All of lore.kernel.org
 help / color / mirror / Atom feed
From: Evgeny Novikov <novikov@ispras.ru>
To: Akihiro Tsukada <tskd08@gmail.com>
Cc: Evgeny Novikov <novikov@ispras.ru>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Kirill Shilimanov <kirill.shilimanov@huawei.com>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	ldv-project@linuxtesting.org
Subject: [PATCH v2] media: pt3: Switch to using functions pcim_* and devm_*
Date: Sat, 14 Aug 2021 18:57:42 +0300	[thread overview]
Message-ID: <20210814155742.11392-1-novikov@ispras.ru> (raw)

pt3_probe() did not free one of IO mappings in case when one of them was
successful while another one failed. The patch fixed that by using
functions pcim_*. Also, it simplifies error handling through switching
to devm_* functions.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
---
v2: Use functions pcim_* and devm_* to simplify code (Andy Shevchenko)
---
 drivers/media/pci/pt3/pt3.c | 58 +++++++++----------------------------
 1 file changed, 14 insertions(+), 44 deletions(-)

diff --git a/drivers/media/pci/pt3/pt3.c b/drivers/media/pci/pt3/pt3.c
index c0bc86793355..0d51bdf01f43 100644
--- a/drivers/media/pci/pt3/pt3.c
+++ b/drivers/media/pci/pt3/pt3.c
@@ -685,12 +685,6 @@ static void pt3_remove(struct pci_dev *pdev)
 	for (i = PT3_NUM_FE - 1; i >= 0; i--)
 		pt3_cleanup_adapter(pt3, i);
 	i2c_del_adapter(&pt3->i2c_adap);
-	kfree(pt3->i2c_buf);
-	pci_iounmap(pt3->pdev, pt3->regs[0]);
-	pci_iounmap(pt3->pdev, pt3->regs[1]);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	kfree(pt3);
 }
 
 static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -704,14 +698,14 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pci_read_config_byte(pdev, PCI_REVISION_ID, &rev) || rev != 1)
 		return -ENODEV;
 
-	ret = pci_enable_device(pdev);
+	ret = pcim_enable_device(pdev);
 	if (ret < 0)
 		return -ENODEV;
 	pci_set_master(pdev);
 
-	ret = pci_request_regions(pdev, DRV_NAME);
+	ret = pcim_iomap_regions(pdev, BIT(0) | BIT(2), DRV_NAME);
 	if (ret < 0)
-		goto err_disable_device;
+		return ret;
 
 	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
 	if (ret == 0)
@@ -722,42 +716,32 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 		else {
 			dev_err(&pdev->dev, "Failed to set DMA mask\n");
-			goto err_release_regions;
+			return ret;
 		}
 		dev_info(&pdev->dev, "Use 32bit DMA\n");
 	}
 
-	pt3 = kzalloc(sizeof(*pt3), GFP_KERNEL);
-	if (!pt3) {
-		ret = -ENOMEM;
-		goto err_release_regions;
-	}
+	pt3 = devm_kzalloc(&pdev->dev, sizeof(*pt3), GFP_KERNEL);
+	if (!pt3)
+		return -ENOMEM;
 	pci_set_drvdata(pdev, pt3);
 	pt3->pdev = pdev;
 	mutex_init(&pt3->lock);
-	pt3->regs[0] = pci_ioremap_bar(pdev, 0);
-	pt3->regs[1] = pci_ioremap_bar(pdev, 2);
-	if (pt3->regs[0] == NULL || pt3->regs[1] == NULL) {
-		dev_err(&pdev->dev, "Failed to ioremap\n");
-		ret = -ENOMEM;
-		goto err_kfree;
-	}
+	pt3->regs[0] = pcim_iomap_table(pdev)[0];
+	pt3->regs[1] = pcim_iomap_table(pdev)[2];
 
 	ver = ioread32(pt3->regs[0] + REG_VERSION);
 	if ((ver >> 16) != 0x0301) {
 		dev_warn(&pdev->dev, "PT%d, I/F-ver.:%d not supported\n",
 			 ver >> 24, (ver & 0x00ff0000) >> 16);
-		ret = -ENODEV;
-		goto err_iounmap;
+		return -ENODEV;
 	}
 
 	pt3->num_bufs = clamp_val(num_bufs, MIN_DATA_BUFS, MAX_DATA_BUFS);
 
-	pt3->i2c_buf = kmalloc(sizeof(*pt3->i2c_buf), GFP_KERNEL);
-	if (pt3->i2c_buf == NULL) {
-		ret = -ENOMEM;
-		goto err_iounmap;
-	}
+	pt3->i2c_buf = devm_kmalloc(&pdev->dev, sizeof(*pt3->i2c_buf), GFP_KERNEL);
+	if (!pt3->i2c_buf)
+		return -ENOMEM;
 	i2c = &pt3->i2c_adap;
 	i2c->owner = THIS_MODULE;
 	i2c->algo = &pt3_i2c_algo;
@@ -767,7 +751,7 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	i2c_set_adapdata(i2c, pt3);
 	ret = i2c_add_adapter(i2c);
 	if (ret < 0)
-		goto err_i2cbuf;
+		return ret;
 
 	for (i = 0; i < PT3_NUM_FE; i++) {
 		ret = pt3_alloc_adapter(pt3, i);
@@ -799,21 +783,7 @@ static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	while (i >= 0)
 		pt3_cleanup_adapter(pt3, i--);
 	i2c_del_adapter(i2c);
-err_i2cbuf:
-	kfree(pt3->i2c_buf);
-err_iounmap:
-	if (pt3->regs[0])
-		pci_iounmap(pdev, pt3->regs[0]);
-	if (pt3->regs[1])
-		pci_iounmap(pdev, pt3->regs[1]);
-err_kfree:
-	kfree(pt3);
-err_release_regions:
-	pci_release_regions(pdev);
-err_disable_device:
-	pci_disable_device(pdev);
 	return ret;
-
 }
 
 static const struct pci_device_id pt3_id_table[] = {
-- 
2.26.2


             reply	other threads:[~2021-08-14 15:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-14 15:57 Evgeny Novikov [this message]
2021-08-14 19:54 ` [PATCH v2] media: pt3: Switch to using functions pcim_* and devm_* Andy Shevchenko
2021-08-15  1:33   ` Akihiro TSUKADA
2021-08-23  8:12 ` Akihiro TSUKADA
2021-08-23 14:40   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210814155742.11392-1-novikov@ispras.ru \
    --to=novikov@ispras.ru \
    --cc=andy.shevchenko@gmail.com \
    --cc=kirill.shilimanov@huawei.com \
    --cc=ldv-project@linuxtesting.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=tskd08@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.