[PATCH v3 0/2] drivers: perf: Add Marvell CN10K LLC-TAD pmu driver

[PATCH v3 0/2] drivers: perf: Add Marvell CN10K LLC-TAD pmu driver

[Bhaskara Budiredla]

This series introduces performance monitor driver to Last-level-cache
tag-and-data (LLC-TAD) PMU which is an intergral part of Marvell CN10K SoCs.
The configuration and functionality of the TAD PMU is covered in patch 1.
The device tree bindings are dealt in patch 2.

v3:
 - rebased on kernel v5.14-rc5
 - disable sampling events via PERF_PMU_CAP_NO_INTERRUPT (Will Deacon)
 - convert tad pmu bindings to schema (Will Deacon)
 - replace tighter semantics with *_relaxed() accesses (Will Deacon)
 - use PMU_EVENT_ATTR_ID generic macro (Will Deacon)
 - allow cleanup of allocations through devm_kcalloc() (Will Deacon)

v2:
 - rebased on kernel v5.13-rc3

Bhaskara Budiredla (2):
  drivers: perf: Add LLC-TAD perf counter support
  dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD PMU
    bindings

 .../bindings/perf/marvell-cn10k-tad.yaml      |  45 ++
 drivers/perf/Kconfig                          |   7 +
 drivers/perf/Makefile                         |   1 +
 drivers/perf/marvell_cn10k_tad_pmu.c          | 429 ++++++++++++++++++
 4 files changed, 482 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
 create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c

-- 
2.17.1

[PATCH v3 0/2] drivers: perf: Add Marvell CN10K LLC-TAD pmu driver

[Bhaskara Budiredla]

This series introduces performance monitor driver to Last-level-cache
tag-and-data (LLC-TAD) PMU which is an intergral part of Marvell CN10K SoCs.
The configuration and functionality of the TAD PMU is covered in patch 1.
The device tree bindings are dealt in patch 2.

v3:
 - rebased on kernel v5.14-rc5
 - disable sampling events via PERF_PMU_CAP_NO_INTERRUPT (Will Deacon)
 - convert tad pmu bindings to schema (Will Deacon)
 - replace tighter semantics with *_relaxed() accesses (Will Deacon)
 - use PMU_EVENT_ATTR_ID generic macro (Will Deacon)
 - allow cleanup of allocations through devm_kcalloc() (Will Deacon)

v2:
 - rebased on kernel v5.13-rc3

Bhaskara Budiredla (2):
  drivers: perf: Add LLC-TAD perf counter support
  dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD PMU
    bindings

 .../bindings/perf/marvell-cn10k-tad.yaml      |  45 ++
 drivers/perf/Kconfig                          |   7 +
 drivers/perf/Makefile                         |   1 +
 drivers/perf/marvell_cn10k_tad_pmu.c          | 429 ++++++++++++++++++
 4 files changed, 482 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
 create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support

[Bhaskara Budiredla]

This driver adds support for Last-level cache tag-and-data unit
(LLC-TAD) PMU that is featured in some of the Marvell's CN10K
infrastructure silicons.

The LLC is divided into 2N slices distributed across N Mesh tiles
in a single-socket configuration. The driver always configures the
same counter for all of the TADs. The user would end up effectively
reserving one of eight counters in every TAD to look across all TADs.
The occurrences of events are aggregated and presented to the user
at the end of an application run. The driver does not provide a way
for the user to partition TADs so that different TADs are used for
different applications.

The event counters are zeroed on start event counting to avoid any
rollover issues. TAD perf counters are 64-bit, so it's not currently
possible to overflow event counters at current mesh and core
frequencies.

To measure tad pmu events use perf tool stat command. For instance:

perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application>
perf stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application>

Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
---
 drivers/perf/Kconfig                 |   7 +
 drivers/perf/Makefile                |   1 +
 drivers/perf/marvell_cn10k_tad_pmu.c | 429 +++++++++++++++++++++++++++
 3 files changed, 437 insertions(+)
 create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 77522e5efe11..73dca11f8080 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -137,6 +137,13 @@ config ARM_DMC620_PMU
 	  Support for PMU events monitoring on the ARM DMC-620 memory
 	  controller.
 
+config MARVELL_CN10K_TAD_PMU
+	tristate "Marvell CN10K LLC-TAD PMU"
+	depends on ARM64
+	help
+	  Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
+	  performance monitors on CN10K family silicons.
+
 source "drivers/perf/hisilicon/Kconfig"
 
 endmenu
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 5260b116c7da..2db5418d5b0a 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
 obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
 obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
+obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
diff --git a/drivers/perf/marvell_cn10k_tad_pmu.c b/drivers/perf/marvell_cn10k_tad_pmu.c
new file mode 100644
index 000000000000..fec8b90d52d2
--- /dev/null
+++ b/drivers/perf/marvell_cn10k_tad_pmu.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell CN10K LLC-TAD perf driver
+ *
+ * Copyright (C) 2021 Marvell.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "tad_pmu: " fmt
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/cpuhotplug.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/arm-smccc.h>
+
+#define TAD_PFC_OFFSET		0x0800
+#define TAD_PFC(counter)	(TAD_PFC_OFFSET | (counter << 3))
+#define TAD_PRF_OFFSET		0x0900
+#define TAD_PRF(counter)	(TAD_PRF_OFFSET | (counter << 3))
+#define TAD_PRF_CNTSEL_MASK	0xFF
+#define TAD_MAX_COUNTERS	8
+
+#define to_tad_pmu(p) (container_of(p, struct tad_pmu, pmu))
+
+struct tad_region {
+	void __iomem	*base;
+};
+
+struct tad_pmu {
+	struct pmu pmu;
+	struct tad_region *regions;
+	u32 region_cnt;
+	unsigned int cpu;
+	struct hlist_node node;
+	struct perf_event *events[TAD_MAX_COUNTERS];
+	DECLARE_BITMAP(counters_map, TAD_MAX_COUNTERS);
+};
+
+static int tad_pmu_cpuhp_state;
+
+static void tad_pmu_event_counter_read(struct perf_event *event)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u32 counter_idx = hwc->idx;
+	u64 delta, prev, new;
+	int i;
+
+	do {
+		prev = local64_read(&hwc->prev_count);
+		for (i = 0, new = 0; i < tad_pmu->region_cnt; i++)
+			new += readq(tad_pmu->regions[i].base +
+				     TAD_PFC(counter_idx));
+	} while (local64_cmpxchg(&hwc->prev_count, prev, new) != prev);
+
+	delta = (new - prev) & GENMASK_ULL(63, 0);
+	local64_add(delta, &event->count);
+}
+
+static void tad_pmu_event_counter_stop(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u32 counter_idx = hwc->idx;
+	int i;
+
+	/* TAD()_PFC() stop counting on the write
+	 * which sets TAD()_PRF()[CNTSEL] == 0
+	 */
+	for (i = 0; i < tad_pmu->region_cnt; i++)
+		writeq_relaxed(0, tad_pmu->regions[i].base +
+			       TAD_PRF(counter_idx));
+
+	tad_pmu_event_counter_read(event);
+	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+}
+
+static void tad_pmu_event_counter_start(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u32 event_idx = event->attr.config;
+	u32 counter_idx = hwc->idx;
+	u64 reg_val;
+	int i;
+
+	hwc->state = 0;
+
+	/* Typically TAD_PFC() are zeroed to start counting */
+	for (i = 0; i < tad_pmu->region_cnt; i++)
+		writeq_relaxed(0, tad_pmu->regions[i].base +
+			       TAD_PFC(counter_idx));
+
+	/* TAD()_PFC() start counting on the write
+	 * which sets TAD()_PRF()[CNTSEL] != 0
+	 */
+	for (i = 0; i < tad_pmu->region_cnt; i++) {
+		reg_val = readq_relaxed(tad_pmu->regions[i].base +
+					TAD_PRF(counter_idx));
+		reg_val |= (event_idx & 0xFF);
+		writeq_relaxed(reg_val,	tad_pmu->regions[i].base +
+			       TAD_PRF(counter_idx));
+	}
+}
+
+static void tad_pmu_event_counter_del(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	tad_pmu_event_counter_stop(event, flags | PERF_EF_UPDATE);
+	tad_pmu->events[idx] = NULL;
+	clear_bit(idx, tad_pmu->counters_map);
+}
+
+static int tad_pmu_event_counter_add(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	/* Get a free counter for this event */
+	idx = find_first_zero_bit(tad_pmu->counters_map, TAD_MAX_COUNTERS);
+	if (idx == TAD_MAX_COUNTERS)
+		return -EAGAIN;
+
+	set_bit(idx, tad_pmu->counters_map);
+
+	hwc->idx = idx;
+	hwc->state = PERF_HES_STOPPED;
+	tad_pmu->events[idx] = event;
+
+	if (flags & PERF_EF_START)
+		tad_pmu_event_counter_start(event, flags);
+
+	return 0;
+}
+
+static int tad_pmu_event_init(struct perf_event *event)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+
+	if (!event->attr.disabled)
+		return -EINVAL;
+
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	if (event->state != PERF_EVENT_STATE_OFF)
+		return -EINVAL;
+
+	event->cpu = tad_pmu->cpu;
+	event->hw.idx = -1;
+	event->hw.config_base = event->attr.config;
+
+	return 0;
+}
+
+static ssize_t tad_pmu_event_show(struct device *dev,
+				struct device_attribute *attr, char *page)
+{
+	struct perf_pmu_events_attr *pmu_attr;
+
+	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+	return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
+#define TAD_PMU_EVENT_ATTR(name, config)			\
+	PMU_EVENT_ATTR_ID(name, tad_pmu_event_show, config)
+
+static struct attribute *tad_pmu_event_attrs[] = {
+	TAD_PMU_EVENT_ATTR(tad_none, 0x0),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_in_any, 0x1),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_in_mn, 0x2),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_in_exlmn, 0x3),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_any, 0x4),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_mn, 0x5),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_exlmn, 0x6),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_dss, 0x7),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_retry_dss, 0x8),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_any, 0x9),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_dss, 0xa),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_any, 0xb),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_rd, 0xc),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_wr, 0xd),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_evict, 0xe),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_any, 0xf),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_exlmn, 0x10),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_mn, 0x11),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_exlmn, 0x12),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_mn, 0x13),
+	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_any, 0x14),
+	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_mn, 0x15),
+	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_exlmn, 0x16),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_any, 0x17),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_fill, 0x18),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_dss, 0x19),
+	TAD_PMU_EVENT_ATTR(tad_alloc_dtg, 0x1a),
+	TAD_PMU_EVENT_ATTR(tad_alloc_ltg, 0x1b),
+	TAD_PMU_EVENT_ATTR(tad_alloc_any, 0x1c),
+	TAD_PMU_EVENT_ATTR(tad_hit_dtg, 0x1d),
+	TAD_PMU_EVENT_ATTR(tad_hit_ltg, 0x1e),
+	TAD_PMU_EVENT_ATTR(tad_hit_any, 0x1f),
+	TAD_PMU_EVENT_ATTR(tad_tag_rd, 0x20),
+	TAD_PMU_EVENT_ATTR(tad_dat_rd, 0x21),
+	TAD_PMU_EVENT_ATTR(tad_dat_rd_byp, 0x22),
+	TAD_PMU_EVENT_ATTR(tad_ifb_occ, 0x23),
+	TAD_PMU_EVENT_ATTR(tad_req_occ, 0x24),
+	NULL,
+};
+
+static const struct attribute_group tad_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = tad_pmu_event_attrs,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *tad_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group tad_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = tad_pmu_format_attrs,
+};
+
+static ssize_t tad_pmu_cpumask_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(dev_get_drvdata(dev));
+
+	return cpumap_print_to_pagebuf(true, buf, cpumask_of(tad_pmu->cpu));
+}
+
+static DEVICE_ATTR(cpumask, 0444, tad_pmu_cpumask_show, NULL);
+
+static struct attribute *tad_pmu_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static struct attribute_group tad_pmu_cpumask_attr_group = {
+	.attrs = tad_pmu_cpumask_attrs,
+};
+
+static const struct attribute_group *tad_pmu_attr_groups[] = {
+	&tad_pmu_events_attr_group,
+	&tad_pmu_format_attr_group,
+	&tad_pmu_cpumask_attr_group,
+	NULL,
+};
+
+static int tad_pmu_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct tad_region *regions;
+	struct tad_pmu *tad_pmu;
+	struct resource *res;
+	u32 tad_pmu_page_size;
+	u32 tad_page_size;
+	u32 tad_cnt;
+	int i, ret;
+	char *name;
+
+	tad_pmu = devm_kzalloc(&pdev->dev, sizeof(*tad_pmu), GFP_KERNEL);
+	if (!tad_pmu)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, tad_pmu);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Mem resource not found\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(node, "tad-page-size", &tad_page_size);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't find tad-page-size property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(node, "tad-pmu-page-size",
+				   &tad_pmu_page_size);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't find tad-pmu-page-size property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(node, "tad-cnt", &tad_cnt);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't find tad-cnt property\n");
+		return ret;
+	}
+
+	regions = devm_kcalloc(&pdev->dev, tad_cnt,
+			       sizeof(*regions), GFP_KERNEL);
+	if (!regions)
+		return -ENOMEM;
+
+	/* ioremap the distributed TAD pmu regions */
+	for (i = 0; i < tad_cnt && res->start < res->end; i++) {
+		regions[i].base = devm_ioremap(&pdev->dev,
+					       res->start,
+					       tad_pmu_page_size);
+		if (IS_ERR(regions[i].base)) {
+			dev_err(&pdev->dev, "TAD%d ioremap fail\n", i);
+			return -ENOMEM;
+		}
+		res->start += tad_page_size;
+	}
+
+	tad_pmu->regions = regions;
+	tad_pmu->region_cnt = tad_cnt;
+
+	tad_pmu->pmu = (struct pmu) {
+
+		.module		= THIS_MODULE,
+		.attr_groups	= tad_pmu_attr_groups,
+		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE |
+				  PERF_PMU_CAP_NO_INTERRUPT,
+		.task_ctx_nr	= perf_invalid_context,
+
+		.event_init	= tad_pmu_event_init,
+		.add		= tad_pmu_event_counter_add,
+		.del		= tad_pmu_event_counter_del,
+		.start		= tad_pmu_event_counter_start,
+		.stop		= tad_pmu_event_counter_stop,
+		.read		= tad_pmu_event_counter_read,
+	};
+
+	tad_pmu->cpu = raw_smp_processor_id();
+
+	/* Register pmu instance for cpu hotplug */
+	ret = cpuhp_state_add_instance_nocalls(tad_pmu_cpuhp_state,
+					       &tad_pmu->node);
+	if (ret) {
+		dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
+		return ret;
+	}
+
+	name = "tad";
+	ret = perf_pmu_register(&tad_pmu->pmu, name, -1);
+	if (ret)
+		cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
+						    &tad_pmu->node);
+
+	return ret;
+}
+
+static int tad_pmu_remove(struct platform_device *pdev)
+{
+	struct tad_pmu *pmu = platform_get_drvdata(pdev);
+
+	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
+						&pmu->node);
+	perf_pmu_unregister(&pmu->pmu);
+
+	return 0;
+}
+
+static const struct of_device_id tad_pmu_of_match[] = {
+	{ .compatible = "marvell,cn10k-tad-pmu", },
+	{},
+};
+
+static struct platform_driver tad_pmu_driver = {
+	.driver         = {
+		.name   = "cn10k_tad_pmu",
+		.of_match_table = of_match_ptr(tad_pmu_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe          = tad_pmu_probe,
+	.remove         = tad_pmu_remove,
+};
+
+static int tad_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	struct tad_pmu *pmu = hlist_entry_safe(node, struct tad_pmu, node);
+	unsigned int target;
+
+	if (cpu != pmu->cpu)
+		return 0;
+
+	target = cpumask_any_but(cpu_online_mask, cpu);
+	if (target >= nr_cpu_ids)
+		return 0;
+
+	perf_pmu_migrate_context(&pmu->pmu, cpu, target);
+	pmu->cpu = target;
+
+	return 0;
+}
+
+static int __init tad_pmu_init(void)
+{
+	int ret;
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+				      "perf/cn10k/tadpmu:online",
+				      NULL,
+				      tad_pmu_offline_cpu);
+	if (ret < 0)
+		return ret;
+	tad_pmu_cpuhp_state = ret;
+	return platform_driver_register(&tad_pmu_driver);
+}
+
+static void __exit tad_pmu_exit(void)
+{
+	platform_driver_unregister(&tad_pmu_driver);
+	cpuhp_remove_multi_state(tad_pmu_cpuhp_state);
+}
+
+module_init(tad_pmu_init);
+module_exit(tad_pmu_exit);
+
+MODULE_DESCRIPTION("Marvell CN10K LLC-TAD Perf driver");
+MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@marvell.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

[PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support

[Bhaskara Budiredla]

This driver adds support for Last-level cache tag-and-data unit
(LLC-TAD) PMU that is featured in some of the Marvell's CN10K
infrastructure silicons.

The LLC is divided into 2N slices distributed across N Mesh tiles
in a single-socket configuration. The driver always configures the
same counter for all of the TADs. The user would end up effectively
reserving one of eight counters in every TAD to look across all TADs.
The occurrences of events are aggregated and presented to the user
at the end of an application run. The driver does not provide a way
for the user to partition TADs so that different TADs are used for
different applications.

The event counters are zeroed on start event counting to avoid any
rollover issues. TAD perf counters are 64-bit, so it's not currently
possible to overflow event counters at current mesh and core
frequencies.

To measure tad pmu events use perf tool stat command. For instance:

perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application>
perf stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application>

Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
---
 drivers/perf/Kconfig                 |   7 +
 drivers/perf/Makefile                |   1 +
 drivers/perf/marvell_cn10k_tad_pmu.c | 429 +++++++++++++++++++++++++++
 3 files changed, 437 insertions(+)
 create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 77522e5efe11..73dca11f8080 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -137,6 +137,13 @@ config ARM_DMC620_PMU
 	  Support for PMU events monitoring on the ARM DMC-620 memory
 	  controller.
 
+config MARVELL_CN10K_TAD_PMU
+	tristate "Marvell CN10K LLC-TAD PMU"
+	depends on ARM64
+	help
+	  Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
+	  performance monitors on CN10K family silicons.
+
 source "drivers/perf/hisilicon/Kconfig"
 
 endmenu
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 5260b116c7da..2db5418d5b0a 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
 obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
 obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
+obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
diff --git a/drivers/perf/marvell_cn10k_tad_pmu.c b/drivers/perf/marvell_cn10k_tad_pmu.c
new file mode 100644
index 000000000000..fec8b90d52d2
--- /dev/null
+++ b/drivers/perf/marvell_cn10k_tad_pmu.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell CN10K LLC-TAD perf driver
+ *
+ * Copyright (C) 2021 Marvell.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "tad_pmu: " fmt
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/cpuhotplug.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/arm-smccc.h>
+
+#define TAD_PFC_OFFSET		0x0800
+#define TAD_PFC(counter)	(TAD_PFC_OFFSET | (counter << 3))
+#define TAD_PRF_OFFSET		0x0900
+#define TAD_PRF(counter)	(TAD_PRF_OFFSET | (counter << 3))
+#define TAD_PRF_CNTSEL_MASK	0xFF
+#define TAD_MAX_COUNTERS	8
+
+#define to_tad_pmu(p) (container_of(p, struct tad_pmu, pmu))
+
+struct tad_region {
+	void __iomem	*base;
+};
+
+struct tad_pmu {
+	struct pmu pmu;
+	struct tad_region *regions;
+	u32 region_cnt;
+	unsigned int cpu;
+	struct hlist_node node;
+	struct perf_event *events[TAD_MAX_COUNTERS];
+	DECLARE_BITMAP(counters_map, TAD_MAX_COUNTERS);
+};
+
+static int tad_pmu_cpuhp_state;
+
+static void tad_pmu_event_counter_read(struct perf_event *event)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u32 counter_idx = hwc->idx;
+	u64 delta, prev, new;
+	int i;
+
+	do {
+		prev = local64_read(&hwc->prev_count);
+		for (i = 0, new = 0; i < tad_pmu->region_cnt; i++)
+			new += readq(tad_pmu->regions[i].base +
+				     TAD_PFC(counter_idx));
+	} while (local64_cmpxchg(&hwc->prev_count, prev, new) != prev);
+
+	delta = (new - prev) & GENMASK_ULL(63, 0);
+	local64_add(delta, &event->count);
+}
+
+static void tad_pmu_event_counter_stop(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u32 counter_idx = hwc->idx;
+	int i;
+
+	/* TAD()_PFC() stop counting on the write
+	 * which sets TAD()_PRF()[CNTSEL] == 0
+	 */
+	for (i = 0; i < tad_pmu->region_cnt; i++)
+		writeq_relaxed(0, tad_pmu->regions[i].base +
+			       TAD_PRF(counter_idx));
+
+	tad_pmu_event_counter_read(event);
+	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+}
+
+static void tad_pmu_event_counter_start(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u32 event_idx = event->attr.config;
+	u32 counter_idx = hwc->idx;
+	u64 reg_val;
+	int i;
+
+	hwc->state = 0;
+
+	/* Typically TAD_PFC() are zeroed to start counting */
+	for (i = 0; i < tad_pmu->region_cnt; i++)
+		writeq_relaxed(0, tad_pmu->regions[i].base +
+			       TAD_PFC(counter_idx));
+
+	/* TAD()_PFC() start counting on the write
+	 * which sets TAD()_PRF()[CNTSEL] != 0
+	 */
+	for (i = 0; i < tad_pmu->region_cnt; i++) {
+		reg_val = readq_relaxed(tad_pmu->regions[i].base +
+					TAD_PRF(counter_idx));
+		reg_val |= (event_idx & 0xFF);
+		writeq_relaxed(reg_val,	tad_pmu->regions[i].base +
+			       TAD_PRF(counter_idx));
+	}
+}
+
+static void tad_pmu_event_counter_del(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	tad_pmu_event_counter_stop(event, flags | PERF_EF_UPDATE);
+	tad_pmu->events[idx] = NULL;
+	clear_bit(idx, tad_pmu->counters_map);
+}
+
+static int tad_pmu_event_counter_add(struct perf_event *event, int flags)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	/* Get a free counter for this event */
+	idx = find_first_zero_bit(tad_pmu->counters_map, TAD_MAX_COUNTERS);
+	if (idx == TAD_MAX_COUNTERS)
+		return -EAGAIN;
+
+	set_bit(idx, tad_pmu->counters_map);
+
+	hwc->idx = idx;
+	hwc->state = PERF_HES_STOPPED;
+	tad_pmu->events[idx] = event;
+
+	if (flags & PERF_EF_START)
+		tad_pmu_event_counter_start(event, flags);
+
+	return 0;
+}
+
+static int tad_pmu_event_init(struct perf_event *event)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
+
+	if (!event->attr.disabled)
+		return -EINVAL;
+
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	if (event->state != PERF_EVENT_STATE_OFF)
+		return -EINVAL;
+
+	event->cpu = tad_pmu->cpu;
+	event->hw.idx = -1;
+	event->hw.config_base = event->attr.config;
+
+	return 0;
+}
+
+static ssize_t tad_pmu_event_show(struct device *dev,
+				struct device_attribute *attr, char *page)
+{
+	struct perf_pmu_events_attr *pmu_attr;
+
+	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+	return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
+#define TAD_PMU_EVENT_ATTR(name, config)			\
+	PMU_EVENT_ATTR_ID(name, tad_pmu_event_show, config)
+
+static struct attribute *tad_pmu_event_attrs[] = {
+	TAD_PMU_EVENT_ATTR(tad_none, 0x0),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_in_any, 0x1),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_in_mn, 0x2),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_in_exlmn, 0x3),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_any, 0x4),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_mn, 0x5),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_exlmn, 0x6),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_dss, 0x7),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_retry_dss, 0x8),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_any, 0x9),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_dss, 0xa),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_any, 0xb),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_rd, 0xc),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_wr, 0xd),
+	TAD_PMU_EVENT_ATTR(tad_req_msh_out_evict, 0xe),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_any, 0xf),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_exlmn, 0x10),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_mn, 0x11),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_exlmn, 0x12),
+	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_mn, 0x13),
+	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_any, 0x14),
+	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_mn, 0x15),
+	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_exlmn, 0x16),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_any, 0x17),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_fill, 0x18),
+	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_dss, 0x19),
+	TAD_PMU_EVENT_ATTR(tad_alloc_dtg, 0x1a),
+	TAD_PMU_EVENT_ATTR(tad_alloc_ltg, 0x1b),
+	TAD_PMU_EVENT_ATTR(tad_alloc_any, 0x1c),
+	TAD_PMU_EVENT_ATTR(tad_hit_dtg, 0x1d),
+	TAD_PMU_EVENT_ATTR(tad_hit_ltg, 0x1e),
+	TAD_PMU_EVENT_ATTR(tad_hit_any, 0x1f),
+	TAD_PMU_EVENT_ATTR(tad_tag_rd, 0x20),
+	TAD_PMU_EVENT_ATTR(tad_dat_rd, 0x21),
+	TAD_PMU_EVENT_ATTR(tad_dat_rd_byp, 0x22),
+	TAD_PMU_EVENT_ATTR(tad_ifb_occ, 0x23),
+	TAD_PMU_EVENT_ATTR(tad_req_occ, 0x24),
+	NULL,
+};
+
+static const struct attribute_group tad_pmu_events_attr_group = {
+	.name = "events",
+	.attrs = tad_pmu_event_attrs,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *tad_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group tad_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = tad_pmu_format_attrs,
+};
+
+static ssize_t tad_pmu_cpumask_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct tad_pmu *tad_pmu = to_tad_pmu(dev_get_drvdata(dev));
+
+	return cpumap_print_to_pagebuf(true, buf, cpumask_of(tad_pmu->cpu));
+}
+
+static DEVICE_ATTR(cpumask, 0444, tad_pmu_cpumask_show, NULL);
+
+static struct attribute *tad_pmu_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static struct attribute_group tad_pmu_cpumask_attr_group = {
+	.attrs = tad_pmu_cpumask_attrs,
+};
+
+static const struct attribute_group *tad_pmu_attr_groups[] = {
+	&tad_pmu_events_attr_group,
+	&tad_pmu_format_attr_group,
+	&tad_pmu_cpumask_attr_group,
+	NULL,
+};
+
+static int tad_pmu_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct tad_region *regions;
+	struct tad_pmu *tad_pmu;
+	struct resource *res;
+	u32 tad_pmu_page_size;
+	u32 tad_page_size;
+	u32 tad_cnt;
+	int i, ret;
+	char *name;
+
+	tad_pmu = devm_kzalloc(&pdev->dev, sizeof(*tad_pmu), GFP_KERNEL);
+	if (!tad_pmu)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, tad_pmu);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Mem resource not found\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(node, "tad-page-size", &tad_page_size);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't find tad-page-size property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(node, "tad-pmu-page-size",
+				   &tad_pmu_page_size);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't find tad-pmu-page-size property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(node, "tad-cnt", &tad_cnt);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't find tad-cnt property\n");
+		return ret;
+	}
+
+	regions = devm_kcalloc(&pdev->dev, tad_cnt,
+			       sizeof(*regions), GFP_KERNEL);
+	if (!regions)
+		return -ENOMEM;
+
+	/* ioremap the distributed TAD pmu regions */
+	for (i = 0; i < tad_cnt && res->start < res->end; i++) {
+		regions[i].base = devm_ioremap(&pdev->dev,
+					       res->start,
+					       tad_pmu_page_size);
+		if (IS_ERR(regions[i].base)) {
+			dev_err(&pdev->dev, "TAD%d ioremap fail\n", i);
+			return -ENOMEM;
+		}
+		res->start += tad_page_size;
+	}
+
+	tad_pmu->regions = regions;
+	tad_pmu->region_cnt = tad_cnt;
+
+	tad_pmu->pmu = (struct pmu) {
+
+		.module		= THIS_MODULE,
+		.attr_groups	= tad_pmu_attr_groups,
+		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE |
+				  PERF_PMU_CAP_NO_INTERRUPT,
+		.task_ctx_nr	= perf_invalid_context,
+
+		.event_init	= tad_pmu_event_init,
+		.add		= tad_pmu_event_counter_add,
+		.del		= tad_pmu_event_counter_del,
+		.start		= tad_pmu_event_counter_start,
+		.stop		= tad_pmu_event_counter_stop,
+		.read		= tad_pmu_event_counter_read,
+	};
+
+	tad_pmu->cpu = raw_smp_processor_id();
+
+	/* Register pmu instance for cpu hotplug */
+	ret = cpuhp_state_add_instance_nocalls(tad_pmu_cpuhp_state,
+					       &tad_pmu->node);
+	if (ret) {
+		dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
+		return ret;
+	}
+
+	name = "tad";
+	ret = perf_pmu_register(&tad_pmu->pmu, name, -1);
+	if (ret)
+		cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
+						    &tad_pmu->node);
+
+	return ret;
+}
+
+static int tad_pmu_remove(struct platform_device *pdev)
+{
+	struct tad_pmu *pmu = platform_get_drvdata(pdev);
+
+	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
+						&pmu->node);
+	perf_pmu_unregister(&pmu->pmu);
+
+	return 0;
+}
+
+static const struct of_device_id tad_pmu_of_match[] = {
+	{ .compatible = "marvell,cn10k-tad-pmu", },
+	{},
+};
+
+static struct platform_driver tad_pmu_driver = {
+	.driver         = {
+		.name   = "cn10k_tad_pmu",
+		.of_match_table = of_match_ptr(tad_pmu_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe          = tad_pmu_probe,
+	.remove         = tad_pmu_remove,
+};
+
+static int tad_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	struct tad_pmu *pmu = hlist_entry_safe(node, struct tad_pmu, node);
+	unsigned int target;
+
+	if (cpu != pmu->cpu)
+		return 0;
+
+	target = cpumask_any_but(cpu_online_mask, cpu);
+	if (target >= nr_cpu_ids)
+		return 0;
+
+	perf_pmu_migrate_context(&pmu->pmu, cpu, target);
+	pmu->cpu = target;
+
+	return 0;
+}
+
+static int __init tad_pmu_init(void)
+{
+	int ret;
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+				      "perf/cn10k/tadpmu:online",
+				      NULL,
+				      tad_pmu_offline_cpu);
+	if (ret < 0)
+		return ret;
+	tad_pmu_cpuhp_state = ret;
+	return platform_driver_register(&tad_pmu_driver);
+}
+
+static void __exit tad_pmu_exit(void)
+{
+	platform_driver_unregister(&tad_pmu_driver);
+	cpuhp_remove_multi_state(tad_pmu_cpuhp_state);
+}
+
+module_init(tad_pmu_init);
+module_exit(tad_pmu_exit);
+
+MODULE_DESCRIPTION("Marvell CN10K LLC-TAD Perf driver");
+MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@marvell.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Bhaskara Budiredla]

