All of lore.kernel.org
 help / color / mirror / Atom feed
* [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
@ 2021-09-10 19:27 ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

This series adds improved perf support for RISC-V based system using
SBI PMU extension[1] and Sscofpmf extension[2]. The SBI PMU extension allows
the kernel to program the counters for different events and start/stop counters
while the sscofpmf extension allows the counter overflow interrupt and privilege
mode filtering. An hardware platform can leverage SBI PMU extension without
the sscofpmf extension if it supports mcountinhibit and mcounteren. However,
the reverse is not true. With both of these extension enabled, a platform can
take advantage of all both event counting and sampling using perf tool. 

This series introduces a platform perf driver instead of a existing arch
specific implementation. The new perf implementation has adopted a modular
approach where most of the generic event handling is done in the core library
while individual PMUs need to only implement necessary features specific to
the PMU. This is easily extensible and any future RISC-V PMU implementation
can leverage this. Currently, SBI PMU driver & legacy PMU driver are implemented
as a part of this series.

The legacy driver tries to reimplement the existing minimal perf under a new
config to maintain backward compatibility. This implementation only allows
monitoring of always running cycle/instruction counters. Moreover, they can
not be started or stopped. In general, this is very limited and not very useful.
That's why, I am not very keen to carry the support into the new driver.
However, I don't want to break perf for any existing hardware platforms.
If nobody really uses perf currently, I will be happy to drop PATCH 4.

This series has been tested in Qemu on both RV64 & RV32. Qemu[5] & OpenSBI [3]
patches are required to test it. Qemu changes are not backward compatible.
That means, you can not use perf anymore on older Qemu versions with latest
OpenSBI and/or Kernel. However, newer kernel will just use legacy pmu driver if
old OpenSBI is detected or hardware doesn't implement mcountinhibit.

Here is an output of perf stat/report while running hackbench with OpenSBI & Linux
kernel patches applied [3].

Perf stat:
=========

[root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e r8000000000000007
-e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e branch-misses
-e cache-misses -e dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses
-e cycles -e instructions ./hackbench -pipe 15 process
Running with 15*40 (== 600) tasks.
Time: 6.578

 Performance counter stats for './hackbench -pipe 15 process':

             6,491      r8000000000000005      (52.59%) --> SBI_PMU_FW_SET_TIMER
            20,433      r8000000000000007      (60.74%) --> SBI_PMU_FW_IPI_RECVD
            21,271      r8000000000000006      (68.71%) --> SBI_PMU_FW_IPI_SENT
                 0      r0000000000020002      (76.55%)
     <not counted>      r0000000000020004      (0.00%)
     <not counted>      branch-misses          (0.00%)
     <not counted>      cache-misses           (0.00%)
        57,537,853      dTLB-load-misses       (9.49%)
         2,821,147      dTLB-store-misses      (18.64%)
        52,928,130      iTLB-load-misses       (27.53%)
    89,521,791,110      cycles                 (36.08%)
    90,678,132,464      instructions #    1.01  insn per cycle (44.44%)

       6.975908032 seconds time elapsed

       3.130950000 seconds user
      24.353310000 seconds sys

The patches can also be found in the github[4].

Perf record:
============
[root@fedora-riscv riscv]# perf record -e cycles -e instructions -e \
dTLB-load-misses -e dTLB-store-misses -c 1000 ./hackbench -pipe 15 process 15
Running with 15*40 (== 600) tasks.
Time: 1.238
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.106 MB perf.data (1020 samples) ]

[root@fedora-riscv riscv]# perf report  
Available samples                                                               
372 cycles                                                                     ◆
372 instructions                                                               ▒
262 dTLB-load-misses                                                           ▒
14 dTLB-store-misses      

The patches can also be found in the github[4].

[1] https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
[2] https://drive.google.com/file/d/171j4jFjIkKdj5LWcExphq4xG_2sihbfd/edit
[3] https://github.com/atishp04/opensbi/tree/pmu_sscofpmf 
[4] https://github.com/atishp04/linux/tree/riscv_pmu_v3
[5] https://github.com/atishp04/qemu/tree/riscv_pmu_v2

Changes from v3->v4:
1. Added interrupt overflow support.
2. Cleaned up legacy driver initialization.
3. Supports perf record now.
4. Added the DT binding and maintainers file.
5. Changed cpu hotplug notifier to be multi-state.
6. OpenSBI doesn't disable cycle/instret counter during boot. Update the
   perf code to disable all the counter during the boot.

Changes from v1->v2
1. Implemented the latest SBI PMU extension specification.
2. The core platform driver was changed to operate as a library while only
   sbi based PMU is built as a driver. The legacy one is just a fallback if
   SBI PMU extension is not available.

Atish Patra (10):
RISC-V: Remove the current perf implementation
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add RISC-V SBI PMU extension definitions
dt-binding: pmu: Add RISC-V PMU DT bindings
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add interrupt support for perf
Documentation: riscv: Remove the old documentation
MAINTAINERS: Add entry for RISC-V PMU drivers

.../devicetree/bindings/perf/riscv,pmu.yaml   |  51 ++
Documentation/riscv/pmu.rst                   | 255 ------
MAINTAINERS                                   |  10 +
arch/riscv/Kconfig                            |  13 -
arch/riscv/include/asm/csr.h                  |  66 +-
arch/riscv/include/asm/perf_event.h           |  72 --
arch/riscv/include/asm/sbi.h                  |  97 +++
arch/riscv/kernel/Makefile                    |   1 -
arch/riscv/kernel/perf_event.c                | 485 ------------
drivers/perf/Kconfig                          |  25 +
drivers/perf/Makefile                         |   5 +
drivers/perf/riscv_pmu.c                      | 331 ++++++++
drivers/perf/riscv_pmu_legacy.c               | 143 ++++
drivers/perf/riscv_pmu_sbi.c                  | 731 ++++++++++++++++++
include/linux/cpuhotplug.h                    |   1 +
include/linux/perf/riscv_pmu.h                |  69 ++
16 files changed, 1528 insertions(+), 827 deletions(-)
create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
delete mode 100644 Documentation/riscv/pmu.rst
delete mode 100644 arch/riscv/kernel/perf_event.c
create mode 100644 drivers/perf/riscv_pmu.c
create mode 100644 drivers/perf/riscv_pmu_legacy.c
create mode 100644 drivers/perf/riscv_pmu_sbi.c
create mode 100644 include/linux/perf/riscv_pmu.h

--
2.31.1


^ permalink raw reply	[flat|nested] 36+ messages in thread
* [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
@ 2021-09-10 19:27 ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

This series adds improved perf support for RISC-V based system using
SBI PMU extension[1] and Sscofpmf extension[2]. The SBI PMU extension allows
the kernel to program the counters for different events and start/stop counters
while the sscofpmf extension allows the counter overflow interrupt and privilege
mode filtering. An hardware platform can leverage SBI PMU extension without
the sscofpmf extension if it supports mcountinhibit and mcounteren. However,
the reverse is not true. With both of these extension enabled, a platform can
take advantage of all both event counting and sampling using perf tool. 

This series introduces a platform perf driver instead of a existing arch
specific implementation. The new perf implementation has adopted a modular
approach where most of the generic event handling is done in the core library
while individual PMUs need to only implement necessary features specific to
the PMU. This is easily extensible and any future RISC-V PMU implementation
can leverage this. Currently, SBI PMU driver & legacy PMU driver are implemented
as a part of this series.

The legacy driver tries to reimplement the existing minimal perf under a new
config to maintain backward compatibility. This implementation only allows
monitoring of always running cycle/instruction counters. Moreover, they can
not be started or stopped. In general, this is very limited and not very useful.
That's why, I am not very keen to carry the support into the new driver.
However, I don't want to break perf for any existing hardware platforms.
If nobody really uses perf currently, I will be happy to drop PATCH 4.

This series has been tested in Qemu on both RV64 & RV32. Qemu[5] & OpenSBI [3]
patches are required to test it. Qemu changes are not backward compatible.
That means, you can not use perf anymore on older Qemu versions with latest
OpenSBI and/or Kernel. However, newer kernel will just use legacy pmu driver if
old OpenSBI is detected or hardware doesn't implement mcountinhibit.

Here is an output of perf stat/report while running hackbench with OpenSBI & Linux
kernel patches applied [3].

Perf stat:
=========

[root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e r8000000000000007
-e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e branch-misses
-e cache-misses -e dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses
-e cycles -e instructions ./hackbench -pipe 15 process
Running with 15*40 (== 600) tasks.
Time: 6.578

 Performance counter stats for './hackbench -pipe 15 process':

             6,491      r8000000000000005      (52.59%) --> SBI_PMU_FW_SET_TIMER
            20,433      r8000000000000007      (60.74%) --> SBI_PMU_FW_IPI_RECVD
            21,271      r8000000000000006      (68.71%) --> SBI_PMU_FW_IPI_SENT
                 0      r0000000000020002      (76.55%)
     <not counted>      r0000000000020004      (0.00%)
     <not counted>      branch-misses          (0.00%)
     <not counted>      cache-misses           (0.00%)
        57,537,853      dTLB-load-misses       (9.49%)
         2,821,147      dTLB-store-misses      (18.64%)
        52,928,130      iTLB-load-misses       (27.53%)
    89,521,791,110      cycles                 (36.08%)
    90,678,132,464      instructions #    1.01  insn per cycle (44.44%)

       6.975908032 seconds time elapsed

       3.130950000 seconds user
      24.353310000 seconds sys

The patches can also be found in the github[4].

Perf record:
============
[root@fedora-riscv riscv]# perf record -e cycles -e instructions -e \
dTLB-load-misses -e dTLB-store-misses -c 1000 ./hackbench -pipe 15 process 15
Running with 15*40 (== 600) tasks.
Time: 1.238
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.106 MB perf.data (1020 samples) ]

[root@fedora-riscv riscv]# perf report  
Available samples                                                               
372 cycles                                                                     ◆
372 instructions                                                               ▒
262 dTLB-load-misses                                                           ▒
14 dTLB-store-misses      

The patches can also be found in the github[4].

[1] https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
[2] https://drive.google.com/file/d/171j4jFjIkKdj5LWcExphq4xG_2sihbfd/edit
[3] https://github.com/atishp04/opensbi/tree/pmu_sscofpmf 
[4] https://github.com/atishp04/linux/tree/riscv_pmu_v3
[5] https://github.com/atishp04/qemu/tree/riscv_pmu_v2

Changes from v3->v4:
1. Added interrupt overflow support.
2. Cleaned up legacy driver initialization.
3. Supports perf record now.
4. Added the DT binding and maintainers file.
5. Changed cpu hotplug notifier to be multi-state.
6. OpenSBI doesn't disable cycle/instret counter during boot. Update the
   perf code to disable all the counter during the boot.

Changes from v1->v2
1. Implemented the latest SBI PMU extension specification.
2. The core platform driver was changed to operate as a library while only
   sbi based PMU is built as a driver. The legacy one is just a fallback if
   SBI PMU extension is not available.

Atish Patra (10):
RISC-V: Remove the current perf implementation
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add RISC-V SBI PMU extension definitions
dt-binding: pmu: Add RISC-V PMU DT bindings
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add interrupt support for perf
Documentation: riscv: Remove the old documentation
MAINTAINERS: Add entry for RISC-V PMU drivers

.../devicetree/bindings/perf/riscv,pmu.yaml   |  51 ++
Documentation/riscv/pmu.rst                   | 255 ------
MAINTAINERS                                   |  10 +
arch/riscv/Kconfig                            |  13 -
arch/riscv/include/asm/csr.h                  |  66 +-
arch/riscv/include/asm/perf_event.h           |  72 --
arch/riscv/include/asm/sbi.h                  |  97 +++
arch/riscv/kernel/Makefile                    |   1 -
arch/riscv/kernel/perf_event.c                | 485 ------------
drivers/perf/Kconfig                          |  25 +
drivers/perf/Makefile                         |   5 +
drivers/perf/riscv_pmu.c                      | 331 ++++++++
drivers/perf/riscv_pmu_legacy.c               | 143 ++++
drivers/perf/riscv_pmu_sbi.c                  | 731 ++++++++++++++++++
include/linux/cpuhotplug.h                    |   1 +
include/linux/perf/riscv_pmu.h                |  69 ++
16 files changed, 1528 insertions(+), 827 deletions(-)
create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
delete mode 100644 Documentation/riscv/pmu.rst
delete mode 100644 arch/riscv/kernel/perf_event.c
create mode 100644 drivers/perf/riscv_pmu.c
create mode 100644 drivers/perf/riscv_pmu_legacy.c
create mode 100644 drivers/perf/riscv_pmu_sbi.c
create mode 100644 include/linux/perf/riscv_pmu.h

--
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
* [v3 01/10] RISC-V: Remove the current perf implementation
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The current perf implementation in RISC-V is not very useful as it can not
count any events other than cycle/instructions. Moreover, perf record
can not be used or the events can not be started or stopped.

Remove the implementation now for a better platform driver in future
that will implement most of the missing functionality.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/Kconfig                  |  13 -
 arch/riscv/include/asm/perf_event.h |  72 -----
 arch/riscv/kernel/Makefile          |   1 -
 arch/riscv/kernel/perf_event.c      | 485 ----------------------------
 4 files changed, 571 deletions(-)
 delete mode 100644 arch/riscv/kernel/perf_event.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c79955655fa4..c4afe2c8ff03 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -360,19 +360,6 @@ config RISCV_ISA_C
 
 	   If you don't know what to do here, say Y.
 
-menu "supported PMU type"
-	depends on PERF_EVENTS
-
-config RISCV_BASE_PMU
-	bool "Base Performance Monitoring Unit"
-	def_bool y
-	help
-	  A base PMU that serves as a reference implementation and has limited
-	  feature of perf.  It can run on any RISC-V machines so serves as the
-	  fallback, but this option can also be disable to reduce kernel size.
-
-endmenu
-
 config FPU
 	bool "FPU support"
 	default y
diff --git a/arch/riscv/include/asm/perf_event.h b/arch/riscv/include/asm/perf_event.h
index 062efd3a1d5d..d42c901f9a97 100644
--- a/arch/riscv/include/asm/perf_event.h
+++ b/arch/riscv/include/asm/perf_event.h
@@ -9,77 +9,5 @@
 #define _ASM_RISCV_PERF_EVENT_H
 
 #include <linux/perf_event.h>
-#include <linux/ptrace.h>
-#include <linux/interrupt.h>
-
-#ifdef CONFIG_RISCV_BASE_PMU
-#define RISCV_BASE_COUNTERS	2
-
-/*
- * The RISCV_MAX_COUNTERS parameter should be specified.
- */
-
-#define RISCV_MAX_COUNTERS	2
-
-/*
- * These are the indexes of bits in counteren register *minus* 1,
- * except for cycle.  It would be coherent if it can directly mapped
- * to counteren bit definition, but there is a *time* register at
- * counteren[1].  Per-cpu structure is scarce resource here.
- *
- * According to the spec, an implementation can support counter up to
- * mhpmcounter31, but many high-end processors has at most 6 general
- * PMCs, we give the definition to MHPMCOUNTER8 here.
- */
-#define RISCV_PMU_CYCLE		0
-#define RISCV_PMU_INSTRET	1
-#define RISCV_PMU_MHPMCOUNTER3	2
-#define RISCV_PMU_MHPMCOUNTER4	3
-#define RISCV_PMU_MHPMCOUNTER5	4
-#define RISCV_PMU_MHPMCOUNTER6	5
-#define RISCV_PMU_MHPMCOUNTER7	6
-#define RISCV_PMU_MHPMCOUNTER8	7
-
-#define RISCV_OP_UNSUPP		(-EOPNOTSUPP)
-
-struct cpu_hw_events {
-	/* # currently enabled events*/
-	int			n_events;
-	/* currently enabled events */
-	struct perf_event	*events[RISCV_MAX_COUNTERS];
-	/* vendor-defined PMU data */
-	void			*platform;
-};
-
-struct riscv_pmu {
-	struct pmu	*pmu;
-
-	/* generic hw/cache events table */
-	const int	*hw_events;
-	const int	(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
-				       [PERF_COUNT_HW_CACHE_OP_MAX]
-				       [PERF_COUNT_HW_CACHE_RESULT_MAX];
-	/* method used to map hw/cache events */
-	int		(*map_hw_event)(u64 config);
-	int		(*map_cache_event)(u64 config);
-
-	/* max generic hw events in map */
-	int		max_events;
-	/* number total counters, 2(base) + x(general) */
-	int		num_counters;
-	/* the width of the counter */
-	int		counter_width;
-
-	/* vendor-defined PMU features */
-	void		*platform;
-
-	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
-	int		irq;
-};
-
-#endif
-#ifdef CONFIG_PERF_EVENTS
 #define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
-#endif
-
 #endif /* _ASM_RISCV_PERF_EVENT_H */
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 3397ddac1a30..e66870a4422f 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_MODULE_SECTIONS)	+= module-sections.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= mcount-dyn.o
 
-obj-$(CONFIG_RISCV_BASE_PMU)	+= perf_event.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
diff --git a/arch/riscv/kernel/perf_event.c b/arch/riscv/kernel/perf_event.c
deleted file mode 100644
index c835f0362d94..000000000000
--- a/arch/riscv/kernel/perf_event.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2009 Jaswinder Singh Rajput
- * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
- * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
- * Copyright (C) 2009 Google, Inc., Stephane Eranian
- * Copyright 2014 Tilera Corporation. All Rights Reserved.
- * Copyright (C) 2018 Andes Technology Corporation
- *
- * Perf_events support for RISC-V platforms.
- *
- * Since the spec. (as of now, Priv-Spec 1.10) does not provide enough
- * functionality for perf event to fully work, this file provides
- * the very basic framework only.
- *
- * For platform portings, please check Documentations/riscv/pmu.txt.
- *
- * The Copyright line includes x86 and tile ones.
- */
-
-#include <linux/kprobes.h>
-#include <linux/kernel.h>
-#include <linux/kdebug.h>
-#include <linux/mutex.h>
-#include <linux/bitmap.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <linux/atomic.h>
-#include <linux/of.h>
-#include <asm/perf_event.h>
-
-static const struct riscv_pmu *riscv_pmu __read_mostly;
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-/*
- * Hardware & cache maps and their methods
- */
-
-static const int riscv_hw_event_map[] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= RISCV_PMU_CYCLE,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= RISCV_PMU_INSTRET,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_CACHE_MISSES]		= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_BUS_CYCLES]		= RISCV_OP_UNSUPP,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-static const int riscv_cache_event_map[PERF_COUNT_HW_CACHE_MAX]
-[PERF_COUNT_HW_CACHE_OP_MAX]
-[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] =  RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] =  RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-};
-
-static int riscv_map_hw_event(u64 config)
-{
-	if (config >= riscv_pmu->max_events)
-		return -EINVAL;
-
-	return riscv_pmu->hw_events[config];
-}
-
-static int riscv_map_cache_decode(u64 config, unsigned int *type,
-			   unsigned int *op, unsigned int *result)
-{
-	return -ENOENT;
-}
-
-static int riscv_map_cache_event(u64 config)
-{
-	unsigned int type, op, result;
-	int err = -ENOENT;
-		int code;
-
-	err = riscv_map_cache_decode(config, &type, &op, &result);
-	if (!riscv_pmu->cache_events || err)
-		return err;
-
-	if (type >= PERF_COUNT_HW_CACHE_MAX ||
-	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
-	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	code = (*riscv_pmu->cache_events)[type][op][result];
-	if (code == RISCV_OP_UNSUPP)
-		return -EINVAL;
-
-	return code;
-}
-
-/*
- * Low-level functions: reading/writing counters
- */
-
-static inline u64 read_counter(int idx)
-{
-	u64 val = 0;
-
-	switch (idx) {
-	case RISCV_PMU_CYCLE:
-		val = csr_read(CSR_CYCLE);
-		break;
-	case RISCV_PMU_INSTRET:
-		val = csr_read(CSR_INSTRET);
-		break;
-	default:
-		WARN_ON_ONCE(idx < 0 ||	idx > RISCV_MAX_COUNTERS);
-		return -EINVAL;
-	}
-
-	return val;
-}
-
-static inline void write_counter(int idx, u64 value)
-{
-	/* currently not supported */
-	WARN_ON_ONCE(1);
-}
-
-/*
- * pmu->read: read and update the counter
- *
- * Other architectures' implementation often have a xxx_perf_event_update
- * routine, which can return counter values when called in the IRQ, but
- * return void when being called by the pmu->read method.
- */
-static void riscv_pmu_read(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	u64 prev_raw_count, new_raw_count;
-	u64 oldval;
-	int idx = hwc->idx;
-	u64 delta;
-
-	do {
-		prev_raw_count = local64_read(&hwc->prev_count);
-		new_raw_count = read_counter(idx);
-
-		oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-					 new_raw_count);
-	} while (oldval != prev_raw_count);
-
-	/*
-	 * delta is the value to update the counter we maintain in the kernel.
-	 */
-	delta = (new_raw_count - prev_raw_count) &
-		((1ULL << riscv_pmu->counter_width) - 1);
-	local64_add(delta, &event->count);
-	/*
-	 * Something like local64_sub(delta, &hwc->period_left) here is
-	 * needed if there is an interrupt for perf.
-	 */
-}
-
-/*
- * State transition functions:
- *
- * stop()/start() & add()/del()
- */
-
-/*
- * pmu->stop: stop the counter
- */
-static void riscv_pmu_stop(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
-	hwc->state |= PERF_HES_STOPPED;
-
-	if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
-		riscv_pmu->pmu->read(event);
-		hwc->state |= PERF_HES_UPTODATE;
-	}
-}
-
-/*
- * pmu->start: start the event.
- */
-static void riscv_pmu_start(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
-		return;
-
-	if (flags & PERF_EF_RELOAD) {
-		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
-
-		/*
-		 * Set the counter to the period to the next interrupt here,
-		 * if you have any.
-		 */
-	}
-
-	hwc->state = 0;
-	perf_event_update_userpage(event);
-
-	/*
-	 * Since we cannot write to counters, this serves as an initialization
-	 * to the delta-mechanism in pmu->read(); otherwise, the delta would be
-	 * wrong when pmu->read is called for the first time.
-	 */
-	local64_set(&hwc->prev_count, read_counter(hwc->idx));
-}
-
-/*
- * pmu->add: add the event to PMU.
- */
-static int riscv_pmu_add(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (cpuc->n_events == riscv_pmu->num_counters)
-		return -ENOSPC;
-
-	/*
-	 * We don't have general conunters, so no binding-event-to-counter
-	 * process here.
-	 *
-	 * Indexing using hwc->config generally not works, since config may
-	 * contain extra information, but here the only info we have in
-	 * hwc->config is the event index.
-	 */
-	hwc->idx = hwc->config;
-	cpuc->events[hwc->idx] = event;
-	cpuc->n_events++;
-
-	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
-
-	if (flags & PERF_EF_START)
-		riscv_pmu->pmu->start(event, PERF_EF_RELOAD);
-
-	return 0;
-}
-
-/*
- * pmu->del: delete the event from PMU.
- */
-static void riscv_pmu_del(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-
-	cpuc->events[hwc->idx] = NULL;
-	cpuc->n_events--;
-	riscv_pmu->pmu->stop(event, PERF_EF_UPDATE);
-	perf_event_update_userpage(event);
-}
-
-/*
- * Interrupt: a skeletion for reference.
- */
-
-static DEFINE_MUTEX(pmc_reserve_mutex);
-
-static irqreturn_t riscv_base_pmu_handle_irq(int irq_num, void *dev)
-{
-	return IRQ_NONE;
-}
-
-static int reserve_pmc_hardware(void)
-{
-	int err = 0;
-
-	mutex_lock(&pmc_reserve_mutex);
-	if (riscv_pmu->irq >= 0 && riscv_pmu->handle_irq) {
-		err = request_irq(riscv_pmu->irq, riscv_pmu->handle_irq,
-				  IRQF_PERCPU, "riscv-base-perf", NULL);
-	}
-	mutex_unlock(&pmc_reserve_mutex);
-
-	return err;
-}
-
-static void release_pmc_hardware(void)
-{
-	mutex_lock(&pmc_reserve_mutex);
-	if (riscv_pmu->irq >= 0)
-		free_irq(riscv_pmu->irq, NULL);
-	mutex_unlock(&pmc_reserve_mutex);
-}
-
-/*
- * Event Initialization/Finalization
- */
-
-static atomic_t riscv_active_events = ATOMIC_INIT(0);
-
-static void riscv_event_destroy(struct perf_event *event)
-{
-	if (atomic_dec_return(&riscv_active_events) == 0)
-		release_pmc_hardware();
-}
-
-static int riscv_event_init(struct perf_event *event)
-{
-	struct perf_event_attr *attr = &event->attr;
-	struct hw_perf_event *hwc = &event->hw;
-	int err;
-	int code;
-
-	if (atomic_inc_return(&riscv_active_events) == 1) {
-		err = reserve_pmc_hardware();
-
-		if (err) {
-			pr_warn("PMC hardware not available\n");
-			atomic_dec(&riscv_active_events);
-			return -EBUSY;
-		}
-	}
-
-	switch (event->attr.type) {
-	case PERF_TYPE_HARDWARE:
-		code = riscv_pmu->map_hw_event(attr->config);
-		break;
-	case PERF_TYPE_HW_CACHE:
-		code = riscv_pmu->map_cache_event(attr->config);
-		break;
-	case PERF_TYPE_RAW:
-		return -EOPNOTSUPP;
-	default:
-		return -ENOENT;
-	}
-
-	event->destroy = riscv_event_destroy;
-	if (code < 0) {
-		event->destroy(event);
-		return code;
-	}
-
-	/*
-	 * idx is set to -1 because the index of a general event should not be
-	 * decided until binding to some counter in pmu->add().
-	 *
-	 * But since we don't have such support, later in pmu->add(), we just
-	 * use hwc->config as the index instead.
-	 */
-	hwc->config = code;
-	hwc->idx = -1;
-
-	return 0;
-}
-
-/*
- * Initialization
- */
-
-static struct pmu min_pmu = {
-	.name		= "riscv-base",
-	.event_init	= riscv_event_init,
-	.add		= riscv_pmu_add,
-	.del		= riscv_pmu_del,
-	.start		= riscv_pmu_start,
-	.stop		= riscv_pmu_stop,
-	.read		= riscv_pmu_read,
-};
-
-static const struct riscv_pmu riscv_base_pmu = {
-	.pmu = &min_pmu,
-	.max_events = ARRAY_SIZE(riscv_hw_event_map),
-	.map_hw_event = riscv_map_hw_event,
-	.hw_events = riscv_hw_event_map,
-	.map_cache_event = riscv_map_cache_event,
-	.cache_events = &riscv_cache_event_map,
-	.counter_width = 63,
-	.num_counters = RISCV_BASE_COUNTERS + 0,
-	.handle_irq = &riscv_base_pmu_handle_irq,
-
-	/* This means this PMU has no IRQ. */
-	.irq = -1,
-};
-
-static const struct of_device_id riscv_pmu_of_ids[] = {
-	{.compatible = "riscv,base-pmu",	.data = &riscv_base_pmu},
-	{ /* sentinel value */ }
-};
-
-static int __init init_hw_perf_events(void)
-{
-	struct device_node *node = of_find_node_by_type(NULL, "pmu");
-	const struct of_device_id *of_id;
-
-	riscv_pmu = &riscv_base_pmu;
-
-	if (node) {
-		of_id = of_match_node(riscv_pmu_of_ids, node);
-
-		if (of_id)
-			riscv_pmu = of_id->data;
-		of_node_put(node);
-	}
-
-	perf_pmu_register(riscv_pmu->pmu, "cpu", PERF_TYPE_RAW);
-	return 0;
-}
-arch_initcall(init_hw_perf_events);
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 01/10] RISC-V: Remove the current perf implementation
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The current perf implementation in RISC-V is not very useful as it can not
count any events other than cycle/instructions. Moreover, perf record
can not be used or the events can not be started or stopped.

Remove the implementation now for a better platform driver in future
that will implement most of the missing functionality.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/Kconfig                  |  13 -
 arch/riscv/include/asm/perf_event.h |  72 -----
 arch/riscv/kernel/Makefile          |   1 -
 arch/riscv/kernel/perf_event.c      | 485 ----------------------------
 4 files changed, 571 deletions(-)
 delete mode 100644 arch/riscv/kernel/perf_event.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c79955655fa4..c4afe2c8ff03 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -360,19 +360,6 @@ config RISCV_ISA_C
 
 	   If you don't know what to do here, say Y.
 
