[PATCH v4 00/20] nubus: bus, device, bridge, IRQ and address space improvements

[PATCH v4 00/20] nubus: bus, device, bridge, IRQ and address space improvements

[Mark Cave-Ayland]

This patchset is the next set of changes required to boot MacOS on the q800 machine. The
main aim of these patches is to improve the Nubus support so that devices can be plugged
into the Nubus from the command line i.e.

    -device nubus-macfb[,slot=num][,romfile=decl.rom]

At the moment the only device that can be plugged into the Nubus is the macfb framebuffer
however with these changes it is possible to take a ROM from a real Nubus card and
attempt to use it in QEMU, and also allow for future interfaces such as virtio.

Patches 1 to 6 move the logic which manages bus addresses from the NubusDevice into
the NubusBus itself, including the introduction of a bitmap to manage available
slots on the bus.

Patches 7 and 8 change the handling for unassigned (empty) slots to generate a bus
fault and add trace events to allow logging of empty slot accesses during Nubus
enumeration.

Patches 9 to 11 remove the existing stubs for generating the format block (the epilogue
of the Nubus device embedded ROM consisting of metadata and a checksum) and replace them
with a romfile device property to allow the entire Nubus ROM to be loaded from a file
into the ROM area, similar to a PCI option ROM.

Patch 12 moves the Nubus into its own separate address space whilst patches 13 to 17
update the NubusBridge (and MacNubusBridge) devices to allow machines to map the
required slots from the Nubus address space using sysbus_mmio_map().

Finally patches 18 to 20 add support for Nubus IRQs and wire them up appropriately for
the q800 machine through VIA2, which is required for the next set of macfb updates.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>


v4:
- Rebase onto master
- Pass &error_abort to memory_region_init_rom() in patch 11
- Change warn_error() to error_setg() and tweak message in patch 11

v3:
- Rebase onto master
- Add Phil's R-B for patch 7
- Move NUBUS_FIRST_SLOT/NUBUS_LAST_SLOT check to end of nubus_device_realize() in patch 4
- Use BIT() macro in patches 4 and 20

v2:
- Rebase onto master
- Tweak the cover letter by adding the optional slot parameter in the -device example
- Add R-B tags from Phil
- Document the increase in max_access_size in patch 7
- Change the maximum declaration ROM size to 128KiB using (128 * KiB) in patch 11
- use MAKE_64BIT_MASK() in patches 4 and 16


Mark Cave-Ayland (20):
  nubus-device: rename slot_nb variable to slot
  nubus-device: expose separate super slot memory region
  nubus-device: add device slot parameter
  nubus: use bitmap to manage available slots
  nubus: move slot bitmap checks from NubusDevice realize() to BusClass
    check_address()
  nubus: implement BusClass get_dev_path()
  nubus: add trace-events for empty slot accesses
  nubus: generate bus error when attempting to access empty slots
  macfb: don't register declaration ROM
  nubus-device: remove nubus_register_rom() and
    nubus_register_format_block()
  nubus-device: add romfile property for loading declaration ROMs
  nubus: move nubus to its own 32-bit address space
  nubus-bridge: introduce separate NubusBridge structure
  mac-nubus-bridge: rename MacNubusState to MacNubusBridge
  nubus: move NubusBus from mac-nubus-bridge to nubus-bridge
  nubus-bridge: embed the NubusBus object directly within nubus-bridge
  nubus-bridge: make slot_available_mask a qdev property
  nubus: add support for slot IRQs
  q800: wire up nubus IRQs
  q800: configure nubus available slots for Quadra 800

 hw/display/macfb.c                  |   6 -
 hw/m68k/q800.c                      |  24 ++-
 hw/nubus/mac-nubus-bridge.c         |  28 +++-
 hw/nubus/nubus-bridge.c             |  23 ++-
 hw/nubus/nubus-bus.c                | 117 +++++++++++---
 hw/nubus/nubus-device.c             | 227 ++++++++--------------------
 hw/nubus/trace-events               |   7 +
 hw/nubus/trace.h                    |   1 +
 include/hw/nubus/mac-nubus-bridge.h |   9 +-
 include/hw/nubus/nubus.h            |  48 +++---
 meson.build                         |   1 +
 11 files changed, 265 insertions(+), 226 deletions(-)
 create mode 100644 hw/nubus/trace-events
 create mode 100644 hw/nubus/trace.h

