From: Jacopo Mondi <jacopo@jmondi.org>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Matt Ranostay <matt.ranostay@konsulko.com>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>, linux-iio@vger.kernel.org
Subject: [PATCH v2 0/3] iio: chemical: Add Senseair Sunrise CO2 sensor
Date: Fri, 20 Aug 2021 15:38:18 +0200 [thread overview]
Message-ID: <20210820133821.159239-1-jacopo@jmondi.org> (raw)
v2 of the driver for Senseair Sunrise 006-0-0007 CO2 sensor.
The driver supports continuous reads of temperature and CO2 concentration
through two dedicated IIO channels. It also supports calibration and error
inspection through the concentration channel ext_info.
Changelog:
v1->v2:
- Add ABI documentation in [3/3]
- [1/3]
- Address Rob's comments on missing maxItem and add device node label
- Do not change the pin's polarity description as suggested by Andy due to
conflicting suggestions
- [2/3]
- Expand Kconfig symbol name and change driver's name as suggested by Andy
- Use regmap instead of raw smbus calls as suggested by Andy
- Take into account minor style comments from Andy
- Install channel's ext_info to support calibration triggering and enumerate
calibration modes and error status
- Matt suggested to use sysfs attributes, but I found the per-channel
attributes more appropriate. Hope this is good as well.
Thanks
j
Jacopo Mondi (3):
dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor
iio: chemical: Add Sensteair Sunrise 006-0-007 driver
iio: ABI: docs: Document Senseair Sunrise ABI
.../sysfs-bus-iio-chemical-sunrise-co2 | 51 ++
.../iio/chemical/senseair,sunrise.yaml | 53 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
drivers/iio/chemical/Kconfig | 10 +
drivers/iio/chemical/Makefile | 1 +
drivers/iio/chemical/sunrise_co2.c | 458 ++++++++++++++++++
7 files changed, 581 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-chemical-sunrise-co2
create mode 100644 Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
create mode 100644 drivers/iio/chemical/sunrise_co2.c
--
2.32.0
next reply other threads:[~2021-08-20 13:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-20 13:38 Jacopo Mondi [this message]
2021-08-20 13:38 ` [PATCH v2 1/3] dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor Jacopo Mondi
2021-08-20 14:22 ` Andy Shevchenko
2021-08-20 19:46 ` Rob Herring
2021-08-22 16:04 ` Jacopo Mondi
2021-08-29 16:07 ` Jonathan Cameron
2021-08-20 13:38 ` [PATCH v2 2/3] iio: chemical: Add Sensteair Sunrise 006-0-007 driver Jacopo Mondi
2021-08-20 14:21 ` Andy Shevchenko
2021-08-20 14:43 ` Jacopo Mondi
2021-08-20 14:56 ` Andy Shevchenko
2021-08-22 15:41 ` Jacopo Mondi
2021-08-20 13:38 ` [PATCH v2 3/3] iio: ABI: docs: Document Senseair Sunrise ABI Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210820133821.159239-1-jacopo@jmondi.org \
--to=jacopo@jmondi.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=matt.ranostay@konsulko.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.