From: Conor Walsh <conor.walsh@intel.com>
To: bruce.richardson@intel.com, fengchengwen@huawei.com,
jerinj@marvell.com, kevin.laatz@intel.com
Cc: dev@dpdk.org, Conor Walsh <conor.walsh@intel.com>
Subject: [dpdk-dev] [PATCH v2 00/10] dma: add dmadev driver for ioat devices
Date: Fri, 3 Sep 2021 11:17:24 +0000 [thread overview]
Message-ID: <20210903111734.2734545-1-conor.walsh@intel.com> (raw)
In-Reply-To: <20210827172550.1522362-1-conor.walsh@intel.com>
This patchset adds a dmadev driver and associated documentation to support
Intel QuickData Technology devices, part of the Intel I/O Acceleration
Technology (Intel I/OAT). This driver is intended to ultimately replace
the current IOAT part of the IOAT rawdev driver
NOTE: This patchset has several dependencies:
- v19 of the dmadev set [1]
- v2 of the dmadev test suite [2]
- v2 of the IDXD driver [3]
[1] http://patches.dpdk.org/project/dpdk/list/?series=18629
[2] http://patches.dpdk.org/project/dpdk/list/?series=18607
[3] http://patches.dpdk.org/project/dpdk/list/?series=18658
---
v2:
- Rebased on the above patchsets.
- Added support for the vchan idle function.
- Stop function now suspends IOAT channel to allow for reconfig.
- dmadev_autotest can now be run multiple times using the IOAT driver
without errors.
- Added devbind updates for DMA devices
- Removed some logically dead code found by coverity in the
create function.
Conor Walsh (10):
dma/ioat: add device probe and removal functions
dma/ioat: create dmadev instances on PCI probe
dma/ioat: add datapath structures
dma/ioat: add configuration functions
dma/ioat: add start and stop functions
dma/ioat: add data path job submission functions
dma/ioat: add data path completion functions
dma/ioat: add statistics
dma/ioat: add support for vchan idle function
devbind: move ioat device ID for ICX to dmadev category
MAINTAINERS | 6 +
doc/guides/dmadevs/index.rst | 1 +
doc/guides/dmadevs/ioat.rst | 214 ++++++++
doc/guides/rel_notes/release_21_11.rst | 7 +-
drivers/dma/ioat/ioat_dmadev.c | 694 +++++++++++++++++++++++++
drivers/dma/ioat/ioat_hw_defs.h | 294 +++++++++++
drivers/dma/ioat/ioat_internal.h | 44 ++
drivers/dma/ioat/meson.build | 7 +
drivers/dma/ioat/version.map | 3 +
drivers/dma/meson.build | 1 +
usertools/dpdk-devbind.py | 5 +-
11 files changed, 1270 insertions(+), 6 deletions(-)
create mode 100644 doc/guides/dmadevs/ioat.rst
create mode 100644 drivers/dma/ioat/ioat_dmadev.c
create mode 100644 drivers/dma/ioat/ioat_hw_defs.h
create mode 100644 drivers/dma/ioat/ioat_internal.h
create mode 100644 drivers/dma/ioat/meson.build
create mode 100644 drivers/dma/ioat/version.map
--
2.25.1
next prev parent reply other threads:[~2021-09-03 11:17 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-27 17:25 [dpdk-dev] [PATCH 0/8] dma: add dmadev driver for ioat devices Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 1/8] dma/ioat: add device probe and removal functions Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 2/8] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 3/8] dma/ioat: add datapath structures Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 4/8] dma/ioat: add configuration functions Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 5/8] dma/ioat: add start and stop functions Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 6/8] dma/ioat: add data path job submission functions Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 7/8] dma/ioat: add data path completion functions Conor Walsh
2021-08-27 17:25 ` [dpdk-dev] [PATCH 8/8] dma/ioat: add statistics Conor Walsh
2021-09-03 11:17 ` Conor Walsh [this message]
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 01/10] dma/ioat: add device probe and removal functions Conor Walsh
2021-09-07 10:10 ` Kevin Laatz
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 02/10] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-09-07 10:11 ` Kevin Laatz
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 03/10] dma/ioat: add datapath structures Conor Walsh
2021-09-07 10:11 ` Kevin Laatz
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 04/10] dma/ioat: add configuration functions Conor Walsh
2021-09-07 10:11 ` Kevin Laatz
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 05/10] dma/ioat: add start and stop functions Conor Walsh
2021-09-07 10:11 ` Kevin Laatz
2021-09-07 10:35 ` Walsh, Conor
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 06/10] dma/ioat: add data path job submission functions Conor Walsh
2021-09-07 10:12 ` Kevin Laatz
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 07/10] dma/ioat: add data path completion functions Conor Walsh
