All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: Eddie James <eajames@linux.ibm.com>
Subject: [PATCH linux dev-5.10 13/14] fsi: occ: Add dynamic debug to dump command and response
Date: Wed, 11 Aug 2021 10:42:31 -0500	[thread overview]
Message-ID: <20210811154232.12649-14-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210811154232.12649-1-eajames@linux.ibm.com>

Use the dynamic branching capability of the dynamic debug subsystem
to dump the command and response with the correct OCC device name.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/fsi/fsi-occ.c | 44 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index 90795325b7d9..b0c9322078a1 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -21,6 +21,15 @@
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
+#if !defined(CONFIG_DYNAMIC_DEBUG_CORE)
+#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt)
+#if defined(DEBUG)
+#define DYNAMIC_DEBUG_BRANCH(descriptor) true
+#else /* DEBUG */
+#define DYNAMIC_DEBUG_BRANCH(descriptor) false
+#endif /* DEBUG */
+#endif /* CONFIG_DYNAMIC_DEBUG_CORE */
+
 #define OCC_SRAM_BYTES		4096
 #define OCC_CMD_DATA_BYTES	4090
 #define OCC_RESP_DATA_BYTES	4089
@@ -359,6 +368,20 @@ static int occ_putsram(struct occ *occ, const void *data, ssize_t len,
 	byte_buf[len - 2] = checksum >> 8;
 	byte_buf[len - 1] = checksum & 0xff;
 
+	{
+		DEFINE_DYNAMIC_DEBUG_METADATA(ddm_occ_cmd, "OCC command");
+
+		if (DYNAMIC_DEBUG_BRANCH(ddm_occ_cmd)) {
+			char prefix[64];
+
+			snprintf(prefix, sizeof(prefix), "%s %s: cmd ",
+				 dev_driver_string(occ->dev),
+				 dev_name(occ->dev));
+			print_hex_dump(KERN_DEBUG, prefix, DUMP_PREFIX_OFFSET,
+				       16, 4, byte_buf, len, false);
+		}
+	}
+
 	rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len);
 	if (rc)
 		goto free;
@@ -556,6 +579,27 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
 	}
 
 	*resp_len = resp_data_length + 7;
+
+	{
+		DEFINE_DYNAMIC_DEBUG_METADATA(ddm_occ_rsp,
+					      "OCC response");
+		DEFINE_DYNAMIC_DEBUG_METADATA(ddm_occ_full_rsp,
+					      "OCC full response");
+
+		if (DYNAMIC_DEBUG_BRANCH(ddm_occ_full_rsp) ||
+		    DYNAMIC_DEBUG_BRANCH(ddm_occ_rsp)) {
+			char prefix[64];
+			size_t l = DYNAMIC_DEBUG_BRANCH(ddm_occ_full_rsp) ?
+				*resp_len : 16;
+
+			snprintf(prefix, sizeof(prefix), "%s %s: rsp ",
+				 dev_driver_string(occ->dev),
+				 dev_name(occ->dev));
+			print_hex_dump(KERN_DEBUG, prefix, DUMP_PREFIX_OFFSET,
+				       16, 4, resp, l, false);
+		}
+	}
+
 	rc = occ_verify_checksum(occ, resp, resp_data_length);
 
  done:
-- 
2.27.0


  parent reply	other threads:[~2021-08-11 15:53 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-11 15:42 [PATCH linux dev-5.10 00/14] Rainier and Everest system fixes Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 01/14] i2c: Allow throttling of transfers to client devices Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 02/14] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 03/14] ucd9000: Add a throttle delay attribute in debugfs Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 04/14] fsi: run clock at 100MHz Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 05/14] pmbus: (core) Add a one-shot retry in pmbus_set_page() Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 06/14] pmbus: (max31785) Add a local pmbus_set_page() implementation Eddie James
2021-08-11 16:13   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 07/14] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG Eddie James
2021-08-11 16:14   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 08/14] ARM: dts: aspeed: Rainier: Add fan controller properties Eddie James
2021-08-11 16:14   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 09/14] ARM: dts: aspeed: Everest: " Eddie James
2021-08-11 16:15   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 10/14] ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties Eddie James
2021-08-11 16:17   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 11/14] ARM: dts: aspeed: Add Rainier 2U and 4U device trees for pass 1 hardware Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 12/14] fsi: sbefifo: Increase command timeouts to 30 seconds Eddie James
2021-08-11 15:42 ` Eddie James [this message]
2021-08-11 15:42 ` [PATCH linux dev-5.10 14/14] fsi: sbefifo: Use interruptible mutex locking Eddie James

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210811154232.12649-14-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.