From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
<broonie@kernel.org>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [v5 07/15] iio: adc: aspeed: Set num_channels with model data
Date: Tue, 31 Aug 2021 15:14:50 +0800 [thread overview]
Message-ID: <20210831071458.2334-8-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20210831071458.2334-1-billy_tsai@aspeedtech.com>
Use the model_data member num_channels to set the num_channels of iio
device.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
drivers/iio/adc/aspeed_adc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 01df24f6d3f1..aec335956310 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -299,7 +299,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
indio_dev->info = &aspeed_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = aspeed_adc_iio_channels;
- indio_dev->num_channels = ARRAY_SIZE(aspeed_adc_iio_channels);
+ indio_dev->num_channels = data->model_data->num_channels;
ret = iio_device_register(indio_dev);
if (ret)
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
<p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
<broonie@kernel.org>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [v5 07/15] iio: adc: aspeed: Set num_channels with model data
Date: Tue, 31 Aug 2021 15:14:50 +0800 [thread overview]
Message-ID: <20210831071458.2334-8-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20210831071458.2334-1-billy_tsai@aspeedtech.com>
Use the model_data member num_channels to set the num_channels of iio
device.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
drivers/iio/adc/aspeed_adc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 01df24f6d3f1..aec335956310 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -299,7 +299,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
indio_dev->info = &aspeed_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = aspeed_adc_iio_channels;
- indio_dev->num_channels = ARRAY_SIZE(aspeed_adc_iio_channels);
+ indio_dev->num_channels = data->model_data->num_channels;
ret = iio_device_register(indio_dev);
if (ret)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-31 7:16 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-31 7:14 [v5 00/15] Add support for ast2600 ADC Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:14 ` [v5 01/15] iio: adc: aspeed: set driver data when adc probe Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-09-05 14:25 ` Jonathan Cameron
2021-09-05 14:25 ` Jonathan Cameron
2021-08-31 7:14 ` [v5 02/15] dt-bindings: iio: adc: Add ast2600-adc bindings Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-09-01 1:38 ` Rob Herring
2021-09-01 1:38 ` Rob Herring
2021-09-05 14:27 ` Jonathan Cameron
2021-09-05 14:27 ` Jonathan Cameron
2021-08-31 7:14 ` [v5 03/15] iio: adc: aspeed: completes the bitfield declare Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-09-05 14:30 ` Jonathan Cameron
2021-09-05 14:30 ` Jonathan Cameron
2021-08-31 7:14 ` [v5 04/15] iio: adc: aspeed: Keep model data to driver data Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-09-05 14:33 ` Jonathan Cameron
2021-09-05 14:33 ` Jonathan Cameron
2021-09-05 14:50 ` Jonathan Cameron
2021-09-05 14:50 ` Jonathan Cameron
2021-09-16 3:52 ` Joel Stanley
2021-09-16 3:52 ` Joel Stanley
2021-09-18 17:55 ` Jonathan Cameron
2021-09-18 17:55 ` Jonathan Cameron
2021-08-31 7:14 ` [v5 05/15] iio: adc: aspeed: Refactory model data structure Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-09-05 14:37 ` Jonathan Cameron
2021-09-05 14:37 ` Jonathan Cameron
2021-08-31 7:14 ` [v5 06/15] iio: adc: aspeed: Add vref config function Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:14 ` Billy Tsai [this message]
2021-08-31 7:14 ` [v5 07/15] iio: adc: aspeed: Set num_channels with model data Billy Tsai
2021-08-31 7:14 ` [v5 08/15] iio: adc: aspeed: Use model_data to set clk scaler Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:14 ` [v5 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:51 ` Philipp Zabel
2021-08-31 7:51 ` Philipp Zabel
2021-08-31 7:14 ` [v5 10/15] iio: adc: aspeed: Support ast2600 adc Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:14 ` [v5 11/15] iio: adc: aspeed: Fix the calculate error of clock Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-09-05 14:47 ` Jonathan Cameron
2021-09-05 14:47 ` Jonathan Cameron
2021-08-31 7:14 ` [v5 12/15] iio: adc: aspeed: Add func to set sampling rate Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:14 ` [v5 13/15] iio: adc: aspeed: Add compensation phase Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:14 ` [v5 14/15] iio: adc: aspeed: Support battery sensing Billy Tsai
2021-08-31 7:14 ` Billy Tsai
2021-08-31 7:14 ` [v5 15/15] iio: adc: aspeed: Get and set trimming data Billy Tsai
2021-08-31 7:14 ` Billy Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210831071458.2334-8-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.