* [PULL 00/23] target-arm queue
@ 2021-09-13 16:11 Peter Maydell
2021-09-13 16:11 ` [PULL 01/23] hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase Peter Maydell
` (22 more replies)
0 siblings, 23 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5:
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913
for you to fetch changes up to 9a2b2ecf4d25a3943918c95d2db4508b304161b5:
hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 17:09:28 +0100)
----------------------------------------------------------------
target-arm queue:
* mark MPS2/MPS3 board-internal i2c buses as 'full' so that command
line user-created devices are not plugged into them
* Take an exception if PSTATE.IL is set
* Support an emulated ITS in the virt board
* Add support for kudo-bmc board
* Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
* cadence_uart: Fix clock handling issues that prevented
u-boot from running
----------------------------------------------------------------
Bin Meng (6):
hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase
hw/char: cadence_uart: Disable transmit when input clock is disabled
hw/char: cadence_uart: Move clock/reset check to uart_can_receive()
hw/char: cadence_uart: Convert to memop_with_attrs() ops
hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}()
hw/char: cadence_uart: Log a guest error when device is unclocked or in reset
Chris Rauer (1):
hw/arm: Add support for kudo-bmc board.
Marc Zyngier (1):
hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
Peter Maydell (5):
target/arm: Take an exception if PSTATE.IL is set
qdev: Support marking individual buses as 'full'
hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn
hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full'
hw/arm/mps2.c: Mark internal-only I2C buses as 'full'
Richard Henderson (1):
target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn
Shashi Mallela (9):
hw/intc: GICv3 ITS initial framework
hw/intc: GICv3 ITS register definitions added
hw/intc: GICv3 ITS command queue framework
hw/intc: GICv3 ITS Command processing
hw/intc: GICv3 ITS Feature enablement
hw/intc: GICv3 redistributor ITS processing
tests/data/acpi/virt: Add IORT files for ITS
hw/arm/virt: add ITS support in virt GIC
tests/data/acpi/virt: Update IORT files for ITS
docs/system/arm/nuvoton.rst | 1 +
hw/intc/gicv3_internal.h | 188 ++++-
include/hw/arm/virt.h | 2 +
include/hw/intc/arm_gicv3_common.h | 13 +
include/hw/intc/arm_gicv3_its_common.h | 32 +-
include/hw/qdev-core.h | 24 +
target/arm/cpu.h | 1 +
target/arm/kvm_arm.h | 4 +-
target/arm/syndrome.h | 5 +
target/arm/translate.h | 2 +
hw/arm/mps2-tz.c | 92 ++-
hw/arm/mps2.c | 12 +-
hw/arm/npcm7xx_boards.c | 34 +
hw/arm/virt.c | 29 +-
hw/char/cadence_uart.c | 61 +-
hw/intc/arm_gicv3.c | 14 +
hw/intc/arm_gicv3_common.c | 13 +
hw/intc/arm_gicv3_cpuif.c | 7 +-
hw/intc/arm_gicv3_dist.c | 5 +-
hw/intc/arm_gicv3_its.c | 1322 ++++++++++++++++++++++++++++++++
hw/intc/arm_gicv3_its_common.c | 7 +-
hw/intc/arm_gicv3_its_kvm.c | 2 +-
hw/intc/arm_gicv3_redist.c | 153 +++-
hw/misc/zynq_slcr.c | 31 +-
softmmu/qdev-monitor.c | 7 +-
target/arm/helper-a64.c | 1 +
target/arm/helper.c | 8 +
target/arm/kvm.c | 7 +-
target/arm/translate-a64.c | 255 +++---
target/arm/translate.c | 21 +
hw/intc/meson.build | 1 +
tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes
35 files changed, 2144 insertions(+), 210 deletions(-)
create mode 100644 hw/intc/arm_gicv3_its.c
create mode 100644 tests/data/acpi/virt/IORT
create mode 100644 tests/data/acpi/virt/IORT.memhp
create mode 100644 tests/data/acpi/virt/IORT.numamem
create mode 100644 tests/data/acpi/virt/IORT.pxb
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PULL 01/23] hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 02/23] hw/char: cadence_uart: Disable transmit when input clock is disabled Peter Maydell
` (21 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Bin Meng <bmeng.cn@gmail.com>
As of today, when booting upstream U-Boot for Xilinx Zynq, the UART
does not receive anything. Debugging shows that the UART input clock
frequency is zero which prevents the UART from receiving anything as
per the logic in uart_receive().
From zynq_slcr_reset_exit() comment, it intends to compute output
clocks according to ps_clk and registers. zynq_slcr_compute_clocks()
is called to accomplish the task, inside which device_is_in_reset()
is called to actually make the attempt in vain.
Rework reset_hold() and reset_exit() so that in the reset exit phase,
the logic can really compute output clocks in reset_exit().
With this change, upstream U-Boot boots properly again with:
$ qemu-system-arm -M xilinx-zynq-a9 -m 1G -display none -serial null -serial stdio \
-device loader,file=u-boot-dtb.bin,addr=0x4000000,cpu-num=0
Fixes: 38867cb7ec90 ("hw/misc/zynq_slcr: add clock generation for uarts")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/zynq_slcr.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c
index 5086e6b7ed2..8b702859618 100644
--- a/hw/misc/zynq_slcr.c
+++ b/hw/misc/zynq_slcr.c
@@ -269,6 +269,21 @@ static uint64_t zynq_slcr_compute_clock(const uint64_t periods[],
zynq_slcr_compute_clock((plls), (state)->regs[reg], \
reg ## _ ## enable_field ## _SHIFT)
+static void zynq_slcr_compute_clocks_internal(ZynqSLCRState *s, uint64_t ps_clk)
+{
+ uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]);
+ uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]);
+ uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]);
+
+ uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll};
+
+ /* compute uartX reference clocks */
+ clock_set(s->uart0_ref_clk,
+ ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0));
+ clock_set(s->uart1_ref_clk,
+ ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1));
+}
+
/**
* Compute and set the ouputs clocks periods.
* But do not propagate them further. Connected clocks
@@ -283,17 +298,7 @@ static void zynq_slcr_compute_clocks(ZynqSLCRState *s)
ps_clk = 0;
}
- uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]);
- uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]);
- uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]);
-
- uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll};
-
- /* compute uartX reference clocks */
- clock_set(s->uart0_ref_clk,
- ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0));
- clock_set(s->uart1_ref_clk,
- ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1));
+ zynq_slcr_compute_clocks_internal(s, ps_clk);
}
/**
@@ -416,7 +421,7 @@ static void zynq_slcr_reset_hold(Object *obj)
ZynqSLCRState *s = ZYNQ_SLCR(obj);
/* will disable all output clocks */
- zynq_slcr_compute_clocks(s);
+ zynq_slcr_compute_clocks_internal(s, 0);
zynq_slcr_propagate_clocks(s);
}
@@ -425,7 +430,7 @@ static void zynq_slcr_reset_exit(Object *obj)
ZynqSLCRState *s = ZYNQ_SLCR(obj);
/* will compute output clocks according to ps_clk and registers */
- zynq_slcr_compute_clocks(s);
+ zynq_slcr_compute_clocks_internal(s, clock_get(s->ps_clk));
zynq_slcr_propagate_clocks(s);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 02/23] hw/char: cadence_uart: Disable transmit when input clock is disabled
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
2021-09-13 16:11 ` [PULL 01/23] hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 03/23] hw/char: cadence_uart: Move clock/reset check to uart_can_receive() Peter Maydell
` (20 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Bin Meng <bmeng.cn@gmail.com>
At present when input clock is disabled, any character transmitted
to tx fifo can still show on the serial line, which is wrong.
Fixes: b636db306e06 ("hw/char/cadence_uart: add clock support")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-3-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/char/cadence_uart.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index b4b5e8a3ee0..154be34992b 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -327,6 +327,11 @@ static gboolean cadence_uart_xmit(void *do_not_use, GIOCondition cond,
static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf,
int size)
{
+ /* ignore characters when unclocked or in reset */
+ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ return;
+ }
+
if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) {
return;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 03/23] hw/char: cadence_uart: Move clock/reset check to uart_can_receive()
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
2021-09-13 16:11 ` [PULL 01/23] hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase Peter Maydell
2021-09-13 16:11 ` [PULL 02/23] hw/char: cadence_uart: Disable transmit when input clock is disabled Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 04/23] hw/char: cadence_uart: Convert to memop_with_attrs() ops Peter Maydell
` (19 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Bin Meng <bmeng.cn@gmail.com>
Currently the clock/reset check is done in uart_receive(), but we
can move the check to uart_can_receive() which is earlier.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-4-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/char/cadence_uart.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 154be34992b..fff8be36191 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -235,8 +235,16 @@ static void uart_parameters_setup(CadenceUARTState *s)
static int uart_can_receive(void *opaque)
{
CadenceUARTState *s = opaque;
- int ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE);
- uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
+ int ret;
+ uint32_t ch_mode;
+
+ /* ignore characters when unclocked or in reset */
+ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ return 0;
+ }
+
+ ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE);
+ ch_mode = s->r[R_MR] & UART_MR_CHMODE;
if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
ret = MIN(ret, CADENCE_UART_RX_FIFO_SIZE - s->rx_count);
@@ -358,11 +366,6 @@ static void uart_receive(void *opaque, const uint8_t *buf, int size)
CadenceUARTState *s = opaque;
uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
- /* ignore characters when unclocked or in reset */
- if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
- return;
- }
-
if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
uart_write_rx_fifo(opaque, buf, size);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 04/23] hw/char: cadence_uart: Convert to memop_with_attrs() ops
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2021-09-13 16:11 ` [PULL 03/23] hw/char: cadence_uart: Move clock/reset check to uart_can_receive() Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 05/23] hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}() Peter Maydell
` (18 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Bin Meng <bmeng.cn@gmail.com>
This converts uart_read() and uart_write() to memop_with_attrs() ops.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/char/cadence_uart.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index fff8be36191..8bcf2b718a0 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -411,15 +411,15 @@ static void uart_read_rx_fifo(CadenceUARTState *s, uint32_t *c)
uart_update_status(s);
}
-static void uart_write(void *opaque, hwaddr offset,
- uint64_t value, unsigned size)
+static MemTxResult uart_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size, MemTxAttrs attrs)
{
CadenceUARTState *s = opaque;
DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value);
offset >>= 2;
if (offset >= CADENCE_UART_R_MAX) {
- return;
+ return MEMTX_DECODE_ERROR;
}
switch (offset) {
case R_IER: /* ier (wts imr) */
@@ -466,30 +466,34 @@ static void uart_write(void *opaque, hwaddr offset,
break;
}
uart_update_status(s);
+
+ return MEMTX_OK;
}
-static uint64_t uart_read(void *opaque, hwaddr offset,
- unsigned size)
+static MemTxResult uart_read(void *opaque, hwaddr offset,
+ uint64_t *value, unsigned size, MemTxAttrs attrs)
{
CadenceUARTState *s = opaque;
uint32_t c = 0;
offset >>= 2;
if (offset >= CADENCE_UART_R_MAX) {
- c = 0;
- } else if (offset == R_TX_RX) {
+ return MEMTX_DECODE_ERROR;
+ }
+ if (offset == R_TX_RX) {
uart_read_rx_fifo(s, &c);
} else {
- c = s->r[offset];
+ c = s->r[offset];
}
DB_PRINT(" offset:%x data:%08x\n", (unsigned)(offset << 2), (unsigned)c);
- return c;
+ *value = c;
+ return MEMTX_OK;
}
static const MemoryRegionOps uart_ops = {
- .read = uart_read,
- .write = uart_write,
+ .read_with_attrs = uart_read,
+ .write_with_attrs = uart_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 05/23] hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}()
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2021-09-13 16:11 ` [PULL 04/23] hw/char: cadence_uart: Convert to memop_with_attrs() ops Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 06/23] hw/char: cadence_uart: Log a guest error when device is unclocked or in reset Peter Maydell
` (17 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Bin Meng <bmeng.cn@gmail.com>
Read or write to uart registers when unclocked or in reset should be
ignored. Add the check there, and as a result of this, the check in
uart_write_tx_fifo() is now unnecessary.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-6-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/char/cadence_uart.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 8bcf2b718a0..5f5a4645ac0 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -335,11 +335,6 @@ static gboolean cadence_uart_xmit(void *do_not_use, GIOCondition cond,
static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf,
int size)
{
- /* ignore characters when unclocked or in reset */
- if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
- return;
- }
-
if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) {
return;
}
@@ -416,6 +411,11 @@ static MemTxResult uart_write(void *opaque, hwaddr offset,
{
CadenceUARTState *s = opaque;
+ /* ignore access when unclocked or in reset */
+ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ return MEMTX_ERROR;
+ }
+
DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value);
offset >>= 2;
if (offset >= CADENCE_UART_R_MAX) {
@@ -476,6 +476,11 @@ static MemTxResult uart_read(void *opaque, hwaddr offset,
CadenceUARTState *s = opaque;
uint32_t c = 0;
+ /* ignore access when unclocked or in reset */
+ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ return MEMTX_ERROR;
+ }
+
offset >>= 2;
if (offset >= CADENCE_UART_R_MAX) {
return MEMTX_DECODE_ERROR;
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 06/23] hw/char: cadence_uart: Log a guest error when device is unclocked or in reset
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2021-09-13 16:11 ` [PULL 05/23] hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}() Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 07/23] hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM Peter Maydell
` (16 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Bin Meng <bmeng.cn@gmail.com>
We've got SW that expects FSBL (Bootlooader) to setup clocks and
resets. It's quite common that users run that SW on QEMU without
FSBL (FSBL typically requires the Xilinx tools installed). That's
fine, since users can stil use -device loader to enable clocks etc.
To help folks understand what's going, a log (guest-error) message
would be helpful here. In particular with the serial port since
things will go very quiet if they get things wrong.
Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-7-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/char/cadence_uart.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 5f5a4645ac0..c069a30842e 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -240,6 +240,8 @@ static int uart_can_receive(void *opaque)
/* ignore characters when unclocked or in reset */
if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
+ __func__);
return 0;
}
@@ -376,6 +378,8 @@ static void uart_event(void *opaque, QEMUChrEvent event)
/* ignore characters when unclocked or in reset */
if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
+ __func__);
return;
}
@@ -413,6 +417,8 @@ static MemTxResult uart_write(void *opaque, hwaddr offset,
/* ignore access when unclocked or in reset */
if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
+ __func__);
return MEMTX_ERROR;
}
@@ -478,6 +484,8 @@ static MemTxResult uart_read(void *opaque, hwaddr offset,
/* ignore access when unclocked or in reset */
if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
+ __func__);
return MEMTX_ERROR;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 07/23] hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2021-09-13 16:11 ` [PULL 06/23] hw/char: cadence_uart: Log a guest error when device is unclocked or in reset Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 08/23] hw/arm: Add support for kudo-bmc board Peter Maydell
` (15 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Marc Zyngier <maz@kernel.org>
Although we probe for the IPA limits imposed by KVM (and the hardware)
when computing the memory map, we still use the old style '0' when
creating a scratch VM in kvm_arm_create_scratch_host_vcpu().
On systems that are severely IPA challenged (such as the Apple M1),
this results in a failure as KVM cannot use the default 40bit that
'0' represents.
Instead, probe for the extension and use the reported IPA limit
if available.
Cc: Andrew Jones <drjones@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20210822144441.1290891-2-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/kvm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/target/arm/kvm.c b/target/arm/kvm.c
index 5d55de1a493..94b970bbf9b 100644
--- a/target/arm/kvm.c
+++ b/target/arm/kvm.c
@@ -70,12 +70,17 @@ bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,
struct kvm_vcpu_init *init)
{
int ret = 0, kvmfd = -1, vmfd = -1, cpufd = -1;
+ int max_vm_pa_size;
kvmfd = qemu_open_old("/dev/kvm", O_RDWR);
if (kvmfd < 0) {
goto err;
}
- vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0);
+ max_vm_pa_size = ioctl(kvmfd, KVM_CHECK_EXTENSION, KVM_CAP_ARM_VM_IPA_SIZE);
+ if (max_vm_pa_size < 0) {
+ max_vm_pa_size = 0;
+ }
+ vmfd = ioctl(kvmfd, KVM_CREATE_VM, max_vm_pa_size);
if (vmfd < 0) {
goto err;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 08/23] hw/arm: Add support for kudo-bmc board.
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2021-09-13 16:11 ` [PULL 07/23] hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 09/23] hw/intc: GICv3 ITS initial framework Peter Maydell
` (14 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Chris Rauer <crauer@google.com>
kudo-bmc is a board supported by OpenBMC.
https://github.com/openbmc/openbmc/tree/master/meta-fii/meta-kudo
Since v1:
- hyphenated Cortex-A9
Tested: Booted kudo firmware.
