From: "Clément Léger" <clement.leger@bootlin.com>
To: u-boot@lists.denx.de, Eugen Hristev <eugen.hristev@microchip.com>
Cc: "Clément Léger" <clement.leger@bootlin.com>,
"Wenyou Yang" <wenyou.yang@atmel.com>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>
Subject: [PATCH v2 5/5] board: sama5d2_xplained: Modify load addresses
Date: Mon, 16 Aug 2021 14:25:43 +0200 [thread overview]
Message-ID: <20210816122543.33532-6-clement.leger@bootlin.com> (raw)
In-Reply-To: <20210816122543.33532-1-clement.leger@bootlin.com>
When using OP-TEE, address range [0x20000000 - 0x22000000] is reserved.
This modification allows to have a system which always work even when
OP-TEE is present.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
include/configs/sama5d2_xplained.h | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 4f5ceca780..d00017353a 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -11,15 +11,11 @@
#include "at91-sama5_common.h"
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#define CONFIG_SYS_SDRAM_SIZE 0x20000000
-
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x218000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+ (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@@ -31,18 +27,18 @@
/* bootstrap + u-boot + env in sd card */
#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x21000000 at91-sama5d2_xplained.dtb; " \
- "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 zImage; " \
- "bootz 0x22000000 - 0x21000000"
+#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 at91-sama5d2_xplained.dtb; " \
+ "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \
+ "bootz 0x23000000 - 0x22000000"
#elif CONFIG_SPI_BOOT
/* bootstrap + u-boot + env in sd card, but kernel + dtb in eMMC */
#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "ext4load mmc 0:1 0x21000000 /boot/at91-sama5d2_xplained.dtb; " \
- "ext4load mmc 0:1 0x22000000 /boot/zImage; " \
- "bootz 0x22000000 - 0x21000000"
+#define CONFIG_BOOTCOMMAND "ext4load mmc 0:1 0x22000000 /boot/at91-sama5d2_xplained.dtb; " \
+ "ext4load mmc 0:1 0x23000000 /boot/zImage; " \
+ "bootz 0x23000000 - 0x22000000"
#endif
@@ -51,9 +47,9 @@
#undef CONFIG_BOOTCOMMAND
#define CONFIG_ENV_SPI_BUS 1
#define CONFIG_BOOTCOMMAND "sf probe 1:0; " \
- "sf read 0x21000000 0x180000 0x80000; " \
- "sf read 0x22000000 0x200000 0x600000; "\
- "bootz 0x22000000 - 0x21000000"
+ "sf read 0x22000000 0x180000 0x80000; " \
+ "sf read 0x23000000 0x200000 0x600000; "\
+ "bootz 0x23000000 - 0x22000000"
#endif
--
2.32.0
next prev parent reply other threads:[~2021-08-16 12:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 12:25 [PATCH v2 0/5] Use device tree to get DRAM for sama5d27_som1_ek/sama5d2_xplained Clément Léger
2021-08-16 12:25 ` [PATCH v2 1/5] board: sama5d27_som1_ek: Get dram size and base from device tree Clément Léger
2021-08-16 12:25 ` [PATCH v2 2/5] board: sama5d27_som1_ek: Modify load addresses Clément Léger
2021-08-16 12:25 ` [PATCH v2 3/5] ARM: dts: at91: sama5d2_xplained: Add memory node in devicetree Clément Léger
2021-08-16 12:25 ` [PATCH v2 4/5] board: sama5d2_xplained: Get dram size and base from device tree Clément Léger
2021-08-16 12:25 ` Clément Léger [this message]
2021-09-02 11:36 ` [PATCH v2 0/5] Use device tree to get DRAM for sama5d27_som1_ek/sama5d2_xplained Eugen.Hristev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210816122543.33532-6-clement.leger@bootlin.com \
--to=clement.leger@bootlin.com \
--cc=eugen.hristev@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=u-boot@lists.denx.de \
--cc=wenyou.yang@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.