-- 
2.20.1

[PATCH v4 01/20] nubus-device: rename slot_nb variable to slot

[Mark Cave-Ayland]

This is in preparation for creating a qdev property of the same name.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/nubus/nubus-device.c  | 14 +++++++-------
 include/hw/nubus/nubus.h |  2 +-
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index ffe78a8823..be01269563 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -87,7 +87,7 @@ static void nubus_register_format_block(NubusDevice *dev)
     char *fblock_name;
 
     fblock_name = g_strdup_printf("nubus-slot-%d-format-block",
-                                  dev->slot_nb);
+                                  dev->slot);
 
     hwaddr fblock_offset = memory_region_size(&dev->slot_mem) - FBLOCK_SIZE;
     memory_region_init_io(&dev->fblock_io, NULL, &nubus_format_block_ops,
@@ -142,7 +142,7 @@ void nubus_register_rom(NubusDevice *dev, const uint8_t *rom, uint32_t size,
     /* ROM */
 
     dev->rom = rom;
-    rom_name = g_strdup_printf("nubus-slot-%d-rom", dev->slot_nb);
+    rom_name = g_strdup_printf("nubus-slot-%d-rom", dev->slot);
     memory_region_init_io(&dev->rom_io, NULL, &mac_nubus_rom_ops,
                           dev, rom_name, size);
     memory_region_set_readonly(&dev->rom_io, true);
@@ -167,12 +167,12 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
         return;
     }
 
-    nd->slot_nb = nubus->current_slot++;
-    name = g_strdup_printf("nubus-slot-%d", nd->slot_nb);
+    nd->slot = nubus->current_slot++;
+    name = g_strdup_printf("nubus-slot-%d", nd->slot);
 
-    if (nd->slot_nb < NUBUS_FIRST_SLOT) {
+    if (nd->slot < NUBUS_FIRST_SLOT) {
         /* Super */
-        slot_offset = (nd->slot_nb - 6) * NUBUS_SUPER_SLOT_SIZE;
+        slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
 
         memory_region_init(&nd->slot_mem, OBJECT(dev), name,
                            NUBUS_SUPER_SLOT_SIZE);
@@ -180,7 +180,7 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
                                     &nd->slot_mem);
     } else {
         /* Normal */
-        slot_offset = nd->slot_nb * NUBUS_SLOT_SIZE;
+        slot_offset = nd->slot * NUBUS_SLOT_SIZE;
 
         memory_region_init(&nd->slot_mem, OBJECT(dev), name, NUBUS_SLOT_SIZE);
         memory_region_add_subregion(&nubus->slot_io, slot_offset,
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index e2b5cf260b..424309dd73 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -42,7 +42,7 @@ struct NubusBus {
 struct NubusDevice {
     DeviceState qdev;
 
-    int slot_nb;
+    int slot;
     MemoryRegion slot_mem;
 
     /* Format Block */
-- 
2.20.1

[PATCH v4 02/20] nubus-device: expose separate super slot memory region

[Mark Cave-Ayland]

According to "Designing Cards and Drivers for the Macintosh Family" each physical
nubus slot can access 2 separate address ranges: a super slot memory region which
is 256MB and a standard slot memory region which is 16MB.

Currently a Nubus device uses the physical slot number to determine whether it is
using a standard slot memory region or a super slot memory region rather than
exposing both memory regions for use as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/nubus/nubus-device.c  | 36 ++++++++++++++++++------------------
 include/hw/nubus/nubus.h |  1 +
 2 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index be01269563..36203848e5 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -168,26 +168,26 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
     }
 
     nd->slot = nubus->current_slot++;
-    name = g_strdup_printf("nubus-slot-%d", nd->slot);
-
-    if (nd->slot < NUBUS_FIRST_SLOT) {
-        /* Super */
-        slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
-
-        memory_region_init(&nd->slot_mem, OBJECT(dev), name,
-                           NUBUS_SUPER_SLOT_SIZE);
-        memory_region_add_subregion(&nubus->super_slot_io, slot_offset,
-                                    &nd->slot_mem);
-    } else {
-        /* Normal */
-        slot_offset = nd->slot * NUBUS_SLOT_SIZE;
-
-        memory_region_init(&nd->slot_mem, OBJECT(dev), name, NUBUS_SLOT_SIZE);
-        memory_region_add_subregion(&nubus->slot_io, slot_offset,
-                                    &nd->slot_mem);
-    }
 