Signed-off-by: Chris Rauer <crauer@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20210907223234.1165705-1-crauer@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
docs/system/arm/nuvoton.rst | 1 +
hw/arm/npcm7xx_boards.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+)
diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
index 69f57c2886f..adf497e6791 100644
--- a/docs/system/arm/nuvoton.rst
+++ b/docs/system/arm/nuvoton.rst
@@ -20,6 +20,7 @@ Hyperscale applications. The following machines are based on this chip :
- ``quanta-gbs-bmc`` Quanta GBS server BMC
- ``quanta-gsj`` Quanta GSJ server BMC
+- ``kudo-bmc`` Fii USA Kudo server BMC
There are also two more SoCs, NPCM710 and NPCM705, which are single-core
variants of NPCM750 and NPCM730, respectively. These are currently not
diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index e5a32439954..a656169f61e 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -31,6 +31,7 @@
#define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7
#define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff
#define QUANTA_GBS_POWER_ON_STRAPS 0x000017ff
+#define KUDO_BMC_POWER_ON_STRAPS 0x00001fff
static const char npcm7xx_default_bootrom[] = "npcm7xx_bootrom.bin";
@@ -357,6 +358,23 @@ static void quanta_gbs_init(MachineState *machine)
npcm7xx_load_kernel(machine, soc);
}
+static void kudo_bmc_init(MachineState *machine)
+{
+ NPCM7xxState *soc;
+
+ soc = npcm7xx_create_soc(machine, KUDO_BMC_POWER_ON_STRAPS);
+ npcm7xx_connect_dram(soc, machine->ram);
+ qdev_realize(DEVICE(soc), NULL, &error_fatal);
+
+ npcm7xx_load_bootrom(machine, soc);
+ npcm7xx_connect_flash(&soc->fiu[0], 0, "mx66u51235f",
+ drive_get(IF_MTD, 0, 0));
+ npcm7xx_connect_flash(&soc->fiu[1], 0, "mx66u51235f",
+ drive_get(IF_MTD, 3, 0));
+
+ npcm7xx_load_kernel(machine, soc);
+}
+
static void npcm7xx_set_soc_type(NPCM7xxMachineClass *nmc, const char *type)
{
NPCM7xxClass *sc = NPCM7XX_CLASS(object_class_by_name(type));
@@ -417,6 +435,18 @@ static void gbs_bmc_machine_class_init(ObjectClass *oc, void *data)
mc->default_ram_size = 1 * GiB;
}
+static void kudo_bmc_machine_class_init(ObjectClass *oc, void *data)
+{
+ NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_CLASS(oc);
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ npcm7xx_set_soc_type(nmc, TYPE_NPCM730);
+
+ mc->desc = "Kudo BMC (Cortex-A9)";
+ mc->init = kudo_bmc_init;
+ mc->default_ram_size = 1 * GiB;
+};
+
static const TypeInfo npcm7xx_machine_types[] = {
{
.name = TYPE_NPCM7XX_MACHINE,
@@ -437,6 +467,10 @@ static const TypeInfo npcm7xx_machine_types[] = {
.name = MACHINE_TYPE_NAME("quanta-gbs-bmc"),
.parent = TYPE_NPCM7XX_MACHINE,
.class_init = gbs_bmc_machine_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("kudo-bmc"),
+ .parent = TYPE_NPCM7XX_MACHINE,
+ .class_init = kudo_bmc_machine_class_init,
},
};
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 09/23] hw/intc: GICv3 ITS initial framework
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2021-09-13 16:11 ` [PULL 08/23] hw/arm: Add support for kudo-bmc board Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 10/23] hw/intc: GICv3 ITS register definitions added Peter Maydell
` (13 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Added register definitions relevant to ITS,implemented overall
ITS device framework with stubs for ITS control and translater
regions read/write,extended ITS common to handle mmio init between
existing kvm device and newer qemu device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-2-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/gicv3_internal.h | 96 +++++++++-
include/hw/intc/arm_gicv3_its_common.h | 9 +-
hw/intc/arm_gicv3_its.c | 241 +++++++++++++++++++++++++
hw/intc/arm_gicv3_its_common.c | 7 +-
hw/intc/arm_gicv3_its_kvm.c | 2 +-
hw/intc/meson.build | 1 +
6 files changed, 342 insertions(+), 14 deletions(-)
create mode 100644 hw/intc/arm_gicv3_its.c
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 05303a55c88..b99bf9db465 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -24,6 +24,7 @@
#ifndef QEMU_ARM_GICV3_INTERNAL_H
#define QEMU_ARM_GICV3_INTERNAL_H
+#include "hw/registerfields.h"
#include "hw/intc/arm_gicv3_common.h"
/* Distributor registers, as offsets from the distributor base address */
@@ -67,6 +68,9 @@
#define GICD_CTLR_E1NWF (1U << 7)
#define GICD_CTLR_RWP (1U << 31)
+/* 16 bits EventId */
+#define GICD_TYPER_IDBITS 0xf
+
/*
* Redistributor frame offsets from RD_base
*/
@@ -122,17 +126,17 @@
#define GICR_WAKER_ProcessorSleep (1U << 1)
#define GICR_WAKER_ChildrenAsleep (1U << 2)
-#define GICR_PROPBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
-#define GICR_PROPBASER_ADDR_MASK (0xfffffffffULL << 12)
-#define GICR_PROPBASER_SHAREABILITY_MASK (3U << 10)
-#define GICR_PROPBASER_CACHEABILITY_MASK (7U << 7)
-#define GICR_PROPBASER_IDBITS_MASK (0x1f)
+FIELD(GICR_PROPBASER, IDBITS, 0, 5)
+FIELD(GICR_PROPBASER, INNERCACHE, 7, 3)
+FIELD(GICR_PROPBASER, SHAREABILITY, 10, 2)
+FIELD(GICR_PROPBASER, PHYADDR, 12, 40)
+FIELD(GICR_PROPBASER, OUTERCACHE, 56, 3)
-#define GICR_PENDBASER_PTZ (1ULL << 62)
-#define GICR_PENDBASER_OUTER_CACHEABILITY_MASK (7ULL << 56)
-#define GICR_PENDBASER_ADDR_MASK (0xffffffffULL << 16)
-#define GICR_PENDBASER_SHAREABILITY_MASK (3U << 10)
-#define GICR_PENDBASER_CACHEABILITY_MASK (7U << 7)
+FIELD(GICR_PENDBASER, INNERCACHE, 7, 3)
+FIELD(GICR_PENDBASER, SHAREABILITY, 10, 2)
+FIELD(GICR_PENDBASER, PHYADDR, 16, 36)
+FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3)
+FIELD(GICR_PENDBASER, PTZ, 62, 1)
#define ICC_CTLR_EL1_CBPR (1U << 0)
#define ICC_CTLR_EL1_EOIMODE (1U << 1)
@@ -239,6 +243,78 @@
#define ICH_VTR_EL2_PREBITS_SHIFT 26
#define ICH_VTR_EL2_PRIBITS_SHIFT 29
+/* ITS Registers */
+
+FIELD(GITS_BASER, SIZE, 0, 8)
+FIELD(GITS_BASER, PAGESIZE, 8, 2)
+FIELD(GITS_BASER, SHAREABILITY, 10, 2)
+FIELD(GITS_BASER, PHYADDR, 12, 36)
+FIELD(GITS_BASER, PHYADDRL_64K, 16, 32)
+FIELD(GITS_BASER, PHYADDRH_64K, 12, 4)
+FIELD(GITS_BASER, ENTRYSIZE, 48, 5)
+FIELD(GITS_BASER, OUTERCACHE, 53, 3)
+FIELD(GITS_BASER, TYPE, 56, 3)
+FIELD(GITS_BASER, INNERCACHE, 59, 3)
+FIELD(GITS_BASER, INDIRECT, 62, 1)
+FIELD(GITS_BASER, VALID, 63, 1)
+
+FIELD(GITS_CTLR, QUIESCENT, 31, 1)
+
+FIELD(GITS_TYPER, PHYSICAL, 0, 1)
+FIELD(GITS_TYPER, ITT_ENTRY_SIZE, 4, 4)
+FIELD(GITS_TYPER, IDBITS, 8, 5)
+FIELD(GITS_TYPER, DEVBITS, 13, 5)
+FIELD(GITS_TYPER, SEIS, 18, 1)
+FIELD(GITS_TYPER, PTA, 19, 1)
+FIELD(GITS_TYPER, CIDBITS, 32, 4)
+FIELD(GITS_TYPER, CIL, 36, 1)
+
+#define GITS_BASER_PAGESIZE_4K 0
+#define GITS_BASER_PAGESIZE_16K 1
+#define GITS_BASER_PAGESIZE_64K 2
+
+#define GITS_BASER_TYPE_DEVICE 1ULL
+#define GITS_BASER_TYPE_COLLECTION 4ULL
+
+/**
+ * Default features advertised by this version of ITS
+ */
+/* Physical LPIs supported */
+#define GITS_TYPE_PHYSICAL (1U << 0)
+
+/*
+ * 12 bytes Interrupt translation Table Entry size
+ * as per Table 5.3 in GICv3 spec
+ * ITE Lower 8 Bytes
+ * Bits: | 49 ... 26 | 25 ... 2 | 1 | 0 |
+ * Values: | 1023 | IntNum | IntType | Valid |
+ * ITE Higher 4 Bytes
+ * Bits: | 31 ... 16 | 15 ...0 |
+ * Values: | vPEID | ICID |
+ */
+#define ITS_ITT_ENTRY_SIZE 0xC
+
+/* 16 bits EventId */
+#define ITS_IDBITS GICD_TYPER_IDBITS
+
+/* 16 bits DeviceId */
+#define ITS_DEVBITS 0xF
+
+/* 16 bits CollectionId */
+#define ITS_CIDBITS 0xF
+
+/*
+ * 8 bytes Device Table Entry size
+ * Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits
+ */
+#define GITS_DTE_SIZE (0x8ULL)
+
+/*
+ * 8 bytes Collection Table Entry size
+ * Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
+ */
+#define GITS_CTE_SIZE (0x8ULL)
+
/* Special interrupt IDs */
#define INTID_SECURE 1020
#define INTID_NONSECURE 1021
diff --git a/include/hw/intc/arm_gicv3_its_common.h b/include/hw/intc/arm_gicv3_its_common.h
index 5a0952b4049..65d1191db17 100644
--- a/include/hw/intc/arm_gicv3_its_common.h
+++ b/include/hw/intc/arm_gicv3_its_common.h
@@ -25,17 +25,22 @@
#include "hw/intc/arm_gicv3_common.h"
#include "qom/object.h"
+#define TYPE_ARM_GICV3_ITS "arm-gicv3-its"
+
#define ITS_CONTROL_SIZE 0x10000
#define ITS_TRANS_SIZE 0x10000
#define ITS_SIZE (ITS_CONTROL_SIZE + ITS_TRANS_SIZE)
#define GITS_CTLR 0x0
#define GITS_IIDR 0x4
+#define GITS_TYPER 0x8
#define GITS_CBASER 0x80
#define GITS_CWRITER 0x88
#define GITS_CREADR 0x90
#define GITS_BASER 0x100
+#define GITS_TRANSLATER 0x0040
+
struct GICv3ITSState {
SysBusDevice parent_obj;
@@ -52,6 +57,7 @@ struct GICv3ITSState {
/* Registers */
uint32_t ctlr;
uint32_t iidr;
+ uint64_t typer;
uint64_t cbaser;
uint64_t cwriter;
uint64_t creadr;
@@ -62,7 +68,8 @@ struct GICv3ITSState {
typedef struct GICv3ITSState GICv3ITSState;
-void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops);
+void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
+ const MemoryRegionOps *tops);
#define TYPE_ARM_GICV3_ITS_COMMON "arm-gicv3-its-common"
typedef struct GICv3ITSCommonClass GICv3ITSCommonClass;
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
new file mode 100644
index 00000000000..83ece7c4c1d
--- /dev/null
+++ b/hw/intc/arm_gicv3_its.c
@@ -0,0 +1,241 @@
+/*
+ * ITS emulation for a GICv3-based system
+ *
+ * Copyright Linaro.org 2021
+ *
+ * Authors:
+ * Shashi Mallela <shashi.mallela@linaro.org>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at your
+ * option) any later version. See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/qdev-properties.h"
+#include "hw/intc/arm_gicv3_its_common.h"
+#include "gicv3_internal.h"
+#include "qom/object.h"
+#include "qapi/error.h"
+
+typedef struct GICv3ITSClass GICv3ITSClass;
+/* This is reusing the GICv3ITSState typedef from ARM_GICV3_ITS_COMMON */
+DECLARE_OBJ_CHECKERS(GICv3ITSState, GICv3ITSClass,
+ ARM_GICV3_ITS, TYPE_ARM_GICV3_ITS)
+
+struct GICv3ITSClass {
+ GICv3ITSCommonClass parent_class;
+ void (*parent_reset)(DeviceState *dev);
+};
+
+static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
+ uint64_t data, unsigned size,
+ MemTxAttrs attrs)
+{
+ return MEMTX_OK;
+}
+
+static bool its_writel(GICv3ITSState *s, hwaddr offset,
+ uint64_t value, MemTxAttrs attrs)
+{
+ bool result = true;
+
+ return result;
+}
+
+static bool its_readl(GICv3ITSState *s, hwaddr offset,
+ uint64_t *data, MemTxAttrs attrs)
+{
+ bool result = true;
+
+ return result;
+}
+
+static bool its_writell(GICv3ITSState *s, hwaddr offset,
+ uint64_t value, MemTxAttrs attrs)
+{
+ bool result = true;
+
+ return result;
+}
+
+static bool its_readll(GICv3ITSState *s, hwaddr offset,
+ uint64_t *data, MemTxAttrs attrs)
+{
+ bool result = true;
+
+ return result;
+}
+
+static MemTxResult gicv3_its_read(void *opaque, hwaddr offset, uint64_t *data,
+ unsigned size, MemTxAttrs attrs)
+{
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
+ bool result;
+
+ switch (size) {
+ case 4:
+ result = its_readl(s, offset, data, attrs);
+ break;
+ case 8:
+ result = its_readll(s, offset, data, attrs);
+ break;
+ default:
+ result = false;
+ break;
+ }
+
+ if (!result) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest read at offset " TARGET_FMT_plx
+ "size %u\n", __func__, offset, size);
+ /*
+ * The spec requires that reserved registers are RAZ/WI;
+ * so use false returns from leaf functions as a way to
+ * trigger the guest-error logging but don't return it to
+ * the caller, or we'll cause a spurious guest data abort.
+ */
+ *data = 0;
+ }
+ return MEMTX_OK;
+}
+
+static MemTxResult gicv3_its_write(void *opaque, hwaddr offset, uint64_t data,
+ unsigned size, MemTxAttrs attrs)
+{
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
+ bool result;
+
+ switch (size) {
+ case 4:
+ result = its_writel(s, offset, data, attrs);
+ break;
+ case 8:
+ result = its_writell(s, offset, data, attrs);
+ break;
+ default:
+ result = false;
+ break;
+ }
+
+ if (!result) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write at offset " TARGET_FMT_plx
+ "size %u\n", __func__, offset, size);
+ /*
+ * The spec requires that reserved registers are RAZ/WI;
+ * so use false returns from leaf functions as a way to
+ * trigger the guest-error logging but don't return it to
+ * the caller, or we'll cause a spurious guest data abort.