-menu "supported PMU type"
-	depends on PERF_EVENTS
-
-config RISCV_BASE_PMU
-	bool "Base Performance Monitoring Unit"
-	def_bool y
-	help
-	  A base PMU that serves as a reference implementation and has limited
-	  feature of perf.  It can run on any RISC-V machines so serves as the
-	  fallback, but this option can also be disable to reduce kernel size.
-
-endmenu
-
 config FPU
 	bool "FPU support"
 	default y
diff --git a/arch/riscv/include/asm/perf_event.h b/arch/riscv/include/asm/perf_event.h
index 062efd3a1d5d..d42c901f9a97 100644
--- a/arch/riscv/include/asm/perf_event.h
+++ b/arch/riscv/include/asm/perf_event.h
@@ -9,77 +9,5 @@
 #define _ASM_RISCV_PERF_EVENT_H
 
 #include <linux/perf_event.h>
-#include <linux/ptrace.h>
-#include <linux/interrupt.h>
-
-#ifdef CONFIG_RISCV_BASE_PMU
-#define RISCV_BASE_COUNTERS	2
-
-/*
- * The RISCV_MAX_COUNTERS parameter should be specified.
- */
-
-#define RISCV_MAX_COUNTERS	2
-
-/*
- * These are the indexes of bits in counteren register *minus* 1,
- * except for cycle.  It would be coherent if it can directly mapped
- * to counteren bit definition, but there is a *time* register at
- * counteren[1].  Per-cpu structure is scarce resource here.
- *
- * According to the spec, an implementation can support counter up to
- * mhpmcounter31, but many high-end processors has at most 6 general
- * PMCs, we give the definition to MHPMCOUNTER8 here.
- */
-#define RISCV_PMU_CYCLE		0
-#define RISCV_PMU_INSTRET	1
-#define RISCV_PMU_MHPMCOUNTER3	2
-#define RISCV_PMU_MHPMCOUNTER4	3
-#define RISCV_PMU_MHPMCOUNTER5	4
-#define RISCV_PMU_MHPMCOUNTER6	5
-#define RISCV_PMU_MHPMCOUNTER7	6
-#define RISCV_PMU_MHPMCOUNTER8	7
-
-#define RISCV_OP_UNSUPP		(-EOPNOTSUPP)
-
-struct cpu_hw_events {
-	/* # currently enabled events*/
-	int			n_events;
-	/* currently enabled events */
-	struct perf_event	*events[RISCV_MAX_COUNTERS];
-	/* vendor-defined PMU data */
-	void			*platform;
-};
-
-struct riscv_pmu {
-	struct pmu	*pmu;
-
-	/* generic hw/cache events table */
-	const int	*hw_events;
-	const int	(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
-				       [PERF_COUNT_HW_CACHE_OP_MAX]
-				       [PERF_COUNT_HW_CACHE_RESULT_MAX];
-	/* method used to map hw/cache events */
-	int		(*map_hw_event)(u64 config);
-	int		(*map_cache_event)(u64 config);
-
-	/* max generic hw events in map */
-	int		max_events;
-	/* number total counters, 2(base) + x(general) */
-	int		num_counters;
-	/* the width of the counter */
-	int		counter_width;
-
-	/* vendor-defined PMU features */
-	void		*platform;
-
-	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
-	int		irq;
-};
-
-#endif
-#ifdef CONFIG_PERF_EVENTS
 #define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
-#endif
-
 #endif /* _ASM_RISCV_PERF_EVENT_H */
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 3397ddac1a30..e66870a4422f 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_MODULE_SECTIONS)	+= module-sections.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= mcount-dyn.o
 
-obj-$(CONFIG_RISCV_BASE_PMU)	+= perf_event.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
diff --git a/arch/riscv/kernel/perf_event.c b/arch/riscv/kernel/perf_event.c
deleted file mode 100644
index c835f0362d94..000000000000
--- a/arch/riscv/kernel/perf_event.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2009 Jaswinder Singh Rajput
- * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
- * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
- * Copyright (C) 2009 Google, Inc., Stephane Eranian
- * Copyright 2014 Tilera Corporation. All Rights Reserved.
- * Copyright (C) 2018 Andes Technology Corporation
- *
- * Perf_events support for RISC-V platforms.
- *
- * Since the spec. (as of now, Priv-Spec 1.10) does not provide enough
- * functionality for perf event to fully work, this file provides
- * the very basic framework only.
- *
- * For platform portings, please check Documentations/riscv/pmu.txt.
- *
- * The Copyright line includes x86 and tile ones.
- */
-
-#include <linux/kprobes.h>
-#include <linux/kernel.h>
-#include <linux/kdebug.h>
-#include <linux/mutex.h>
-#include <linux/bitmap.h>
-#include <linux/irq.h>
-#include <linux/perf_event.h>
-#include <linux/atomic.h>
-#include <linux/of.h>
-#include <asm/perf_event.h>
-
-static const struct riscv_pmu *riscv_pmu __read_mostly;
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-/*
- * Hardware & cache maps and their methods
- */
-
-static const int riscv_hw_event_map[] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= RISCV_PMU_CYCLE,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= RISCV_PMU_INSTRET,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_CACHE_MISSES]		= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= RISCV_OP_UNSUPP,
-	[PERF_COUNT_HW_BUS_CYCLES]		= RISCV_OP_UNSUPP,
-};
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-static const int riscv_cache_event_map[PERF_COUNT_HW_CACHE_MAX]
-[PERF_COUNT_HW_CACHE_OP_MAX]
-[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] =  RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] =  RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)] = RISCV_OP_UNSUPP,
-			[C(RESULT_MISS)] = RISCV_OP_UNSUPP,
-		},
-	},
-};
-
-static int riscv_map_hw_event(u64 config)
-{
-	if (config >= riscv_pmu->max_events)
-		return -EINVAL;
-
-	return riscv_pmu->hw_events[config];
-}
-
-static int riscv_map_cache_decode(u64 config, unsigned int *type,
-			   unsigned int *op, unsigned int *result)
-{
-	return -ENOENT;
-}
-
-static int riscv_map_cache_event(u64 config)
-{
-	unsigned int type, op, result;
-	int err = -ENOENT;
-		int code;
-
-	err = riscv_map_cache_decode(config, &type, &op, &result);
-	if (!riscv_pmu->cache_events || err)
-		return err;
-
-	if (type >= PERF_COUNT_HW_CACHE_MAX ||
-	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
-	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	code = (*riscv_pmu->cache_events)[type][op][result];
-	if (code == RISCV_OP_UNSUPP)
-		return -EINVAL;
-
-	return code;
-}
-
-/*
- * Low-level functions: reading/writing counters
- */
-
-static inline u64 read_counter(int idx)
-{
-	u64 val = 0;
-
-	switch (idx) {
-	case RISCV_PMU_CYCLE:
-		val = csr_read(CSR_CYCLE);
-		break;
-	case RISCV_PMU_INSTRET:
-		val = csr_read(CSR_INSTRET);
-		break;
-	default:
-		WARN_ON_ONCE(idx < 0 ||	idx > RISCV_MAX_COUNTERS);
-		return -EINVAL;
-	}
-
-	return val;
-}
-
-static inline void write_counter(int idx, u64 value)
-{
-	/* currently not supported */
-	WARN_ON_ONCE(1);
-}
-
-/*
- * pmu->read: read and update the counter
- *
- * Other architectures' implementation often have a xxx_perf_event_update
- * routine, which can return counter values when called in the IRQ, but
- * return void when being called by the pmu->read method.
- */
-static void riscv_pmu_read(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	u64 prev_raw_count, new_raw_count;
-	u64 oldval;
-	int idx = hwc->idx;
-	u64 delta;
-
-	do {
-		prev_raw_count = local64_read(&hwc->prev_count);
-		new_raw_count = read_counter(idx);
-
-		oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-					 new_raw_count);
-	} while (oldval != prev_raw_count);
-
-	/*
-	 * delta is the value to update the counter we maintain in the kernel.
-	 */
-	delta = (new_raw_count - prev_raw_count) &
-		((1ULL << riscv_pmu->counter_width) - 1);
-	local64_add(delta, &event->count);
-	/*
-	 * Something like local64_sub(delta, &hwc->period_left) here is
-	 * needed if there is an interrupt for perf.
-	 */
-}
-
-/*
- * State transition functions:
- *
- * stop()/start() & add()/del()
- */
-
-/*
- * pmu->stop: stop the counter
- */
-static void riscv_pmu_stop(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
-	hwc->state |= PERF_HES_STOPPED;
-
-	if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
-		riscv_pmu->pmu->read(event);
-		hwc->state |= PERF_HES_UPTODATE;
-	}
-}
-
-/*
- * pmu->start: start the event.
- */
-static void riscv_pmu_start(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
-		return;
-
-	if (flags & PERF_EF_RELOAD) {
-		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
-
-		/*
-		 * Set the counter to the period to the next interrupt here,
-		 * if you have any.
-		 */
-	}
-
-	hwc->state = 0;
-	perf_event_update_userpage(event);
-
-	/*
-	 * Since we cannot write to counters, this serves as an initialization
-	 * to the delta-mechanism in pmu->read(); otherwise, the delta would be
-	 * wrong when pmu->read is called for the first time.
-	 */
-	local64_set(&hwc->prev_count, read_counter(hwc->idx));
-}
-
-/*
- * pmu->add: add the event to PMU.
- */
-static int riscv_pmu_add(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (cpuc->n_events == riscv_pmu->num_counters)
-		return -ENOSPC;
-
-	/*
-	 * We don't have general conunters, so no binding-event-to-counter
-	 * process here.
-	 *
-	 * Indexing using hwc->config generally not works, since config may
-	 * contain extra information, but here the only info we have in
-	 * hwc->config is the event index.
-	 */
-	hwc->idx = hwc->config;
-	cpuc->events[hwc->idx] = event;
-	cpuc->n_events++;
-
-	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
-
-	if (flags & PERF_EF_START)
-		riscv_pmu->pmu->start(event, PERF_EF_RELOAD);
-
-	return 0;
-}
-
-/*
- * pmu->del: delete the event from PMU.
- */
-static void riscv_pmu_del(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-
-	cpuc->events[hwc->idx] = NULL;
-	cpuc->n_events--;
-	riscv_pmu->pmu->stop(event, PERF_EF_UPDATE);
-	perf_event_update_userpage(event);
-}
-
-/*
- * Interrupt: a skeletion for reference.
- */
-
-static DEFINE_MUTEX(pmc_reserve_mutex);
-
-static irqreturn_t riscv_base_pmu_handle_irq(int irq_num, void *dev)
-{
-	return IRQ_NONE;
-}
-
-static int reserve_pmc_hardware(void)
-{
-	int err = 0;
-
-	mutex_lock(&pmc_reserve_mutex);
-	if (riscv_pmu->irq >= 0 && riscv_pmu->handle_irq) {
-		err = request_irq(riscv_pmu->irq, riscv_pmu->handle_irq,
-				  IRQF_PERCPU, "riscv-base-perf", NULL);
-	}
-	mutex_unlock(&pmc_reserve_mutex);
-
-	return err;
-}
-
-static void release_pmc_hardware(void)
-{
-	mutex_lock(&pmc_reserve_mutex);
-	if (riscv_pmu->irq >= 0)
-		free_irq(riscv_pmu->irq, NULL);
-	mutex_unlock(&pmc_reserve_mutex);
-}
-
-/*
- * Event Initialization/Finalization
- */
-
-static atomic_t riscv_active_events = ATOMIC_INIT(0);
-
-static void riscv_event_destroy(struct perf_event *event)
-{
-	if (atomic_dec_return(&riscv_active_events) == 0)
-		release_pmc_hardware();
-}
-
-static int riscv_event_init(struct perf_event *event)
-{
-	struct perf_event_attr *attr = &event->attr;
-	struct hw_perf_event *hwc = &event->hw;
-	int err;
-	int code;
-
-	if (atomic_inc_return(&riscv_active_events) == 1) {
-		err = reserve_pmc_hardware();
-
-		if (err) {
-			pr_warn("PMC hardware not available\n");
-			atomic_dec(&riscv_active_events);
-			return -EBUSY;
-		}
-	}
-
-	switch (event->attr.type) {
-	case PERF_TYPE_HARDWARE:
-		code = riscv_pmu->map_hw_event(attr->config);
-		break;
-	case PERF_TYPE_HW_CACHE:
-		code = riscv_pmu->map_cache_event(attr->config);
-		break;
-	case PERF_TYPE_RAW:
-		return -EOPNOTSUPP;
-	default:
-		return -ENOENT;
-	}
-
-	event->destroy = riscv_event_destroy;
-	if (code < 0) {
-		event->destroy(event);
-		return code;
-	}
-
-	/*
-	 * idx is set to -1 because the index of a general event should not be
-	 * decided until binding to some counter in pmu->add().
-	 *
-	 * But since we don't have such support, later in pmu->add(), we just
-	 * use hwc->config as the index instead.
-	 */
-	hwc->config = code;
-	hwc->idx = -1;
-
-	return 0;
-}
-
-/*
- * Initialization
- */
-
-static struct pmu min_pmu = {
-	.name		= "riscv-base",
-	.event_init	= riscv_event_init,
-	.add		= riscv_pmu_add,
-	.del		= riscv_pmu_del,
-	.start		= riscv_pmu_start,
-	.stop		= riscv_pmu_stop,
-	.read		= riscv_pmu_read,
-};
-
-static const struct riscv_pmu riscv_base_pmu = {
-	.pmu = &min_pmu,
-	.max_events = ARRAY_SIZE(riscv_hw_event_map),
-	.map_hw_event = riscv_map_hw_event,
-	.hw_events = riscv_hw_event_map,
-	.map_cache_event = riscv_map_cache_event,
-	.cache_events = &riscv_cache_event_map,
-	.counter_width = 63,
-	.num_counters = RISCV_BASE_COUNTERS + 0,
-	.handle_irq = &riscv_base_pmu_handle_irq,
-
-	/* This means this PMU has no IRQ. */
-	.irq = -1,
-};
-
-static const struct of_device_id riscv_pmu_of_ids[] = {
-	{.compatible = "riscv,base-pmu",	.data = &riscv_base_pmu},
-	{ /* sentinel value */ }
-};
-
-static int __init init_hw_perf_events(void)
-{
-	struct device_node *node = of_find_node_by_type(NULL, "pmu");
-	const struct of_device_id *of_id;
-
-	riscv_pmu = &riscv_base_pmu;
-
-	if (node) {
-		of_id = of_match_node(riscv_pmu_of_ids, node);
-
-		if (of_id)
-			riscv_pmu = of_id->data;
-		of_node_put(node);
-	}
-
-	perf_pmu_register(riscv_pmu->pmu, "cpu", PERF_TYPE_RAW);
-	return 0;
-}
-arch_initcall(init_hw_perf_events);
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 02/10] RISC-V: Add CSR encodings for all HPMCOUNTERS
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/include/asm/csr.h | 58 ++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 87ac65696871..e4d369830af4 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -89,9 +89,67 @@
 #define CSR_CYCLE		0xc00
 #define CSR_TIME		0xc01
 #define CSR_INSTRET		0xc02
+#define CSR_HPMCOUNTER3		0xc03
+#define CSR_HPMCOUNTER4		0xc04
+#define CSR_HPMCOUNTER5		0xc05
+#define CSR_HPMCOUNTER6		0xc06
+#define CSR_HPMCOUNTER7		0xc07
+#define CSR_HPMCOUNTER8		0xc08
+#define CSR_HPMCOUNTER9		0xc09
+#define CSR_HPMCOUNTER10	0xc0a
+#define CSR_HPMCOUNTER11	0xc0b
+#define CSR_HPMCOUNTER12	0xc0c
+#define CSR_HPMCOUNTER13	0xc0d
+#define CSR_HPMCOUNTER14	0xc0e
+#define CSR_HPMCOUNTER15	0xc0f
+#define CSR_HPMCOUNTER16	0xc10
+#define CSR_HPMCOUNTER17	0xc11
+#define CSR_HPMCOUNTER18	0xc12
+#define CSR_HPMCOUNTER19	0xc13
+#define CSR_HPMCOUNTER20	0xc14
+#define CSR_HPMCOUNTER21	0xc15
+#define CSR_HPMCOUNTER22	0xc16
+#define CSR_HPMCOUNTER23	0xc17
+#define CSR_HPMCOUNTER24	0xc18
+#define CSR_HPMCOUNTER25	0xc19
+#define CSR_HPMCOUNTER26	0xc1a
+#define CSR_HPMCOUNTER27	0xc1b
+#define CSR_HPMCOUNTER28	0xc1c
+#define CSR_HPMCOUNTER29	0xc1d
+#define CSR_HPMCOUNTER30	0xc1e
+#define CSR_HPMCOUNTER31	0xc1f
 #define CSR_CYCLEH		0xc80
 #define CSR_TIMEH		0xc81
 #define CSR_INSTRETH		0xc82
+#define CSR_HPMCOUNTER3H	0xc83
+#define CSR_HPMCOUNTER4H	0xc84
+#define CSR_HPMCOUNTER5H	0xc85
+#define CSR_HPMCOUNTER6H	0xc86
+#define CSR_HPMCOUNTER7H	0xc87
+#define CSR_HPMCOUNTER8H	0xc88
+#define CSR_HPMCOUNTER9H	0xc89
+#define CSR_HPMCOUNTER10H	0xc8a
+#define CSR_HPMCOUNTER11H	0xc8b
+#define CSR_HPMCOUNTER12H	0xc8c
+#define CSR_HPMCOUNTER13H	0xc8d
+#define CSR_HPMCOUNTER14H	0xc8e
+#define CSR_HPMCOUNTER15H	0xc8f
+#define CSR_HPMCOUNTER16H	0xc90
+#define CSR_HPMCOUNTER17H	0xc91
+#define CSR_HPMCOUNTER18H	0xc92
+#define CSR_HPMCOUNTER19H	0xc93
+#define CSR_HPMCOUNTER20H	0xc94
+#define CSR_HPMCOUNTER21H	0xc95
+#define CSR_HPMCOUNTER22H	0xc96
+#define CSR_HPMCOUNTER23H	0xc97
+#define CSR_HPMCOUNTER24H	0xc98
+#define CSR_HPMCOUNTER25H	0xc99
+#define CSR_HPMCOUNTER26H	0xc9a
+#define CSR_HPMCOUNTER27H	0xc9b
+#define CSR_HPMCOUNTER28H	0xc9c
+#define CSR_HPMCOUNTER29H	0xc9d
+#define CSR_HPMCOUNTER30H	0xc9e
+#define CSR_HPMCOUNTER31H	0xc9f
 
 #define CSR_SSTATUS		0x100
 #define CSR_SIE			0x104
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 02/10] RISC-V: Add CSR encodings for all HPMCOUNTERS
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/include/asm/csr.h | 58 ++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 87ac65696871..e4d369830af4 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -89,9 +89,67 @@
 #define CSR_CYCLE		0xc00
 #define CSR_TIME		0xc01
 #define CSR_INSTRET		0xc02
+#define CSR_HPMCOUNTER3		0xc03
+#define CSR_HPMCOUNTER4		0xc04
+#define CSR_HPMCOUNTER5		0xc05
+#define CSR_HPMCOUNTER6		0xc06
+#define CSR_HPMCOUNTER7		0xc07
+#define CSR_HPMCOUNTER8		0xc08
+#define CSR_HPMCOUNTER9		0xc09
+#define CSR_HPMCOUNTER10	0xc0a
+#define CSR_HPMCOUNTER11	0xc0b
+#define CSR_HPMCOUNTER12	0xc0c
+#define CSR_HPMCOUNTER13	0xc0d
+#define CSR_HPMCOUNTER14	0xc0e
+#define CSR_HPMCOUNTER15	0xc0f
+#define CSR_HPMCOUNTER16	0xc10
+#define CSR_HPMCOUNTER17	0xc11
+#define CSR_HPMCOUNTER18	0xc12
+#define CSR_HPMCOUNTER19	0xc13
+#define CSR_HPMCOUNTER20	0xc14
+#define CSR_HPMCOUNTER21	0xc15
+#define CSR_HPMCOUNTER22	0xc16
+#define CSR_HPMCOUNTER23	0xc17
+#define CSR_HPMCOUNTER24	0xc18
+#define CSR_HPMCOUNTER25	0xc19
+#define CSR_HPMCOUNTER26	0xc1a
+#define CSR_HPMCOUNTER27	0xc1b
+#define CSR_HPMCOUNTER28	0xc1c
+#define CSR_HPMCOUNTER29	0xc1d
+#define CSR_HPMCOUNTER30	0xc1e
+#define CSR_HPMCOUNTER31	0xc1f
 #define CSR_CYCLEH		0xc80
 #define CSR_TIMEH		0xc81
 #define CSR_INSTRETH		0xc82
+#define CSR_HPMCOUNTER3H	0xc83
+#define CSR_HPMCOUNTER4H	0xc84
+#define CSR_HPMCOUNTER5H	0xc85
+#define CSR_HPMCOUNTER6H	0xc86
+#define CSR_HPMCOUNTER7H	0xc87
+#define CSR_HPMCOUNTER8H	0xc88
+#define CSR_HPMCOUNTER9H	0xc89
+#define CSR_HPMCOUNTER10H	0xc8a
+#define CSR_HPMCOUNTER11H	0xc8b
+#define CSR_HPMCOUNTER12H	0xc8c
+#define CSR_HPMCOUNTER13H	0xc8d
+#define CSR_HPMCOUNTER14H	0xc8e
+#define CSR_HPMCOUNTER15H	0xc8f
+#define CSR_HPMCOUNTER16H	0xc90
+#define CSR_HPMCOUNTER17H	0xc91
+#define CSR_HPMCOUNTER18H	0xc92
+#define CSR_HPMCOUNTER19H	0xc93
+#define CSR_HPMCOUNTER20H	0xc94
+#define CSR_HPMCOUNTER21H	0xc95
+#define CSR_HPMCOUNTER22H	0xc96
+#define CSR_HPMCOUNTER23H	0xc97
+#define CSR_HPMCOUNTER24H	0xc98
+#define CSR_HPMCOUNTER25H	0xc99
+#define CSR_HPMCOUNTER26H	0xc9a
+#define CSR_HPMCOUNTER27H	0xc9b
+#define CSR_HPMCOUNTER28H	0xc9c
+#define CSR_HPMCOUNTER29H	0xc9d
+#define CSR_HPMCOUNTER30H	0xc9e
+#define CSR_HPMCOUNTER31H	0xc9f
 
 #define CSR_SSTATUS		0x100
 #define CSR_SIE			0x104
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 03/10] RISC-V: Add a perf core library for pmu drivers
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

Implement a perf core library that can support all the essential perf
features in future. It can also accommodate any type of PMU implementation
in future. Currently, both SBI based perf driver and legacy driver
implemented uses the library. Most of the common perf functionalities
are kept in this core library wile PMU specific driver can implement PMU
specific features. For example, the SBI specific functionality will be
implemented in the SBI specific driver.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 drivers/perf/Kconfig           |   8 +
 drivers/perf/Makefile          |   1 +
 drivers/perf/riscv_pmu.c       | 329 +++++++++++++++++++++++++++++++++
 include/linux/cpuhotplug.h     |   1 +
 include/linux/perf/riscv_pmu.h |  65 +++++++
 5 files changed, 404 insertions(+)
 create mode 100644 drivers/perf/riscv_pmu.c
 create mode 100644 include/linux/perf/riscv_pmu.h

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 77522e5efe11..fc42ab613ea0 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -56,6 +56,14 @@ config ARM_PMU
 	  Say y if you want to use CPU performance monitors on ARM-based
 	  systems.
 
+config RISCV_PMU
+	depends on RISCV
+	bool "RISC-V PMU framework"
+	default y
+	help
+	  Say y if you want to use CPU performance monitors on RISCV-based
+	  systems.
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 5260b116c7da..76e5c50e24bb 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
 obj-$(CONFIG_HISI_PMU) += hisilicon/
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
+obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
 obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
 obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
new file mode 100644
index 000000000000..9c4ebcabca6e
--- /dev/null
+++ b/drivers/perf/riscv_pmu.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V performance counter support.
+ *
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ * This implementation is based on old RISC-V perf and ARM perf event code
+ * which are in turn based on sparc64 and x86 code.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/perf/riscv_pmu.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+static unsigned long csr_read_num(int csr_num)
+{
+#define switchcase_csr_read(__csr_num, __val)		{\
+	case __csr_num:					\
+		__val = csr_read(__csr_num);		\
+		break; }
+#define switchcase_csr_read_2(__csr_num, __val)		{\
+	switchcase_csr_read(__csr_num + 0, __val)	 \
+	switchcase_csr_read(__csr_num + 1, __val)}
+#define switchcase_csr_read_4(__csr_num, __val)		{\
+	switchcase_csr_read_2(__csr_num + 0, __val)	 \
+	switchcase_csr_read_2(__csr_num + 2, __val)}
+#define switchcase_csr_read_8(__csr_num, __val)		{\
+	switchcase_csr_read_4(__csr_num + 0, __val)	 \
+	switchcase_csr_read_4(__csr_num + 4, __val)}
+#define switchcase_csr_read_16(__csr_num, __val)	{\
+	switchcase_csr_read_8(__csr_num + 0, __val)	 \
+	switchcase_csr_read_8(__csr_num + 8, __val)}
+#define switchcase_csr_read_32(__csr_num, __val)	{\
+	switchcase_csr_read_16(__csr_num + 0, __val)	 \
+	switchcase_csr_read_16(__csr_num + 16, __val)}
+
+	unsigned long ret = 0;
+
+	switch (csr_num) {
+	switchcase_csr_read_32(CSR_CYCLE, ret)
+	switchcase_csr_read_32(CSR_CYCLEH, ret)
+	default :
+		break;
+	}
+
+	return ret;
+#undef switchcase_csr_read_32
+#undef switchcase_csr_read_16
+#undef switchcase_csr_read_8
+#undef switchcase_csr_read_4
+#undef switchcase_csr_read_2
+#undef switchcase_csr_read
+}
+
+/*
+ * Read the CSR of a corresponding counter.
+ */
+unsigned long riscv_pmu_ctr_read_csr(unsigned long csr)
+{
+	if (csr < CSR_CYCLE || csr > CSR_HPMCOUNTER31H ||
+	   (csr > CSR_HPMCOUNTER31 && csr < CSR_CYCLEH)) {
+		pr_err("Invalid performance counter csr %lx\n", csr);
+		return -EINVAL;
+	}
+
+	return csr_read_num(csr);
+}
+
+static uint64_t riscv_pmu_ctr_get_mask(struct perf_event *event)
+{
+	int cwidth;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (!rvpmu->ctr_get_width)
+	/**
+	 * If the pmu driver doesn't support counter width, set it to default maximum
+	 * allowed by the specification.
+	 */
+		cwidth = 63;
+	else {
+		if (hwc->idx == -1)
+			/* Handle init case where idx is not initialized yet */
+			cwidth = rvpmu->ctr_get_width(0);
+		else
+			cwidth = rvpmu->ctr_get_width(hwc->idx);
+	}
+
+	return GENMASK_ULL(cwidth, 0);
+}
+
+u64 riscv_pmu_event_update(struct perf_event *event)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 prev_raw_count, new_raw_count;
+	unsigned long cmask;
+	u64 oldval, delta;
+
+	if (!rvpmu->ctr_read)
+		return 0;
+
+	cmask = riscv_pmu_ctr_get_mask(event);
+
+	do {
+		prev_raw_count = local64_read(&hwc->prev_count);
+		new_raw_count = rvpmu->ctr_read(event);
+		oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+					 new_raw_count);
+	} while (oldval != prev_raw_count);
+
+	delta = (new_raw_count - prev_raw_count) & cmask;
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+
+	return delta;
+}
+
+static void riscv_pmu_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+
+	WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
+
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		if (rvpmu->ctr_stop) {
+			rvpmu->ctr_stop(event, 0);
+			hwc->state |= PERF_HES_STOPPED;
+		}
+		riscv_pmu_event_update(event);
+		hwc->state |= PERF_HES_UPTODATE;
+	}
+}
+
+int riscv_pmu_event_set_period(struct perf_event *event, u64 *init_val)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	s64 left = local64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	u64 max_period;
+	int ret = 0;
+	uint64_t cmask = riscv_pmu_ctr_get_mask(event);
+
+	max_period = cmask;
+	if (unlikely(left <= -period)) {
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	/*
+	 * Limit the maximum period to prevent the counter value
+	 * from overtaking the one we are about to program. In
+	 * effect we are reducing max_period to account for
+	 * interrupt latency (and we are being very conservative).
+	 */
+	if (left > (max_period >> 1))
+		left = (max_period >> 1);
+
+	local64_set(&hwc->prev_count, (u64)-left);
+	*init_val = (u64)(-left) & max_period;
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static void riscv_pmu_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	u64 init_val;
+
+	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+		return;
+
+	if (flags & PERF_EF_RELOAD) {
+		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+
+		/*
+		 * Set the counter to the period to the next interrupt here,
+		 * if you have any.
+		 */
+	}
+
+	hwc->state = 0;
+	riscv_pmu_event_set_period(event, &init_val);
+	rvpmu->ctr_start(event, init_val);
+	perf_event_update_userpage(event);
+}
+
+static int riscv_pmu_add(struct perf_event *event, int flags)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	idx = rvpmu->ctr_get_idx(event);
+	if (idx < 0)
+		return idx;
+
+	hwc->idx = idx;
+	cpuc->events[idx] = event;
+	cpuc->n_events++;
+	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+	if (flags & PERF_EF_START)
+		riscv_pmu_start(event, PERF_EF_RELOAD);
+
+	/* Propagate our changes to the userspace mapping. */
+	perf_event_update_userpage(event);
+
+	return 0;
+}
+
+static void riscv_pmu_del(struct perf_event *event, int flags)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+
+	riscv_pmu_stop(event, PERF_EF_UPDATE);
+	cpuc->events[hwc->idx] = NULL;
+	/* The firmware need to reset the counter mapping */
+	if (rvpmu->ctr_stop)
+		rvpmu->ctr_stop(event, RISCV_PMU_STOP_FLAG_RESET);
+	cpuc->n_events--;
+	if (rvpmu->ctr_clear_idx)
+		rvpmu->ctr_clear_idx(event);
+	perf_event_update_userpage(event);
+	hwc->idx = -1;
+}
+
+static void riscv_pmu_read(struct perf_event *event)
+{
+	riscv_pmu_event_update(event);
+}
+
+static int riscv_pmu_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	int mapped_event;
+	u64 event_config = 0;
+	uint64_t cmask;
+
+	hwc->flags = 0;
+	mapped_event = rvpmu->event_map(event, &event_config);
+	if (mapped_event < 0) {
+		pr_debug("event %x:%llx not supported\n", event->attr.type,
+			 event->attr.config);
+		return mapped_event;
+	}
+
+	/*
+	 * idx is set to -1 because the index of a general event should not be
+	 * decided until binding to some counter in pmu->add().
+	 * config will contain the information about counter CSR
+	 * the idx will contain the counter index
+	 */
+	hwc->config = event_config;
+	hwc->idx = -1;
+	hwc->event_base = mapped_event;
+
+	if (!is_sampling_event(event)) {
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		cmask = riscv_pmu_ctr_get_mask(event);
+		hwc->sample_period  =  cmask >> 1;
+		hwc->last_period    = hwc->sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	return 0;
+}
+
+struct riscv_pmu *riscv_pmu_alloc(void)
+{
+	struct riscv_pmu *pmu;
+	int cpuid, i;
+	struct cpu_hw_events *cpuc;
+
+	pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
+	if (!pmu)
+		goto out;
+
+	pmu->hw_events = alloc_percpu_gfp(struct cpu_hw_events, GFP_KERNEL);
+	if (!pmu->hw_events) {
+		pr_info("failed to allocate per-cpu PMU data.\n");
+		goto out_free_pmu;
+	}
+
+	for_each_possible_cpu(cpuid) {
+		cpuc = per_cpu_ptr(pmu->hw_events, cpuid);
+		cpuc->n_events = 0;
+		for (i = 0; i < RISCV_MAX_COUNTERS; i++)
+			cpuc->events[i] = NULL;
+	}
+	pmu->pmu = (struct pmu) {
+		.event_init	= riscv_pmu_event_init,
+		.add		= riscv_pmu_add,
+		.del		= riscv_pmu_del,
+		.start		= riscv_pmu_start,
+		.stop		= riscv_pmu_stop,
+		.read		= riscv_pmu_read,
+	};
+
+	return pmu;
+
+out_free_pmu:
+	kfree(pmu);
+out:
+	return NULL;
+}
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 39cf84a30b9f..1743b8a4624d 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -123,6 +123,7 @@ enum cpuhp_state {
 	CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
 	CPUHP_AP_PERF_ARM_ACPI_STARTING,
 	CPUHP_AP_PERF_ARM_STARTING,
+	CPUHP_AP_PERF_RISCV_STARTING,
 	CPUHP_AP_ARM_L2X0_STARTING,
 	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_ARCH_TIMER_STARTING,
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
new file mode 100644
index 000000000000..564129839e19
--- /dev/null
+++ b/include/linux/perf/riscv_pmu.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 SiFive
+ * Copyright (C) 2018 Andes Technology Corporation
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ */
+
+#ifndef _ASM_RISCV_PERF_EVENT_H
+#define _ASM_RISCV_PERF_EVENT_H
+
+#include <linux/perf_event.h>
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+
+#ifdef CONFIG_RISCV_PMU
+
+/*
+ * The RISCV_MAX_COUNTERS parameter should be specified.
+ */
+
+#define RISCV_MAX_COUNTERS	64
+#define RISCV_OP_UNSUPP		(-EOPNOTSUPP)
+#define RISCV_PMU_PDEV_NAME	"riscv-pmu"
+
+#define RISCV_PMU_STOP_FLAG_RESET 1
+
+struct cpu_hw_events {
+	/* currently enabled events */
+	int			n_events;
+	/* currently enabled events */
+	struct perf_event	*events[RISCV_MAX_COUNTERS];
+	/* currently enabled counters */
+	DECLARE_BITMAP(used_event_ctrs, RISCV_MAX_COUNTERS);
+};
+
+struct riscv_pmu {
+	struct pmu	pmu;
+	char		*name;
+
+	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
+	int		irq;
+
+	int		num_counters;
+	u64		(*ctr_read)(struct perf_event *event);
+	int		(*ctr_get_idx)(struct perf_event *event);
+	int		(*ctr_get_width)(int idx);
+	void		(*ctr_clear_idx)(struct perf_event *event);
+	void		(*ctr_start)(struct perf_event *event, u64 init_val);
+	void		(*ctr_stop)(struct perf_event *event, unsigned long flag);
+	int		(*event_map)(struct perf_event *event, u64 *config);
+
+	struct cpu_hw_events	__percpu *hw_events;
+	struct hlist_node	node;
+};
+
+#define to_riscv_pmu(p) (container_of(p, struct riscv_pmu, pmu))
+unsigned long riscv_pmu_ctr_read_csr(unsigned long csr);
+int riscv_pmu_event_set_period(struct perf_event *event, u64 *init_val);
+u64 riscv_pmu_event_update(struct perf_event *event);
+struct riscv_pmu *riscv_pmu_alloc(void);
+
+#endif /* CONFIG_RISCV_PMU */
+
+#endif /* _ASM_RISCV_PERF_EVENT_H */
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 03/10] RISC-V: Add a perf core library for pmu drivers
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