+    /* Super */
+    slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
+
+    name = g_strdup_printf("nubus-super-slot-%x", nd->slot);
+    memory_region_init(&nd->super_slot_mem, OBJECT(dev), name,
+                        NUBUS_SUPER_SLOT_SIZE);
+    memory_region_add_subregion(&nubus->super_slot_io, slot_offset,
+                                &nd->super_slot_mem);
+    g_free(name);
+
+    /* Normal */
+    slot_offset = nd->slot * NUBUS_SLOT_SIZE;
+
+    name = g_strdup_printf("nubus-slot-%x", nd->slot);
+    memory_region_init(&nd->slot_mem, OBJECT(dev), name, NUBUS_SLOT_SIZE);
+    memory_region_add_subregion(&nubus->slot_io, slot_offset,
+                                &nd->slot_mem);
     g_free(name);
+
     nubus_register_format_block(nd);
 }
 
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 424309dd73..89b0976aaa 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -43,6 +43,7 @@ struct NubusDevice {
     DeviceState qdev;
 
     int slot;
+    MemoryRegion super_slot_mem;
     MemoryRegion slot_mem;
 
     /* Format Block */
-- 
2.20.1

[PATCH v4 03/20] nubus-device: add device slot parameter

[Mark Cave-Ayland]

This prepares for allowing Nubus devices to be placed in a specific slot instead
of always being auto-allocated by the bus itself.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nubus/nubus-device.c  | 6 ++++++
 include/hw/nubus/nubus.h | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index 36203848e5..c1832f73da 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -191,12 +191,18 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
     nubus_register_format_block(nd);
 }
 
+static Property nubus_device_properties[] = {
+    DEFINE_PROP_INT32("slot", NubusDevice, slot, -1),
+    DEFINE_PROP_END_OF_LIST()
+};
+
 static void nubus_device_class_init(ObjectClass *oc, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
 
     dc->realize = nubus_device_realize;
     dc->bus_type = TYPE_NUBUS_BUS;
+    device_class_set_props(dc, nubus_device_properties);
 }
 
 static const TypeInfo nubus_device_type_info = {
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 89b0976aaa..357f621d15 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -42,7 +42,7 @@ struct NubusBus {
 struct NubusDevice {
     DeviceState qdev;
 
-    int slot;
+    int32_t slot;
     MemoryRegion super_slot_mem;
     MemoryRegion slot_mem;
 
-- 
2.20.1

[PATCH v4 04/20] nubus: use bitmap to manage available slots

[Mark Cave-Ayland]

Convert nubus_device_realize() to use a bitmap to manage available slots to allow
for future Nubus devices to be plugged into arbitrary slots from the command line.

Update mac_nubus_bridge_init() to only allow slots 0x9 to 0xe on a Macintosh
machines as documented in "Desigining Cards and Drivers for the Macintosh Family".

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nubus/mac-nubus-bridge.c |  3 +++
 hw/nubus/nubus-bus.c        |  2 +-
 hw/nubus/nubus-device.c     | 29 +++++++++++++++++++++++++----
 include/hw/nubus/nubus.h    |  4 ++--
 4 files changed, 31 insertions(+), 7 deletions(-)

diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
index 7c329300b8..c1d77e2bc7 100644
--- a/hw/nubus/mac-nubus-bridge.c
+++ b/hw/nubus/mac-nubus-bridge.c
@@ -18,6 +18,9 @@ static void mac_nubus_bridge_init(Object *obj)
 
     s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
 
+    /* Macintosh only has slots 0x9 to 0xe available */
+    s->bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);
+
     sysbus_init_mmio(sbd, &s->bus->super_slot_io);
     sysbus_init_mmio(sbd, &s->bus->slot_io);
 }
diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
index 5c13452308..404c1032e0 100644
--- a/hw/nubus/nubus-bus.c
+++ b/hw/nubus/nubus-bus.c
@@ -84,7 +84,7 @@ static void nubus_init(Object *obj)
                           nubus, "nubus-slots",
                           NUBUS_SLOT_NB * NUBUS_SLOT_SIZE);
 