+ */
+ }
+ return MEMTX_OK;
+}
+
+static const MemoryRegionOps gicv3_its_control_ops = {
+ .read_with_attrs = gicv3_its_read,
+ .write_with_attrs = gicv3_its_write,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const MemoryRegionOps gicv3_its_translation_ops = {
+ .write_with_attrs = gicv3_its_translation_write,
+ .valid.min_access_size = 2,
+ .valid.max_access_size = 4,
+ .impl.min_access_size = 2,
+ .impl.max_access_size = 4,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void gicv3_arm_its_realize(DeviceState *dev, Error **errp)
+{
+ GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
+ int i;
+
+ for (i = 0; i < s->gicv3->num_cpu; i++) {
+ if (!(s->gicv3->cpu[i].gicr_typer & GICR_TYPER_PLPIS)) {
+ error_setg(errp, "Physical LPI not supported by CPU %d", i);
+ return;
+ }
+ }
+
+ gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops);
+
+ /* set the ITS default features supported */
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL,
+ GITS_TYPE_PHYSICAL);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, ITT_ENTRY_SIZE,
+ ITS_ITT_ENTRY_SIZE - 1);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, IDBITS, ITS_IDBITS);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, DEVBITS, ITS_DEVBITS);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIL, 1);
+ s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIDBITS, ITS_CIDBITS);
+}
+
+static void gicv3_its_reset(DeviceState *dev)
+{
+ GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
+ GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s);
+
+ c->parent_reset(dev);
+
+ /* Quiescent bit reset to 1 */
+ s->ctlr = FIELD_DP32(s->ctlr, GITS_CTLR, QUIESCENT, 1);
+
+ /*
+ * setting GITS_BASER0.Type = 0b001 (Device)
+ * GITS_BASER1.Type = 0b100 (Collection Table)
+ * GITS_BASER<n>.Type,where n = 3 to 7 are 0b00 (Unimplemented)
+ * GITS_BASER<0,1>.Page_Size = 64KB
+ * and default translation table entry size to 16 bytes
+ */
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, TYPE,
+ GITS_BASER_TYPE_DEVICE);
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, PAGESIZE,
+ GITS_BASER_PAGESIZE_64K);
+ s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, ENTRYSIZE,
+ GITS_DTE_SIZE - 1);
+
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, TYPE,
+ GITS_BASER_TYPE_COLLECTION);
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, PAGESIZE,
+ GITS_BASER_PAGESIZE_64K);
+ s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, ENTRYSIZE,
+ GITS_CTE_SIZE - 1);
+}
+
+static Property gicv3_its_props[] = {
+ DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3",
+ GICv3State *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void gicv3_its_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
+
+ dc->realize = gicv3_arm_its_realize;
+ device_class_set_props(dc, gicv3_its_props);
+ device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset);
+}
+
+static const TypeInfo gicv3_its_info = {
+ .name = TYPE_ARM_GICV3_ITS,
+ .parent = TYPE_ARM_GICV3_ITS_COMMON,
+ .instance_size = sizeof(GICv3ITSState),
+ .class_init = gicv3_its_class_init,
+ .class_size = sizeof(GICv3ITSClass),
+};
+
+static void gicv3_its_register_types(void)
+{
+ type_register_static(&gicv3_its_info);
+}
+
+type_init(gicv3_its_register_types)
diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c
index 66c4c6a1888..7d7f3882e76 100644
--- a/hw/intc/arm_gicv3_its_common.c
+++ b/hw/intc/arm_gicv3_its_common.c
@@ -50,6 +50,8 @@ static int gicv3_its_post_load(void *opaque, int version_id)
static const VMStateDescription vmstate_its = {
.name = "arm_gicv3_its",
+ .version_id = 1,
+ .minimum_version_id = 1,
.pre_save = gicv3_its_pre_save,
.post_load = gicv3_its_post_load,
.priority = MIG_PRI_GICV3_ITS,
@@ -99,14 +101,15 @@ static const MemoryRegionOps gicv3_its_trans_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops)
+void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops,
+ const MemoryRegionOps *tops)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(s);
memory_region_init_io(&s->iomem_its_cntrl, OBJECT(s), ops, s,
"control", ITS_CONTROL_SIZE);
memory_region_init_io(&s->iomem_its_translation, OBJECT(s),
- &gicv3_its_trans_ops, s,
+ tops ? tops : &gicv3_its_trans_ops, s,
"translation", ITS_TRANS_SIZE);
/* Our two regions are always adjacent, therefore we now combine them
diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c
index b554d2ede0a..0b4cbed28b3 100644
--- a/hw/intc/arm_gicv3_its_kvm.c
+++ b/hw/intc/arm_gicv3_its_kvm.c
@@ -106,7 +106,7 @@ static void kvm_arm_its_realize(DeviceState *dev, Error **errp)
kvm_arm_register_device(&s->iomem_its_cntrl, -1, KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_ITS_ADDR_TYPE, s->dev_fd, 0);
- gicv3_its_init_mmio(s, NULL);
+ gicv3_its_init_mmio(s, NULL, NULL);
if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_ITS_REGS,
GITS_CTLR)) {
diff --git a/hw/intc/meson.build b/hw/intc/meson.build
index 6e52a166e38..4dcfea6aa8b 100644
--- a/hw/intc/meson.build
+++ b/hw/intc/meson.build
@@ -8,6 +8,7 @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files(
'arm_gicv3_dist.c',
'arm_gicv3_its_common.c',
'arm_gicv3_redist.c',
+ 'arm_gicv3_its.c',
))
softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c'))
softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 10/23] hw/intc: GICv3 ITS register definitions added
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2021-09-13 16:11 ` [PULL 09/23] hw/intc: GICv3 ITS initial framework Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 11/23] hw/intc: GICv3 ITS command queue framework Peter Maydell
` (12 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Defined descriptors for ITS device table,collection table and ITS
command queue entities.Implemented register read/write functions,
extract ITS table parameters and command queue parameters,extended
gicv3 common to capture qemu address space(which host the ITS table
platform memories required for subsequent ITS processing) and
initialize the same in ITS device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-3-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/gicv3_internal.h | 29 ++
include/hw/intc/arm_gicv3_common.h | 3 +
include/hw/intc/arm_gicv3_its_common.h | 23 ++
hw/intc/arm_gicv3_its.c | 376 +++++++++++++++++++++++++
4 files changed, 431 insertions(+)
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index b99bf9db465..92e0a4fa686 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -258,6 +258,20 @@ FIELD(GITS_BASER, INNERCACHE, 59, 3)
FIELD(GITS_BASER, INDIRECT, 62, 1)
FIELD(GITS_BASER, VALID, 63, 1)
+FIELD(GITS_CBASER, SIZE, 0, 8)
+FIELD(GITS_CBASER, SHAREABILITY, 10, 2)
+FIELD(GITS_CBASER, PHYADDR, 12, 40)
+FIELD(GITS_CBASER, OUTERCACHE, 53, 3)
+FIELD(GITS_CBASER, INNERCACHE, 59, 3)
+FIELD(GITS_CBASER, VALID, 63, 1)
+
+FIELD(GITS_CREADR, STALLED, 0, 1)
+FIELD(GITS_CREADR, OFFSET, 5, 15)
+
+FIELD(GITS_CWRITER, RETRY, 0, 1)
+FIELD(GITS_CWRITER, OFFSET, 5, 15)
+
+FIELD(GITS_CTLR, ENABLED, 0, 1)
FIELD(GITS_CTLR, QUIESCENT, 31, 1)
FIELD(GITS_TYPER, PHYSICAL, 0, 1)
@@ -269,6 +283,13 @@ FIELD(GITS_TYPER, PTA, 19, 1)
FIELD(GITS_TYPER, CIDBITS, 32, 4)
FIELD(GITS_TYPER, CIL, 36, 1)
+#define GITS_IDREGS 0xFFD0
+
+#define ITS_CTLR_ENABLED (1U) /* ITS Enabled */
+
+#define GITS_BASER_RO_MASK (R_GITS_BASER_ENTRYSIZE_MASK | \
+ R_GITS_BASER_TYPE_MASK)
+
#define GITS_BASER_PAGESIZE_4K 0
#define GITS_BASER_PAGESIZE_16K 1
#define GITS_BASER_PAGESIZE_64K 2
@@ -276,6 +297,14 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define GITS_BASER_TYPE_DEVICE 1ULL
#define GITS_BASER_TYPE_COLLECTION 4ULL
+#define GITS_PAGE_SIZE_4K 0x1000
+#define GITS_PAGE_SIZE_16K 0x4000
+#define GITS_PAGE_SIZE_64K 0x10000
+
+#define L1TABLE_ENTRY_SIZE 8
+
+#define GITS_CMDQ_ENTRY_SIZE 32
+
/**
* Default features advertised by this version of ITS
*/
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index 91491a2f664..1fd5cedbbdb 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -226,6 +226,9 @@ struct GICv3State {
int dev_fd; /* kvm device fd if backed by kvm vgic support */
Error *migration_blocker;
+ MemoryRegion *dma;
+ AddressSpace dma_as;
+
/* Distributor */
/* for a GIC with the security extensions the NS banked version of this
diff --git a/include/hw/intc/arm_gicv3_its_common.h b/include/hw/intc/arm_gicv3_its_common.h
index 65d1191db17..4e79145dde3 100644
--- a/include/hw/intc/arm_gicv3_its_common.h
+++ b/include/hw/intc/arm_gicv3_its_common.h
@@ -41,6 +41,25 @@
#define GITS_TRANSLATER 0x0040
+typedef struct {
+ bool valid;
+ bool indirect;
+ uint16_t entry_sz;
+ uint32_t page_sz;
+ uint32_t max_entries;
+ union {
+ uint32_t max_devids;
+ uint32_t max_collids;
+ } maxids;
+ uint64_t base_addr;
+} TableDesc;
+
+typedef struct {
+ bool valid;
+ uint32_t max_entries;
+ uint64_t base_addr;
+} CmdQDesc;
+
struct GICv3ITSState {
SysBusDevice parent_obj;
@@ -63,6 +82,10 @@ struct GICv3ITSState {
uint64_t creadr;
uint64_t baser[8];
+ TableDesc dt;
+ TableDesc ct;
+ CmdQDesc cq;
+
Error *migration_blocker;
};
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 83ece7c4c1d..8234939ccc1 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -29,6 +29,160 @@ struct GICv3ITSClass {
void (*parent_reset)(DeviceState *dev);
};
+static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
+{
+ uint64_t result = 0;
+
+ switch (page_sz) {
+ case GITS_PAGE_SIZE_4K:
+ case GITS_PAGE_SIZE_16K:
+ result = FIELD_EX64(value, GITS_BASER, PHYADDR) << 12;
+ break;
+
+ case GITS_PAGE_SIZE_64K:
+ result = FIELD_EX64(value, GITS_BASER, PHYADDRL_64K) << 16;
+ result |= FIELD_EX64(value, GITS_BASER, PHYADDRH_64K) << 48;
+ break;
+
+ default:
+ break;
+ }
+ return result;
+}
+
+/*
+ * This function extracts the ITS Device and Collection table specific
+ * parameters (like base_addr, size etc) from GITS_BASER register.
+ * It is called during ITS enable and also during post_load migration
+ */
+static void extract_table_params(GICv3ITSState *s)
+{
+ uint16_t num_pages = 0;
+ uint8_t page_sz_type;
+ uint8_t type;
+ uint32_t page_sz = 0;
+ uint64_t value;
+
+ for (int i = 0; i < 8; i++) {
+ value = s->baser[i];
+
+ if (!value) {
+ continue;
+ }
+
+ page_sz_type = FIELD_EX64(value, GITS_BASER, PAGESIZE);
+
+ switch (page_sz_type) {
+ case 0:
+ page_sz = GITS_PAGE_SIZE_4K;
+ break;
+
+ case 1:
+ page_sz = GITS_PAGE_SIZE_16K;
+ break;
+
+ case 2:
+ case 3:
+ page_sz = GITS_PAGE_SIZE_64K;
+ break;
+
+ default:
+ g_assert_not_reached();
+ }
+
+ num_pages = FIELD_EX64(value, GITS_BASER, SIZE) + 1;
+
+ type = FIELD_EX64(value, GITS_BASER, TYPE);
+
+ switch (type) {
+
+ case GITS_BASER_TYPE_DEVICE:
+ memset(&s->dt, 0 , sizeof(s->dt));
+ s->dt.valid = FIELD_EX64(value, GITS_BASER, VALID);
+
+ if (!s->dt.valid) {
+ return;
+ }
+
+ s->dt.page_sz = page_sz;
+ s->dt.indirect = FIELD_EX64(value, GITS_BASER, INDIRECT);
+ s->dt.entry_sz = FIELD_EX64(value, GITS_BASER, ENTRYSIZE);
+
+ if (!s->dt.indirect) {
+ s->dt.max_entries = (num_pages * page_sz) / s->dt.entry_sz;
+ } else {
+ s->dt.max_entries = (((num_pages * page_sz) /
+ L1TABLE_ENTRY_SIZE) *
+ (page_sz / s->dt.entry_sz));
+ }
+
+ s->dt.maxids.max_devids = (1UL << (FIELD_EX64(s->typer, GITS_TYPER,
+ DEVBITS) + 1));
+
+ s->dt.base_addr = baser_base_addr(value, page_sz);
+
+ break;
+
+ case GITS_BASER_TYPE_COLLECTION:
+ memset(&s->ct, 0 , sizeof(s->ct));
+ s->ct.valid = FIELD_EX64(value, GITS_BASER, VALID);
+
+ /*
+ * GITS_TYPER.HCC is 0 for this implementation
+ * hence writes are discarded if ct.valid is 0
+ */
+ if (!s->ct.valid) {
+ return;
+ }
+
+ s->ct.page_sz = page_sz;
+ s->ct.indirect = FIELD_EX64(value, GITS_BASER, INDIRECT);
+ s->ct.entry_sz = FIELD_EX64(value, GITS_BASER, ENTRYSIZE);
+
+ if (!s->ct.indirect) {
+ s->ct.max_entries = (num_pages * page_sz) / s->ct.entry_sz;
+ } else {
+ s->ct.max_entries = (((num_pages * page_sz) /
+ L1TABLE_ENTRY_SIZE) *
+ (page_sz / s->ct.entry_sz));
+ }
+
+ if (FIELD_EX64(s->typer, GITS_TYPER, CIL)) {
+ s->ct.maxids.max_collids = (1UL << (FIELD_EX64(s->typer,
+ GITS_TYPER, CIDBITS) + 1));
+ } else {
+ /* 16-bit CollectionId supported when CIL == 0 */
+ s->ct.maxids.max_collids = (1UL << 16);
+ }
+
+ s->ct.base_addr = baser_base_addr(value, page_sz);
+
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
+static void extract_cmdq_params(GICv3ITSState *s)
+{
+ uint16_t num_pages = 0;
+ uint64_t value = s->cbaser;
+
+ num_pages = FIELD_EX64(value, GITS_CBASER, SIZE) + 1;
+
+ memset(&s->cq, 0 , sizeof(s->cq));
+ s->cq.valid = FIELD_EX64(value, GITS_CBASER, VALID);
+
+ if (s->cq.valid) {
+ s->cq.max_entries = (num_pages * GITS_PAGE_SIZE_4K) /
+ GITS_CMDQ_ENTRY_SIZE;
+ s->cq.base_addr = FIELD_EX64(value, GITS_CBASER, PHYADDR);
+ s->cq.base_addr <<= R_GITS_CBASER_PHYADDR_SHIFT;
+ }
+}
+
static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
uint64_t data, unsigned size,
MemTxAttrs attrs)
@@ -40,7 +194,99 @@ static bool its_writel(GICv3ITSState *s, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
bool result = true;
+ int index;
+ switch (offset) {
+ case GITS_CTLR:
+ s->ctlr |= (value & ~(s->ctlr));
+
+ if (s->ctlr & ITS_CTLR_ENABLED) {
+ extract_table_params(s);
+ extract_cmdq_params(s);
+ s->creadr = 0;
+ }
+ break;
+ case GITS_CBASER:
+ /*
+ * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ s->cbaser = deposit64(s->cbaser, 0, 32, value);
+ s->creadr = 0;
+ s->cwriter = s->creadr;
+ }
+ break;
+ case GITS_CBASER + 4:
+ /*
+ * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ s->cbaser = deposit64(s->cbaser, 32, 32, value);
+ s->creadr = 0;
+ s->cwriter = s->creadr;
+ }
+ break;
+ case GITS_CWRITER:
+ s->cwriter = deposit64(s->cwriter, 0, 32,
+ (value & ~R_GITS_CWRITER_RETRY_MASK));
+ break;
+ case GITS_CWRITER + 4:
+ s->cwriter = deposit64(s->cwriter, 32, 32, value);
+ break;
+ case GITS_CREADR:
+ if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
+ s->creadr = deposit64(s->creadr, 0, 32,
+ (value & ~R_GITS_CREADR_STALLED_MASK));
+ } else {
+ /* RO register, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ }
+ break;
+ case GITS_CREADR + 4:
+ if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
+ s->creadr = deposit64(s->creadr, 32, 32, value);
+ } else {
+ /* RO register, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ }
+ break;
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ /*
+ * IMPDEF choice:- GITS_BASERn register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ index = (offset - GITS_BASER) / 8;
+
+ if (offset & 7) {
+ value <<= 32;
+ value &= ~GITS_BASER_RO_MASK;
+ s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(0, 32);
+ s->baser[index] |= value;
+ } else {
+ value &= ~GITS_BASER_RO_MASK;
+ s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(32, 32);
+ s->baser[index] |= value;
+ }
+ }
+ break;
+ case GITS_IIDR:
+ case GITS_IDREGS ... GITS_IDREGS + 0x2f:
+ /* RO registers, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ break;
+ default:
+ result = false;
+ break;
+ }
return result;
}
@@ -48,7 +294,55 @@ static bool its_readl(GICv3ITSState *s, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
bool result = true;
+ int index;
+ switch (offset) {
+ case GITS_CTLR:
+ *data = s->ctlr;
+ break;
+ case GITS_IIDR:
+ *data = gicv3_iidr();
+ break;
+ case GITS_IDREGS ... GITS_IDREGS + 0x2f:
+ /* ID registers */
+ *data = gicv3_idreg(offset - GITS_IDREGS);
+ break;
+ case GITS_TYPER:
+ *data = extract64(s->typer, 0, 32);
+ break;
+ case GITS_TYPER + 4:
+ *data = extract64(s->typer, 32, 32);
+ break;
+ case GITS_CBASER:
+ *data = extract64(s->cbaser, 0, 32);
+ break;
+ case GITS_CBASER + 4:
+ *data = extract64(s->cbaser, 32, 32);
+ break;
+ case GITS_CREADR:
+ *data = extract64(s->creadr, 0, 32);
+ break;
+ case GITS_CREADR + 4:
+ *data = extract64(s->creadr, 32, 32);
+ break;
+ case GITS_CWRITER:
+ *data = extract64(s->cwriter, 0, 32);
+ break;
+ case GITS_CWRITER + 4:
+ *data = extract64(s->cwriter, 32, 32);
+ break;
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ index = (offset - GITS_BASER) / 8;
+ if (offset & 7) {
+ *data = extract64(s->baser[index], 32, 32);
+ } else {