Add device tree bindings for Last-level-cache Tag-and-data
(LLC-TAD) unit PMU for Marvell CN10K SoCs.

Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
---
 .../bindings/perf/marvell-cn10k-tad.yaml      | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml

diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
new file mode 100644
index 000000000000..f66c5c31ecd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K LLC-TAD performance monitor
+
+maintainers:
+  - Bhaskara Budiredla <bbudiredla@marvell.com>
+
+description: |
+  The Tag-and-Data units (TADs) maintain coherence and contain CN10K
+  shared on-chip last level cache (LLC). The tad pmu measures the
+  performance of last-level cache. Each tad pmu supports up to eight
+  counters.
+
+  The DT setup comprises of number of tad blocks, the sizes of pmu
+  regions, tad blocks and overall base address of the HW.
+
+properties:
+  compatible:
+    const: marvell,cn10k-tad-pmu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - tad-cnt
+  - tad-page-size
+  - tad-pmu-page-size
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    tad_pmu@0x87e280000000 {
+        compatible = "marvell,cn10k-tad-pmu";
+        tad-cnt = <1>;
+        tad-page-size = <0x1000>;
+        tad-pmu-page-size = <0x1000>;
+        reg = <0x87e2 0x80000000 0x0 0x1000>;
+    };
-- 
2.17.1

[PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Bhaskara Budiredla]

Add device tree bindings for Last-level-cache Tag-and-data
(LLC-TAD) unit PMU for Marvell CN10K SoCs.

Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
---
 .../bindings/perf/marvell-cn10k-tad.yaml      | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml

diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
new file mode 100644
index 000000000000..f66c5c31ecd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K LLC-TAD performance monitor
+
+maintainers:
+  - Bhaskara Budiredla <bbudiredla@marvell.com>
+
+description: |
+  The Tag-and-Data units (TADs) maintain coherence and contain CN10K
+  shared on-chip last level cache (LLC). The tad pmu measures the
+  performance of last-level cache. Each tad pmu supports up to eight
+  counters.
+
+  The DT setup comprises of number of tad blocks, the sizes of pmu
+  regions, tad blocks and overall base address of the HW.
+
+properties:
+  compatible:
+    const: marvell,cn10k-tad-pmu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - tad-cnt
+  - tad-page-size
+  - tad-pmu-page-size
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    tad_pmu@0x87e280000000 {
+        compatible = "marvell,cn10k-tad-pmu";
+        tad-cnt = <1>;
+        tad-page-size = <0x1000>;
+        tad-pmu-page-size = <0x1000>;
+        reg = <0x87e2 0x80000000 0x0 0x1000>;
+    };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Rob Herring]

On Thu, 12 Aug 2021 23:12:09 +0530, Bhaskara Budiredla wrote:
> Add device tree bindings for Last-level-cache Tag-and-data
> (LLC-TAD) unit PMU for Marvell CN10K SoCs.
> 
> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
> ---
>  .../bindings/perf/marvell-cn10k-tad.yaml      | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dts:19.32-25.11: Warning (unit_address_format): /example-0/tad_pmu@0x87e280000000: unit name should not have leading "0x"
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dt.yaml: example-0: tad_pmu@0x87e280000000:reg:0: [34786, 2147483648, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dt.yaml: example-0: 'tad_pmu@0x87e280000000' does not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/dt-core.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dt.yaml: tad_pmu@0x87e280000000: 'tad-cnt', 'tad-page-size', 'tad-pmu-page-size' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1516395

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Rob Herring]

On Thu, 12 Aug 2021 23:12:09 +0530, Bhaskara Budiredla wrote:
> Add device tree bindings for Last-level-cache Tag-and-data
> (LLC-TAD) unit PMU for Marvell CN10K SoCs.
> 
> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
> ---
>  .../bindings/perf/marvell-cn10k-tad.yaml      | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dts:19.32-25.11: Warning (unit_address_format): /example-0/tad_pmu@0x87e280000000: unit name should not have leading "0x"
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dt.yaml: example-0: tad_pmu@0x87e280000000:reg:0: [34786, 2147483648, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dt.yaml: example-0: 'tad_pmu@0x87e280000000' does not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/dt-core.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.example.dt.yaml: tad_pmu@0x87e280000000: 'tad-cnt', 'tad-page-size', 'tad-pmu-page-size' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1516395

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support

[kajoljain]

On 8/12/21 11:12 PM, Bhaskara Budiredla wrote:
> This driver adds support for Last-level cache tag-and-data unit
> (LLC-TAD) PMU that is featured in some of the Marvell's CN10K
> infrastructure silicons.
> 
> The LLC is divided into 2N slices distributed across N Mesh tiles
> in a single-socket configuration. The driver always configures the
> same counter for all of the TADs. The user would end up effectively
> reserving one of eight counters in every TAD to look across all TADs.
> The occurrences of events are aggregated and presented to the user
> at the end of an application run. The driver does not provide a way
> for the user to partition TADs so that different TADs are used for
> different applications.
> 
> The event counters are zeroed on start event counting to avoid any
> rollover issues. TAD perf counters are 64-bit, so it's not currently
> possible to overflow event counters at current mesh and core
> frequencies.
> 
> To measure tad pmu events use perf tool stat command. For instance:
> 
> perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application>
> perf stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application>
> 
> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
> ---
>  drivers/perf/Kconfig                 |   7 +
>  drivers/perf/Makefile                |   1 +
>  drivers/perf/marvell_cn10k_tad_pmu.c | 429 +++++++++++++++++++++++++++
>  3 files changed, 437 insertions(+)
>  create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c
> 
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 77522e5efe11..73dca11f8080 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -137,6 +137,13 @@ config ARM_DMC620_PMU
>  	  Support for PMU events monitoring on the ARM DMC-620 memory
>  	  controller.
>  
> +config MARVELL_CN10K_TAD_PMU
> +	tristate "Marvell CN10K LLC-TAD PMU"
> +	depends on ARM64
> +	help
> +	  Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
> +	  performance monitors on CN10K family silicons.
> +
>  source "drivers/perf/hisilicon/Kconfig"
>  
>  endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 5260b116c7da..2db5418d5b0a 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
>  obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
>  obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
>  obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
> +obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
> diff --git a/drivers/perf/marvell_cn10k_tad_pmu.c b/drivers/perf/marvell_cn10k_tad_pmu.c
> new file mode 100644
> index 000000000000..fec8b90d52d2
> --- /dev/null
> +++ b/drivers/perf/marvell_cn10k_tad_pmu.c
> @@ -0,0 +1,429 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Marvell CN10K LLC-TAD perf driver
> + *
> + * Copyright (C) 2021 Marvell.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) "tad_pmu: " fmt
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/cpuhotplug.h>
> +#include <linux/perf_event.h>
> +#include <linux/platform_device.h>
> +#include <linux/arm-smccc.h>
> +
> +#define TAD_PFC_OFFSET		0x0800
> +#define TAD_PFC(counter)	(TAD_PFC_OFFSET | (counter << 3))
> +#define TAD_PRF_OFFSET		0x0900
> +#define TAD_PRF(counter)	(TAD_PRF_OFFSET | (counter << 3))
> +#define TAD_PRF_CNTSEL_MASK	0xFF
> +#define TAD_MAX_COUNTERS	8
> +
> +#define to_tad_pmu(p) (container_of(p, struct tad_pmu, pmu))
> +
> +struct tad_region {
> +	void __iomem	*base;
> +};
> +
> +struct tad_pmu {
> +	struct pmu pmu;
> +	struct tad_region *regions;
> +	u32 region_cnt;
> +	unsigned int cpu;
> +	struct hlist_node node;
> +	struct perf_event *events[TAD_MAX_COUNTERS];
> +	DECLARE_BITMAP(counters_map, TAD_MAX_COUNTERS);
> +};
> +
> +static int tad_pmu_cpuhp_state;
> +
> +static void tad_pmu_event_counter_read(struct perf_event *event)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	u32 counter_idx = hwc->idx;
> +	u64 delta, prev, new;
> +	int i;
> +
> +	do {
> +		prev = local64_read(&hwc->prev_count);
> +		for (i = 0, new = 0; i < tad_pmu->region_cnt; i++)
> +			new += readq(tad_pmu->regions[i].base +
> +				     TAD_PFC(counter_idx));
> +	} while (local64_cmpxchg(&hwc->prev_count, prev, new) != prev);
> +
> +	delta = (new - prev) & GENMASK_ULL(63, 0);
> +	local64_add(delta, &event->count);
> +}
> +
> +static void tad_pmu_event_counter_stop(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	u32 counter_idx = hwc->idx;
> +	int i;
> +
> +	/* TAD()_PFC() stop counting on the write
> +	 * which sets TAD()_PRF()[CNTSEL] == 0
> +	 */
> +	for (i = 0; i < tad_pmu->region_cnt; i++)
> +		writeq_relaxed(0, tad_pmu->regions[i].base +
> +			       TAD_PRF(counter_idx));
> +
> +	tad_pmu_event_counter_read(event);
> +	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
> +}
> +
> +static void tad_pmu_event_counter_start(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	u32 event_idx = event->attr.config;
> +	u32 counter_idx = hwc->idx;
> +	u64 reg_val;
> +	int i;
> +
> +	hwc->state = 0;
> +
> +	/* Typically TAD_PFC() are zeroed to start counting */
> +	for (i = 0; i < tad_pmu->region_cnt; i++)
> +		writeq_relaxed(0, tad_pmu->regions[i].base +
> +			       TAD_PFC(counter_idx));
> +
> +	/* TAD()_PFC() start counting on the write
> +	 * which sets TAD()_PRF()[CNTSEL] != 0
> +	 */
> +	for (i = 0; i < tad_pmu->region_cnt; i++) {
> +		reg_val = readq_relaxed(tad_pmu->regions[i].base +
> +					TAD_PRF(counter_idx));
> +		reg_val |= (event_idx & 0xFF);
> +		writeq_relaxed(reg_val,	tad_pmu->regions[i].base +
> +			       TAD_PRF(counter_idx));
> +	}
> +}
> +
> +static void tad_pmu_event_counter_del(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	int idx = hwc->idx;
> +
> +	tad_pmu_event_counter_stop(event, flags | PERF_EF_UPDATE);
> +	tad_pmu->events[idx] = NULL;
> +	clear_bit(idx, tad_pmu->counters_map);
> +}
> +
> +static int tad_pmu_event_counter_add(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	int idx;
> +
> +	/* Get a free counter for this event */
> +	idx = find_first_zero_bit(tad_pmu->counters_map, TAD_MAX_COUNTERS);
> +	if (idx == TAD_MAX_COUNTERS)
> +		return -EAGAIN;
> +
> +	set_bit(idx, tad_pmu->counters_map);
> +
> +	hwc->idx = idx;
> +	hwc->state = PERF_HES_STOPPED;
> +	tad_pmu->events[idx] = event;
> +
> +	if (flags & PERF_EF_START)
> +		tad_pmu_event_counter_start(event, flags);
> +
> +	return 0;
> +}
> +
> +static int tad_pmu_event_init(struct perf_event *event)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +
> +	if (!event->attr.disabled)
> +		return -EINVAL;
> +
> +	if (event->attr.type != event->pmu->type)
> +		return -ENOENT;
> +
> +	if (event->state != PERF_EVENT_STATE_OFF)
> +		return -EINVAL;
> +
> +	event->cpu = tad_pmu->cpu;
> +	event->hw.idx = -1;
> +	event->hw.config_base = event->attr.config;
> +
> +	return 0;
> +}
> +
> +static ssize_t tad_pmu_event_show(struct device *dev,
> +				struct device_attribute *attr, char *page)
> +{
> +	struct perf_pmu_events_attr *pmu_attr;
> +
> +	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
> +	return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
> +}
> +
> +#define TAD_PMU_EVENT_ATTR(name, config)			\
> +	PMU_EVENT_ATTR_ID(name, tad_pmu_event_show, config)
> +
> +static struct attribute *tad_pmu_event_attrs[] = {
> +	TAD_PMU_EVENT_ATTR(tad_none, 0x0),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_any, 0x1),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_mn, 0x2),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_exlmn, 0x3),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_any, 0x4),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_mn, 0x5),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_exlmn, 0x6),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_dss, 0x7),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_retry_dss, 0x8),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_any, 0x9),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_dss, 0xa),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_any, 0xb),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_rd, 0xc),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_wr, 0xd),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_evict, 0xe),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_any, 0xf),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_exlmn, 0x10),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_mn, 0x11),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_exlmn, 0x12),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_mn, 0x13),
> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_any, 0x14),
> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_mn, 0x15),
> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_exlmn, 0x16),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_any, 0x17),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_fill, 0x18),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_dss, 0x19),
> +	TAD_PMU_EVENT_ATTR(tad_alloc_dtg, 0x1a),
> +	TAD_PMU_EVENT_ATTR(tad_alloc_ltg, 0x1b),
> +	TAD_PMU_EVENT_ATTR(tad_alloc_any, 0x1c),
> +	TAD_PMU_EVENT_ATTR(tad_hit_dtg, 0x1d),
> +	TAD_PMU_EVENT_ATTR(tad_hit_ltg, 0x1e),
> +	TAD_PMU_EVENT_ATTR(tad_hit_any, 0x1f),
> +	TAD_PMU_EVENT_ATTR(tad_tag_rd, 0x20),
> +	TAD_PMU_EVENT_ATTR(tad_dat_rd, 0x21),
> +	TAD_PMU_EVENT_ATTR(tad_dat_rd_byp, 0x22),
> +	TAD_PMU_EVENT_ATTR(tad_ifb_occ, 0x23),
> +	TAD_PMU_EVENT_ATTR(tad_req_occ, 0x24),
> +	NULL,
> +};
> +
> +static const struct attribute_group tad_pmu_events_attr_group = {
> +	.name = "events",
> +	.attrs = tad_pmu_event_attrs,
> +};
> +
> +PMU_FORMAT_ATTR(event, "config:0-7");
> +
> +static struct attribute *tad_pmu_format_attrs[] = {
> +	&format_attr_event.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group tad_pmu_format_attr_group = {
> +	.name = "format",
> +	.attrs = tad_pmu_format_attrs,
> +};
> +
> +static ssize_t tad_pmu_cpumask_show(struct device *dev,
> +				struct device_attribute *attr, char *buf)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(dev_get_drvdata(dev));
> +
> +	return cpumap_print_to_pagebuf(true, buf, cpumask_of(tad_pmu->cpu));
> +}
> +
> +static DEVICE_ATTR(cpumask, 0444, tad_pmu_cpumask_show, NULL);
> +
> +static struct attribute *tad_pmu_cpumask_attrs[] = {
> +	&dev_attr_cpumask.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group tad_pmu_cpumask_attr_group = {
> +	.attrs = tad_pmu_cpumask_attrs,
> +};
> +
> +static const struct attribute_group *tad_pmu_attr_groups[] = {
> +	&tad_pmu_events_attr_group,
> +	&tad_pmu_format_attr_group,
> +	&tad_pmu_cpumask_attr_group,
> +	NULL,
> +};
> +
> +static int tad_pmu_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct tad_region *regions;
> +	struct tad_pmu *tad_pmu;
> +	struct resource *res;
> +	u32 tad_pmu_page_size;
> +	u32 tad_page_size;
> +	u32 tad_cnt;
> +	int i, ret;
> +	char *name;
> +
> +	tad_pmu = devm_kzalloc(&pdev->dev, sizeof(*tad_pmu), GFP_KERNEL);
> +	if (!tad_pmu)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, tad_pmu);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "Mem resource not found\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = of_property_read_u32(node, "tad-page-size", &tad_page_size);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't find tad-page-size property\n");
> +		return ret;
> +	}
> +
> +	ret = of_property_read_u32(node, "tad-pmu-page-size",
> +				   &tad_pmu_page_size);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't find tad-pmu-page-size property\n");
> +		return ret;
> +	}
> +
> +	ret = of_property_read_u32(node, "tad-cnt", &tad_cnt);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't find tad-cnt property\n");
> +		return ret;
> +	}
> +
> +	regions = devm_kcalloc(&pdev->dev, tad_cnt,
> +			       sizeof(*regions), GFP_KERNEL);
> +	if (!regions)
> +		return -ENOMEM;
> +
> +	/* ioremap the distributed TAD pmu regions */
> +	for (i = 0; i < tad_cnt && res->start < res->end; i++) {
> +		regions[i].base = devm_ioremap(&pdev->dev,
> +					       res->start,
> +					       tad_pmu_page_size);
> +		if (IS_ERR(regions[i].base)) {
> +			dev_err(&pdev->dev, "TAD%d ioremap fail\n", i);
> +			return -ENOMEM;
> +		}
> +		res->start += tad_page_size;
> +	}
> +
> +	tad_pmu->regions = regions;
> +	tad_pmu->region_cnt = tad_cnt;
> +
> +	tad_pmu->pmu = (struct pmu) {
> +
> +		.module		= THIS_MODULE,
> +		.attr_groups	= tad_pmu_attr_groups,
> +		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE |
> +				  PERF_PMU_CAP_NO_INTERRUPT,
> +		.task_ctx_nr	= perf_invalid_context,
> +
> +		.event_init	= tad_pmu_event_init,
> +		.add		= tad_pmu_event_counter_add,
> +		.del		= tad_pmu_event_counter_del,
> +		.start		= tad_pmu_event_counter_start,
> +		.stop		= tad_pmu_event_counter_stop,
> +		.read		= tad_pmu_event_counter_read,
> +	};
> +
> +	tad_pmu->cpu = raw_smp_processor_id();
> +

