[PATCH 4.19 00/33] 4.19.206-rc1 review

[PATCH 4.19 00/33] 4.19.206-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.206 release.
There are 33 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.206-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.206-rc1

Peter Collingbourne <pcc@google.com>
    net: don't unconditionally copy_from_user a struct ifreq for socket ioctls

Denis Efremov <efremov@linux.com>
    Revert "floppy: reintroduce O_NDELAY fix"

Sean Christopherson <seanjc@google.com>
    KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs

George Kennedy <george.kennedy@oracle.com>
    fbmem: add margin check to fb_check_caps()

Linus Torvalds <torvalds@linux-foundation.org>
    vt_kdsetmode: extend console locking

Gerd Rausch <gerd.rausch@oracle.com>
    net/rds: dma_map_sg is entitled to merge entries

Ben Skeggs <bskeggs@redhat.com>
    drm/nouveau/disp: power down unused DP links during init

Mark Yacoub <markyacoub@google.com>
    drm: Copy drm_wait_vblank to user before returning

Shai Malin <smalin@marvell.com>
    qed: Fix null-pointer dereference in qed_rdma_create_qp()

Shai Malin <smalin@marvell.com>
    qed: qed ll2 race condition fixes

Neeraj Upadhyay <neeraju@codeaurora.org>
    vringh: Use wiov->used to check for read/write desc order

Parav Pandit <parav@nvidia.com>
    virtio_pci: Support surprise removal of virtio pci device

Parav Pandit <parav@nvidia.com>
    virtio: Improve vq->broken access to avoid any compiler optimization

Michał Mirosław <mirq-linux@rere.qmqm.pl>
    opp: remove WARN when no valid OPPs remain

Jerome Brunet <jbrunet@baylibre.com>
    usb: gadget: u_audio: fix race condition on endpoint stop

Guangbin Huang <huangguangbin2@huawei.com>
    net: hns3: fix get wrong pfc_en when query PFC configuration

Maxim Kiselev <bigunclemax@gmail.com>
    net: marvell: fix MVNETA_TX_IN_PRGRS bit number

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    xgene-v2: Fix a resource leak in the error handling path of 'xge_probe()'

Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
    ip_gre: add validation for csum_start

Sasha Neftin <sasha.neftin@intel.com>
    e1000e: Fix the max snoop/no-snoop latency for 10M

Tuo Li <islituo@gmail.com>
    IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()

Wesley Cheng <wcheng@codeaurora.org>
    usb: dwc3: gadget: Stop EP0 transfers during pullup disable

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Fix dwc3_calc_trbs_left()

Zhengjun Zhang <zhangzhengjun@aicrobo.com>
    USB: serial: option: add new VID/PID to support Fibocom FG150

Johan Hovold <johan@kernel.org>
    Revert "USB: serial: ch341: fix character loss at high transfer rates"

Stefan Mätje <stefan.maetje@esd.eu>
    can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters

Kefeng Wang <wangkefeng.wang@huawei.com>
    once: Fix panic when module unload

Florian Westphal <fw@strlen.de>
    netfilter: conntrack: collect all entries in one cycle

Guenter Roeck <linux@roeck-us.net>
    ARC: Fix CONFIG_STACKDEPOT

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Fix truncation handling for mod32 dst reg wrt zero

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Fix 32 bit src register truncation on div/mod

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Do not use ax register in interpreter on div/mod

Xiaolong Huang <butterflyhuangxx@gmail.com>
    net: qrtr: fix another OOB Read in qrtr_endpoint_post


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arc/kernel/vmlinux.lds.S                      |  2 +
 arch/x86/kvm/mmu.c                                 | 11 +++-
 drivers/block/floppy.c                             | 27 ++++----
 drivers/gpu/drm/drm_ioc32.c                        |  4 +-
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c      |  2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h      |  1 +
 drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c    |  9 +++
 drivers/infiniband/hw/hfi1/sdma.c                  |  9 ++-
 drivers/net/can/usb/esd_usb2.c                     |  4 +-
 drivers/net/ethernet/apm/xgene-v2/main.c           |  4 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 13 +---
 drivers/net/ethernet/intel/e1000e/ich8lan.c        | 14 ++++-
 drivers/net/ethernet/intel/e1000e/ich8lan.h        |  3 +
 drivers/net/ethernet/marvell/mvneta.c              |  2 +-
 drivers/net/ethernet/qlogic/qed/qed_ll2.c          | 20 ++++++
 drivers/net/ethernet/qlogic/qed/qed_rdma.c         |  3 +-
 drivers/opp/of.c                                   |  5 +-
 drivers/tty/vt/vt_ioctl.c                          | 11 ++--
 drivers/usb/dwc3/gadget.c                          | 23 ++++---
 drivers/usb/gadget/function/u_audio.c              |  5 +-
 drivers/usb/serial/ch341.c                         |  1 -
 drivers/usb/serial/option.c                        |  2 +
 drivers/vhost/vringh.c                             |  2 +-
 drivers/video/fbdev/core/fbmem.c                   |  4 ++
 drivers/virtio/virtio_pci_common.c                 |  7 +++
 drivers/virtio/virtio_ring.c                       |  6 +-
 include/linux/filter.h                             | 24 ++++++++
 include/linux/netdevice.h                          |  4 ++
 include/linux/once.h                               |  4 +-
 kernel/bpf/core.c                                  | 32 +++++-----
 kernel/bpf/verifier.c                              | 27 ++++----
 lib/once.c                                         | 11 +++-
 net/ipv4/ip_gre.c                                  |  2 +
 net/netfilter/nf_conntrack_core.c                  | 71 +++++++---------------
 net/qrtr/qrtr.c                                    |  2 +-
 net/rds/ib_frmr.c                                  |  4 +-
 net/socket.c                                       |  6 +-
 38 files changed, 228 insertions(+), 157 deletions(-)

[PATCH 4.19 01/33] net: qrtr: fix another OOB Read in qrtr_endpoint_post

[Greg Kroah-Hartman]

From: Xiaolong Huang <butterflyhuangxx@gmail.com>

commit 7e78c597c3ebfd0cb329aa09a838734147e4f117 upstream.

This check was incomplete, did not consider size is 0:

	if (len != ALIGN(size, 4) + hdrlen)
                    goto err;

if size from qrtr_hdr is 0, the result of ALIGN(size, 4)
will be 0, In case of len == hdrlen and size == 0
in header this check won't fail and

	if (cb->type == QRTR_TYPE_NEW_SERVER) {
                /* Remote node endpoint can bridge other distant nodes */
                const struct qrtr_ctrl_pkt *pkt = data + hdrlen;

                qrtr_node_assign(node, le32_to_cpu(pkt->server.node));
        }

will also read out of bound from data, which is hdrlen allocated block.

Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Fixes: ad9d24c9429e ("net: qrtr: fix OOB Read in qrtr_endpoint_post")
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/qrtr/qrtr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -321,7 +321,7 @@ int qrtr_endpoint_post(struct qrtr_endpo
 		goto err;
 	}
 
-	if (len != ALIGN(size, 4) + hdrlen)
+	if (!size || len != ALIGN(size, 4) + hdrlen)
 		goto err;
 
 	if (cb->dst_port != QRTR_PORT_CTRL && cb->type != QRTR_TYPE_DATA)

[PATCH 4.19 02/33] bpf: Do not use ax register in interpreter on div/mod

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

Partially undo old commit 144cd91c4c2b ("bpf: move tmp variable into ax
register in interpreter"). The reason we need this here is because ax
register will be used for holding temporary state for div/mod instruction
which otherwise interpreter would corrupt. This will cause a small +8 byte
stack increase for interpreter, but with the gain that we can use it from
verifier rewrites as scratch register.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
[cascardo: This partial revert is needed in order to support using AX for
the following two commits, as there is no JMP32 on 4.19.y]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/core.c |   32 +++++++++++++++-----------------
 1 file changed, 15 insertions(+), 17 deletions(-)

--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -705,9 +705,6 @@ static int bpf_jit_blind_insn(const stru
 	 * below.
 	 *
 	 * Constant blinding is only used by JITs, not in the interpreter.
-	 * The interpreter uses AX in some occasions as a local temporary
-	 * register e.g. in DIV or MOD instructions.
-	 *
 	 * In restricted circumstances, the verifier can also use the AX
 	 * register for rewrites as long as they do not interfere with
 	 * the above cases!
@@ -1057,6 +1054,7 @@ static u64 ___bpf_prog_run(u64 *regs, co
 #undef BPF_INSN_3_LBL
 #undef BPF_INSN_2_LBL
 	u32 tail_call_cnt = 0;
+	u64 tmp;
 
 #define CONT	 ({ insn++; goto select_insn; })
 #define CONT_JMP ({ insn++; goto select_insn; })
@@ -1117,36 +1115,36 @@ select_insn:
 		(*(s64 *) &DST) >>= IMM;
 		CONT;
 	ALU64_MOD_X:
-		div64_u64_rem(DST, SRC, &AX);
-		DST = AX;
+		div64_u64_rem(DST, SRC, &tmp);
+		DST = tmp;
 		CONT;
 	ALU_MOD_X:
-		AX = (u32) DST;
-		DST = do_div(AX, (u32) SRC);
+		tmp = (u32) DST;
+		DST = do_div(tmp, (u32) SRC);
 		CONT;
 	ALU64_MOD_K:
-		div64_u64_rem(DST, IMM, &AX);
-		DST = AX;
+		div64_u64_rem(DST, IMM, &tmp);
+		DST = tmp;
 		CONT;
 	ALU_MOD_K:
-		AX = (u32) DST;
-		DST = do_div(AX, (u32) IMM);
+		tmp = (u32) DST;
+		DST = do_div(tmp, (u32) IMM);
 		CONT;
 	ALU64_DIV_X:
 		DST = div64_u64(DST, SRC);
 		CONT;
 	ALU_DIV_X:
-		AX = (u32) DST;
-		do_div(AX, (u32) SRC);
-		DST = (u32) AX;
+		tmp = (u32) DST;
+		do_div(tmp, (u32) SRC);
+		DST = (u32) tmp;
 		CONT;
 	ALU64_DIV_K:
 		DST = div64_u64(DST, IMM);
 		CONT;
 	ALU_DIV_K:
-		AX = (u32) DST;
-		do_div(AX, (u32) IMM);
-		DST = (u32) AX;
+		tmp = (u32) DST;
+		do_div(tmp, (u32) IMM);
+		DST = (u32) tmp;
 		CONT;
 	ALU_END_TO_BE:
 		switch (IMM) {

[PATCH 4.19 03/33] bpf: Fix 32 bit src register truncation on div/mod

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

Commit e88b2c6e5a4d9ce30d75391e4d950da74bb2bd90 upstream.