+ *data = extract64(s->baser[index], 0, 32);
+ }
+ break;
+ default:
+ result = false;
+ break;
+ }
return result;
}
@@ -56,7 +350,54 @@ static bool its_writell(GICv3ITSState *s, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
bool result = true;
+ int index;
+ switch (offset) {
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ /*
+ * IMPDEF choice:- GITS_BASERn register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ index = (offset - GITS_BASER) / 8;
+ s->baser[index] &= GITS_BASER_RO_MASK;
+ s->baser[index] |= (value & ~GITS_BASER_RO_MASK);
+ }
+ break;
+ case GITS_CBASER:
+ /*
+ * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is
+ * already enabled
+ */
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ s->cbaser = value;
+ s->creadr = 0;
+ s->cwriter = s->creadr;
+ }
+ break;
+ case GITS_CWRITER:
+ s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK;
+ break;
+ case GITS_CREADR:
+ if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
+ s->creadr = value & ~R_GITS_CREADR_STALLED_MASK;
+ } else {
+ /* RO register, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ }
+ break;
+ case GITS_TYPER:
+ /* RO registers, ignore the write */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid guest write to RO register at offset "
+ TARGET_FMT_plx "\n", __func__, offset);
+ break;
+ default:
+ result = false;
+ break;
+ }
return result;
}
@@ -64,7 +405,29 @@ static bool its_readll(GICv3ITSState *s, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
bool result = true;
+ int index;
+ switch (offset) {
+ case GITS_TYPER:
+ *data = s->typer;
+ break;
+ case GITS_BASER ... GITS_BASER + 0x3f:
+ index = (offset - GITS_BASER) / 8;
+ *data = s->baser[index];
+ break;
+ case GITS_CBASER:
+ *data = s->cbaser;
+ break;
+ case GITS_CREADR:
+ *data = s->creadr;
+ break;
+ case GITS_CWRITER:
+ *data = s->cwriter;
+ break;
+ default:
+ result = false;
+ break;
+ }
return result;
}
@@ -166,6 +529,9 @@ static void gicv3_arm_its_realize(DeviceState *dev, Error **errp)
gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops);
+ address_space_init(&s->gicv3->dma_as, s->gicv3->dma,
+ "gicv3-its-sysmem");
+
/* set the ITS default features supported */
s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL,
GITS_TYPE_PHYSICAL);
@@ -209,6 +575,14 @@ static void gicv3_its_reset(DeviceState *dev)
GITS_CTE_SIZE - 1);
}
+static void gicv3_its_post_load(GICv3ITSState *s)
+{
+ if (s->ctlr & ITS_CTLR_ENABLED) {
+ extract_table_params(s);
+ extract_cmdq_params(s);
+ }
+}
+
static Property gicv3_its_props[] = {
DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3",
GICv3State *),
@@ -219,10 +593,12 @@ static void gicv3_its_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
+ GICv3ITSCommonClass *icc = ARM_GICV3_ITS_COMMON_CLASS(klass);
dc->realize = gicv3_arm_its_realize;
device_class_set_props(dc, gicv3_its_props);
device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset);
+ icc->post_load = gicv3_its_post_load;
}
static const TypeInfo gicv3_its_info = {
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 11/23] hw/intc: GICv3 ITS command queue framework
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2021-09-13 16:11 ` [PULL 10/23] hw/intc: GICv3 ITS register definitions added Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 12/23] hw/intc: GICv3 ITS Command processing Peter Maydell
` (11 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Added functionality to trigger ITS command queue processing on
write to CWRITE register and process each command queue entry to
identify the command type and handle commands like MAPD,MAPC,SYNC.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-4-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/gicv3_internal.h | 40 +++++
hw/intc/arm_gicv3_its.c | 319 +++++++++++++++++++++++++++++++++++++++
2 files changed, 359 insertions(+)
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 92e0a4fa686..034fadfebeb 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -304,6 +304,43 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define L1TABLE_ENTRY_SIZE 8
#define GITS_CMDQ_ENTRY_SIZE 32
+#define NUM_BYTES_IN_DW 8
+
+#define CMD_MASK 0xff
+
+/* ITS Commands */
+#define GITS_CMD_CLEAR 0x04
+#define GITS_CMD_DISCARD 0x0F
+#define GITS_CMD_INT 0x03
+#define GITS_CMD_MAPC 0x09
+#define GITS_CMD_MAPD 0x08
+#define GITS_CMD_MAPI 0x0B
+#define GITS_CMD_MAPTI 0x0A
+#define GITS_CMD_INV 0x0C
+#define GITS_CMD_INVALL 0x0D
+#define GITS_CMD_SYNC 0x05
+
+/* MAPC command fields */
+#define ICID_LENGTH 16
+#define ICID_MASK ((1U << ICID_LENGTH) - 1)
+FIELD(MAPC, RDBASE, 16, 32)
+
+#define RDBASE_PROCNUM_LENGTH 16
+#define RDBASE_PROCNUM_MASK ((1ULL << RDBASE_PROCNUM_LENGTH) - 1)
+
+/* MAPD command fields */
+#define ITTADDR_LENGTH 44
+#define ITTADDR_SHIFT 8
+#define ITTADDR_MASK MAKE_64BIT_MASK(ITTADDR_SHIFT, ITTADDR_LENGTH)
+#define SIZE_MASK 0x1f
+
+#define DEVID_SHIFT 32
+#define DEVID_MASK MAKE_64BIT_MASK(32, 32)
+
+#define VALID_SHIFT 63
+#define CMD_FIELD_VALID_MASK (1ULL << VALID_SHIFT)
+#define L2_TABLE_VALID_MASK CMD_FIELD_VALID_MASK
+#define TABLE_ENTRY_VALID_MASK (1ULL << 0)
/**
* Default features advertised by this version of ITS
@@ -337,6 +374,9 @@ FIELD(GITS_TYPER, CIL, 36, 1)
* Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits
*/
#define GITS_DTE_SIZE (0x8ULL)
+#define GITS_DTE_ITTADDR_SHIFT 6
+#define GITS_DTE_ITTADDR_MASK MAKE_64BIT_MASK(GITS_DTE_ITTADDR_SHIFT, \
+ ITTADDR_LENGTH)
/*
* 8 bytes Collection Table Entry size
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 8234939ccc1..fcd152271a6 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -50,6 +50,318 @@ static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
return result;
}
+static bool update_cte(GICv3ITSState *s, uint16_t icid, bool valid,
+ uint64_t rdbase)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t value;
+ uint64_t l2t_addr;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+ uint64_t cte = 0;
+ MemTxResult res = MEMTX_OK;
+
+ if (!s->ct.valid) {
+ return true;
+ }
+
+ if (valid) {
+ /* add mapping entry to collection table */
+ cte = (valid & TABLE_ENTRY_VALID_MASK) | (rdbase << 1ULL);
+ }
+
+ /*
+ * The specification defines the format of level 1 entries of a
+ * 2-level table, but the format of level 2 entries and the format
+ * of flat-mapped tables is IMPDEF.
+ */
+ if (s->ct.indirect) {
+ l2t_id = icid / (s->ct.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->ct.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return false;
+ }
+
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->ct.page_sz / s->ct.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ address_space_stq_le(as, l2t_addr +
+ ((icid % max_l2_entries) * GITS_CTE_SIZE),
+ cte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ } else {
+ /* Flat level table */
+ address_space_stq_le(as, s->ct.base_addr + (icid * GITS_CTE_SIZE),
+ cte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ if (res != MEMTX_OK) {
+ return false;
+ } else {
+ return true;
+ }
+}
+
+static bool process_mapc(GICv3ITSState *s, uint32_t offset)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint16_t icid;
+ uint64_t rdbase;
+ bool valid;
+ MemTxResult res = MEMTX_OK;
+ bool result = false;
+ uint64_t value;
+
+ offset += NUM_BYTES_IN_DW;
+ offset += NUM_BYTES_IN_DW;
+
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+
+ icid = value & ICID_MASK;
+
+ rdbase = (value & R_MAPC_RDBASE_MASK) >> R_MAPC_RDBASE_SHIFT;
+ rdbase &= RDBASE_PROCNUM_MASK;
+
+ valid = (value & CMD_FIELD_VALID_MASK);
+
+ if ((icid > s->ct.maxids.max_collids) || (rdbase > s->gicv3->num_cpu)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ITS MAPC: invalid collection table attributes "
+ "icid %d rdbase %lu\n", icid, rdbase);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ result = update_cte(s, icid, valid, rdbase);
+ }
+
+ return result;
+}
+
+static bool update_dte(GICv3ITSState *s, uint32_t devid, bool valid,
+ uint8_t size, uint64_t itt_addr)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t value;
+ uint64_t l2t_addr;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+ uint64_t dte = 0;
+ MemTxResult res = MEMTX_OK;
+
+ if (s->dt.valid) {
+ if (valid) {
+ /* add mapping entry to device table */
+ dte = (valid & TABLE_ENTRY_VALID_MASK) |
+ ((size & SIZE_MASK) << 1U) |
+ (itt_addr << GITS_DTE_ITTADDR_SHIFT);
+ }
+ } else {
+ return true;
+ }
+
+ /*
+ * The specification defines the format of level 1 entries of a
+ * 2-level table, but the format of level 2 entries and the format
+ * of flat-mapped tables is IMPDEF.
+ */
+ if (s->dt.indirect) {
+ l2t_id = devid / (s->dt.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->dt.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return false;
+ }
+
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->dt.page_sz / s->dt.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ address_space_stq_le(as, l2t_addr +
+ ((devid % max_l2_entries) * GITS_DTE_SIZE),
+ dte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ } else {
+ /* Flat level table */
+ address_space_stq_le(as, s->dt.base_addr + (devid * GITS_DTE_SIZE),
+ dte, MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ if (res != MEMTX_OK) {
+ return false;
+ } else {
+ return true;
+ }
+}
+
+static bool process_mapd(GICv3ITSState *s, uint64_t value, uint32_t offset)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint32_t devid;
+ uint8_t size;
+ uint64_t itt_addr;
+ bool valid;
+ MemTxResult res = MEMTX_OK;
+ bool result = false;
+
+ devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+
+ size = (value & SIZE_MASK);
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+
+ itt_addr = (value & ITTADDR_MASK) >> ITTADDR_SHIFT;
+
+ valid = (value & CMD_FIELD_VALID_MASK);
+
+ if ((devid > s->dt.maxids.max_devids) ||
+ (size > FIELD_EX64(s->typer, GITS_TYPER, IDBITS))) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ITS MAPD: invalid device table attributes "
+ "devid %d or size %d\n", devid, size);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ result = update_dte(s, devid, valid, size, itt_addr);
+ }
+
+ return result;
+}
+
+/*
+ * Current implementation blocks until all
+ * commands are processed
+ */
+static void process_cmdq(GICv3ITSState *s)
+{
+ uint32_t wr_offset = 0;
+ uint32_t rd_offset = 0;
+ uint32_t cq_offset = 0;
+ uint64_t data;
+ AddressSpace *as = &s->gicv3->dma_as;
+ MemTxResult res = MEMTX_OK;
+ bool result = true;
+ uint8_t cmd;
+
+ if (!(s->ctlr & ITS_CTLR_ENABLED)) {
+ return;
+ }
+
+ wr_offset = FIELD_EX64(s->cwriter, GITS_CWRITER, OFFSET);
+
+ if (wr_offset > s->cq.max_entries) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid write offset "
+ "%d\n", __func__, wr_offset);
+ return;
+ }
+
+ rd_offset = FIELD_EX64(s->creadr, GITS_CREADR, OFFSET);
+
+ if (rd_offset > s->cq.max_entries) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid read offset "
+ "%d\n", __func__, rd_offset);
+ return;
+ }
+
+ while (wr_offset != rd_offset) {
+ cq_offset = (rd_offset * GITS_CMDQ_ENTRY_SIZE);
+ data = address_space_ldq_le(as, s->cq.base_addr + cq_offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ if (res != MEMTX_OK) {
+ result = false;
+ }
+ cmd = (data & CMD_MASK);
+
+ switch (cmd) {
+ case GITS_CMD_INT:
+ break;
+ case GITS_CMD_CLEAR:
+ break;
+ case GITS_CMD_SYNC:
+ /*
+ * Current implementation makes a blocking synchronous call
+ * for every command issued earlier, hence the internal state
+ * is already consistent by the time SYNC command is executed.
+ * Hence no further processing is required for SYNC command.
+ */
+ break;
+ case GITS_CMD_MAPD:
+ result = process_mapd(s, data, cq_offset);
+ break;
+ case GITS_CMD_MAPC:
+ result = process_mapc(s, cq_offset);
+ break;
+ case GITS_CMD_MAPTI:
+ break;
+ case GITS_CMD_MAPI:
+ break;
+ case GITS_CMD_DISCARD:
+ break;
+ case GITS_CMD_INV:
+ case GITS_CMD_INVALL:
+ break;
+ default:
+ break;
+ }
+ if (result) {
+ rd_offset++;
+ rd_offset %= s->cq.max_entries;
+ s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, OFFSET, rd_offset);
+ } else {
+ /*
+ * in this implementation, in case of dma read/write error
+ * we stall the command processing
+ */
+ s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, STALLED, 1);
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: %x cmd processing failed\n", __func__, cmd);
+ break;
+ }
+ }
+}
+
/*
* This function extracts the ITS Device and Collection table specific
* parameters (like base_addr, size etc) from GITS_BASER register.
@@ -204,6 +516,7 @@ static bool its_writel(GICv3ITSState *s, hwaddr offset,
extract_table_params(s);
extract_cmdq_params(s);
s->creadr = 0;
+ process_cmdq(s);
}
break;
case GITS_CBASER:
@@ -231,6 +544,9 @@ static bool its_writel(GICv3ITSState *s, hwaddr offset,
case GITS_CWRITER:
s->cwriter = deposit64(s->cwriter, 0, 32,
(value & ~R_GITS_CWRITER_RETRY_MASK));
+ if (s->cwriter != s->creadr) {
+ process_cmdq(s);
+ }
break;
case GITS_CWRITER + 4:
s->cwriter = deposit64(s->cwriter, 32, 32, value);
@@ -377,6 +693,9 @@ static bool its_writell(GICv3ITSState *s, hwaddr offset,
break;
case GITS_CWRITER:
s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK;
+ if (s->cwriter != s->creadr) {
+ process_cmdq(s);
+ }
break;
case GITS_CREADR:
if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) {
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 12/23] hw/intc: GICv3 ITS Command processing
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2021-09-13 16:11 ` [PULL 11/23] hw/intc: GICv3 ITS command queue framework Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 13/23] hw/intc: GICv3 ITS Feature enablement Peter Maydell
` (10 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Added ITS command queue handling for MAPTI,MAPI commands,handled ITS
translation which triggers an LPI via INT command as well as write
to GITS_TRANSLATER register,defined enum to differentiate between ITS
command interrupt trigger and GITS_TRANSLATER based interrupt trigger.
Each of these commands make use of other functionalities implemented to
get device table entry,collection table entry or interrupt translation
table entry required for their processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-5-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/gicv3_internal.h | 12 +
include/hw/intc/arm_gicv3_common.h | 2 +
hw/intc/arm_gicv3_its.c | 365 ++++++++++++++++++++++++++++-
3 files changed, 378 insertions(+), 1 deletion(-)
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 034fadfebeb..19664447902 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -334,6 +334,13 @@ FIELD(MAPC, RDBASE, 16, 32)
#define ITTADDR_MASK MAKE_64BIT_MASK(ITTADDR_SHIFT, ITTADDR_LENGTH)
#define SIZE_MASK 0x1f
+/* MAPI command fields */
+#define EVENTID_MASK ((1ULL << 32) - 1)
+
+/* MAPTI command fields */
+#define pINTID_SHIFT 32
+#define pINTID_MASK MAKE_64BIT_MASK(32, 32)
+
#define DEVID_SHIFT 32
#define DEVID_MASK MAKE_64BIT_MASK(32, 32)
@@ -359,6 +366,11 @@ FIELD(MAPC, RDBASE, 16, 32)
* Values: | vPEID | ICID |
*/
#define ITS_ITT_ENTRY_SIZE 0xC
+#define ITE_ENTRY_INTTYPE_SHIFT 1
+#define ITE_ENTRY_INTID_SHIFT 2
+#define ITE_ENTRY_INTID_MASK MAKE_64BIT_MASK(2, 24)
+#define ITE_ENTRY_INTSP_SHIFT 26
+#define ITE_ENTRY_ICID_MASK MAKE_64BIT_MASK(0, 16)
/* 16 bits EventId */
#define ITS_IDBITS GICD_TYPER_IDBITS
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index 1fd5cedbbdb..0715b0bc2a7 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -36,6 +36,8 @@
#define GICV3_MAXIRQ 1020
#define GICV3_MAXSPI (GICV3_MAXIRQ - GIC_INTERNAL)
+#define GICV3_LPI_INTID_START 8192
+
#define GICV3_REDIST_SIZE 0x20000
/* Number of SGI target-list bits */
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index fcd152271a6..03c68009978 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -29,6 +29,22 @@ struct GICv3ITSClass {
void (*parent_reset)(DeviceState *dev);
};
+/*
+ * This is an internal enum used to distinguish between LPI triggered
+ * via command queue and LPI triggered via gits_translater write.