Implement a perf core library that can support all the essential perf
features in future. It can also accommodate any type of PMU implementation
in future. Currently, both SBI based perf driver and legacy driver
implemented uses the library. Most of the common perf functionalities
are kept in this core library wile PMU specific driver can implement PMU
specific features. For example, the SBI specific functionality will be
implemented in the SBI specific driver.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 drivers/perf/Kconfig           |   8 +
 drivers/perf/Makefile          |   1 +
 drivers/perf/riscv_pmu.c       | 329 +++++++++++++++++++++++++++++++++
 include/linux/cpuhotplug.h     |   1 +
 include/linux/perf/riscv_pmu.h |  65 +++++++
 5 files changed, 404 insertions(+)
 create mode 100644 drivers/perf/riscv_pmu.c
 create mode 100644 include/linux/perf/riscv_pmu.h

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 77522e5efe11..fc42ab613ea0 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -56,6 +56,14 @@ config ARM_PMU
 	  Say y if you want to use CPU performance monitors on ARM-based
 	  systems.
 
+config RISCV_PMU
+	depends on RISCV
+	bool "RISC-V PMU framework"
+	default y
+	help
+	  Say y if you want to use CPU performance monitors on RISCV-based
+	  systems.
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 5260b116c7da..76e5c50e24bb 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_FSL_IMX8_DDR_PMU) += fsl_imx8_ddr_perf.o
 obj-$(CONFIG_HISI_PMU) += hisilicon/
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
+obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
 obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
 obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
new file mode 100644
index 000000000000..9c4ebcabca6e
--- /dev/null
+++ b/drivers/perf/riscv_pmu.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V performance counter support.
+ *
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ * This implementation is based on old RISC-V perf and ARM perf event code
+ * which are in turn based on sparc64 and x86 code.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/perf/riscv_pmu.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+static unsigned long csr_read_num(int csr_num)
+{
+#define switchcase_csr_read(__csr_num, __val)		{\
+	case __csr_num:					\
+		__val = csr_read(__csr_num);		\
+		break; }
+#define switchcase_csr_read_2(__csr_num, __val)		{\
+	switchcase_csr_read(__csr_num + 0, __val)	 \
+	switchcase_csr_read(__csr_num + 1, __val)}
+#define switchcase_csr_read_4(__csr_num, __val)		{\
+	switchcase_csr_read_2(__csr_num + 0, __val)	 \
+	switchcase_csr_read_2(__csr_num + 2, __val)}
+#define switchcase_csr_read_8(__csr_num, __val)		{\
+	switchcase_csr_read_4(__csr_num + 0, __val)	 \
+	switchcase_csr_read_4(__csr_num + 4, __val)}
+#define switchcase_csr_read_16(__csr_num, __val)	{\
+	switchcase_csr_read_8(__csr_num + 0, __val)	 \
+	switchcase_csr_read_8(__csr_num + 8, __val)}
+#define switchcase_csr_read_32(__csr_num, __val)	{\
+	switchcase_csr_read_16(__csr_num + 0, __val)	 \
+	switchcase_csr_read_16(__csr_num + 16, __val)}
+
+	unsigned long ret = 0;
+
+	switch (csr_num) {
+	switchcase_csr_read_32(CSR_CYCLE, ret)
+	switchcase_csr_read_32(CSR_CYCLEH, ret)
+	default :
+		break;
+	}
+
+	return ret;
+#undef switchcase_csr_read_32
+#undef switchcase_csr_read_16
+#undef switchcase_csr_read_8
+#undef switchcase_csr_read_4
+#undef switchcase_csr_read_2
+#undef switchcase_csr_read
+}
+
+/*
+ * Read the CSR of a corresponding counter.
+ */
+unsigned long riscv_pmu_ctr_read_csr(unsigned long csr)
+{
+	if (csr < CSR_CYCLE || csr > CSR_HPMCOUNTER31H ||
+	   (csr > CSR_HPMCOUNTER31 && csr < CSR_CYCLEH)) {
+		pr_err("Invalid performance counter csr %lx\n", csr);
+		return -EINVAL;
+	}
+
+	return csr_read_num(csr);
+}
+
+static uint64_t riscv_pmu_ctr_get_mask(struct perf_event *event)
+{
+	int cwidth;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (!rvpmu->ctr_get_width)
+	/**
+	 * If the pmu driver doesn't support counter width, set it to default maximum
+	 * allowed by the specification.
+	 */
+		cwidth = 63;
+	else {
+		if (hwc->idx == -1)
+			/* Handle init case where idx is not initialized yet */
+			cwidth = rvpmu->ctr_get_width(0);
+		else
+			cwidth = rvpmu->ctr_get_width(hwc->idx);
+	}
+
+	return GENMASK_ULL(cwidth, 0);
+}
+
+u64 riscv_pmu_event_update(struct perf_event *event)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 prev_raw_count, new_raw_count;
+	unsigned long cmask;
+	u64 oldval, delta;
+
+	if (!rvpmu->ctr_read)
+		return 0;
+
+	cmask = riscv_pmu_ctr_get_mask(event);
+
+	do {
+		prev_raw_count = local64_read(&hwc->prev_count);
+		new_raw_count = rvpmu->ctr_read(event);
+		oldval = local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+					 new_raw_count);
+	} while (oldval != prev_raw_count);
+
+	delta = (new_raw_count - prev_raw_count) & cmask;
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+
+	return delta;
+}
+
+static void riscv_pmu_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+
+	WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
+
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		if (rvpmu->ctr_stop) {
+			rvpmu->ctr_stop(event, 0);
+			hwc->state |= PERF_HES_STOPPED;
+		}
+		riscv_pmu_event_update(event);
+		hwc->state |= PERF_HES_UPTODATE;
+	}
+}
+
+int riscv_pmu_event_set_period(struct perf_event *event, u64 *init_val)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	s64 left = local64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	u64 max_period;
+	int ret = 0;
+	uint64_t cmask = riscv_pmu_ctr_get_mask(event);
+
+	max_period = cmask;
+	if (unlikely(left <= -period)) {
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	/*
+	 * Limit the maximum period to prevent the counter value
+	 * from overtaking the one we are about to program. In
+	 * effect we are reducing max_period to account for
+	 * interrupt latency (and we are being very conservative).
+	 */
+	if (left > (max_period >> 1))
+		left = (max_period >> 1);
+
+	local64_set(&hwc->prev_count, (u64)-left);
+	*init_val = (u64)(-left) & max_period;
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static void riscv_pmu_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	u64 init_val;
+
+	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+		return;
+
+	if (flags & PERF_EF_RELOAD) {
+		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+
+		/*
+		 * Set the counter to the period to the next interrupt here,
+		 * if you have any.
+		 */
+	}
+
+	hwc->state = 0;
+	riscv_pmu_event_set_period(event, &init_val);
+	rvpmu->ctr_start(event, init_val);
+	perf_event_update_userpage(event);
+}
+
+static int riscv_pmu_add(struct perf_event *event, int flags)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	idx = rvpmu->ctr_get_idx(event);
+	if (idx < 0)
+		return idx;
+
+	hwc->idx = idx;
+	cpuc->events[idx] = event;
+	cpuc->n_events++;
+	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+	if (flags & PERF_EF_START)
+		riscv_pmu_start(event, PERF_EF_RELOAD);
+
+	/* Propagate our changes to the userspace mapping. */
+	perf_event_update_userpage(event);
+
+	return 0;
+}
+
+static void riscv_pmu_del(struct perf_event *event, int flags)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+
+	riscv_pmu_stop(event, PERF_EF_UPDATE);
+	cpuc->events[hwc->idx] = NULL;
+	/* The firmware need to reset the counter mapping */
+	if (rvpmu->ctr_stop)
+		rvpmu->ctr_stop(event, RISCV_PMU_STOP_FLAG_RESET);
+	cpuc->n_events--;
+	if (rvpmu->ctr_clear_idx)
+		rvpmu->ctr_clear_idx(event);
+	perf_event_update_userpage(event);
+	hwc->idx = -1;
+}
+
+static void riscv_pmu_read(struct perf_event *event)
+{
+	riscv_pmu_event_update(event);
+}
+
+static int riscv_pmu_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	int mapped_event;
+	u64 event_config = 0;
+	uint64_t cmask;
+
+	hwc->flags = 0;
+	mapped_event = rvpmu->event_map(event, &event_config);
+	if (mapped_event < 0) {
+		pr_debug("event %x:%llx not supported\n", event->attr.type,
+			 event->attr.config);
+		return mapped_event;
+	}
+
+	/*
+	 * idx is set to -1 because the index of a general event should not be
+	 * decided until binding to some counter in pmu->add().
+	 * config will contain the information about counter CSR
+	 * the idx will contain the counter index
+	 */
+	hwc->config = event_config;
+	hwc->idx = -1;
+	hwc->event_base = mapped_event;
+
+	if (!is_sampling_event(event)) {
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		cmask = riscv_pmu_ctr_get_mask(event);
+		hwc->sample_period  =  cmask >> 1;
+		hwc->last_period    = hwc->sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	return 0;
+}
+
+struct riscv_pmu *riscv_pmu_alloc(void)
+{
+	struct riscv_pmu *pmu;
+	int cpuid, i;
+	struct cpu_hw_events *cpuc;
+
+	pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
+	if (!pmu)
+		goto out;
+
+	pmu->hw_events = alloc_percpu_gfp(struct cpu_hw_events, GFP_KERNEL);
+	if (!pmu->hw_events) {
+		pr_info("failed to allocate per-cpu PMU data.\n");
+		goto out_free_pmu;
+	}
+
+	for_each_possible_cpu(cpuid) {
+		cpuc = per_cpu_ptr(pmu->hw_events, cpuid);
+		cpuc->n_events = 0;
+		for (i = 0; i < RISCV_MAX_COUNTERS; i++)
+			cpuc->events[i] = NULL;
+	}
+	pmu->pmu = (struct pmu) {
+		.event_init	= riscv_pmu_event_init,
+		.add		= riscv_pmu_add,
+		.del		= riscv_pmu_del,
+		.start		= riscv_pmu_start,
+		.stop		= riscv_pmu_stop,
+		.read		= riscv_pmu_read,
+	};
+
+	return pmu;
+
+out_free_pmu:
+	kfree(pmu);
+out:
+	return NULL;
+}
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 39cf84a30b9f..1743b8a4624d 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -123,6 +123,7 @@ enum cpuhp_state {
 	CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
 	CPUHP_AP_PERF_ARM_ACPI_STARTING,
 	CPUHP_AP_PERF_ARM_STARTING,
+	CPUHP_AP_PERF_RISCV_STARTING,
 	CPUHP_AP_ARM_L2X0_STARTING,
 	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_ARCH_TIMER_STARTING,
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
new file mode 100644
index 000000000000..564129839e19
--- /dev/null
+++ b/include/linux/perf/riscv_pmu.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 SiFive
+ * Copyright (C) 2018 Andes Technology Corporation
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ */
+
+#ifndef _ASM_RISCV_PERF_EVENT_H
+#define _ASM_RISCV_PERF_EVENT_H
+
+#include <linux/perf_event.h>
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+
+#ifdef CONFIG_RISCV_PMU
+
+/*
+ * The RISCV_MAX_COUNTERS parameter should be specified.
+ */
+
+#define RISCV_MAX_COUNTERS	64
+#define RISCV_OP_UNSUPP		(-EOPNOTSUPP)
+#define RISCV_PMU_PDEV_NAME	"riscv-pmu"
+
+#define RISCV_PMU_STOP_FLAG_RESET 1
+
+struct cpu_hw_events {
+	/* currently enabled events */
+	int			n_events;
+	/* currently enabled events */
+	struct perf_event	*events[RISCV_MAX_COUNTERS];
+	/* currently enabled counters */
+	DECLARE_BITMAP(used_event_ctrs, RISCV_MAX_COUNTERS);
+};
+
+struct riscv_pmu {
+	struct pmu	pmu;
+	char		*name;
+
+	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
+	int		irq;
+
+	int		num_counters;
+	u64		(*ctr_read)(struct perf_event *event);
+	int		(*ctr_get_idx)(struct perf_event *event);
+	int		(*ctr_get_width)(int idx);
+	void		(*ctr_clear_idx)(struct perf_event *event);
+	void		(*ctr_start)(struct perf_event *event, u64 init_val);
+	void		(*ctr_stop)(struct perf_event *event, unsigned long flag);
+	int		(*event_map)(struct perf_event *event, u64 *config);
+
+	struct cpu_hw_events	__percpu *hw_events;
+	struct hlist_node	node;
+};
+
+#define to_riscv_pmu(p) (container_of(p, struct riscv_pmu, pmu))
+unsigned long riscv_pmu_ctr_read_csr(unsigned long csr);
+int riscv_pmu_event_set_period(struct perf_event *event, u64 *init_val);
+u64 riscv_pmu_event_update(struct perf_event *event);
+struct riscv_pmu *riscv_pmu_alloc(void);
+
+#endif /* CONFIG_RISCV_PMU */
+
+#endif /* _ASM_RISCV_PERF_EVENT_H */
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 04/10] RISC-V: Add a simple platform driver for RISC-V legacy perf
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The old RISC-V perf implementation allowed counting of only
cycle/instruction counters using perf. Restore that feature by implementing
a simple platform driver under a separate config to provide backward
compatibility. Any existing software stack will continue to work as it is.
However, it provides an easy way out in future where we can remove the
legacy driver.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 drivers/perf/Kconfig            |   9 ++
 drivers/perf/Makefile           |   3 +
 drivers/perf/riscv_pmu_legacy.c | 143 ++++++++++++++++++++++++++++++++
 include/linux/perf/riscv_pmu.h  |   2 +
 4 files changed, 157 insertions(+)
 create mode 100644 drivers/perf/riscv_pmu_legacy.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index fc42ab613ea0..1546a487d970 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -64,6 +64,15 @@ config RISCV_PMU
 	  Say y if you want to use CPU performance monitors on RISCV-based
 	  systems.
 
+config RISCV_PMU_LEGACY
+	depends on RISCV_PMU
+	bool "RISC-V legacy PMU implementation"
+	default y
+	help
+	  Say y if you want to use the legacy CPU performance monitor
+	  implementation on RISC-V based systems. This only allows counting
+	  of cycle/instruction counter and will be removed in future.
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 76e5c50e24bb..e8aa666a9d28 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -11,6 +11,9 @@ obj-$(CONFIG_HISI_PMU) += hisilicon/
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
 obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
+ifeq ($(CONFIG_RISCV_PMU), y)
+obj-$(CONFIG_RISCV_PMU_LEGACY) += riscv_pmu_legacy.o
+endif
 obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
 obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
diff --git a/drivers/perf/riscv_pmu_legacy.c b/drivers/perf/riscv_pmu_legacy.c
new file mode 100644
index 000000000000..8bb973f2d9f7
--- /dev/null
+++ b/drivers/perf/riscv_pmu_legacy.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V performance counter support.
+ *
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ * This implementation is based on old RISC-V perf and ARM perf event code
+ * which are in turn based on sparc64 and x86 code.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/perf/riscv_pmu.h>
+#include <linux/platform_device.h>
+
+#define RISCV_PMU_LEGACY_CYCLE		0
+#define RISCV_PMU_LEGACY_INSTRET	1
+#define RISCV_PMU_LEGACY_NUM_CTR	2
+
+bool pmu_init_done;
+
+static int pmu_legacy_ctr_get_idx(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+
+	if (event->attr.type != PERF_TYPE_HARDWARE)
+		return -EOPNOTSUPP;
+	if (attr->config == PERF_COUNT_HW_CPU_CYCLES)
+		return RISCV_PMU_LEGACY_CYCLE;
+	else if (attr->config == PERF_COUNT_HW_INSTRUCTIONS)
+		return RISCV_PMU_LEGACY_INSTRET;
+	else
+		return -EOPNOTSUPP;
+}
+
+/* For legacy config & counter index are same */
+static int pmu_legacy_event_map(struct perf_event *event, u64 *config)
+{
+	return pmu_legacy_ctr_get_idx(event);
+}
+
+static u64 pmu_legacy_read_ctr(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	u64 val;
+
+	if (idx == RISCV_PMU_LEGACY_CYCLE) {
+		val = riscv_pmu_ctr_read_csr(CSR_CYCLE);
+		if (IS_ENABLED(CONFIG_32BIT))
+			val = (u64)riscv_pmu_ctr_read_csr(CSR_CYCLEH) << 32 | val;
+	} else if (idx == RISCV_PMU_LEGACY_INSTRET) {
+		val = riscv_pmu_ctr_read_csr(CSR_INSTRET);
+		if (IS_ENABLED(CONFIG_32BIT))
+			val = ((u64)riscv_pmu_ctr_read_csr(CSR_INSTRETH)) << 32 | val;
+	} else
+		return 0;
+
+	return val;
+}
+
+static void pmu_legacy_ctr_start(struct perf_event *event, u64 ival)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	u64 initial_val = pmu_legacy_read_ctr(event);
+
+	/**
+	 * The legacy method doesn't really have a start/stop method.
+	 * It also can not update the counter with a initial value.
+	 * But we still need to set the prev_count so that read() can compute
+	 * the delta. Just use the current counter value to set the prev_count.
+	 */
+	local64_set(&hwc->prev_count, initial_val);
+}
+
+/**
+ * This is just a simple implementation to allow legacy implementations
+ * compatible with new RISC-V PMU driver framework.
+ * This driver only allows reading two counters i.e CYCLE & INSTRET.
+ * However, it can not start or stop the counter. Thus, it is not very useful
+ * will be removed in future.
+ */
+static void pmu_legacy_init(struct riscv_pmu *pmu)
+{
+	pr_info("Legacy PMU implementation is available\n");
+
+	pmu->num_counters = RISCV_PMU_LEGACY_NUM_CTR;
+	pmu->ctr_start = pmu_legacy_ctr_start;
+	pmu->ctr_stop = NULL;
+	pmu->event_map = pmu_legacy_event_map;
+	pmu->ctr_get_idx = pmu_legacy_ctr_get_idx;
+	pmu->ctr_get_width = NULL;
+	pmu->ctr_clear_idx = NULL;
+	pmu->ctr_read = pmu_legacy_read_ctr;
+
+	perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW);
+}
+
+static int pmu_legacy_device_probe(struct platform_device *pdev)
+{
+	struct riscv_pmu *pmu = NULL;
+
+	pmu = riscv_pmu_alloc();
+	if (!pmu)
+		return -ENOMEM;
+	pmu_legacy_init(pmu);
+
+	return 0;
+}
+
+static struct platform_driver pmu_legacy_driver = {
+	.probe		= pmu_legacy_device_probe,
+	.driver		= {
+		.name	= RISCV_PMU_LEGACY_PDEV_NAME,
+	},
+};
+
+static int __init riscv_pmu_legacy_devinit(void)
+{
+	int ret;
+	struct platform_device *pdev;
+
+	if (likely(pmu_init_done))
+		return 0;
+
+	ret = platform_driver_register(&pmu_legacy_driver);
+	if (ret)
+		return ret;
+
+	pdev = platform_device_register_simple(RISCV_PMU_LEGACY_PDEV_NAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&pmu_legacy_driver);
+		return PTR_ERR(pdev);
+	}
+
+	return ret;
+}
+late_initcall(riscv_pmu_legacy_devinit);
+
+void riscv_pmu_legacy_init(bool done)
+{
+	if (done)
+		pmu_init_done = true;
+}
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index 564129839e19..f3bce79d8998 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -22,6 +22,7 @@
 #define RISCV_MAX_COUNTERS	64
 #define RISCV_OP_UNSUPP		(-EOPNOTSUPP)
 #define RISCV_PMU_PDEV_NAME	"riscv-pmu"
+#define RISCV_PMU_LEGACY_PDEV_NAME	"riscv-pmu-legacy"
 
 #define RISCV_PMU_STOP_FLAG_RESET 1
 
@@ -58,6 +59,7 @@ struct riscv_pmu {
 unsigned long riscv_pmu_ctr_read_csr(unsigned long csr);
 int riscv_pmu_event_set_period(struct perf_event *event, u64 *init_val);
 u64 riscv_pmu_event_update(struct perf_event *event);
+void riscv_pmu_legacy_init(bool init_done);
 struct riscv_pmu *riscv_pmu_alloc(void);
 
 #endif /* CONFIG_RISCV_PMU */
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 04/10] RISC-V: Add a simple platform driver for RISC-V legacy perf
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The old RISC-V perf implementation allowed counting of only
cycle/instruction counters using perf. Restore that feature by implementing
a simple platform driver under a separate config to provide backward
compatibility. Any existing software stack will continue to work as it is.
However, it provides an easy way out in future where we can remove the
legacy driver.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 drivers/perf/Kconfig            |   9 ++
 drivers/perf/Makefile           |   3 +
 drivers/perf/riscv_pmu_legacy.c | 143 ++++++++++++++++++++++++++++++++
 include/linux/perf/riscv_pmu.h  |   2 +
 4 files changed, 157 insertions(+)
 create mode 100644 drivers/perf/riscv_pmu_legacy.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index fc42ab613ea0..1546a487d970 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -64,6 +64,15 @@ config RISCV_PMU
 	  Say y if you want to use CPU performance monitors on RISCV-based
 	  systems.
 
+config RISCV_PMU_LEGACY
+	depends on RISCV_PMU
+	bool "RISC-V legacy PMU implementation"
+	default y
+	help
+	  Say y if you want to use the legacy CPU performance monitor
+	  implementation on RISC-V based systems. This only allows counting
+	  of cycle/instruction counter and will be removed in future.
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 76e5c50e24bb..e8aa666a9d28 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -11,6 +11,9 @@ obj-$(CONFIG_HISI_PMU) += hisilicon/
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
 obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
+ifeq ($(CONFIG_RISCV_PMU), y)
+obj-$(CONFIG_RISCV_PMU_LEGACY) += riscv_pmu_legacy.o
+endif
 obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
 obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
diff --git a/drivers/perf/riscv_pmu_legacy.c b/drivers/perf/riscv_pmu_legacy.c
new file mode 100644
index 000000000000..8bb973f2d9f7
--- /dev/null
+++ b/drivers/perf/riscv_pmu_legacy.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V performance counter support.
+ *
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ * This implementation is based on old RISC-V perf and ARM perf event code
+ * which are in turn based on sparc64 and x86 code.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/perf/riscv_pmu.h>
+#include <linux/platform_device.h>
+
+#define RISCV_PMU_LEGACY_CYCLE		0
+#define RISCV_PMU_LEGACY_INSTRET	1
+#define RISCV_PMU_LEGACY_NUM_CTR	2
+
+bool pmu_init_done;
+
+static int pmu_legacy_ctr_get_idx(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+
+	if (event->attr.type != PERF_TYPE_HARDWARE)
+		return -EOPNOTSUPP;
+	if (attr->config == PERF_COUNT_HW_CPU_CYCLES)
+		return RISCV_PMU_LEGACY_CYCLE;
+	else if (attr->config == PERF_COUNT_HW_INSTRUCTIONS)
+		return RISCV_PMU_LEGACY_INSTRET;
+	else
+		return -EOPNOTSUPP;
+}
+
+/* For legacy config & counter index are same */
+static int pmu_legacy_event_map(struct perf_event *event, u64 *config)
+{
+	return pmu_legacy_ctr_get_idx(event);
+}
+
+static u64 pmu_legacy_read_ctr(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	u64 val;
+
+	if (idx == RISCV_PMU_LEGACY_CYCLE) {
+		val = riscv_pmu_ctr_read_csr(CSR_CYCLE);
+		if (IS_ENABLED(CONFIG_32BIT))
+			val = (u64)riscv_pmu_ctr_read_csr(CSR_CYCLEH) << 32 | val;
+	} else if (idx == RISCV_PMU_LEGACY_INSTRET) {
+		val = riscv_pmu_ctr_read_csr(CSR_INSTRET);
+		if (IS_ENABLED(CONFIG_32BIT))
+			val = ((u64)riscv_pmu_ctr_read_csr(CSR_INSTRETH)) << 32 | val;
+	} else
+		return 0;
+
+	return val;
+}
+
+static void pmu_legacy_ctr_start(struct perf_event *event, u64 ival)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	u64 initial_val = pmu_legacy_read_ctr(event);
+
+	/**
+	 * The legacy method doesn't really have a start/stop method.
+	 * It also can not update the counter with a initial value.
+	 * But we still need to set the prev_count so that read() can compute
+	 * the delta. Just use the current counter value to set the prev_count.
+	 */
+	local64_set(&hwc->prev_count, initial_val);
+}
+
+/**
+ * This is just a simple implementation to allow legacy implementations
+ * compatible with new RISC-V PMU driver framework.
+ * This driver only allows reading two counters i.e CYCLE & INSTRET.
+ * However, it can not start or stop the counter. Thus, it is not very useful
+ * will be removed in future.
+ */
+static void pmu_legacy_init(struct riscv_pmu *pmu)
+{
+	pr_info("Legacy PMU implementation is available\n");
+
+	pmu->num_counters = RISCV_PMU_LEGACY_NUM_CTR;
+	pmu->ctr_start = pmu_legacy_ctr_start;
+	pmu->ctr_stop = NULL;
+	pmu->event_map = pmu_legacy_event_map;
+	pmu->ctr_get_idx = pmu_legacy_ctr_get_idx;
+	pmu->ctr_get_width = NULL;
+	pmu->ctr_clear_idx = NULL;
+	pmu->ctr_read = pmu_legacy_read_ctr;
+
+	perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW);
+}
+
+static int pmu_legacy_device_probe(struct platform_device *pdev)
+{
+	struct riscv_pmu *pmu = NULL;
+
+	pmu = riscv_pmu_alloc();
+	if (!pmu)
+		return -ENOMEM;
+	pmu_legacy_init(pmu);
+
+	return 0;
+}
+
+static struct platform_driver pmu_legacy_driver = {
+	.probe		= pmu_legacy_device_probe,
+	.driver		= {
+		.name	= RISCV_PMU_LEGACY_PDEV_NAME,
+	},
+};
+
+static int __init riscv_pmu_legacy_devinit(void)
+{
+	int ret;
+	struct platform_device *pdev;
+
+	if (likely(pmu_init_done))
+		return 0;
+
+	ret = platform_driver_register(&pmu_legacy_driver);
+	if (ret)
+		return ret;
+
+	pdev = platform_device_register_simple(RISCV_PMU_LEGACY_PDEV_NAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&pmu_legacy_driver);
+		return PTR_ERR(pdev);
+	}
+
+	return ret;
+}
+late_initcall(riscv_pmu_legacy_devinit);
+
+void riscv_pmu_legacy_init(bool done)
+{
+	if (done)
+		pmu_init_done = true;
+}
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index 564129839e19..f3bce79d8998 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -22,6 +22,7 @@
 #define RISCV_MAX_COUNTERS	64
 #define RISCV_OP_UNSUPP		(-EOPNOTSUPP)
 #define RISCV_PMU_PDEV_NAME	"riscv-pmu"
+#define RISCV_PMU_LEGACY_PDEV_NAME	"riscv-pmu-legacy"
 