Hi Bhaskara, 
   I think there is some memory leaks in this function. Incase cpuotplug
code fails, don't we need to free momory allocated to `tad_pmu`?

Thanks,
Kajol Jain


> +	/* Register pmu instance for cpu hotplug */
> +	ret = cpuhp_state_add_instance_nocalls(tad_pmu_cpuhp_state,
> +					       &tad_pmu->node);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
> +		return ret;
> +	}
> +
> +	name = "tad";
> +	ret = perf_pmu_register(&tad_pmu->pmu, name, -1);
> +	if (ret)
> +		cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
> +						    &tad_pmu->node);
> +
> +	return ret;
> +}
> +
> +static int tad_pmu_remove(struct platform_device *pdev)
> +{
> +	struct tad_pmu *pmu = platform_get_drvdata(pdev);
> +
> +	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
> +						&pmu->node);
> +	perf_pmu_unregister(&pmu->pmu);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id tad_pmu_of_match[] = {
> +	{ .compatible = "marvell,cn10k-tad-pmu", },
> +	{},
> +};
> +
> +static struct platform_driver tad_pmu_driver = {
> +	.driver         = {
> +		.name   = "cn10k_tad_pmu",
> +		.of_match_table = of_match_ptr(tad_pmu_of_match),
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe          = tad_pmu_probe,
> +	.remove         = tad_pmu_remove,
> +};
> +
> +static int tad_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> +{
> +	struct tad_pmu *pmu = hlist_entry_safe(node, struct tad_pmu, node);
> +	unsigned int target;
> +
> +	if (cpu != pmu->cpu)
> +		return 0;
> +
> +	target = cpumask_any_but(cpu_online_mask, cpu);
> +	if (target >= nr_cpu_ids)
> +		return 0;
> +
> +	perf_pmu_migrate_context(&pmu->pmu, cpu, target);
> +	pmu->cpu = target;
> +
> +	return 0;
> +}
> +
> +static int __init tad_pmu_init(void)
> +{
> +	int ret;
> +
> +	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
> +				      "perf/cn10k/tadpmu:online",
> +				      NULL,
> +				      tad_pmu_offline_cpu);

> +	if (ret < 0)
> +		return ret;
> +	tad_pmu_cpuhp_state = ret;
> +	return platform_driver_register(&tad_pmu_driver);
> +}
> +
> +static void __exit tad_pmu_exit(void)
> +{
> +	platform_driver_unregister(&tad_pmu_driver);
> +	cpuhp_remove_multi_state(tad_pmu_cpuhp_state);
> +}
> +
> +module_init(tad_pmu_init);
> +module_exit(tad_pmu_exit);
> +
> +MODULE_DESCRIPTION("Marvell CN10K LLC-TAD Perf driver");
> +MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@marvell.com>");
> +MODULE_LICENSE("GPL v2");
> 

Re: [PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support

[kajoljain]

