From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: Marek Vasut <marex@denx.de>
Subject: [PATCH 4/6] arm: Remove bg0900 board
Date: Thu, 9 Sep 2021 07:54:51 -0400 [thread overview]
Message-ID: <20210909115453.5073-4-trini@konsulko.com> (raw)
In-Reply-To: <20210909115453.5073-1-trini@konsulko.com>
This board has not been converted to CONFIG_DM by the deadline.
Remove it.
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/arm/mach-imx/mxs/Kconfig | 4 -
board/ppcag/bg0900/Kconfig | 15 ----
board/ppcag/bg0900/MAINTAINERS | 6 --
board/ppcag/bg0900/Makefile | 10 ---
board/ppcag/bg0900/bg0900.c | 89 -------------------
board/ppcag/bg0900/spl_boot.c | 152 ---------------------------------
configs/bg0900_defconfig | 43 ----------
include/configs/bg0900.h | 39 ---------
8 files changed, 358 deletions(-)
delete mode 100644 board/ppcag/bg0900/Kconfig
delete mode 100644 board/ppcag/bg0900/MAINTAINERS
delete mode 100644 board/ppcag/bg0900/Makefile
delete mode 100644 board/ppcag/bg0900/bg0900.c
delete mode 100644 board/ppcag/bg0900/spl_boot.c
delete mode 100644 configs/bg0900_defconfig
delete mode 100644 include/configs/bg0900.h
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index 9f48ffda414a..b2026a3758a5 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -39,9 +39,6 @@ choice
prompt "MX28 board select"
optional
-config TARGET_BG0900
- bool "Support bg0900"
-
config TARGET_MX28EVK
bool "Support mx28evk"
select BOARD_EARLY_INIT_F
@@ -56,6 +53,5 @@ config SYS_SOC
source "board/freescale/mx28evk/Kconfig"
source "board/liebherr/xea/Kconfig"
-source "board/ppcag/bg0900/Kconfig"
endif
diff --git a/board/ppcag/bg0900/Kconfig b/board/ppcag/bg0900/Kconfig
deleted file mode 100644
index d7f2368a230d..000000000000
--- a/board/ppcag/bg0900/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_BG0900
-
-config SYS_BOARD
- default "bg0900"
-
-config SYS_VENDOR
- default "ppcag"
-
-config SYS_SOC
- default "mxs"
-
-config SYS_CONFIG_NAME
- default "bg0900"
-
-endif
diff --git a/board/ppcag/bg0900/MAINTAINERS b/board/ppcag/bg0900/MAINTAINERS
deleted file mode 100644
index 853c0d59c8d1..000000000000
--- a/board/ppcag/bg0900/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BG0900 BOARD
-M: Marek Vasut <marex@denx.de>
-S: Maintained
-F: board/ppcag/bg0900/
-F: include/configs/bg0900.h
-F: configs/bg0900_defconfig
diff --git a/board/ppcag/bg0900/Makefile b/board/ppcag/bg0900/Makefile
deleted file mode 100644
index 540bd9dc12f7..000000000000
--- a/board/ppcag/bg0900/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-ifndef CONFIG_SPL_BUILD
-obj-y := bg0900.o
-else
-obj-y := spl_boot.o
-endif
diff --git a/board/ppcag/bg0900/bg0900.c b/board/ppcag/bg0900/bg0900.c
deleted file mode 100644
index 578f5c73b6cb..000000000000
--- a/board/ppcag/bg0900/bg0900.c
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PPC-AG BG0900 board
- *
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/delay.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
- /* IO1 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK1, 480000);
-
- /* SSP2 clock at 160MHz */
- mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
-
- return 0;
-}
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(struct bd_info *bis)
-{
- struct mxs_clkctrl_regs *clkctrl_regs =
- (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
- struct eth_device *dev;
- int ret;
-
- ret = cpu_eth_init(bis);
-
- /* BG0900 uses ENET_CLK PAD to drive FEC clock */
- writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
- &clkctrl_regs->hw_clkctrl_enet);
-
- /* Reset FEC PHYs */
- gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0);
- udelay(200);
- gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1);
-
- ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
- if (ret) {
- puts("FEC MXS: Unable to init FEC0\n");
- return ret;
- }
-
- dev = eth_get_dev_by_name("FEC0");
- if (!dev) {
- puts("FEC MXS: Unable to get FEC0 device entry\n");
- return -EINVAL;
- }
-
- return ret;
-}
-
-#endif
diff --git a/board/ppcag/bg0900/spl_boot.c b/board/ppcag/bg0900/spl_boot.c