+ */
+typedef enum ItsCmdType {
+ NONE = 0, /* internal indication for GITS_TRANSLATER write */
+ CLEAR = 1,
+ DISCARD = 2,
+ INT = 3,
+} ItsCmdType;
+
+typedef struct {
+ uint32_t iteh;
+ uint64_t itel;
+} IteEntry;
+
static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
{
uint64_t result = 0;
@@ -50,6 +66,329 @@ static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
return result;
}
+static bool get_cte(GICv3ITSState *s, uint16_t icid, uint64_t *cte,
+ MemTxResult *res)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t l2t_addr;
+ uint64_t value;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+
+ if (s->ct.indirect) {
+ l2t_id = icid / (s->ct.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->ct.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+
+ if (*res == MEMTX_OK) {
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->ct.page_sz / s->ct.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ *cte = address_space_ldq_le(as, l2t_addr +
+ ((icid % max_l2_entries) * GITS_CTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+ }
+ } else {
+ /* Flat level table */
+ *cte = address_space_ldq_le(as, s->ct.base_addr +
+ (icid * GITS_CTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+
+ return (*cte & TABLE_ENTRY_VALID_MASK) != 0;
+}
+
+static bool update_ite(GICv3ITSState *s, uint32_t eventid, uint64_t dte,
+ IteEntry ite)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t itt_addr;
+ MemTxResult res = MEMTX_OK;
+
+ itt_addr = (dte & GITS_DTE_ITTADDR_MASK) >> GITS_DTE_ITTADDR_SHIFT;
+ itt_addr <<= ITTADDR_SHIFT; /* 256 byte aligned */
+
+ address_space_stq_le(as, itt_addr + (eventid * (sizeof(uint64_t) +
+ sizeof(uint32_t))), ite.itel, MEMTXATTRS_UNSPECIFIED,
+ &res);
+
+ if (res == MEMTX_OK) {
+ address_space_stl_le(as, itt_addr + (eventid * (sizeof(uint64_t) +
+ sizeof(uint32_t))) + sizeof(uint32_t), ite.iteh,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ }
+ if (res != MEMTX_OK) {
+ return false;
+ } else {
+ return true;
+ }
+}
+
+static bool get_ite(GICv3ITSState *s, uint32_t eventid, uint64_t dte,
+ uint16_t *icid, uint32_t *pIntid, MemTxResult *res)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t itt_addr;
+ bool status = false;
+ IteEntry ite = {};
+
+ itt_addr = (dte & GITS_DTE_ITTADDR_MASK) >> GITS_DTE_ITTADDR_SHIFT;
+ itt_addr <<= ITTADDR_SHIFT; /* 256 byte aligned */
+
+ ite.itel = address_space_ldq_le(as, itt_addr +
+ (eventid * (sizeof(uint64_t) +
+ sizeof(uint32_t))), MEMTXATTRS_UNSPECIFIED,
+ res);
+
+ if (*res == MEMTX_OK) {
+ ite.iteh = address_space_ldl_le(as, itt_addr +
+ (eventid * (sizeof(uint64_t) +
+ sizeof(uint32_t))) + sizeof(uint32_t),
+ MEMTXATTRS_UNSPECIFIED, res);
+
+ if (*res == MEMTX_OK) {
+ if (ite.itel & TABLE_ENTRY_VALID_MASK) {
+ if ((ite.itel >> ITE_ENTRY_INTTYPE_SHIFT) &
+ GITS_TYPE_PHYSICAL) {
+ *pIntid = (ite.itel & ITE_ENTRY_INTID_MASK) >>
+ ITE_ENTRY_INTID_SHIFT;
+ *icid = ite.iteh & ITE_ENTRY_ICID_MASK;
+ status = true;
+ }
+ }
+ }
+ }
+ return status;
+}
+
+static uint64_t get_dte(GICv3ITSState *s, uint32_t devid, MemTxResult *res)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint64_t l2t_addr;
+ uint64_t value;
+ bool valid_l2t;
+ uint32_t l2t_id;
+ uint32_t max_l2_entries;
+
+ if (s->dt.indirect) {
+ l2t_id = devid / (s->dt.page_sz / L1TABLE_ENTRY_SIZE);
+
+ value = address_space_ldq_le(as,
+ s->dt.base_addr +
+ (l2t_id * L1TABLE_ENTRY_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+
+ if (*res == MEMTX_OK) {
+ valid_l2t = (value & L2_TABLE_VALID_MASK) != 0;
+
+ if (valid_l2t) {
+ max_l2_entries = s->dt.page_sz / s->dt.entry_sz;
+
+ l2t_addr = value & ((1ULL << 51) - 1);
+
+ value = address_space_ldq_le(as, l2t_addr +
+ ((devid % max_l2_entries) * GITS_DTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+ }
+ } else {
+ /* Flat level table */
+ value = address_space_ldq_le(as, s->dt.base_addr +
+ (devid * GITS_DTE_SIZE),
+ MEMTXATTRS_UNSPECIFIED, res);
+ }
+
+ return value;
+}
+
+/*
+ * This function handles the processing of following commands based on
+ * the ItsCmdType parameter passed:-
+ * 1. triggering of lpi interrupt translation via ITS INT command
+ * 2. triggering of lpi interrupt translation via gits_translater register
+ * 3. handling of ITS CLEAR command
+ * 4. handling of ITS DISCARD command
+ */
+static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset,
+ ItsCmdType cmd)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint32_t devid, eventid;
+ MemTxResult res = MEMTX_OK;
+ bool dte_valid;
+ uint64_t dte = 0;
+ uint32_t max_eventid;
+ uint16_t icid = 0;
+ uint32_t pIntid = 0;
+ bool ite_valid = false;
+ uint64_t cte = 0;
+ bool cte_valid = false;
+ bool result = false;
+
+ if (cmd == NONE) {
+ devid = offset;
+ } else {
+ devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+ }
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+
+ eventid = (value & EVENTID_MASK);
+
+ dte = get_dte(s, devid, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+ dte_valid = dte & TABLE_ENTRY_VALID_MASK;
+
+ if (dte_valid) {
+ max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1));
+
+ ite_valid = get_ite(s, eventid, dte, &icid, &pIntid, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+
+ if (ite_valid) {
+ cte_valid = get_cte(s, icid, &cte, &res);
+ }
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+ }
+
+ if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid ||
+ !cte_valid || (eventid > max_eventid)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid command attributes "
+ "devid %d or eventid %d or invalid dte %d or"
+ "invalid cte %d or invalid ite %d\n",
+ __func__, devid, eventid, dte_valid, cte_valid,
+ ite_valid);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ /*
+ * Current implementation only supports rdbase == procnum
+ * Hence rdbase physical address is ignored
+ */
+ if (cmd == DISCARD) {
+ IteEntry ite = {};
+ /* remove mapping from interrupt translation table */
+ result = update_ite(s, eventid, dte, ite);
+ }
+ }
+
+ return result;
+}
+
+static bool process_mapti(GICv3ITSState *s, uint64_t value, uint32_t offset,
+ bool ignore_pInt)
+{
+ AddressSpace *as = &s->gicv3->dma_as;
+ uint32_t devid, eventid;
+ uint32_t pIntid = 0;
+ uint32_t max_eventid, max_Intid;
+ bool dte_valid;
+ MemTxResult res = MEMTX_OK;
+ uint16_t icid = 0;
+ uint64_t dte = 0;
+ IteEntry ite;
+ uint32_t int_spurious = INTID_SPURIOUS;
+ bool result = false;
+
+ devid = ((value & DEVID_MASK) >> DEVID_SHIFT);
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+
+ eventid = (value & EVENTID_MASK);
+
+ if (!ignore_pInt) {
+ pIntid = ((value & pINTID_MASK) >> pINTID_SHIFT);
+ }
+
+ offset += NUM_BYTES_IN_DW;
+ value = address_space_ldq_le(as, s->cq.base_addr + offset,
+ MEMTXATTRS_UNSPECIFIED, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+
+ icid = value & ICID_MASK;
+
+ dte = get_dte(s, devid, &res);
+
+ if (res != MEMTX_OK) {
+ return result;
+ }
+ dte_valid = dte & TABLE_ENTRY_VALID_MASK;
+
+ max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1));
+
+ if (!ignore_pInt) {
+ max_Intid = (1ULL << (GICD_TYPER_IDBITS + 1)) - 1;
+ }
+
+ if ((devid > s->dt.maxids.max_devids) || (icid > s->ct.maxids.max_collids)
+ || !dte_valid || (eventid > max_eventid) ||
+ (!ignore_pInt && (((pIntid < GICV3_LPI_INTID_START) ||
+ (pIntid > max_Intid)) && (pIntid != INTID_SPURIOUS)))) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid command attributes "
+ "devid %d or icid %d or eventid %d or pIntid %d or"
+ "unmapped dte %d\n", __func__, devid, icid, eventid,
+ pIntid, dte_valid);
+ /*
+ * in this implementation, in case of error
+ * we ignore this command and move onto the next
+ * command in the queue
+ */
+ } else {
+ /* add ite entry to interrupt translation table */
+ ite.itel = (dte_valid & TABLE_ENTRY_VALID_MASK) |
+ (GITS_TYPE_PHYSICAL << ITE_ENTRY_INTTYPE_SHIFT);
+
+ if (ignore_pInt) {
+ ite.itel |= (eventid << ITE_ENTRY_INTID_SHIFT);
+ } else {
+ ite.itel |= (pIntid << ITE_ENTRY_INTID_SHIFT);
+ }
+ ite.itel |= (int_spurious << ITE_ENTRY_INTSP_SHIFT);
+ ite.iteh = icid;
+
+ result = update_ite(s, eventid, dte, ite);
+ }
+
+ return result;
+}
+
static bool update_cte(GICv3ITSState *s, uint16_t icid, bool valid,
uint64_t rdbase)
{
@@ -316,8 +655,10 @@ static void process_cmdq(GICv3ITSState *s)
switch (cmd) {
case GITS_CMD_INT:
+ res = process_its_cmd(s, data, cq_offset, INT);
break;
case GITS_CMD_CLEAR:
+ res = process_its_cmd(s, data, cq_offset, CLEAR);
break;
case GITS_CMD_SYNC:
/*
@@ -334,10 +675,13 @@ static void process_cmdq(GICv3ITSState *s)
result = process_mapc(s, cq_offset);
break;
case GITS_CMD_MAPTI:
+ result = process_mapti(s, data, cq_offset, false);
break;
case GITS_CMD_MAPI:
+ result = process_mapti(s, data, cq_offset, true);
break;
case GITS_CMD_DISCARD:
+ result = process_its_cmd(s, data, cq_offset, DISCARD);
break;
case GITS_CMD_INV:
case GITS_CMD_INVALL:
@@ -499,7 +843,26 @@ static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset,
uint64_t data, unsigned size,
MemTxAttrs attrs)
{
- return MEMTX_OK;
+ GICv3ITSState *s = (GICv3ITSState *)opaque;
+ bool result = true;
+ uint32_t devid = 0;
+
+ switch (offset) {
+ case GITS_TRANSLATER:
+ if (s->ctlr & ITS_CTLR_ENABLED) {
+ devid = attrs.requester_id;
+ result = process_its_cmd(s, data, devid, NONE);
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (result) {
+ return MEMTX_OK;
+ } else {
+ return MEMTX_ERROR;
+ }
}
static bool its_writel(GICv3ITSState *s, hwaddr offset,
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 13/23] hw/intc: GICv3 ITS Feature enablement
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2021-09-13 16:11 ` [PULL 12/23] hw/intc: GICv3 ITS Command processing Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 14/23] hw/intc: GICv3 redistributor ITS processing Peter Maydell
` (9 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Added properties to enable ITS feature and define qemu system
address space memory in gicv3 common,setup distributor and
redistributor registers to indicate LPI support.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-6-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/gicv3_internal.h | 2 ++
include/hw/intc/arm_gicv3_common.h | 1 +
hw/intc/arm_gicv3_common.c | 12 ++++++++++++
hw/intc/arm_gicv3_dist.c | 5 ++++-
hw/intc/arm_gicv3_redist.c | 12 +++++++++---
5 files changed, 28 insertions(+), 4 deletions(-)
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 19664447902..530d1c17897 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -68,6 +68,8 @@
#define GICD_CTLR_E1NWF (1U << 7)
#define GICD_CTLR_RWP (1U << 31)
+#define GICD_TYPER_LPIS_SHIFT 17
+
/* 16 bits EventId */
#define GICD_TYPER_IDBITS 0xf
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index 0715b0bc2a7..c1348cc60a1 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -221,6 +221,7 @@ struct GICv3State {
uint32_t num_cpu;
uint32_t num_irq;
uint32_t revision;
+ bool lpi_enable;
bool security_extn;
bool irq_reset_nonsecure;
bool gicd_no_migration_shift_bug;
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 58ef65f589e..53dea2a7756 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -345,6 +345,11 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
return;
}
+ if (s->lpi_enable && !s->dma) {
+ error_setg(errp, "Redist-ITS: Guest 'sysmem' reference link not set");
+ return;
+ }
+
s->cpu = g_new0(GICv3CPUState, s->num_cpu);
for (i = 0; i < s->num_cpu; i++) {
@@ -381,6 +386,10 @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
(1 << 24) |
(i << 8) |
(last << 4);
+
+ if (s->lpi_enable) {
+ s->cpu[i].gicr_typer |= GICR_TYPER_PLPIS;
+ }
}
}
@@ -494,9 +503,12 @@ static Property arm_gicv3_common_properties[] = {
DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
+ DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
DEFINE_PROP_ARRAY("redist-region-count", GICv3State, nb_redist_regions,
redist_region_count, qdev_prop_uint32, uint32_t),
+ DEFINE_PROP_LINK("sysmem", GICv3State, dma, TYPE_MEMORY_REGION,
+ MemoryRegion *),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index 5beb7c4235a..4164500ea96 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -384,7 +384,9 @@ static bool gicd_readl(GICv3State *s, hwaddr offset,
* A3V == 1 (non-zero values of Affinity level 3 supported)
* IDbits == 0xf (we support 16-bit interrupt identifiers)
* DVIS == 0 (Direct virtual LPI injection not supported)
- * LPIS == 0 (LPIs not supported)
+ * LPIS == 1 (LPIs are supported if affinity routing is enabled)
+ * num_LPIs == 0b00000 (bits [15:11],Number of LPIs as indicated
+ * by GICD_TYPER.IDbits)
* MBIS == 0 (message-based SPIs not supported)
* SecurityExtn == 1 if security extns supported
* CPUNumber == 0 since for us ARE is always 1
@@ -399,6 +401,7 @@ static bool gicd_readl(GICv3State *s, hwaddr offset,
bool sec_extn = !(s->gicd_ctlr & GICD_CTLR_DS);
*data = (1 << 25) | (1 << 24) | (sec_extn << 10) |
+ (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) |
(0xf << 19) | itlinesnumber;
return true;
}
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 53da703ed84..2108abfe9c3 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -248,10 +248,16 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
case GICR_CTLR:
/* For our implementation, GICR_TYPER.DPGS is 0 and so all
* the DPG bits are RAZ/WI. We don't do anything asynchronously,
- * so UWP and RWP are RAZ/WI. And GICR_TYPER.LPIS is 0 (we don't
- * implement LPIs) so Enable_LPIs is RES0. So there are no writable
- * bits for us.
+ * so UWP and RWP are RAZ/WI. GICR_TYPER.LPIS is 1 (we
+ * implement LPIs) so Enable_LPIs is programmable.
*/
+ if (cs->gicr_typer & GICR_TYPER_PLPIS) {
+ if (value & GICR_CTLR_ENABLE_LPIS) {
+ cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
+ } else {
+ cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
+ }
+ }
return MEMTX_OK;
case GICR_STATUSR:
/* RAZ/WI for our implementation */
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 14/23] hw/intc: GICv3 redistributor ITS processing
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2021-09-13 16:11 ` [PULL 13/23] hw/intc: GICv3 ITS Feature enablement Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 15/23] tests/data/acpi/virt: Add IORT files for ITS Peter Maydell
` (8 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Implemented lpi processing at redistributor to get lpi config info
from lpi configuration table,determine priority,set pending state in
lpi pending table and forward the lpi to cpuif.Added logic to invoke
redistributor lpi processing with translated LPI which set/clear LPI
from ITS device as part of ITS INT,CLEAR,DISCARD command and
GITS_TRANSLATER processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-7-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/gicv3_internal.h | 9 ++
include/hw/intc/arm_gicv3_common.h | 7 ++
hw/intc/arm_gicv3.c | 14 +++
hw/intc/arm_gicv3_common.c | 1 +
hw/intc/arm_gicv3_cpuif.c | 7 +-
hw/intc/arm_gicv3_its.c | 23 +++++
hw/intc/arm_gicv3_redist.c | 141 +++++++++++++++++++++++++++++
7 files changed, 200 insertions(+), 2 deletions(-)
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 530d1c17897..a0369dace7b 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -140,6 +140,8 @@ FIELD(GICR_PENDBASER, PHYADDR, 16, 36)
FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3)
FIELD(GICR_PENDBASER, PTZ, 62, 1)
+#define GICR_PROPBASER_IDBITS_THRESHOLD 0xd
+
#define ICC_CTLR_EL1_CBPR (1U << 0)
#define ICC_CTLR_EL1_EOIMODE (1U << 1)
#define ICC_CTLR_EL1_PMHE (1U << 6)
@@ -305,6 +307,9 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define L1TABLE_ENTRY_SIZE 8
+#define LPI_CTE_ENABLED TABLE_ENTRY_VALID_MASK
+#define LPI_PRIORITY_MASK 0xfc
+
#define GITS_CMDQ_ENTRY_SIZE 32
#define NUM_BYTES_IN_DW 8
@@ -397,6 +402,7 @@ FIELD(MAPC, RDBASE, 16, 32)
* Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
*/
#define GITS_CTE_SIZE (0x8ULL)
+#define GITS_CTE_RDBASE_PROCNUM_MASK MAKE_64BIT_MASK(1, RDBASE_PROCNUM_LENGTH)
/* Special interrupt IDs */
#define INTID_SECURE 1020
@@ -455,6 +461,9 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size, MemTxAttrs attrs);
void gicv3_dist_set_irq(GICv3State *s, int irq, int level);
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level);
+void gicv3_redist_update_lpi(GICv3CPUState *cs);
void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns);
void gicv3_init_cpuif(GICv3State *s);
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index c1348cc60a1..aa4f0d67703 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -204,6 +204,13 @@ struct GICv3CPUState {
* real state above; it doesn't need to be migrated.
