All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Zijlstra <peterz@infradead.org>
To: tglx@linutronix.de, boqun.feng@gmail.com
Cc: linux-kernel@vger.kernel.org, peterz@infradead.org,
	Ingo Molnar <mingo@kernel.org>,
	Juri Lelli <juri.lelli@redhat.com>,
	Steven Rostedt <rostedt@goodmis.org>,
	Davidlohr Bueso <dave@stgolabs.net>,
	Will Deacon <will@kernel.org>, Waiman Long <longman@redhat.com>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Mike Galbraith <efault@gmx.de>,
	Daniel Bristot de Oliveira <bristot@redhat.com>
Subject: [PATCH 3/4] locking/rwbase: Fix rwbase_write_lock() vs __rwbase_read_lock()
Date: Thu, 09 Sep 2021 12:59:18 +0200	[thread overview]
Message-ID: <20210909110203.893845303@infradead.org> (raw)
In-Reply-To: 20210909105915.757320973@infradead.org

Boqun noticed that the write-trylock sequence of load+set is broken in
rwbase_write_lock()'s wait-loop since they're not both under the same
wait_lock instance.

Restructure the code to make this more obvious and correct.

Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 kernel/locking/rwbase_rt.c |   44 ++++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 18 deletions(-)

--- a/kernel/locking/rwbase_rt.c
+++ b/kernel/locking/rwbase_rt.c
@@ -196,6 +196,19 @@ static inline void rwbase_write_downgrad
 	__rwbase_write_unlock(rwb, WRITER_BIAS - 1, flags);
 }
 
+static inline bool __rwbase_write_trylock(struct rwbase_rt *rwb)
+{
+	/* Can do without CAS because we're serialized by wait_lock. */
+	lockdep_assert_held(&rwb->rtmutex.wait_lock);
+
+	if (!atomic_read(&rwb->readers)) {
+		atomic_set(&rwb->readers, WRITER_BIAS);
+		return 1;
+	}
+
+	return 0;
+}
+
 static int __sched rwbase_write_lock(struct rwbase_rt *rwb,
 				     unsigned int state)
 {
@@ -210,34 +223,30 @@ static int __sched rwbase_write_lock(str
 	atomic_sub(READER_BIAS, &rwb->readers);
 
 	raw_spin_lock_irqsave(&rtm->wait_lock, flags);
-	/*
-	 * set_current_state() for rw_semaphore
-	 * current_save_and_set_rtlock_wait_state() for rwlock
-	 */
-	rwbase_set_and_save_current_state(state);
+	if (__rwbase_write_trylock(rwb))
+		goto out_unlock;
 
-	/* Block until all readers have left the critical section. */
-	for (; atomic_read(&rwb->readers);) {
+	rwbase_set_and_save_current_state(state);
+	for (;;) {
 		/* Optimized out for rwlocks */
 		if (rwbase_signal_pending_state(state, current)) {
 			rwbase_restore_current_state();
 			__rwbase_write_unlock(rwb, 0, flags);
 			return -EINTR;
 		}
+
+		if (__rwbase_write_trylock(rwb))
+			break;
+
 		raw_spin_unlock_irqrestore(&rtm->wait_lock, flags);
+		rwbase_schedule();
+		raw_spin_lock_irqsave(&rtm->wait_lock, flags);
 
-		/*
-		 * Schedule and wait for the readers to leave the critical
-		 * section. The last reader leaving it wakes the waiter.
-		 */
-		if (atomic_read(&rwb->readers) != 0)
-			rwbase_schedule();
 		set_current_state(state);
-		raw_spin_lock_irqsave(&rtm->wait_lock, flags);
 	}
-
-	atomic_set(&rwb->readers, WRITER_BIAS);
 	rwbase_restore_current_state();
+
+out_unlock:
 	raw_spin_unlock_irqrestore(&rtm->wait_lock, flags);
 	return 0;
 }
@@ -253,8 +262,7 @@ static inline int rwbase_write_trylock(s
 	atomic_sub(READER_BIAS, &rwb->readers);
 
 	raw_spin_lock_irqsave(&rtm->wait_lock, flags);
-	if (!atomic_read(&rwb->readers)) {
-		atomic_set(&rwb->readers, WRITER_BIAS);
+	if (__rwbase_write_trylock(rwb)) {
 		raw_spin_unlock_irqrestore(&rtm->wait_lock, flags);
 		return 1;
 	}



  parent reply	other threads:[~2021-09-09 11:04 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-09 10:59 [PATCH 0/4] locking/rwbase: Assorted fixes Peter Zijlstra
2021-09-09 10:59 ` [PATCH 1/4] sched/wakeup: Strengthen current_save_and_set_rtlock_wait_state() Peter Zijlstra
2021-09-09 13:45   ` Will Deacon
2021-09-09 14:27     ` Peter Zijlstra
2021-09-10 12:57       ` Will Deacon
2021-09-10 13:17         ` Peter Zijlstra
2021-09-10 14:01           ` Peter Zijlstra
2021-09-10 15:06             ` Will Deacon
2021-09-10 16:07             ` Waiman Long
2021-09-10 17:09               ` Peter Zijlstra
2021-09-12  3:57       ` Boqun Feng
2021-09-10 12:45   ` Sebastian Andrzej Siewior
2021-09-13 22:08   ` Thomas Gleixner
2021-09-13 22:52     ` Thomas Gleixner
2021-09-14  6:45       ` Peter Zijlstra
2021-09-09 10:59 ` [PATCH 2/4] locking/rwbase: Properly match set_and_save_state() to restore_state() Peter Zijlstra
2021-09-09 13:53   ` Will Deacon
2021-09-14  7:31   ` Thomas Gleixner
2021-09-16 11:59   ` [tip: locking/urgent] " tip-bot2 for Peter Zijlstra
2021-09-09 10:59 ` Peter Zijlstra [this message]
2021-09-14  7:45   ` [PATCH 3/4] locking/rwbase: Fix rwbase_write_lock() vs __rwbase_read_lock() Thomas Gleixner
2021-09-14 13:59     ` Peter Zijlstra
2021-09-14 15:00       ` Thomas Gleixner
2021-09-16 11:59       ` [tip: locking/urgent] locking/rwbase: Extract __rwbase_write_trylock() tip-bot2 for Peter Zijlstra
2021-09-09 10:59 ` [PATCH 4/4] locking/rwbase: Take care of ordering guarantee for fastpath reader Peter Zijlstra
2021-09-14  7:46   ` Thomas Gleixner
2021-09-16 11:59   ` [tip: locking/urgent] " tip-bot2 for Boqun Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210909110203.893845303@infradead.org \
    --to=peterz@infradead.org \
    --cc=bigeasy@linutronix.de \
    --cc=boqun.feng@gmail.com \
    --cc=bristot@redhat.com \
    --cc=dave@stgolabs.net \
    --cc=efault@gmx.de \
    --cc=juri.lelli@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=longman@redhat.com \
    --cc=mingo@kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.