deleted file mode 100644
index b46bc8939a38..000000000000
--- a/board/ppcag/bg0900/spl_boot.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PPC-AG BG0900 Boot setup
- *
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-
-const iomux_cfg_t iomux_setup[] = {
- /* DUART */
- MX28_PAD_PWM0__DUART_RX,
- MX28_PAD_PWM1__DUART_TX,
-
- /* GPMI NAND */
- MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDN__GPMI_RDN |
- (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
-
- /* FEC0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
-
- /* FEC0 Reset */
- MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
- /* EMI */
- MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
-
- MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-
- /* SPI2 (for SPI flash) */
- MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_SS0__SSP2_D3 |
- (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-};
-
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
- /*
- * DDR Controller Registers
- * Manufacturer: Winbond
- * Device Part Number: W972GG6JB-25I
- * Clock Freq.: 200MHz
- * Density: 2Gb
- * Chip Selects: 1
- * Number of Banks: 8
- * Row address: 14
- * Column address: 10
- */
-
- dram_vals[0x74 / 4] = 0x0102010A;
- dram_vals[0x98 / 4] = 0x04005003;
- dram_vals[0x9c / 4] = 0x090000c8;
-
- dram_vals[0xa8 / 4] = 0x0036b009;
- dram_vals[0xac / 4] = 0x03270612;
-
- dram_vals[0xb0 / 4] = 0x02020202;
- dram_vals[0xb4 / 4] = 0x00c80029;
-
- dram_vals[0xc0 / 4] = 0x00011900;
-
- dram_vals[0x12c / 4] = 0x07400300;
- dram_vals[0x130 / 4] = 0x07400300;
- dram_vals[0x2c4 / 4] = 0x02030303;
-}
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig
deleted file mode 100644
index a3282eba41a8..000000000000
--- a/configs/bg0900_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_IMX_CONFIG=""
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_BG0900=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_MXS_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h
deleted file mode 100644
index d9599b859112..000000000000
--- a/include/configs/bg0900.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-#ifndef __CONFIGS_BG0900_H__
-#define __CONFIGS_BG0900_H__
-
-/* Memory configuration */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Environment */
-
-/* FEC Ethernet on SoC */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#endif
-
-/* Boot Linux */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_BOOTCOMMAND "bootm"
-
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "update_spi_firmware_filename=u-boot.sb\0" \
- "update_spi_firmware_maxsz=0x80000\0" \
- "update_spi_firmware=" /* Update the SPI flash firmware */ \
- "if sf probe 2:0 ; then " \
- "if tftp ${update_spi_firmware_filename} ; then " \
- "sf erase 0x0 +${filesize} ; " \
- "sf write ${loadaddr} 0x0 ${filesize} ; " \
- "fi ; " \
- "fi\0"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_BG0900_H__ */
--
2.17.1
next prev parent reply other threads:[~2021-09-09 11:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-09 11:54 [PATCH 1/6] arm: Remove flea3 board Tom Rini
2021-09-09 11:54 ` [PATCH 2/6] arm: Remove aspenite board Tom Rini
2021-09-09 12:04 ` Stefan Roese
2021-09-09 11:54 ` [PATCH 3/6] arm: Remove zmx25 board and ARCH_MX25 Tom Rini
2021-10-02 21:08 ` Tom Rini
2021-09-09 11:54 ` Tom Rini [this message]
2021-10-02 21:08 ` [PATCH 4/6] arm: Remove bg0900 board Tom Rini
2021-09-09 11:54 ` [PATCH 5/6] arm: Remove edminiv2 board and orion5x support Tom Rini
2021-09-09 12:05 ` Stefan Roese
2021-09-09 22:54 ` Simon Guinot
2021-09-09 23:20 ` Tom Rini
2021-09-10 4:41 ` Stefan Roese
2021-09-14 8:37 ` Simon Guinot
2021-09-14 11:43 ` Tom Rini
2021-09-15 13:08 ` Simon Guinot
2021-09-09 11:54 ` [PATCH 6/6] ppc: Remove MPC8349EMDS board and ARCH_MPC8349 support Tom Rini
2021-10-02 21:09 ` Tom Rini
2021-09-09 14:44 ` [PATCH 1/6] arm: Remove flea3 board Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210909115453.5073-4-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.