All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: Johan Hovold <johan@kernel.org>, Alex Elder <elder@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	greybus-dev@lists.linaro.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>,
	kernel test robot <lkp@intel.com>
Subject: [PATCH v2] staging: greybus: Convert uart.c from IDR to XArray
Date: Sat, 14 Aug 2021 20:11:30 +0200	[thread overview]
Message-ID: <20210814181130.21383-1-fmdefrancesco@gmail.com> (raw)

Convert greybus/uart.c from IDR to XArray. The abstract data type XArray
is more memory-efficient, parallelisable, and cache friendly. It takes
advantage of RCU to perform lookups without locking. Furthermore, IDR is
deprecated because XArray has a better (cleaner and more consistent) API.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---

v1->v2:
        Fixed an issue found by the kernel test robot. It was due to
        passing to xa_*lock() the same old mutex that IDR used with
        the previous version of the code.

 drivers/staging/greybus/uart.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index 73f01ed1e5b7..5bf993e40f84 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -22,7 +22,7 @@
 #include <linux/serial.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
-#include <linux/idr.h>
+#include <linux/xarray.h>
 #include <linux/fs.h>
 #include <linux/kdev_t.h>
 #include <linux/kfifo.h>
@@ -33,6 +33,7 @@
 #include "gbphy.h"
 
 #define GB_NUM_MINORS	16	/* 16 is more than enough */
+#define GB_RANGE_MINORS		XA_LIMIT(0, GB_NUM_MINORS)
 #define GB_NAME		"ttyGB"
 
 #define GB_UART_WRITE_FIFO_SIZE		PAGE_SIZE
@@ -67,8 +68,7 @@ struct gb_tty {
 };
 
 static struct tty_driver *gb_tty_driver;
-static DEFINE_IDR(tty_minors);
-static DEFINE_MUTEX(table_lock);
+static DEFINE_XARRAY(tty_minors);
 
 static int gb_uart_receive_data_handler(struct gb_operation *op)
 {
@@ -77,6 +77,7 @@ static int gb_uart_receive_data_handler(struct gb_operation *op)
 	struct tty_port *port = &gb_tty->port;
 	struct gb_message *request = op->request;
 	struct gb_uart_recv_data_request *receive_data;
+
 	u16 recv_data_size;
 	int count;
 	unsigned long tty_flags = TTY_NORMAL;
@@ -341,8 +342,8 @@ static struct gb_tty *get_gb_by_minor(unsigned int minor)
 {
 	struct gb_tty *gb_tty;
 
-	mutex_lock(&table_lock);
-	gb_tty = idr_find(&tty_minors, minor);
+	xa_lock(&tty_minors);
+	gb_tty = xa_load(&tty_minors, minor);
 	if (gb_tty) {
 		mutex_lock(&gb_tty->mutex);
 		if (gb_tty->disconnected) {
@@ -353,19 +354,19 @@ static struct gb_tty *get_gb_by_minor(unsigned int minor)
 			mutex_unlock(&gb_tty->mutex);
 		}
 	}
-	mutex_unlock(&table_lock);
+	xa_unlock(&tty_minors);
 	return gb_tty;
 }
 
 static int alloc_minor(struct gb_tty *gb_tty)
 {
 	int minor;
+	int ret;
 
-	mutex_lock(&table_lock);
-	minor = idr_alloc(&tty_minors, gb_tty, 0, GB_NUM_MINORS, GFP_KERNEL);
-	mutex_unlock(&table_lock);
-	if (minor >= 0)
-		gb_tty->minor = minor;
+	ret = xa_alloc(&tty_minors, &minor, gb_tty, GB_RANGE_MINORS, GFP_KERNEL);
+	if (ret)
+		return ret;
+	gb_tty->minor = minor;
 	return minor;
 }
 
@@ -374,9 +375,7 @@ static void release_minor(struct gb_tty *gb_tty)
 	int minor = gb_tty->minor;
 
 	gb_tty->minor = 0;	/* Maybe should use an invalid value instead */
-	mutex_lock(&table_lock);
-	idr_remove(&tty_minors, minor);
-	mutex_unlock(&table_lock);
+	xa_erase(&tty_minors, minor);
 }
 
 static int gb_tty_install(struct tty_driver *driver, struct tty_struct *tty)
@@ -982,7 +981,7 @@ static void gb_tty_exit(void)
 {
 	tty_unregister_driver(gb_tty_driver);
 	put_tty_driver(gb_tty_driver);
-	idr_destroy(&tty_minors);
+	xa_destroy(&tty_minors);
 }
 
 static const struct gbphy_device_id gb_uart_id_table[] = {
-- 
2.32.0


             reply	other threads:[~2021-08-14 18:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-14 18:11 Fabio M. De Francesco [this message]
2021-08-16 14:46 ` [PATCH v2] staging: greybus: Convert uart.c from IDR to XArray Alex Elder
2021-08-16 15:01   ` Greg Kroah-Hartman
2021-08-16 15:06     ` Dan Carpenter
2021-08-16 15:10       ` [greybus-dev] " Alex Elder
2021-08-16 18:36         ` Dan Carpenter
2021-08-16 18:38           ` Dan Carpenter
2021-08-16 19:17           ` Alex Elder
2021-08-17  4:58             ` Dan Carpenter
2021-08-16 16:55   ` Fabio M. De Francesco
2021-08-17 10:17   ` Fabio M. De Francesco
2021-08-25  5:20   ` Fabio M. De Francesco
2021-08-25 13:45     ` [greybus-dev] " Alex Elder
2021-08-26 15:57       ` Fabio M. De Francesco

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210814181130.21383-1-fmdefrancesco@gmail.com \
    --to=fmdefrancesco@gmail.com \
    --cc=elder@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=greybus-dev@lists.linaro.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=lkp@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.