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 08/10] dma/ioat: add statistics Conor Walsh
2021-09-07 10:12 ` Kevin Laatz
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 09/10] dma/ioat: add support for vchan idle function Conor Walsh
2021-09-07 10:12 ` Kevin Laatz
2021-09-03 11:17 ` [dpdk-dev] [PATCH v2 10/10] devbind: move ioat device ID for ICX to dmadev category Conor Walsh
2021-09-07 10:10 ` Kevin Laatz
2021-09-08 10:39 ` [dpdk-dev] [PATCH v3 00/11] dma: add dmadev driver for ioat devices Conor Walsh
2021-09-08 10:39 ` [dpdk-dev] [PATCH v3 01/11] dma/ioat: add device probe and removal functions Conor Walsh
2021-09-08 10:39 ` [dpdk-dev] [PATCH v3 02/11] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-09-08 10:39 ` [dpdk-dev] [PATCH v3 03/11] dma/ioat: add datapath structures Conor Walsh
2021-09-08 10:39 ` [dpdk-dev] [PATCH v3 04/11] dma/ioat: add configuration functions Conor Walsh
2021-09-08 10:39 ` [dpdk-dev] [PATCH v3 05/11] dma/ioat: add start and stop functions Conor Walsh
2021-09-08 10:39 ` [dpdk-dev] [PATCH v3 06/11] dma/ioat: add data path job submission functions Conor Walsh
2021-09-08 10:40 ` [dpdk-dev] [PATCH v3 07/11] dma/ioat: add data path completion functions Conor Walsh
2021-09-08 10:40 ` [dpdk-dev] [PATCH v3 08/11] dma/ioat: add statistics Conor Walsh
2021-09-08 10:40 ` [dpdk-dev] [PATCH v3 09/11] dma/ioat: add support for vchan status function Conor Walsh
2021-09-08 10:40 ` [dpdk-dev] [PATCH v3 10/11] dma/ioat: add burst capacity function Conor Walsh
2021-09-08 10:40 ` [dpdk-dev] [PATCH v3 11/11] devbind: move ioat device ID for ICX to dmadev category Conor Walsh
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 00/11] dma: add dmadev driver for ioat devices Conor Walsh
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 01/11] dma/ioat: add device probe and removal functions Conor Walsh
2021-09-20 11:15 ` Bruce Richardson
2021-09-21 16:24 ` Conor Walsh
2021-09-22 3:59 ` fengchengwen
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 02/11] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-09-20 13:31 ` Bruce Richardson
2021-09-21 16:25 ` Conor Walsh
2021-09-22 8:04 ` fengchengwen
2021-09-22 16:40 ` Conor Walsh
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 03/11] dma/ioat: add datapath structures Conor Walsh
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 04/11] dma/ioat: add configuration functions Conor Walsh
2021-09-22 8:08 ` fengchengwen
2021-09-22 16:41 ` Conor Walsh
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 05/11] dma/ioat: add start and stop functions Conor Walsh
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 06/11] dma/ioat: add data path job submission functions Conor Walsh
2021-09-20 13:36 ` Bruce Richardson
2021-09-21 16:25 ` Conor Walsh
2021-09-22 8:18 ` fengchengwen
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 07/11] dma/ioat: add data path completion functions Conor Walsh
2021-09-20 13:39 ` Bruce Richardson
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 08/11] dma/ioat: add statistics Conor Walsh
2021-09-20 13:48 ` Bruce Richardson
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 09/11] dma/ioat: add support for vchan status function Conor Walsh
2021-09-20 13:49 ` Bruce Richardson
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 10/11] dma/ioat: add burst capacity function Conor Walsh
2021-09-20 13:49 ` Bruce Richardson
2021-09-17 15:42 ` [dpdk-dev] [PATCH v4 11/11] devbind: move ioat device ID for ICX to dmadev category Conor Walsh
2021-09-20 13:53 ` Bruce Richardson
2021-09-21 16:26 ` Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 00/12] dma: add dmadev driver for ioat devices Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 01/12] dma/ioat: add device probe and removal functions Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 02/12] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 03/12] dma/ioat: add datapath structures Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 04/12] dma/ioat: add configuration functions Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 05/12] dma/ioat: add start and stop functions Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 06/12] dma/ioat: add data path job submission functions Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 07/12] dma/ioat: add data path completion functions Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 08/12] dma/ioat: add statistics Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 09/12] dma/ioat: add support for vchan status function Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 10/12] dma/ioat: add burst capacity function Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 11/12] devbind: move ioat device IDs to dmadev category Conor Walsh
