* [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
@ 2021-08-18 1:09 ` Jianqun Xu
0 siblings, 0 replies; 10+ messages in thread
From: Jianqun Xu @ 2021-08-18 1:09 UTC (permalink / raw)
To: lgirdwood, broonie, ulf.hansson, lee.jones, zhangchangzhong, heiko
Cc: linux-rockchip, linux-kernel, Jianqun Xu
Do a fix to rockchip io-domain, follow this orders:
* system running state
-> io-domain vsel to 3.3V (actually is done by pre-disable)
-> regulator_enable
-> vsel change according to regulator voltage
* system running state
-> io-domain vsel to 3.3V
-> regulator_disable
Found on some Rockchip SoCs, the regulator enable or disable without
care about the io-domain maybe caused soc damaged.
Tested on RV1126 EVB.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
---
v3:
- abandon PRE-ENABLE patch
- delete the EVENT_PRE_ENABLE case
v2: none
v1: first version
drivers/soc/rockchip/io-domain.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/soc/rockchip/io-domain.c b/drivers/soc/rockchip/io-domain.c
index cf8182fc3642..3c59077fafb1 100644
--- a/drivers/soc/rockchip/io-domain.c
+++ b/drivers/soc/rockchip/io-domain.c
@@ -123,6 +123,12 @@ static int rockchip_iodomain_notify(struct notifier_block *nb,
} else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
uV = (unsigned long)data;
+ } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
+ uV = MAX_VOLTAGE_3_3;
+ } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
+ uV = MAX_VOLTAGE_3_3;
+ } else if (event & REGULATOR_EVENT_ENABLE) {
+ uV = regulator_get_voltage(supply->reg);
} else {
return NOTIFY_OK;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
@ 2021-08-18 1:09 ` Jianqun Xu
0 siblings, 0 replies; 10+ messages in thread
From: Jianqun Xu @ 2021-08-18 1:09 UTC (permalink / raw)
To: lgirdwood, broonie, ulf.hansson, lee.jones, zhangchangzhong, heiko
Cc: linux-rockchip, linux-kernel, Jianqun Xu
Do a fix to rockchip io-domain, follow this orders:
* system running state
-> io-domain vsel to 3.3V (actually is done by pre-disable)
-> regulator_enable
-> vsel change according to regulator voltage
* system running state
-> io-domain vsel to 3.3V
-> regulator_disable
Found on some Rockchip SoCs, the regulator enable or disable without
care about the io-domain maybe caused soc damaged.
Tested on RV1126 EVB.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
---
v3:
- abandon PRE-ENABLE patch
- delete the EVENT_PRE_ENABLE case
v2: none
v1: first version
drivers/soc/rockchip/io-domain.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/soc/rockchip/io-domain.c b/drivers/soc/rockchip/io-domain.c
index cf8182fc3642..3c59077fafb1 100644
--- a/drivers/soc/rockchip/io-domain.c
+++ b/drivers/soc/rockchip/io-domain.c
@@ -123,6 +123,12 @@ static int rockchip_iodomain_notify(struct notifier_block *nb,
} else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
uV = (unsigned long)data;
+ } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
+ uV = MAX_VOLTAGE_3_3;
+ } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
+ uV = MAX_VOLTAGE_3_3;
+ } else if (event & REGULATOR_EVENT_ENABLE) {
+ uV = regulator_get_voltage(supply->reg);
} else {
return NOTIFY_OK;
}
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
2021-08-18 1:09 ` Jianqun Xu
(?)
@ 2021-08-18 5:11 ` kernel test robot
-1 siblings, 0 replies; 10+ messages in thread
From: kernel test robot @ 2021-08-18 5:11 UTC (permalink / raw)
To: Jianqun Xu, lgirdwood, broonie, ulf.hansson, lee.jones,
zhangchangzhong, heiko
Cc: clang-built-linux, kbuild-all, linux-rockchip, linux-kernel, Jianqun Xu
[-- Attachment #1: Type: text/plain, Size: 4438 bytes --]
Hi Jianqun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on asoc/for-next v5.14-rc6 next-20210817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm64-randconfig-r011-20210816 (attached as .config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project af7818093677dcb4c0840aef96bc029deb219e57)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/883d33a4052a54385679fe84a17345d7083f3a76
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
git checkout 883d33a4052a54385679fe84a17345d7083f3a76
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/soc/rockchip/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/soc/rockchip/io-domain.c:173:21: error: use of undeclared identifier 'REGULATOR_EVENT_PRE_ENABLE'
} else if (event & REGULATOR_EVENT_PRE_ENABLE) {
^
1 error generated.
vim +/REGULATOR_EVENT_PRE_ENABLE +173 drivers/soc/rockchip/io-domain.c
143
144 static int rockchip_iodomain_notify(struct notifier_block *nb,
145 unsigned long event,
146 void *data)
147 {
148 struct rockchip_iodomain_supply *supply =
149 container_of(nb, struct rockchip_iodomain_supply, nb);
150 int uV;
151 int ret;
152
153 /*
154 * According to Rockchip it's important to keep the SoC IO domain
155 * higher than (or equal to) the external voltage. That means we need
156 * to change it before external voltage changes happen in the case
157 * of an increase.