While reviewing a different fix, John and I noticed an oddity in one of the
BPF program dumps that stood out, for example:

  # bpftool p d x i 13
   0: (b7) r0 = 808464450
   1: (b4) w4 = 808464432
   2: (bc) w0 = w0
   3: (15) if r0 == 0x0 goto pc+1
   4: (9c) w4 %= w0
  [...]

In line 2 we noticed that the mov32 would 32 bit truncate the original src
register for the div/mod operation. While for the two operations the dst
register is typically marked unknown e.g. from adjust_scalar_min_max_vals()
the src register is not, and thus verifier keeps tracking original bounds,
simplified:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = -1
  1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=invP-1 R1_w=invP-1 R10=fp0
  2: (3c) w0 /= w1
  3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0
  3: (77) r1 >>= 32
  4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0
  4: (bf) r0 = r1
  5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0
  5: (95) exit
  processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0

Runtime result of r0 at exit is 0 instead of expected -1. Remove the
verifier mov32 src rewrite in div/mod and replace it with a jmp32 test
instead. After the fix, we result in the following code generation when
having dividend r1 and divisor r6:

  div, 64 bit:                             div, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (55) if r6 != 0x0 goto pc+2           2: (56) if w6 != 0x0 goto pc+2
   3: (ac) w1 ^= w1                         3: (ac) w1 ^= w1
   4: (05) goto pc+1                        4: (05) goto pc+1
   5: (3f) r1 /= r6                         5: (3c) w1 /= w6
   6: (b7) r0 = 0                           6: (b7) r0 = 0
   7: (95) exit                             7: (95) exit

  mod, 64 bit:                             mod, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (15) if r6 == 0x0 goto pc+1           2: (16) if w6 == 0x0 goto pc+1
   3: (9f) r1 %= r6                         3: (9c) w1 %= w6
   4: (b7) r0 = 0                           4: (b7) r0 = 0
   5: (95) exit                             5: (95) exit

x86 in particular can throw a 'divide error' exception for div
instruction not only for divisor being zero, but also for the case
when the quotient is too large for the designated register. For the
edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT
since we always zero edx (rdx). Hence really the only protection
needed is against divisor being zero.

Fixes: 68fda450a7df ("bpf: fix 32-bit divide by zero")
Co-developed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[Salvatore Bonaccorso: This is an earlier version of the patch provided
by Daniel Borkmann which does not rely on availability of the BPF_JMP32
instruction class. This means it is not even strictly a backport of the
upstream commit mentioned but based on Daniel's and John's work to
address the issue.]
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/filter.h |   24 ++++++++++++++++++++++++
 kernel/bpf/verifier.c  |   22 +++++++++++-----------
 2 files changed, 35 insertions(+), 11 deletions(-)

--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -77,6 +77,14 @@ struct sock_reuseport;
 
 /* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */
 
+#define BPF_ALU_REG(CLASS, OP, DST, SRC)			\
+	((struct bpf_insn) {					\
+		.code  = CLASS | BPF_OP(OP) | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
 #define BPF_ALU64_REG(OP, DST, SRC)				\
 	((struct bpf_insn) {					\
 		.code  = BPF_ALU64 | BPF_OP(OP) | BPF_X,	\
@@ -123,6 +131,14 @@ struct sock_reuseport;
 
 /* Short form of mov, dst_reg = src_reg */
 
+#define BPF_MOV_REG(CLASS, DST, SRC)				\
+	((struct bpf_insn) {					\
+		.code  = CLASS | BPF_MOV | BPF_X,		\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = 0,					\
+		.imm   = 0 })
+
 #define BPF_MOV64_REG(DST, SRC)					\
 	((struct bpf_insn) {					\
 		.code  = BPF_ALU64 | BPF_MOV | BPF_X,		\
@@ -157,6 +173,14 @@ struct sock_reuseport;
 		.off   = 0,					\
 		.imm   = IMM })
 
+#define BPF_RAW_REG(insn, DST, SRC)				\
+	((struct bpf_insn) {					\
+		.code  = (insn).code,				\
+		.dst_reg = DST,					\
+		.src_reg = SRC,					\
+		.off   = (insn).off,				\
+		.imm   = (insn).imm })
+
 /* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
 #define BPF_LD_IMM64(DST, IMM)					\
 	BPF_LD_IMM64_RAW(DST, 0, IMM)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6177,28 +6177,28 @@ static int fixup_bpf_calls(struct bpf_ve
 		    insn->code == (BPF_ALU | BPF_DIV | BPF_X)) {
 			bool is64 = BPF_CLASS(insn->code) == BPF_ALU64;
 			struct bpf_insn mask_and_div[] = {
-				BPF_MOV32_REG(insn->src_reg, insn->src_reg),
+				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
 				/* Rx div 0 -> 0 */
-				BPF_JMP_IMM(BPF_JNE, insn->src_reg, 0, 2),
-				BPF_ALU32_REG(BPF_XOR, insn->dst_reg, insn->dst_reg),
+				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 2),
+				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
 				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
-				*insn,
+				BPF_ALU_REG(BPF_CLASS(insn->code), BPF_XOR, insn->dst_reg, insn->dst_reg),
 			};
 			struct bpf_insn mask_and_mod[] = {
-				BPF_MOV32_REG(insn->src_reg, insn->src_reg),
+				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
 				/* Rx mod 0 -> Rx */
-				BPF_JMP_IMM(BPF_JEQ, insn->src_reg, 0, 1),
-				*insn,
+				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 1),
+				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
 			};
 			struct bpf_insn *patchlet;
 
 			if (insn->code == (BPF_ALU64 | BPF_DIV | BPF_X) ||
 			    insn->code == (BPF_ALU | BPF_DIV | BPF_X)) {
-				patchlet = mask_and_div + (is64 ? 1 : 0);
-				cnt = ARRAY_SIZE(mask_and_div) - (is64 ? 1 : 0);
+				patchlet = mask_and_div;
+				cnt = ARRAY_SIZE(mask_and_div);
 			} else {
-				patchlet = mask_and_mod + (is64 ? 1 : 0);
-				cnt = ARRAY_SIZE(mask_and_mod) - (is64 ? 1 : 0);
+				patchlet = mask_and_mod;
+				cnt = ARRAY_SIZE(mask_and_mod);
 			}
 
 			new_prog = bpf_patch_insn_data(env, i + delta, patchlet, cnt);

[PATCH 4.19 04/33] bpf: Fix truncation handling for mod32 dst reg wrt zero

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

Commit 9b00f1b78809309163dda2d044d9e94a3c0248a3 upstream.

Recently noticed that when mod32 with a known src reg of 0 is performed,
then the dst register is 32-bit truncated in verifier:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = 0
  1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=inv0 R1_w=inv-1 R10=fp0
  2: (b4) w2 = -1
  3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0
  3: (9c) w1 %= w0
  4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  4: (b7) r0 = 1
  5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  5: (1d) if r1 == r2 goto pc+1
   R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: (b7) r0 = 2
  7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  7: (95) exit
  7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0
  7: (95) exit

However, as a runtime result, we get 2 instead of 1, meaning the dst
register does not contain (u32)-1 in this case. The reason is fairly
straight forward given the 0 test leaves the dst register as-is:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+1
   4: (9c) w1 %= w0
   5: (b7) r0 = 1
   6: (1d) if r1 == r2 goto pc+1
   7: (b7) r0 = 2
   8: (95) exit

This was originally not an issue given the dst register was marked as
completely unknown (aka 64 bit unknown). However, after 468f6eafa6c4
("bpf: fix 32-bit ALU op verification") the verifier casts the register
output to 32 bit, and hence it becomes 32 bit unknown. Note that for
the case where the src register is unknown, the dst register is marked
64 bit unknown. After the fix, the register is truncated by the runtime
and the test passes:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+2
   4: (9c) w1 %= w0
   5: (05) goto pc+1
   6: (bc) w1 = w1
   7: (b7) r0 = 1
   8: (1d) if r1 == r2 goto pc+1
   9: (b7) r0 = 2
  10: (95) exit

Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div
has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows:

  mod32:                            mod64:

  (16) if w0 == 0x0 goto pc+2       (15) if r0 == 0x0 goto pc+1
  (9c) w1 %= w0                     (9f) r1 %= r0
  (05) goto pc+1
  (bc) w1 = w1

Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
[Salvatore Bonaccorso: This is an earlier version based on work by
Daniel and John which does not rely on availability of the BPF_JMP32
instruction class. This means it is not even strictly a backport of the
upstream commit mentioned but based on Daniel's and John's work to
address the issue and was finalized by Thadeu Lima de Souza Cascardo.]
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/verifier.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6178,7 +6178,7 @@ static int fixup_bpf_calls(struct bpf_ve
 			bool is64 = BPF_CLASS(insn->code) == BPF_ALU64;
 			struct bpf_insn mask_and_div[] = {
 				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
-				/* Rx div 0 -> 0 */
+				/* [R,W]x div 0 -> 0 */
 				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 2),
 				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
 				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
@@ -6186,9 +6186,10 @@ static int fixup_bpf_calls(struct bpf_ve
 			};
 			struct bpf_insn mask_and_mod[] = {
 				BPF_MOV_REG(BPF_CLASS(insn->code), BPF_REG_AX, insn->src_reg),
-				/* Rx mod 0 -> Rx */
-				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 1),
+				BPF_JMP_IMM(BPF_JEQ, BPF_REG_AX, 0, 1 + (is64 ? 0 : 1)),
 				BPF_RAW_REG(*insn, insn->dst_reg, BPF_REG_AX),
+				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+				BPF_MOV32_REG(insn->dst_reg, insn->dst_reg),
 			};
 			struct bpf_insn *patchlet;
 