On 8/12/21 11:12 PM, Bhaskara Budiredla wrote:
> This driver adds support for Last-level cache tag-and-data unit
> (LLC-TAD) PMU that is featured in some of the Marvell's CN10K
> infrastructure silicons.
> 
> The LLC is divided into 2N slices distributed across N Mesh tiles
> in a single-socket configuration. The driver always configures the
> same counter for all of the TADs. The user would end up effectively
> reserving one of eight counters in every TAD to look across all TADs.
> The occurrences of events are aggregated and presented to the user
> at the end of an application run. The driver does not provide a way
> for the user to partition TADs so that different TADs are used for
> different applications.
> 
> The event counters are zeroed on start event counting to avoid any
> rollover issues. TAD perf counters are 64-bit, so it's not currently
> possible to overflow event counters at current mesh and core
> frequencies.
> 
> To measure tad pmu events use perf tool stat command. For instance:
> 
> perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application>
> perf stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application>
> 
> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
> ---
>  drivers/perf/Kconfig                 |   7 +
>  drivers/perf/Makefile                |   1 +
>  drivers/perf/marvell_cn10k_tad_pmu.c | 429 +++++++++++++++++++++++++++
>  3 files changed, 437 insertions(+)
>  create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c
> 
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 77522e5efe11..73dca11f8080 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -137,6 +137,13 @@ config ARM_DMC620_PMU
>  	  Support for PMU events monitoring on the ARM DMC-620 memory
>  	  controller.
>  
> +config MARVELL_CN10K_TAD_PMU
> +	tristate "Marvell CN10K LLC-TAD PMU"
> +	depends on ARM64
> +	help
> +	  Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
> +	  performance monitors on CN10K family silicons.
> +
>  source "drivers/perf/hisilicon/Kconfig"
>  
>  endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 5260b116c7da..2db5418d5b0a 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
>  obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
>  obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
>  obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
> +obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
> diff --git a/drivers/perf/marvell_cn10k_tad_pmu.c b/drivers/perf/marvell_cn10k_tad_pmu.c
> new file mode 100644
> index 000000000000..fec8b90d52d2
> --- /dev/null
> +++ b/drivers/perf/marvell_cn10k_tad_pmu.c
> @@ -0,0 +1,429 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Marvell CN10K LLC-TAD perf driver
> + *
> + * Copyright (C) 2021 Marvell.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) "tad_pmu: " fmt
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/cpuhotplug.h>
> +#include <linux/perf_event.h>
> +#include <linux/platform_device.h>
> +#include <linux/arm-smccc.h>
> +
> +#define TAD_PFC_OFFSET		0x0800
> +#define TAD_PFC(counter)	(TAD_PFC_OFFSET | (counter << 3))
> +#define TAD_PRF_OFFSET		0x0900
> +#define TAD_PRF(counter)	(TAD_PRF_OFFSET | (counter << 3))
> +#define TAD_PRF_CNTSEL_MASK	0xFF
> +#define TAD_MAX_COUNTERS	8
> +
> +#define to_tad_pmu(p) (container_of(p, struct tad_pmu, pmu))
> +
> +struct tad_region {
> +	void __iomem	*base;
> +};
> +
> +struct tad_pmu {
> +	struct pmu pmu;
> +	struct tad_region *regions;
> +	u32 region_cnt;
> +	unsigned int cpu;
> +	struct hlist_node node;
> +	struct perf_event *events[TAD_MAX_COUNTERS];
> +	DECLARE_BITMAP(counters_map, TAD_MAX_COUNTERS);
> +};
> +
> +static int tad_pmu_cpuhp_state;
> +
> +static void tad_pmu_event_counter_read(struct perf_event *event)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	u32 counter_idx = hwc->idx;
> +	u64 delta, prev, new;
> +	int i;
> +
> +	do {
> +		prev = local64_read(&hwc->prev_count);
> +		for (i = 0, new = 0; i < tad_pmu->region_cnt; i++)
> +			new += readq(tad_pmu->regions[i].base +
> +				     TAD_PFC(counter_idx));
> +	} while (local64_cmpxchg(&hwc->prev_count, prev, new) != prev);
> +
> +	delta = (new - prev) & GENMASK_ULL(63, 0);
> +	local64_add(delta, &event->count);
> +}
> +
> +static void tad_pmu_event_counter_stop(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	u32 counter_idx = hwc->idx;
> +	int i;
> +
> +	/* TAD()_PFC() stop counting on the write
> +	 * which sets TAD()_PRF()[CNTSEL] == 0
> +	 */
> +	for (i = 0; i < tad_pmu->region_cnt; i++)
> +		writeq_relaxed(0, tad_pmu->regions[i].base +
> +			       TAD_PRF(counter_idx));
> +
> +	tad_pmu_event_counter_read(event);
> +	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
> +}
> +
> +static void tad_pmu_event_counter_start(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	u32 event_idx = event->attr.config;
> +	u32 counter_idx = hwc->idx;
> +	u64 reg_val;
> +	int i;
> +
> +	hwc->state = 0;
> +
> +	/* Typically TAD_PFC() are zeroed to start counting */
> +	for (i = 0; i < tad_pmu->region_cnt; i++)
> +		writeq_relaxed(0, tad_pmu->regions[i].base +
> +			       TAD_PFC(counter_idx));
> +
> +	/* TAD()_PFC() start counting on the write
> +	 * which sets TAD()_PRF()[CNTSEL] != 0
> +	 */
> +	for (i = 0; i < tad_pmu->region_cnt; i++) {
> +		reg_val = readq_relaxed(tad_pmu->regions[i].base +
> +					TAD_PRF(counter_idx));
> +		reg_val |= (event_idx & 0xFF);
> +		writeq_relaxed(reg_val,	tad_pmu->regions[i].base +
> +			       TAD_PRF(counter_idx));
> +	}
> +}
> +
> +static void tad_pmu_event_counter_del(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	int idx = hwc->idx;
> +
> +	tad_pmu_event_counter_stop(event, flags | PERF_EF_UPDATE);
> +	tad_pmu->events[idx] = NULL;
> +	clear_bit(idx, tad_pmu->counters_map);
> +}
> +
> +static int tad_pmu_event_counter_add(struct perf_event *event, int flags)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +	struct hw_perf_event *hwc = &event->hw;
> +	int idx;
> +
> +	/* Get a free counter for this event */
> +	idx = find_first_zero_bit(tad_pmu->counters_map, TAD_MAX_COUNTERS);
> +	if (idx == TAD_MAX_COUNTERS)
> +		return -EAGAIN;
> +
> +	set_bit(idx, tad_pmu->counters_map);
> +
> +	hwc->idx = idx;
> +	hwc->state = PERF_HES_STOPPED;
> +	tad_pmu->events[idx] = event;
> +
> +	if (flags & PERF_EF_START)
> +		tad_pmu_event_counter_start(event, flags);
> +
> +	return 0;
> +}
> +
> +static int tad_pmu_event_init(struct perf_event *event)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
> +
> +	if (!event->attr.disabled)
> +		return -EINVAL;
> +
> +	if (event->attr.type != event->pmu->type)
> +		return -ENOENT;
> +
> +	if (event->state != PERF_EVENT_STATE_OFF)
> +		return -EINVAL;
> +
> +	event->cpu = tad_pmu->cpu;
> +	event->hw.idx = -1;
> +	event->hw.config_base = event->attr.config;
> +
> +	return 0;
> +}
> +
> +static ssize_t tad_pmu_event_show(struct device *dev,
> +				struct device_attribute *attr, char *page)
> +{
> +	struct perf_pmu_events_attr *pmu_attr;
> +
> +	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
> +	return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
> +}
> +
> +#define TAD_PMU_EVENT_ATTR(name, config)			\
> +	PMU_EVENT_ATTR_ID(name, tad_pmu_event_show, config)
> +
> +static struct attribute *tad_pmu_event_attrs[] = {
> +	TAD_PMU_EVENT_ATTR(tad_none, 0x0),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_any, 0x1),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_mn, 0x2),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_exlmn, 0x3),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_any, 0x4),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_mn, 0x5),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_exlmn, 0x6),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_dss, 0x7),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_retry_dss, 0x8),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_any, 0x9),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_dss, 0xa),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_any, 0xb),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_rd, 0xc),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_wr, 0xd),
> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_evict, 0xe),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_any, 0xf),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_exlmn, 0x10),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_mn, 0x11),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_exlmn, 0x12),
> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_mn, 0x13),
> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_any, 0x14),
> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_mn, 0x15),
> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_exlmn, 0x16),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_any, 0x17),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_fill, 0x18),
> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_dss, 0x19),
> +	TAD_PMU_EVENT_ATTR(tad_alloc_dtg, 0x1a),
> +	TAD_PMU_EVENT_ATTR(tad_alloc_ltg, 0x1b),
> +	TAD_PMU_EVENT_ATTR(tad_alloc_any, 0x1c),
> +	TAD_PMU_EVENT_ATTR(tad_hit_dtg, 0x1d),
> +	TAD_PMU_EVENT_ATTR(tad_hit_ltg, 0x1e),
> +	TAD_PMU_EVENT_ATTR(tad_hit_any, 0x1f),
> +	TAD_PMU_EVENT_ATTR(tad_tag_rd, 0x20),
> +	TAD_PMU_EVENT_ATTR(tad_dat_rd, 0x21),
> +	TAD_PMU_EVENT_ATTR(tad_dat_rd_byp, 0x22),
> +	TAD_PMU_EVENT_ATTR(tad_ifb_occ, 0x23),
> +	TAD_PMU_EVENT_ATTR(tad_req_occ, 0x24),
> +	NULL,
> +};
> +
> +static const struct attribute_group tad_pmu_events_attr_group = {
> +	.name = "events",
> +	.attrs = tad_pmu_event_attrs,
> +};
> +
> +PMU_FORMAT_ATTR(event, "config:0-7");
> +
> +static struct attribute *tad_pmu_format_attrs[] = {
> +	&format_attr_event.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group tad_pmu_format_attr_group = {
> +	.name = "format",
> +	.attrs = tad_pmu_format_attrs,
> +};
> +
> +static ssize_t tad_pmu_cpumask_show(struct device *dev,
> +				struct device_attribute *attr, char *buf)
> +{
> +	struct tad_pmu *tad_pmu = to_tad_pmu(dev_get_drvdata(dev));
> +
> +	return cpumap_print_to_pagebuf(true, buf, cpumask_of(tad_pmu->cpu));
> +}
> +
> +static DEVICE_ATTR(cpumask, 0444, tad_pmu_cpumask_show, NULL);
> +
> +static struct attribute *tad_pmu_cpumask_attrs[] = {
> +	&dev_attr_cpumask.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group tad_pmu_cpumask_attr_group = {
> +	.attrs = tad_pmu_cpumask_attrs,
> +};
> +
> +static const struct attribute_group *tad_pmu_attr_groups[] = {
> +	&tad_pmu_events_attr_group,
> +	&tad_pmu_format_attr_group,
> +	&tad_pmu_cpumask_attr_group,
> +	NULL,
> +};
> +
> +static int tad_pmu_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct tad_region *regions;
> +	struct tad_pmu *tad_pmu;
> +	struct resource *res;
> +	u32 tad_pmu_page_size;
> +	u32 tad_page_size;
> +	u32 tad_cnt;
> +	int i, ret;
> +	char *name;
> +
> +	tad_pmu = devm_kzalloc(&pdev->dev, sizeof(*tad_pmu), GFP_KERNEL);
> +	if (!tad_pmu)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, tad_pmu);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "Mem resource not found\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = of_property_read_u32(node, "tad-page-size", &tad_page_size);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't find tad-page-size property\n");
> +		return ret;
> +	}
> +
> +	ret = of_property_read_u32(node, "tad-pmu-page-size",
> +				   &tad_pmu_page_size);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't find tad-pmu-page-size property\n");
> +		return ret;
> +	}
> +
> +	ret = of_property_read_u32(node, "tad-cnt", &tad_cnt);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Can't find tad-cnt property\n");
> +		return ret;
> +	}
> +
> +	regions = devm_kcalloc(&pdev->dev, tad_cnt,
> +			       sizeof(*regions), GFP_KERNEL);
> +	if (!regions)
> +		return -ENOMEM;
> +
> +	/* ioremap the distributed TAD pmu regions */
> +	for (i = 0; i < tad_cnt && res->start < res->end; i++) {
> +		regions[i].base = devm_ioremap(&pdev->dev,
> +					       res->start,
> +					       tad_pmu_page_size);
> +		if (IS_ERR(regions[i].base)) {
> +			dev_err(&pdev->dev, "TAD%d ioremap fail\n", i);
> +			return -ENOMEM;
> +		}
> +		res->start += tad_page_size;
> +	}
> +
> +	tad_pmu->regions = regions;
> +	tad_pmu->region_cnt = tad_cnt;
> +
> +	tad_pmu->pmu = (struct pmu) {
> +
> +		.module		= THIS_MODULE,
> +		.attr_groups	= tad_pmu_attr_groups,
> +		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE |
> +				  PERF_PMU_CAP_NO_INTERRUPT,
> +		.task_ctx_nr	= perf_invalid_context,
> +
> +		.event_init	= tad_pmu_event_init,
> +		.add		= tad_pmu_event_counter_add,
> +		.del		= tad_pmu_event_counter_del,
> +		.start		= tad_pmu_event_counter_start,
> +		.stop		= tad_pmu_event_counter_stop,
> +		.read		= tad_pmu_event_counter_read,
> +	};
> +
> +	tad_pmu->cpu = raw_smp_processor_id();
> +

Hi Bhaskara, 
   I think there is some memory leaks in this function. Incase cpuotplug
code fails, don't we need to free momory allocated to `tad_pmu`?

Thanks,
Kajol Jain


> +	/* Register pmu instance for cpu hotplug */
> +	ret = cpuhp_state_add_instance_nocalls(tad_pmu_cpuhp_state,
> +					       &tad_pmu->node);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
> +		return ret;
> +	}
> +
> +	name = "tad";
> +	ret = perf_pmu_register(&tad_pmu->pmu, name, -1);
> +	if (ret)
> +		cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
> +						    &tad_pmu->node);
> +
> +	return ret;
> +}
> +
> +static int tad_pmu_remove(struct platform_device *pdev)
> +{
> +	struct tad_pmu *pmu = platform_get_drvdata(pdev);
> +
> +	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
> +						&pmu->node);
> +	perf_pmu_unregister(&pmu->pmu);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id tad_pmu_of_match[] = {
> +	{ .compatible = "marvell,cn10k-tad-pmu", },
> +	{},
> +};
> +
> +static struct platform_driver tad_pmu_driver = {
> +	.driver         = {
> +		.name   = "cn10k_tad_pmu",
> +		.of_match_table = of_match_ptr(tad_pmu_of_match),
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe          = tad_pmu_probe,
> +	.remove         = tad_pmu_remove,
> +};
> +
> +static int tad_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> +{
> +	struct tad_pmu *pmu = hlist_entry_safe(node, struct tad_pmu, node);
> +	unsigned int target;
> +
> +	if (cpu != pmu->cpu)
> +		return 0;
> +
> +	target = cpumask_any_but(cpu_online_mask, cpu);
> +	if (target >= nr_cpu_ids)
> +		return 0;
> +
> +	perf_pmu_migrate_context(&pmu->pmu, cpu, target);
> +	pmu->cpu = target;
> +
> +	return 0;
> +}
> +
> +static int __init tad_pmu_init(void)
> +{
> +	int ret;
> +
> +	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
> +				      "perf/cn10k/tadpmu:online",
> +				      NULL,
> +				      tad_pmu_offline_cpu);

> +	if (ret < 0)
> +		return ret;
> +	tad_pmu_cpuhp_state = ret;
> +	return platform_driver_register(&tad_pmu_driver);
> +}
> +
> +static void __exit tad_pmu_exit(void)
> +{
> +	platform_driver_unregister(&tad_pmu_driver);
> +	cpuhp_remove_multi_state(tad_pmu_cpuhp_state);
> +}
> +
> +module_init(tad_pmu_init);
> +module_exit(tad_pmu_exit);
> +
> +MODULE_DESCRIPTION("Marvell CN10K LLC-TAD Perf driver");
> +MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@marvell.com>");
> +MODULE_LICENSE("GPL v2");
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [EXT] Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Bhaskara Budiredla]

Hi Rob,

Thanks for the steps. I seeing minimum version error, though the dtschema is latest.

$ make dt_binding_check
sort: -:2: disorder: 0
ERROR: dtschema minimum version is v2021.2.1
Documentation/devicetree/bindings/Makefile:12: recipe for target 'check_dtschema_version' failed
make[1]: *** [check_dtschema_version] Error 1
Makefile:1418: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

$ pip3 show dtschema
Name: dtschema
Version: 2021.7
Summary: DeviceTree validation schema and tools
Home-page: https://github.com/devicetree-org/dt-schema
Author: Rob Herring
Author-email: robh@kernel.org
License: BSD

Thanks,
Bhaskara

>-----Original Message-----
>From: Rob Herring <robh@kernel.org>
>Sent: Friday, August 13, 2021 5:41 PM
>To: Bhaskara Budiredla <bbudiredla@marvell.com>
>Cc: will@kernel.org; linux-arm-kernel@lists.infradead.org;
>mark.rutland@arm.com; Sunil Kovvuri Goutham <sgoutham@marvell.com>;
>devicetree@vger.kernel.org; robh+dt@kernel.org; linux-
>kernel@vger.kernel.org
>Subject: [EXT] Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for
>Marvell CN10K LLC-TAD pmu bindings
>
>External Email
>
>----------------------------------------------------------------------
>On Thu, 12 Aug 2021 23:12:09 +0530, Bhaskara Budiredla wrote:
>> Add device tree bindings for Last-level-cache Tag-and-data
>> (LLC-TAD) unit PMU for Marvell CN10K SoCs.
>>
>> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
>> ---
>>  .../bindings/perf/marvell-cn10k-tad.yaml      | 45 +++++++++++++++++++
>>  1 file changed, 45 insertions(+)
>>  create mode 100644
>> Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
>>
>
>My bot found errors running 'make DT_CHECKER_FLAGS=-m
>dt_binding_check'
>on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
>yamllint warnings/errors:
>
>dtschema/dtc warnings/errors:
>Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dts:19.32-25.11: Warning (unit_address_format): /example-
>0/tad_pmu@0x87e280000000: unit name should not have leading "0x"
>/builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dt.yaml: example-0: tad_pmu@0x87e280000000:reg:0: [34786,
>2147483648, 0, 4096] is too long
>	From schema: /usr/local/lib/python3.8/dist-
>packages/dtschema/schemas/reg.yaml
>/builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dt.yaml: example-0: 'tad_pmu@0x87e280000000' does not
>match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-
>9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-
>._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
>	From schema: /usr/local/lib/python3.8/dist-
>packages/dtschema/schemas/dt-core.yaml
>/builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dt.yaml: tad_pmu@0x87e280000000: 'tad-cnt', 'tad-page-size',
>'tad-pmu-page-size' do not match any of the regexes: 'pinctrl-[0-9]+'
>	From schema: /builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
>
>doc reference errors (make refcheckdocs):
>
>See https://urldefense.proofpoint.com/v2/url?u=https-
>3A__patchwork.ozlabs.org_patch_1516395&d=DwIBAg&c=nKjWec2b6R0mOy
>Paz7xtfQ&r=9P_lSljSO7KnQNkCGsgu9x_Op4mstSdqWN3Olr4bUv0&m=Kqfvr5E
>wn5St-
>WmEqTDaMI6uM6H5x0uiuOxZTYd15Gc&s=NYt8Ae1pxJhBgLN5asKagq1BUQi_
>gqK_RBkBSmcCvAU&e=
>
>This check can fail if there are any dependencies. The base for a patch series is
>generally the most recent rc1.
>
>If you already ran 'make dt_binding_check' and didn't see the above error(s),
>then make sure 'yamllint' is installed and dt-schema is up to
>date:
>
>pip3 install dtschema --upgrade
>
>Please check and re-submit.

RE: [EXT] Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Bhaskara Budiredla]

Hi Rob,

Thanks for the steps. I seeing minimum version error, though the dtschema is latest.