 #define RISCV_PMU_STOP_FLAG_RESET 1
 
@@ -58,6 +59,7 @@ struct riscv_pmu {
 unsigned long riscv_pmu_ctr_read_csr(unsigned long csr);
 int riscv_pmu_event_set_period(struct perf_event *event, u64 *init_val);
 u64 riscv_pmu_event_update(struct perf_event *event);
+void riscv_pmu_legacy_init(bool init_done);
 struct riscv_pmu *riscv_pmu_alloc(void);
 
 #endif /* CONFIG_RISCV_PMU */
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 05/10] RISC-V: Add RISC-V SBI PMU extension definitions
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

This patch adds all the definitions defined by the SBI PMU extension.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/include/asm/sbi.h | 97 ++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 0d42693cb65e..7a14ca06ba8f 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -27,6 +27,7 @@ enum sbi_ext_id {
 	SBI_EXT_IPI = 0x735049,
 	SBI_EXT_RFENCE = 0x52464E43,
 	SBI_EXT_HSM = 0x48534D,
+	SBI_EXT_PMU = 0x504D55,
 };
 
 enum sbi_ext_base_fid {
@@ -70,6 +71,99 @@ enum sbi_hsm_hart_status {
 	SBI_HSM_HART_STATUS_STOP_PENDING,
 };
 
+
+enum sbi_ext_pmu_fid {
+	SBI_EXT_PMU_NUM_COUNTERS = 0,
+	SBI_EXT_PMU_COUNTER_GET_INFO,
+	SBI_EXT_PMU_COUNTER_CFG_MATCH,
+	SBI_EXT_PMU_COUNTER_START,
+	SBI_EXT_PMU_COUNTER_STOP,
+	SBI_EXT_PMU_COUNTER_FW_READ,
+};
+
+#define RISCV_PMU_RAW_EVENT_MASK GENMASK_ULL(55, 0)
+#define RISCV_PMU_RAW_EVENT_IDX 0x20000
+
+/** General pmu event codes specified in SBI PMU extension */
+enum sbi_pmu_hw_generic_events_t {
+	SBI_PMU_HW_NO_EVENT			= 0,
+	SBI_PMU_HW_CPU_CYCLES			= 1,
+	SBI_PMU_HW_INSTRUCTIONS			= 2,
+	SBI_PMU_HW_CACHE_REFERENCES		= 3,
+	SBI_PMU_HW_CACHE_MISSES			= 4,
+	SBI_PMU_HW_BRANCH_INSTRUCTIONS		= 5,
+	SBI_PMU_HW_BRANCH_MISSES		= 6,
+	SBI_PMU_HW_BUS_CYCLES			= 7,
+	SBI_PMU_HW_STALLED_CYCLES_FRONTEND	= 8,
+	SBI_PMU_HW_STALLED_CYCLES_BACKEND	= 9,
+	SBI_PMU_HW_REF_CPU_CYCLES		= 10,
+
+	SBI_PMU_HW_GENERAL_MAX,
+};
+
+/**
+ * Special "firmware" events provided by the firmware, even if the hardware
+ * does not support performance events. These events are encoded as a raw
+ * event type in Linux kernel perf framework.
+ */
+enum sbi_pmu_fw_generic_events_t {
+	SBI_PMU_FW_MISALIGNED_LOAD	= 0,
+	SBI_PMU_FW_MISALIGNED_STORE	= 1,
+	SBI_PMU_FW_ACCESS_LOAD		= 2,
+	SBI_PMU_FW_ACCESS_STORE		= 3,
+	SBI_PMU_FW_ILLEGAL_INSN		= 4,
+	SBI_PMU_FW_SET_TIMER		= 5,
+	SBI_PMU_FW_IPI_SENT		= 6,
+	SBI_PMU_FW_IPI_RECVD		= 7,
+	SBI_PMU_FW_FENCE_I_SENT		= 8,
+	SBI_PMU_FW_FENCE_I_RECVD	= 9,
+	SBI_PMU_FW_SFENCE_VMA_SENT	= 10,
+	SBI_PMU_FW_SFENCE_VMA_RCVD	= 11,
+	SBI_PMU_FW_SFENCE_VMA_ASID_SENT	= 12,
+	SBI_PMU_FW_SFENCE_VMA_ASID_RCVD	= 13,
+
+	SBI_PMU_FW_HFENCE_GVMA_SENT	= 14,
+	SBI_PMU_FW_HFENCE_GVMA_RCVD	= 15,
+	SBI_PMU_FW_HFENCE_GVMA_VMID_SENT = 16,
+	SBI_PMU_FW_HFENCE_GVMA_VMID_RCVD = 17,
+
+	SBI_PMU_FW_HFENCE_VVMA_SENT	= 18,
+	SBI_PMU_FW_HFENCE_VVMA_RCVD	= 19,
+	SBI_PMU_FW_HFENCE_VVMA_ASID_SENT = 20,
+	SBI_PMU_FW_HFENCE_VVMA_ASID_RCVD = 21,
+	SBI_PMU_FW_MAX,
+};
+
+/* SBI PMU event types */
+enum sbi_pmu_event_type {
+	SBI_PMU_EVENT_TYPE_HW = 0x0,
+	SBI_PMU_EVENT_TYPE_CACHE = 0x1,
+	SBI_PMU_EVENT_TYPE_RAW = 0x2,
+	SBI_PMU_EVENT_TYPE_FW = 0xf,
+};
+
+/* SBI PMU event types */
+enum sbi_pmu_ctr_type {
+	SBI_PMU_CTR_TYPE_HW = 0x0,
+	SBI_PMU_CTR_TYPE_FW,
+};
+
+/* Flags defined for config matching function */
+#define SBI_PMU_CFG_FLAG_SKIP_MATCH	(1 << 0)
+#define SBI_PMU_CFG_FLAG_CLEAR_VALUE	(1 << 1)
+#define SBI_PMU_CFG_FLAG_AUTO_START	(1 << 2)
+#define SBI_PMU_CFG_FLAG_SET_MINH	(1 << 3)
+#define SBI_PMU_CFG_FLAG_SET_SINH	(1 << 4)
+#define SBI_PMU_CFG_FLAG_SET_UINH	(1 << 5)
+#define SBI_PMU_CFG_FLAG_SET_VSINH	(1 << 6)
+#define SBI_PMU_CFG_FLAG_SET_VUINH	(1 << 7)
+
+/* Flags defined for counter start function */
+#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0)
+
+/* Flags defined for counter stop function */
+#define SBI_PMU_STOP_FLAG_RESET (1 << 0)
+
 #define SBI_SPEC_VERSION_DEFAULT	0x1
 #define SBI_SPEC_VERSION_MAJOR_SHIFT	24
 #define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
@@ -82,6 +176,9 @@ enum sbi_hsm_hart_status {
 #define SBI_ERR_INVALID_PARAM	-3
 #define SBI_ERR_DENIED		-4
 #define SBI_ERR_INVALID_ADDRESS	-5
+#define SBI_ERR_ALREADY_AVAILABLE -6
+#define SBI_ERR_ALREADY_STARTED -7
+#define SBI_ERR_ALREADY_STOPPED -8
 
 extern unsigned long sbi_spec_version;
 struct sbiret {
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 05/10] RISC-V: Add RISC-V SBI PMU extension definitions
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

This patch adds all the definitions defined by the SBI PMU extension.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/include/asm/sbi.h | 97 ++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 0d42693cb65e..7a14ca06ba8f 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -27,6 +27,7 @@ enum sbi_ext_id {
 	SBI_EXT_IPI = 0x735049,
 	SBI_EXT_RFENCE = 0x52464E43,
 	SBI_EXT_HSM = 0x48534D,
+	SBI_EXT_PMU = 0x504D55,
 };
 
 enum sbi_ext_base_fid {
@@ -70,6 +71,99 @@ enum sbi_hsm_hart_status {
 	SBI_HSM_HART_STATUS_STOP_PENDING,
 };
 
+
+enum sbi_ext_pmu_fid {
+	SBI_EXT_PMU_NUM_COUNTERS = 0,
+	SBI_EXT_PMU_COUNTER_GET_INFO,
+	SBI_EXT_PMU_COUNTER_CFG_MATCH,
+	SBI_EXT_PMU_COUNTER_START,
+	SBI_EXT_PMU_COUNTER_STOP,
+	SBI_EXT_PMU_COUNTER_FW_READ,
+};
+
+#define RISCV_PMU_RAW_EVENT_MASK GENMASK_ULL(55, 0)
+#define RISCV_PMU_RAW_EVENT_IDX 0x20000
+
+/** General pmu event codes specified in SBI PMU extension */
+enum sbi_pmu_hw_generic_events_t {
+	SBI_PMU_HW_NO_EVENT			= 0,
+	SBI_PMU_HW_CPU_CYCLES			= 1,
+	SBI_PMU_HW_INSTRUCTIONS			= 2,
+	SBI_PMU_HW_CACHE_REFERENCES		= 3,
+	SBI_PMU_HW_CACHE_MISSES			= 4,
+	SBI_PMU_HW_BRANCH_INSTRUCTIONS		= 5,
+	SBI_PMU_HW_BRANCH_MISSES		= 6,
+	SBI_PMU_HW_BUS_CYCLES			= 7,
+	SBI_PMU_HW_STALLED_CYCLES_FRONTEND	= 8,
+	SBI_PMU_HW_STALLED_CYCLES_BACKEND	= 9,
+	SBI_PMU_HW_REF_CPU_CYCLES		= 10,
+
+	SBI_PMU_HW_GENERAL_MAX,
+};
+
+/**
+ * Special "firmware" events provided by the firmware, even if the hardware
+ * does not support performance events. These events are encoded as a raw
+ * event type in Linux kernel perf framework.
+ */
+enum sbi_pmu_fw_generic_events_t {
+	SBI_PMU_FW_MISALIGNED_LOAD	= 0,
+	SBI_PMU_FW_MISALIGNED_STORE	= 1,
+	SBI_PMU_FW_ACCESS_LOAD		= 2,
+	SBI_PMU_FW_ACCESS_STORE		= 3,
+	SBI_PMU_FW_ILLEGAL_INSN		= 4,
+	SBI_PMU_FW_SET_TIMER		= 5,
+	SBI_PMU_FW_IPI_SENT		= 6,
+	SBI_PMU_FW_IPI_RECVD		= 7,
+	SBI_PMU_FW_FENCE_I_SENT		= 8,
+	SBI_PMU_FW_FENCE_I_RECVD	= 9,
+	SBI_PMU_FW_SFENCE_VMA_SENT	= 10,
+	SBI_PMU_FW_SFENCE_VMA_RCVD	= 11,
+	SBI_PMU_FW_SFENCE_VMA_ASID_SENT	= 12,
+	SBI_PMU_FW_SFENCE_VMA_ASID_RCVD	= 13,
+
+	SBI_PMU_FW_HFENCE_GVMA_SENT	= 14,
+	SBI_PMU_FW_HFENCE_GVMA_RCVD	= 15,
+	SBI_PMU_FW_HFENCE_GVMA_VMID_SENT = 16,
+	SBI_PMU_FW_HFENCE_GVMA_VMID_RCVD = 17,
+
+	SBI_PMU_FW_HFENCE_VVMA_SENT	= 18,
+	SBI_PMU_FW_HFENCE_VVMA_RCVD	= 19,
+	SBI_PMU_FW_HFENCE_VVMA_ASID_SENT = 20,
+	SBI_PMU_FW_HFENCE_VVMA_ASID_RCVD = 21,
+	SBI_PMU_FW_MAX,
+};
+
+/* SBI PMU event types */
+enum sbi_pmu_event_type {
+	SBI_PMU_EVENT_TYPE_HW = 0x0,
+	SBI_PMU_EVENT_TYPE_CACHE = 0x1,
+	SBI_PMU_EVENT_TYPE_RAW = 0x2,
+	SBI_PMU_EVENT_TYPE_FW = 0xf,
+};
+
+/* SBI PMU event types */
+enum sbi_pmu_ctr_type {
+	SBI_PMU_CTR_TYPE_HW = 0x0,
+	SBI_PMU_CTR_TYPE_FW,
+};
+
+/* Flags defined for config matching function */
+#define SBI_PMU_CFG_FLAG_SKIP_MATCH	(1 << 0)
+#define SBI_PMU_CFG_FLAG_CLEAR_VALUE	(1 << 1)
+#define SBI_PMU_CFG_FLAG_AUTO_START	(1 << 2)
+#define SBI_PMU_CFG_FLAG_SET_MINH	(1 << 3)
+#define SBI_PMU_CFG_FLAG_SET_SINH	(1 << 4)
+#define SBI_PMU_CFG_FLAG_SET_UINH	(1 << 5)
+#define SBI_PMU_CFG_FLAG_SET_VSINH	(1 << 6)
+#define SBI_PMU_CFG_FLAG_SET_VUINH	(1 << 7)
+
+/* Flags defined for counter start function */
+#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0)
+
+/* Flags defined for counter stop function */
+#define SBI_PMU_STOP_FLAG_RESET (1 << 0)
+
 #define SBI_SPEC_VERSION_DEFAULT	0x1
 #define SBI_SPEC_VERSION_MAJOR_SHIFT	24
 #define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
@@ -82,6 +176,9 @@ enum sbi_hsm_hart_status {
 #define SBI_ERR_INVALID_PARAM	-3
 #define SBI_ERR_DENIED		-4
 #define SBI_ERR_INVALID_ADDRESS	-5
+#define SBI_ERR_ALREADY_AVAILABLE -6
+#define SBI_ERR_ALREADY_STARTED -7
+#define SBI_ERR_ALREADY_STOPPED -8
 
 extern unsigned long sbi_spec_version;
 struct sbiret {
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 06/10] dt-binding: pmu: Add RISC-V PMU DT bindings
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

This patch adds the DT bindings for RISC-V PMU driver. It also defines
the interrupt related properties to allow counter overflow interrupt.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 .../devicetree/bindings/perf/riscv,pmu.yaml   | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml

diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
new file mode 100644
index 000000000000..497caad63f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pmu/riscv,pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V PMU
+
+maintainers:
+  - Atish Patra <atish.patra@wdc.com>
+
+description:
+  The "Sscofpmf" extension allows the RISC-V PMU counters to overflow and
+  generate a local interrupt so that event sampling can be done from user-space.
+  The above said ISA extension is an optional extension to maintain backward
+  compatibility and will be included in privilege specification v1.12 . That's
+  why the interrupt property is marked as optional. The platforms with sscofpmf
+  extension should add this property to enable event sampling.
+  The device tree node with the compatible string is mandatory for any platform
+  that wants to use pmu counter start/stop methods using SBI PMU extension.
+
+properties:
+  compatible:
+    enum:
+      - riscv,pmu
+
+    description:
+      Should be "riscv,pmu".
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+additionalProperties: false
+
+required:
+  - None
+optional:
+  - compatible
+  - interrupts-extended
+
+examples:
+  - |
+    pmu {
+      compatible = "riscv,pmu";
+      interrupts-extended = <&cpu0intc 13>,
+                            <&cpu1intc 13>,
+                            <&cpu2intc 13>,
+                            <&cpu3intc 13>;
+    };
+...
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 06/10] dt-binding: pmu: Add RISC-V PMU DT bindings
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

This patch adds the DT bindings for RISC-V PMU driver. It also defines
the interrupt related properties to allow counter overflow interrupt.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 .../devicetree/bindings/perf/riscv,pmu.yaml   | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml

diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
new file mode 100644
index 000000000000..497caad63f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pmu/riscv,pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V PMU
+
+maintainers:
+  - Atish Patra <atish.patra@wdc.com>
+
+description:
+  The "Sscofpmf" extension allows the RISC-V PMU counters to overflow and
+  generate a local interrupt so that event sampling can be done from user-space.
+  The above said ISA extension is an optional extension to maintain backward
+  compatibility and will be included in privilege specification v1.12 . That's
+  why the interrupt property is marked as optional. The platforms with sscofpmf
+  extension should add this property to enable event sampling.
+  The device tree node with the compatible string is mandatory for any platform
+  that wants to use pmu counter start/stop methods using SBI PMU extension.
+
+properties:
+  compatible:
+    enum:
+      - riscv,pmu
+
+    description:
+      Should be "riscv,pmu".
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+additionalProperties: false
+
+required:
+  - None
+optional:
+  - compatible
+  - interrupts-extended
+
+examples:
+  - |
+    pmu {
+      compatible = "riscv,pmu";
+      interrupts-extended = <&cpu0intc 13>,
+                            <&cpu1intc 13>,
+                            <&cpu2intc 13>,
+                            <&cpu3intc 13>;
+    };
+...
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 07/10] RISC-V: Add perf platform driver based on SBI PMU extension
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

RISC-V SBI specification added a PMU extension that allows to configure
/start/stop any pmu counter. The RISC-V perf can use most of the generic
perf features except interrupt overflow and event filtering based on
privilege mode which will be added in future.

It also allows to monitor a handful of firmware counters that can provide
insights into firmware activity during a performance analysis.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 drivers/perf/Kconfig         |   8 +
 drivers/perf/Makefile        |   1 +
 drivers/perf/riscv_pmu.c     |   2 +
 drivers/perf/riscv_pmu_sbi.c | 552 +++++++++++++++++++++++++++++++++++
 4 files changed, 563 insertions(+)
 create mode 100644 drivers/perf/riscv_pmu_sbi.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 1546a487d970..4e030ba6e7f5 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -73,6 +73,14 @@ config RISCV_PMU_LEGACY
 	  implementation on RISC-V based systems. This only allows counting
 	  of cycle/instruction counter and will be removed in future.
 
+config RISCV_PMU_SBI
+	depends on RISCV_PMU && RISCV_SBI
+	bool "RISC-V PMU based on SBI PMU extension"
+	default y
+	help
+	  Say y if you want to use the CPU performance monitor
+	  using SBI PMU extension on RISC-V based systems.
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index e8aa666a9d28..7bcac4b5a983 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
 obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
 ifeq ($(CONFIG_RISCV_PMU), y)
 obj-$(CONFIG_RISCV_PMU_LEGACY) += riscv_pmu_legacy.o
+obj-$(CONFIG_RISCV_PMU_SBI) += riscv_pmu_sbi.o
 endif
 obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
index 9c4ebcabca6e..0c853e23f679 100644
--- a/drivers/perf/riscv_pmu.c
+++ b/drivers/perf/riscv_pmu.c
@@ -15,6 +15,8 @@
 #include <linux/printk.h>
 #include <linux/smp.h>
 
+#include <asm/sbi.h>
+
 static unsigned long csr_read_num(int csr_num)
 {
 #define switchcase_csr_read(__csr_num, __val)		{\
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
new file mode 100644
index 000000000000..addbdd932150
--- /dev/null
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V performance counter support.
+ *
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ * This code is based on ARM perf event code which is in turn based on
+ * sparc64 and x86 code.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/perf/riscv_pmu.h>
+#include <linux/platform_device.h>
+
+#include <asm/sbi.h>
+
+union sbi_pmu_ctr_info {
+	unsigned long value;
+	struct {
+		unsigned long csr:12;
+		unsigned long width:6;
+#if __riscv_xlen == 32
+		unsigned long reserved:13;
+#else
+		unsigned long reserved:45;
+#endif
+		unsigned long type:1;
+	};
+};
+
+/**
+ * RISC-V doesn't have hetergenous harts yet. This need to be part of
+ * per_cpu in case of harts with different pmu counters
+ */
+static union sbi_pmu_ctr_info *pmu_ctr_list;
+
+struct pmu_event_data {
+	union {
+		union {
+			struct hw_gen_event {
+				uint32_t event_code:16;
+				uint32_t event_type:4;
+				uint32_t reserved:12;
+			} hw_gen_event;
+			struct hw_cache_event {
+				uint32_t result_id:1;
+				uint32_t op_id:2;
+				uint32_t cache_id:13;
+				uint32_t event_type:4;
+				uint32_t reserved:12;
+			} hw_cache_event;
+		};
+		uint32_t event_idx;
+	};
+};
+
+static const struct pmu_event_data pmu_hw_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= {.hw_gen_event = {
+							SBI_PMU_HW_CPU_CYCLES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_INSTRUCTIONS]		= {.hw_gen_event = {
+							SBI_PMU_HW_INSTRUCTIONS,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= {.hw_gen_event = {
+							SBI_PMU_HW_CACHE_REFERENCES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_CACHE_MISSES]		= {.hw_gen_event = {
+							SBI_PMU_HW_CACHE_MISSES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= {.hw_gen_event = {
+							SBI_PMU_HW_BRANCH_INSTRUCTIONS,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_BRANCH_MISSES]		= {.hw_gen_event = {
+							SBI_PMU_HW_BRANCH_MISSES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_BUS_CYCLES]		= {.hw_gen_event = {
+							SBI_PMU_HW_BUS_CYCLES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= {.hw_gen_event = {
+							SBI_PMU_HW_STALLED_CYCLES_FRONTEND,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= {.hw_gen_event = {
+							SBI_PMU_HW_STALLED_CYCLES_BACKEND,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_REF_CPU_CYCLES]		= {.hw_gen_event = {
+							SBI_PMU_HW_REF_CPU_CYCLES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+};
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+static const struct pmu_event_data pmu_cache_event_map[PERF_COUNT_HW_CACHE_MAX]
+[PERF_COUNT_HW_CACHE_OP_MAX]
+[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event =	{C(RESULT_ACCESS),
+					C(OP_READ), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), C(OP_READ),
+					C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+};
+
+static int pmu_sbi_ctr_get_width(int idx)
+{
+	return pmu_ctr_list[idx].width;
+}
+
+static int pmu_sbi_ctr_get_idx(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	struct sbiret ret;
+	int idx;
+	uint64_t cbase = 0;
+	uint64_t cmask = GENMASK_ULL(rvpmu->num_counters - 1, 0);
+	unsigned long cflags = 0;
+
+	/* retrieve the available counter index */
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
+			cflags, hwc->event_base, hwc->config, 0);
+	if (ret.error) {
+		pr_debug("Not able to find a counter for event %lx config %llx\n",
+			hwc->event_base, hwc->config);
+		return sbi_err_map_linux_errno(ret.error);
+	}
+
+	idx = ret.value;
+	if (idx >= rvpmu->num_counters || !pmu_ctr_list[idx].value)
+		return -ENOENT;
+
+	/* Additional sanity check for the counter id */
+	if (!test_and_set_bit(idx, cpuc->used_event_ctrs))
+		return idx;
+	else
+		return -ENOENT;
+}
+
+static void pmu_sbi_ctr_clear_idx(struct perf_event *event)
+{
+
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	int idx = hwc->idx;
+
+	clear_bit(idx, cpuc->used_event_ctrs);
+}
+
+static int pmu_event_find_cache(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result, ret;
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ret = pmu_cache_event_map[cache_type][cache_op][cache_result].event_idx;
+
+	return ret;
+}
+
+static bool pmu_sbi_is_fw_event(struct perf_event *event)
+{
+	u32 type = event->attr.type;
+	u64 config = event->attr.config;
+
+	if ((type == PERF_TYPE_RAW) && ((config >> 63) == 1))
+		return true;
+	else
+		return false;
+}
+
+static int pmu_sbi_event_map(struct perf_event *event, u64 *econfig)
+{
+	u32 type = event->attr.type;
+	u64 config = event->attr.config;
+	int bSoftware;
+	u64 raw_config_val;
+	int ret;
+
+	switch (type) {
+	case PERF_TYPE_HARDWARE:
+		if (config >= PERF_COUNT_HW_MAX)
+			return -EINVAL;
+		ret = pmu_hw_event_map[event->attr.config].event_idx;
+		break;
+	case PERF_TYPE_HW_CACHE:
+		ret = pmu_event_find_cache(config);
+		break;
+	case PERF_TYPE_RAW:
+		/*
+		 * As per SBI specification, the upper 16 bits must be unused for
+		 * a raw event. Use the MSB (63b) to distinguish between hardware
+		 * raw event and firmware events.
+		 */
+		bSoftware = config >> 63;
+		raw_config_val = config & RISCV_PMU_RAW_EVENT_MASK;
+		if (bSoftware) {
+			if (raw_config_val < SBI_PMU_FW_MAX)
+				ret = (raw_config_val & 0xFFFF) |
+				      (SBI_PMU_EVENT_TYPE_FW << 16);
+			else
+				return -EINVAL;
+		} else {
+			ret = RISCV_PMU_RAW_EVENT_IDX;
+			*econfig = raw_config_val;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static u64 pmu_sbi_ctr_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	struct sbiret ret;
+	union sbi_pmu_ctr_info info;
+	u64 val = 0;
+
+	if (pmu_sbi_is_fw_event(event)) {
+		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
+				hwc->idx, 0, 0, 0, 0, 0);
+		if (!ret.error)
+			val = ret.value;
+	} else {
+		info = pmu_ctr_list[idx];
+		val = riscv_pmu_ctr_read_csr(info.csr);
+		if (IS_ENABLED(CONFIG_32BIT))
+			val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
+	}
+
+	return val;
+}
+
+static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
+{
+	struct sbiret ret;
+	struct hw_perf_event *hwc = &event->hw;
+
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
+			1, 1, ival, ival >> 32, 0);
+	if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
+		pr_err("Starting counter idx %d failed with error %d\n",
+			hwc->idx, sbi_err_map_linux_errno(ret.error));
+}
+
+static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
+{
+	struct sbiret ret;
+	struct hw_perf_event *hwc = &event->hw;
+
+	//disable IRQ
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0);
+	if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
+		flag != SBI_PMU_STOP_FLAG_RESET)
+		pr_err("Stopping counter idx %d failed with error %d\n",
+			hwc->idx, sbi_err_map_linux_errno(ret.error));
+}
+
+static int pmu_sbi_find_num_ctrs(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_NUM_COUNTERS, 0, 0, 0, 0, 0, 0);
+	if (!ret.error)
+		return ret.value;
+	else
+		return sbi_err_map_linux_errno(ret.error);
+}
+
+static int pmu_sbi_get_ctrinfo(int nctr)
+{
+	struct sbiret ret;
+	int i, num_hw_ctr = 0, num_fw_ctr = 0;
+	union sbi_pmu_ctr_info cinfo;
+
+	pmu_ctr_list = kcalloc(nctr, sizeof(*pmu_ctr_list), GFP_KERNEL);
+	if (!pmu_ctr_list)
+		return -ENOMEM;
+
+	for (i = 0; i <= nctr; i++) {
+		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_GET_INFO, i, 0, 0, 0, 0, 0);
+		if (ret.error)
+			/* The logical counter ids are not expected to be contiguous */
+			continue;
+		cinfo.value = ret.value;
+		if (cinfo.type == SBI_PMU_CTR_TYPE_FW)
+			num_fw_ctr++;
+		else
+			num_hw_ctr++;
+		pmu_ctr_list[i].value = cinfo.value;
+	}
+
+	pr_info("There are %d firmware & %d hardware counters available\n",
+		num_fw_ctr, num_hw_ctr);
+
+	return 0;
+}
+
+static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+
+	/* Enable the access for TIME csr only from the user mode now */
+	csr_write(CSR_SCOUNTEREN, 0x2);
+
+	/* Stop all the counters so that they can be enabled from perf */
+	sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
+		  0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
+
+	return 0;
+}
+
+static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	/* Disable all counters access for user mode now */
+	csr_write(CSR_SCOUNTEREN, 0x0);
+
+	return 0;
+}
+
+static int pmu_sbi_device_probe(struct platform_device *pdev)
+{
+	struct riscv_pmu *pmu = NULL;
+	int num_counters;
+	int ret;
+
+	pr_info("SBI PMU extension is available\n");
+	/* Notify legacy implementation that SBI pmu is available*/
+	riscv_pmu_legacy_init(true);
+	pmu = riscv_pmu_alloc();
+	if (!pmu)
+		return -ENOMEM;
+
+	num_counters = pmu_sbi_find_num_ctrs();
+	if (num_counters < 0) {
+		pr_err("SBI PMU extension doesn't provide any counters\n");
+		return -ENODEV;
+	}
+
+	/* cache all the information about counters now */
+	if (pmu_sbi_get_ctrinfo(num_counters))
+		return -ENODEV;
+
+	pmu->num_counters = num_counters;
+	pmu->ctr_start = pmu_sbi_ctr_start;
+	pmu->ctr_stop = pmu_sbi_ctr_stop;
+	pmu->event_map = pmu_sbi_event_map;
+	pmu->ctr_get_idx = pmu_sbi_ctr_get_idx;
+	pmu->ctr_get_width = pmu_sbi_ctr_get_width;
+	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
+	pmu->ctr_read = pmu_sbi_ctr_read;
+
+	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
+	if (ret)
+		return ret;
+
+	ret = perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW);
+	if (ret) {
+		cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver pmu_sbi_driver = {
+	.probe		= pmu_sbi_device_probe,
+	.driver		= {
+		.name	= RISCV_PMU_PDEV_NAME,
+	},
+};
+
+static int __init pmu_sbi_devinit(void)
+{
+	int ret;
+	struct platform_device *pdev;
+
+	if (((sbi_major_version() == 0) && (sbi_minor_version() < 3)) ||
+		sbi_probe_extension(SBI_EXT_PMU) <= 0) {
+		return 0;
+	}
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
+				      "perf/riscv/pmu:starting",
+				      pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);
+	if (ret) {
+		pr_err("CPU hotplug notifier for RISC-V PMU could not be registered: %d\n",
+		       ret);
+		return ret;
+	}
+
+	ret = platform_driver_register(&pmu_sbi_driver);
+	if (ret)
+		return ret;
+
+	pdev = platform_device_register_simple(RISCV_PMU_PDEV_NAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&pmu_sbi_driver);
+		return PTR_ERR(pdev);
+	}
+
+	return ret;
+}
+device_initcall(pmu_sbi_devinit)
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 07/10] RISC-V: Add perf platform driver based on SBI PMU extension
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

RISC-V SBI specification added a PMU extension that allows to configure
/start/stop any pmu counter. The RISC-V perf can use most of the generic
perf features except interrupt overflow and event filtering based on
privilege mode which will be added in future.