*/
PendingIrq hppi;
+
+ /*
+ * Cached information recalculated from LPI tables
+ * in guest memory
+ */
+ PendingIrq hpplpi;
+
/* This is temporary working state, to avoid a malloc in gicv3_update() */
bool seenbetter;
};
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index d63f8af604d..3f24707838c 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -165,6 +165,16 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs)
cs->hppi.grp = gicv3_irq_group(cs->gic, cs, cs->hppi.irq);
}
+ if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable &&
+ (cs->hpplpi.prio != 0xff)) {
+ if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) {
+ cs->hppi.irq = cs->hpplpi.irq;
+ cs->hppi.prio = cs->hpplpi.prio;
+ cs->hppi.grp = cs->hpplpi.grp;
+ seenbetter = true;
+ }
+ }
+
/* If the best interrupt we just found would preempt whatever
* was the previous best interrupt before this update, then
* we know it's definitely the best one now.
@@ -339,9 +349,13 @@ static void gicv3_set_irq(void *opaque, int irq, int level)
static void arm_gicv3_post_load(GICv3State *s)
{
+ int i;
/* Recalculate our cached idea of the current highest priority
* pending interrupt, but don't set IRQ or FIQ lines.
*/
+ for (i = 0; i < s->num_cpu; i++) {
+ gicv3_redist_update_lpi(&s->cpu[i]);
+ }
gicv3_full_update_noirqset(s);
/* Repopulate the cache of GICv3CPUState pointers for target CPUs */
gicv3_cache_all_target_cpustates(s);
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 53dea2a7756..223db16feca 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -435,6 +435,7 @@ static void arm_gicv3_common_reset(DeviceState *dev)
memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));
cs->hppi.prio = 0xff;
+ cs->hpplpi.prio = 0xff;
/* State in the CPU interface must *not* be reset here, because it
* is part of the CPU's reset domain, not the GIC device's.
diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c
index a032d505f53..462a35f66eb 100644
--- a/hw/intc/arm_gicv3_cpuif.c
+++ b/hw/intc/arm_gicv3_cpuif.c
@@ -899,10 +899,12 @@ static void icc_activate_irq(GICv3CPUState *cs, int irq)
cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1);
cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
gicv3_redist_update(cs);
- } else {
+ } else if (irq < GICV3_LPI_INTID_START) {
gicv3_gicd_active_set(cs->gic, irq);
gicv3_gicd_pending_clear(cs->gic, irq);
gicv3_update(cs->gic, irq, 1);
+ } else {
+ gicv3_redist_lpi_pending(cs, irq, 0);
}
}
@@ -1318,7 +1320,8 @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
trace_gicv3_icc_eoir_write(is_eoir0 ? 0 : 1,
gicv3_redist_affid(cs), value);
- if (irq >= cs->gic->num_irq) {
+ if ((irq >= cs->gic->num_irq) &&
+ !(cs->gic->lpi_enable && (irq >= GICV3_LPI_INTID_START))) {
/* This handles two cases:
* 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
* to the GICC_EOIR, the GIC ignores that write.
diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
index 03c68009978..efb1b5ecab8 100644
--- a/hw/intc/arm_gicv3_its.c
+++ b/hw/intc/arm_gicv3_its.c
@@ -233,6 +233,7 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset,
uint64_t cte = 0;
bool cte_valid = false;
bool result = false;
+ uint64_t rdbase;
if (cmd == NONE) {
devid = offset;
@@ -293,6 +294,18 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset,
* Current implementation only supports rdbase == procnum
* Hence rdbase physical address is ignored
*/
+ rdbase = (cte & GITS_CTE_RDBASE_PROCNUM_MASK) >> 1U;
+
+ if (rdbase > s->gicv3->num_cpu) {
+ return result;
+ }
+
+ if ((cmd == CLEAR) || (cmd == DISCARD)) {
+ gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 0);
+ } else {
+ gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 1);
+ }
+
if (cmd == DISCARD) {
IteEntry ite = {};
/* remove mapping from interrupt translation table */
@@ -621,6 +634,7 @@ static void process_cmdq(GICv3ITSState *s)
MemTxResult res = MEMTX_OK;
bool result = true;
uint8_t cmd;
+ int i;
if (!(s->ctlr & ITS_CTLR_ENABLED)) {
return;
@@ -685,6 +699,15 @@ static void process_cmdq(GICv3ITSState *s)
break;
case GITS_CMD_INV:
case GITS_CMD_INVALL:
+ /*
+ * Current implementation doesn't cache any ITS tables,
+ * but the calculated lpi priority information. We only
+ * need to trigger lpi priority re-calculation to be in
+ * sync with LPI config table or pending table changes.
+ */
+ for (i = 0; i < s->gicv3->num_cpu; i++) {
+ gicv3_redist_update_lpi(&s->gicv3->cpu[i]);
+ }
break;
default:
break;
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 2108abfe9c3..7072bfcbb1d 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -254,6 +254,9 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
if (cs->gicr_typer & GICR_TYPER_PLPIS) {
if (value & GICR_CTLR_ENABLE_LPIS) {
cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
+ /* Check for any pending interr in pending table */
+ gicv3_redist_update_lpi(cs);
+ gicv3_redist_update(cs);
} else {
cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
}
@@ -532,6 +535,144 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
return r;
}
+static void gicv3_redist_check_lpi_priority(GICv3CPUState *cs, int irq)
+{
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpict_baddr;
+ uint8_t lpite;
+ uint8_t prio;
+
+ lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK;
+
+ address_space_read(as, lpict_baddr + ((irq - GICV3_LPI_INTID_START) *
+ sizeof(lpite)), MEMTXATTRS_UNSPECIFIED, &lpite,
+ sizeof(lpite));
+
+ if (!(lpite & LPI_CTE_ENABLED)) {
+ return;
+ }
+
+ if (cs->gic->gicd_ctlr & GICD_CTLR_DS) {
+ prio = lpite & LPI_PRIORITY_MASK;
+ } else {
+ prio = ((lpite & LPI_PRIORITY_MASK) >> 1) | 0x80;
+ }
+
+ if ((prio < cs->hpplpi.prio) ||
+ ((prio == cs->hpplpi.prio) && (irq <= cs->hpplpi.irq))) {
+ cs->hpplpi.irq = irq;
+ cs->hpplpi.prio = prio;
+ /* LPIs are always non-secure Grp1 interrupts */
+ cs->hpplpi.grp = GICV3_G1NS;
+ }
+}
+
+void gicv3_redist_update_lpi(GICv3CPUState *cs)
+{
+ /*
+ * This function scans the LPI pending table and for each pending
+ * LPI, reads the corresponding entry from LPI configuration table
+ * to extract the priority info and determine if the current LPI
+ * priority is lower than the last computed high priority lpi interrupt.
+ * If yes, replace current LPI as the new high priority lpi interrupt.
+ */
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpipt_baddr;
+ uint32_t pendt_size = 0;
+ uint8_t pend;
+ int i, bit;
+ uint64_t idbits;
+
+ idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ GICD_TYPER_IDBITS);
+
+ if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+ !cs->gicr_pendbaser) {
+ return;
+ }
+
+ cs->hpplpi.prio = 0xff;
+
+ lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+
+ /* Determine the highest priority pending interrupt among LPIs */
+ pendt_size = (1ULL << (idbits + 1));
+
+ for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) {
+ address_space_read(as, lpipt_baddr + i, MEMTXATTRS_UNSPECIFIED, &pend,
+ sizeof(pend));
+
+ while (pend) {
+ bit = ctz32(pend);
+ gicv3_redist_check_lpi_priority(cs, i * 8 + bit);
+ pend &= ~(1 << bit);
+ }
+ }
+}
+
+void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level)
+{
+ /*
+ * This function updates the pending bit in lpi pending table for
+ * the irq being activated or deactivated.
+ */
+ AddressSpace *as = &cs->gic->dma_as;
+ uint64_t lpipt_baddr;
+ bool ispend = false;
+ uint8_t pend;
+
+ /*
+ * get the bit value corresponding to this irq in the
+ * lpi pending table
+ */
+ lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
+
+ address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+ MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+ ispend = extract32(pend, irq % 8, 1);
+
+ /* no change in the value of pending bit, return */
+ if (ispend == level) {
+ return;
+ }
+ pend = deposit32(pend, irq % 8, 1, level ? 1 : 0);
+
+ address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
+ MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
+
+ /*
+ * check if this LPI is better than the current hpplpi, if yes
+ * just set hpplpi.prio and .irq without doing a full rescan
+ */
+ if (level) {
+ gicv3_redist_check_lpi_priority(cs, irq);
+ } else {
+ if (irq == cs->hpplpi.irq) {
+ gicv3_redist_update_lpi(cs);
+ }
+ }
+}
+
+void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level)
+{
+ uint64_t idbits;
+
+ idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
+ GICD_TYPER_IDBITS);
+
+ if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
+ !cs->gicr_pendbaser || (irq > (1ULL << (idbits + 1)) - 1) ||
+ irq < GICV3_LPI_INTID_START) {
+ return;
+ }
+
+ /* set/clear the pending bit for this irq */
+ gicv3_redist_lpi_pending(cs, irq, level);
+
+ gicv3_redist_update(cs);
+}
+
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level)
{
/* Update redistributor state for a change in an external PPI input line */
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 15/23] tests/data/acpi/virt: Add IORT files for ITS
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2021-09-13 16:11 ` [PULL 14/23] hw/intc: GICv3 redistributor ITS processing Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 16/23] hw/arm/virt: add ITS support in virt GIC Peter Maydell
` (7 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Added expected IORT files applicable with latest GICv3
ITS changes.Temporarily differences in these files are
okay.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-8-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/qtest/bios-tables-test-allowed-diff.h | 4 ++++
tests/data/acpi/virt/IORT | 0
tests/data/acpi/virt/IORT.memhp | 0
tests/data/acpi/virt/IORT.numamem | 0
tests/data/acpi/virt/IORT.pxb | 0
5 files changed, 4 insertions(+)
create mode 100644 tests/data/acpi/virt/IORT
create mode 100644 tests/data/acpi/virt/IORT.memhp
create mode 100644 tests/data/acpi/virt/IORT.numamem
create mode 100644 tests/data/acpi/virt/IORT.pxb
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index dfb8523c8bf..2ef211df597 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1 +1,5 @@
/* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/virt/IORT",
+"tests/data/acpi/virt/IORT.memhp",
+"tests/data/acpi/virt/IORT.numamem",
+"tests/data/acpi/virt/IORT.pxb",
diff --git a/tests/data/acpi/virt/IORT b/tests/data/acpi/virt/IORT
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/tests/data/acpi/virt/IORT.memhp b/tests/data/acpi/virt/IORT.memhp
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/tests/data/acpi/virt/IORT.numamem b/tests/data/acpi/virt/IORT.numamem
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/tests/data/acpi/virt/IORT.pxb b/tests/data/acpi/virt/IORT.pxb
new file mode 100644
index 00000000000..e69de29bb2d
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 16/23] hw/arm/virt: add ITS support in virt GIC
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2021-09-13 16:11 ` [PULL 15/23] tests/data/acpi/virt: Add IORT files for ITS Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 17/23] tests/data/acpi/virt: Update IORT files for ITS Peter Maydell
` (6 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Included creation of ITS as part of virt platform GIC
initialization. This Emulated ITS model now co-exists with kvm
ITS and is enabled in absence of kvm irq kernel support in a
platform.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-9-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/virt.h | 2 ++
target/arm/kvm_arm.h | 4 ++--
hw/arm/virt.c | 29 +++++++++++++++++++++++++++--
3 files changed, 31 insertions(+), 4 deletions(-)
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 9661c466996..b461b8d261d 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -120,6 +120,7 @@ struct VirtMachineClass {
MachineClass parent;
bool disallow_affinity_adjustment;
bool no_its;
+ bool no_tcg_its;
bool no_pmu;
bool claim_edge_triggered_timers;
bool smbios_old_sys_ver;
@@ -141,6 +142,7 @@ struct VirtMachineState {
bool highmem;
bool highmem_ecam;
bool its;
+ bool tcg_its;
bool virt;
bool ras;
bool mte;
diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h
index 34f8daa3775..06134549759 100644
--- a/target/arm/kvm_arm.h
+++ b/target/arm/kvm_arm.h
@@ -525,8 +525,8 @@ static inline const char *its_class_name(void)
/* KVM implementation requires this capability */
return kvm_direct_msi_enabled() ? "arm-its-kvm" : NULL;
} else {
- /* Software emulation is not implemented yet */
- return NULL;
+ /* Software emulation based model */
+ return "arm-gicv3-its";
}
}
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 73e9c6bb7cb..1d59f0e59f7 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -584,6 +584,12 @@ static void create_its(VirtMachineState *vms)
const char *itsclass = its_class_name();
DeviceState *dev;
+ if (!strcmp(itsclass, "arm-gicv3-its")) {
+ if (!vms->tcg_its) {
+ itsclass = NULL;
+ }
+ }
+
if (!itsclass) {
/* Do nothing if not supported */
return;
@@ -621,7 +627,7 @@ static void create_v2m(VirtMachineState *vms)
vms->msi_controller = VIRT_MSI_CTRL_GICV2M;
}
-static void create_gic(VirtMachineState *vms)
+static void create_gic(VirtMachineState *vms, MemoryRegion *mem)
{
MachineState *ms = MACHINE(vms);
/* We create a standalone GIC */
@@ -655,6 +661,14 @@ static void create_gic(VirtMachineState *vms)
nb_redist_regions);
qdev_prop_set_uint32(vms->gic, "redist-region-count[0]", redist0_count);
+ if (!kvm_irqchip_in_kernel()) {
+ if (vms->tcg_its) {
+ object_property_set_link(OBJECT(vms->gic), "sysmem",
+ OBJECT(mem), &error_fatal);
+ qdev_prop_set_bit(vms->gic, "has-lpi", true);
+ }
+ }
+
if (nb_redist_regions == 2) {
uint32_t redist1_capacity =
vms->memmap[VIRT_HIGH_GIC_REDIST2].size / GICV3_REDIST_SIZE;
@@ -2039,7 +2053,7 @@ static void machvirt_init(MachineState *machine)
virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem);
- create_gic(vms);
+ create_gic(vms, sysmem);
virt_cpu_post_init(vms, sysmem);
@@ -2742,6 +2756,12 @@ static void virt_instance_init(Object *obj)
} else {
/* Default allows ITS instantiation */
vms->its = true;
+
+ if (vmc->no_tcg_its) {
+ vms->tcg_its = false;
+ } else {
+ vms->tcg_its = true;
+ }
}
/* Default disallows iommu instantiation */
@@ -2791,8 +2811,13 @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 2)
static void virt_machine_6_1_options(MachineClass *mc)
{
+ VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc));
+
virt_machine_6_2_options(mc);
compat_props_add(mc->compat_props, hw_compat_6_1, hw_compat_6_1_len);
+
+ /* qemu ITS was introduced with 6.2 */
+ vmc->no_tcg_its = true;
}
DEFINE_VIRT_MACHINE(6, 1)
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 17/23] tests/data/acpi/virt: Update IORT files for ITS
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2021-09-13 16:11 ` [PULL 16/23] hw/arm/virt: add ITS support in virt GIC Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 18/23] target/arm: Take an exception if PSTATE.IL is set Peter Maydell
` (5 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Shashi Mallela <shashi.mallela@linaro.org>
Updated expected IORT files applicable with latest GICv3
ITS changes.
Full diff of new file disassembly:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180629 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembly of tests/data/acpi/virt/IORT.pxb, Tue Jun 29 17:35:38 2021
*
* ACPI Data Table [IORT]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "IORT" [IO Remapping Table]
[004h 0004 4] Table Length : 0000007C
[008h 0008 1] Revision : 00
[009h 0009 1] Checksum : 07
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 4] Node Count : 00000002
[028h 0040 4] Node Offset : 00000030
[02Ch 0044 4] Reserved : 00000000
[030h 0048 1] Type : 00
[031h 0049 2] Length : 0018
[033h 0051 1] Revision : 00
[034h 0052 4] Reserved : 00000000
[038h 0056 4] Mapping Count : 00000000
[03Ch 0060 4] Mapping Offset : 00000000
[040h 0064 4] ItsCount : 00000001
[044h 0068 4] Identifiers : 00000000
[048h 0072 1] Type : 02
[049h 0073 2] Length : 0034
[04Bh 0075 1] Revision : 00
[04Ch 0076 4] Reserved : 00000000
[050h 0080 4] Mapping Count : 00000001
[054h 0084 4] Mapping Offset : 00000020
[058h 0088 8] Memory Properties : [IORT Memory Access Properties]
[058h 0088 4] Cache Coherency : 00000001
[05Ch 0092 1] Hints (decoded below) : 00
Transient : 0
Write Allocate : 0
Read Allocate : 0
Override : 0
[05Dh 0093 2] Reserved : 0000
[05Fh 0095 1] Memory Flags (decoded below) : 03
Coherency : 1
Device Attribute : 1
[060h 0096 4] ATS Attribute : 00000000
[064h 0100 4] PCI Segment Number : 00000000
[068h 0104 1] Memory Size Limit : 00
[069h 0105 3] Reserved : 000000
[068h 0104 4] Input base : 00000000
[06Ch 0108 4] ID Count : 0000FFFF
[070h 0112 4] Output Base : 00000000
[074h 0116 4] Output Reference : 00000030
[078h 0120 4] Flags (decoded below) : 00000000
Single Mapping : 0
Raw Table Data: Length 124 (0x7C)
0000: 49 4F 52 54 7C 00 00 00 00 07 42 4F 43 48 53 20 // IORT|.....BOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 02 00 00 00 30 00 00 00 00 00 00 00 // ........0.......