$ make dt_binding_check
sort: -:2: disorder: 0
ERROR: dtschema minimum version is v2021.2.1
Documentation/devicetree/bindings/Makefile:12: recipe for target 'check_dtschema_version' failed
make[1]: *** [check_dtschema_version] Error 1
Makefile:1418: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

$ pip3 show dtschema
Name: dtschema
Version: 2021.7
Summary: DeviceTree validation schema and tools
Home-page: https://github.com/devicetree-org/dt-schema
Author: Rob Herring
Author-email: robh@kernel.org
License: BSD

Thanks,
Bhaskara

>-----Original Message-----
>From: Rob Herring <robh@kernel.org>
>Sent: Friday, August 13, 2021 5:41 PM
>To: Bhaskara Budiredla <bbudiredla@marvell.com>
>Cc: will@kernel.org; linux-arm-kernel@lists.infradead.org;
>mark.rutland@arm.com; Sunil Kovvuri Goutham <sgoutham@marvell.com>;
>devicetree@vger.kernel.org; robh+dt@kernel.org; linux-
>kernel@vger.kernel.org
>Subject: [EXT] Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for
>Marvell CN10K LLC-TAD pmu bindings
>
>External Email
>
>----------------------------------------------------------------------
>On Thu, 12 Aug 2021 23:12:09 +0530, Bhaskara Budiredla wrote:
>> Add device tree bindings for Last-level-cache Tag-and-data
>> (LLC-TAD) unit PMU for Marvell CN10K SoCs.
>>
>> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
>> ---
>>  .../bindings/perf/marvell-cn10k-tad.yaml      | 45 +++++++++++++++++++
>>  1 file changed, 45 insertions(+)
>>  create mode 100644
>> Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
>>
>
>My bot found errors running 'make DT_CHECKER_FLAGS=-m
>dt_binding_check'
>on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
>yamllint warnings/errors:
>
>dtschema/dtc warnings/errors:
>Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dts:19.32-25.11: Warning (unit_address_format): /example-
>0/tad_pmu@0x87e280000000: unit name should not have leading "0x"
>/builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dt.yaml: example-0: tad_pmu@0x87e280000000:reg:0: [34786,
>2147483648, 0, 4096] is too long
>	From schema: /usr/local/lib/python3.8/dist-
>packages/dtschema/schemas/reg.yaml
>/builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dt.yaml: example-0: 'tad_pmu@0x87e280000000' does not
>match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-
>9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-
>._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
>	From schema: /usr/local/lib/python3.8/dist-
>packages/dtschema/schemas/dt-core.yaml
>/builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-
>tad.example.dt.yaml: tad_pmu@0x87e280000000: 'tad-cnt', 'tad-page-size',
>'tad-pmu-page-size' do not match any of the regexes: 'pinctrl-[0-9]+'
>	From schema: /builds/robherring/linux-dt-
>review/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
>
>doc reference errors (make refcheckdocs):
>
>See https://urldefense.proofpoint.com/v2/url?u=https-
>3A__patchwork.ozlabs.org_patch_1516395&d=DwIBAg&c=nKjWec2b6R0mOy
>Paz7xtfQ&r=9P_lSljSO7KnQNkCGsgu9x_Op4mstSdqWN3Olr4bUv0&m=Kqfvr5E
>wn5St-
>WmEqTDaMI6uM6H5x0uiuOxZTYd15Gc&s=NYt8Ae1pxJhBgLN5asKagq1BUQi_
>gqK_RBkBSmcCvAU&e=
>
>This check can fail if there are any dependencies. The base for a patch series is
>generally the most recent rc1.
>
>If you already ran 'make dt_binding_check' and didn't see the above error(s),
>then make sure 'yamllint' is installed and dt-schema is up to
>date:
>
>pip3 install dtschema --upgrade
>
>Please check and re-submit.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [EXT] Re: [PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support

[Bhaskara Budiredla]

Thanks Kajol for pointing to memory leak.
I will fix it in the next version.

Thanks,
Bhaskara

>-----Original Message-----
>From: kajoljain <kjain@linux.ibm.com>
>Sent: Saturday, August 14, 2021 7:24 PM
>To: Bhaskara Budiredla <bbudiredla@marvell.com>; will@kernel.org;
>mark.rutland@arm.com; robh+dt@kernel.org; Sunil Kovvuri Goutham
><sgoutham@marvell.com>
>Cc: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-
>kernel@vger.kernel.org
>Subject: [EXT] Re: [PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support
>
>External Email
>
>----------------------------------------------------------------------
>
>
>On 8/12/21 11:12 PM, Bhaskara Budiredla wrote:
>> This driver adds support for Last-level cache tag-and-data unit
>> (LLC-TAD) PMU that is featured in some of the Marvell's CN10K
>> infrastructure silicons.
>>
>> The LLC is divided into 2N slices distributed across N Mesh tiles in a
>> single-socket configuration. The driver always configures the same
>> counter for all of the TADs. The user would end up effectively
>> reserving one of eight counters in every TAD to look across all TADs.
>> The occurrences of events are aggregated and presented to the user at
>> the end of an application run. The driver does not provide a way for
>> the user to partition TADs so that different TADs are used for
>> different applications.
>>
>> The event counters are zeroed on start event counting to avoid any
>> rollover issues. TAD perf counters are 64-bit, so it's not currently
>> possible to overflow event counters at current mesh and core
>> frequencies.
>>
>> To measure tad pmu events use perf tool stat command. For instance:
>>
>> perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application> perf
>> stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application>
>>
>> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
>> ---
>>  drivers/perf/Kconfig                 |   7 +
>>  drivers/perf/Makefile                |   1 +
>>  drivers/perf/marvell_cn10k_tad_pmu.c | 429
>> +++++++++++++++++++++++++++
>>  3 files changed, 437 insertions(+)
>>  create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c
>>
>> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index
>> 77522e5efe11..73dca11f8080 100644
>> --- a/drivers/perf/Kconfig
>> +++ b/drivers/perf/Kconfig
>> @@ -137,6 +137,13 @@ config ARM_DMC620_PMU
>>  	  Support for PMU events monitoring on the ARM DMC-620 memory
>>  	  controller.
>>
>> +config MARVELL_CN10K_TAD_PMU
>> +	tristate "Marvell CN10K LLC-TAD PMU"
>> +	depends on ARM64
>> +	help
>> +	  Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
>> +	  performance monitors on CN10K family silicons.
>> +
>>  source "drivers/perf/hisilicon/Kconfig"
>>
>>  endmenu
>> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile index
>> 5260b116c7da..2db5418d5b0a 100644
>> --- a/drivers/perf/Makefile
>> +++ b/drivers/perf/Makefile
>> @@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) +=
>thunderx2_pmu.o
>>  obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
>>  obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
>>  obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
>> +obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
>> diff --git a/drivers/perf/marvell_cn10k_tad_pmu.c
>> b/drivers/perf/marvell_cn10k_tad_pmu.c
>> new file mode 100644
>> index 000000000000..fec8b90d52d2
>> --- /dev/null
>> +++ b/drivers/perf/marvell_cn10k_tad_pmu.c
>> @@ -0,0 +1,429 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* Marvell CN10K LLC-TAD perf driver
>> + *
>> + * Copyright (C) 2021 Marvell.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> +modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#define pr_fmt(fmt) "tad_pmu: " fmt
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/cpuhotplug.h>
>> +#include <linux/perf_event.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/arm-smccc.h>
>> +
>> +#define TAD_PFC_OFFSET		0x0800
>> +#define TAD_PFC(counter)	(TAD_PFC_OFFSET | (counter << 3))
>> +#define TAD_PRF_OFFSET		0x0900
>> +#define TAD_PRF(counter)	(TAD_PRF_OFFSET | (counter << 3))
>> +#define TAD_PRF_CNTSEL_MASK	0xFF
>> +#define TAD_MAX_COUNTERS	8
>> +
>> +#define to_tad_pmu(p) (container_of(p, struct tad_pmu, pmu))
>> +
>> +struct tad_region {
>> +	void __iomem	*base;
>> +};
>> +
>> +struct tad_pmu {
>> +	struct pmu pmu;
>> +	struct tad_region *regions;
>> +	u32 region_cnt;
>> +	unsigned int cpu;
>> +	struct hlist_node node;
>> +	struct perf_event *events[TAD_MAX_COUNTERS];
>> +	DECLARE_BITMAP(counters_map, TAD_MAX_COUNTERS); };
>> +
>> +static int tad_pmu_cpuhp_state;
>> +
>> +static void tad_pmu_event_counter_read(struct perf_event *event) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	u32 counter_idx = hwc->idx;
>> +	u64 delta, prev, new;
>> +	int i;
>> +
>> +	do {
>> +		prev = local64_read(&hwc->prev_count);
>> +		for (i = 0, new = 0; i < tad_pmu->region_cnt; i++)
>> +			new += readq(tad_pmu->regions[i].base +
>> +				     TAD_PFC(counter_idx));
>> +	} while (local64_cmpxchg(&hwc->prev_count, prev, new) != prev);
>> +
>> +	delta = (new - prev) & GENMASK_ULL(63, 0);
>> +	local64_add(delta, &event->count);
>> +}
>> +
>> +static void tad_pmu_event_counter_stop(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	u32 counter_idx = hwc->idx;
>> +	int i;
>> +
>> +	/* TAD()_PFC() stop counting on the write
>> +	 * which sets TAD()_PRF()[CNTSEL] == 0
>> +	 */
>> +	for (i = 0; i < tad_pmu->region_cnt; i++)
>> +		writeq_relaxed(0, tad_pmu->regions[i].base +
>> +			       TAD_PRF(counter_idx));
>> +
>> +	tad_pmu_event_counter_read(event);
>> +	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; }
>> +
>> +static void tad_pmu_event_counter_start(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	u32 event_idx = event->attr.config;
>> +	u32 counter_idx = hwc->idx;
>> +	u64 reg_val;
>> +	int i;
>> +
>> +	hwc->state = 0;
>> +
>> +	/* Typically TAD_PFC() are zeroed to start counting */
>> +	for (i = 0; i < tad_pmu->region_cnt; i++)
>> +		writeq_relaxed(0, tad_pmu->regions[i].base +
>> +			       TAD_PFC(counter_idx));
>> +
>> +	/* TAD()_PFC() start counting on the write
>> +	 * which sets TAD()_PRF()[CNTSEL] != 0
>> +	 */
>> +	for (i = 0; i < tad_pmu->region_cnt; i++) {
>> +		reg_val = readq_relaxed(tad_pmu->regions[i].base +
>> +					TAD_PRF(counter_idx));
>> +		reg_val |= (event_idx & 0xFF);
>> +		writeq_relaxed(reg_val,	tad_pmu->regions[i].base +
>> +			       TAD_PRF(counter_idx));