It also allows to monitor a handful of firmware counters that can provide
insights into firmware activity during a performance analysis.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 drivers/perf/Kconfig         |   8 +
 drivers/perf/Makefile        |   1 +
 drivers/perf/riscv_pmu.c     |   2 +
 drivers/perf/riscv_pmu_sbi.c | 552 +++++++++++++++++++++++++++++++++++
 4 files changed, 563 insertions(+)
 create mode 100644 drivers/perf/riscv_pmu_sbi.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 1546a487d970..4e030ba6e7f5 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -73,6 +73,14 @@ config RISCV_PMU_LEGACY
 	  implementation on RISC-V based systems. This only allows counting
 	  of cycle/instruction counter and will be removed in future.
 
+config RISCV_PMU_SBI
+	depends on RISCV_PMU && RISCV_SBI
+	bool "RISC-V PMU based on SBI PMU extension"
+	default y
+	help
+	  Say y if you want to use the CPU performance monitor
+	  using SBI PMU extension on RISC-V based systems.
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index e8aa666a9d28..7bcac4b5a983 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
 obj-$(CONFIG_RISCV_PMU) += riscv_pmu.o
 ifeq ($(CONFIG_RISCV_PMU), y)
 obj-$(CONFIG_RISCV_PMU_LEGACY) += riscv_pmu_legacy.o
+obj-$(CONFIG_RISCV_PMU_SBI) += riscv_pmu_sbi.o
 endif
 obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
index 9c4ebcabca6e..0c853e23f679 100644
--- a/drivers/perf/riscv_pmu.c
+++ b/drivers/perf/riscv_pmu.c
@@ -15,6 +15,8 @@
 #include <linux/printk.h>
 #include <linux/smp.h>
 
+#include <asm/sbi.h>
+
 static unsigned long csr_read_num(int csr_num)
 {
 #define switchcase_csr_read(__csr_num, __val)		{\
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
new file mode 100644
index 000000000000..addbdd932150
--- /dev/null
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V performance counter support.
+ *
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ *
+ * This code is based on ARM perf event code which is in turn based on
+ * sparc64 and x86 code.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/perf/riscv_pmu.h>
+#include <linux/platform_device.h>
+
+#include <asm/sbi.h>
+
+union sbi_pmu_ctr_info {
+	unsigned long value;
+	struct {
+		unsigned long csr:12;
+		unsigned long width:6;
+#if __riscv_xlen == 32
+		unsigned long reserved:13;
+#else
+		unsigned long reserved:45;
+#endif
+		unsigned long type:1;
+	};
+};
+
+/**
+ * RISC-V doesn't have hetergenous harts yet. This need to be part of
+ * per_cpu in case of harts with different pmu counters
+ */
+static union sbi_pmu_ctr_info *pmu_ctr_list;
+
+struct pmu_event_data {
+	union {
+		union {
+			struct hw_gen_event {
+				uint32_t event_code:16;
+				uint32_t event_type:4;
+				uint32_t reserved:12;
+			} hw_gen_event;
+			struct hw_cache_event {
+				uint32_t result_id:1;
+				uint32_t op_id:2;
+				uint32_t cache_id:13;
+				uint32_t event_type:4;
+				uint32_t reserved:12;
+			} hw_cache_event;
+		};
+		uint32_t event_idx;
+	};
+};
+
+static const struct pmu_event_data pmu_hw_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= {.hw_gen_event = {
+							SBI_PMU_HW_CPU_CYCLES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_INSTRUCTIONS]		= {.hw_gen_event = {
+							SBI_PMU_HW_INSTRUCTIONS,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= {.hw_gen_event = {
+							SBI_PMU_HW_CACHE_REFERENCES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_CACHE_MISSES]		= {.hw_gen_event = {
+							SBI_PMU_HW_CACHE_MISSES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= {.hw_gen_event = {
+							SBI_PMU_HW_BRANCH_INSTRUCTIONS,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_BRANCH_MISSES]		= {.hw_gen_event = {
+							SBI_PMU_HW_BRANCH_MISSES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_BUS_CYCLES]		= {.hw_gen_event = {
+							SBI_PMU_HW_BUS_CYCLES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= {.hw_gen_event = {
+							SBI_PMU_HW_STALLED_CYCLES_FRONTEND,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= {.hw_gen_event = {
+							SBI_PMU_HW_STALLED_CYCLES_BACKEND,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+	[PERF_COUNT_HW_REF_CPU_CYCLES]		= {.hw_gen_event = {
+							SBI_PMU_HW_REF_CPU_CYCLES,
+							SBI_PMU_EVENT_TYPE_HW, 0}},
+};
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+static const struct pmu_event_data pmu_cache_event_map[PERF_COUNT_HW_CACHE_MAX]
+[PERF_COUNT_HW_CACHE_OP_MAX]
+[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event =	{C(RESULT_ACCESS),
+					C(OP_READ), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), C(OP_READ),
+					C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_READ), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_READ), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_WRITE), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_WRITE), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS),
+					C(OP_PREFETCH), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+			[C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS),
+					C(OP_PREFETCH), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}},
+		},
+	},
+};
+
+static int pmu_sbi_ctr_get_width(int idx)
+{
+	return pmu_ctr_list[idx].width;
+}
+
+static int pmu_sbi_ctr_get_idx(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	struct sbiret ret;
+	int idx;
+	uint64_t cbase = 0;
+	uint64_t cmask = GENMASK_ULL(rvpmu->num_counters - 1, 0);
+	unsigned long cflags = 0;
+
+	/* retrieve the available counter index */
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
+			cflags, hwc->event_base, hwc->config, 0);
+	if (ret.error) {
+		pr_debug("Not able to find a counter for event %lx config %llx\n",
+			hwc->event_base, hwc->config);
+		return sbi_err_map_linux_errno(ret.error);
+	}
+
+	idx = ret.value;
+	if (idx >= rvpmu->num_counters || !pmu_ctr_list[idx].value)
+		return -ENOENT;
+
+	/* Additional sanity check for the counter id */
+	if (!test_and_set_bit(idx, cpuc->used_event_ctrs))
+		return idx;
+	else
+		return -ENOENT;
+}
+
+static void pmu_sbi_ctr_clear_idx(struct perf_event *event)
+{
+
+	struct hw_perf_event *hwc = &event->hw;
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
+	int idx = hwc->idx;
+
+	clear_bit(idx, cpuc->used_event_ctrs);
+}
+
+static int pmu_event_find_cache(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result, ret;
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ret = pmu_cache_event_map[cache_type][cache_op][cache_result].event_idx;
+
+	return ret;
+}
+
+static bool pmu_sbi_is_fw_event(struct perf_event *event)
+{
+	u32 type = event->attr.type;
+	u64 config = event->attr.config;
+
+	if ((type == PERF_TYPE_RAW) && ((config >> 63) == 1))
+		return true;
+	else
+		return false;
+}
+
+static int pmu_sbi_event_map(struct perf_event *event, u64 *econfig)
+{
+	u32 type = event->attr.type;
+	u64 config = event->attr.config;
+	int bSoftware;
+	u64 raw_config_val;
+	int ret;
+
+	switch (type) {
+	case PERF_TYPE_HARDWARE:
+		if (config >= PERF_COUNT_HW_MAX)
+			return -EINVAL;
+		ret = pmu_hw_event_map[event->attr.config].event_idx;
+		break;
+	case PERF_TYPE_HW_CACHE:
+		ret = pmu_event_find_cache(config);
+		break;
+	case PERF_TYPE_RAW:
+		/*
+		 * As per SBI specification, the upper 16 bits must be unused for
+		 * a raw event. Use the MSB (63b) to distinguish between hardware
+		 * raw event and firmware events.
+		 */
+		bSoftware = config >> 63;
+		raw_config_val = config & RISCV_PMU_RAW_EVENT_MASK;
+		if (bSoftware) {
+			if (raw_config_val < SBI_PMU_FW_MAX)
+				ret = (raw_config_val & 0xFFFF) |
+				      (SBI_PMU_EVENT_TYPE_FW << 16);
+			else
+				return -EINVAL;
+		} else {
+			ret = RISCV_PMU_RAW_EVENT_IDX;
+			*econfig = raw_config_val;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static u64 pmu_sbi_ctr_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	struct sbiret ret;
+	union sbi_pmu_ctr_info info;
+	u64 val = 0;
+
+	if (pmu_sbi_is_fw_event(event)) {
+		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
+				hwc->idx, 0, 0, 0, 0, 0);
+		if (!ret.error)
+			val = ret.value;
+	} else {
+		info = pmu_ctr_list[idx];
+		val = riscv_pmu_ctr_read_csr(info.csr);
+		if (IS_ENABLED(CONFIG_32BIT))
+			val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
+	}
+
+	return val;
+}
+
+static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
+{
+	struct sbiret ret;
+	struct hw_perf_event *hwc = &event->hw;
+
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
+			1, 1, ival, ival >> 32, 0);
+	if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
+		pr_err("Starting counter idx %d failed with error %d\n",
+			hwc->idx, sbi_err_map_linux_errno(ret.error));
+}
+
+static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
+{
+	struct sbiret ret;
+	struct hw_perf_event *hwc = &event->hw;
+
+	//disable IRQ
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0);
+	if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
+		flag != SBI_PMU_STOP_FLAG_RESET)
+		pr_err("Stopping counter idx %d failed with error %d\n",
+			hwc->idx, sbi_err_map_linux_errno(ret.error));
+}
+
+static int pmu_sbi_find_num_ctrs(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_NUM_COUNTERS, 0, 0, 0, 0, 0, 0);
+	if (!ret.error)
+		return ret.value;
+	else
+		return sbi_err_map_linux_errno(ret.error);
+}
+
+static int pmu_sbi_get_ctrinfo(int nctr)
+{
+	struct sbiret ret;
+	int i, num_hw_ctr = 0, num_fw_ctr = 0;
+	union sbi_pmu_ctr_info cinfo;
+
+	pmu_ctr_list = kcalloc(nctr, sizeof(*pmu_ctr_list), GFP_KERNEL);
+	if (!pmu_ctr_list)
+		return -ENOMEM;
+
+	for (i = 0; i <= nctr; i++) {
+		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_GET_INFO, i, 0, 0, 0, 0, 0);
+		if (ret.error)
+			/* The logical counter ids are not expected to be contiguous */
+			continue;
+		cinfo.value = ret.value;
+		if (cinfo.type == SBI_PMU_CTR_TYPE_FW)
+			num_fw_ctr++;
+		else
+			num_hw_ctr++;
+		pmu_ctr_list[i].value = cinfo.value;
+	}
+
+	pr_info("There are %d firmware & %d hardware counters available\n",
+		num_fw_ctr, num_hw_ctr);
+
+	return 0;
+}
+
+static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+
+	/* Enable the access for TIME csr only from the user mode now */
+	csr_write(CSR_SCOUNTEREN, 0x2);
+
+	/* Stop all the counters so that they can be enabled from perf */
+	sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
+		  0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
+
+	return 0;
+}
+
+static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	/* Disable all counters access for user mode now */
+	csr_write(CSR_SCOUNTEREN, 0x0);
+
+	return 0;
+}
+
+static int pmu_sbi_device_probe(struct platform_device *pdev)
+{
+	struct riscv_pmu *pmu = NULL;
+	int num_counters;
+	int ret;
+
+	pr_info("SBI PMU extension is available\n");
+	/* Notify legacy implementation that SBI pmu is available*/
+	riscv_pmu_legacy_init(true);
+	pmu = riscv_pmu_alloc();
+	if (!pmu)
+		return -ENOMEM;
+
+	num_counters = pmu_sbi_find_num_ctrs();
+	if (num_counters < 0) {
+		pr_err("SBI PMU extension doesn't provide any counters\n");
+		return -ENODEV;
+	}
+
+	/* cache all the information about counters now */
+	if (pmu_sbi_get_ctrinfo(num_counters))
+		return -ENODEV;
+
+	pmu->num_counters = num_counters;
+	pmu->ctr_start = pmu_sbi_ctr_start;
+	pmu->ctr_stop = pmu_sbi_ctr_stop;
+	pmu->event_map = pmu_sbi_event_map;
+	pmu->ctr_get_idx = pmu_sbi_ctr_get_idx;
+	pmu->ctr_get_width = pmu_sbi_ctr_get_width;
+	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
+	pmu->ctr_read = pmu_sbi_ctr_read;
+
+	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
+	if (ret)
+		return ret;
+
+	ret = perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW);
+	if (ret) {
+		cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver pmu_sbi_driver = {
+	.probe		= pmu_sbi_device_probe,
+	.driver		= {
+		.name	= RISCV_PMU_PDEV_NAME,
+	},
+};
+
+static int __init pmu_sbi_devinit(void)
+{
+	int ret;
+	struct platform_device *pdev;
+
+	if (((sbi_major_version() == 0) && (sbi_minor_version() < 3)) ||
+		sbi_probe_extension(SBI_EXT_PMU) <= 0) {
+		return 0;
+	}
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
+				      "perf/riscv/pmu:starting",
+				      pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);
+	if (ret) {
+		pr_err("CPU hotplug notifier for RISC-V PMU could not be registered: %d\n",
+		       ret);
+		return ret;
+	}
+
+	ret = platform_driver_register(&pmu_sbi_driver);
+	if (ret)
+		return ret;
+
+	pdev = platform_device_register_simple(RISCV_PMU_PDEV_NAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		platform_driver_unregister(&pmu_sbi_driver);
+		return PTR_ERR(pdev);
+	}
+
+	return ret;
+}
+device_initcall(pmu_sbi_devinit)
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 08/10] RISC-V: Add interrupt support for perf
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The Sscof extension allows counter overflow and filtering for programmable
counters. Enable the perf driver to handle the overflow interrupt.
Even though the perf overflow interrupt is a local one, it is parsed from
DT for simplification. Thus, the DT node with interrupt-extended property
is mandatory for any platform that wants event sampling.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/include/asm/csr.h   |   8 +-
 drivers/perf/riscv_pmu_sbi.c   | 209 ++++++++++++++++++++++++++++++---
 include/linux/perf/riscv_pmu.h |   4 +-
 3 files changed, 204 insertions(+), 17 deletions(-)

diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index e4d369830af4..8b2ac554ce9c 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -63,6 +63,7 @@
 #define IRQ_M_TIMER		7
 #define IRQ_S_EXT		9
 #define IRQ_M_EXT		11
+#define IRQ_PMU_OVF		13
 
 /* Exception causes */
 #define EXC_INST_MISALIGNED	0
@@ -151,6 +152,8 @@
 #define CSR_HPMCOUNTER30H	0xc9e
 #define CSR_HPMCOUNTER31H	0xc9f
 
+#define CSR_SSCOUNTOVF		0xd33
+
 #define CSR_SSTATUS		0x100
 #define CSR_SIE			0x104
 #define CSR_STVEC		0x105
@@ -212,7 +215,10 @@
 # define RV_IRQ_SOFT		IRQ_S_SOFT
 # define RV_IRQ_TIMER	IRQ_S_TIMER
 # define RV_IRQ_EXT		IRQ_S_EXT
-#endif /* CONFIG_RISCV_M_MODE */
+# define RV_IRQ_PMU	IRQ_PMU_OVF
+# define SIP_LCOFIP     (_AC(0x1, UL) << IRQ_PMU_OVF)
+
+#endif /* !CONFIG_RISCV_M_MODE */
 
 /* IE/IP (Supervisor/Machine Interrupt Enable/Pending) flags */
 #define IE_SIE		(_AC(0x1, UL) << RV_IRQ_SOFT)
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index addbdd932150..0bec9926e6ef 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -11,6 +11,9 @@
 #include <linux/mod_devicetable.h>
 #include <linux/perf/riscv_pmu.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
 
 #include <asm/sbi.h>
 
@@ -444,33 +447,203 @@ static int pmu_sbi_get_ctrinfo(int nctr)
 	return 0;
 }
 
+static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu)
+{
+	/**
+	 * No need to check the error because we are disabling all the counters
+	 * which may include counters that are not enabled yet.
+	 */
+	sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
+		  0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
+}
+
+static inline void pmu_sbi_start_all(struct riscv_pmu *pmu, uint64_t *ival)
+{
+	int lidx;
+	struct cpu_hw_events *hwc = this_cpu_ptr(pmu->hw_events);
+
+	/* Start all the enabled counters */
+	for_each_set_bit(lidx, hwc->used_event_ctrs, RISCV_MAX_COUNTERS)
+		sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, lidx, 1, 1,
+			  ival[lidx], ival[lidx] >> 32, 0);
+}
+
+static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
+{
+	struct perf_sample_data data;
+	struct pt_regs *regs;
+	struct hw_perf_event *hw_evt;
+	union sbi_pmu_ctr_info *info;
+	int lidx, hidx, fidx;
+	struct riscv_pmu *pmu;
+	struct perf_event *event;
+	struct cpu_hw_events *hwc = dev;
+	unsigned long overflow = csr_read(CSR_SSCOUNTOVF);
+	uint64_t ival[RISCV_MAX_COUNTERS] = {0};
+
+	/* No overflow bit is set */
+	if (!overflow) {
+		csr_clear(CSR_SIP, SIP_LCOFIP);
+		return IRQ_NONE;
+	}
+
+	fidx = find_first_bit(hwc->used_event_ctrs, RISCV_MAX_COUNTERS);
+	event = hwc->events[fidx];
+	if (!event) {
+		csr_clear(CSR_SIP, SIP_LCOFIP);
+		pr_warn("None of the counters are enabled\n");
+		return IRQ_NONE;
+	}
+
+	pmu = to_riscv_pmu(event->pmu);
+	pmu_sbi_stop_all(pmu);
+
+	/**
+	 * Overflow interrupt pending bit should only be cleared after stopping
+	 * all the counters to avoid any race condition.
+	 */
+	regs = get_irq_regs();
+	csr_clear(CSR_SIP, SIP_LCOFIP);
+
+	for_each_set_bit(lidx, hwc->used_event_ctrs, RISCV_MAX_COUNTERS) {
+		struct perf_event *event = hwc->events[lidx];
+
+		if (!event)
+			continue;
+		info = &pmu_ctr_list[lidx];
+		/* Firmware counter don't support overflow yet */
+		if (!info || info->type == SBI_PMU_CTR_TYPE_FW)
+			continue;
+
+		/* compute hardware counter index */
+		hidx = info->csr - CSR_CYCLE;
+		/* check if the corresponding bit is set in sscountovf */
+		if (!(overflow & (1 << hidx)))
+			continue;
+
+		hw_evt = &event->hw;
+		riscv_pmu_event_update(event);
+		perf_sample_data_init(&data, 0, hw_evt->last_period);
+		if (!riscv_pmu_event_set_period(event, &ival[lidx]))
+			continue;
+
+		/*
+		 * Perf event overflow will queue the processing of the event as
+		 * an irq_work which will be taken care of in the handling of
+		 * IPI_IRQ_WORK.
+		 */
+		if (perf_event_overflow(event, &data, regs))
+			pmu_sbi_ctr_stop(event, 0);
+	}
+	pmu_sbi_start_all(pmu, ival);
+
+	return IRQ_HANDLED;
+}
+
 static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 {
 	struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+	struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+	int pmu_irq;
 
 	/* Enable the access for TIME csr only from the user mode now */
 	csr_write(CSR_SCOUNTEREN, 0x2);
 
 	/* Stop all the counters so that they can be enabled from perf */
-	sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
-		  0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
-
+	pmu_sbi_stop_all(pmu);
+	pmu_irq = per_cpu(hw_events->irq, cpu);
+	if (pmu_irq) {
+		csr_clear(CSR_IP, BIT(RV_IRQ_PMU));
+		csr_set(CSR_IE, BIT(RV_IRQ_PMU));
+		enable_percpu_irq(pmu_irq, IRQ_TYPE_NONE);
+	}
 	return 0;
 }
 
 static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
 {
+	struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+	struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+	int pmu_irq;
+
+	pmu_irq = per_cpu(hw_events->irq, cpu);
+	if (pmu_irq) {
+		disable_percpu_irq(pmu_irq);
+		csr_clear(CSR_IE, BIT(RV_IRQ_PMU));
+	}
 	/* Disable all counters access for user mode now */
 	csr_write(CSR_SCOUNTEREN, 0x0);
 
 	return 0;
 }
 
+static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pdev)
+{
+	int i = 0, num_irqs, ret;
+	struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+
+	num_irqs = of_irq_count(node);
+
+	if (num_irqs <= 0) {
+		dev_warn(dev, "no irqs for PMU, sampling events not supported\n");
+		return -EPERM;
+	}
+
+	for (i = 0; i < num_irqs; i++) {
+		struct of_phandle_args parent;
+		irq_hw_number_t pmu_irq = 0;
+		int cpu, hartid;
+
+		if (of_irq_parse_one(node, i, &parent)) {
+			pr_err("%pOFP: failed to parse parent for irq %d.\n", node, i);
+			continue;
+		}
+
+		if (parent.args[0] != RV_IRQ_PMU) {
+			pr_err("%pOFP: invalid irq %d for hwirq %d.\n", node, i, parent.args[0]);
+			continue;
+		}
+
+		hartid = riscv_of_parent_hartid(parent.np);
+		if (hartid < 0) {
+			pr_warn("failed to parse hart ID for irq %d.\n", i);
+			continue;
+		}
+
+		cpu = riscv_hartid_to_cpuid(hartid);
+		if (cpu < 0) {
+			pr_warn("Invalid cpuid for irq %d\n", i);
+			continue;
+		}
+		if (!pmu_irq && irq_find_host(parent.np)) {
+			pmu_irq = irq_of_parse_and_map(node, i);
+			pr_err("%s: found irq %lu\n", __func__, pmu_irq);
+			if (pmu_irq)
+				ret = request_percpu_irq(pmu_irq, pmu_sbi_ovf_handler,
+							 "riscv-pmu", hw_events);
+			if (ret) {
+				pr_err("registering percpu irq failed [%d]\n", ret);
+				return ret;
+			}
+			if (per_cpu(hw_events->irq, cpu)) {
+				pr_warn("PMU irq already set!!");
+				return -EINVAL;
+			}
+			per_cpu(hw_events->irq, cpu) = pmu_irq;
+			per_cpu(hw_events->sscof_ext_present, cpu) = true;
+		}
+	}
+
+	return 0;
+}
+
 static int pmu_sbi_device_probe(struct platform_device *pdev)
 {
 	struct riscv_pmu *pmu = NULL;
 	int num_counters;
-	int ret;
+	int ret = -ENODEV;
 
 	pr_info("SBI PMU extension is available\n");
 	/* Notify legacy implementation that SBI pmu is available*/
@@ -482,13 +655,19 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	num_counters = pmu_sbi_find_num_ctrs();
 	if (num_counters < 0) {
 		pr_err("SBI PMU extension doesn't provide any counters\n");
-		return -ENODEV;
+		goto out_free;
 	}
 
 	/* cache all the information about counters now */
 	if (pmu_sbi_get_ctrinfo(num_counters))
-		return -ENODEV;
+		goto out_free;
 
+	ret = pmu_sbi_setup_irqs(pmu, pdev);
+	if (ret < 0) {
+		pr_info("Perf sampling/filtering is not supported as sscof extension is not available\n");
+		pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+		pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE;
+	}
 	pmu->num_counters = num_counters;
 	pmu->ctr_start = pmu_sbi_ctr_start;
 	pmu->ctr_stop = pmu_sbi_ctr_stop;
@@ -509,19 +688,27 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	}
 
 	return 0;
+
+out_free:
+	kfree(pmu);
+	return ret;
 }
 
+static const struct of_device_id riscv_pmu_of_device_ids[] = {
+	{.compatible = "riscv,pmu", .data = NULL},
+};
+
 static struct platform_driver pmu_sbi_driver = {
 	.probe		= pmu_sbi_device_probe,
 	.driver		= {
 		.name	= RISCV_PMU_PDEV_NAME,
+		.of_match_table = riscv_pmu_of_device_ids,
 	},
 };
 
 static int __init pmu_sbi_devinit(void)
 {
 	int ret;
-	struct platform_device *pdev;
 
 	if (((sbi_major_version() == 0) && (sbi_minor_version() < 3)) ||
 		sbi_probe_extension(SBI_EXT_PMU) <= 0) {
@@ -538,14 +725,6 @@ static int __init pmu_sbi_devinit(void)
 	}
 
 	ret = platform_driver_register(&pmu_sbi_driver);
-	if (ret)
-		return ret;
-
-	pdev = platform_device_register_simple(RISCV_PMU_PDEV_NAME, -1, NULL, 0);
-	if (IS_ERR(pdev)) {
-		platform_driver_unregister(&pmu_sbi_driver);
-		return PTR_ERR(pdev);
-	}
 
 	return ret;
 }
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index f3bce79d8998..afd93840754b 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -29,10 +29,13 @@
 struct cpu_hw_events {
 	/* currently enabled events */
 	int			n_events;
+	/* Counter overflow interrupt */
+	int		irq;
 	/* currently enabled events */
 	struct perf_event	*events[RISCV_MAX_COUNTERS];
 	/* currently enabled counters */
 	DECLARE_BITMAP(used_event_ctrs, RISCV_MAX_COUNTERS);
+	bool sscof_ext_present;
 };
 
 struct riscv_pmu {
@@ -40,7 +43,6 @@ struct riscv_pmu {
 	char		*name;
 
 	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
-	int		irq;
 
 	int		num_counters;
 	u64		(*ctr_read)(struct perf_event *event);
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 08/10] RISC-V: Add interrupt support for perf
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The Sscof extension allows counter overflow and filtering for programmable
counters. Enable the perf driver to handle the overflow interrupt.
Even though the perf overflow interrupt is a local one, it is parsed from
DT for simplification. Thus, the DT node with interrupt-extended property
is mandatory for any platform that wants event sampling.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/include/asm/csr.h   |   8 +-
 drivers/perf/riscv_pmu_sbi.c   | 209 ++++++++++++++++++++++++++++++---
 include/linux/perf/riscv_pmu.h |   4 +-
 3 files changed, 204 insertions(+), 17 deletions(-)

diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index e4d369830af4..8b2ac554ce9c 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -63,6 +63,7 @@
 #define IRQ_M_TIMER		7
 #define IRQ_S_EXT		9
 #define IRQ_M_EXT		11
+#define IRQ_PMU_OVF		13
 
 /* Exception causes */
 #define EXC_INST_MISALIGNED	0
@@ -151,6 +152,8 @@
 #define CSR_HPMCOUNTER30H	0xc9e
 #define CSR_HPMCOUNTER31H	0xc9f
 
+#define CSR_SSCOUNTOVF		0xd33
+
 #define CSR_SSTATUS		0x100
 #define CSR_SIE			0x104
 #define CSR_STVEC		0x105
@@ -212,7 +215,10 @@
 # define RV_IRQ_SOFT		IRQ_S_SOFT
 # define RV_IRQ_TIMER	IRQ_S_TIMER
 # define RV_IRQ_EXT		IRQ_S_EXT
-#endif /* CONFIG_RISCV_M_MODE */
+# define RV_IRQ_PMU	IRQ_PMU_OVF
+# define SIP_LCOFIP     (_AC(0x1, UL) << IRQ_PMU_OVF)
+
+#endif /* !CONFIG_RISCV_M_MODE */
 
 /* IE/IP (Supervisor/Machine Interrupt Enable/Pending) flags */
 #define IE_SIE		(_AC(0x1, UL) << RV_IRQ_SOFT)
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index addbdd932150..0bec9926e6ef 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -11,6 +11,9 @@
 #include <linux/mod_devicetable.h>
 #include <linux/perf/riscv_pmu.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
 
 #include <asm/sbi.h>
 
@@ -444,33 +447,203 @@ static int pmu_sbi_get_ctrinfo(int nctr)
 	return 0;
 }
 
+static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu)
+{
+	/**
+	 * No need to check the error because we are disabling all the counters
+	 * which may include counters that are not enabled yet.
+	 */
+	sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
+		  0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
+}
+
+static inline void pmu_sbi_start_all(struct riscv_pmu *pmu, uint64_t *ival)
+{
+	int lidx;
+	struct cpu_hw_events *hwc = this_cpu_ptr(pmu->hw_events);
+
+	/* Start all the enabled counters */
+	for_each_set_bit(lidx, hwc->used_event_ctrs, RISCV_MAX_COUNTERS)
+		sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, lidx, 1, 1,
+			  ival[lidx], ival[lidx] >> 32, 0);
+}
+
+static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
+{
+	struct perf_sample_data data;
+	struct pt_regs *regs;
+	struct hw_perf_event *hw_evt;
+	union sbi_pmu_ctr_info *info;
+	int lidx, hidx, fidx;
+	struct riscv_pmu *pmu;
+	struct perf_event *event;
+	struct cpu_hw_events *hwc = dev;
+	unsigned long overflow = csr_read(CSR_SSCOUNTOVF);
+	uint64_t ival[RISCV_MAX_COUNTERS] = {0};
+
+	/* No overflow bit is set */
+	if (!overflow) {
+		csr_clear(CSR_SIP, SIP_LCOFIP);
+		return IRQ_NONE;
+	}
+
+	fidx = find_first_bit(hwc->used_event_ctrs, RISCV_MAX_COUNTERS);
+	event = hwc->events[fidx];
+	if (!event) {
+		csr_clear(CSR_SIP, SIP_LCOFIP);
+		pr_warn("None of the counters are enabled\n");
+		return IRQ_NONE;
+	}
+
+	pmu = to_riscv_pmu(event->pmu);
+	pmu_sbi_stop_all(pmu);
+
+	/**
+	 * Overflow interrupt pending bit should only be cleared after stopping
+	 * all the counters to avoid any race condition.
+	 */
+	regs = get_irq_regs();
+	csr_clear(CSR_SIP, SIP_LCOFIP);
+
+	for_each_set_bit(lidx, hwc->used_event_ctrs, RISCV_MAX_COUNTERS) {
+		struct perf_event *event = hwc->events[lidx];
+
+		if (!event)
+			continue;
+		info = &pmu_ctr_list[lidx];
+		/* Firmware counter don't support overflow yet */
+		if (!info || info->type == SBI_PMU_CTR_TYPE_FW)
+			continue;
+
+		/* compute hardware counter index */
+		hidx = info->csr - CSR_CYCLE;
+		/* check if the corresponding bit is set in sscountovf */
+		if (!(overflow & (1 << hidx)))
+			continue;
+
+		hw_evt = &event->hw;
+		riscv_pmu_event_update(event);
+		perf_sample_data_init(&data, 0, hw_evt->last_period);
+		if (!riscv_pmu_event_set_period(event, &ival[lidx]))
+			continue;
+
+		/*
+		 * Perf event overflow will queue the processing of the event as
+		 * an irq_work which will be taken care of in the handling of
+		 * IPI_IRQ_WORK.
+		 */
+		if (perf_event_overflow(event, &data, regs))
+			pmu_sbi_ctr_stop(event, 0);
+	}
+	pmu_sbi_start_all(pmu, ival);
+
+	return IRQ_HANDLED;
+}
+
 static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 {
 	struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+	struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+	int pmu_irq;
 