0030: 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0040: 01 00 00 00 00 00 00 00 02 34 00 00 00 00 00 00 // .........4......
0050: 01 00 00 00 20 00 00 00 01 00 00 00 00 00 00 03 // .... ...........
0060: 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 00 00 // ................
0070: 00 00 00 00 30 00 00 00 00 00 00 00 // ....0.......
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-10-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/qtest/bios-tables-test-allowed-diff.h | 4 ----
tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes
tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes
5 files changed, 4 deletions(-)
diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index 2ef211df597..dfb8523c8bf 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1,5 +1 @@
/* List of comma-separated changed AML files to ignore */
-"tests/data/acpi/virt/IORT",
-"tests/data/acpi/virt/IORT.memhp",
-"tests/data/acpi/virt/IORT.numamem",
-"tests/data/acpi/virt/IORT.pxb",
diff --git a/tests/data/acpi/virt/IORT b/tests/data/acpi/virt/IORT
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/virt/IORT.memhp b/tests/data/acpi/virt/IORT.memhp
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/virt/IORT.numamem b/tests/data/acpi/virt/IORT.numamem
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
diff --git a/tests/data/acpi/virt/IORT.pxb b/tests/data/acpi/virt/IORT.pxb
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..521acefe9ba66706c5607321a82d330586f3f280 100644
GIT binary patch
literal 124
zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0#
QRGb+i3L*dhhtM#y0PN=p0RR91
literal 0
HcmV?d00001
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 18/23] target/arm: Take an exception if PSTATE.IL is set
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2021-09-13 16:11 ` [PULL 17/23] tests/data/acpi/virt: Update IORT files for ITS Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 19/23] target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn Peter Maydell
` (4 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
In v8A, the PSTATE.IL bit is set for various kinds of illegal
exception return or mode-change attempts. We already set PSTATE.IL
(or its AArch32 equivalent CPSR.IL) in all those cases, but we
weren't implementing the part of the behaviour where attempting to
execute an instruction with PSTATE.IL takes an immediate exception
with an appropriate syndrome value.
Add a new TB flags bit tracking PSTATE.IL/CPSR.IL, and generate code
to take an exception instead of whatever the instruction would have
been.
PSTATE.IL and CPSR.IL change only on exception entry, attempted
exception exit, and various AArch32 mode changes via cpsr_write().
These places generally already rebuild the hflags, so the only place
we need an extra rebuild_hflags call is in the illegal-return
codepath of the AArch64 exception_return helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210821195958.41312-2-richard.henderson@linaro.org
Message-Id: <20210817162118.24319-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Added missing returns; set IL bit in syndrome]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/cpu.h | 1 +
target/arm/syndrome.h | 5 +++++
target/arm/translate.h | 2 ++
target/arm/helper-a64.c | 1 +
target/arm/helper.c | 8 ++++++++
target/arm/translate-a64.c | 11 +++++++++++
target/arm/translate.c | 21 +++++++++++++++++++++
7 files changed, 49 insertions(+)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 6a987f65e41..fb0ef1ee2c9 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -3455,6 +3455,7 @@ FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2)
FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 10, 2)
/* Memory operations require alignment: SCTLR_ELx.A or CCR.UNALIGN_TRP */
FIELD(TBFLAG_ANY, ALIGN_MEM, 12, 1)
+FIELD(TBFLAG_ANY, PSTATE__IL, 13, 1)
/*
* Bit usage when in AArch32 state, both A- and M-profile.
diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h
index 8dd88a0cb17..f30f4130a27 100644
--- a/target/arm/syndrome.h
+++ b/target/arm/syndrome.h
@@ -277,4 +277,9 @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit)
(cv << 24) | (cond << 20) | ti;
}
+static inline uint32_t syn_illegalstate(void)
+{
+ return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL;
+}
+
#endif /* TARGET_ARM_SYNDROME_H */
diff --git a/target/arm/translate.h b/target/arm/translate.h
index 8636c20c3b4..605d1f2e33d 100644
--- a/target/arm/translate.h
+++ b/target/arm/translate.h
@@ -98,6 +98,8 @@ typedef struct DisasContext {
bool hstr_active;
/* True if memory operations require alignment */
bool align_mem;
+ /* True if PSTATE.IL is set */
+ bool pstate_il;
/*
* >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI.
* < 0, set by the current instruction.
diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c
index 26f79f9141a..19445b3c947 100644
--- a/target/arm/helper-a64.c
+++ b/target/arm/helper-a64.c
@@ -1071,6 +1071,7 @@ illegal_return:
if (!arm_singlestep_active(env)) {
env->pstate &= ~PSTATE_SS;
}
+ helper_rebuild_hflags_a64(env, cur_el);
qemu_log_mask(LOG_GUEST_ERROR, "Illegal exception return at EL%d: "
"resuming execution at 0x%" PRIx64 "\n", cur_el, env->pc);
}
diff --git a/target/arm/helper.c b/target/arm/helper.c
index a7ae78146d4..b210da2bc26 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -13462,6 +13462,10 @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el,
DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1);
}
+ if (env->uncached_cpsr & CPSR_IL) {
+ DP_TBFLAG_ANY(flags, PSTATE__IL, 1);
+ }
+
return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags);
}
@@ -13556,6 +13560,10 @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el,
}
}
+ if (env->pstate & PSTATE_IL) {
+ DP_TBFLAG_ANY(flags, PSTATE__IL, 1);
+ }
+
if (cpu_isar_feature(aa64_mte, env_archcpu(env))) {
/*
* Set MTE_ACTIVE if any access may be Checked, and leave clear
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 422e2ac0c96..230cc8d83bf 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -14662,6 +14662,16 @@ static void disas_a64_insn(CPUARMState *env, DisasContext *s)
s->fp_access_checked = false;
s->sve_access_checked = false;
+ if (s->pstate_il) {
+ /*
+ * Illegal execution state. This has priority over BTI
+ * exceptions, but comes after instruction abort exceptions.
+ */
+ gen_exception_insn(s, s->pc_curr, EXCP_UDEF,
+ syn_illegalstate(), default_exception_el(s));
+ return;
+ }
+
if (dc_isar_feature(aa64_bti, s)) {
if (s->base.num_insns == 1) {
/*
@@ -14780,6 +14790,7 @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase,
#endif
dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL);
dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM);
+ dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL);
dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL);
dc->sve_len = (EX_TBFLAG_A64(tb_flags, ZCR_LEN) + 1) * 16;
dc->pauth_active = EX_TBFLAG_A64(tb_flags, PAUTH_ACTIVE);
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 24b7f49d767..435c6597239 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -9090,6 +9090,16 @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
return;
}
+ if (s->pstate_il) {
+ /*
+ * Illegal execution state. This has priority over BTI
+ * exceptions, but comes after instruction abort exceptions.
+ */
+ gen_exception_insn(s, s->pc_curr, EXCP_UDEF,
+ syn_illegalstate(), default_exception_el(s));
+ return;
+ }
+
if (cond == 0xf) {
/* In ARMv3 and v4 the NV condition is UNPREDICTABLE; we
* choose to UNDEF. In ARMv5 and above the space is used
@@ -9358,6 +9368,7 @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
#endif
dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL);
dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM);
+ dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL);
if (arm_feature(env, ARM_FEATURE_M)) {
dc->vfp_enabled = 1;
@@ -9621,6 +9632,16 @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
}
dc->insn = insn;
+ if (dc->pstate_il) {
+ /*
+ * Illegal execution state. This has priority over BTI
+ * exceptions, but comes after instruction abort exceptions.
+ */
+ gen_exception_insn(dc, dc->pc_curr, EXCP_UDEF,
+ syn_illegalstate(), default_exception_el(dc));
+ return;
+ }
+
if (dc->eci) {
/*
* For M-profile continuable instructions, ECI/ICI handling
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 19/23] target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2021-09-13 16:11 ` [PULL 18/23] target/arm: Take an exception if PSTATE.IL is set Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 20/23] qdev: Support marking individual buses as 'full' Peter Maydell
` (3 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
It is confusing to have different exits from translation
for various conditions in separate functions.
Merge disas_a64_insn into its only caller. Standardize
on the "s" name for the DisasContext, as the code from
disas_a64_insn had more instances.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210821195958.41312-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/translate-a64.c | 224 ++++++++++++++++++-------------------
1 file changed, 109 insertions(+), 115 deletions(-)
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 230cc8d83bf..333bc836b27 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -14649,113 +14649,6 @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype)
return false;
}
-/* C3.1 A64 instruction index by encoding */
-static void disas_a64_insn(CPUARMState *env, DisasContext *s)
-{
- uint32_t insn;
-
- s->pc_curr = s->base.pc_next;
- insn = arm_ldl_code(env, s->base.pc_next, s->sctlr_b);
- s->insn = insn;
- s->base.pc_next += 4;
-
- s->fp_access_checked = false;
- s->sve_access_checked = false;
-
- if (s->pstate_il) {
- /*
- * Illegal execution state. This has priority over BTI
- * exceptions, but comes after instruction abort exceptions.
- */
- gen_exception_insn(s, s->pc_curr, EXCP_UDEF,
- syn_illegalstate(), default_exception_el(s));
- return;
- }
-
- if (dc_isar_feature(aa64_bti, s)) {
- if (s->base.num_insns == 1) {
- /*
- * At the first insn of the TB, compute s->guarded_page.
- * We delayed computing this until successfully reading
- * the first insn of the TB, above. This (mostly) ensures
- * that the softmmu tlb entry has been populated, and the
- * page table GP bit is available.
- *
- * Note that we need to compute this even if btype == 0,
- * because this value is used for BR instructions later
- * where ENV is not available.
- */
- s->guarded_page = is_guarded_page(env, s);
-
- /* First insn can have btype set to non-zero. */
- tcg_debug_assert(s->btype >= 0);
-
- /*
- * Note that the Branch Target Exception has fairly high
- * priority -- below debugging exceptions but above most
- * everything else. This allows us to handle this now
- * instead of waiting until the insn is otherwise decoded.
- */
- if (s->btype != 0
- && s->guarded_page
- && !btype_destination_ok(insn, s->bt, s->btype)) {
- gen_exception_insn(s, s->pc_curr, EXCP_UDEF,
- syn_btitrap(s->btype),
- default_exception_el(s));
- return;
- }
- } else {
- /* Not the first insn: btype must be 0. */
- tcg_debug_assert(s->btype == 0);
- }
- }
-
- switch (extract32(insn, 25, 4)) {
- case 0x0: case 0x1: case 0x3: /* UNALLOCATED */
- unallocated_encoding(s);
- break;
- case 0x2:
- if (!dc_isar_feature(aa64_sve, s) || !disas_sve(s, insn)) {
- unallocated_encoding(s);
- }
- break;
- case 0x8: case 0x9: /* Data processing - immediate */
- disas_data_proc_imm(s, insn);
- break;
- case 0xa: case 0xb: /* Branch, exception generation and system insns */
- disas_b_exc_sys(s, insn);
- break;
- case 0x4:
- case 0x6:
- case 0xc:
- case 0xe: /* Loads and stores */
- disas_ldst(s, insn);
- break;
- case 0x5:
- case 0xd: /* Data processing - register */
- disas_data_proc_reg(s, insn);
- break;
- case 0x7:
- case 0xf: /* Data processing - SIMD and floating point */
- disas_data_proc_simd_fp(s, insn);
- break;
- default:
- assert(FALSE); /* all 15 cases should be handled above */
- break;
- }
-
- /* if we allocated any temporaries, free them here */
- free_tmp_a64(s);
-
- /*
- * After execution of most insns, btype is reset to 0.
- * Note that we set btype == -1 when the insn sets btype.
- */
- if (s->btype > 0 && s->base.is_jmp != DISAS_NORETURN) {
- reset_btype(s);
- }
-}
-
static void aarch64_tr_init_disas_context(DisasContextBase *dcbase,
CPUState *cpu)
{
@@ -14857,10 +14750,11 @@ static void aarch64_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu)
static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
{
- DisasContext *dc = container_of(dcbase, DisasContext, base);
+ DisasContext *s = container_of(dcbase, DisasContext, base);
CPUARMState *env = cpu->env_ptr;
+ uint32_t insn;
- if (dc->ss_active && !dc->pstate_ss) {
+ if (s->ss_active && !s->pstate_ss) {
/* Singlestep state is Active-pending.
* If we're in this state at the start of a TB then either
* a) we just took an exception to an EL which is being debugged
@@ -14871,14 +14765,114 @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
* "did not step an insn" case, and so the syndrome ISV and EX
* bits should be zero.
*/
- assert(dc->base.num_insns == 1);
- gen_swstep_exception(dc, 0, 0);
- dc->base.is_jmp = DISAS_NORETURN;
- } else {
- disas_a64_insn(env, dc);
+ assert(s->base.num_insns == 1);
+ gen_swstep_exception(s, 0, 0);
+ s->base.is_jmp = DISAS_NORETURN;
+ return;
}
- translator_loop_temp_check(&dc->base);
+ s->pc_curr = s->base.pc_next;
+ insn = arm_ldl_code(env, s->base.pc_next, s->sctlr_b);
+ s->insn = insn;
+ s->base.pc_next += 4;
+
+ s->fp_access_checked = false;
+ s->sve_access_checked = false;
+
+ if (s->pstate_il) {
+ /*
+ * Illegal execution state. This has priority over BTI
+ * exceptions, but comes after instruction abort exceptions.
+ */
+ gen_exception_insn(s, s->pc_curr, EXCP_UDEF,
+ syn_illegalstate(), default_exception_el(s));
+ return;
+ }
+
+ if (dc_isar_feature(aa64_bti, s)) {
+ if (s->base.num_insns == 1) {
+ /*
+ * At the first insn of the TB, compute s->guarded_page.
+ * We delayed computing this until successfully reading
+ * the first insn of the TB, above. This (mostly) ensures
+ * that the softmmu tlb entry has been populated, and the
+ * page table GP bit is available.
+ *
+ * Note that we need to compute this even if btype == 0,
+ * because this value is used for BR instructions later
+ * where ENV is not available.
+ */
+ s->guarded_page = is_guarded_page(env, s);
+
+ /* First insn can have btype set to non-zero. */
+ tcg_debug_assert(s->btype >= 0);
+
+ /*
+ * Note that the Branch Target Exception has fairly high
+ * priority -- below debugging exceptions but above most
+ * everything else. This allows us to handle this now
+ * instead of waiting until the insn is otherwise decoded.
+ */
+ if (s->btype != 0
+ && s->guarded_page
+ && !btype_destination_ok(insn, s->bt, s->btype)) {
+ gen_exception_insn(s, s->pc_curr, EXCP_UDEF,
+ syn_btitrap(s->btype),
+ default_exception_el(s));
+ return;
+ }
+ } else {
+ /* Not the first insn: btype must be 0. */
+ tcg_debug_assert(s->btype == 0);
+ }
+ }
+
+ switch (extract32(insn, 25, 4)) {
+ case 0x0: case 0x1: case 0x3: /* UNALLOCATED */
+ unallocated_encoding(s);
+ break;
+ case 0x2:
+ if (!dc_isar_feature(aa64_sve, s) || !disas_sve(s, insn)) {
+ unallocated_encoding(s);
+ }
+ break;
+ case 0x8: case 0x9: /* Data processing - immediate */
+ disas_data_proc_imm(s, insn);
+ break;
+ case 0xa: case 0xb: /* Branch, exception generation and system insns */
+ disas_b_exc_sys(s, insn);
+ break;
+ case 0x4:
+ case 0x6:
+ case 0xc:
+ case 0xe: /* Loads and stores */
+ disas_ldst(s, insn);
+ break;
+ case 0x5:
+ case 0xd: /* Data processing - register */
+ disas_data_proc_reg(s, insn);
+ break;
+ case 0x7:
+ case 0xf: /* Data processing - SIMD and floating point */
+ disas_data_proc_simd_fp(s, insn);
+ break;
+ default:
+ assert(FALSE); /* all 15 cases should be handled above */
+ break;
+ }
+
+ /* if we allocated any temporaries, free them here */
+ free_tmp_a64(s);
+
+ /*
+ * After execution of most insns, btype is reset to 0.
+ * Note that we set btype == -1 when the insn sets btype.
+ */
+ if (s->btype > 0 && s->base.is_jmp != DISAS_NORETURN) {
+ reset_btype(s);
+ }
+
+ translator_loop_temp_check(&s->base);
}
static void aarch64_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu)
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 20/23] qdev: Support marking individual buses as 'full'
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2021-09-13 16:11 ` [PULL 19/23] target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 21/23] hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn Peter Maydell
` (2 subsequent siblings)
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
By default, QEMU will allow devices to be plugged into a bus up to
the bus class's device count limit. If the user creates a device on
the command line or via the monitor and doesn't explicitly specify
the bus to plug it in, QEMU will plug it into the first non-full bus
that it finds.
This is fine in most cases, but some machines have multiple buses of
a given type, some of which are dedicated to on-board devices and
some of which have an externally exposed connector for user-pluggable
devices. One example is I2C buses.