>> +	}
>> +}
>> +
>> +static void tad_pmu_event_counter_del(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	int idx = hwc->idx;
>> +
>> +	tad_pmu_event_counter_stop(event, flags | PERF_EF_UPDATE);
>> +	tad_pmu->events[idx] = NULL;
>> +	clear_bit(idx, tad_pmu->counters_map); }
>> +
>> +static int tad_pmu_event_counter_add(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	int idx;
>> +
>> +	/* Get a free counter for this event */
>> +	idx = find_first_zero_bit(tad_pmu->counters_map,
>TAD_MAX_COUNTERS);
>> +	if (idx == TAD_MAX_COUNTERS)
>> +		return -EAGAIN;
>> +
>> +	set_bit(idx, tad_pmu->counters_map);
>> +
>> +	hwc->idx = idx;
>> +	hwc->state = PERF_HES_STOPPED;
>> +	tad_pmu->events[idx] = event;
>> +
>> +	if (flags & PERF_EF_START)
>> +		tad_pmu_event_counter_start(event, flags);
>> +
>> +	return 0;
>> +}
>> +
>> +static int tad_pmu_event_init(struct perf_event *event) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +
>> +	if (!event->attr.disabled)
>> +		return -EINVAL;
>> +
>> +	if (event->attr.type != event->pmu->type)
>> +		return -ENOENT;
>> +
>> +	if (event->state != PERF_EVENT_STATE_OFF)
>> +		return -EINVAL;
>> +
>> +	event->cpu = tad_pmu->cpu;
>> +	event->hw.idx = -1;
>> +	event->hw.config_base = event->attr.config;
>> +
>> +	return 0;
>> +}
>> +
>> +static ssize_t tad_pmu_event_show(struct device *dev,
>> +				struct device_attribute *attr, char *page) {
>> +	struct perf_pmu_events_attr *pmu_attr;
>> +
>> +	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
>> +	return sprintf(page, "event=0x%02llx\n", pmu_attr->id); }
>> +
>> +#define TAD_PMU_EVENT_ATTR(name, config)			\
>> +	PMU_EVENT_ATTR_ID(name, tad_pmu_event_show, config)
>> +
>> +static struct attribute *tad_pmu_event_attrs[] = {
>> +	TAD_PMU_EVENT_ATTR(tad_none, 0x0),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_any, 0x1),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_mn, 0x2),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_exlmn, 0x3),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_any, 0x4),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_mn, 0x5),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_exlmn, 0x6),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_dss, 0x7),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_retry_dss, 0x8),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_any, 0x9),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_dss, 0xa),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_any, 0xb),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_rd, 0xc),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_wr, 0xd),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_evict, 0xe),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_any, 0xf),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_exlmn, 0x10),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_mn, 0x11),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_exlmn, 0x12),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_mn, 0x13),
>> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_any, 0x14),
>> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_mn, 0x15),
>> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_exlmn, 0x16),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_any, 0x17),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_fill, 0x18),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_dss, 0x19),
>> +	TAD_PMU_EVENT_ATTR(tad_alloc_dtg, 0x1a),
>> +	TAD_PMU_EVENT_ATTR(tad_alloc_ltg, 0x1b),
>> +	TAD_PMU_EVENT_ATTR(tad_alloc_any, 0x1c),
>> +	TAD_PMU_EVENT_ATTR(tad_hit_dtg, 0x1d),
>> +	TAD_PMU_EVENT_ATTR(tad_hit_ltg, 0x1e),
>> +	TAD_PMU_EVENT_ATTR(tad_hit_any, 0x1f),
>> +	TAD_PMU_EVENT_ATTR(tad_tag_rd, 0x20),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_rd, 0x21),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_rd_byp, 0x22),
>> +	TAD_PMU_EVENT_ATTR(tad_ifb_occ, 0x23),
>> +	TAD_PMU_EVENT_ATTR(tad_req_occ, 0x24),
>> +	NULL,
>> +};
>> +
>> +static const struct attribute_group tad_pmu_events_attr_group = {
>> +	.name = "events",
>> +	.attrs = tad_pmu_event_attrs,
>> +};
>> +
>> +PMU_FORMAT_ATTR(event, "config:0-7");
>> +
>> +static struct attribute *tad_pmu_format_attrs[] = {
>> +	&format_attr_event.attr,
>> +	NULL,
>> +};
>> +
>> +static struct attribute_group tad_pmu_format_attr_group = {
>> +	.name = "format",
>> +	.attrs = tad_pmu_format_attrs,
>> +};
>> +
>> +static ssize_t tad_pmu_cpumask_show(struct device *dev,
>> +				struct device_attribute *attr, char *buf) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(dev_get_drvdata(dev));
>> +
>> +	return cpumap_print_to_pagebuf(true, buf, cpumask_of(tad_pmu-
>>cpu));
>> +}
>> +
>> +static DEVICE_ATTR(cpumask, 0444, tad_pmu_cpumask_show, NULL);
>> +
>> +static struct attribute *tad_pmu_cpumask_attrs[] = {
>> +	&dev_attr_cpumask.attr,
>> +	NULL,
>> +};
>> +
>> +static struct attribute_group tad_pmu_cpumask_attr_group = {
>> +	.attrs = tad_pmu_cpumask_attrs,
>> +};
>> +
>> +static const struct attribute_group *tad_pmu_attr_groups[] = {
>> +	&tad_pmu_events_attr_group,
>> +	&tad_pmu_format_attr_group,
>> +	&tad_pmu_cpumask_attr_group,
>> +	NULL,
>> +};
>> +
>> +static int tad_pmu_probe(struct platform_device *pdev) {
>> +	struct device_node *node = pdev->dev.of_node;
>> +	struct tad_region *regions;
>> +	struct tad_pmu *tad_pmu;
>> +	struct resource *res;
>> +	u32 tad_pmu_page_size;
>> +	u32 tad_page_size;
>> +	u32 tad_cnt;
>> +	int i, ret;
>> +	char *name;
>> +
>> +	tad_pmu = devm_kzalloc(&pdev->dev, sizeof(*tad_pmu),
>GFP_KERNEL);
>> +	if (!tad_pmu)
>> +		return -ENOMEM;
>> +
>> +	platform_set_drvdata(pdev, tad_pmu);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	if (!res) {
>> +		dev_err(&pdev->dev, "Mem resource not found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	ret = of_property_read_u32(node, "tad-page-size", &tad_page_size);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Can't find tad-page-size property\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = of_property_read_u32(node, "tad-pmu-page-size",
>> +				   &tad_pmu_page_size);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Can't find tad-pmu-page-size
>property\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = of_property_read_u32(node, "tad-cnt", &tad_cnt);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Can't find tad-cnt property\n");
>> +		return ret;
>> +	}
>> +
>> +	regions = devm_kcalloc(&pdev->dev, tad_cnt,
>> +			       sizeof(*regions), GFP_KERNEL);
>> +	if (!regions)
>> +		return -ENOMEM;
>> +
>> +	/* ioremap the distributed TAD pmu regions */
>> +	for (i = 0; i < tad_cnt && res->start < res->end; i++) {
>> +		regions[i].base = devm_ioremap(&pdev->dev,
>> +					       res->start,
>> +					       tad_pmu_page_size);
>> +		if (IS_ERR(regions[i].base)) {
>> +			dev_err(&pdev->dev, "TAD%d ioremap fail\n", i);
>> +			return -ENOMEM;
>> +		}
>> +		res->start += tad_page_size;
>> +	}
>> +
>> +	tad_pmu->regions = regions;
>> +	tad_pmu->region_cnt = tad_cnt;
>> +
>> +	tad_pmu->pmu = (struct pmu) {
>> +
>> +		.module		= THIS_MODULE,
>> +		.attr_groups	= tad_pmu_attr_groups,
>> +		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE |
>> +				  PERF_PMU_CAP_NO_INTERRUPT,
>> +		.task_ctx_nr	= perf_invalid_context,
>> +
>> +		.event_init	= tad_pmu_event_init,
>> +		.add		= tad_pmu_event_counter_add,
>> +		.del		= tad_pmu_event_counter_del,
>> +		.start		= tad_pmu_event_counter_start,
>> +		.stop		= tad_pmu_event_counter_stop,
>> +		.read		= tad_pmu_event_counter_read,
>> +	};
>> +
>> +	tad_pmu->cpu = raw_smp_processor_id();
>> +
>
>Hi Bhaskara,
>   I think there is some memory leaks in this function. Incase cpuotplug code
>fails, don't we need to free momory allocated to `tad_pmu`?
>
>Thanks,
>Kajol Jain
>
>
>> +	/* Register pmu instance for cpu hotplug */
>> +	ret = cpuhp_state_add_instance_nocalls(tad_pmu_cpuhp_state,
>> +					       &tad_pmu->node);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	name = "tad";
>> +	ret = perf_pmu_register(&tad_pmu->pmu, name, -1);
>> +	if (ret)
>> +
>	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
>> +						    &tad_pmu->node);
>> +
>> +	return ret;
>> +}
>> +
>> +static int tad_pmu_remove(struct platform_device *pdev) {
>> +	struct tad_pmu *pmu = platform_get_drvdata(pdev);
>> +
>> +	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
>> +						&pmu->node);
>> +	perf_pmu_unregister(&pmu->pmu);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id tad_pmu_of_match[] = {
>> +	{ .compatible = "marvell,cn10k-tad-pmu", },
>> +	{},
>> +};
>> +
>> +static struct platform_driver tad_pmu_driver = {
>> +	.driver         = {
>> +		.name   = "cn10k_tad_pmu",
>> +		.of_match_table = of_match_ptr(tad_pmu_of_match),
>> +		.suppress_bind_attrs = true,
>> +	},
>> +	.probe          = tad_pmu_probe,
>> +	.remove         = tad_pmu_remove,
>> +};
>> +
>> +static int tad_pmu_offline_cpu(unsigned int cpu, struct hlist_node
>> +*node) {
>> +	struct tad_pmu *pmu = hlist_entry_safe(node, struct tad_pmu, node);
>> +	unsigned int target;
>> +
>> +	if (cpu != pmu->cpu)
>> +		return 0;
>> +
>> +	target = cpumask_any_but(cpu_online_mask, cpu);
>> +	if (target >= nr_cpu_ids)
>> +		return 0;
>> +
>> +	perf_pmu_migrate_context(&pmu->pmu, cpu, target);
>> +	pmu->cpu = target;
>> +
>> +	return 0;
>> +}
>> +
>> +static int __init tad_pmu_init(void)
>> +{
>> +	int ret;
>> +
>> +	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
>> +				      "perf/cn10k/tadpmu:online",
>> +				      NULL,
>> +				      tad_pmu_offline_cpu);
>
>> +	if (ret < 0)
>> +		return ret;
>> +	tad_pmu_cpuhp_state = ret;
>> +	return platform_driver_register(&tad_pmu_driver);
>> +}
>> +
>> +static void __exit tad_pmu_exit(void) {
>> +	platform_driver_unregister(&tad_pmu_driver);
>> +	cpuhp_remove_multi_state(tad_pmu_cpuhp_state);
>> +}
>> +
>> +module_init(tad_pmu_init);
>> +module_exit(tad_pmu_exit);
>> +
>> +MODULE_DESCRIPTION("Marvell CN10K LLC-TAD Perf driver");
>> +MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@marvell.com>");
>> +MODULE_LICENSE("GPL v2");
>>