158 *
159 * Note that in the "pre" change we pick the max possible voltage that
160 * the regulator might end up at (the client requests a range and we
161 * don't know for certain the exact voltage). Right now we rely on the
162 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
163 * request something like a max of 3.6V when they really want 3.3V.
164 * We could attempt to come up with better rules if this fails.
165 */
166 if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
167 struct pre_voltage_change_data *pvc_data = data;
168
169 uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
170 } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
171 REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
172 uV = (unsigned long)data;
> 173 } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
174 uV = MAX_VOLTAGE_3_3;
175 } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
176 uV = MAX_VOLTAGE_3_3;
177 } else if (event & REGULATOR_EVENT_ENABLE) {
178 uV = regulator_get_voltage(supply->reg);
179 } else {
180 return NOTIFY_OK;
181 }
182
183 dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
184
185 if (uV > MAX_VOLTAGE_3_3) {
186 dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
187
188 if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
189 return NOTIFY_BAD;
190 }
191
192 ret = supply->iod->write(supply, uV);
193 if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
194 return NOTIFY_BAD;
195
196 dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
197 return NOTIFY_OK;
198 }
199
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 35989 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
@ 2021-08-18 5:11 ` kernel test robot
0 siblings, 0 replies; 10+ messages in thread
From: kernel test robot @ 2021-08-18 5:11 UTC (permalink / raw)
To: Jianqun Xu, lgirdwood, broonie, ulf.hansson, lee.jones,
zhangchangzhong, heiko
Cc: clang-built-linux, kbuild-all, linux-rockchip, linux-kernel, Jianqun Xu
[-- Attachment #1: Type: text/plain, Size: 4438 bytes --]
Hi Jianqun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on asoc/for-next v5.14-rc6 next-20210817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm64-randconfig-r011-20210816 (attached as .config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project af7818093677dcb4c0840aef96bc029deb219e57)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/883d33a4052a54385679fe84a17345d7083f3a76
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
git checkout 883d33a4052a54385679fe84a17345d7083f3a76
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/soc/rockchip/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/soc/rockchip/io-domain.c:173:21: error: use of undeclared identifier 'REGULATOR_EVENT_PRE_ENABLE'
} else if (event & REGULATOR_EVENT_PRE_ENABLE) {
^
1 error generated.
vim +/REGULATOR_EVENT_PRE_ENABLE +173 drivers/soc/rockchip/io-domain.c
143
144 static int rockchip_iodomain_notify(struct notifier_block *nb,
145 unsigned long event,
146 void *data)
147 {
148 struct rockchip_iodomain_supply *supply =
149 container_of(nb, struct rockchip_iodomain_supply, nb);
150 int uV;
151 int ret;
152
153 /*
154 * According to Rockchip it's important to keep the SoC IO domain
155 * higher than (or equal to) the external voltage. That means we need
156 * to change it before external voltage changes happen in the case
157 * of an increase.
158 *
159 * Note that in the "pre" change we pick the max possible voltage that
160 * the regulator might end up at (the client requests a range and we
161 * don't know for certain the exact voltage). Right now we rely on the
162 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
163 * request something like a max of 3.6V when they really want 3.3V.
164 * We could attempt to come up with better rules if this fails.