 	/* Enable the access for TIME csr only from the user mode now */
 	csr_write(CSR_SCOUNTEREN, 0x2);
 
 	/* Stop all the counters so that they can be enabled from perf */
-	sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP,
-		  0, GENMASK_ULL(pmu->num_counters - 1, 0), 0, 0, 0, 0);
-
+	pmu_sbi_stop_all(pmu);
+	pmu_irq = per_cpu(hw_events->irq, cpu);
+	if (pmu_irq) {
+		csr_clear(CSR_IP, BIT(RV_IRQ_PMU));
+		csr_set(CSR_IE, BIT(RV_IRQ_PMU));
+		enable_percpu_irq(pmu_irq, IRQ_TYPE_NONE);
+	}
 	return 0;
 }
 
 static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
 {
+	struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node);
+	struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+	int pmu_irq;
+
+	pmu_irq = per_cpu(hw_events->irq, cpu);
+	if (pmu_irq) {
+		disable_percpu_irq(pmu_irq);
+		csr_clear(CSR_IE, BIT(RV_IRQ_PMU));
+	}
 	/* Disable all counters access for user mode now */
 	csr_write(CSR_SCOUNTEREN, 0x0);
 
 	return 0;
 }
 
+static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pdev)
+{
+	int i = 0, num_irqs, ret;
+	struct cpu_hw_events __percpu *hw_events = pmu->hw_events;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+
+	num_irqs = of_irq_count(node);
+
+	if (num_irqs <= 0) {
+		dev_warn(dev, "no irqs for PMU, sampling events not supported\n");
+		return -EPERM;
+	}
+
+	for (i = 0; i < num_irqs; i++) {
+		struct of_phandle_args parent;
+		irq_hw_number_t pmu_irq = 0;
+		int cpu, hartid;
+
+		if (of_irq_parse_one(node, i, &parent)) {
+			pr_err("%pOFP: failed to parse parent for irq %d.\n", node, i);
+			continue;
+		}
+
+		if (parent.args[0] != RV_IRQ_PMU) {
+			pr_err("%pOFP: invalid irq %d for hwirq %d.\n", node, i, parent.args[0]);
+			continue;
+		}
+
+		hartid = riscv_of_parent_hartid(parent.np);
+		if (hartid < 0) {
+			pr_warn("failed to parse hart ID for irq %d.\n", i);
+			continue;
+		}
+
+		cpu = riscv_hartid_to_cpuid(hartid);
+		if (cpu < 0) {
+			pr_warn("Invalid cpuid for irq %d\n", i);
+			continue;
+		}
+		if (!pmu_irq && irq_find_host(parent.np)) {
+			pmu_irq = irq_of_parse_and_map(node, i);
+			pr_err("%s: found irq %lu\n", __func__, pmu_irq);
+			if (pmu_irq)
+				ret = request_percpu_irq(pmu_irq, pmu_sbi_ovf_handler,
+							 "riscv-pmu", hw_events);
+			if (ret) {
+				pr_err("registering percpu irq failed [%d]\n", ret);
+				return ret;
+			}
+			if (per_cpu(hw_events->irq, cpu)) {
+				pr_warn("PMU irq already set!!");
+				return -EINVAL;
+			}
+			per_cpu(hw_events->irq, cpu) = pmu_irq;
+			per_cpu(hw_events->sscof_ext_present, cpu) = true;
+		}
+	}
+
+	return 0;
+}
+
 static int pmu_sbi_device_probe(struct platform_device *pdev)
 {
 	struct riscv_pmu *pmu = NULL;
 	int num_counters;
-	int ret;
+	int ret = -ENODEV;
 
 	pr_info("SBI PMU extension is available\n");
 	/* Notify legacy implementation that SBI pmu is available*/
@@ -482,13 +655,19 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	num_counters = pmu_sbi_find_num_ctrs();
 	if (num_counters < 0) {
 		pr_err("SBI PMU extension doesn't provide any counters\n");
-		return -ENODEV;
+		goto out_free;
 	}
 
 	/* cache all the information about counters now */
 	if (pmu_sbi_get_ctrinfo(num_counters))
-		return -ENODEV;
+		goto out_free;
 
+	ret = pmu_sbi_setup_irqs(pmu, pdev);
+	if (ret < 0) {
+		pr_info("Perf sampling/filtering is not supported as sscof extension is not available\n");
+		pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+		pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE;
+	}
 	pmu->num_counters = num_counters;
 	pmu->ctr_start = pmu_sbi_ctr_start;
 	pmu->ctr_stop = pmu_sbi_ctr_stop;
@@ -509,19 +688,27 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	}
 
 	return 0;
+
+out_free:
+	kfree(pmu);
+	return ret;
 }
 
+static const struct of_device_id riscv_pmu_of_device_ids[] = {
+	{.compatible = "riscv,pmu", .data = NULL},
+};
+
 static struct platform_driver pmu_sbi_driver = {
 	.probe		= pmu_sbi_device_probe,
 	.driver		= {
 		.name	= RISCV_PMU_PDEV_NAME,
+		.of_match_table = riscv_pmu_of_device_ids,
 	},
 };
 
 static int __init pmu_sbi_devinit(void)
 {
 	int ret;
-	struct platform_device *pdev;
 
 	if (((sbi_major_version() == 0) && (sbi_minor_version() < 3)) ||
 		sbi_probe_extension(SBI_EXT_PMU) <= 0) {
@@ -538,14 +725,6 @@ static int __init pmu_sbi_devinit(void)
 	}
 
 	ret = platform_driver_register(&pmu_sbi_driver);
-	if (ret)
-		return ret;
-
-	pdev = platform_device_register_simple(RISCV_PMU_PDEV_NAME, -1, NULL, 0);
-	if (IS_ERR(pdev)) {
-		platform_driver_unregister(&pmu_sbi_driver);
-		return PTR_ERR(pdev);
-	}
 
 	return ret;
 }
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index f3bce79d8998..afd93840754b 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -29,10 +29,13 @@
 struct cpu_hw_events {
 	/* currently enabled events */
 	int			n_events;
+	/* Counter overflow interrupt */
+	int		irq;
 	/* currently enabled events */
 	struct perf_event	*events[RISCV_MAX_COUNTERS];
 	/* currently enabled counters */
 	DECLARE_BITMAP(used_event_ctrs, RISCV_MAX_COUNTERS);
+	bool sscof_ext_present;
 };
 
 struct riscv_pmu {
@@ -40,7 +43,6 @@ struct riscv_pmu {
 	char		*name;
 
 	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
-	int		irq;
 
 	int		num_counters;
 	u64		(*ctr_read)(struct perf_event *event);
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 09/10] Documentation: riscv: Remove the old documentation
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The existing pmu documentation describes the limitation of perf infrastructure
in RISC-V ISA and limited feature set of perf in RISC-V.

However, SBI PMU extension and sscofpmf extension(ISA extension) allows to
implement most of the required features of perf. Remove the old documentation
which is not accurate anymore.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 Documentation/riscv/pmu.rst | 255 ------------------------------------
 1 file changed, 255 deletions(-)
 delete mode 100644 Documentation/riscv/pmu.rst

diff --git a/Documentation/riscv/pmu.rst b/Documentation/riscv/pmu.rst
deleted file mode 100644
index acb216b99c26..000000000000
--- a/Documentation/riscv/pmu.rst
+++ /dev/null
@@ -1,255 +0,0 @@
-===================================
-Supporting PMUs on RISC-V platforms
-===================================
-
-Alan Kao <alankao@andestech.com>, Mar 2018
-
-Introduction
-------------
-
-As of this writing, perf_event-related features mentioned in The RISC-V ISA
-Privileged Version 1.10 are as follows:
-(please check the manual for more details)
-
-* [m|s]counteren
-* mcycle[h], cycle[h]
-* minstret[h], instret[h]
-* mhpeventx, mhpcounterx[h]
-
-With such function set only, porting perf would require a lot of work, due to
-the lack of the following general architectural performance monitoring features:
-
-* Enabling/Disabling counters
-  Counters are just free-running all the time in our case.
-* Interrupt caused by counter overflow
-  No such feature in the spec.
-* Interrupt indicator
-  It is not possible to have many interrupt ports for all counters, so an
-  interrupt indicator is required for software to tell which counter has
-  just overflowed.
-* Writing to counters
-  There will be an SBI to support this since the kernel cannot modify the
-  counters [1].  Alternatively, some vendor considers to implement
-  hardware-extension for M-S-U model machines to write counters directly.
-
-This document aims to provide developers a quick guide on supporting their
-PMUs in the kernel.  The following sections briefly explain perf' mechanism
-and todos.
-
-You may check previous discussions here [1][2].  Also, it might be helpful
-to check the appendix for related kernel structures.
-
-
-1. Initialization
------------------
-
-*riscv_pmu* is a global pointer of type *struct riscv_pmu*, which contains
-various methods according to perf's internal convention and PMU-specific
-parameters.  One should declare such instance to represent the PMU.  By default,
-*riscv_pmu* points to a constant structure *riscv_base_pmu*, which has very
-basic support to a baseline QEMU model.
-
-Then he/she can either assign the instance's pointer to *riscv_pmu* so that
-the minimal and already-implemented logic can be leveraged, or invent his/her
-own *riscv_init_platform_pmu* implementation.
-
-In other words, existing sources of *riscv_base_pmu* merely provide a
-reference implementation.  Developers can flexibly decide how many parts they
-can leverage, and in the most extreme case, they can customize every function
-according to their needs.
-
-
-2. Event Initialization
------------------------
-
-When a user launches a perf command to monitor some events, it is first
-interpreted by the userspace perf tool into multiple *perf_event_open*
-system calls, and then each of them calls to the body of *event_init*
-member function that was assigned in the previous step.  In *riscv_base_pmu*'s
-case, it is *riscv_event_init*.
-
-The main purpose of this function is to translate the event provided by user
-into bitmap, so that HW-related control registers or counters can directly be
-manipulated.  The translation is based on the mappings and methods provided in
-*riscv_pmu*.
-
-Note that some features can be done in this stage as well:
-
-(1) interrupt setting, which is stated in the next section;
-(2) privilege level setting (user space only, kernel space only, both);
-(3) destructor setting.  Normally it is sufficient to apply *riscv_destroy_event*;
-(4) tweaks for non-sampling events, which will be utilized by functions such as
-    *perf_adjust_period*, usually something like the follows::
-
-      if (!is_sampling_event(event)) {
-              hwc->sample_period = x86_pmu.max_period;
-              hwc->last_period = hwc->sample_period;
-              local64_set(&hwc->period_left, hwc->sample_period);
-      }
-
-In the case of *riscv_base_pmu*, only (3) is provided for now.
-
-
-3. Interrupt
-------------
-
-3.1. Interrupt Initialization
-
-This often occurs at the beginning of the *event_init* method. In common
-practice, this should be a code segment like::
-
-  int x86_reserve_hardware(void)
-  {
-        int err = 0;
-
-        if (!atomic_inc_not_zero(&pmc_refcount)) {
-                mutex_lock(&pmc_reserve_mutex);
-                if (atomic_read(&pmc_refcount) == 0) {
-                        if (!reserve_pmc_hardware())
-                                err = -EBUSY;
-                        else
-                                reserve_ds_buffers();
-                }
-                if (!err)
-                        atomic_inc(&pmc_refcount);
-                mutex_unlock(&pmc_reserve_mutex);
-        }
-
-        return err;
-  }
-
-And the magic is in *reserve_pmc_hardware*, which usually does atomic
-operations to make implemented IRQ accessible from some global function pointer.
-*release_pmc_hardware* serves the opposite purpose, and it is used in event
-destructors mentioned in previous section.
-
-(Note: From the implementations in all the architectures, the *reserve/release*
-pair are always IRQ settings, so the *pmc_hardware* seems somehow misleading.
-It does NOT deal with the binding between an event and a physical counter,
-which will be introduced in the next section.)
-
-3.2. IRQ Structure
-
-Basically, a IRQ runs the following pseudo code::
-
-  for each hardware counter that triggered this overflow
-
-      get the event of this counter
-
-      // following two steps are defined as *read()*,
-      // check the section Reading/Writing Counters for details.
-      count the delta value since previous interrupt
-      update the event->count (# event occurs) by adding delta, and
-                 event->hw.period_left by subtracting delta
-
-      if the event overflows
-          sample data
-          set the counter appropriately for the next overflow
-
-          if the event overflows again
-              too frequently, throttle this event
-          fi
-      fi
-
-  end for
-
-However as of this writing, none of the RISC-V implementations have designed an
-interrupt for perf, so the details are to be completed in the future.
-
-4. Reading/Writing Counters
----------------------------
-
-They seem symmetric but perf treats them quite differently.  For reading, there
-is a *read* interface in *struct pmu*, but it serves more than just reading.
-According to the context, the *read* function not only reads the content of the
-counter (event->count), but also updates the left period to the next interrupt
-(event->hw.period_left).
-
-But the core of perf does not need direct write to counters.  Writing counters
-is hidden behind the abstraction of 1) *pmu->start*, literally start counting so one
-has to set the counter to a good value for the next interrupt; 2) inside the IRQ
-it should set the counter to the same resonable value.
-
-Reading is not a problem in RISC-V but writing would need some effort, since
-counters are not allowed to be written by S-mode.
-
-
-5. add()/del()/start()/stop()
------------------------------
-
-Basic idea: add()/del() adds/deletes events to/from a PMU, and start()/stop()
-starts/stop the counter of some event in the PMU.  All of them take the same
-arguments: *struct perf_event *event* and *int flag*.
-
-Consider perf as a state machine, then you will find that these functions serve
-as the state transition process between those states.
-Three states (event->hw.state) are defined:
-
-* PERF_HES_STOPPED:	the counter is stopped
-* PERF_HES_UPTODATE:	the event->count is up-to-date
-* PERF_HES_ARCH:	arch-dependent usage ... we don't need this for now
-
-A normal flow of these state transitions are as follows:
-
-* A user launches a perf event, resulting in calling to *event_init*.
-* When being context-switched in, *add* is called by the perf core, with a flag
-  PERF_EF_START, which means that the event should be started after it is added.
-  At this stage, a general event is bound to a physical counter, if any.
-  The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, because it is now
-  stopped, and the (software) event count does not need updating.
-
-  - *start* is then called, and the counter is enabled.
-    With flag PERF_EF_RELOAD, it writes an appropriate value to the counter (check
-    previous section for detail).
-    Nothing is written if the flag does not contain PERF_EF_RELOAD.
-    The state now is reset to none, because it is neither stopped nor updated
-    (the counting already started)
-
-* When being context-switched out, *del* is called.  It then checks out all the
-  events in the PMU and calls *stop* to update their counts.
-
-  - *stop* is called by *del*
-    and the perf core with flag PERF_EF_UPDATE, and it often shares the same
-    subroutine as *read* with the same logic.
-    The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, again.
-
-  - Life cycle of these two pairs: *add* and *del* are called repeatedly as
-    tasks switch in-and-out; *start* and *stop* is also called when the perf core
-    needs a quick stop-and-start, for instance, when the interrupt period is being
-    adjusted.
-
-Current implementation is sufficient for now and can be easily extended to
-features in the future.
-
-A. Related Structures
----------------------
-
-* struct pmu: include/linux/perf_event.h
-* struct riscv_pmu: arch/riscv/include/asm/perf_event.h
-
-  Both structures are designed to be read-only.
-
-  *struct pmu* defines some function pointer interfaces, and most of them take
-  *struct perf_event* as a main argument, dealing with perf events according to
-  perf's internal state machine (check kernel/events/core.c for details).
-
-  *struct riscv_pmu* defines PMU-specific parameters.  The naming follows the
-  convention of all other architectures.
-
-* struct perf_event: include/linux/perf_event.h
-* struct hw_perf_event
-
-  The generic structure that represents perf events, and the hardware-related
-  details.
-
-* struct riscv_hw_events: arch/riscv/include/asm/perf_event.h
-
-  The structure that holds the status of events, has two fixed members:
-  the number of events and the array of the events.
-
-References
-----------
-
-[1] https://github.com/riscv/riscv-linux/pull/124
-
-[2] https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/f19TmCNP6yA
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 09/10] Documentation: riscv: Remove the old documentation
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

The existing pmu documentation describes the limitation of perf infrastructure
in RISC-V ISA and limited feature set of perf in RISC-V.

However, SBI PMU extension and sscofpmf extension(ISA extension) allows to
implement most of the required features of perf. Remove the old documentation
which is not accurate anymore.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 Documentation/riscv/pmu.rst | 255 ------------------------------------
 1 file changed, 255 deletions(-)
 delete mode 100644 Documentation/riscv/pmu.rst

diff --git a/Documentation/riscv/pmu.rst b/Documentation/riscv/pmu.rst
deleted file mode 100644
index acb216b99c26..000000000000
--- a/Documentation/riscv/pmu.rst
+++ /dev/null
@@ -1,255 +0,0 @@
-===================================
-Supporting PMUs on RISC-V platforms
-===================================
-
-Alan Kao <alankao@andestech.com>, Mar 2018
-
-Introduction
-------------
-
-As of this writing, perf_event-related features mentioned in The RISC-V ISA
-Privileged Version 1.10 are as follows:
-(please check the manual for more details)
-
-* [m|s]counteren
-* mcycle[h], cycle[h]
-* minstret[h], instret[h]
-* mhpeventx, mhpcounterx[h]
-
-With such function set only, porting perf would require a lot of work, due to
-the lack of the following general architectural performance monitoring features:
-
-* Enabling/Disabling counters
-  Counters are just free-running all the time in our case.
-* Interrupt caused by counter overflow
-  No such feature in the spec.
-* Interrupt indicator
-  It is not possible to have many interrupt ports for all counters, so an
-  interrupt indicator is required for software to tell which counter has
-  just overflowed.
-* Writing to counters
-  There will be an SBI to support this since the kernel cannot modify the
-  counters [1].  Alternatively, some vendor considers to implement
-  hardware-extension for M-S-U model machines to write counters directly.
-
-This document aims to provide developers a quick guide on supporting their
-PMUs in the kernel.  The following sections briefly explain perf' mechanism
-and todos.
-
-You may check previous discussions here [1][2].  Also, it might be helpful
-to check the appendix for related kernel structures.
-
-
-1. Initialization
------------------
-
-*riscv_pmu* is a global pointer of type *struct riscv_pmu*, which contains
-various methods according to perf's internal convention and PMU-specific
-parameters.  One should declare such instance to represent the PMU.  By default,
-*riscv_pmu* points to a constant structure *riscv_base_pmu*, which has very
-basic support to a baseline QEMU model.
-
-Then he/she can either assign the instance's pointer to *riscv_pmu* so that
-the minimal and already-implemented logic can be leveraged, or invent his/her
-own *riscv_init_platform_pmu* implementation.
-
-In other words, existing sources of *riscv_base_pmu* merely provide a
-reference implementation.  Developers can flexibly decide how many parts they
-can leverage, and in the most extreme case, they can customize every function
-according to their needs.
-
-
-2. Event Initialization
------------------------
-
-When a user launches a perf command to monitor some events, it is first
-interpreted by the userspace perf tool into multiple *perf_event_open*
-system calls, and then each of them calls to the body of *event_init*
-member function that was assigned in the previous step.  In *riscv_base_pmu*'s
-case, it is *riscv_event_init*.
-
-The main purpose of this function is to translate the event provided by user
-into bitmap, so that HW-related control registers or counters can directly be
-manipulated.  The translation is based on the mappings and methods provided in
-*riscv_pmu*.
-
-Note that some features can be done in this stage as well:
-
-(1) interrupt setting, which is stated in the next section;
-(2) privilege level setting (user space only, kernel space only, both);
-(3) destructor setting.  Normally it is sufficient to apply *riscv_destroy_event*;
-(4) tweaks for non-sampling events, which will be utilized by functions such as
-    *perf_adjust_period*, usually something like the follows::
-
-      if (!is_sampling_event(event)) {
-              hwc->sample_period = x86_pmu.max_period;
-              hwc->last_period = hwc->sample_period;
-              local64_set(&hwc->period_left, hwc->sample_period);
-      }
-
-In the case of *riscv_base_pmu*, only (3) is provided for now.
-
-
-3. Interrupt
-------------
-
-3.1. Interrupt Initialization
-
-This often occurs at the beginning of the *event_init* method. In common
-practice, this should be a code segment like::
-
-  int x86_reserve_hardware(void)
-  {
-        int err = 0;
-
-        if (!atomic_inc_not_zero(&pmc_refcount)) {
-                mutex_lock(&pmc_reserve_mutex);
-                if (atomic_read(&pmc_refcount) == 0) {
-                        if (!reserve_pmc_hardware())
-                                err = -EBUSY;
-                        else
-                                reserve_ds_buffers();
-                }
-                if (!err)
-                        atomic_inc(&pmc_refcount);
-                mutex_unlock(&pmc_reserve_mutex);
-        }
-
-        return err;
-  }
-
-And the magic is in *reserve_pmc_hardware*, which usually does atomic
-operations to make implemented IRQ accessible from some global function pointer.
-*release_pmc_hardware* serves the opposite purpose, and it is used in event
-destructors mentioned in previous section.
-
-(Note: From the implementations in all the architectures, the *reserve/release*
-pair are always IRQ settings, so the *pmc_hardware* seems somehow misleading.
-It does NOT deal with the binding between an event and a physical counter,
-which will be introduced in the next section.)
-
-3.2. IRQ Structure
-
-Basically, a IRQ runs the following pseudo code::
-
-  for each hardware counter that triggered this overflow
-
-      get the event of this counter
-
-      // following two steps are defined as *read()*,
-      // check the section Reading/Writing Counters for details.
-      count the delta value since previous interrupt
-      update the event->count (# event occurs) by adding delta, and
-                 event->hw.period_left by subtracting delta
-
-      if the event overflows
-          sample data
-          set the counter appropriately for the next overflow
-
-          if the event overflows again
-              too frequently, throttle this event
-          fi
-      fi
-
-  end for
-
-However as of this writing, none of the RISC-V implementations have designed an
-interrupt for perf, so the details are to be completed in the future.
-
-4. Reading/Writing Counters
----------------------------
-
-They seem symmetric but perf treats them quite differently.  For reading, there
-is a *read* interface in *struct pmu*, but it serves more than just reading.
-According to the context, the *read* function not only reads the content of the
-counter (event->count), but also updates the left period to the next interrupt
-(event->hw.period_left).
-
-But the core of perf does not need direct write to counters.  Writing counters
-is hidden behind the abstraction of 1) *pmu->start*, literally start counting so one
-has to set the counter to a good value for the next interrupt; 2) inside the IRQ
-it should set the counter to the same resonable value.
-
-Reading is not a problem in RISC-V but writing would need some effort, since
-counters are not allowed to be written by S-mode.
-
-
-5. add()/del()/start()/stop()
------------------------------
-
-Basic idea: add()/del() adds/deletes events to/from a PMU, and start()/stop()
-starts/stop the counter of some event in the PMU.  All of them take the same
-arguments: *struct perf_event *event* and *int flag*.
-
-Consider perf as a state machine, then you will find that these functions serve
-as the state transition process between those states.
-Three states (event->hw.state) are defined:
-
-* PERF_HES_STOPPED:	the counter is stopped
-* PERF_HES_UPTODATE:	the event->count is up-to-date
-* PERF_HES_ARCH:	arch-dependent usage ... we don't need this for now
-
-A normal flow of these state transitions are as follows:
-
-* A user launches a perf event, resulting in calling to *event_init*.
-* When being context-switched in, *add* is called by the perf core, with a flag
-  PERF_EF_START, which means that the event should be started after it is added.
-  At this stage, a general event is bound to a physical counter, if any.
-  The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, because it is now
-  stopped, and the (software) event count does not need updating.
-
-  - *start* is then called, and the counter is enabled.
-    With flag PERF_EF_RELOAD, it writes an appropriate value to the counter (check
-    previous section for detail).
-    Nothing is written if the flag does not contain PERF_EF_RELOAD.
-    The state now is reset to none, because it is neither stopped nor updated
-    (the counting already started)
-
-* When being context-switched out, *del* is called.  It then checks out all the
-  events in the PMU and calls *stop* to update their counts.
-
-  - *stop* is called by *del*
-    and the perf core with flag PERF_EF_UPDATE, and it often shares the same
-    subroutine as *read* with the same logic.
-    The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, again.
-
-  - Life cycle of these two pairs: *add* and *del* are called repeatedly as
-    tasks switch in-and-out; *start* and *stop* is also called when the perf core
-    needs a quick stop-and-start, for instance, when the interrupt period is being
-    adjusted.
-
-Current implementation is sufficient for now and can be easily extended to
-features in the future.
-
-A. Related Structures
----------------------
-
-* struct pmu: include/linux/perf_event.h
-* struct riscv_pmu: arch/riscv/include/asm/perf_event.h
-
-  Both structures are designed to be read-only.
-
-  *struct pmu* defines some function pointer interfaces, and most of them take
-  *struct perf_event* as a main argument, dealing with perf events according to
-  perf's internal state machine (check kernel/events/core.c for details).
-
-  *struct riscv_pmu* defines PMU-specific parameters.  The naming follows the
-  convention of all other architectures.
-
-* struct perf_event: include/linux/perf_event.h
-* struct hw_perf_event
-
-  The generic structure that represents perf events, and the hardware-related
-  details.
-
-* struct riscv_hw_events: arch/riscv/include/asm/perf_event.h
-
-  The structure that holds the status of events, has two fixed members:
-  the number of events and the array of the events.
-
-References
-----------
-
-[1] https://github.com/riscv/riscv-linux/pull/124
-
-[2] https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/f19TmCNP6yA
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 10/10] MAINTAINERS: Add entry for RISC-V PMU drivers
  2021-09-10 19:27 ` Atish Patra
@ 2021-09-10 19:27   ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

Add myself and Anup as maintainer for RISC-V PMU drivers.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 9af529acb6a6..6a184a4162b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16056,6 +16056,16 @@ S:	Maintained
 F:	drivers/mtd/nand/raw/r852.c
 F:	drivers/mtd/nand/raw/r852.h
 
+RISC-V PMU DRIVERS
+M:	Atish Patra <atish.patra@wdc.com>
+M:	Anup Patel <anup.patel@wdc.com>
+L:	linux-riscv@lists.infradead.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pmu/riscv,pmu.yaml
+F:	drivers/perf/riscv_pmu.c
+F:	drivers/perf/riscv_pmu_legacy.c
+F:	drivers/perf/riscv_pmu_sbi.c
+
 RISC-V ARCHITECTURE
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 36+ messages in thread
* [v3 10/10] MAINTAINERS: Add entry for RISC-V PMU drivers
@ 2021-09-10 19:27   ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-09-10 19:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Atish Patra, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

Add myself and Anup as maintainer for RISC-V PMU drivers.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 9af529acb6a6..6a184a4162b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16056,6 +16056,16 @@ S:	Maintained
 F:	drivers/mtd/nand/raw/r852.c
 F:	drivers/mtd/nand/raw/r852.h
 
+RISC-V PMU DRIVERS
+M:	Atish Patra <atish.patra@wdc.com>
+M:	Anup Patel <anup.patel@wdc.com>
+L:	linux-riscv@lists.infradead.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pmu/riscv,pmu.yaml
+F:	drivers/perf/riscv_pmu.c
+F:	drivers/perf/riscv_pmu_legacy.c
+F:	drivers/perf/riscv_pmu_sbi.c
+
 RISC-V ARCHITECTURE
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
-- 
2.31.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 36+ messages in thread
* Re: [v3 06/10] dt-binding: pmu: Add RISC-V PMU DT bindings
  2021-09-10 19:27   ` Atish Patra
@ 2021-09-13 12:18     ` Rob Herring
  -1 siblings, 0 replies; 36+ messages in thread
From: Rob Herring @ 2021-09-13 12:18 UTC (permalink / raw)
  To: Atish Patra
  Cc: devicetree, Palmer Dabbelt, Jonathan Corbet, Anup Patel,
	linux-doc, Vincent Chen, Guo Ren, Alexander Shishkin,
	Heinrich Schuchardt, Rob Herring, Darrick J. Wong, Paul Walmsley,
	John Garry, linux-kernel, Nick Kossifidis, linux-riscv,
	Ard Biesheuvel, linux-perf-users, Jiri Olsa

On Fri, 10 Sep 2021 12:27:53 -0700, Atish Patra wrote:
> This patch adds the DT bindings for RISC-V PMU driver. It also defines
> the interrupt related properties to allow counter overflow interrupt.
> 
> Signed-off-by: Atish Patra <atish.patra@wdc.com>
> ---
>  .../devicetree/bindings/perf/riscv,pmu.yaml   | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/riscv,pmu.yaml: 'optional' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'patternProperties', 'properties', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select']
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
./Documentation/devicetree/bindings/perf/riscv,pmu.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/perf/riscv,pmu.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/riscv,pmu.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/perf/riscv,pmu.yaml
Documentation/devicetree/bindings/perf/riscv,pmu.example.dt.yaml:0:0: /example-0/pmu: failed to match any schema with compatible: ['riscv,pmu']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1526606

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 06/10] dt-binding: pmu: Add RISC-V PMU DT bindings
@ 2021-09-13 12:18     ` Rob Herring
  0 siblings, 0 replies; 36+ messages in thread
From: Rob Herring @ 2021-09-13 12:18 UTC (permalink / raw)
  To: Atish Patra
  Cc: devicetree, Palmer Dabbelt, Jonathan Corbet, Anup Patel,
	linux-doc, Vincent Chen, Guo Ren, Alexander Shishkin,
	Heinrich Schuchardt, Rob Herring, Darrick J. Wong, Paul Walmsley,
	John Garry, linux-kernel, Nick Kossifidis, linux-riscv,
	Ard Biesheuvel, linux-perf-users, Jiri Olsa

On Fri, 10 Sep 2021 12:27:53 -0700, Atish Patra wrote:
> This patch adds the DT bindings for RISC-V PMU driver. It also defines
> the interrupt related properties to allow counter overflow interrupt.
> 
> Signed-off-by: Atish Patra <atish.patra@wdc.com>
> ---
>  .../devicetree/bindings/perf/riscv,pmu.yaml   | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/riscv,pmu.yaml: 'optional' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'patternProperties', 'properties', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select']
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
./Documentation/devicetree/bindings/perf/riscv,pmu.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/perf/riscv,pmu.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/perf/riscv,pmu.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/perf/riscv,pmu.yaml
Documentation/devicetree/bindings/perf/riscv,pmu.example.dt.yaml:0:0: /example-0/pmu: failed to match any schema with compatible: ['riscv,pmu']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1526606

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 06/10] dt-binding: pmu: Add RISC-V PMU DT bindings
  2021-09-10 19:27   ` Atish Patra
@ 2021-09-14 15:50     ` Rob Herring
  -1 siblings, 0 replies; 36+ messages in thread
From: Rob Herring @ 2021-09-14 15:50 UTC (permalink / raw)
  To: Atish Patra
  Cc: linux-kernel, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Vincent Chen

On Fri, Sep 10, 2021 at 12:27:53PM -0700, Atish Patra wrote:
> This patch adds the DT bindings for RISC-V PMU driver. It also defines
> the interrupt related properties to allow counter overflow interrupt.
> 
> Signed-off-by: Atish Patra <atish.patra@wdc.com>
> ---
>  .../devicetree/bindings/perf/riscv,pmu.yaml   | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> new file mode 100644
> index 000000000000..497caad63f16
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pmu/riscv,pmu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RISC-V PMU
> +
> +maintainers:
> +  - Atish Patra <atish.patra@wdc.com>
> +
> +description:
> +  The "Sscofpmf" extension allows the RISC-V PMU counters to overflow and
> +  generate a local interrupt so that event sampling can be done from user-space.
> +  The above said ISA extension is an optional extension to maintain backward
> +  compatibility and will be included in privilege specification v1.12 . That's
> +  why the interrupt property is marked as optional. The platforms with sscofpmf
> +  extension should add this property to enable event sampling.
> +  The device tree node with the compatible string is mandatory for any platform
> +  that wants to use pmu counter start/stop methods using SBI PMU extension.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - riscv,pmu
> +
> +    description:
> +      Should be "riscv,pmu".

