[PATCH 4/5] ASoC: rt5640: Add rt5640_set_ovcd_params() helper

[Hans de Goede <hdegoede@redhat.com>]

Some devices don't use the builtin jack-detect but can still benefit
from the mic-bias-current over-current-detection to differentiate
between headphones vs a headset.

Move the ovcd init code from rt5640_enable_jack_detect() into a new
rt5640_set_ovcd_params() helper and export this helper as well
as a couple of related ovcd functions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 sound/soc/codecs/rt5640.c | 50 +++++++++++++++++++++++----------------
 sound/soc/codecs/rt5640.h |  4 ++++
 2 files changed, 34 insertions(+), 20 deletions(-)

diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index 04820af03ae8..cd1db5caabad 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -2093,7 +2093,7 @@ int rt5640_sel_asrc_clk_src(struct snd_soc_component *component,
 }
 EXPORT_SYMBOL_GPL(rt5640_sel_asrc_clk_src);
 
-static void rt5640_enable_micbias1_for_ovcd(struct snd_soc_component *component)
+void rt5640_enable_micbias1_for_ovcd(struct snd_soc_component *component)
 {
 	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
 
@@ -2105,8 +2105,9 @@ static void rt5640_enable_micbias1_for_ovcd(struct snd_soc_component *component)
 	snd_soc_dapm_sync_unlocked(dapm);
 	snd_soc_dapm_mutex_unlock(dapm);
 }
+EXPORT_SYMBOL_GPL(rt5640_enable_micbias1_for_ovcd);
 
-static void rt5640_disable_micbias1_for_ovcd(struct snd_soc_component *component)
+void rt5640_disable_micbias1_for_ovcd(struct snd_soc_component *component)
 {
 	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
 
@@ -2117,6 +2118,7 @@ static void rt5640_disable_micbias1_for_ovcd(struct snd_soc_component *component
 	snd_soc_dapm_sync_unlocked(dapm);
 	snd_soc_dapm_mutex_unlock(dapm);
 }
+EXPORT_SYMBOL_GPL(rt5640_disable_micbias1_for_ovcd);
 
 static void rt5640_enable_micbias1_ovcd_irq(struct snd_soc_component *component)
 {
@@ -2368,6 +2370,31 @@ static void rt5640_cancel_work(void *data)
 	cancel_delayed_work_sync(&rt5640->bp_work);
 }
 
+void rt5640_set_ovcd_params(struct snd_soc_component *component)
+{
+	struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
+
+	snd_soc_component_write(component, RT5640_PR_BASE + RT5640_BIAS_CUR4,
+		0xa800 | rt5640->ovcd_sf);
+
+	snd_soc_component_update_bits(component, RT5640_MICBIAS,
+		RT5640_MIC1_OVTH_MASK | RT5640_MIC1_OVCD_MASK,
+		rt5640->ovcd_th | RT5640_MIC1_OVCD_EN);
+
+	/*
+	 * The over-current-detect is only reliable in detecting the absence
+	 * of over-current, when the mic-contact in the jack is short-circuited,
+	 * the hardware periodically retries if it can apply the bias-current
+	 * leading to the ovcd status flip-flopping 1-0-1 with it being 0 about
+	 * 10% of the time, as we poll the ovcd status bit we might hit that
+	 * 10%, so we enable sticky mode and when checking OVCD we clear the
+	 * status, msleep() a bit and then check to get a reliable reading.
+	 */
+	snd_soc_component_update_bits(component, RT5640_IRQ_CTRL2,
+		RT5640_MB1_OC_STKY_MASK, RT5640_MB1_OC_STKY_EN);
+}
+EXPORT_SYMBOL_GPL(rt5640_set_ovcd_params);
+
 static void rt5640_disable_jack_detect(struct snd_soc_component *component)
 {
 	struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
@@ -2415,24 +2442,7 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
 	/* Enabling jd2 in general control 2 */
 	snd_soc_component_write(component, RT5640_DUMMY2, 0x4001);
 
-	snd_soc_component_write(component, RT5640_PR_BASE + RT5640_BIAS_CUR4,
-		0xa800 | rt5640->ovcd_sf);
-
-	snd_soc_component_update_bits(component, RT5640_MICBIAS,
-		RT5640_MIC1_OVTH_MASK | RT5640_MIC1_OVCD_MASK,
-		rt5640->ovcd_th | RT5640_MIC1_OVCD_EN);
-
-	/*
-	 * The over-current-detect is only reliable in detecting the absence
-	 * of over-current, when the mic-contact in the jack is short-circuited,
-	 * the hardware periodically retries if it can apply the bias-current
-	 * leading to the ovcd status flip-flopping 1-0-1 with it being 0 about
-	 * 10% of the time, as we poll the ovcd status bit we might hit that
-	 * 10%, so we enable sticky mode and when checking OVCD we clear the
-	 * status, msleep() a bit and then check to get a reliable reading.
-	 */
-	snd_soc_component_update_bits(component, RT5640_IRQ_CTRL2,
-		RT5640_MB1_OC_STKY_MASK, RT5640_MB1_OC_STKY_EN);
+	rt5640_set_ovcd_params(component);
 
 	/*
 	 * All IRQs get or-ed together, so we need the jack IRQ to report 0
diff --git a/sound/soc/codecs/rt5640.h b/sound/soc/codecs/rt5640.h
index 4d19997dd684..2c28f83e338a 100644
--- a/sound/soc/codecs/rt5640.h
+++ b/sound/soc/codecs/rt5640.h
@@ -2157,6 +2157,10 @@ int rt5640_dmic_enable(struct snd_soc_component *component,
 		       bool dmic1_data_pin, bool dmic2_data_pin);
 int rt5640_sel_asrc_clk_src(struct snd_soc_component *component,
 		unsigned int filter_mask, unsigned int clk_src);
+
+void rt5640_set_ovcd_params(struct snd_soc_component *component);
+void rt5640_enable_micbias1_for_ovcd(struct snd_soc_component *component);
+void rt5640_disable_micbias1_for_ovcd(struct snd_soc_component *component);
 int rt5640_detect_headset(struct snd_soc_component *component, struct gpio_desc *hp_det_gpio);
 
 #endif
-- 
2.31.1