165 */
166 if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
167 struct pre_voltage_change_data *pvc_data = data;
168
169 uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
170 } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
171 REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
172 uV = (unsigned long)data;
> 173 } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
174 uV = MAX_VOLTAGE_3_3;
175 } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
176 uV = MAX_VOLTAGE_3_3;
177 } else if (event & REGULATOR_EVENT_ENABLE) {
178 uV = regulator_get_voltage(supply->reg);
179 } else {
180 return NOTIFY_OK;
181 }
182
183 dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
184
185 if (uV > MAX_VOLTAGE_3_3) {
186 dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
187
188 if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
189 return NOTIFY_BAD;
190 }
191
192 ret = supply->iod->write(supply, uV);
193 if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
194 return NOTIFY_BAD;
195
196 dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
197 return NOTIFY_OK;
198 }
199
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 35989 bytes --]
[-- Attachment #3: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
@ 2021-08-18 5:11 ` kernel test robot
0 siblings, 0 replies; 10+ messages in thread
From: kernel test robot @ 2021-08-18 5:11 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 4541 bytes --]
Hi Jianqun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on asoc/for-next v5.14-rc6 next-20210817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm64-randconfig-r011-20210816 (attached as .config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project af7818093677dcb4c0840aef96bc029deb219e57)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/883d33a4052a54385679fe84a17345d7083f3a76
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
git checkout 883d33a4052a54385679fe84a17345d7083f3a76
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/soc/rockchip/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/soc/rockchip/io-domain.c:173:21: error: use of undeclared identifier 'REGULATOR_EVENT_PRE_ENABLE'
} else if (event & REGULATOR_EVENT_PRE_ENABLE) {
^
1 error generated.
vim +/REGULATOR_EVENT_PRE_ENABLE +173 drivers/soc/rockchip/io-domain.c
143
144 static int rockchip_iodomain_notify(struct notifier_block *nb,
145 unsigned long event,
146 void *data)
147 {
148 struct rockchip_iodomain_supply *supply =
149 container_of(nb, struct rockchip_iodomain_supply, nb);
150 int uV;
151 int ret;
152
153 /*
154 * According to Rockchip it's important to keep the SoC IO domain
155 * higher than (or equal to) the external voltage. That means we need
156 * to change it before external voltage changes happen in the case
157 * of an increase.
158 *
159 * Note that in the "pre" change we pick the max possible voltage that
160 * the regulator might end up at (the client requests a range and we
161 * don't know for certain the exact voltage). Right now we rely on the
162 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
163 * request something like a max of 3.6V when they really want 3.3V.
164 * We could attempt to come up with better rules if this fails.
165 */
166 if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
167 struct pre_voltage_change_data *pvc_data = data;
168
169 uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
170 } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
171 REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
172 uV = (unsigned long)data;
> 173 } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
174 uV = MAX_VOLTAGE_3_3;
175 } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
176 uV = MAX_VOLTAGE_3_3;
177 } else if (event & REGULATOR_EVENT_ENABLE) {
178 uV = regulator_get_voltage(supply->reg);
179 } else {
180 return NOTIFY_OK;
181 }
182
183 dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
184
185 if (uV > MAX_VOLTAGE_3_3) {
186 dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
187
188 if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
189 return NOTIFY_BAD;
190 }
191
192 ret = supply->iod->write(supply, uV);
193 if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
194 return NOTIFY_BAD;
195
196 dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
197 return NOTIFY_OK;
198 }
199
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 35989 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
2021-08-18 1:09 ` Jianqun Xu
(?)
@ 2021-08-18 5:56 ` kernel test robot
-1 siblings, 0 replies; 10+ messages in thread
From: kernel test robot @ 2021-08-18 5:56 UTC (permalink / raw)
To: Jianqun Xu, lgirdwood, broonie, ulf.hansson, lee.jones,
zhangchangzhong, heiko
Cc: kbuild-all, linux-rockchip, linux-kernel, Jianqun Xu
[-- Attachment #1: Type: text/plain, Size: 4542 bytes --]
Hi Jianqun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on asoc/for-next v5.14-rc6 next-20210817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm-defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/883d33a4052a54385679fe84a17345d7083f3a76
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
git checkout 883d33a4052a54385679fe84a17345d7083f3a76
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arm SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/soc/rockchip/io-domain.c: In function 'rockchip_iodomain_notify':
>> drivers/soc/rockchip/io-domain.c:173:28: error: 'REGULATOR_EVENT_PRE_ENABLE' undeclared (first use in this function); did you mean 'REGULATOR_EVENT_PRE_DISABLE'?
173 | } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| REGULATOR_EVENT_PRE_DISABLE
drivers/soc/rockchip/io-domain.c:173:28: note: each undeclared identifier is reported only once for each function it appears in
vim +173 drivers/soc/rockchip/io-domain.c
143
144 static int rockchip_iodomain_notify(struct notifier_block *nb,
145 unsigned long event,
146 void *data)
147 {
148 struct rockchip_iodomain_supply *supply =
149 container_of(nb, struct rockchip_iodomain_supply, nb);
150 int uV;
151 int ret;
152
153 /*
154 * According to Rockchip it's important to keep the SoC IO domain
155 * higher than (or equal to) the external voltage. That means we need
156 * to change it before external voltage changes happen in the case
157 * of an increase.
158 *
159 * Note that in the "pre" change we pick the max possible voltage that
160 * the regulator might end up at (the client requests a range and we
161 * don't know for certain the exact voltage). Right now we rely on the
162 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
163 * request something like a max of 3.6V when they really want 3.3V.
164 * We could attempt to come up with better rules if this fails.
165 */
166 if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
167 struct pre_voltage_change_data *pvc_data = data;
168
169 uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
170 } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
171 REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
172 uV = (unsigned long)data;
> 173 } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
174 uV = MAX_VOLTAGE_3_3;
175 } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
176 uV = MAX_VOLTAGE_3_3;
177 } else if (event & REGULATOR_EVENT_ENABLE) {
178 uV = regulator_get_voltage(supply->reg);
179 } else {
180 return NOTIFY_OK;
181 }
182
183 dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
184
185 if (uV > MAX_VOLTAGE_3_3) {
186 dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
187
188 if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
189 return NOTIFY_BAD;
190 }
191
192 ret = supply->iod->write(supply, uV);
193 if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
194 return NOTIFY_BAD;
195
196 dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
197 return NOTIFY_OK;
198 }
199
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 54371 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
@ 2021-08-18 5:56 ` kernel test robot
0 siblings, 0 replies; 10+ messages in thread
From: kernel test robot @ 2021-08-18 5:56 UTC (permalink / raw)
To: Jianqun Xu, lgirdwood, broonie, ulf.hansson, lee.jones,
zhangchangzhong, heiko
Cc: kbuild-all, linux-rockchip, linux-kernel, Jianqun Xu
[-- Attachment #1: Type: text/plain, Size: 4542 bytes --]
Hi Jianqun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on asoc/for-next v5.14-rc6 next-20210817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm-defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/883d33a4052a54385679fe84a17345d7083f3a76
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
git checkout 883d33a4052a54385679fe84a17345d7083f3a76
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arm SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/soc/rockchip/io-domain.c: In function 'rockchip_iodomain_notify':
>> drivers/soc/rockchip/io-domain.c:173:28: error: 'REGULATOR_EVENT_PRE_ENABLE' undeclared (first use in this function); did you mean 'REGULATOR_EVENT_PRE_DISABLE'?
173 | } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| REGULATOR_EVENT_PRE_DISABLE
drivers/soc/rockchip/io-domain.c:173:28: note: each undeclared identifier is reported only once for each function it appears in
vim +173 drivers/soc/rockchip/io-domain.c
143
144 static int rockchip_iodomain_notify(struct notifier_block *nb,
145 unsigned long event,
146 void *data)
147 {
148 struct rockchip_iodomain_supply *supply =
149 container_of(nb, struct rockchip_iodomain_supply, nb);
150 int uV;
151 int ret;
152
153 /*
154 * According to Rockchip it's important to keep the SoC IO domain
155 * higher than (or equal to) the external voltage. That means we need
156 * to change it before external voltage changes happen in the case
157 * of an increase.
158 *
159 * Note that in the "pre" change we pick the max possible voltage that
160 * the regulator might end up at (the client requests a range and we
161 * don't know for certain the exact voltage). Right now we rely on the
162 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
163 * request something like a max of 3.6V when they really want 3.3V.
164 * We could attempt to come up with better rules if this fails.
165 */
166 if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
167 struct pre_voltage_change_data *pvc_data = data;
168
169 uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
170 } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
171 REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
172 uV = (unsigned long)data;
> 173 } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
174 uV = MAX_VOLTAGE_3_3;
175 } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
176 uV = MAX_VOLTAGE_3_3;
177 } else if (event & REGULATOR_EVENT_ENABLE) {
178 uV = regulator_get_voltage(supply->reg);
179 } else {
180 return NOTIFY_OK;
181 }
182
183 dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
184
185 if (uV > MAX_VOLTAGE_3_3) {
186 dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
187
188 if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
189 return NOTIFY_BAD;
190 }
191
192 ret = supply->iod->write(supply, uV);
193 if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
194 return NOTIFY_BAD;
195
196 dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
197 return NOTIFY_OK;
198 }
199
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 54371 bytes --]
[-- Attachment #3: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
@ 2021-08-18 5:56 ` kernel test robot
0 siblings, 0 replies; 10+ messages in thread
From: kernel test robot @ 2021-08-18 5:56 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 4645 bytes --]
Hi Jianqun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on asoc/for-next v5.14-rc6 next-20210817]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm-defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/883d33a4052a54385679fe84a17345d7083f3a76
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jianqun-Xu/soc-rockchip-io-domain-set-3-3V-before-regulator-disable/20210818-091213
git checkout 883d33a4052a54385679fe84a17345d7083f3a76
# save the attached .config to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arm SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/soc/rockchip/io-domain.c: In function 'rockchip_iodomain_notify':
>> drivers/soc/rockchip/io-domain.c:173:28: error: 'REGULATOR_EVENT_PRE_ENABLE' undeclared (first use in this function); did you mean 'REGULATOR_EVENT_PRE_DISABLE'?
173 | } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| REGULATOR_EVENT_PRE_DISABLE
drivers/soc/rockchip/io-domain.c:173:28: note: each undeclared identifier is reported only once for each function it appears in
vim +173 drivers/soc/rockchip/io-domain.c
143
144 static int rockchip_iodomain_notify(struct notifier_block *nb,
145 unsigned long event,
146 void *data)
147 {
148 struct rockchip_iodomain_supply *supply =
149 container_of(nb, struct rockchip_iodomain_supply, nb);
150 int uV;
151 int ret;
152
153 /*
154 * According to Rockchip it's important to keep the SoC IO domain
155 * higher than (or equal to) the external voltage. That means we need
156 * to change it before external voltage changes happen in the case
157 * of an increase.
158 *
159 * Note that in the "pre" change we pick the max possible voltage that
160 * the regulator might end up at (the client requests a range and we
161 * don't know for certain the exact voltage). Right now we rely on the
162 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
163 * request something like a max of 3.6V when they really want 3.3V.
164 * We could attempt to come up with better rules if this fails.
165 */
166 if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
167 struct pre_voltage_change_data *pvc_data = data;
168
169 uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
170 } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
171 REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
172 uV = (unsigned long)data;
> 173 } else if (event & REGULATOR_EVENT_PRE_ENABLE) {
174 uV = MAX_VOLTAGE_3_3;
175 } else if (event & REGULATOR_EVENT_PRE_DISABLE) {
176 uV = MAX_VOLTAGE_3_3;
177 } else if (event & REGULATOR_EVENT_ENABLE) {
178 uV = regulator_get_voltage(supply->reg);
179 } else {
180 return NOTIFY_OK;
181 }
182
183 dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
184
185 if (uV > MAX_VOLTAGE_3_3) {
186 dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
187
188 if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
189 return NOTIFY_BAD;
190 }
191
192 ret = supply->iod->write(supply, uV);
193 if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
194 return NOTIFY_BAD;
195
196 dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
197 return NOTIFY_OK;
198 }
199
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 54371 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
2021-08-18 1:09 ` Jianqun Xu
@ 2021-08-18 12:27 ` Mark Brown
-1 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2021-08-18 12:27 UTC (permalink / raw)
To: Jianqun Xu
Cc: lgirdwood, ulf.hansson, lee.jones, zhangchangzhong, heiko,
linux-rockchip, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 384 bytes --]
On Wed, Aug 18, 2021 at 09:09:56AM +0800, Jianqun Xu wrote:
> + } else if (event & REGULATOR_EVENT_ENABLE) {
> + uV = regulator_get_voltage(supply->reg);
I'm still not clear that the locking is safe here - the notifier is
called with the regulator lock held but regulator_get_voltage() wants to
take that lock. Have you tried this with the various lock debugging
stuff turned on?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable
@ 2021-08-18 12:27 ` Mark Brown
0 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2021-08-18 12:27 UTC (permalink / raw)
To: Jianqun Xu
Cc: lgirdwood, ulf.hansson, lee.jones, zhangchangzhong, heiko,
linux-rockchip, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 384 bytes --]
On Wed, Aug 18, 2021 at 09:09:56AM +0800, Jianqun Xu wrote:
> + } else if (event & REGULATOR_EVENT_ENABLE) {
> + uV = regulator_get_voltage(supply->reg);
I'm still not clear that the locking is safe here - the notifier is
called with the regulator lock held but regulator_get_voltage() wants to
take that lock. Have you tried this with the various lock debugging
stuff turned on?
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-08-18 12:27 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-18 1:09 [PATCH v3] soc: rockchip: io-domain: set 3.3V before regulator disable Jianqun Xu
2021-08-18 1:09 ` Jianqun Xu
2021-08-18 5:11 ` kernel test robot
2021-08-18 5:11 ` kernel test robot
2021-08-18 5:11 ` kernel test robot
2021-08-18 5:56 ` kernel test robot
2021-08-18 5:56 ` kernel test robot
2021-08-18 5:56 ` kernel test robot
2021-08-18 12:27 ` Mark Brown
2021-08-18 12:27 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.