The schema already says this.

Just 'pmu' isn't very specific. No version to attach here?

> +
> +  interrupts-extended:
> +    minItems: 1
> +    maxItems: 4095
> +
> +additionalProperties: false
> +
> +required:
> +  - None
> +optional:
> +  - compatible

Besides 'optional' not being the in vocabulary, 'compatible' is never 
optional.

> +  - interrupts-extended
> +
> +examples:
> +  - |
> +    pmu {
> +      compatible = "riscv,pmu";
> +      interrupts-extended = <&cpu0intc 13>,
> +                            <&cpu1intc 13>,
> +                            <&cpu2intc 13>,
> +                            <&cpu3intc 13>;
> +    };
> +...
> -- 
> 2.31.1
> 
> 

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 06/10] dt-binding: pmu: Add RISC-V PMU DT bindings
@ 2021-09-14 15:50     ` Rob Herring
  0 siblings, 0 replies; 36+ messages in thread
From: Rob Herring @ 2021-09-14 15:50 UTC (permalink / raw)
  To: Atish Patra
  Cc: linux-kernel, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Vincent Chen

On Fri, Sep 10, 2021 at 12:27:53PM -0700, Atish Patra wrote:
> This patch adds the DT bindings for RISC-V PMU driver. It also defines
> the interrupt related properties to allow counter overflow interrupt.
> 
> Signed-off-by: Atish Patra <atish.patra@wdc.com>
> ---
>  .../devicetree/bindings/perf/riscv,pmu.yaml   | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> new file mode 100644
> index 000000000000..497caad63f16
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pmu/riscv,pmu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RISC-V PMU
> +
> +maintainers:
> +  - Atish Patra <atish.patra@wdc.com>
> +
> +description:
> +  The "Sscofpmf" extension allows the RISC-V PMU counters to overflow and
> +  generate a local interrupt so that event sampling can be done from user-space.
> +  The above said ISA extension is an optional extension to maintain backward
> +  compatibility and will be included in privilege specification v1.12 . That's
> +  why the interrupt property is marked as optional. The platforms with sscofpmf
> +  extension should add this property to enable event sampling.
> +  The device tree node with the compatible string is mandatory for any platform
> +  that wants to use pmu counter start/stop methods using SBI PMU extension.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - riscv,pmu
> +
> +    description:
> +      Should be "riscv,pmu".

The schema already says this.

Just 'pmu' isn't very specific. No version to attach here?

> +
> +  interrupts-extended:
> +    minItems: 1
> +    maxItems: 4095
> +
> +additionalProperties: false
> +
> +required:
> +  - None
> +optional:
> +  - compatible

Besides 'optional' not being the in vocabulary, 'compatible' is never 
optional.

> +  - interrupts-extended
> +
> +examples:
> +  - |
> +    pmu {
> +      compatible = "riscv,pmu";
> +      interrupts-extended = <&cpu0intc 13>,
> +                            <&cpu1intc 13>,
> +                            <&cpu2intc 13>,
> +                            <&cpu3intc 13>;
> +    };
> +...
> -- 
> 2.31.1
> 
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 01/10] RISC-V: Remove the current perf implementation
       [not found]   ` <238571632287002@mail.yandex.ru>
@ 2021-09-22  5:25       ` Nikita Shubin
  0 siblings, 0 replies; 36+ messages in thread
From: Nikita Shubin @ 2021-09-22  5:25 UTC (permalink / raw)
  To: Atish Patra, linux-kernel
  Cc: Alexander Shishkin, Anup Patel, Ard Biesheuvel, Darrick J. Wong,
	devicetree, Guo Ren, Heinrich Schuchardt, Jiri Olsa, John Garry,
	Jonathan Corbet, linux-doc, linux-perf-users, linux-riscv,
	Nick Kossifidis, Palmer Dabbelt, Paul Walmsley, Rob Herring,
	Vincent Chen

On Wed, 22 Sep 2021 08:11:44 +0300
nikita.shubin@maquefel.me wrote:

> Hello Atish.
>  
> 10.09.2021, 22:28, "Atish Patra" <atish.patra@wdc.com>:
> 
> > The current perf implementation in RISC-V is not very useful as it
> > can not count any events other than cycle/instructions. Moreover,
> > perf record can not be used or the events can not be started or
> > stopped.
> > 
> > Remove the implementation now for a better platform driver in future
> > that will implement most of the missing functionality.
> Your v3 version still breaks the build with CONFIG_BPF_SYSCALL
> enabled: 
> kernel/events/core.c: In function 'bpf_overflow_handler':
> kernel/events/core.c:9914:18: error: assignment to
> 'bpf_user_pt_regs_t *' {aka 'struct user_regs_struct *'} from
> incompatible pointer type 'struct pt_regs *'
> [-Werror=incompatible-pointer-types] 9914 |         ctx.regs =
> perf_arch_bpf_user_pt_regs(regs); |                  ^ 

Sorry for the noise.

Everything complies fine - i mistaken and applied older version again. 

> Yours,
> Nikita Shubin.
> 


^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 01/10] RISC-V: Remove the current perf implementation
@ 2021-09-22  5:25       ` Nikita Shubin
  0 siblings, 0 replies; 36+ messages in thread
From: Nikita Shubin @ 2021-09-22  5:25 UTC (permalink / raw)
  To: Atish Patra, linux-kernel
  Cc: Alexander Shishkin, Anup Patel, Ard Biesheuvel, Darrick J. Wong,
	devicetree, Guo Ren, Heinrich Schuchardt, Jiri Olsa, John Garry,
	Jonathan Corbet, linux-doc, linux-perf-users, linux-riscv,
	Nick Kossifidis, Palmer Dabbelt, Paul Walmsley, Rob Herring,
	Vincent Chen

On Wed, 22 Sep 2021 08:11:44 +0300
nikita.shubin@maquefel.me wrote:

> Hello Atish.
>  
> 10.09.2021, 22:28, "Atish Patra" <atish.patra@wdc.com>:
> 
> > The current perf implementation in RISC-V is not very useful as it
> > can not count any events other than cycle/instructions. Moreover,
> > perf record can not be used or the events can not be started or
> > stopped.
> > 
> > Remove the implementation now for a better platform driver in future
> > that will implement most of the missing functionality.
> Your v3 version still breaks the build with CONFIG_BPF_SYSCALL
> enabled: 
> kernel/events/core.c: In function 'bpf_overflow_handler':
> kernel/events/core.c:9914:18: error: assignment to
> 'bpf_user_pt_regs_t *' {aka 'struct user_regs_struct *'} from
> incompatible pointer type 'struct pt_regs *'
> [-Werror=incompatible-pointer-types] 9914 |         ctx.regs =
> perf_arch_bpf_user_pt_regs(regs); |                  ^ 

Sorry for the noise.

Everything complies fine - i mistaken and applied older version again. 

> Yours,
> Nikita Shubin.
> 


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
  2021-09-10 19:27 ` Atish Patra
@ 2021-10-04 18:20   ` Palmer Dabbelt
  -1 siblings, 0 replies; 36+ messages in thread
From: Palmer Dabbelt @ 2021-10-04 18:20 UTC (permalink / raw)
  To: Atish Patra
  Cc: linux-kernel, Atish Patra, alexander.shishkin, Anup Patel, ardb,
	djwong, devicetree, guoren, xypron.glpk, jolsa, john.garry,
	corbet, linux-doc, linux-perf-users, linux-riscv, mick,
	Paul Walmsley, robh+dt, vincent.chen

On Fri, 10 Sep 2021 12:27:47 PDT (-0700), Atish Patra wrote:
> This series adds improved perf support for RISC-V based system using
> SBI PMU extension[1] and Sscofpmf extension[2]. The SBI PMU extension allows

Last we talked the SBI-0.3 stuff was in an uncertain state and I'm not 
sure we ever got to a point of agreement there.  I've decided to just 
stop worrying about the state of extensions, so if you guys want the 
SBI-0.3 stuff merged then just go say it's frozen and that'll be good 
enough for me.

> the kernel to program the counters for different events and start/stop counters
> while the sscofpmf extension allows the counter overflow interrupt and privilege
> mode filtering. An hardware platform can leverage SBI PMU extension without
> the sscofpmf extension if it supports mcountinhibit and mcounteren. However,
> the reverse is not true. With both of these extension enabled, a platform can
> take advantage of all both event counting and sampling using perf tool.
>
> This series introduces a platform perf driver instead of a existing arch
> specific implementation. The new perf implementation has adopted a modular
> approach where most of the generic event handling is done in the core library
> while individual PMUs need to only implement necessary features specific to
> the PMU. This is easily extensible and any future RISC-V PMU implementation
> can leverage this. Currently, SBI PMU driver & legacy PMU driver are implemented
> as a part of this series.
>
> The legacy driver tries to reimplement the existing minimal perf under a new
> config to maintain backward compatibility. This implementation only allows
> monitoring of always running cycle/instruction counters. Moreover, they can
> not be started or stopped. In general, this is very limited and not very useful.
> That's why, I am not very keen to carry the support into the new driver.
> However, I don't want to break perf for any existing hardware platforms.
> If nobody really uses perf currently, I will be happy to drop PATCH 4.
>
> This series has been tested in Qemu on both RV64 & RV32. Qemu[5] & OpenSBI [3]
> patches are required to test it. Qemu changes are not backward compatible.
> That means, you can not use perf anymore on older Qemu versions with latest
> OpenSBI and/or Kernel. However, newer kernel will just use legacy pmu driver if
> old OpenSBI is detected or hardware doesn't implement mcountinhibit.
>
> Here is an output of perf stat/report while running hackbench with OpenSBI & Linux
> kernel patches applied [3].
>
> Perf stat:
> =========
>
> [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e r8000000000000007
> -e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e branch-misses
> -e cache-misses -e dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses
> -e cycles -e instructions ./hackbench -pipe 15 process
> Running with 15*40 (== 600) tasks.
> Time: 6.578
>
>  Performance counter stats for './hackbench -pipe 15 process':
>
>              6,491      r8000000000000005      (52.59%) --> SBI_PMU_FW_SET_TIMER
>             20,433      r8000000000000007      (60.74%) --> SBI_PMU_FW_IPI_RECVD
>             21,271      r8000000000000006      (68.71%) --> SBI_PMU_FW_IPI_SENT
>                  0      r0000000000020002      (76.55%)
>      <not counted>      r0000000000020004      (0.00%)
>      <not counted>      branch-misses          (0.00%)
>      <not counted>      cache-misses           (0.00%)
>         57,537,853      dTLB-load-misses       (9.49%)
>          2,821,147      dTLB-store-misses      (18.64%)
>         52,928,130      iTLB-load-misses       (27.53%)
>     89,521,791,110      cycles                 (36.08%)
>     90,678,132,464      instructions #    1.01  insn per cycle (44.44%)
>
>        6.975908032 seconds time elapsed
>
>        3.130950000 seconds user
>       24.353310000 seconds sys
>
> The patches can also be found in the github[4].
>
> Perf record:
> ============
> [root@fedora-riscv riscv]# perf record -e cycles -e instructions -e \
> dTLB-load-misses -e dTLB-store-misses -c 1000 ./hackbench -pipe 15 process 15
> Running with 15*40 (== 600) tasks.
> Time: 1.238
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.106 MB perf.data (1020 samples) ]
>
> [root@fedora-riscv riscv]# perf report
> Available samples
> 372 cycles                                                                     ◆
> 372 instructions                                                               ▒
> 262 dTLB-load-misses                                                           ▒
> 14 dTLB-store-misses
>
> The patches can also be found in the github[4].
>
> [1] https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
> [2] https://drive.google.com/file/d/171j4jFjIkKdj5LWcExphq4xG_2sihbfd/edit
> [3] https://github.com/atishp04/opensbi/tree/pmu_sscofpmf
> [4] https://github.com/atishp04/linux/tree/riscv_pmu_v3
> [5] https://github.com/atishp04/qemu/tree/riscv_pmu_v2
>
> Changes from v3->v4:
> 1. Added interrupt overflow support.
> 2. Cleaned up legacy driver initialization.
> 3. Supports perf record now.
> 4. Added the DT binding and maintainers file.
> 5. Changed cpu hotplug notifier to be multi-state.
> 6. OpenSBI doesn't disable cycle/instret counter during boot. Update the
>    perf code to disable all the counter during the boot.
>
> Changes from v1->v2
> 1. Implemented the latest SBI PMU extension specification.
> 2. The core platform driver was changed to operate as a library while only
>    sbi based PMU is built as a driver. The legacy one is just a fallback if
>    SBI PMU extension is not available.
>
> Atish Patra (10):
> RISC-V: Remove the current perf implementation
> RISC-V: Add CSR encodings for all HPMCOUNTERS
> RISC-V: Add a perf core library for pmu drivers
> RISC-V: Add a simple platform driver for RISC-V legacy perf
> RISC-V: Add RISC-V SBI PMU extension definitions
> dt-binding: pmu: Add RISC-V PMU DT bindings
> RISC-V: Add perf platform driver based on SBI PMU extension
> RISC-V: Add interrupt support for perf
> Documentation: riscv: Remove the old documentation
> MAINTAINERS: Add entry for RISC-V PMU drivers
>
> .../devicetree/bindings/perf/riscv,pmu.yaml   |  51 ++
> Documentation/riscv/pmu.rst                   | 255 ------
> MAINTAINERS                                   |  10 +
> arch/riscv/Kconfig                            |  13 -
> arch/riscv/include/asm/csr.h                  |  66 +-
> arch/riscv/include/asm/perf_event.h           |  72 --
> arch/riscv/include/asm/sbi.h                  |  97 +++
> arch/riscv/kernel/Makefile                    |   1 -
> arch/riscv/kernel/perf_event.c                | 485 ------------
> drivers/perf/Kconfig                          |  25 +
> drivers/perf/Makefile                         |   5 +
> drivers/perf/riscv_pmu.c                      | 331 ++++++++
> drivers/perf/riscv_pmu_legacy.c               | 143 ++++
> drivers/perf/riscv_pmu_sbi.c                  | 731 ++++++++++++++++++
> include/linux/cpuhotplug.h                    |   1 +
> include/linux/perf/riscv_pmu.h                |  69 ++
> 16 files changed, 1528 insertions(+), 827 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> delete mode 100644 Documentation/riscv/pmu.rst
> delete mode 100644 arch/riscv/kernel/perf_event.c
> create mode 100644 drivers/perf/riscv_pmu.c
> create mode 100644 drivers/perf/riscv_pmu_legacy.c
> create mode 100644 drivers/perf/riscv_pmu_sbi.c
> create mode 100644 include/linux/perf/riscv_pmu.h

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
@ 2021-10-04 18:20   ` Palmer Dabbelt
  0 siblings, 0 replies; 36+ messages in thread
From: Palmer Dabbelt @ 2021-10-04 18:20 UTC (permalink / raw)
  To: Atish Patra
  Cc: linux-kernel, Atish Patra, alexander.shishkin, Anup Patel, ardb,
	djwong, devicetree, guoren, xypron.glpk, jolsa, john.garry,
	corbet, linux-doc, linux-perf-users, linux-riscv, mick,
	Paul Walmsley, robh+dt, vincent.chen

On Fri, 10 Sep 2021 12:27:47 PDT (-0700), Atish Patra wrote:
> This series adds improved perf support for RISC-V based system using
> SBI PMU extension[1] and Sscofpmf extension[2]. The SBI PMU extension allows

Last we talked the SBI-0.3 stuff was in an uncertain state and I'm not 
sure we ever got to a point of agreement there.  I've decided to just 
stop worrying about the state of extensions, so if you guys want the 
SBI-0.3 stuff merged then just go say it's frozen and that'll be good 
enough for me.

> the kernel to program the counters for different events and start/stop counters
> while the sscofpmf extension allows the counter overflow interrupt and privilege
> mode filtering. An hardware platform can leverage SBI PMU extension without
> the sscofpmf extension if it supports mcountinhibit and mcounteren. However,
> the reverse is not true. With both of these extension enabled, a platform can
> take advantage of all both event counting and sampling using perf tool.
>
> This series introduces a platform perf driver instead of a existing arch
> specific implementation. The new perf implementation has adopted a modular
> approach where most of the generic event handling is done in the core library
> while individual PMUs need to only implement necessary features specific to
> the PMU. This is easily extensible and any future RISC-V PMU implementation
> can leverage this. Currently, SBI PMU driver & legacy PMU driver are implemented
> as a part of this series.
>
> The legacy driver tries to reimplement the existing minimal perf under a new
> config to maintain backward compatibility. This implementation only allows
> monitoring of always running cycle/instruction counters. Moreover, they can
> not be started or stopped. In general, this is very limited and not very useful.
> That's why, I am not very keen to carry the support into the new driver.
> However, I don't want to break perf for any existing hardware platforms.
> If nobody really uses perf currently, I will be happy to drop PATCH 4.
>
> This series has been tested in Qemu on both RV64 & RV32. Qemu[5] & OpenSBI [3]
> patches are required to test it. Qemu changes are not backward compatible.
> That means, you can not use perf anymore on older Qemu versions with latest
> OpenSBI and/or Kernel. However, newer kernel will just use legacy pmu driver if
> old OpenSBI is detected or hardware doesn't implement mcountinhibit.
>
> Here is an output of perf stat/report while running hackbench with OpenSBI & Linux
> kernel patches applied [3].
>
> Perf stat:
> =========
>
> [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e r8000000000000007
> -e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e branch-misses
> -e cache-misses -e dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses
> -e cycles -e instructions ./hackbench -pipe 15 process
> Running with 15*40 (== 600) tasks.
> Time: 6.578
>
>  Performance counter stats for './hackbench -pipe 15 process':
>
>              6,491      r8000000000000005      (52.59%) --> SBI_PMU_FW_SET_TIMER
>             20,433      r8000000000000007      (60.74%) --> SBI_PMU_FW_IPI_RECVD
>             21,271      r8000000000000006      (68.71%) --> SBI_PMU_FW_IPI_SENT
>                  0      r0000000000020002      (76.55%)
>      <not counted>      r0000000000020004      (0.00%)
>      <not counted>      branch-misses          (0.00%)
>      <not counted>      cache-misses           (0.00%)
>         57,537,853      dTLB-load-misses       (9.49%)
>          2,821,147      dTLB-store-misses      (18.64%)
>         52,928,130      iTLB-load-misses       (27.53%)
>     89,521,791,110      cycles                 (36.08%)
>     90,678,132,464      instructions #    1.01  insn per cycle (44.44%)
>
>        6.975908032 seconds time elapsed
>
>        3.130950000 seconds user
>       24.353310000 seconds sys
>
> The patches can also be found in the github[4].
>
> Perf record:
> ============
> [root@fedora-riscv riscv]# perf record -e cycles -e instructions -e \
> dTLB-load-misses -e dTLB-store-misses -c 1000 ./hackbench -pipe 15 process 15
> Running with 15*40 (== 600) tasks.
> Time: 1.238
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.106 MB perf.data (1020 samples) ]
>
> [root@fedora-riscv riscv]# perf report
> Available samples
> 372 cycles                                                                     ◆
> 372 instructions                                                               ▒
> 262 dTLB-load-misses                                                           ▒
> 14 dTLB-store-misses
>
> The patches can also be found in the github[4].
>
> [1] https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
> [2] https://drive.google.com/file/d/171j4jFjIkKdj5LWcExphq4xG_2sihbfd/edit
> [3] https://github.com/atishp04/opensbi/tree/pmu_sscofpmf
> [4] https://github.com/atishp04/linux/tree/riscv_pmu_v3
> [5] https://github.com/atishp04/qemu/tree/riscv_pmu_v2
>
> Changes from v3->v4:
> 1. Added interrupt overflow support.
> 2. Cleaned up legacy driver initialization.
> 3. Supports perf record now.
> 4. Added the DT binding and maintainers file.
> 5. Changed cpu hotplug notifier to be multi-state.
> 6. OpenSBI doesn't disable cycle/instret counter during boot. Update the
>    perf code to disable all the counter during the boot.
>
> Changes from v1->v2
> 1. Implemented the latest SBI PMU extension specification.
> 2. The core platform driver was changed to operate as a library while only
>    sbi based PMU is built as a driver. The legacy one is just a fallback if
>    SBI PMU extension is not available.
>
> Atish Patra (10):
> RISC-V: Remove the current perf implementation
> RISC-V: Add CSR encodings for all HPMCOUNTERS
> RISC-V: Add a perf core library for pmu drivers
> RISC-V: Add a simple platform driver for RISC-V legacy perf
> RISC-V: Add RISC-V SBI PMU extension definitions
> dt-binding: pmu: Add RISC-V PMU DT bindings
> RISC-V: Add perf platform driver based on SBI PMU extension
> RISC-V: Add interrupt support for perf
> Documentation: riscv: Remove the old documentation
> MAINTAINERS: Add entry for RISC-V PMU drivers
>
> .../devicetree/bindings/perf/riscv,pmu.yaml   |  51 ++
> Documentation/riscv/pmu.rst                   | 255 ------
> MAINTAINERS                                   |  10 +
> arch/riscv/Kconfig                            |  13 -
> arch/riscv/include/asm/csr.h                  |  66 +-
> arch/riscv/include/asm/perf_event.h           |  72 --
> arch/riscv/include/asm/sbi.h                  |  97 +++
> arch/riscv/kernel/Makefile                    |   1 -
> arch/riscv/kernel/perf_event.c                | 485 ------------
> drivers/perf/Kconfig                          |  25 +
> drivers/perf/Makefile                         |   5 +
> drivers/perf/riscv_pmu.c                      | 331 ++++++++
> drivers/perf/riscv_pmu_legacy.c               | 143 ++++
> drivers/perf/riscv_pmu_sbi.c                  | 731 ++++++++++++++++++
> include/linux/cpuhotplug.h                    |   1 +
> include/linux/perf/riscv_pmu.h                |  69 ++
> 16 files changed, 1528 insertions(+), 827 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> delete mode 100644 Documentation/riscv/pmu.rst
> delete mode 100644 arch/riscv/kernel/perf_event.c
> create mode 100644 drivers/perf/riscv_pmu.c
> create mode 100644 drivers/perf/riscv_pmu_legacy.c
> create mode 100644 drivers/perf/riscv_pmu_sbi.c
> create mode 100644 include/linux/perf/riscv_pmu.h

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
  2021-09-10 19:27 ` Atish Patra
@ 2021-10-05  9:17   ` Nikita Shubin
  -1 siblings, 0 replies; 36+ messages in thread
From: Nikita Shubin @ 2021-10-05  9:17 UTC (permalink / raw)
  To: Atish Patra
  Cc: linux-kernel, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

On Fri, 10 Sep 2021 12:27:47 -0700
Atish Patra <atish.patra@wdc.com> wrote:

Hello Atish,

> Perf stat:
> =========
> 
> [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e
> r8000000000000007 -e r8000000000000006 -e r0000000000020002 -e
> r0000000000020004 -e branch-misses -e cache-misses -e
> dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses -e cycles
> -e instructions ./hackbench -pipe 15 process Running with 15*40 (==
> 600) tasks. Time: 6.578
> 
>  Performance counter stats for './hackbench -pipe 15 process':
> 
>              6,491      r8000000000000005      (52.59%) -->
> SBI_PMU_FW_SET_TIMER 20,433      r8000000000000007      (60.74%) -->
> SBI_PMU_FW_IPI_RECVD 21,271      r8000000000000006      (68.71%) -->
> SBI_PMU_FW_IPI_SENT 0      r0000000000020002      (76.55%)
>      <not counted>      r0000000000020004      (0.00%)
>      <not counted>      branch-misses          (0.00%)
>      <not counted>      cache-misses           (0.00%)
>         57,537,853      dTLB-load-misses       (9.49%)
>          2,821,147      dTLB-store-misses      (18.64%)
>         52,928,130      iTLB-load-misses       (27.53%)
>     89,521,791,110      cycles                 (36.08%)
>     90,678,132,464      instructions #    1.01  insn per cycle
> (44.44%)
> 
>        6.975908032 seconds time elapsed
> 
>        3.130950000 seconds user
>       24.353310000 seconds sys
> 

Tested your patch series with qemu and got results as expected:

perf stat -e r8000000000000005 -e r8000000000000007 \
-e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e
branch-misses \ -e cache-misses -e dTLB-load-misses -e
dTLB-store-misses -e iTLB-load-misses \ -e cycles -e instructions
./hackbench -pipe 15 process

Running with 15*40 (== 600) tasks.nch -pipe 15 process
Time: 20.027

 Performance counter stats for './hackbench -pipe 15 process':

              4896      r8000000000000005
                            (53.34%) 0      r8000000000000007
                                                (61.20%) 0
              r8000000000000006
                  (68.88%) 0      r0000000000020002
                                      (76.53%) <not counted>
              r0000000000020004
                  (0.00%) <not counted>      branch-misses
                                                 (0.00%) <not counted>
                  cache-misses
                      (0.00%) 48414917      dTLB-load-misses
                                                (9.87%) 2427413
              dTLB-store-misses
                  (19.43%) 46958092      iTLB-load-misses
                                             (28.58%) 69245163600
              cycles
                  (37.09%) 70334279943      instructions              #
                 1.02  insn per cycle           (45.24%)

      20.895871900 seconds time elapsed

       2.724942000 seconds user
      18.126277000 seconds sys

perf top/record also works.