@@ -6198,7 +6199,7 @@ static int fixup_bpf_calls(struct bpf_ve
 				cnt = ARRAY_SIZE(mask_and_div);
 			} else {
 				patchlet = mask_and_mod;
-				cnt = ARRAY_SIZE(mask_and_mod);
+				cnt = ARRAY_SIZE(mask_and_mod) - (is64 ? 2 : 0);
 			}
 
 			new_prog = bpf_patch_insn_data(env, i + delta, patchlet, cnt);

[PATCH 4.19 05/33] ARC: Fix CONFIG_STACKDEPOT

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit bf79167fd86f3b97390fe2e70231d383526bd9cc ]

Enabling CONFIG_STACKDEPOT results in the following build error.

arc-elf-ld: lib/stackdepot.o: in function `filter_irq_stacks':
stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'

Other architectures address this problem by adding IRQENTRY_TEXT and
SOFTIRQENTRY_TEXT to the text segment, so do the same here.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/kernel/vmlinux.lds.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index f35ed578e007..4d823d3f65bb 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -92,6 +92,8 @@ SECTIONS
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}
-- 
2.30.2

[PATCH 4.19 06/33] netfilter: conntrack: collect all entries in one cycle

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 4608fdfc07e116f9fc0895beb40abad7cdb5ee3d ]

Michal Kubecek reports that conntrack gc is responsible for frequent
wakeups (every 125ms) on idle systems.

On busy systems, timed out entries are evicted during lookup.
The gc worker is only needed to remove entries after system becomes idle
after a busy period.

To resolve this, always scan the entire table.
If the scan is taking too long, reschedule so other work_structs can run
and resume from next bucket.

After a completed scan, wait for 2 minutes before the next cycle.
Heuristics for faster re-schedule are removed.

GC_SCAN_INTERVAL could be exposed as a sysctl in the future to allow
tuning this as-needed or even turn the gc worker off.

Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_core.c | 71 ++++++++++---------------------
 1 file changed, 22 insertions(+), 49 deletions(-)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index c5590d36b775..a38caf317dbb 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -70,10 +70,9 @@ EXPORT_SYMBOL_GPL(nf_conntrack_hash);
 
 struct conntrack_gc_work {
 	struct delayed_work	dwork;
-	u32			last_bucket;
+	u32			next_bucket;
 	bool			exiting;
 	bool			early_drop;
-	long			next_gc_run;
 };
 
 static __read_mostly struct kmem_cache *nf_conntrack_cachep;
@@ -81,12 +80,8 @@ static __read_mostly spinlock_t nf_conntrack_locks_all_lock;
 static __read_mostly DEFINE_SPINLOCK(nf_conntrack_locks_all_lock);
 static __read_mostly bool nf_conntrack_locks_all;
 
-/* every gc cycle scans at most 1/GC_MAX_BUCKETS_DIV part of table */
-#define GC_MAX_BUCKETS_DIV	128u
-/* upper bound of full table scan */
-#define GC_MAX_SCAN_JIFFIES	(16u * HZ)
-/* desired ratio of entries found to be expired */
-#define GC_EVICT_RATIO	50u
+#define GC_SCAN_INTERVAL	(120u * HZ)
+#define GC_SCAN_MAX_DURATION	msecs_to_jiffies(10)
 
 static struct conntrack_gc_work conntrack_gc_work;
 
@@ -1198,17 +1193,13 @@ static void nf_ct_offload_timeout(struct nf_conn *ct)
 
 static void gc_worker(struct work_struct *work)
 {
-	unsigned int min_interval = max(HZ / GC_MAX_BUCKETS_DIV, 1u);
-	unsigned int i, goal, buckets = 0, expired_count = 0;
-	unsigned int nf_conntrack_max95 = 0;
+	unsigned long end_time = jiffies + GC_SCAN_MAX_DURATION;
+	unsigned int i, hashsz, nf_conntrack_max95 = 0;
+	unsigned long next_run = GC_SCAN_INTERVAL;
 	struct conntrack_gc_work *gc_work;
-	unsigned int ratio, scanned = 0;
-	unsigned long next_run;
-
 	gc_work = container_of(work, struct conntrack_gc_work, dwork.work);
 
-	goal = nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV;
-	i = gc_work->last_bucket;
+	i = gc_work->next_bucket;
 	if (gc_work->early_drop)
 		nf_conntrack_max95 = nf_conntrack_max / 100u * 95u;
 
@@ -1216,22 +1207,21 @@ static void gc_worker(struct work_struct *work)
 		struct nf_conntrack_tuple_hash *h;
 		struct hlist_nulls_head *ct_hash;
 		struct hlist_nulls_node *n;
-		unsigned int hashsz;
 		struct nf_conn *tmp;
 
-		i++;
 		rcu_read_lock();
 
 		nf_conntrack_get_ht(&ct_hash, &hashsz);
-		if (i >= hashsz)
-			i = 0;
+		if (i >= hashsz) {
+			rcu_read_unlock();
+			break;
+		}
 
 		hlist_nulls_for_each_entry_rcu(h, n, &ct_hash[i], hnnode) {
 			struct net *net;
 
 			tmp = nf_ct_tuplehash_to_ctrack(h);
 
-			scanned++;
 			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status)) {
 				nf_ct_offload_timeout(tmp);
 				continue;
@@ -1239,7 +1229,6 @@ static void gc_worker(struct work_struct *work)
 
 			if (nf_ct_is_expired(tmp)) {
 				nf_ct_gc_expired(tmp);
-				expired_count++;
 				continue;
 			}
 
@@ -1271,7 +1260,14 @@ static void gc_worker(struct work_struct *work)
 		 */
 		rcu_read_unlock();
 		cond_resched();
-	} while (++buckets < goal);
+		i++;
+
+		if (time_after(jiffies, end_time) && i < hashsz) {
+			gc_work->next_bucket = i;
+			next_run = 0;
+			break;
+		}
+	} while (i < hashsz);
 
 	if (gc_work->exiting)
 		return;
@@ -1282,40 +1278,17 @@ static void gc_worker(struct work_struct *work)
 	 *
 	 * This worker is only here to reap expired entries when system went
 	 * idle after a busy period.
-	 *
-	 * The heuristics below are supposed to balance conflicting goals:
-	 *
-	 * 1. Minimize time until we notice a stale entry
-	 * 2. Maximize scan intervals to not waste cycles
-	 *
-	 * Normally, expire ratio will be close to 0.
-	 *
-	 * As soon as a sizeable fraction of the entries have expired
-	 * increase scan frequency.
 	 */
-	ratio = scanned ? expired_count * 100 / scanned : 0;
-	if (ratio > GC_EVICT_RATIO) {
-		gc_work->next_gc_run = min_interval;
-	} else {
-		unsigned int max = GC_MAX_SCAN_JIFFIES / GC_MAX_BUCKETS_DIV;
-
-		BUILD_BUG_ON((GC_MAX_SCAN_JIFFIES / GC_MAX_BUCKETS_DIV) == 0);
-
-		gc_work->next_gc_run += min_interval;
-		if (gc_work->next_gc_run > max)
-			gc_work->next_gc_run = max;
+	if (next_run) {
+		gc_work->early_drop = false;
+		gc_work->next_bucket = 0;
 	}
-
-	next_run = gc_work->next_gc_run;
-	gc_work->last_bucket = i;
-	gc_work->early_drop = false;
 	queue_delayed_work(system_power_efficient_wq, &gc_work->dwork, next_run);
 }
 
 static void conntrack_gc_work_init(struct conntrack_gc_work *gc_work)
 {
 	INIT_DEFERRABLE_WORK(&gc_work->dwork, gc_worker);
-	gc_work->next_gc_run = HZ;
 	gc_work->exiting = false;
 }
 
-- 
2.30.2

[PATCH 4.19 07/33] once: Fix panic when module unload

[Greg Kroah-Hartman]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

[ Upstream commit 1027b96ec9d34f9abab69bc1a4dc5b1ad8ab1349 ]

DO_ONCE
DEFINE_STATIC_KEY_TRUE(___once_key);
__do_once_done
  once_disable_jump(once_key);
    INIT_WORK(&w->work, once_deferred);
    struct once_work *w;
    w->key = key;
    schedule_work(&w->work);                     module unload
                                                   //*the key is
destroy*
process_one_work
  once_deferred
    BUG_ON(!static_key_enabled(work->key));
       static_key_count((struct static_key *)x)    //*access key, crash*

When module uses DO_ONCE mechanism, it could crash due to the above
concurrency problem, we could reproduce it with link[1].

Fix it by add/put module refcount in the once work process.

