All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Rob Herring <robh+dt@kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Lee Jones <lee.jones@linaro.org>,
	bcousson@baylibre.com, Tony Lindgren <tony@atomide.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-omap@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	Ryan Barnett <ryan.barnett@collins.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Jason Reeder <jreeder@ti.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v3 39/47] iio: adc: ti_am335x_adc: Fix style
Date: Wed, 15 Sep 2021 17:59:00 +0200	[thread overview]
Message-ID: <20210915155908.476767-40-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20210915155908.476767-1-miquel.raynal@bootlin.com>

These warnings are reported by checkpatch.pl essentially.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 104 ++++++++++++++++----------------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 11109c84f971..496603ab7841 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -58,7 +58,7 @@ static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
 }
 
 static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
-					unsigned int val)
+			 unsigned int val)
 {
 	writel(val, adc->mfd_tscadc->tscadc_base + reg);
 }
@@ -73,7 +73,7 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
 }
 
 static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
-		struct iio_chan_spec const *chan)
+				  struct iio_chan_spec const *chan)
 {
 	int i;
 
@@ -120,8 +120,6 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 	 * Channel would represent which analog input
 	 * needs to be given to ADC to digitalize data.
 	 */
-
-
 	for (i = 0; i < adc_dev->channels; i++) {
 		int chan;
 
@@ -134,9 +132,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		}
 
 		if (adc_dev->step_avg[i])
-			stepconfig =
-			STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
-			STEPCONFIG_FIFO1;
+			stepconfig = STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
+				     STEPCONFIG_FIFO1;
 		else
 			stepconfig = STEPCONFIG_FIFO1;
 
@@ -144,10 +141,9 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 			stepconfig |= STEPCONFIG_MODE_SWCNT;
 
 		tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
-				stepconfig | STEPCONFIG_INP(chan) |
-				STEPCONFIG_INM_ADCREFM |
-				STEPCONFIG_RFP_VREFP |
-				STEPCONFIG_RFM_VREFN);
+			     stepconfig | STEPCONFIG_INP(chan) |
+			     STEPCONFIG_INM_ADCREFM | STEPCONFIG_RFP_VREFP |
+			     STEPCONFIG_RFM_VREFN);
 
 		if (adc_dev->open_delay[i] > STEPCONFIG_MAX_OPENDLY) {
 			dev_warn(dev, "chan %d: wrong open delay, truncated to 0x%lX\n",
@@ -162,8 +158,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		}
 
 		tiadc_writel(adc_dev, REG_STEPDELAY(steps),
-				STEPDELAY_OPEN(adc_dev->open_delay[i]) |
-				STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
+			     STEPDELAY_OPEN(adc_dev->open_delay[i]) |
+			     STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
 
 		adc_dev->channel_step[i] = steps;
 		steps++;
@@ -188,10 +184,12 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
 		config = tiadc_readl(adc_dev, REG_CTRL);
 		config &= ~(CNTRLREG_SSENB);
 		tiadc_writel(adc_dev, REG_CTRL, config);
-		tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
-				| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+		tiadc_writel(adc_dev, REG_IRQSTATUS,
+			     IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW |
+			     IRQENB_FIFO1THRES);
 
-		/* wait for idle state.
+		/*
+		 * Wait for the idle state.
 		 * ADC needs to finish the current conversion
 		 * before disabling the module
 		 */
@@ -219,11 +217,11 @@ static irqreturn_t tiadc_worker_h(int irq, void *private)
 
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (k = 0; k < fifo1count; k = k + i) {
-		for (i = 0; i < (indio_dev->scan_bytes)/2; i++) {
+		for (i = 0; i < indio_dev->scan_bytes / 2; i++) {
 			read = tiadc_readl(adc_dev, REG_FIFO1);
 			data[i] = read & FIFOREAD_DATA_MASK;
 		}
-		iio_push_to_buffers(indio_dev, (u8 *) data);
+		iio_push_to_buffers(indio_dev, (u8 *)data);
 	}
 
 	tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
@@ -256,6 +254,7 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
 	struct dma_async_tx_descriptor *desc;
 
 	dma->current_period = 0; /* We start to fill period 0 */
+
 	/*
 	 * Make the fifo thresh as the multiple of total number of
 	 * channels enabled, so make sure that cyclic DMA period
@@ -265,9 +264,10 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
 	 */
 	dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
 				     adc_dev->total_ch_enabled) - 1;
+
 	/* Make sure that period length is multiple of fifo thresh level */
 	dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
-				    (dma->fifo_thresh + 1) * sizeof(u16));
+				     (dma->fifo_thresh + 1) * sizeof(u16));
 
 	dma->conf.src_maxburst = dma->fifo_thresh + 1;
 	dmaengine_slave_config(dma->chan, &dma->conf);
@@ -303,9 +303,9 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
-				IRQENB_FIFO1OVRRUN |
-				IRQENB_FIFO1UNDRFLW));
+	tiadc_writel(adc_dev, REG_IRQCLR,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 
 	/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
@@ -335,8 +335,9 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 
 	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
 
-	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
-				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
+	tiadc_writel(adc_dev, REG_IRQSTATUS,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 
 	irq_enable = IRQENB_FIFO1OVRRUN;
 	if (!dma->chan)
@@ -352,8 +353,9 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 	struct tiadc_dma *dma = &adc_dev->dma;
 	int fifo1count, i;
 
-	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
-				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+	tiadc_writel(adc_dev, REG_IRQCLR,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
 	adc_dev->buffer_en_ch_steps = 0;
 	adc_dev->total_ch_enabled = 0;
@@ -385,12 +387,11 @@ static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
 };
 
 static int tiadc_iio_buffered_hardware_setup(struct device *dev,
-	struct iio_dev *indio_dev,
-	irqreturn_t (*pollfunc_bh)(int irq, void *p),
-	irqreturn_t (*pollfunc_th)(int irq, void *p),
-	int irq,
-	unsigned long flags,
-	const struct iio_buffer_setup_ops *setup_ops)
+					     struct iio_dev *indio_dev,
+					     irqreturn_t (*pollfunc_bh)(int irq, void *p),
+					     irqreturn_t (*pollfunc_th)(int irq, void *p),
+					     int irq, unsigned long flags,
+					     const struct iio_buffer_setup_ops *setup_ops)
 {
 	int ret;
 
@@ -401,7 +402,7 @@ static int tiadc_iio_buffered_hardware_setup(struct device *dev,
 		return ret;
 
 	return devm_request_threaded_irq(dev, irq, pollfunc_th, pollfunc_bh,
-				flags, indio_dev->name, indio_dev);
+					 flags, indio_dev->name, indio_dev);
 }
 
 static const char * const chan_name_ain[] = {
@@ -426,12 +427,11 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
 	indio_dev->num_channels = channels;
 	chan_array = devm_kcalloc(dev, channels, sizeof(*chan_array),
 				  GFP_KERNEL);
-	if (chan_array == NULL)
+	if (!chan_array)
 		return -ENOMEM;
 
 	chan = chan_array;
 	for (i = 0; i < channels; i++, chan++) {
-
 		chan->type = IIO_VOLTAGE;
 		chan->indexed = 1;
 		chan->channel = adc_dev->channel_line[i];
@@ -449,8 +449,8 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
 }
 
 static int tiadc_read_raw(struct iio_dev *indio_dev,
-		struct iio_chan_spec const *chan,
-		int *val, int *val2, long mask)
+			  struct iio_chan_spec const *chan, int *val, int *val2,
+			  long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	int i, map_val;
@@ -479,9 +479,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	timeout = jiffies + msecs_to_jiffies
-				(IDLE_TIMEOUT * adc_dev->channels);
 	/* Wait for Fifo threshold interrupt */
+	timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT * adc_dev->channels);
 	while (1) {
 		fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 		if (fifo1count)
@@ -493,6 +492,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 			goto err_unlock;
 		}
 	}
+
 	map_val = adc_dev->channel_step[chan->scan_index];
 
 	/*
@@ -510,13 +510,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		if (stepid == map_val) {
 			read = read & FIFOREAD_DATA_MASK;
 			found = true;
-			*val = (u16) read;
+			*val = (u16)read;
 		}
 	}
+
 	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (!found)
-		ret =  -EBUSY;
+		ret = -EBUSY;
 
 err_unlock:
 	mutex_unlock(&adc_dev->fifo1_lock);
@@ -557,6 +558,7 @@ static int tiadc_request_dma(struct platform_device *pdev,
 		goto err;
 
 	return 0;
+
 err:
 	dma_release_channel(dma->chan);
 	return -ENOMEM;
@@ -606,7 +608,7 @@ static int tiadc_probe(struct platform_device *pdev)
 	}
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
-	if (indio_dev == NULL) {
+	if (!indio_dev) {
 		dev_err(&pdev->dev, "failed to allocate iio device\n");
 		return -ENOMEM;
 	}
@@ -628,12 +630,11 @@ static int tiadc_probe(struct platform_device *pdev)
 		return err;
 
 	err = tiadc_iio_buffered_hardware_setup(&pdev->dev, indio_dev,
-		&tiadc_worker_h,
-		&tiadc_irq_h,
-		adc_dev->mfd_tscadc->irq,
-		IRQF_SHARED,
-		&tiadc_buffer_setup_ops);
-
+						&tiadc_worker_h,
+						&tiadc_irq_h,
+						adc_dev->mfd_tscadc->irq,
+						IRQF_SHARED,
+						&tiadc_buffer_setup_ops);
 	if (err)
 		goto err_free_channels;
 
@@ -684,8 +685,7 @@ static int __maybe_unused tiadc_suspend(struct device *dev)
 
 	idle = tiadc_readl(adc_dev, REG_CTRL);
 	idle &= ~(CNTRLREG_SSENB);
-	tiadc_writel(adc_dev, REG_CTRL, (idle |
-			CNTRLREG_POWERDOWN));
+	tiadc_writel(adc_dev, REG_CTRL, idle | CNTRLREG_POWERDOWN);
 
 	return 0;
 }
@@ -698,12 +698,12 @@ static int __maybe_unused tiadc_resume(struct device *dev)
 
 	/* Make sure ADC is powered up */
 	restore = tiadc_readl(adc_dev, REG_CTRL);
-	restore &= ~(CNTRLREG_POWERDOWN);
+	restore &= ~CNTRLREG_POWERDOWN;
 	tiadc_writel(adc_dev, REG_CTRL, restore);
 
 	tiadc_step_config(indio_dev);
 	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
-			adc_dev->buffer_en_ch_steps);
+				adc_dev->buffer_en_ch_steps);
 	return 0;
 }
 
-- 
2.27.0


  parent reply	other threads:[~2021-09-15 16:00 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-15 15:58 [PATCH v3 00/47] TI AM437X ADC1 Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 01/47] clk: ti: am43xx: Add clkctrl data for am43xx ADC1 Miquel Raynal
2021-09-21  7:49   ` Tony Lindgren
2021-09-15 15:58 ` [PATCH v3 02/47] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 03/47] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description Miquel Raynal
2021-09-21  3:55   ` Dmitry Torokhov
2021-09-15 15:58 ` [PATCH v3 04/47] dt-bindings: iio: adc: ti,am3359-adc: " Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 05/47] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file Miquel Raynal
2021-09-21  3:56   ` Dmitry Torokhov
2021-09-15 15:58 ` [PATCH v3 06/47] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 07/47] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 08/47] mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 09/47] mfd: ti_am335x_tscadc: Replace license text with SPDX tag Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 10/47] mfd: ti_am335x_tscadc: Fix style Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 11/47] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 12/47] mfd: ti_am335x_tscadc: Get rid of useless gotos Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 13/47] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 14/47] mfd: ti_am335x_tscadc: Don't search the tree for our clock Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 15/47] mfd: ti_am335x_tscadc: Simplify divisor calculation Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 16/47] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 17/47] mfd: ti_am335x_tscadc: Use driver data Miquel Raynal
2021-09-22 15:01   ` Lee Jones
2021-09-22 15:42     ` Miquel Raynal
2021-09-22 15:54       ` Lee Jones
2021-09-15 15:58 ` [PATCH v3 18/47] mfd: ti_am335x_tscadc: Mimic the probe from resume() Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 19/47] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 20/47] mfd: ti_am335x_tscadc: Always provide an idle configuration Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 21/47] mfd: ti_am335x_tscadc: Reorder the initialization steps Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 22/47] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 23/47] mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 24/47] mfd: ti_am335x_tscadc: Fix header spacing Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 25/47] mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro Miquel Raynal
2021-09-18 16:02   ` Jonathan Cameron
2021-09-15 15:58 ` [PATCH v3 26/47] mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when relevant Miquel Raynal
2021-09-18 16:15   ` Jonathan Cameron
2021-09-15 15:58 ` [PATCH v3 27/47] mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries Miquel Raynal
2021-09-18 16:22   ` Jonathan Cameron
2021-09-15 15:58 ` [PATCH v3 28/47] mfd: ti_am335x_tscadc: Drop useless definitions from the header Miquel Raynal
2021-09-18 16:31   ` Jonathan Cameron
2021-09-20 15:21     ` Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 29/47] mfd: ti_am335x_tscadc: Rename the subsystem enable macro Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 30/47] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 31/47] mfd: ti_am335x_tscadc: Rename a variable Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 32/47] mfd: ti_am335x_tscadc: Fix an error message Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 33/47] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 34/47] mfd: ti_am335x_tscadc: Introduce has_tsc Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 35/47] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support Miquel Raynal
2021-09-22 16:00   ` Lee Jones
2021-09-23  8:33     ` Miquel Raynal
2021-09-28 10:34     ` Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 36/47] mfd: ti_am335x_tscadc: Support the correctly spelled DT property Miquel Raynal
2021-09-22 15:57   ` Lee Jones
2021-09-23  8:19     ` Miquel Raynal
2021-09-23  9:11       ` Lee Jones
2021-09-23  9:33         ` Miquel Raynal
2021-09-27  8:09           ` Lee Jones
2021-09-27  8:18             ` Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 37/47] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls Miquel Raynal
2021-09-15 15:58 ` [PATCH v3 38/47] iio: adc: ti_am335x_adc: Replace license text with SPDX tag Miquel Raynal
2021-09-15 15:59 ` Miquel Raynal [this message]
2021-09-15 15:59 ` [PATCH v3 40/47] iio: adc: ti_am335x_adc: Get rid of useless gotos Miquel Raynal
2021-09-15 15:59 ` [PATCH v3 41/47] iio: adc: ti_am335x_adc: Gather the checks on the delays Miquel Raynal
2021-09-15 15:59 ` [PATCH v3 42/47] iio: adc: ti_am335x_adc: Add a unit to the timeout delay Miquel Raynal
2021-09-15 15:59 ` [PATCH v3 43/47] iio: adc: ti_am335x_adc: Add the scale information Miquel Raynal
2021-09-15 15:59 ` [PATCH v3 44/47] iio: adc: ti_am335x_adc: Add the am437x compatible Miquel Raynal
2021-09-15 15:59 ` [PATCH v3 45/47] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property Miquel Raynal
2021-09-21  7:51   ` Tony Lindgren
2021-09-15 15:59 ` [PATCH v3 46/47] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module Miquel Raynal
2021-09-21  7:51   ` Tony Lindgren
2021-09-15 15:59 ` [PATCH v3 47/47] ARM: dts: am437x-gp-evm: enable ADC1 Miquel Raynal
2021-09-20 15:30 ` [PATCH v3 00/47] TI AM437X ADC1 Miquel Raynal
2021-09-22 16:02 ` Lee Jones
2021-09-23  8:35   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210915155908.476767-40-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=jic23@kernel.org \
    --cc=jreeder@ti.com \
    --cc=kristo@kernel.org \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=ryan.barnett@collins.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.