Tested-by: Nikita Shubin <n.shubin@yadro.com>

Yours,
Nikita Shubin



_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
@ 2021-10-05  9:17   ` Nikita Shubin
  0 siblings, 0 replies; 36+ messages in thread
From: Nikita Shubin @ 2021-10-05  9:17 UTC (permalink / raw)
  To: Atish Patra
  Cc: linux-kernel, Alexander Shishkin, Anup Patel, Ard Biesheuvel,
	Darrick J. Wong, devicetree, Guo Ren, Heinrich Schuchardt,
	Jiri Olsa, John Garry, Jonathan Corbet, linux-doc,
	linux-perf-users, linux-riscv, Nick Kossifidis, Palmer Dabbelt,
	Paul Walmsley, Rob Herring, Vincent Chen

On Fri, 10 Sep 2021 12:27:47 -0700
Atish Patra <atish.patra@wdc.com> wrote:

Hello Atish,

> Perf stat:
> =========
> 
> [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e
> r8000000000000007 -e r8000000000000006 -e r0000000000020002 -e
> r0000000000020004 -e branch-misses -e cache-misses -e
> dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses -e cycles
> -e instructions ./hackbench -pipe 15 process Running with 15*40 (==
> 600) tasks. Time: 6.578
> 
>  Performance counter stats for './hackbench -pipe 15 process':
> 
>              6,491      r8000000000000005      (52.59%) -->
> SBI_PMU_FW_SET_TIMER 20,433      r8000000000000007      (60.74%) -->
> SBI_PMU_FW_IPI_RECVD 21,271      r8000000000000006      (68.71%) -->
> SBI_PMU_FW_IPI_SENT 0      r0000000000020002      (76.55%)
>      <not counted>      r0000000000020004      (0.00%)
>      <not counted>      branch-misses          (0.00%)
>      <not counted>      cache-misses           (0.00%)
>         57,537,853      dTLB-load-misses       (9.49%)
>          2,821,147      dTLB-store-misses      (18.64%)
>         52,928,130      iTLB-load-misses       (27.53%)
>     89,521,791,110      cycles                 (36.08%)
>     90,678,132,464      instructions #    1.01  insn per cycle
> (44.44%)
> 
>        6.975908032 seconds time elapsed
> 
>        3.130950000 seconds user
>       24.353310000 seconds sys
> 

Tested your patch series with qemu and got results as expected:

perf stat -e r8000000000000005 -e r8000000000000007 \
-e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e
branch-misses \ -e cache-misses -e dTLB-load-misses -e
dTLB-store-misses -e iTLB-load-misses \ -e cycles -e instructions
./hackbench -pipe 15 process

Running with 15*40 (== 600) tasks.nch -pipe 15 process
Time: 20.027

 Performance counter stats for './hackbench -pipe 15 process':

              4896      r8000000000000005
                            (53.34%) 0      r8000000000000007
                                                (61.20%) 0
              r8000000000000006
                  (68.88%) 0      r0000000000020002
                                      (76.53%) <not counted>
              r0000000000020004
                  (0.00%) <not counted>      branch-misses
                                                 (0.00%) <not counted>
                  cache-misses
                      (0.00%) 48414917      dTLB-load-misses
                                                (9.87%) 2427413
              dTLB-store-misses
                  (19.43%) 46958092      iTLB-load-misses
                                             (28.58%) 69245163600
              cycles
                  (37.09%) 70334279943      instructions              #
                 1.02  insn per cycle           (45.24%)

      20.895871900 seconds time elapsed

       2.724942000 seconds user
      18.126277000 seconds sys

perf top/record also works.

Tested-by: Nikita Shubin <n.shubin@yadro.com>

Yours,
Nikita Shubin



^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
  2021-10-04 18:20   ` Palmer Dabbelt
@ 2021-10-06 18:27     ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-10-06 18:27 UTC (permalink / raw)
  To: Palmer Dabbelt
  Cc: Atish Patra, linux-kernel@vger.kernel.org List,
	alexander.shishkin, Anup Patel, Ard Biesheuvel, djwong,
	devicetree, Guo Ren, Heinrich Schuchardt, jolsa, john.garry,
	Jonathan Corbet, Linux Doc Mailing List, linux-perf-users,
	linux-riscv, Nick Kossifidis, Paul Walmsley, Rob Herring,
	Vincent Chen

On Mon, Oct 4, 2021 at 11:21 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>
> On Fri, 10 Sep 2021 12:27:47 PDT (-0700), Atish Patra wrote:
> > This series adds improved perf support for RISC-V based system using
> > SBI PMU extension[1] and Sscofpmf extension[2]. The SBI PMU extension allows
>
> Last we talked the SBI-0.3 stuff was in an uncertain state and I'm not
> sure we ever got to a point of agreement there.  I've decided to just
> stop worrying about the state of extensions, so if you guys want the
> SBI-0.3 stuff merged then just go say it's frozen and that'll be good
> enough for me.
>

Now, there is a freeze/ratification process[1] and DoD policy[2] in
place for non-ISA specifications.
Thus, we are following the process to get it approved by the TSC.

[1] https://docs.google.com/document/d/1KkTmcPuor3DipS2JIUeR3DJhIN5i51bj3VF-L7QQShw/edit#heading=h.hym1mtuc89he
[2] https://docs.google.com/document/d/1A4gZlXXFT_a9QGzlc9g2RHg853e6ZDB59coANEYN3Aw/edit

There will be another release v0.3.1 which will be approved by the TSC
and will be called frozen officially.
There are no functional changes between v0.3 and v0.3.1. It is created
just to follow the newly defined process.
I will update the mailing list as soon as it is submitted for approval.

> > the kernel to program the counters for different events and start/stop counters
> > while the sscofpmf extension allows the counter overflow interrupt and privilege
> > mode filtering. An hardware platform can leverage SBI PMU extension without
> > the sscofpmf extension if it supports mcountinhibit and mcounteren. However,
> > the reverse is not true. With both of these extension enabled, a platform can
> > take advantage of all both event counting and sampling using perf tool.
> >
> > This series introduces a platform perf driver instead of a existing arch
> > specific implementation. The new perf implementation has adopted a modular
> > approach where most of the generic event handling is done in the core library
> > while individual PMUs need to only implement necessary features specific to
> > the PMU. This is easily extensible and any future RISC-V PMU implementation
> > can leverage this. Currently, SBI PMU driver & legacy PMU driver are implemented
> > as a part of this series.
> >
> > The legacy driver tries to reimplement the existing minimal perf under a new
> > config to maintain backward compatibility. This implementation only allows
> > monitoring of always running cycle/instruction counters. Moreover, they can
> > not be started or stopped. In general, this is very limited and not very useful.
> > That's why, I am not very keen to carry the support into the new driver.
> > However, I don't want to break perf for any existing hardware platforms.
> > If nobody really uses perf currently, I will be happy to drop PATCH 4.
> >
> > This series has been tested in Qemu on both RV64 & RV32. Qemu[5] & OpenSBI [3]
> > patches are required to test it. Qemu changes are not backward compatible.
> > That means, you can not use perf anymore on older Qemu versions with latest
> > OpenSBI and/or Kernel. However, newer kernel will just use legacy pmu driver if
> > old OpenSBI is detected or hardware doesn't implement mcountinhibit.
> >
> > Here is an output of perf stat/report while running hackbench with OpenSBI & Linux
> > kernel patches applied [3].
> >
> > Perf stat:
> > =========
> >
> > [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e r8000000000000007
> > -e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e branch-misses
> > -e cache-misses -e dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses
> > -e cycles -e instructions ./hackbench -pipe 15 process
> > Running with 15*40 (== 600) tasks.
> > Time: 6.578
> >
> >  Performance counter stats for './hackbench -pipe 15 process':
> >
> >              6,491      r8000000000000005      (52.59%) --> SBI_PMU_FW_SET_TIMER
> >             20,433      r8000000000000007      (60.74%) --> SBI_PMU_FW_IPI_RECVD
> >             21,271      r8000000000000006      (68.71%) --> SBI_PMU_FW_IPI_SENT
> >                  0      r0000000000020002      (76.55%)
> >      <not counted>      r0000000000020004      (0.00%)
> >      <not counted>      branch-misses          (0.00%)
> >      <not counted>      cache-misses           (0.00%)
> >         57,537,853      dTLB-load-misses       (9.49%)
> >          2,821,147      dTLB-store-misses      (18.64%)
> >         52,928,130      iTLB-load-misses       (27.53%)
> >     89,521,791,110      cycles                 (36.08%)
> >     90,678,132,464      instructions #    1.01  insn per cycle (44.44%)
> >
> >        6.975908032 seconds time elapsed
> >
> >        3.130950000 seconds user
> >       24.353310000 seconds sys
> >
> > The patches can also be found in the github[4].
> >
> > Perf record:
> > ============
> > [root@fedora-riscv riscv]# perf record -e cycles -e instructions -e \
> > dTLB-load-misses -e dTLB-store-misses -c 1000 ./hackbench -pipe 15 process 15
> > Running with 15*40 (== 600) tasks.
> > Time: 1.238
> > [ perf record: Woken up 1 times to write data ]
> > [ perf record: Captured and wrote 0.106 MB perf.data (1020 samples) ]
> >
> > [root@fedora-riscv riscv]# perf report
> > Available samples
> > 372 cycles                                                                     ◆
> > 372 instructions                                                               ▒
> > 262 dTLB-load-misses                                                           ▒
> > 14 dTLB-store-misses
> >
> > The patches can also be found in the github[4].
> >
> > [1] https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
> > [2] https://drive.google.com/file/d/171j4jFjIkKdj5LWcExphq4xG_2sihbfd/edit
> > [3] https://github.com/atishp04/opensbi/tree/pmu_sscofpmf
> > [4] https://github.com/atishp04/linux/tree/riscv_pmu_v3
> > [5] https://github.com/atishp04/qemu/tree/riscv_pmu_v2
> >
> > Changes from v3->v4:
> > 1. Added interrupt overflow support.
> > 2. Cleaned up legacy driver initialization.
> > 3. Supports perf record now.
> > 4. Added the DT binding and maintainers file.
> > 5. Changed cpu hotplug notifier to be multi-state.
> > 6. OpenSBI doesn't disable cycle/instret counter during boot. Update the
> >    perf code to disable all the counter during the boot.
> >
> > Changes from v1->v2
> > 1. Implemented the latest SBI PMU extension specification.
> > 2. The core platform driver was changed to operate as a library while only
> >    sbi based PMU is built as a driver. The legacy one is just a fallback if
> >    SBI PMU extension is not available.
> >
> > Atish Patra (10):
> > RISC-V: Remove the current perf implementation
> > RISC-V: Add CSR encodings for all HPMCOUNTERS
> > RISC-V: Add a perf core library for pmu drivers
> > RISC-V: Add a simple platform driver for RISC-V legacy perf
> > RISC-V: Add RISC-V SBI PMU extension definitions
> > dt-binding: pmu: Add RISC-V PMU DT bindings
> > RISC-V: Add perf platform driver based on SBI PMU extension
> > RISC-V: Add interrupt support for perf
> > Documentation: riscv: Remove the old documentation
> > MAINTAINERS: Add entry for RISC-V PMU drivers
> >
> > .../devicetree/bindings/perf/riscv,pmu.yaml   |  51 ++
> > Documentation/riscv/pmu.rst                   | 255 ------
> > MAINTAINERS                                   |  10 +
> > arch/riscv/Kconfig                            |  13 -
> > arch/riscv/include/asm/csr.h                  |  66 +-
> > arch/riscv/include/asm/perf_event.h           |  72 --
> > arch/riscv/include/asm/sbi.h                  |  97 +++
> > arch/riscv/kernel/Makefile                    |   1 -
> > arch/riscv/kernel/perf_event.c                | 485 ------------
> > drivers/perf/Kconfig                          |  25 +
> > drivers/perf/Makefile                         |   5 +
> > drivers/perf/riscv_pmu.c                      | 331 ++++++++
> > drivers/perf/riscv_pmu_legacy.c               | 143 ++++
> > drivers/perf/riscv_pmu_sbi.c                  | 731 ++++++++++++++++++
> > include/linux/cpuhotplug.h                    |   1 +
> > include/linux/perf/riscv_pmu.h                |  69 ++
> > 16 files changed, 1528 insertions(+), 827 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> > delete mode 100644 Documentation/riscv/pmu.rst
> > delete mode 100644 arch/riscv/kernel/perf_event.c
> > create mode 100644 drivers/perf/riscv_pmu.c
> > create mode 100644 drivers/perf/riscv_pmu_legacy.c
> > create mode 100644 drivers/perf/riscv_pmu_sbi.c
> > create mode 100644 include/linux/perf/riscv_pmu.h
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



--
Regards,
Atish

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
@ 2021-10-06 18:27     ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-10-06 18:27 UTC (permalink / raw)
  To: Palmer Dabbelt
  Cc: Atish Patra, linux-kernel@vger.kernel.org List,
	alexander.shishkin, Anup Patel, Ard Biesheuvel, djwong,
	devicetree, Guo Ren, Heinrich Schuchardt, jolsa, john.garry,
	Jonathan Corbet, Linux Doc Mailing List, linux-perf-users,
	linux-riscv, Nick Kossifidis, Paul Walmsley, Rob Herring,
	Vincent Chen

On Mon, Oct 4, 2021 at 11:21 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>
> On Fri, 10 Sep 2021 12:27:47 PDT (-0700), Atish Patra wrote:
> > This series adds improved perf support for RISC-V based system using
> > SBI PMU extension[1] and Sscofpmf extension[2]. The SBI PMU extension allows
>
> Last we talked the SBI-0.3 stuff was in an uncertain state and I'm not
> sure we ever got to a point of agreement there.  I've decided to just
> stop worrying about the state of extensions, so if you guys want the
> SBI-0.3 stuff merged then just go say it's frozen and that'll be good
> enough for me.
>

Now, there is a freeze/ratification process[1] and DoD policy[2] in
place for non-ISA specifications.
Thus, we are following the process to get it approved by the TSC.

[1] https://docs.google.com/document/d/1KkTmcPuor3DipS2JIUeR3DJhIN5i51bj3VF-L7QQShw/edit#heading=h.hym1mtuc89he
[2] https://docs.google.com/document/d/1A4gZlXXFT_a9QGzlc9g2RHg853e6ZDB59coANEYN3Aw/edit

There will be another release v0.3.1 which will be approved by the TSC
and will be called frozen officially.
There are no functional changes between v0.3 and v0.3.1. It is created
just to follow the newly defined process.
I will update the mailing list as soon as it is submitted for approval.

> > the kernel to program the counters for different events and start/stop counters
> > while the sscofpmf extension allows the counter overflow interrupt and privilege
> > mode filtering. An hardware platform can leverage SBI PMU extension without
> > the sscofpmf extension if it supports mcountinhibit and mcounteren. However,
> > the reverse is not true. With both of these extension enabled, a platform can
> > take advantage of all both event counting and sampling using perf tool.
> >
> > This series introduces a platform perf driver instead of a existing arch
> > specific implementation. The new perf implementation has adopted a modular
> > approach where most of the generic event handling is done in the core library
> > while individual PMUs need to only implement necessary features specific to
> > the PMU. This is easily extensible and any future RISC-V PMU implementation
> > can leverage this. Currently, SBI PMU driver & legacy PMU driver are implemented
> > as a part of this series.
> >
> > The legacy driver tries to reimplement the existing minimal perf under a new
> > config to maintain backward compatibility. This implementation only allows
> > monitoring of always running cycle/instruction counters. Moreover, they can
> > not be started or stopped. In general, this is very limited and not very useful.
> > That's why, I am not very keen to carry the support into the new driver.
> > However, I don't want to break perf for any existing hardware platforms.
> > If nobody really uses perf currently, I will be happy to drop PATCH 4.
> >
> > This series has been tested in Qemu on both RV64 & RV32. Qemu[5] & OpenSBI [3]
> > patches are required to test it. Qemu changes are not backward compatible.
> > That means, you can not use perf anymore on older Qemu versions with latest
> > OpenSBI and/or Kernel. However, newer kernel will just use legacy pmu driver if
> > old OpenSBI is detected or hardware doesn't implement mcountinhibit.
> >
> > Here is an output of perf stat/report while running hackbench with OpenSBI & Linux
> > kernel patches applied [3].
> >
> > Perf stat:
> > =========
> >
> > [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e r8000000000000007
> > -e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e branch-misses
> > -e cache-misses -e dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses
> > -e cycles -e instructions ./hackbench -pipe 15 process
> > Running with 15*40 (== 600) tasks.
> > Time: 6.578
> >
> >  Performance counter stats for './hackbench -pipe 15 process':
> >
> >              6,491      r8000000000000005      (52.59%) --> SBI_PMU_FW_SET_TIMER
> >             20,433      r8000000000000007      (60.74%) --> SBI_PMU_FW_IPI_RECVD
> >             21,271      r8000000000000006      (68.71%) --> SBI_PMU_FW_IPI_SENT
> >                  0      r0000000000020002      (76.55%)
> >      <not counted>      r0000000000020004      (0.00%)
> >      <not counted>      branch-misses          (0.00%)
> >      <not counted>      cache-misses           (0.00%)
> >         57,537,853      dTLB-load-misses       (9.49%)
> >          2,821,147      dTLB-store-misses      (18.64%)
> >         52,928,130      iTLB-load-misses       (27.53%)
> >     89,521,791,110      cycles                 (36.08%)
> >     90,678,132,464      instructions #    1.01  insn per cycle (44.44%)
> >
> >        6.975908032 seconds time elapsed
> >
> >        3.130950000 seconds user
> >       24.353310000 seconds sys
> >
> > The patches can also be found in the github[4].
> >
> > Perf record:
> > ============
> > [root@fedora-riscv riscv]# perf record -e cycles -e instructions -e \
> > dTLB-load-misses -e dTLB-store-misses -c 1000 ./hackbench -pipe 15 process 15
> > Running with 15*40 (== 600) tasks.
> > Time: 1.238
> > [ perf record: Woken up 1 times to write data ]
> > [ perf record: Captured and wrote 0.106 MB perf.data (1020 samples) ]
> >
> > [root@fedora-riscv riscv]# perf report
> > Available samples
> > 372 cycles                                                                     ◆
> > 372 instructions                                                               ▒
> > 262 dTLB-load-misses                                                           ▒
> > 14 dTLB-store-misses
> >
> > The patches can also be found in the github[4].
> >
> > [1] https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
> > [2] https://drive.google.com/file/d/171j4jFjIkKdj5LWcExphq4xG_2sihbfd/edit
> > [3] https://github.com/atishp04/opensbi/tree/pmu_sscofpmf
> > [4] https://github.com/atishp04/linux/tree/riscv_pmu_v3
> > [5] https://github.com/atishp04/qemu/tree/riscv_pmu_v2
> >
> > Changes from v3->v4:
> > 1. Added interrupt overflow support.
> > 2. Cleaned up legacy driver initialization.
> > 3. Supports perf record now.
> > 4. Added the DT binding and maintainers file.
> > 5. Changed cpu hotplug notifier to be multi-state.
> > 6. OpenSBI doesn't disable cycle/instret counter during boot. Update the
> >    perf code to disable all the counter during the boot.
> >
> > Changes from v1->v2
> > 1. Implemented the latest SBI PMU extension specification.
> > 2. The core platform driver was changed to operate as a library while only
> >    sbi based PMU is built as a driver. The legacy one is just a fallback if
> >    SBI PMU extension is not available.
> >
> > Atish Patra (10):
> > RISC-V: Remove the current perf implementation
> > RISC-V: Add CSR encodings for all HPMCOUNTERS
> > RISC-V: Add a perf core library for pmu drivers
> > RISC-V: Add a simple platform driver for RISC-V legacy perf
> > RISC-V: Add RISC-V SBI PMU extension definitions
> > dt-binding: pmu: Add RISC-V PMU DT bindings
> > RISC-V: Add perf platform driver based on SBI PMU extension
> > RISC-V: Add interrupt support for perf
> > Documentation: riscv: Remove the old documentation
> > MAINTAINERS: Add entry for RISC-V PMU drivers
> >
> > .../devicetree/bindings/perf/riscv,pmu.yaml   |  51 ++
> > Documentation/riscv/pmu.rst                   | 255 ------
> > MAINTAINERS                                   |  10 +
> > arch/riscv/Kconfig                            |  13 -
> > arch/riscv/include/asm/csr.h                  |  66 +-
> > arch/riscv/include/asm/perf_event.h           |  72 --
> > arch/riscv/include/asm/sbi.h                  |  97 +++
> > arch/riscv/kernel/Makefile                    |   1 -
> > arch/riscv/kernel/perf_event.c                | 485 ------------
> > drivers/perf/Kconfig                          |  25 +
> > drivers/perf/Makefile                         |   5 +
> > drivers/perf/riscv_pmu.c                      | 331 ++++++++
> > drivers/perf/riscv_pmu_legacy.c               | 143 ++++
> > drivers/perf/riscv_pmu_sbi.c                  | 731 ++++++++++++++++++
> > include/linux/cpuhotplug.h                    |   1 +
> > include/linux/perf/riscv_pmu.h                |  69 ++
> > 16 files changed, 1528 insertions(+), 827 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/perf/riscv,pmu.yaml
> > delete mode 100644 Documentation/riscv/pmu.rst
> > delete mode 100644 arch/riscv/kernel/perf_event.c
> > create mode 100644 drivers/perf/riscv_pmu.c
> > create mode 100644 drivers/perf/riscv_pmu_legacy.c
> > create mode 100644 drivers/perf/riscv_pmu_sbi.c
> > create mode 100644 include/linux/perf/riscv_pmu.h
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



--
Regards,
Atish

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
  2021-10-05  9:17   ` Nikita Shubin
@ 2021-10-06 18:28     ` Atish Patra
  -1 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-10-06 18:28 UTC (permalink / raw)
  To: Nikita Shubin
  Cc: Atish Patra, linux-kernel@vger.kernel.org List,
	Alexander Shishkin, Anup Patel, Ard Biesheuvel, Darrick J. Wong,
	devicetree, Guo Ren, Heinrich Schuchardt, Jiri Olsa, John Garry,
	Jonathan Corbet, Linux Doc Mailing List, linux-perf-users,
	linux-riscv, Nick Kossifidis, Palmer Dabbelt, Paul Walmsley,
	Rob Herring, Vincent Chen, Anish Khurana

On Tue, Oct 5, 2021 at 2:18 AM Nikita Shubin <nikita.shubin@maquefel.me> wrote:
>
> On Fri, 10 Sep 2021 12:27:47 -0700
> Atish Patra <atish.patra@wdc.com> wrote:
>
> Hello Atish,
>
> > Perf stat:
> > =========
> >
> > [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e
> > r8000000000000007 -e r8000000000000006 -e r0000000000020002 -e
> > r0000000000020004 -e branch-misses -e cache-misses -e
> > dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses -e cycles
> > -e instructions ./hackbench -pipe 15 process Running with 15*40 (==
> > 600) tasks. Time: 6.578
> >
> >  Performance counter stats for './hackbench -pipe 15 process':
> >
> >              6,491      r8000000000000005      (52.59%) -->
> > SBI_PMU_FW_SET_TIMER 20,433      r8000000000000007      (60.74%) -->
> > SBI_PMU_FW_IPI_RECVD 21,271      r8000000000000006      (68.71%) -->
> > SBI_PMU_FW_IPI_SENT 0      r0000000000020002      (76.55%)
> >      <not counted>      r0000000000020004      (0.00%)
> >      <not counted>      branch-misses          (0.00%)
> >      <not counted>      cache-misses           (0.00%)
> >         57,537,853      dTLB-load-misses       (9.49%)
> >          2,821,147      dTLB-store-misses      (18.64%)
> >         52,928,130      iTLB-load-misses       (27.53%)
> >     89,521,791,110      cycles                 (36.08%)
> >     90,678,132,464      instructions #    1.01  insn per cycle
> > (44.44%)
> >
> >        6.975908032 seconds time elapsed
> >
> >        3.130950000 seconds user
> >       24.353310000 seconds sys
> >
>
> Tested your patch series with qemu and got results as expected:
>
> perf stat -e r8000000000000005 -e r8000000000000007 \
> -e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e
> branch-misses \ -e cache-misses -e dTLB-load-misses -e
> dTLB-store-misses -e iTLB-load-misses \ -e cycles -e instructions
> ./hackbench -pipe 15 process
>
> Running with 15*40 (== 600) tasks.nch -pipe 15 process
> Time: 20.027
>
>  Performance counter stats for './hackbench -pipe 15 process':
>
>               4896      r8000000000000005
>                             (53.34%) 0      r8000000000000007
>                                                 (61.20%) 0
>               r8000000000000006
>                   (68.88%) 0      r0000000000020002
>                                       (76.53%) <not counted>
>               r0000000000020004
>                   (0.00%) <not counted>      branch-misses
>                                                  (0.00%) <not counted>
>                   cache-misses
>                       (0.00%) 48414917      dTLB-load-misses
>                                                 (9.87%) 2427413
>               dTLB-store-misses
>                   (19.43%) 46958092      iTLB-load-misses
>                                              (28.58%) 69245163600
>               cycles
>                   (37.09%) 70334279943      instructions              #
>                  1.02  insn per cycle           (45.24%)
>
>       20.895871900 seconds time elapsed
>
>        2.724942000 seconds user
>       18.126277000 seconds sys
>
> perf top/record also works.
>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
>

Thanks for the testing.

> Yours,
> Nikita Shubin
>
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



-- 
Regards,
Atish

^ permalink raw reply	[flat|nested] 36+ messages in thread
* Re: [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension
@ 2021-10-06 18:28     ` Atish Patra
  0 siblings, 0 replies; 36+ messages in thread
From: Atish Patra @ 2021-10-06 18:28 UTC (permalink / raw)
  To: Nikita Shubin
  Cc: Atish Patra, linux-kernel@vger.kernel.org List,
	Alexander Shishkin, Anup Patel, Ard Biesheuvel, Darrick J. Wong,
	devicetree, Guo Ren, Heinrich Schuchardt, Jiri Olsa, John Garry,
	Jonathan Corbet, Linux Doc Mailing List, linux-perf-users,
	linux-riscv, Nick Kossifidis, Palmer Dabbelt, Paul Walmsley,
	Rob Herring, Vincent Chen, Anish Khurana

On Tue, Oct 5, 2021 at 2:18 AM Nikita Shubin <nikita.shubin@maquefel.me> wrote:
>
> On Fri, 10 Sep 2021 12:27:47 -0700
> Atish Patra <atish.patra@wdc.com> wrote:
>
> Hello Atish,
>
> > Perf stat:
> > =========
> >
> > [root@fedora-riscv riscv]# perf stat -e r8000000000000005 -e
> > r8000000000000007 -e r8000000000000006 -e r0000000000020002 -e
> > r0000000000020004 -e branch-misses -e cache-misses -e
> > dTLB-load-misses -e dTLB-store-misses -e iTLB-load-misses -e cycles
> > -e instructions ./hackbench -pipe 15 process Running with 15*40 (==
> > 600) tasks. Time: 6.578
> >
> >  Performance counter stats for './hackbench -pipe 15 process':
> >
> >              6,491      r8000000000000005      (52.59%) -->
> > SBI_PMU_FW_SET_TIMER 20,433      r8000000000000007      (60.74%) -->
> > SBI_PMU_FW_IPI_RECVD 21,271      r8000000000000006      (68.71%) -->
> > SBI_PMU_FW_IPI_SENT 0      r0000000000020002      (76.55%)
> >      <not counted>      r0000000000020004      (0.00%)
> >      <not counted>      branch-misses          (0.00%)
> >      <not counted>      cache-misses           (0.00%)
> >         57,537,853      dTLB-load-misses       (9.49%)
> >          2,821,147      dTLB-store-misses      (18.64%)
> >         52,928,130      iTLB-load-misses       (27.53%)
> >     89,521,791,110      cycles                 (36.08%)
> >     90,678,132,464      instructions #    1.01  insn per cycle
> > (44.44%)
> >
> >        6.975908032 seconds time elapsed
> >
> >        3.130950000 seconds user
> >       24.353310000 seconds sys
> >
>
> Tested your patch series with qemu and got results as expected:
>
> perf stat -e r8000000000000005 -e r8000000000000007 \
> -e r8000000000000006 -e r0000000000020002 -e r0000000000020004 -e
> branch-misses \ -e cache-misses -e dTLB-load-misses -e
> dTLB-store-misses -e iTLB-load-misses \ -e cycles -e instructions
> ./hackbench -pipe 15 process
>
> Running with 15*40 (== 600) tasks.nch -pipe 15 process
> Time: 20.027
>
>  Performance counter stats for './hackbench -pipe 15 process':
>
>               4896      r8000000000000005
>                             (53.34%) 0      r8000000000000007
>                                                 (61.20%) 0
>               r8000000000000006
>                   (68.88%) 0      r0000000000020002
>                                       (76.53%) <not counted>
>               r0000000000020004
>                   (0.00%) <not counted>      branch-misses
>                                                  (0.00%) <not counted>
>                   cache-misses
>                       (0.00%) 48414917      dTLB-load-misses
>                                                 (9.87%) 2427413
>               dTLB-store-misses
>                   (19.43%) 46958092      iTLB-load-misses
>                                              (28.58%) 69245163600
>               cycles
>                   (37.09%) 70334279943      instructions              #
>                  1.02  insn per cycle           (45.24%)
>
>       20.895871900 seconds time elapsed
>
>        2.724942000 seconds user
>       18.126277000 seconds sys
>
> perf top/record also works.
>
> Tested-by: Nikita Shubin <n.shubin@yadro.com>
>

Thanks for the testing.

> Yours,
> Nikita Shubin
>
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



-- 
Regards,
Atish

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 36+ messages in thread
end of thread, other threads:[~2021-10-06 18:29 UTC | newest]

Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-10 19:27 [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension Atish Patra
2021-09-10 19:27 ` Atish Patra
2021-09-10 19:27 ` [v3 01/10] RISC-V: Remove the current perf implementation Atish Patra
2021-09-10 19:27   ` Atish Patra
     [not found]   ` <238571632287002@mail.yandex.ru>
2021-09-22  5:25     ` Nikita Shubin
2021-09-22  5:25       ` Nikita Shubin
2021-09-10 19:27 ` [v3 02/10] RISC-V: Add CSR encodings for all HPMCOUNTERS Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-10 19:27 ` [v3 03/10] RISC-V: Add a perf core library for pmu drivers Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-10 19:27 ` [v3 04/10] RISC-V: Add a simple platform driver for RISC-V legacy perf Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-10 19:27 ` [v3 05/10] RISC-V: Add RISC-V SBI PMU extension definitions Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-10 19:27 ` [v3 06/10] dt-binding: pmu: Add RISC-V PMU DT bindings Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-13 12:18   ` Rob Herring
2021-09-13 12:18     ` Rob Herring
2021-09-14 15:50   ` Rob Herring
2021-09-14 15:50     ` Rob Herring
2021-09-10 19:27 ` [v3 07/10] RISC-V: Add perf platform driver based on SBI PMU extension Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-10 19:27 ` [v3 08/10] RISC-V: Add interrupt support for perf Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-10 19:27 ` [v3 09/10] Documentation: riscv: Remove the old documentation Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-09-10 19:27 ` [v3 10/10] MAINTAINERS: Add entry for RISC-V PMU drivers Atish Patra
2021-09-10 19:27   ` Atish Patra
2021-10-04 18:20 ` [v3 00/10] Improve RISC-V Perf support using SBI PMU and sscofpmf extension Palmer Dabbelt
2021-10-04 18:20   ` Palmer Dabbelt
2021-10-06 18:27   ` Atish Patra
2021-10-06 18:27     ` Atish Patra
2021-10-05  9:17 ` Nikita Shubin
2021-10-05  9:17   ` Nikita Shubin
2021-10-06 18:28   ` Atish Patra
2021-10-06 18:28     ` Atish Patra

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.