[1] https://lore.kernel.org/netdev/eaa6c371-465e-57eb-6be9-f4b16b9d7cbf@huawei.com/

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Reported-by: Minmin chen <chenmingmin@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/once.h |  4 ++--
 lib/once.c           | 11 ++++++++---
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/include/linux/once.h b/include/linux/once.h
index 9225ee6d96c7..ae6f4eb41cbe 100644
--- a/include/linux/once.h
+++ b/include/linux/once.h
@@ -7,7 +7,7 @@
 
 bool __do_once_start(bool *done, unsigned long *flags);
 void __do_once_done(bool *done, struct static_key_true *once_key,
-		    unsigned long *flags);
+		    unsigned long *flags, struct module *mod);
 
 /* Call a function exactly once. The idea of DO_ONCE() is to perform
  * a function call such as initialization of random seeds, etc, only
@@ -46,7 +46,7 @@ void __do_once_done(bool *done, struct static_key_true *once_key,
 			if (unlikely(___ret)) {				     \
 				func(__VA_ARGS__);			     \
 				__do_once_done(&___done, &___once_key,	     \
-					       &___flags);		     \
+					       &___flags, THIS_MODULE);	     \
 			}						     \
 		}							     \
 		___ret;							     \
diff --git a/lib/once.c b/lib/once.c
index 8b7d6235217e..59149bf3bfb4 100644
--- a/lib/once.c
+++ b/lib/once.c
@@ -3,10 +3,12 @@
 #include <linux/spinlock.h>
 #include <linux/once.h>
 #include <linux/random.h>
+#include <linux/module.h>
 
 struct once_work {
 	struct work_struct work;
 	struct static_key_true *key;
+	struct module *module;
 };
 
 static void once_deferred(struct work_struct *w)
@@ -16,10 +18,11 @@ static void once_deferred(struct work_struct *w)
 	work = container_of(w, struct once_work, work);
 	BUG_ON(!static_key_enabled(work->key));
 	static_branch_disable(work->key);
+	module_put(work->module);
 	kfree(work);
 }
 
-static void once_disable_jump(struct static_key_true *key)
+static void once_disable_jump(struct static_key_true *key, struct module *mod)
 {
 	struct once_work *w;
 
@@ -29,6 +32,8 @@ static void once_disable_jump(struct static_key_true *key)
 
 	INIT_WORK(&w->work, once_deferred);
 	w->key = key;
+	w->module = mod;
+	__module_get(mod);
 	schedule_work(&w->work);
 }
 
@@ -53,11 +58,11 @@ bool __do_once_start(bool *done, unsigned long *flags)
 EXPORT_SYMBOL(__do_once_start);
 
 void __do_once_done(bool *done, struct static_key_true *once_key,
-		    unsigned long *flags)
+		    unsigned long *flags, struct module *mod)
 	__releases(once_lock)
 {
 	*done = true;
 	spin_unlock_irqrestore(&once_lock, *flags);
-	once_disable_jump(once_key);
+	once_disable_jump(once_key, mod);
 }
 EXPORT_SYMBOL(__do_once_done);
-- 
2.30.2

[PATCH 4.19 08/33] can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters

[Greg Kroah-Hartman]

From: Stefan Mätje <stefan.maetje@esd.eu>

commit 044012b52029204900af9e4230263418427f4ba4 upstream.

This patch fixes the interchanged fetch of the CAN RX and TX error
counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter
is really in struct rx_msg::data[2] and the TX error counter is in
struct rx_msg::data[3].

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/esd_usb2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -236,8 +236,8 @@ static void esd_usb2_rx_event(struct esd
 	if (id == ESD_EV_CAN_ERROR_EXT) {
 		u8 state = msg->msg.rx.data[0];
 		u8 ecc = msg->msg.rx.data[1];
-		u8 txerr = msg->msg.rx.data[2];
-		u8 rxerr = msg->msg.rx.data[3];
+		u8 rxerr = msg->msg.rx.data[2];
+		u8 txerr = msg->msg.rx.data[3];
 
 		skb = alloc_can_err_skb(priv->netdev, &cf);
 		if (skb == NULL) {

[PATCH 4.19 09/33] Revert "USB: serial: ch341: fix character loss at high transfer rates"

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit df7b16d1c00ecb3da3a30c999cdb39f273c99a2f upstream.

This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b.

These devices do not appear to send a zero-length packet when the
transfer size is a multiple of the bulk-endpoint max-packet size. This
means that incoming data may not be processed by the driver until a
short packet is received or the receive buffer is full.

Revert back to using endpoint-sized receive buffers to avoid stalled
reads.

Reported-by: Paul Größel <pb.g@gmx.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131
Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates")
Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ch341.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -625,7 +625,6 @@ static struct usb_serial_driver ch341_de
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
-	.bulk_in_size      = 512,
 	.id_table          = id_table,
 	.num_ports         = 1,
 	.open              = ch341_open,

[PATCH 4.19 10/33] USB: serial: option: add new VID/PID to support Fibocom FG150

[Greg Kroah-Hartman]

From: Zhengjun Zhang <zhangzhengjun@aicrobo.com>

commit 2829a4e3cf3a6ac2fa3cdb681b37574630fb9c1a upstream.

Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.

Here are the outputs of lsusb -v and usb-devices:

> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=2cb7 ProdID=010b Rev=04.14
> S:  Manufacturer=Fibocom
> S:  Product=Fibocom Modem_SN:XXXXXXXX
> S:  SerialNumber=XXXXXXXX
> C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I:  If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               3.20
>   bDeviceClass            0
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         9
>   idVendor           0x2cb7 Fibocom
>   idProduct          0x010b
>   bcdDevice            4.14
>   iManufacturer           1 Fibocom
>   iProduct                2 Fibocom Modem_SN:XXXXXXXX
>   iSerial                 3 XXXXXXXX
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength       0x00e6
>     bNumInterfaces          5
>     bConfigurationValue     1
>     iConfiguration          4 RNDIS_DUN_DIAG_ADB
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              896mA
>     Interface Association:
>       bLength                 8
>       bDescriptorType        11
>       bFirstInterface         0
>       bInterfaceCount         2
>       bFunctionClass        239 Miscellaneous Device
>       bFunctionSubClass       4
>       bFunctionProtocol       1
>       iFunction               7 RNDIS
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass       239 Miscellaneous Device
>       bInterfaceSubClass      4
>       bInterfaceProtocol      1
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 01
>       ** UNRECOGNIZED:  04 24 02 00
>       ** UNRECOGNIZED:  05 24 06 00 01
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval               9
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        1
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass        10 CDC Data
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x8e  EP 14 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x0f  EP 15 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        2
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 00
>       ** UNRECOGNIZED:  04 24 02 02
>       ** UNRECOGNIZED:  05 24 06 00 00
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x83  EP 3 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x000a  1x 10 bytes
>         bInterval               9
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        3
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol     48
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x84  EP 4 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        4
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass     66
>       bInterfaceProtocol      1
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x03  EP 3 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x85  EP 5 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
> Binary Object Store Descriptor:
>   bLength                 5
>   bDescriptorType        15
>   wTotalLength       0x0016
>   bNumDeviceCaps          2
>   USB 2.0 Extension Device Capability:
>     bLength                 7
>     bDescriptorType        16
>     bDevCapabilityType      2
>     bmAttributes   0x00000006
>       BESL Link Power Management (LPM) Supported
>   SuperSpeed USB Device Capability:
>     bLength                10
>     bDescriptorType        16
>     bDevCapabilityType      3
>     bmAttributes         0x00
>     wSpeedsSupported   0x000f
>       Device can operate at Low Speed (1Mbps)
>       Device can operate at Full Speed (12Mbps)
>       Device can operate at High Speed (480Mbps)
>       Device can operate at SuperSpeed (5Gbps)
>     bFunctionalitySupport   1
>       Lowest fully-functional device speed is Full Speed (12Mbps)
>     bU1DevExitLat           1 micro seconds
>     bU2DevExitLat         500 micro seconds
> Device Status:     0x0000
>   (Bus Powered)

Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2074,6 +2074,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */

[PATCH 4.19 11/33] usb: dwc3: gadget: Fix dwc3_calc_trbs_left()

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 51f1954ad853d01ba4dc2b35dee14d8490ee05a1 upstream.

We can't depend on the TRB's HWO bit to determine if the TRB ring is
"full". A TRB is only available when the driver had processed it, not
when the controller consumed and relinquished the TRB's ownership to the
driver. Otherwise, the driver may overwrite unprocessed TRBs. This can
happen when many transfer events accumulate and the system is slow to
process them and/or when there are too many small requests.

If a request is in the started_list, that means there is one or more
unprocessed TRBs remained. Check this instead of the TRB's HWO bit
whether the TRB ring is full.

Fixes: c4233573f6ee ("usb: dwc3: gadget: prepare TRBs on update transfers too")
Cc: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -894,19 +894,19 @@ static struct dwc3_trb *dwc3_ep_prev_trb
 
 static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
 {
-	struct dwc3_trb		*tmp;
 	u8			trbs_left;
 
 	/*
-	 * If enqueue & dequeue are equal than it is either full or empty.
-	 *
-	 * One way to know for sure is if the TRB right before us has HWO bit
-	 * set or not. If it has, then we're definitely full and can't fit any
-	 * more transfers in our ring.
+	 * If the enqueue & dequeue are equal then the TRB ring is either full
+	 * or empty. It's considered full when there are DWC3_TRB_NUM-1 of TRBs
+	 * pending to be processed by the driver.
 	 */
 	if (dep->trb_enqueue == dep->trb_dequeue) {
-		tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
-		if (tmp->ctrl & DWC3_TRB_CTRL_HWO)
+		/*
+		 * If there is any request remained in the started_list at
+		 * this point, that means there is no TRB available.
+		 */
+		if (!list_empty(&dep->started_list))
 			return 0;
 
 		return DWC3_TRB_NUM - 1;

[PATCH 4.19 12/33] usb: dwc3: gadget: Stop EP0 transfers during pullup disable

[Greg Kroah-Hartman]

From: Wesley Cheng <wcheng@codeaurora.org>

commit 4a1e25c0a029b97ea4a3d423a6392bfacc3b2e39 upstream.

During a USB cable disconnect, or soft disconnect scenario, a pending
SETUP transaction may not be completed, leading to the following
error:

    dwc3 a600000.dwc3: timed out waiting for SETUP phase

If this occurs, then the entire pullup disable routine is skipped and
proper cleanup and halting of the controller does not complete.

