From: Aleksander Jan Bajkowski <olek2@wp.pl>
To: john@phrozen.org, tsbogend@alpha.franken.de, olek2@wp.pl,
maz@kernel.org, ralf@linux-mips.org, ralph.hempel@lantiq.com,
davem@davemloft.net, kuba@kernel.org, robh+dt@kernel.org,
hauke@hauke-m.de, dev@kresin.me, arnd@arndb.de, jgg@ziepe.ca,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next 6/8] dt-bindings: net: lantiq-xrx200-net: convert to the json-schema
Date: Tue, 14 Sep 2021 23:21:03 +0200 [thread overview]
Message-ID: <20210914212105.76186-6-olek2@wp.pl> (raw)
In-Reply-To: <20210914212105.76186-1-olek2@wp.pl>
Convert the Lantiq PMAC Device Tree binding documentation to json-schema.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
.../bindings/net/lantiq,xrx200-net.txt | 21 -------
.../bindings/net/lantiq,xrx200-net.yaml | 59 +++++++++++++++++++
2 files changed, 59 insertions(+), 21 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
create mode 100644 Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
deleted file mode 100644
index 5ff5e68bbbb6..000000000000
--- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Lantiq xRX200 GSWIP PMAC Ethernet driver
-==================================
-
-Required properties:
-
-- compatible : "lantiq,xrx200-net" for the PMAC of the embedded
- : GSWIP in the xXR200
-- reg : memory range of the PMAC core inside of the GSWIP core
-- interrupts : TX and RX DMA interrupts. Use interrupt-names "tx" for
- : the TX interrupt and "rx" for the RX interrupt.
-
-Example:
-
-ethernet@e10b308 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-net";
- reg = <0xe10b308 0xcf8>;
- interrupts = <73>, <72>;
- interrupt-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
new file mode 100644
index 000000000000..7bc074a42369
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,xrx200-net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq xRX200 GSWIP PMAC Ethernet driver
+
+maintainers:
+ - Hauke Mehrtens <hauke@hauke-m.de>
+
+properties:
+ $nodename:
+ pattern: "^ethernet@[0-9a-f]+$"
+
+ compatible:
+ const: lantiq,xrx200-net
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: TX interrupt
+ - description: RX interrupt
+
+ interrupt-names:
+ items:
+ - const: tx
+ - const: rx
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupt-parent
+ - interrupts
+ - interrupt-names
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ ethernet@e10b308 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-net";
+ reg = <0xe10b308 0xcf8>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73>, <72>;
+ interrupt-names = "tx", "rx";
+ };
--
2.30.2
next prev parent reply other threads:[~2021-09-14 21:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-14 21:20 [PATCH net-next 1/8] MIPS: lantiq: dma: add small delay after reset Aleksander Jan Bajkowski
2021-09-14 21:20 ` [PATCH net-next 2/8] MIPS: lantiq: dma: reset correct number of channel Aleksander Jan Bajkowski
2021-09-14 21:21 ` [PATCH net-next 3/8] MIPS: lantiq: dma: fix burst length for DEU Aleksander Jan Bajkowski
2021-09-14 21:21 ` [PATCH net-next 4/8] MIPS: lantiq: dma: make the burst length configurable by the drivers Aleksander Jan Bajkowski
2021-09-14 22:40 ` Hauke Mehrtens
2021-09-14 21:21 ` [PATCH net-next 5/8] net: lantiq: configure the burst length in ethernet drivers Aleksander Jan Bajkowski
2021-09-14 22:36 ` Hauke Mehrtens
2021-09-19 18:16 ` Aleksander Bajkowski
2021-09-14 21:21 ` Aleksander Jan Bajkowski [this message]
2021-09-14 21:21 ` [PATCH net-next 7/8] dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings Aleksander Jan Bajkowski
2021-09-14 21:21 ` [PATCH net-next 8/8] dt-bindings: net: lantiq: Add the burst length properties Aleksander Jan Bajkowski
2021-09-15 10:30 ` [PATCH net-next 1/8] MIPS: lantiq: dma: add small delay after reset patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210914212105.76186-6-olek2@wp.pl \
--to=olek2@wp.pl \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=dev@kresin.me \
--cc=devicetree@vger.kernel.org \
--cc=hauke@hauke-m.de \
--cc=jgg@ziepe.ca \
--cc=john@phrozen.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=maz@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=ralf@linux-mips.org \
--cc=ralph.hempel@lantiq.com \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.