From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
alistair23@gmail.com, Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v11 08/10] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
Date: Thu, 19 Aug 2021 01:44:47 +1000 [thread overview]
Message-ID: <20210818154449.1037-9-alistair@alistair23.me> (raw)
In-Reply-To: <20210818154449.1037-1-alistair@alistair23.me>
Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 41 +++++++++++++++++++++++++
1 file changed, 41 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 052f9da32398..ab2f61d9c635 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -86,6 +86,33 @@ wacom_digitizer: digitizer@9 {
};
};
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ epd_pmic: sy7636a@62 {
+ compatible = "silergy,sy7636a";
+ reg = <0x62>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdpmic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <0>;
+
+ epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ regulators {
+ reg_epdpmic: vcom {
+ regulator-name = "vcom";
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -179,6 +206,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_epdpmic: epdpmicgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
@@ -186,6 +220,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
next prev parent reply other threads:[~2021-08-19 11:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-18 15:44 [PATCH v11 00/10] Add support for the silergy,sy7636a Alistair Francis
2021-08-18 15:44 ` [PATCH v11 01/10] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-08-18 15:44 ` [PATCH v11 02/10] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
2021-08-18 15:44 ` [PATCH v11 03/10] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
2021-08-18 15:44 ` [PATCH v11 04/10] regulator: sy7636a: Remove requirement on sy7636a mfd Alistair Francis
2021-08-18 15:44 ` [PATCH v11 05/10] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
2021-08-18 15:44 ` [PATCH v11 06/10] hwmon: sy7636a: Add temperature " Alistair Francis
2021-08-18 15:44 ` [PATCH v11 07/10] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-08-18 15:44 ` Alistair Francis [this message]
2021-08-18 15:44 ` [PATCH v11 09/10] ARM: imx_v6_v7_defconfig: Enable backlight class devices Alistair Francis
2021-08-18 15:44 ` [PATCH v11 10/10] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
2021-09-17 8:15 ` [PATCH v11 00/10] Add support for the silergy,sy7636a Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210818154449.1037-9-alistair@alistair23.me \
--to=alistair@alistair23.me \
--cc=alistair23@gmail.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.