Instead of returning an error (which is ignored from the UDC
perspective), allow the pullup disable routine to continue, which
will also handle disabling of EP0/1.  This will end any active
transfers as well.  Ensure to clear any delayed_status also, as the
timeout could happen within the STATUS stage.

Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so")
Cc: <stable@vger.kernel.org>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1805,10 +1805,8 @@ static int dwc3_gadget_pullup(struct usb
 
 		ret = wait_for_completion_timeout(&dwc->ep0_in_setup,
 				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
-		if (ret == 0) {
-			dev_err(dwc->dev, "timed out waiting for SETUP phase\n");
-			return -ETIMEDOUT;
-		}
+		if (ret == 0)
+			dev_warn(dwc->dev, "timed out waiting for SETUP phase\n");
 	}
 
 	spin_lock_irqsave(&dwc->lock, flags);
@@ -1946,6 +1944,7 @@ static int __dwc3_gadget_start(struct dw
 	/* begin to receive SETUP packets */
 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc->link_state = DWC3_LINK_STATE_SS_DIS;
+	dwc->delayed_status = false;
 	dwc3_ep0_out_start(dwc);
 
 	dwc3_gadget_enable_irq(dwc);

[PATCH 4.19 13/33] IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()

[Greg Kroah-Hartman]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit cbe71c61992c38f72c2b625b2ef25916b9f0d060 ]

kmalloc_array() is called to allocate memory for tx->descp. If it fails,
the function __sdma_txclean() is called:
  __sdma_txclean(dd, tx);

However, in the function __sdma_txclean(), tx-descp is dereferenced if
tx->num_desc is not zero:
  sdma_unmap_desc(dd, &tx->descp[0]);

To fix this possible null-pointer dereference, assign the return value of
kmalloc_array() to a local variable descp, and then assign it to tx->descp
if it is not NULL. Otherwise, go to enomem.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/sdma.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c
index 291c12f588b5..38258de75a94 100644
--- a/drivers/infiniband/hw/hfi1/sdma.c
+++ b/drivers/infiniband/hw/hfi1/sdma.c
@@ -3055,6 +3055,7 @@ static void __sdma_process_event(struct sdma_engine *sde,
 static int _extend_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
 {
 	int i;
+	struct sdma_desc *descp;
 
 	/* Handle last descriptor */
 	if (unlikely((tx->num_desc == (MAX_DESC - 1)))) {
@@ -3075,12 +3076,10 @@ static int _extend_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
 	if (unlikely(tx->num_desc == MAX_DESC))
 		goto enomem;
 
-	tx->descp = kmalloc_array(
-			MAX_DESC,
-			sizeof(struct sdma_desc),
-			GFP_ATOMIC);
-	if (!tx->descp)
+	descp = kmalloc_array(MAX_DESC, sizeof(struct sdma_desc), GFP_ATOMIC);
+	if (!descp)
 		goto enomem;
+	tx->descp = descp;
 
 	/* reserve last descriptor for coalescing */
 	tx->desc_limit = MAX_DESC - 1;
-- 
2.30.2

[PATCH 4.19 14/33] e1000e: Fix the max snoop/no-snoop latency for 10M

[Greg Kroah-Hartman]

From: Sasha Neftin <sasha.neftin@intel.com>

[ Upstream commit 44a13a5d99c71bf9e1676d9e51679daf4d7b3d73 ]

We should decode the latency and the max_latency before directly compare.
The latency should be presented as lat_enc = scale x value:
lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00)
>> 10)))

Fixes: cf8fb73c23aa ("e1000e: add support for LTR on I217/I218")
Suggested-by: Yee Li <seven.yi.lee@gmail.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 14 +++++++++++++-
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  3 +++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 7998a73b6a0f..fbad77450725 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -995,6 +995,8 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
 {
 	u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
 	    link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
+	u16 max_ltr_enc_d = 0;	/* maximum LTR decoded by platform */
+	u16 lat_enc_d = 0;	/* latency decoded */
 	u16 lat_enc = 0;	/* latency encoded */
 
 	if (link) {
@@ -1048,7 +1050,17 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
 				     E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop);
 		max_ltr_enc = max_t(u16, max_snoop, max_nosnoop);
 
-		if (lat_enc > max_ltr_enc)
+		lat_enc_d = (lat_enc & E1000_LTRV_VALUE_MASK) *
+			     (1U << (E1000_LTRV_SCALE_FACTOR *
+			     ((lat_enc & E1000_LTRV_SCALE_MASK)
+			     >> E1000_LTRV_SCALE_SHIFT)));
+
+		max_ltr_enc_d = (max_ltr_enc & E1000_LTRV_VALUE_MASK) *
+				 (1U << (E1000_LTRV_SCALE_FACTOR *
+				 ((max_ltr_enc & E1000_LTRV_SCALE_MASK)
+				 >> E1000_LTRV_SCALE_SHIFT)));
+
+		if (lat_enc_d > max_ltr_enc_d)
 			lat_enc = max_ltr_enc;
 	}
 
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 1502895eb45d..e757896287eb 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -274,8 +274,11 @@
 
 /* Latency Tolerance Reporting */
 #define E1000_LTRV			0x000F8
+#define E1000_LTRV_VALUE_MASK		0x000003FF
 #define E1000_LTRV_SCALE_MAX		5
 #define E1000_LTRV_SCALE_FACTOR		5
+#define E1000_LTRV_SCALE_SHIFT		10
+#define E1000_LTRV_SCALE_MASK		0x00001C00
 #define E1000_LTRV_REQ_SHIFT		15
 #define E1000_LTRV_NOSNOOP_SHIFT	16
 #define E1000_LTRV_SEND			(1 << 30)
-- 
2.30.2

[PATCH 4.19 15/33] ip_gre: add validation for csum_start

[Greg Kroah-Hartman]

From: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>

[ Upstream commit 1d011c4803c72f3907eccfc1ec63caefb852fcbf ]

Validate csum_start in gre_handle_offloads before we call _gre_xmit so
that we do not crash later when the csum_start value is used in the
lco_csum function call.

This patch deals with ipv4 code.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_gre.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index de6f89511a21..a8a37d112820 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -449,6 +449,8 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
 
 static int gre_handle_offloads(struct sk_buff *skb, bool csum)
 {
+	if (csum && skb_checksum_start(skb) < skb->data)
+		return -EINVAL;
 	return iptunnel_handle_offloads(skb, csum ? SKB_GSO_GRE_CSUM : SKB_GSO_GRE);
 }
 
-- 
2.30.2

[PATCH 4.19 16/33] xgene-v2: Fix a resource leak in the error handling path of xge_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 5ed74b03eb4d08f5dd281dcb5f1c9bb92b363a8d ]

A successful 'xge_mdio_config()' call should be balanced by a corresponding
'xge_mdio_remove()' call in the error handling path of the probe, as
already done in the remove function.

Update the error handling path accordingly.

Fixes: ea8ab16ab225 ("drivers: net: xgene-v2: Add MDIO support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/apm/xgene-v2/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/apm/xgene-v2/main.c b/drivers/net/ethernet/apm/xgene-v2/main.c
index 0f2ad50f3bd7..7f37e7cb687e 100644
--- a/drivers/net/ethernet/apm/xgene-v2/main.c
+++ b/drivers/net/ethernet/apm/xgene-v2/main.c
@@ -691,11 +691,13 @@ static int xge_probe(struct platform_device *pdev)
 	ret = register_netdev(ndev);
 	if (ret) {
 		netdev_err(ndev, "Failed to register netdev\n");
-		goto err;
+		goto err_mdio_remove;
 	}
 
 	return 0;
 
+err_mdio_remove:
+	xge_mdio_remove(ndev);
 err:
 	free_netdev(ndev);
 
-- 
2.30.2

[PATCH 4.19 17/33] net: marvell: fix MVNETA_TX_IN_PRGRS bit number

[Greg Kroah-Hartman]

From: Maxim Kiselev <bigunclemax@gmail.com>

[ Upstream commit 359f4cdd7d78fdf8c098713b05fee950a730f131 ]

According to Armada XP datasheet bit at 0 position is corresponding for
TxInProg indication.

Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index fda5dd8c71eb..382d010e1294 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -100,7 +100,7 @@
 #define      MVNETA_DESC_SWAP                    BIT(6)
 #define      MVNETA_TX_BRST_SZ_MASK(burst)       ((burst) << 22)
 #define MVNETA_PORT_STATUS                       0x2444
-#define      MVNETA_TX_IN_PRGRS                  BIT(1)
+#define      MVNETA_TX_IN_PRGRS                  BIT(0)
 #define      MVNETA_TX_FIFO_EMPTY                BIT(8)
 #define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
 #define MVNETA_SERDES_CFG			 0x24A0
-- 
2.30.2

[PATCH 4.19 18/33] net: hns3: fix get wrong pfc_en when query PFC configuration

[Greg Kroah-Hartman]

From: Guangbin Huang <huangguangbin2@huawei.com>

[ Upstream commit 8c1671e0d13d4a0ba4fb3a0da932bf3736d7ff73 ]

Currently, when query PFC configuration by dcbtool, driver will return
PFC enable status based on TC. As all priorities are mapped to TC0 by
default, if TC0 is enabled, then all priorities mapped to TC0 will be
shown as enabled status when query PFC setting, even though some
priorities have never been set.

for example:
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off
$ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on

To fix this problem, just returns user's PFC config parameter saved in
driver.

Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c  | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index a75d7c826fc2..dd935cd1fb44 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -204,21 +204,12 @@ static int hclge_ieee_getpfc(struct hnae3_handle *h, struct ieee_pfc *pfc)
 	u64 requests[HNAE3_MAX_TC], indications[HNAE3_MAX_TC];
 	struct hclge_vport *vport = hclge_get_vport(h);
 	struct hclge_dev *hdev = vport->back;
-	u8 i, j, pfc_map, *prio_tc;
 	int ret;
+	u8 i;
 
 	memset(pfc, 0, sizeof(*pfc));
 	pfc->pfc_cap = hdev->pfc_max;
-	prio_tc = hdev->tm_info.prio_tc;
-	pfc_map = hdev->tm_info.hw_pfc_map;
-
-	/* Pfc setting is based on TC */
-	for (i = 0; i < hdev->tm_info.num_tc; i++) {
-		for (j = 0; j < HNAE3_MAX_USER_PRIO; j++) {
-			if ((prio_tc[j] == i) && (pfc_map & BIT(i)))
-				pfc->pfc_en |= BIT(j);
-		}
-	}
+	pfc->pfc_en = hdev->tm_info.pfc_en;
 
 	ret = hclge_pfc_tx_stats_get(hdev, requests);
 	if (ret)
-- 
2.30.2

[PATCH 4.19 19/33] usb: gadget: u_audio: fix race condition on endpoint stop

[Greg Kroah-Hartman]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 068fdad20454f815e61e6f6eb9f051a8b3120e88 ]

If the endpoint completion callback is call right after the ep_enabled flag
is cleared and before usb_ep_dequeue() is call, we could do a double free
on the request and the associated buffer.

Fix this by clearing ep_enabled after all the endpoint requests have been
dequeued.

Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/u_audio.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index 0cb0c638fd13..168303f21bf4 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -349,8 +349,6 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
 	if (!prm->ep_enabled)
 		return;
 
-	prm->ep_enabled = false;
-
 	audio_dev = uac->audio_dev;
 	params = &audio_dev->params;
 
@@ -368,11 +366,12 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
 		}
 	}
 
+	prm->ep_enabled = false;
+
 	if (usb_ep_disable(ep))
 		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
 }
 
-
 int u_audio_start_capture(struct g_audio *audio_dev)
 {
 	struct snd_uac_chip *uac = audio_dev->uac;
-- 
2.30.2

[PATCH 4.19 20/33] opp: remove WARN when no valid OPPs remain

[Greg Kroah-Hartman]

From: Michał Mirosław <mirq-linux@rere.qmqm.pl>

[ Upstream commit 335ffab3ef864539e814b9a2903b0ae420c1c067 ]

This WARN can be triggered per-core and the stack trace is not useful.
Replace it with plain dev_err(). Fix a comment while at it.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/opp/of.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index d64a13d7881b..a53123356697 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -423,8 +423,9 @@ static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
 		}
 	}
 
-	/* There should be one of more OPP defined */
-	if (WARN_ON(!count)) {
+	/* There should be one or more OPPs defined */
+	if (!count) {
+		dev_err(dev, "%s: no supported OPPs", __func__);
 		ret = -ENOENT;
 		goto put_opp_table;
 	}
-- 
2.30.2

[PATCH 4.19 21/33] virtio: Improve vq->broken access to avoid any compiler optimization

[Greg Kroah-Hartman]

From: Parav Pandit <parav@nvidia.com>

[ Upstream commit 60f0779862e4ab943810187752c462e85f5fa371 ]

Currently vq->broken field is read by virtqueue_is_broken() in busy
loop in one context by virtnet_send_command().

vq->broken is set to true in other process context by
virtio_break_device(). Reader and writer are accessing it without any
synchronization. This may lead to a compiler optimization which may
result to optimize reading vq->broken only once.

Hence, force reading vq->broken on each invocation of
virtqueue_is_broken() and also force writing it so that such
update is visible to the readers.

It is a theoretical fix that isn't yet encountered in the field.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210721142648.1525924-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_ring.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index df7980aef927..0cc0cfd3a3cb 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1197,7 +1197,7 @@ bool virtqueue_is_broken(struct virtqueue *_vq)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
-	return vq->broken;
+	return READ_ONCE(vq->broken);
 }
 EXPORT_SYMBOL_GPL(virtqueue_is_broken);
 
@@ -1211,7 +1211,9 @@ void virtio_break_device(struct virtio_device *dev)
 
 	list_for_each_entry(_vq, &dev->vqs, list) {
 		struct vring_virtqueue *vq = to_vvq(_vq);
-		vq->broken = true;
+
+		/* Pairs with READ_ONCE() in virtqueue_is_broken(). */
+		WRITE_ONCE(vq->broken, true);
 	}
 }
 EXPORT_SYMBOL_GPL(virtio_break_device);
-- 
2.30.2

[PATCH 4.19 22/33] virtio_pci: Support surprise removal of virtio pci device

[Greg Kroah-Hartman]

From: Parav Pandit <parav@nvidia.com>

[ Upstream commit 43bb40c5b92659966bdf4bfe584fde0a3575a049 ]

When a virtio pci device undergo surprise removal (aka async removal in
PCIe spec), mark the device as broken so that any upper layer drivers can
abort any outstanding operation.

When a virtio net pci device undergo surprise removal which is used by a
NetworkManager, a below call trace was observed.

kernel:watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:1:27059]
watchdog: BUG: soft lockup - CPU#1 stuck for 52s! [kworker/1:1:27059]
CPU: 1 PID: 27059 Comm: kworker/1:1 Tainted: G S      W I  L    5.13.0-hotplug+ #8
Hardware name: Dell Inc. PowerEdge R640/0H28RR, BIOS 2.9.4 11/06/2020
Workqueue: events linkwatch_event
RIP: 0010:virtnet_send_command+0xfc/0x150 [virtio_net]
Call Trace:
 virtnet_set_rx_mode+0xcf/0x2a7 [virtio_net]
 ? __hw_addr_create_ex+0x85/0xc0
 __dev_mc_add+0x72/0x80
 igmp6_group_added+0xa7/0xd0
 ipv6_mc_up+0x3c/0x60
 ipv6_find_idev+0x36/0x80
 addrconf_add_dev+0x1e/0xa0
 addrconf_dev_config+0x71/0x130
 addrconf_notify+0x1f5/0xb40
 ? rtnl_is_locked+0x11/0x20
 ? __switch_to_asm+0x42/0x70
 ? finish_task_switch+0xaf/0x2c0
 ? raw_notifier_call_chain+0x3e/0x50
 raw_notifier_call_chain+0x3e/0x50
 netdev_state_change+0x67/0x90
 linkwatch_do_dev+0x3c/0x50
 __linkwatch_run_queue+0xd2/0x220
 linkwatch_event+0x21/0x30
 process_one_work+0x1c8/0x370
 worker_thread+0x30/0x380
 ? process_one_work+0x370/0x370
 kthread+0x118/0x140
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30

Hence, add the ability to abort the command on surprise removal
which prevents infinite loop and system lockup.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210721142648.1525924-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_pci_common.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
index 45b04bc91f24..b7cc63f556ee 100644
--- a/drivers/virtio/virtio_pci_common.c
+++ b/drivers/virtio/virtio_pci_common.c
@@ -579,6 +579,13 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
 	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
 	struct device *dev = get_device(&vp_dev->vdev.dev);
 
+	/*
+	 * Device is marked broken on surprise removal so that virtio upper
+	 * layers can abort any ongoing operation.
+	 */
+	if (!pci_device_is_present(pci_dev))
+		virtio_break_device(&vp_dev->vdev);
+
 	pci_disable_sriov(pci_dev);
 
 	unregister_virtio_device(&vp_dev->vdev);
-- 
2.30.2

[PATCH 4.19 23/33] vringh: Use wiov->used to check for read/write desc order

[Greg Kroah-Hartman]

From: Neeraj Upadhyay <neeraju@codeaurora.org>

[ Upstream commit e74cfa91f42c50f7f649b0eca46aa049754ccdbd ]

As __vringh_iov() traverses a descriptor chain, it populates
each descriptor entry into either read or write vring iov
and increments that iov's ->used member. So, as we iterate
over a descriptor chain, at any point, (riov/wriov)->used
value gives the number of descriptor enteries available,
which are to be read or written by the device. As all read
iovs must precede the write iovs, wiov->used should be zero
when we are traversing a read descriptor. Current code checks
for wiov->i, to figure out whether any previous entry in the
current descriptor chain was a write descriptor. However,
iov->i is only incremented, when these vring iovs are consumed,
at a later point, and remain 0 in __vringh_iov(). So, correct
the check for read and write descriptor order, to use
wiov->used.

Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Link: https://lore.kernel.org/r/1624591502-4827-1-git-send-email-neeraju@codeaurora.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vringh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c
index 59c61744dcc1..97aa9b87e572 100644
--- a/drivers/vhost/vringh.c
+++ b/drivers/vhost/vringh.c
@@ -330,7 +330,7 @@ __vringh_iov(struct vringh *vrh, u16 i,
 			iov = wiov;
 		else {
 			iov = riov;
-			if (unlikely(wiov && wiov->i)) {
+			if (unlikely(wiov && wiov->used)) {
 				vringh_bad("Readable desc %p after writable",
 					   &descs[i]);
 				err = -EINVAL;
-- 
2.30.2

[PATCH 4.19 24/33] qed: qed ll2 race condition fixes

[Greg Kroah-Hartman]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit 37110237f31105d679fc0aa7b11cdec867750ea7 ]

Avoiding qed ll2 race condition and NULL pointer dereference as part
of the remove and recovery flows.

Changes form V1:
- Change (!p_rx->set_prod_addr).
- qed_ll2.c checkpatch fixes.

Change from V2:
- Revert "qed_ll2.c checkpatch fixes".

Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_ll2.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index 2847509a183d..cb3569ac85f7 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -354,6 +354,9 @@ static int qed_ll2_txq_completion(struct qed_hwfn *p_hwfn, void *p_cookie)
 	unsigned long flags;
 	int rc = -EINVAL;
 
+	if (!p_ll2_conn)
+		return rc;
+
 	spin_lock_irqsave(&p_tx->lock, flags);
 	if (p_tx->b_completing_packet) {
 		rc = -EBUSY;
@@ -527,7 +530,16 @@ static int qed_ll2_rxq_completion(struct qed_hwfn *p_hwfn, void *cookie)
 	unsigned long flags = 0;
 	int rc = 0;
 
+	if (!p_ll2_conn)
+		return rc;
+
 	spin_lock_irqsave(&p_rx->lock, flags);
+
+	if (!QED_LL2_RX_REGISTERED(p_ll2_conn)) {
+		spin_unlock_irqrestore(&p_rx->lock, flags);
+		return 0;
+	}
+
 	cq_new_idx = le16_to_cpu(*p_rx->p_fw_cons);
 	cq_old_idx = qed_chain_get_cons_idx(&p_rx->rcq_chain);
 
@@ -848,6 +860,9 @@ static int qed_ll2_lb_rxq_completion(struct qed_hwfn *p_hwfn, void *p_cookie)
 	struct qed_ll2_info *p_ll2_conn = (struct qed_ll2_info *)p_cookie;
 	int rc;
 
+	if (!p_ll2_conn)
+		return 0;
+
 	if (!QED_LL2_RX_REGISTERED(p_ll2_conn))
 		return 0;
 
@@ -871,6 +886,9 @@ static int qed_ll2_lb_txq_completion(struct qed_hwfn *p_hwfn, void *p_cookie)
 	u16 new_idx = 0, num_bds = 0;
 	int rc;
 
+	if (!p_ll2_conn)
+		return 0;
+
 	if (!QED_LL2_TX_REGISTERED(p_ll2_conn))
 		return 0;
 
@@ -1628,6 +1646,8 @@ int qed_ll2_post_rx_buffer(void *cxt,
 	if (!p_ll2_conn)
 		return -EINVAL;
 	p_rx = &p_ll2_conn->rx_queue;
+	if (!p_rx->set_prod_addr)
+		return -EIO;
 
 	spin_lock_irqsave(&p_rx->lock, flags);
 	if (!list_empty(&p_rx->free_descq))
-- 
2.30.2

[PATCH 4.19 25/33] qed: Fix null-pointer dereference in qed_rdma_create_qp()

[Greg Kroah-Hartman]

From: Shai Malin <smalin@marvell.com>

[ Upstream commit d33d19d313d3466abdf8b0428be7837aff767802 ]

Fix a possible null-pointer dereference in qed_rdma_create_qp().

Changes from V2:
- Revert checkpatch fixes.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_rdma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 909422d93903..3392982ff374 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -1244,8 +1244,7 @@ qed_rdma_create_qp(void *rdma_cxt,
 
 	if (!rdma_cxt || !in_params || !out_params ||
 	    !p_hwfn->p_rdma_info->active) {
-		DP_ERR(p_hwfn->cdev,
-		       "qed roce create qp failed due to NULL entry (rdma_cxt=%p, in=%p, out=%p, roce_info=?\n",
+		pr_err("qed roce create qp failed due to NULL entry (rdma_cxt=%p, in=%p, out=%p, roce_info=?\n",
 		       rdma_cxt, in_params, out_params);
 		return NULL;
 	}
-- 
2.30.2

[PATCH 4.19 26/33] drm: Copy drm_wait_vblank to user before returning

[Greg Kroah-Hartman]

From: Mark Yacoub <markyacoub@google.com>

[ Upstream commit fa0b1ef5f7a694f48e00804a391245f3471aa155 ]

[Why]
Userspace should get back a copy of drm_wait_vblank that's been modified
even when drm_wait_vblank_ioctl returns a failure.

Rationale:
drm_wait_vblank_ioctl modifies the request and expects the user to read
it back. When the type is RELATIVE, it modifies it to ABSOLUTE and updates
the sequence to become current_vblank_count + sequence (which was
RELATIVE), but now it became ABSOLUTE.
drmWaitVBlank (in libdrm) expects this to be the case as it modifies
the request to be Absolute so it expects the sequence to would have been
updated.

The change is in compat_drm_wait_vblank, which is called by
drm_compat_ioctl. This change of copying the data back regardless of the
return number makes it en par with drm_ioctl, which always copies the
data before returning.

[How]
Return from the function after everything has been copied to user.

Fixes IGT:kms_flip::modeset-vs-vblank-race-interruptible
Tested on ChromeOS Trogdor(msm)

Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812194917.1703356-1-markyacoub@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_ioc32.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c
index ab8847c7dd96..87e13bcd7a67 100644
--- a/drivers/gpu/drm/drm_ioc32.c
+++ b/drivers/gpu/drm/drm_ioc32.c
@@ -855,8 +855,6 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd,
 	req.request.sequence = req32.request.sequence;
 	req.request.signal = req32.request.signal;
 	err = drm_ioctl_kernel(file, drm_wait_vblank_ioctl, &req, DRM_UNLOCKED);
-	if (err)
-		return err;
 
 	req32.reply.type = req.reply.type;
 	req32.reply.sequence = req.reply.sequence;
@@ -865,7 +863,7 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd,
 	if (copy_to_user(argp, &req32, sizeof(req32)))
 		return -EFAULT;
 
-	return 0;
+	return err;
 }
 
 #if defined(CONFIG_X86)
-- 
2.30.2

[PATCH 4.19 27/33] drm/nouveau/disp: power down unused DP links during init

[Greg Kroah-Hartman]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 6eaa1f3c59a707332e921e32782ffcad49915c5e ]

When booted with multiple displays attached, the EFI GOP driver on (at
least) Ampere, can leave DP links powered up that aren't being used to
display anything.  This confuses our tracking of SOR routing, with the
likely result being a failed modeset and display engine hang.

Fix this by (ab?)using the DisableLT IED script to power-down the link,
restoring HW to a state the driver expects.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c   | 2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h   | 1 +
 drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c | 9 +++++++++
 3 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
index 818d21bd28d3..1d2837c5a8f2 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
@@ -419,7 +419,7 @@ nvkm_dp_train(struct nvkm_dp *dp, u32 dataKBps)
 	return ret;
 }
 
-static void
+void
 nvkm_dp_disable(struct nvkm_outp *outp, struct nvkm_ior *ior)
 {
 	struct nvkm_dp *dp = nvkm_dp(outp);
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h
index 495f665a0ee6..12d6ff4cfa95 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.h
@@ -32,6 +32,7 @@ struct nvkm_dp {
 
 int nvkm_dp_new(struct nvkm_disp *, int index, struct dcb_output *,
 		struct nvkm_outp **);
+void nvkm_dp_disable(struct nvkm_outp *, struct nvkm_ior *);
 
 /* DPCD Receiver Capabilities */
 #define DPCD_RC00_DPCD_REV                                              0x00000
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c
index c62030c96fba..4b1c72fd8f03 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c
@@ -22,6 +22,7 @@
  * Authors: Ben Skeggs
  */
 #include "outp.h"
+#include "dp.h"
 #include "ior.h"
 
 #include <subdev/bios.h>
@@ -216,6 +217,14 @@ nvkm_outp_init_route(struct nvkm_outp *outp)
 	if (!ior->arm.head || ior->arm.proto != proto) {
 		OUTP_DBG(outp, "no heads (%x %d %d)", ior->arm.head,
 			 ior->arm.proto, proto);
+
+		/* The EFI GOP driver on Ampere can leave unused DP links routed,
+		 * which we don't expect.  The DisableLT IED script *should* get
+		 * us back to where we need to be.
+		 */
+		if (ior->func->route.get && !ior->arm.head && outp->info.type == DCB_OUTPUT_DP)
+			nvkm_dp_disable(outp, ior);
+
 		return;
 	}
 
-- 
2.30.2

[PATCH 4.19 28/33] net/rds: dma_map_sg is entitled to merge entries

[Greg Kroah-Hartman]

From: Gerd Rausch <gerd.rausch@oracle.com>

[ Upstream commit fb4b1373dcab086d0619c29310f0466a0b2ceb8a ]

Function "dma_map_sg" is entitled to merge adjacent entries
and return a value smaller than what was passed as "nents".

Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len")
rather than the original "nents" parameter ("sg_len").

This old RDS bug was exposed and reliably causes kernel panics
(using RDMA operations "rds-stress -D") on x86_64 starting with:
commit c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")

Simply put: Linux 5.11 and later.

Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/60efc69f-1f35-529d-a7ef-da0549cad143@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/ib_frmr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/rds/ib_frmr.c b/net/rds/ib_frmr.c
index 6431a023ac89..46988c009a3e 100644
--- a/net/rds/ib_frmr.c
+++ b/net/rds/ib_frmr.c
@@ -111,9 +111,9 @@ static int rds_ib_post_reg_frmr(struct rds_ib_mr *ibmr)
 		cpu_relax();
 	}
 
-	ret = ib_map_mr_sg_zbva(frmr->mr, ibmr->sg, ibmr->sg_len,
+	ret = ib_map_mr_sg_zbva(frmr->mr, ibmr->sg, ibmr->sg_dma_len,
 				&off, PAGE_SIZE);
-	if (unlikely(ret != ibmr->sg_len))
+	if (unlikely(ret != ibmr->sg_dma_len))
 		return ret < 0 ? ret : -EINVAL;
 
 	/* Perform a WR for the fast_reg_mr. Each individual page
-- 
2.30.2

[PATCH 4.19 29/33] vt_kdsetmode: extend console locking

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 2287a51ba822384834dafc1c798453375d1107c7 upstream.

As per the long-suffering comment.

Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -484,16 +484,19 @@ int vt_ioctl(struct tty_struct *tty,
 			ret = -EINVAL;
 			goto out;
 		}
-		/* FIXME: this needs the console lock extending */
-		if (vc->vc_mode == (unsigned char) arg)
+		console_lock();
+		if (vc->vc_mode == (unsigned char) arg) {
+			console_unlock();
 			break;
+		}
 		vc->vc_mode = (unsigned char) arg;
-		if (console != fg_console)
+		if (console != fg_console) {
+			console_unlock();
 			break;
+		}
 		/*
 		 * explicitly blank/unblank the screen if switching modes
 		 */
-		console_lock();
 		if (arg == KD_TEXT)
 			do_unblank_screen(1);
 		else

[PATCH 4.19 30/33] fbmem: add margin check to fb_check_caps()

[Greg Kroah-Hartman]

From: George Kennedy <george.kennedy@oracle.com>

commit a49145acfb975d921464b84fe00279f99827d816 upstream.