-    nubus->current_slot = NUBUS_FIRST_SLOT;
+    nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
 }
 
 static void nubus_class_init(ObjectClass *oc, void *data)
diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index c1832f73da..d91a1e4af3 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -160,14 +160,35 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
     NubusDevice *nd = NUBUS_DEVICE(dev);
     char *name;
     hwaddr slot_offset;
+    uint16_t s;
+
+    if (nd->slot == -1) {
+        /* No slot specified, find first available free slot */
+        s = ctz32(nubus->slot_available_mask);
+        if (s != 32) {
+            nd->slot = s;
+        } else {
+            error_setg(errp, "Cannot register nubus card, no free slot "
+                             "available");
+            return;
+        }
+    } else {
+        /* Slot specified, make sure the slot is available */
+        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
+            error_setg(errp, "Cannot register nubus card, slot %d is "
+                             "unavailable or already occupied", nd->slot);
+            return;
+        }
+    }
 
-    if (nubus->current_slot < NUBUS_FIRST_SLOT ||
-            nubus->current_slot > NUBUS_LAST_SLOT) {
-        error_setg(errp, "Cannot register nubus card, not enough slots");
+    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
+        error_setg(errp, "Cannot register nubus card, slot must be "
+                         "between %d and %d", NUBUS_FIRST_SLOT,
+                         NUBUS_LAST_SLOT);
         return;
     }
 
-    nd->slot = nubus->current_slot++;
+    nubus->slot_available_mask &= ~BIT(nd->slot);
 
     /* Super */
     slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 357f621d15..8ff4736259 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -19,7 +19,7 @@
 #define NUBUS_SLOT_SIZE       0x01000000
 #define NUBUS_SLOT_NB         0xF
 
-#define NUBUS_FIRST_SLOT      0x9
+#define NUBUS_FIRST_SLOT      0x0
 #define NUBUS_LAST_SLOT       0xF
 
 #define TYPE_NUBUS_DEVICE "nubus-device"
@@ -36,7 +36,7 @@ struct NubusBus {
     MemoryRegion super_slot_io;
     MemoryRegion slot_io;
 
-    int current_slot;
+    uint32_t slot_available_mask;
 };
 
 struct NubusDevice {
-- 
2.20.1

[PATCH v4 05/20] nubus: move slot bitmap checks from NubusDevice realize() to BusClass check_address()

[Mark Cave-Ayland]

Allow Nubus to manage the slot allocations itself using the BusClass check_address()
virtual function rather than managing this during NubusDevice realize().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nubus/nubus-bus.c    | 37 +++++++++++++++++++++++++++++++++++++
 hw/nubus/nubus-device.c | 29 -----------------------------
 2 files changed, 37 insertions(+), 29 deletions(-)

diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
index 404c1032e0..141876b579 100644
--- a/hw/nubus/nubus-bus.c
+++ b/hw/nubus/nubus-bus.c
@@ -87,11 +87,48 @@ static void nubus_init(Object *obj)
     nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
 }
 
+static bool nubus_check_address(BusState *bus, DeviceState *dev, Error **errp)
+{
+    NubusDevice *nd = NUBUS_DEVICE(dev);
+    NubusBus *nubus = NUBUS_BUS(bus);
+    uint16_t s;
+
+    if (nd->slot == -1) {
+        /* No slot specified, find first available free slot */
+        s = ctz32(nubus->slot_available_mask);
+        if (s != 32) {
+            nd->slot = s;
+        } else {
+            error_setg(errp, "Cannot register nubus card, no free slot "
+                             "available");
+            return false;
+        }
+    } else {
+        /* Slot specified, make sure the slot is available */
+        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
+            error_setg(errp, "Cannot register nubus card, slot %d is "
+                             "unavailable or already occupied", nd->slot);
+            return false;
+        }
+    }
+
+    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
+        error_setg(errp, "Cannot register nubus card, slot must be "
+                         "between %d and %d", NUBUS_FIRST_SLOT,
+                         NUBUS_LAST_SLOT);
+        return false;
+    }
+
+    nubus->slot_available_mask &= ~BIT(nd->slot);
+    return true;
+}
+
 static void nubus_class_init(ObjectClass *oc, void *data)
 {
     BusClass *bc = BUS_CLASS(oc);
 
