[PATCH 1/3] ARM: dts: BCM5301X: Fix nodes names

* [PATCH 1/3] ARM: dts: BCM5301X: Fix nodes names
@ 2021-08-19  6:57 ` Rafał Miłecki
  0 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2021-08-19  6:57 UTC (permalink / raw)
  To: Florian Fainelli, Rob Herring
  Cc: Hauke Mehrtens, linux-arm-kernel, devicetree,
	bcm-kernel-feedback-list, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

This fixes following errors for all BCM5301X dts files:
chipcommonA@18000000: $nodename:0: 'chipcommonA@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
mdio-bus-mux@18003000: $nodename:0: 'mdio-bus-mux@18003000' does not match '^mdio-mux[\\-@]?'
dmu@1800c000: $nodename:0: 'dmu@1800c000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +-
 arch/arm/boot/dts/bcm5301x.dtsi                 | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 05d4f2931772..9bef6b9bfa8d 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -129,7 +129,7 @@ bluebar8 {
 		};
 	};
 
-	mdio-bus-mux@18003000 {
+	mdio-mux@18003000 {
 
 		/* BIT(9) = 1 => external mdio */
 		mdio@200 {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index f92089290ccd..f9d3a53065ef 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -19,7 +19,7 @@ / {
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	chipcommonA@18000000 {
+	chipcommon-a-bus@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
 		#address-cells = <1>;
@@ -44,7 +44,7 @@ uart1: serial@400 {
 		};
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -369,7 +369,7 @@ mdio: mdio@18003000 {
 		#address-cells = <1>;
 	};
 
-	mdio-bus-mux@18003000 {
+	mdio-mux@18003000 {
 		compatible = "mdio-mux-mmioreg";
 		mdio-parent-bus = <&mdio>;
 		#address-cells = <1>;
@@ -415,7 +415,7 @@ i2c0: i2c@18009000 {
 		status = "disabled";
 	};
 
-	dmu@1800c000 {
+	dmu-bus@1800c000 {
 		compatible = "simple-bus";
 		ranges = <0 0x1800c000 0x1000>;
 		#address-cells = <1>;
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 12+ messages in thread