2021-09-24 14:33 ` [dpdk-dev] [PATCH v5 12/12] raw/ioat: deprecate ioat rawdev driver Conor Walsh
2021-09-24 16:21 ` Kevin Laatz
2021-09-24 16:56 ` Bruce Richardson
2021-09-27 9:36 ` Walsh, Conor
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 00/12] dma: add dmadev driver for ioat devices Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 01/12] dma/ioat: add device probe and removal functions Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 02/12] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 03/12] dma/ioat: add datapath structures Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 04/12] dma/ioat: add configuration functions Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 05/12] dma/ioat: add start and stop functions Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 06/12] dma/ioat: add data path job submission functions Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 07/12] dma/ioat: add data path completion functions Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 08/12] dma/ioat: add statistics Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 09/12] dma/ioat: add support for vchan status function Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 10/12] dma/ioat: add burst capacity function Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 11/12] devbind: move ioat device IDs to dmadev category Conor Walsh
2021-09-27 10:21 ` [dpdk-dev] [PATCH v6 12/12] raw/ioat: deprecate ioat rawdev driver Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 00/12] dma: add dmadev driver for ioat devices Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 01/12] dma/ioat: add device probe and removal functions Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 02/12] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 03/12] dma/ioat: add datapath structures Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 04/12] dma/ioat: add configuration functions Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 05/12] dma/ioat: add start and stop functions Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 06/12] dma/ioat: add data path job submission functions Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 07/12] dma/ioat: add data path completion functions Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 08/12] dma/ioat: add statistics Conor Walsh
2021-10-14 9:48 ` [dpdk-dev] [PATCH v7 09/12] dma/ioat: add support for vchan status function Conor Walsh
2021-10-14 9:49 ` [dpdk-dev] [PATCH v7 10/12] dma/ioat: add burst capacity function Conor Walsh
2021-10-14 9:49 ` [dpdk-dev] [PATCH v7 11/12] devbind: move ioat device IDs to dmadev category Conor Walsh
2021-10-14 9:49 ` [dpdk-dev] [PATCH v7 12/12] raw/ioat: deprecate ioat rawdev driver Conor Walsh
2021-10-18 7:54 ` Thomas Monjalon
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 00/12] dma: add dmadev driver for ioat devices Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 01/12] dma/ioat: add device probe and removal functions Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 02/12] dma/ioat: create dmadev instances on PCI probe Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 03/12] dma/ioat: add datapath structures Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 04/12] dma/ioat: add configuration functions Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 05/12] dma/ioat: add start and stop functions Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 06/12] dma/ioat: add data path job submission functions Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 07/12] dma/ioat: add data path completion functions Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 08/12] dma/ioat: add statistics Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 09/12] dma/ioat: add support for vchan status function Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 10/12] dma/ioat: add burst capacity function Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 11/12] devbind: move ioat device IDs to dmadev category Conor Walsh
2021-10-18 12:38 ` [dpdk-dev] [PATCH v8 12/12] raw/ioat: deprecate ioat rawdev driver Conor Walsh
2021-10-19 11:28 ` [dpdk-dev] [PATCH v8 00/12] dma: add dmadev driver for ioat devices Walsh, Conor
2021-10-19 14:23 ` Walsh, Conor
2021-10-20 16:35 ` Walsh, Conor
2021-10-22 19:25 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210903111734.2734545-1-conor.walsh@intel.com \
--to=conor.walsh@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=fengchengwen@huawei.com \
--cc=jerinj@marvell.com \
--cc=kevin.laatz@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.