 18:12   ` [PATCH 2/3] ath11k: enable 6G channels " Jouni Malinen
2021-08-04 18:12 ` [PATCH 3/3] ath11k: copy cap info of 6G band under WMI_HOST_WLAN_5G_CAP " Jouni Malinen
2021-08-04 18:12   ` Jouni Malinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210804181217.88751-3-jouni@codeaurora.org \
    --to=jouni@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wgong@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.