Provide a new function qbus_mark_full() so that a machine model can
mark this kind of "internal only" bus as 'full' after it has created
all the devices that should be plugged into that bus. The "find a
non-full bus" algorithm will then skip the internal-only bus when
looking for a place to plug in user-created devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210903151435.22379-2-peter.maydell@linaro.org
---
include/hw/qdev-core.h | 24 ++++++++++++++++++++++++
softmmu/qdev-monitor.c | 7 ++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index bafc311bfa1..762f9584dde 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -264,6 +264,7 @@ struct BusState {
HotplugHandler *hotplug_handler;
int max_index;
bool realized;
+ bool full;
int num_children;
/*
@@ -798,6 +799,29 @@ static inline bool qbus_is_hotpluggable(BusState *bus)
return bus->hotplug_handler;
}
+/**
+ * qbus_mark_full: Mark this bus as full, so no more devices can be attached
+ * @bus: Bus to mark as full
+ *
+ * By default, QEMU will allow devices to be plugged into a bus up
+ * to the bus class's device count limit. Calling this function
+ * marks a particular bus as full, so that no more devices can be
+ * plugged into it. In particular this means that the bus will not
+ * be considered as a candidate for plugging in devices created by
+ * the user on the commandline or via the monitor.
+ * If a machine has multiple buses of a given type, such as I2C,
+ * where some of those buses in the real hardware are used only for
+ * internal devices and some are exposed via expansion ports, you
+ * can use this function to mark the internal-only buses as full
+ * after you have created all their internal devices. Then user
+ * created devices will appear on the expansion-port bus where
+ * guest software expects them.
+ */
+static inline void qbus_mark_full(BusState *bus)
+{
+ bus->full = true;
+}
+
void device_listener_register(DeviceListener *listener);
void device_listener_unregister(DeviceListener *listener);
diff --git a/softmmu/qdev-monitor.c b/softmmu/qdev-monitor.c
index a304754ab91..0705f008466 100644
--- a/softmmu/qdev-monitor.c
+++ b/softmmu/qdev-monitor.c
@@ -435,7 +435,12 @@ static DeviceState *qbus_find_dev(BusState *bus, char *elem)
static inline bool qbus_is_full(BusState *bus)
{
- BusClass *bus_class = BUS_GET_CLASS(bus);
+ BusClass *bus_class;
+
+ if (bus->full) {
+ return true;
+ }
+ bus_class = BUS_GET_CLASS(bus);
return bus_class->max_dev && bus->num_children >= bus_class->max_dev;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 21/23] hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2021-09-13 16:11 ` [PULL 20/23] qdev: Support marking individual buses as 'full' Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 22/23] hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full' Peter Maydell
2021-09-13 16:11 ` [PULL 23/23] hw/arm/mps2.c: " Peter Maydell
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
The mps2-tz boards use a data-driven structure to create the devices
that sit behind peripheral protection controllers. Currently the
functions which create these devices are passed an 'opaque' pointer
which is always the address within the machine struct of the device
to create, and some "all devices need this" information like irqs and
addresses.
If a specific device needs more information than this, it is
currently not possible to pass that through from the PPCInfo
data structure. Add support for passing an extra data parameter,
so that we can more flexibly handle the needs of specific
device types. To provide some type-safety we make this extra
parameter a pointer to a union (which initially has no members).
In particular, we would like to be able to indicate which of the
i2c controllers are for on-board devices only and which are
connected to the external 'shield' expansion port; a subsequent
patch will use this mechanism for that purpose.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210903151435.22379-3-peter.maydell@linaro.org
---
hw/arm/mps2-tz.c | 35 ++++++++++++++++++++++-------------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index e23830f4b7d..746ba3cc59e 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -373,6 +373,10 @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno)
}
}
+/* Union describing the device-specific extra data we pass to the devfn. */
+typedef union PPCExtraData {
+} PPCExtraData;
+
/* Most of the devices in the AN505 FPGA image sit behind
* Peripheral Protection Controllers. These data structures
* define the layout of which devices sit behind which PPCs.
@@ -382,7 +386,8 @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno)
*/
typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs);
+ const int *irqs,
+ const PPCExtraData *extradata);
typedef struct PPCPortInfo {
const char *name;
@@ -391,6 +396,7 @@ typedef struct PPCPortInfo {
hwaddr addr;
hwaddr size;
int irqs[3]; /* currently no device needs more IRQ lines than this */
+ PPCExtraData extradata; /* to pass device-specific info to the devfn */
} PPCPortInfo;
typedef struct PPCInfo {
@@ -401,7 +407,8 @@ typedef struct PPCInfo {
static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms,
void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs,
+ const PPCExtraData *extradata)
{
/* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE,
* and return a pointer to its MemoryRegion.
@@ -417,7 +424,7 @@ static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms,
static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
/* The irq[] array is tx, rx, combined, in that order */
MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
@@ -441,7 +448,7 @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
MPS2SCC *scc = opaque;
DeviceState *sccdev;
@@ -465,7 +472,7 @@ static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
MPS2FPGAIO *fpgaio = opaque;
MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
@@ -480,7 +487,8 @@ static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs,
+ const PPCExtraData *extradata)
{
SysBusDevice *s;
NICInfo *nd = &nd_table[0];
@@ -500,7 +508,8 @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs,
+ const PPCExtraData *extradata)
{
/*
* The AN524 makes the ethernet and USB share a PPC port.
@@ -543,7 +552,7 @@ static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
TZMPC *mpc = opaque;
int i = mpc - &mms->mpc[0];
@@ -615,7 +624,7 @@ static void remap_irq_fn(void *opaque, int n, int level)
static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
/* The irq[] array is DMACINTR, DMACINTERR, DMACINTTC, in that order */
PL080State *dma = opaque;
@@ -672,7 +681,7 @@ static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
/*
* The AN505 has five PL022 SPI controllers.
@@ -694,7 +703,7 @@ static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
ArmSbconI2CState *i2c = opaque;
SysBusDevice *s;
@@ -707,7 +716,7 @@ static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque,
static MemoryRegion *make_rtc(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size,
- const int *irqs)
+ const int *irqs, const PPCExtraData *extradata)
{
PL031State *pl031 = opaque;
SysBusDevice *s;
@@ -1084,7 +1093,7 @@ static void mps2tz_common_init(MachineState *machine)
}
mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size,
- pinfo->irqs);
+ pinfo->irqs, &pinfo->extradata);
portname = g_strdup_printf("port[%d]", port);
object_property_set_link(OBJECT(ppc), portname, OBJECT(mr),
&error_fatal);
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 22/23] hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full'
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (20 preceding siblings ...)
2021-09-13 16:11 ` [PULL 21/23] hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
2021-09-13 16:11 ` [PULL 23/23] hw/arm/mps2.c: " Peter Maydell
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
The various MPS2 boards have multiple I2C buses: typically a bus
dedicated to the audio configuration, one for the LCD touchscreen
controller, one for a DDR4 EEPROM, and two which are connected to the
external Shield expansion connector. Mark the buses which are used
only for board-internal devices as 'full' so that if the user creates
i2c devices on the commandline without specifying a bus name then
they will be connected to the I2C controller used for the Shield
connector, where guest software will expect them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210903151435.22379-4-peter.maydell@linaro.org
---
hw/arm/mps2-tz.c | 57 ++++++++++++++++++++++++++++++++++++------------
1 file changed, 43 insertions(+), 14 deletions(-)
diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 746ba3cc59e..f40e854dec7 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -375,6 +375,7 @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno)
/* Union describing the device-specific extra data we pass to the devfn. */
typedef union PPCExtraData {
+ bool i2c_internal;
} PPCExtraData;
/* Most of the devices in the AN505 FPGA image sit behind
@@ -711,6 +712,20 @@ static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque,
object_initialize_child(OBJECT(mms), name, i2c, TYPE_ARM_SBCON_I2C);
s = SYS_BUS_DEVICE(i2c);
sysbus_realize(s, &error_fatal);
+
+ /*
+ * If this is an internal-use-only i2c bus, mark it full
+ * so that user-created i2c devices are not plugged into it.
+ * If we implement models of any on-board i2c devices that
+ * plug in to one of the internal-use-only buses, then we will
+ * need to create and plugging those in here before we mark the
+ * bus as full.
+ */
+ if (extradata->i2c_internal) {
+ BusState *qbus = qdev_get_child_bus(DEVICE(i2c), "i2c");
+ qbus_mark_full(qbus);
+ }
+
return sysbus_mmio_get_region(s, 0);
}
@@ -921,10 +936,14 @@ static void mps2tz_common_init(MachineState *machine)
{ "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000, { 36, 37, 44 } },
{ "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000, { 38, 39, 45 } },
{ "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000, { 40, 41, 46 } },
- { "i2c0", make_i2c, &mms->i2c[0], 0x40207000, 0x1000 },
- { "i2c1", make_i2c, &mms->i2c[1], 0x40208000, 0x1000 },
- { "i2c2", make_i2c, &mms->i2c[2], 0x4020c000, 0x1000 },
- { "i2c3", make_i2c, &mms->i2c[3], 0x4020d000, 0x1000 },
+ { "i2c0", make_i2c, &mms->i2c[0], 0x40207000, 0x1000, {},
+ { .i2c_internal = true /* touchscreen */ } },
+ { "i2c1", make_i2c, &mms->i2c[1], 0x40208000, 0x1000, {},
+ { .i2c_internal = true /* audio conf */ } },
+ { "i2c2", make_i2c, &mms->i2c[2], 0x4020c000, 0x1000, {},
+ { .i2c_internal = false /* shield 0 */ } },
+ { "i2c3", make_i2c, &mms->i2c[3], 0x4020d000, 0x1000, {},
+ { .i2c_internal = false /* shield 1 */ } },
},
}, {
.name = "apb_ppcexp2",
@@ -965,15 +984,20 @@ static void mps2tz_common_init(MachineState *machine)
}, {
.name = "apb_ppcexp1",
.ports = {
- { "i2c0", make_i2c, &mms->i2c[0], 0x41200000, 0x1000 },
- { "i2c1", make_i2c, &mms->i2c[1], 0x41201000, 0x1000 },
+ { "i2c0", make_i2c, &mms->i2c[0], 0x41200000, 0x1000, {},
+ { .i2c_internal = true /* touchscreen */ } },
+ { "i2c1", make_i2c, &mms->i2c[1], 0x41201000, 0x1000, {},
+ { .i2c_internal = true /* audio conf */ } },
{ "spi0", make_spi, &mms->spi[0], 0x41202000, 0x1000, { 52 } },
{ "spi1", make_spi, &mms->spi[1], 0x41203000, 0x1000, { 53 } },
{ "spi2", make_spi, &mms->spi[2], 0x41204000, 0x1000, { 54 } },
- { "i2c2", make_i2c, &mms->i2c[2], 0x41205000, 0x1000 },
- { "i2c3", make_i2c, &mms->i2c[3], 0x41206000, 0x1000 },
+ { "i2c2", make_i2c, &mms->i2c[2], 0x41205000, 0x1000, {},
+ { .i2c_internal = false /* shield 0 */ } },
+ { "i2c3", make_i2c, &mms->i2c[3], 0x41206000, 0x1000, {},
+ { .i2c_internal = false /* shield 1 */ } },
{ /* port 7 reserved */ },
- { "i2c4", make_i2c, &mms->i2c[4], 0x41208000, 0x1000 },
+ { "i2c4", make_i2c, &mms->i2c[4], 0x41208000, 0x1000, {},
+ { .i2c_internal = true /* DDR4 EEPROM */ } },
},
}, {
.name = "apb_ppcexp2",
@@ -1015,15 +1039,20 @@ static void mps2tz_common_init(MachineState *machine)
}, {
.name = "apb_ppcexp1",
.ports = {
- { "i2c0", make_i2c, &mms->i2c[0], 0x49200000, 0x1000 },
- { "i2c1", make_i2c, &mms->i2c[1], 0x49201000, 0x1000 },
+ { "i2c0", make_i2c, &mms->i2c[0], 0x49200000, 0x1000, {},
+ { .i2c_internal = true /* touchscreen */ } },
+ { "i2c1", make_i2c, &mms->i2c[1], 0x49201000, 0x1000, {},
+ { .i2c_internal = true /* audio conf */ } },
{ "spi0", make_spi, &mms->spi[0], 0x49202000, 0x1000, { 53 } },
{ "spi1", make_spi, &mms->spi[1], 0x49203000, 0x1000, { 54 } },
{ "spi2", make_spi, &mms->spi[2], 0x49204000, 0x1000, { 55 } },
- { "i2c2", make_i2c, &mms->i2c[2], 0x49205000, 0x1000 },
- { "i2c3", make_i2c, &mms->i2c[3], 0x49206000, 0x1000 },
+ { "i2c2", make_i2c, &mms->i2c[2], 0x49205000, 0x1000, {},
+ { .i2c_internal = false /* shield 0 */ } },
+ { "i2c3", make_i2c, &mms->i2c[3], 0x49206000, 0x1000, {},
+ { .i2c_internal = false /* shield 1 */ } },
{ /* port 7 reserved */ },
- { "i2c4", make_i2c, &mms->i2c[4], 0x49208000, 0x1000 },
+ { "i2c4", make_i2c, &mms->i2c[4], 0x49208000, 0x1000, {},
+ { .i2c_internal = true /* DDR4 EEPROM */ } },
},
}, {
.name = "apb_ppcexp2",
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 23/23] hw/arm/mps2.c: Mark internal-only I2C buses as 'full'
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
` (21 preceding siblings ...)
2021-09-13 16:11 ` [PULL 22/23] hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full' Peter Maydell
@ 2021-09-13 16:11 ` Peter Maydell
22 siblings, 0 replies; 24+ messages in thread
From: Peter Maydell @ 2021-09-13 16:11 UTC (permalink / raw)
To: qemu-devel
The various MPS2 boards implemented in mps2.c have multiple I2C
buses: a bus dedicated to the audio configuration, one for the LCD
touchscreen controller, and two which are connected to the external
Shield expansion connector. Mark the buses which are used only for
board-internal devices as 'full' so that if the user creates i2c
devices on the commandline without specifying a bus name then they
will be connected to the I2C controller used for the Shield
connector, where guest software will expect them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210903151435.22379-5-peter.maydell@linaro.org
---
hw/arm/mps2.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index 4634aa1a1ca..bb76fa68890 100644
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -428,7 +428,17 @@ static void mps2_common_init(MachineState *machine)
0x40023000, /* Audio */
0x40029000, /* Shield0 */
0x4002a000}; /* Shield1 */
- sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL);
+ DeviceState *dev;
+
+ dev = sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL);
+ if (i < 2) {
+ /*
+ * internal-only bus: mark it full to avoid user-created
+ * i2c devices being plugged into it.
+ */
+ BusState *qbus = qdev_get_child_bus(dev, "i2c");
+ qbus_mark_full(qbus);
+ }
}
create_unimplemented_device("i2s", 0x40024000, 0x400);
--
2.20.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
end of thread, other threads:[~2021-09-13 16:48 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-13 16:11 [PULL 00/23] target-arm queue Peter Maydell
2021-09-13 16:11 ` [PULL 01/23] hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase Peter Maydell
2021-09-13 16:11 ` [PULL 02/23] hw/char: cadence_uart: Disable transmit when input clock is disabled Peter Maydell
2021-09-13 16:11 ` [PULL 03/23] hw/char: cadence_uart: Move clock/reset check to uart_can_receive() Peter Maydell
2021-09-13 16:11 ` [PULL 04/23] hw/char: cadence_uart: Convert to memop_with_attrs() ops Peter Maydell
2021-09-13 16:11 ` [PULL 05/23] hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}() Peter Maydell
2021-09-13 16:11 ` [PULL 06/23] hw/char: cadence_uart: Log a guest error when device is unclocked or in reset Peter Maydell
2021-09-13 16:11 ` [PULL 07/23] hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM Peter Maydell
2021-09-13 16:11 ` [PULL 08/23] hw/arm: Add support for kudo-bmc board Peter Maydell
2021-09-13 16:11 ` [PULL 09/23] hw/intc: GICv3 ITS initial framework Peter Maydell
2021-09-13 16:11 ` [PULL 10/23] hw/intc: GICv3 ITS register definitions added Peter Maydell
2021-09-13 16:11 ` [PULL 11/23] hw/intc: GICv3 ITS command queue framework Peter Maydell
2021-09-13 16:11 ` [PULL 12/23] hw/intc: GICv3 ITS Command processing Peter Maydell
2021-09-13 16:11 ` [PULL 13/23] hw/intc: GICv3 ITS Feature enablement Peter Maydell
2021-09-13 16:11 ` [PULL 14/23] hw/intc: GICv3 redistributor ITS processing Peter Maydell
2021-09-13 16:11 ` [PULL 15/23] tests/data/acpi/virt: Add IORT files for ITS Peter Maydell
2021-09-13 16:11 ` [PULL 16/23] hw/arm/virt: add ITS support in virt GIC Peter Maydell
2021-09-13 16:11 ` [PULL 17/23] tests/data/acpi/virt: Update IORT files for ITS Peter Maydell
2021-09-13 16:11 ` [PULL 18/23] target/arm: Take an exception if PSTATE.IL is set Peter Maydell
2021-09-13 16:11 ` [PULL 19/23] target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn Peter Maydell
2021-09-13 16:11 ` [PULL 20/23] qdev: Support marking individual buses as 'full' Peter Maydell
2021-09-13 16:11 ` [PULL 21/23] hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn Peter Maydell
2021-09-13 16:11 ` [PULL 22/23] hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full' Peter Maydell
2021-09-13 16:11 ` [PULL 23/23] hw/arm/mps2.c: " Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.