RE: [EXT] Re: [PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support

[Bhaskara Budiredla]

Thanks Kajol for pointing to memory leak.
I will fix it in the next version.

Thanks,
Bhaskara

>-----Original Message-----
>From: kajoljain <kjain@linux.ibm.com>
>Sent: Saturday, August 14, 2021 7:24 PM
>To: Bhaskara Budiredla <bbudiredla@marvell.com>; will@kernel.org;
>mark.rutland@arm.com; robh+dt@kernel.org; Sunil Kovvuri Goutham
><sgoutham@marvell.com>
>Cc: linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-
>kernel@vger.kernel.org
>Subject: [EXT] Re: [PATCH 1/2] drivers: perf: Add LLC-TAD perf counter support
>
>External Email
>
>----------------------------------------------------------------------
>
>
>On 8/12/21 11:12 PM, Bhaskara Budiredla wrote:
>> This driver adds support for Last-level cache tag-and-data unit
>> (LLC-TAD) PMU that is featured in some of the Marvell's CN10K
>> infrastructure silicons.
>>
>> The LLC is divided into 2N slices distributed across N Mesh tiles in a
>> single-socket configuration. The driver always configures the same
>> counter for all of the TADs. The user would end up effectively
>> reserving one of eight counters in every TAD to look across all TADs.
>> The occurrences of events are aggregated and presented to the user at
>> the end of an application run. The driver does not provide a way for
>> the user to partition TADs so that different TADs are used for
>> different applications.
>>
>> The event counters are zeroed on start event counting to avoid any
>> rollover issues. TAD perf counters are 64-bit, so it's not currently
>> possible to overflow event counters at current mesh and core
>> frequencies.
>>
>> To measure tad pmu events use perf tool stat command. For instance:
>>
>> perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application> perf
>> stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application>
>>
>> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
>> ---
>>  drivers/perf/Kconfig                 |   7 +
>>  drivers/perf/Makefile                |   1 +
>>  drivers/perf/marvell_cn10k_tad_pmu.c | 429
>> +++++++++++++++++++++++++++
>>  3 files changed, 437 insertions(+)
>>  create mode 100644 drivers/perf/marvell_cn10k_tad_pmu.c
>>
>> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index
>> 77522e5efe11..73dca11f8080 100644
>> --- a/drivers/perf/Kconfig
>> +++ b/drivers/perf/Kconfig
>> @@ -137,6 +137,13 @@ config ARM_DMC620_PMU
>>  	  Support for PMU events monitoring on the ARM DMC-620 memory
>>  	  controller.
>>
>> +config MARVELL_CN10K_TAD_PMU
>> +	tristate "Marvell CN10K LLC-TAD PMU"
>> +	depends on ARM64
>> +	help
>> +	  Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
>> +	  performance monitors on CN10K family silicons.
>> +
>>  source "drivers/perf/hisilicon/Kconfig"
>>
>>  endmenu
>> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile index
>> 5260b116c7da..2db5418d5b0a 100644
>> --- a/drivers/perf/Makefile
>> +++ b/drivers/perf/Makefile
>> @@ -14,3 +14,4 @@ obj-$(CONFIG_THUNDERX2_PMU) +=
>thunderx2_pmu.o
>>  obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
>>  obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
>>  obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
>> +obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
>> diff --git a/drivers/perf/marvell_cn10k_tad_pmu.c
>> b/drivers/perf/marvell_cn10k_tad_pmu.c
>> new file mode 100644
>> index 000000000000..fec8b90d52d2
>> --- /dev/null
>> +++ b/drivers/perf/marvell_cn10k_tad_pmu.c
>> @@ -0,0 +1,429 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* Marvell CN10K LLC-TAD perf driver
>> + *
>> + * Copyright (C) 2021 Marvell.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> +modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#define pr_fmt(fmt) "tad_pmu: " fmt
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/cpuhotplug.h>
>> +#include <linux/perf_event.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/arm-smccc.h>
>> +
>> +#define TAD_PFC_OFFSET		0x0800
>> +#define TAD_PFC(counter)	(TAD_PFC_OFFSET | (counter << 3))
>> +#define TAD_PRF_OFFSET		0x0900
>> +#define TAD_PRF(counter)	(TAD_PRF_OFFSET | (counter << 3))
>> +#define TAD_PRF_CNTSEL_MASK	0xFF
>> +#define TAD_MAX_COUNTERS	8
>> +
>> +#define to_tad_pmu(p) (container_of(p, struct tad_pmu, pmu))
>> +
>> +struct tad_region {
>> +	void __iomem	*base;
>> +};
>> +
>> +struct tad_pmu {
>> +	struct pmu pmu;
>> +	struct tad_region *regions;
>> +	u32 region_cnt;
>> +	unsigned int cpu;
>> +	struct hlist_node node;
>> +	struct perf_event *events[TAD_MAX_COUNTERS];
>> +	DECLARE_BITMAP(counters_map, TAD_MAX_COUNTERS); };
>> +
>> +static int tad_pmu_cpuhp_state;
>> +
>> +static void tad_pmu_event_counter_read(struct perf_event *event) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	u32 counter_idx = hwc->idx;
>> +	u64 delta, prev, new;
>> +	int i;
>> +
>> +	do {
>> +		prev = local64_read(&hwc->prev_count);
>> +		for (i = 0, new = 0; i < tad_pmu->region_cnt; i++)
>> +			new += readq(tad_pmu->regions[i].base +
>> +				     TAD_PFC(counter_idx));
>> +	} while (local64_cmpxchg(&hwc->prev_count, prev, new) != prev);
>> +
>> +	delta = (new - prev) & GENMASK_ULL(63, 0);
>> +	local64_add(delta, &event->count);
>> +}
>> +
>> +static void tad_pmu_event_counter_stop(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	u32 counter_idx = hwc->idx;
>> +	int i;
>> +
>> +	/* TAD()_PFC() stop counting on the write
>> +	 * which sets TAD()_PRF()[CNTSEL] == 0
>> +	 */
>> +	for (i = 0; i < tad_pmu->region_cnt; i++)
>> +		writeq_relaxed(0, tad_pmu->regions[i].base +
>> +			       TAD_PRF(counter_idx));
>> +
>> +	tad_pmu_event_counter_read(event);
>> +	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; }
>> +
>> +static void tad_pmu_event_counter_start(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	u32 event_idx = event->attr.config;
>> +	u32 counter_idx = hwc->idx;
>> +	u64 reg_val;
>> +	int i;
>> +
>> +	hwc->state = 0;
>> +
>> +	/* Typically TAD_PFC() are zeroed to start counting */
>> +	for (i = 0; i < tad_pmu->region_cnt; i++)
>> +		writeq_relaxed(0, tad_pmu->regions[i].base +
>> +			       TAD_PFC(counter_idx));
>> +
>> +	/* TAD()_PFC() start counting on the write
>> +	 * which sets TAD()_PRF()[CNTSEL] != 0
>> +	 */
>> +	for (i = 0; i < tad_pmu->region_cnt; i++) {
>> +		reg_val = readq_relaxed(tad_pmu->regions[i].base +
>> +					TAD_PRF(counter_idx));
>> +		reg_val |= (event_idx & 0xFF);
>> +		writeq_relaxed(reg_val,	tad_pmu->regions[i].base +
>> +			       TAD_PRF(counter_idx));
>> +	}
>> +}
>> +
>> +static void tad_pmu_event_counter_del(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	int idx = hwc->idx;
>> +
>> +	tad_pmu_event_counter_stop(event, flags | PERF_EF_UPDATE);
>> +	tad_pmu->events[idx] = NULL;
>> +	clear_bit(idx, tad_pmu->counters_map); }
>> +
>> +static int tad_pmu_event_counter_add(struct perf_event *event, int
>> +flags) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +	struct hw_perf_event *hwc = &event->hw;
>> +	int idx;
>> +
>> +	/* Get a free counter for this event */
>> +	idx = find_first_zero_bit(tad_pmu->counters_map,
>TAD_MAX_COUNTERS);
>> +	if (idx == TAD_MAX_COUNTERS)
>> +		return -EAGAIN;
>> +
>> +	set_bit(idx, tad_pmu->counters_map);
>> +
>> +	hwc->idx = idx;
>> +	hwc->state = PERF_HES_STOPPED;
>> +	tad_pmu->events[idx] = event;
>> +
>> +	if (flags & PERF_EF_START)
>> +		tad_pmu_event_counter_start(event, flags);
>> +
>> +	return 0;
>> +}
>> +
>> +static int tad_pmu_event_init(struct perf_event *event) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(event->pmu);
>> +
>> +	if (!event->attr.disabled)
>> +		return -EINVAL;
>> +
>> +	if (event->attr.type != event->pmu->type)
>> +		return -ENOENT;
>> +
>> +	if (event->state != PERF_EVENT_STATE_OFF)
>> +		return -EINVAL;
>> +
>> +	event->cpu = tad_pmu->cpu;
>> +	event->hw.idx = -1;
>> +	event->hw.config_base = event->attr.config;
>> +
>> +	return 0;
>> +}
>> +
>> +static ssize_t tad_pmu_event_show(struct device *dev,
>> +				struct device_attribute *attr, char *page) {
>> +	struct perf_pmu_events_attr *pmu_attr;
>> +
>> +	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
>> +	return sprintf(page, "event=0x%02llx\n", pmu_attr->id); }
>> +
>> +#define TAD_PMU_EVENT_ATTR(name, config)			\
>> +	PMU_EVENT_ATTR_ID(name, tad_pmu_event_show, config)
>> +
>> +static struct attribute *tad_pmu_event_attrs[] = {
>> +	TAD_PMU_EVENT_ATTR(tad_none, 0x0),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_any, 0x1),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_mn, 0x2),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_in_exlmn, 0x3),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_any, 0x4),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_mn, 0x5),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_exlmn, 0x6),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_dss, 0x7),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_in_retry_dss, 0x8),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_any, 0x9),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_in_dss, 0xa),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_any, 0xb),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_rd, 0xc),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_dss_wr, 0xd),
>> +	TAD_PMU_EVENT_ATTR(tad_req_msh_out_evict, 0xe),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_any, 0xf),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_exlmn, 0x10),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_retry_mn, 0x11),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_exlmn, 0x12),
>> +	TAD_PMU_EVENT_ATTR(tad_rsp_msh_out_mn, 0x13),
>> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_any, 0x14),
>> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_mn, 0x15),
>> +	TAD_PMU_EVENT_ATTR(tad_snp_msh_out_exlmn, 0x16),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_any, 0x17),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_fill, 0x18),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_msh_out_dss, 0x19),
>> +	TAD_PMU_EVENT_ATTR(tad_alloc_dtg, 0x1a),
>> +	TAD_PMU_EVENT_ATTR(tad_alloc_ltg, 0x1b),
>> +	TAD_PMU_EVENT_ATTR(tad_alloc_any, 0x1c),
>> +	TAD_PMU_EVENT_ATTR(tad_hit_dtg, 0x1d),
>> +	TAD_PMU_EVENT_ATTR(tad_hit_ltg, 0x1e),
>> +	TAD_PMU_EVENT_ATTR(tad_hit_any, 0x1f),
>> +	TAD_PMU_EVENT_ATTR(tad_tag_rd, 0x20),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_rd, 0x21),
>> +	TAD_PMU_EVENT_ATTR(tad_dat_rd_byp, 0x22),
>> +	TAD_PMU_EVENT_ATTR(tad_ifb_occ, 0x23),
>> +	TAD_PMU_EVENT_ATTR(tad_req_occ, 0x24),
>> +	NULL,
>> +};
>> +
>> +static const struct attribute_group tad_pmu_events_attr_group = {
>> +	.name = "events",
>> +	.attrs = tad_pmu_event_attrs,
>> +};
>> +
>> +PMU_FORMAT_ATTR(event, "config:0-7");
>> +
>> +static struct attribute *tad_pmu_format_attrs[] = {
>> +	&format_attr_event.attr,
>> +	NULL,
>> +};
>> +
>> +static struct attribute_group tad_pmu_format_attr_group = {
>> +	.name = "format",
>> +	.attrs = tad_pmu_format_attrs,
>> +};
>> +
>> +static ssize_t tad_pmu_cpumask_show(struct device *dev,
>> +				struct device_attribute *attr, char *buf) {
>> +	struct tad_pmu *tad_pmu = to_tad_pmu(dev_get_drvdata(dev));
>> +
>> +	return cpumap_print_to_pagebuf(true, buf, cpumask_of(tad_pmu-
>>cpu));
>> +}
>> +
>> +static DEVICE_ATTR(cpumask, 0444, tad_pmu_cpumask_show, NULL);
>> +
>> +static struct attribute *tad_pmu_cpumask_attrs[] = {
>> +	&dev_attr_cpumask.attr,
>> +	NULL,
>> +};
>> +
>> +static struct attribute_group tad_pmu_cpumask_attr_group = {
>> +	.attrs = tad_pmu_cpumask_attrs,
>> +};
>> +
>> +static const struct attribute_group *tad_pmu_attr_groups[] = {
>> +	&tad_pmu_events_attr_group,
>> +	&tad_pmu_format_attr_group,
>> +	&tad_pmu_cpumask_attr_group,
>> +	NULL,
>> +};
>> +
>> +static int tad_pmu_probe(struct platform_device *pdev) {
>> +	struct device_node *node = pdev->dev.of_node;
>> +	struct tad_region *regions;
>> +	struct tad_pmu *tad_pmu;
>> +	struct resource *res;
>> +	u32 tad_pmu_page_size;
>> +	u32 tad_page_size;
>> +	u32 tad_cnt;
>> +	int i, ret;
>> +	char *name;
>> +
>> +	tad_pmu = devm_kzalloc(&pdev->dev, sizeof(*tad_pmu),
>GFP_KERNEL);
>> +	if (!tad_pmu)
>> +		return -ENOMEM;
>> +
>> +	platform_set_drvdata(pdev, tad_pmu);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	if (!res) {
>> +		dev_err(&pdev->dev, "Mem resource not found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	ret = of_property_read_u32(node, "tad-page-size", &tad_page_size);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Can't find tad-page-size property\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = of_property_read_u32(node, "tad-pmu-page-size",
>> +				   &tad_pmu_page_size);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Can't find tad-pmu-page-size
>property\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = of_property_read_u32(node, "tad-cnt", &tad_cnt);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Can't find tad-cnt property\n");
>> +		return ret;
>> +	}
>> +
>> +	regions = devm_kcalloc(&pdev->dev, tad_cnt,
>> +			       sizeof(*regions), GFP_KERNEL);
>> +	if (!regions)
>> +		return -ENOMEM;
>> +
>> +	/* ioremap the distributed TAD pmu regions */
>> +	for (i = 0; i < tad_cnt && res->start < res->end; i++) {
>> +		regions[i].base = devm_ioremap(&pdev->dev,
>> +					       res->start,
>> +					       tad_pmu_page_size);
>> +		if (IS_ERR(regions[i].base)) {
>> +			dev_err(&pdev->dev, "TAD%d ioremap fail\n", i);
>> +			return -ENOMEM;
>> +		}
>> +		res->start += tad_page_size;
>> +	}
>> +
>> +	tad_pmu->regions = regions;
>> +	tad_pmu->region_cnt = tad_cnt;
>> +
>> +	tad_pmu->pmu = (struct pmu) {
>> +
>> +		.module		= THIS_MODULE,
>> +		.attr_groups	= tad_pmu_attr_groups,
>> +		.capabilities	= PERF_PMU_CAP_NO_EXCLUDE |
>> +				  PERF_PMU_CAP_NO_INTERRUPT,
>> +		.task_ctx_nr	= perf_invalid_context,
>> +
>> +		.event_init	= tad_pmu_event_init,
>> +		.add		= tad_pmu_event_counter_add,
>> +		.del		= tad_pmu_event_counter_del,
>> +		.start		= tad_pmu_event_counter_start,
>> +		.stop		= tad_pmu_event_counter_stop,
>> +		.read		= tad_pmu_event_counter_read,
>> +	};
>> +
>> +	tad_pmu->cpu = raw_smp_processor_id();
>> +
>
>Hi Bhaskara,
>   I think there is some memory leaks in this function. Incase cpuotplug code
>fails, don't we need to free momory allocated to `tad_pmu`?
>
>Thanks,
>Kajol Jain
>
>
>> +	/* Register pmu instance for cpu hotplug */
>> +	ret = cpuhp_state_add_instance_nocalls(tad_pmu_cpuhp_state,
>> +					       &tad_pmu->node);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	name = "tad";
>> +	ret = perf_pmu_register(&tad_pmu->pmu, name, -1);
>> +	if (ret)
>> +
>	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
>> +						    &tad_pmu->node);
>> +
>> +	return ret;
>> +}
>> +
>> +static int tad_pmu_remove(struct platform_device *pdev) {
>> +	struct tad_pmu *pmu = platform_get_drvdata(pdev);
>> +
>> +	cpuhp_state_remove_instance_nocalls(tad_pmu_cpuhp_state,
>> +						&pmu->node);
>> +	perf_pmu_unregister(&pmu->pmu);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id tad_pmu_of_match[] = {
>> +	{ .compatible = "marvell,cn10k-tad-pmu", },
>> +	{},
>> +};
>> +
>> +static struct platform_driver tad_pmu_driver = {
>> +	.driver         = {
>> +		.name   = "cn10k_tad_pmu",
>> +		.of_match_table = of_match_ptr(tad_pmu_of_match),
>> +		.suppress_bind_attrs = true,
>> +	},
>> +	.probe          = tad_pmu_probe,
>> +	.remove         = tad_pmu_remove,
>> +};
>> +
>> +static int tad_pmu_offline_cpu(unsigned int cpu, struct hlist_node
>> +*node) {
>> +	struct tad_pmu *pmu = hlist_entry_safe(node, struct tad_pmu, node);
>> +	unsigned int target;
>> +
>> +	if (cpu != pmu->cpu)
>> +		return 0;
>> +
>> +	target = cpumask_any_but(cpu_online_mask, cpu);
>> +	if (target >= nr_cpu_ids)
>> +		return 0;
>> +
>> +	perf_pmu_migrate_context(&pmu->pmu, cpu, target);
>> +	pmu->cpu = target;
>> +
>> +	return 0;
>> +}
>> +
>> +static int __init tad_pmu_init(void)
>> +{
>> +	int ret;
>> +
>> +	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
>> +				      "perf/cn10k/tadpmu:online",
>> +				      NULL,
>> +				      tad_pmu_offline_cpu);
>
>> +	if (ret < 0)
>> +		return ret;
>> +	tad_pmu_cpuhp_state = ret;
>> +	return platform_driver_register(&tad_pmu_driver);
>> +}
>> +
>> +static void __exit tad_pmu_exit(void) {
>> +	platform_driver_unregister(&tad_pmu_driver);
>> +	cpuhp_remove_multi_state(tad_pmu_cpuhp_state);
>> +}
>> +
>> +module_init(tad_pmu_init);
>> +module_exit(tad_pmu_exit);
>> +
>> +MODULE_DESCRIPTION("Marvell CN10K LLC-TAD Perf driver");
>> +MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@marvell.com>");
>> +MODULE_LICENSE("GPL v2");
>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [EXT] Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Rob Herring]

On Tue, Aug 17, 2021 at 4:11 AM Bhaskara Budiredla
<bbudiredla@marvell.com> wrote:
>
> Hi Rob,
>
> Thanks for the steps. I seeing minimum version error, though the dtschema is latest.
>
> $ make dt_binding_check
> sort: -:2: disorder: 0
> ERROR: dtschema minimum version is v2021.2.1
> Documentation/devicetree/bindings/Makefile:12: recipe for target 'check_dtschema_version' failed
> make[1]: *** [check_dtschema_version] Error 1
> Makefile:1418: recipe for target 'dt_binding_check' failed
> make: *** [dt_binding_check] Error 2
>
> $ pip3 show dtschema
> Name: dtschema
> Version: 2021.7
> Summary: DeviceTree validation schema and tools
> Home-page: https://github.com/devicetree-org/dt-schema
> Author: Rob Herring
> Author-email: robh@kernel.org
> License: BSD

Check your PATH?

What does 'dt-doc-validate --version' give you?

Rob

Re: [EXT] Re: [PATCH 2/2] dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

[Rob Herring]

On Tue, Aug 17, 2021 at 4:11 AM Bhaskara Budiredla
<bbudiredla@marvell.com> wrote:
>
> Hi Rob,
>
> Thanks for the steps. I seeing minimum version error, though the dtschema is latest.
>
> $ make dt_binding_check
> sort: -:2: disorder: 0
> ERROR: dtschema minimum version is v2021.2.1
> Documentation/devicetree/bindings/Makefile:12: recipe for target 'check_dtschema_version' failed
> make[1]: *** [check_dtschema_version] Error 1
> Makefile:1418: recipe for target 'dt_binding_check' failed
> make: *** [dt_binding_check] Error 2
>
> $ pip3 show dtschema
> Name: dtschema
> Version: 2021.7
> Summary: DeviceTree validation schema and tools
> Home-page: https://github.com/devicetree-org/dt-schema
> Author: Rob Herring
> Author-email: robh@kernel.org
> License: BSD

Check your PATH?

What does 'dt-doc-validate --version' give you?

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel