From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 700C0C433EF for ; Thu, 16 Sep 2021 13:07:12 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 44C3760FBF for ; Thu, 16 Sep 2021 13:07:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239858AbhIPNIb (ORCPT ); Thu, 16 Sep 2021 09:08:31 -0400 Received: from relay5-d.mail.gandi.net ([217.70.183.197]:55799 "EHLO relay5-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239495AbhIPNIb (ORCPT ); Thu, 16 Sep 2021 09:08:31 -0400 Received: (Authenticated sender: jacopo@jmondi.org) by relay5-d.mail.gandi.net (Postfix) with ESMTPSA id 05D8E1C000D; Thu, 16 Sep 2021 13:07:06 +0000 (UTC) Date: Thu, 16 Sep 2021 15:07:52 +0200 From: Jacopo Mondi To: Tomi Valkeinen Cc: linux-media@vger.kernel.org, sakari.ailus@linux.intel.com, Jacopo Mondi , Laurent Pinchart , niklas.soderlund+renesas@ragnatech.se, Mauro Carvalho Chehab , Hans Verkuil , Pratyush Yadav , Lokesh Vutla Subject: Re: [PATCH v8 03/36] media: subdev: add 'which' to subdev state Message-ID: <20210916130752.bsdhq3xpsatdfl4a@uno.localdomain> References: <20210830110116.488338-1-tomi.valkeinen@ideasonboard.com> <20210830110116.488338-4-tomi.valkeinen@ideasonboard.com> <20210913114154.ovffxjoghgdud4js@uno.localdomain> <0733ae28-bcd9-6dc8-fb6a-0fa43beb1191@ideasonboard.com> <20210913133841.nck65h2ft4hfnbg5@uno.localdomain> <656577a3-b783-0272-4809-20169b84e891@ideasonboard.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <656577a3-b783-0272-4809-20169b84e891@ideasonboard.com> Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Tomi, On Mon, Sep 13, 2021 at 05:26:45PM +0300, Tomi Valkeinen wrote: > On 13/09/2021 16:38, Jacopo Mondi wrote: > > Hi Tomi, > > > > On Mon, Sep 13, 2021 at 03:17:01PM +0300, Tomi Valkeinen wrote: > > > On 13/09/2021 14:41, Jacopo Mondi wrote: > > > > Hi Tomi, > > > > > > > > On Mon, Aug 30, 2021 at 02:00:43PM +0300, Tomi Valkeinen wrote: > > > > > The subdev state is passed to functions in the media drivers, and > > > > > usually either V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY is > > > > > also given to the function in one way or another. > > > > > > > > > > One op where this is not the case is v4l2_subdev_pad_ops.init_cfg. One > > > > > could argue that the initialization of the state should be the same for > > > > > both ACTIVE and TRY cases, but unfortunately that is not the case: > > > > > > > > > > - Some drivers do also other things than just touch the state when > > > > > dealing with ACTIVE, e.g. if there is extra state outside the standard > > > > > subdev state. > > > > > - Some drivers might need to create, say, struct v4l2_subdev_format > > > > > which has 'which' field, and that needs to be filled with either ACTIVE > > > > > or TRY. > > > > > > > > > > Currently init_cfg is only called for TRY case from the v4l2 framework, > > > > > passing the TRY state. Some drivers call their own init_cfg, passing > > > > > NULL as the state, which is used to indicate ACTIVE case. > > > > > > > > > > In the future we want to pass subdev's active state from the v4l2 > > > > > framework side, so we need a solution to this. > > > > > > > > > > We could change the init_cfg() to include the TRY/ACTIVE value, which > > > > > would require changing more or less all the drivers. Instead, I have > > > > > added 'which' field to the subdev state itself, filled at state > > > > > allocation time, which only requires changes to the drivers that > > > > > allocate a state themselves. > > > > > > > > > > Signed-off-by: Tomi Valkeinen > > > > > --- > > > > > drivers/media/platform/rcar-vin/rcar-v4l2.c | 2 +- > > > > > drivers/media/platform/vsp1/vsp1_entity.c | 2 +- > > > > > drivers/media/v4l2-core/v4l2-subdev.c | 10 +++++++--- > > > > > drivers/staging/media/tegra-video/vi.c | 2 +- > > > > > include/media/v4l2-subdev.h | 7 ++++++- > > > > > 5 files changed, 16 insertions(+), 7 deletions(-) > > > > > > > > > > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c > > > > > index 5f4fa8c48f68..1de30d5b437f 100644 > > > > > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c > > > > > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c > > > > > @@ -252,7 +252,7 @@ static