A fb_ioctl() FBIOPUT_VSCREENINFO call with invalid xres setting
or yres setting in struct fb_var_screeninfo will result in a
KASAN: vmalloc-out-of-bounds failure in bitfill_aligned() as
the margins are being cleared. The margins are cleared in
chunks and if the xres setting or yres setting is a value of
zero upto the chunk size, the failure will occur.

Add a margin check to validate xres and yres settings.

Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1594149963-13801-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/core/fbmem.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -991,6 +991,10 @@ fb_set_var(struct fb_info *info, struct
 			goto done;
 		}
 
+		/* bitfill_aligned() assumes that it's at least 8x8 */
+		if (var->xres < 8 || var->yres < 8)
+			return -EINVAL;
+
 		ret = info->fbops->fb_check_var(var, info);
 
 		if (ret)

[PATCH 4.19 31/33] KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 112022bdb5bc372e00e6e43cb88ee38ea67b97bd upstream

Mark NX as being used for all non-nested shadow MMUs, as KVM will set the
NX bit for huge SPTEs if the iTLB mutli-hit mitigation is enabled.
Checking the mitigation itself is not sufficient as it can be toggled on
at any time and KVM doesn't reset MMU contexts when that happens.  KVM
could reset the contexts, but that would require purging all SPTEs in all
MMUs, for no real benefit.  And, KVM already forces EFER.NX=1 when TDP is
disabled (for WP=0, SMEP=1, NX=0), so technically NX is never reserved
for shadow MMUs.

Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sudip: use old path and adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/mmu.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -4557,7 +4557,16 @@ static void reset_rsvds_bits_mask_ept(st
 void
 reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context)
 {
-	bool uses_nx = context->nx || context->base_role.smep_andnot_wp;
+	/*
+	 * KVM uses NX when TDP is disabled to handle a variety of scenarios,
+	 * notably for huge SPTEs if iTLB multi-hit mitigation is enabled and
+	 * to generate correct permissions for CR0.WP=0/CR4.SMEP=1/EFER.NX=0.
+	 * The iTLB multi-hit workaround can be toggled at any time, so assume
+	 * NX can be used by any non-nested shadow MMU to avoid having to reset
+	 * MMU contexts.  Note, KVM forces EFER.NX=1 when TDP is disabled.
+	 */
+	bool uses_nx = context->nx || !tdp_enabled ||
+		context->base_role.smep_andnot_wp;
 	struct rsvd_bits_validate *shadow_zero_check;
 	int i;
 

[PATCH 4.19 32/33] Revert "floppy: reintroduce O_NDELAY fix"

[Greg Kroah-Hartman]

From: Denis Efremov <efremov@linux.com>

commit c7e9d0020361f4308a70cdfd6d5335e273eb8717 upstream.

The patch breaks userspace implementations (e.g. fdutils) and introduces
regressions in behaviour. Previously, it was possible to O_NDELAY open a
floppy device with no media inserted or with write protected media without
an error. Some userspace tools use this particular behavior for probing.

It's not the first time when we revert this patch. Previous revert is in
commit f2791e7eadf4 (Revert "floppy: refactor open() flags handling").

This reverts commit 8a0c014cd20516ade9654fc13b51345ec58e7be8.

Link: https://lore.kernel.org/linux-block/de10cb47-34d1-5a88-7751-225ca380f735@compro.net/
Reported-by: Mark Hounschell <markh@compro.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wim Osterholt <wim@djo.tudelft.nl>
Cc: Kurt Garloff <kurt@garloff.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/floppy.c |   27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4074,22 +4074,21 @@ static int floppy_open(struct block_devi
 	if (UFDCS->rawcmd == 1)
 		UFDCS->rawcmd = 2;
 
-	if (mode & (FMODE_READ|FMODE_WRITE)) {
-		UDRS->last_checked = 0;
-		clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags);
-		check_disk_change(bdev);
-		if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
-			goto out;
-		if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags))
+	if (!(mode & FMODE_NDELAY)) {
+		if (mode & (FMODE_READ|FMODE_WRITE)) {
+			UDRS->last_checked = 0;
+			clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags);
+			check_disk_change(bdev);
+			if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
+				goto out;
+			if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags))
+				goto out;
+		}
+		res = -EROFS;
+		if ((mode & FMODE_WRITE) &&
+		    !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
 			goto out;
 	}
-
-	res = -EROFS;
-
-	if ((mode & FMODE_WRITE) &&
-			!test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
-		goto out;
-
 	mutex_unlock(&open_lock);
 	mutex_unlock(&floppy_mutex);
 	return 0;

[PATCH 4.19 33/33] net: dont unconditionally copy_from_user a struct ifreq for socket ioctls

[Greg Kroah-Hartman]

From: Peter Collingbourne <pcc@google.com>

commit d0efb16294d145d157432feda83877ae9d7cdf37 upstream.

A common implementation of isatty(3) involves calling a ioctl passing
a dummy struct argument and checking whether the syscall failed --
bionic and glibc use TCGETS (passing a struct termios), and musl uses
TIOCGWINSZ (passing a struct winsize). If the FD is a socket, we will
copy sizeof(struct ifreq) bytes of data from the argument and return
-EFAULT if that fails. The result is that the isatty implementations
may return a non-POSIX-compliant value in errno in the case where part
of the dummy struct argument is inaccessible, as both struct termios
and struct winsize are smaller than struct ifreq (at least on arm64).

Although there is usually enough stack space following the argument
on the stack that this did not present a practical problem up to now,
with MTE stack instrumentation it's more likely for the copy to fail,
as the memory following the struct may have a different tag.

Fix the problem by adding an early check for whether the ioctl is a
valid socket ioctl, and return -ENOTTY if it isn't.

Fixes: 44c02a2c3dc5 ("dev_ioctl(): move copyin/copyout to callers")
Link: https://linux-review.googlesource.com/id/I869da6cf6daabc3e4b7b82ac979683ba05e27d4d
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/netdevice.h |    4 ++++
 net/socket.c              |    6 +++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -3594,6 +3594,10 @@ int netdev_rx_handler_register(struct ne
 void netdev_rx_handler_unregister(struct net_device *dev);
 
 bool dev_valid_name(const char *name);
+static inline bool is_socket_ioctl_cmd(unsigned int cmd)
+{
+	return _IOC_TYPE(cmd) == SOCK_IOC_TYPE;
+}
 int dev_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr,
 		bool *need_copyout);
 int dev_ifconf(struct net *net, struct ifconf *, int);
--- a/net/socket.c
+++ b/net/socket.c
@@ -1030,7 +1030,7 @@ static long sock_do_ioctl(struct net *ne
 		rtnl_unlock();
 		if (!err && copy_to_user(argp, &ifc, sizeof(struct ifconf)))
 			err = -EFAULT;
-	} else {
+	} else if (is_socket_ioctl_cmd(cmd)) {
 		struct ifreq ifr;
 		bool need_copyout;
 		if (copy_from_user(&ifr, argp, sizeof(struct ifreq)))
@@ -1039,6 +1039,8 @@ static long sock_do_ioctl(struct net *ne
 		if (!err && need_copyout)
 			if (copy_to_user(argp, &ifr, sizeof(struct ifreq)))
 				return -EFAULT;
+	} else {
+		err = -ENOTTY;
 	}
 	return err;
 }
@@ -3064,6 +3066,8 @@ static int compat_ifr_data_ioctl(struct
 	struct ifreq ifreq;
 	u32 data32;
 
+	if (!is_socket_ioctl_cmd(cmd))
+		return -ENOTTY;
 	if (copy_from_user(ifreq.ifr_name, u_ifreq32->ifr_name, IFNAMSIZ))
 		return -EFAULT;
 	if (get_user(data32, &u_ifreq32->ifr_data))

Re: [PATCH 4.19 00/33] 4.19.206-rc1 review

[Jon Hunter]

On Wed, 01 Sep 2021 14:27:49 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.206 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.206-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:
    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	4.19.206-rc1-gfc1fd7aed81d
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.19 00/33] 4.19.206-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 663 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.206 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 00/33] 4.19.206-rc1 review

[Shuah Khan]

On 9/1/21 6:27 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.206 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.206-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/33] 4.19.206-rc1 review

[Samuel Zou]

On 2021/9/1 20:27, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.206 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.206-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.206-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.206-rc1
Commit: 0ec64a47cbb11f5919e47cdab83f201ea5ca6076
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8859
passed: 8859
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8859
passed: 8859
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 4.19 00/33] 4.19.206-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Wed, Sep 01, 2021 at 02:27:49PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.206 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210816): 63 configs -> no failure
arm (gcc version 11.1.1 20210816): 116 configs -> no new failure
arm64 (gcc version 11.1.1 20210816): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/78


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 4.19 00/33] 4.19.206-rc1 review

[Naresh Kamboju]

On Wed, 1 Sept 2021 at 18:00, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.206 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.206-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.206-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: fc1fd7aed81d18bc92d0e096033e11161cea98aa
* git describe: v4.19.205-34-gfc1fd7aed81d
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.205-34-gfc1fd7aed81d

## No regressions (compared to v4.19.205-20-g0ec64a47cbb1)

## No fixes (compared to v4.19.205-20-g0ec64a47cbb1)

## Test result summary
total: 80130, pass: 64266, fail: 784, skip: 13234, xfail: 1846

## Build Summary
* arm: 98 total, 98 passed, 0 failed
* arm64: 34 total, 34 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 41 total, 41 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 18 total, 18 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/33] 4.19.206-rc1 review

[Guenter Roeck]

On Wed, Sep 01, 2021 at 02:27:49PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.206 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 03 Sep 2021 12:22:41 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 438 pass: 438 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter