From: Zhang Yi <yi.zhang@huawei.com>
To: <linux-ext4@vger.kernel.org>
Cc: <tytso@mit.edu>, <adilger.kernel@dilger.ca>, <jack@suse.cz>,
<yi.zhang@huawei.com>, <yukuai3@huawei.com>
Subject: [PATCH v5 1/3] ext4: factor out ext4_fill_raw_inode()
Date: Wed, 1 Sep 2021 10:09:53 +0800 [thread overview]
Message-ID: <20210901020955.1657340-2-yi.zhang@huawei.com> (raw)
In-Reply-To: <20210901020955.1657340-1-yi.zhang@huawei.com>
Factor out ext4_fill_raw_inode() from ext4_do_update_inode(), which is
use to fill the in-mem inode contents into the inode table buffer, in
preparation for initializing the exclusive inode buffer without reading
the block in __ext4_get_inode_loc().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
---
fs/ext4/inode.c | 85 +++++++++++++++++++++++++++----------------------
1 file changed, 47 insertions(+), 38 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 8323d3e8f393..c7186460c14d 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4902,9 +4902,8 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
return ERR_PTR(ret);
}
-static int ext4_inode_blocks_set(handle_t *handle,
- struct ext4_inode *raw_inode,
- struct ext4_inode_info *ei)
+static int ext4_inode_blocks_set(struct ext4_inode *raw_inode,
+ struct ext4_inode_info *ei)
{
struct inode *inode = &(ei->vfs_inode);
u64 i_blocks = READ_ONCE(inode->i_blocks);
@@ -5007,37 +5006,16 @@ static void ext4_update_other_inodes_time(struct super_block *sb,
rcu_read_unlock();
}
-/*
- * Post the struct inode info into an on-disk inode location in the
- * buffer-cache. This gobbles the caller's reference to the
- * buffer_head in the inode location struct.
- *
- * The caller must have write access to iloc->bh.
- */
-static int ext4_do_update_inode(handle_t *handle,
- struct inode *inode,
- struct ext4_iloc *iloc)
+static int ext4_fill_raw_inode(struct inode *inode, struct ext4_inode *raw_inode)
{
- struct ext4_inode *raw_inode = ext4_raw_inode(iloc);
struct ext4_inode_info *ei = EXT4_I(inode);
- struct buffer_head *bh = iloc->bh;
- struct super_block *sb = inode->i_sb;
- int err = 0, block;
- int need_datasync = 0, set_large_file = 0;
uid_t i_uid;
gid_t i_gid;
projid_t i_projid;
+ int block;
+ int err;
- spin_lock(&ei->i_raw_lock);
-
- /*
- * For fields not tracked in the in-memory inode, initialise them
- * to zero for new inodes.
- */
- if (ext4_test_inode_state(inode, EXT4_STATE_NEW))
- memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size);
-
- err = ext4_inode_blocks_set(handle, raw_inode, ei);
+ err = ext4_inode_blocks_set(raw_inode, ei);
raw_inode->i_mode = cpu_to_le16(inode->i_mode);
i_uid = i_uid_read(inode);
@@ -5079,16 +5057,8 @@ static int ext4_do_update_inode(handle_t *handle,
raw_inode->i_file_acl_high =
cpu_to_le16(ei->i_file_acl >> 32);
raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl);
- if (READ_ONCE(ei->i_disksize) != ext4_isize(inode->i_sb, raw_inode)) {
- ext4_isize_set(raw_inode, ei->i_disksize);
- need_datasync = 1;
- }
- if (ei->i_disksize > 0x7fffffffULL) {
- if (!ext4_has_feature_large_file(sb) ||
- EXT4_SB(sb)->s_es->s_rev_level ==
- cpu_to_le32(EXT4_GOOD_OLD_REV))
- set_large_file = 1;
- }
+ ext4_isize_set(raw_inode, ei->i_disksize);
+
raw_inode->i_generation = cpu_to_le32(inode->i_generation);
if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) {
if (old_valid_dev(inode->i_rdev)) {
@@ -5128,6 +5098,45 @@ static int ext4_do_update_inode(handle_t *handle,
raw_inode->i_projid = cpu_to_le32(i_projid);
ext4_inode_csum_set(inode, raw_inode, ei);
+ return err;
+}
+
+/*
+ * Post the struct inode info into an on-disk inode location in the
+ * buffer-cache. This gobbles the caller's reference to the
+ * buffer_head in the inode location struct.
+ *
+ * The caller must have write access to iloc->bh.
+ */
+static int ext4_do_update_inode(handle_t *handle,
+ struct inode *inode,
+ struct ext4_iloc *iloc)
+{
+ struct ext4_inode *raw_inode = ext4_raw_inode(iloc);
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ struct buffer_head *bh = iloc->bh;
+ struct super_block *sb = inode->i_sb;
+ int err;
+ int need_datasync = 0, set_large_file = 0;
+
+ spin_lock(&ei->i_raw_lock);
+
+ /*
+ * For fields not tracked in the in-memory inode, initialise them
+ * to zero for new inodes.
+ */
+ if (ext4_test_inode_state(inode, EXT4_STATE_NEW))
+ memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size);
+
+ if (READ_ONCE(ei->i_disksize) != ext4_isize(inode->i_sb, raw_inode))
+ need_datasync = 1;
+ if (ei->i_disksize > 0x7fffffffULL) {
+ if (!ext4_has_feature_large_file(sb) ||
+ EXT4_SB(sb)->s_es->s_rev_level == cpu_to_le32(EXT4_GOOD_OLD_REV))
+ set_large_file = 1;
+ }
+
+ err = ext4_fill_raw_inode(inode, raw_inode);
spin_unlock(&ei->i_raw_lock);
if (err) {
EXT4_ERROR_INODE(inode, "corrupted inode contents");
--
2.31.1
next prev parent reply other threads:[~2021-09-01 2:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-01 2:09 [PATCH v5 0/3] ext4: fix a inode checksum error Zhang Yi
2021-09-01 2:09 ` Zhang Yi [this message]
2021-09-20 13:57 ` [PATCH v5 1/3] ext4: factor out ext4_fill_raw_inode() Jan Kara
2021-09-01 2:09 ` [PATCH v5 2/3] ext4: move ext4_fill_raw_inode() related functions Zhang Yi
2021-09-20 13:57 ` Jan Kara
2021-09-01 2:09 ` [PATCH v5 3/3] ext4: prevent getting empty inode buffer Zhang Yi
2021-09-20 13:58 ` Jan Kara
2021-10-14 10:57 ` [PATCH v5 0/3] ext4: fix a inode checksum error Zhang Yi
2021-10-28 14:47 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210901020955.1657340-2-yi.zhang@huawei.com \
--to=yi.zhang@huawei.com \
--cc=adilger.kernel@dilger.ca \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=tytso@mit.edu \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.