int rvin_try_format(struct rvin_dev *vin, u32 which, > > > > > u32 width, height; > > > > > int ret; > > > > > > > > > > - sd_state = v4l2_alloc_subdev_state(sd); > > > > > + sd_state = v4l2_alloc_subdev_state(sd, V4L2_SUBDEV_FORMAT_ACTIVE); > > > > > > > > Shouldn't the 'which' parameters be used to decide if either ACTIVE or > > > > TRY have to be used ? this function is also used to set TRY formats, > > > > in example... > > > > > > > > Oh, maybe I got how it works, the state's which is not > > > > relevant but the v4l2_subdev_format's which is, as it will be used in > > > > the next patch to decide if the subdev's state of the file-handle's > > > > state should be passed to the ioctl. > > > > > > Yes. It's messy, but it's how it worked before also. > > > > > > The drivers can't really allocate TRY state as it must come from the core, > > > based on the filehandle. Now as I say that, makes me wonder why even expose > > > the option to drivers. Maybe v4l2_alloc_subdev_state() should take just the > > > sd parameter, and always allocate ACTIVE state, and the v4l2 core can use > > > another way to create the TRY state. > > > > > > > init_cfg() as well as other operations used to received an > > array of per fh's pad_configs, and the sd pointer itself. The fh's pad > > configs were allocated by the core, as well as the core now allocates > > the per-fh's state. > > > > Before the introduction of 'state', if the 'which' flags was set to > > TRY then information were stored/retrieved/initialized in the per-fh > > pad_config, otherwise the active configuration (usually stored in the > > driver main structure) was used. > > > > So we had a clear separation of per-fh information and the active > > state. The core didn't care afaict, and passed in both, then driver had > > to deal with them doing the right thing by inspecting the 'which' flag. > > > > The typical pattern was: > > > > static int subdev_ops(sd, pad_cfg, which) > > { > > if (which == TRY) > > /* Operate on config stored in pad_cfg */ > > > > else > > /* > > * Operate on config stored in subdev (and > > * applied to HW) > > */ > > } > > > > Or am I overlooking some cases or do you agree with my understanding > > so far ? > > More or less, yes. I think there are (used to be) three kinds of ops: > > - Ops that get pad_cfg and 'which' in an op specific struct. E.g. set_fmt. > The pad_cfg is TRY pad_config, even if 'which' == ACTIVE. > > - Ops that don't get pad_cfg, like s_stream. 'which' is implicitly ACTIVE. Also note that operations like s_stream do not take a state as parameter. The driver has to fetch it from the subdev anyway (this in reply to the idea of having the active state as parameter vs retrieving it from the subdev if ACTIVE) While porting the R-Car drivers on top of this series I found myself in the need to (in the s_stream call chain) static int rcsi2_start_receiver(struct rcar_csi2 *priv) { const struct v4l2_subdev_state *state = priv->subdev.state; const struct v4l2_subdev_stream_configs *configs = &state->stream_configs; ... /* * Configure field handling inspecting the formats of the * single sink pad streams. */ for (i = 0; i < configs->num_configs; ++i) { const struct v4l2_subdev_stream_config *config = configs->configs; if (config->pad != RCAR_CSI2_SINK) continue; if (config->fmt.field != V4L2_FIELD_ALTERNATE) continue; fld |= FLD_DET_SEL(1); fld |= FLD_FLD_EN(config->stream); /* PAL vs NTSC. */ if (config->fmt.height == 240) fld |= FLD_FLD_NUM(0); else fld |= FLD_FLD_NUM(1); } ... } Am I doing it wrong, or is this a case for the subdev to have to directly access sd->state ? > > - init_cfg which gets pad_cfg, but no which (as 'which' is always implicitly > TRY) > > So pad_cfg was TRY state. Drivers could use pad_configs internally to track > ACTIVE state, but the core had no knowledge about this. > > > Now we have a 'state' that holds the array of pad_configs and along > > the continuation of the series will end up holding per-pad > > configurations. > > > > We now also have one 'state' per file-handle, and one > > per-subdev. As I see this, it would be natual for drivers to receive > > one state without knowing where it comes from. In the next patch you > > Note that only subdev's that explicitly support the new state code, and > allocate the state, have the subdev active state. Which means only the > drivers in my work branch. > > The "old" drivers work like they used to: they get the state (essentially > repackaged pad_cfg) for TRY cases, NULL otherwise. > > And yes, it would be natural to just get a state, but the subdev drivers > need to know if the context is TRY/ACTIVE. As you can see from the bullet > list above, the driver knows this in all the other places except init_cfg. > > > instrument the core to do exactly this: inspect the which flag and > > pass in the 'right' state. Ofc drivers need to have access to 'which' > > to know if they have to apply settings to the HW or not. > > > > Looking ahead in your series I see these structures: > > > > struct v4l2_subdev_pad_config { > > struct v4l2_mbus_framefmt try_fmt; > > struct v4l2_rect try_crop; > > struct v4l2_rect try_compose; > > }; > > > > struct v4l2_subdev_stream_config { > > u32 pad; > > u32 stream; > > > > struct v4l2_mbus_framefmt fmt; > > struct v4l2_rect crop; > > struct v4l2_rect compose; > > }; > > > > struct v4l2_subdev_stream_configs { > > u32 num_configs; > > struct v4l2_subdev_stream_config *configs; > > }; > > > > All of them part of state: > > > > struct v4l2_subdev_state { > > struct mutex lock; > > u32 which; > > struct v4l2_subdev_pad_config *pads; > > struct v4l2_subdev_krouting routing; > > struct v4l2_subdev_stream_configs stream_configs; > > }; > > > > So 'state' will hold 'TRY' information (only used for 'state' > > instances allocated in the fh) and 'ACTIVE' ones (used for states > > allocated in the sd). > > Right. > > > Looking at 'v4l2_subdev_pad_config' and 'v4l2_subdev_stream_config' they > > seem to describe more or less the same things: fmt, crop and compose > > (per pad-stream in case of stream_config). I wonder if those shouldn't > > be unified so that: > > > > 1) Drivers receive one state: the core passes in the 'correct' one > > (per-fh or per-sd) as you do in next patch > > Yes. But note that "old" drivers don't have active state. > > > 2) The 'which' information is not stored in the state but it's only > > 'contextual' (as in a parameter to the subdev operation) so that > > drivers inspect it to know if they have to apply settings to hw or not > > Yes, except we have init_cfg... > > > 3) v4l2_subdev_pad_config can be re-used and expanded, to maintain per-pad > > configurations regardless if they're ACTIVE or TRY, as this only depends > > on where the state is stored. > > pad_config is a static array of per-pad configs. stream_configs is a dynamic > per-stream config. stream_configs is a super-set of pad-configs, so we could > drop pad_configs, but it would require changing all the drivers in > non-trivial ways. > > v4l2_subdev_pad_config is not used or even allocated by the "new" drivers. > And routing & stream_configs are not used by the "old" drivers. > > > As I immagine it a subdev pad operation could look like: > > > > static int subdev_op(sd, pad, state, which, ...) > > { > > /* Doesn't matter if state is per-fh or the sd one. */ > > state->pads[pad].fmt = ....; > > > > if (which == TRY) > > return; > > > > /* Apply to the HW. */ > > } > > > > Does it make any sense to you ? I might have missed some reason why > > this is not possible. > > It makes sense, but there are the buts =). I've tried to explain these in > the commit messages, but it's kind of confusing. > > One but I haven't mentioned in the emails is that when subdev drivers call > ops in other subdev drivers they pass NULL in the state. This is fine for > the "old" drivers, as they expect a state only for TRY case. However, the > "new" drivers unfortunately expect to get a state on both TRY and ACTIVE > cases, and the only sensible way I figured out to handle this was the > v4l2_subdev_validate_state() function (patch 6). > > So, all this could be much neater, but would require modifying all subdev > drivers in non-trivial ways. I think this is something that can be done > slowly in the future. > > > > > > if (IS_ERR(sd_state)) > > > > > return PTR_ERR(sd_state); > > > > > > > > > > diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c > > > > > index e40bca254b8b..63ea5e472c33 100644 > > > > > --- a/drivers/media/platform/vsp1/vsp1_entity.c > > > > > +++ b/drivers/media/platform/vsp1/vsp1_entity.c > > > > > @@ -675,7 +675,7 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity, > > > > > * Allocate the pad configuration to store formats and selection > > > > > * rectangles. > > > > > */ > > > > > - entity->config = v4l2_alloc_subdev_state(&entity->subdev); > > > > > + entity->config = v4l2_alloc_subdev_state(&entity->subdev, V4L2_SUBDEV_FORMAT_ACTIVE); > > > > > if (IS_ERR(entity->config)) { > > > > > media_entity_cleanup(&entity->subdev.entity); > > > > > return PTR_ERR(entity->config); > > > > > diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c > > > > > index e1a794f69815..04ad319fb150 100644 > > > > > --- a/drivers/media/v4l2-core/v4l2-subdev.c > > > > > +++ b/drivers/media/v4l2-core/v4l2-subdev.c > > > > > @@ -28,7 +28,7 @@ static int subdev_fh_init(struct v4l2_subdev_fh *fh, struct v4l2_subdev *sd) > > > > > { > > > > > struct v4l2_subdev_state *state; > > > > > > > > > > - state = v4l2_alloc_subdev_state(sd); > > > > > + state = v4l2_alloc_subdev_state(sd, V4L2_SUBDEV_FORMAT_TRY); > > > > > > > > At the same time I'm not sure I get the purpose of this. Don't > > > > init_cfg() callback implementations deal with try formats themeselves > > > > ? I mean, it's not a fixed rule, they can as well initialize their > > > > default 'active' formats, but what matters is that they initialize > > > > their per-fh try states ? > > > > > > That is what they do currently. init_cfg() only deals with TRY state, as > > > that's the only "state" (i.e. pad_config) there used to be from v4l2 core's > > > perspective. > > > > > > > Shouldn't init_cfg receive the fh's state so that it can initialize > > > > it, and just in case they need to, access their subdev's state and > > > > initialize them ? I'm missing what the purpose of the flag is tbh. > > > > > > Now we have (a possibility to have) state for both TRY and ACTIVE on the > > > v4l2 core side. The active state has to be initialized also, and a logical > > > way to do that is to use the init_cfg(). > > > > The 'ACTIVE' state is stored in the subdev, to which init_cfg() has > > access, and it receives the 'TRY' state as a parameter. > > No, init_cfg gets either ACTIVE or TRY state, whichever is being allocated. > For "old" drivers, ACTIVE state is never allocated so they don't get > init_cfg calls for ACTIVE at all. > > Aaand while writing that, I realized that some drivers manually do allocate > ACTIVE state temporarily, which would cause init_cfg with ACTIVE state to be > called. I wonder if they explode... Need to check. > > > It is possible to access both states and initialize them properly if > > I'm not mistaken. > > > > > > > > So now, for drivers that support the new active state, init_cfg() can get > > > either TRY or ACTIVE state. And if you want to call, say, the driver's > > > set_routing() to setup the routing in the state, you have to set the 'which' > > > in the routing struct to a value. So somehow init_cfg needs to know if it's > > > initializing an ACTIVE or TRY state. > > > > I'm not sure I got this part. set_routing() as other ops will receive > > a state and 'which'. If my proposal above makes sensem where the state > > Yes, but if it's init_cfg calling set_routing, init_cfg has to figure out > the 'which' from somewhere. > > E.g. init_cfg from ub913 driver: > > static int ub913_init_cfg(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state) > { > u32 which = state->which; > > struct v4l2_subdev_route routes[] = { > { > .sink_pad = 0, > .sink_stream = 0, > .source_pad = 1, > .source_stream = 0, > .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, > }, > }; > > struct v4l2_subdev_krouting routing = { > .which = which, > .num_routes = ARRAY_SIZE(routes), > .routes = routes, > }; > > return ub913_set_routing(sd, state, &routing); > } > > It uses set_routing to setup a default routing (and set_routing in turn also > initializes the formats), but set_routing needs 'which'. > > Tomi