     bc->realize = nubus_realize;
+    bc->check_address = nubus_check_address;
 }
 
 static const TypeInfo nubus_bus_info = {
diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index d91a1e4af3..7a32c8c95b 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -160,35 +160,6 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
     NubusDevice *nd = NUBUS_DEVICE(dev);
     char *name;
     hwaddr slot_offset;
-    uint16_t s;
-
-    if (nd->slot == -1) {
-        /* No slot specified, find first available free slot */
-        s = ctz32(nubus->slot_available_mask);
-        if (s != 32) {
-            nd->slot = s;
-        } else {
-            error_setg(errp, "Cannot register nubus card, no free slot "
-                             "available");
-            return;
-        }
-    } else {
-        /* Slot specified, make sure the slot is available */
-        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
-            error_setg(errp, "Cannot register nubus card, slot %d is "
-                             "unavailable or already occupied", nd->slot);
-            return;
-        }
-    }
-
-    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
-        error_setg(errp, "Cannot register nubus card, slot must be "
-                         "between %d and %d", NUBUS_FIRST_SLOT,
-                         NUBUS_LAST_SLOT);
-        return;
-    }
-
-    nubus->slot_available_mask &= ~BIT(nd->slot);
 
     /* Super */
     slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
-- 
2.20.1

[PATCH v4 06/20] nubus: implement BusClass get_dev_path()

[Mark Cave-Ayland]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/nubus/nubus-bus.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
index 141876b579..63e7d66b95 100644
--- a/hw/nubus/nubus-bus.c
+++ b/hw/nubus/nubus-bus.c
@@ -87,6 +87,21 @@ static void nubus_init(Object *obj)
     nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
 }
 
+static char *nubus_get_dev_path(DeviceState *dev)
+{
+    NubusDevice *nd = NUBUS_DEVICE(dev);
+    BusState *bus = qdev_get_parent_bus(dev);
+    char *p = qdev_get_dev_path(bus->parent);
+
+    if (p) {
+        char *ret = g_strdup_printf("%s/%s/%02x", p, bus->name, nd->slot);
+        g_free(p);
+        return ret;
+    } else {
+        return g_strdup_printf("%s/%02x", bus->name, nd->slot);
+    }
+}
+
 static bool nubus_check_address(BusState *bus, DeviceState *dev, Error **errp)
 {
     NubusDevice *nd = NUBUS_DEVICE(dev);
@@ -129,6 +144,7 @@ static void nubus_class_init(ObjectClass *oc, void *data)
 
     bc->realize = nubus_realize;
     bc->check_address = nubus_check_address;
+    bc->get_dev_path = nubus_get_dev_path;
 }
 
 static const TypeInfo nubus_bus_info = {
-- 
2.20.1

[PATCH v4 07/20] nubus: add trace-events for empty slot accesses

[Mark Cave-Ayland]

Increase the max_access_size to 4 bytes for empty Nubus slot and super slot
accesses to allow tracing of the Nubus enumeration process by the guest OS.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/nubus/nubus-bus.c  | 10 +++++++---
 hw/nubus/trace-events |  7 +++++++
 hw/nubus/trace.h      |  1 +
 meson.build           |  1 +
 4 files changed, 16 insertions(+), 3 deletions(-)
 create mode 100644 hw/nubus/trace-events
 create mode 100644 hw/nubus/trace.h

diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
index 63e7d66b95..39182db065 100644
--- a/hw/nubus/nubus-bus.c
+++ b/hw/nubus/nubus-bus.c
@@ -11,6 +11,7 @@
 #include "qemu/osdep.h"
 #include "hw/nubus/nubus.h"
 #include "qapi/error.h"
+#include "trace.h"
 
 
 static NubusBus *nubus_find(void)
@@ -23,12 +24,13 @@ static void nubus_slot_write(void *opaque, hwaddr addr, uint64_t val,
                              unsigned int size)
 {
     /* read only */
+    trace_nubus_slot_write(addr, val, size);
 }
 
-
 static uint64_t nubus_slot_read(void *opaque, hwaddr addr,
                                 unsigned int size)
 {
+    trace_nubus_slot_read(addr, size);
     return 0;
 }
 
@@ -38,7 +40,7 @@ static const MemoryRegionOps nubus_slot_ops = {
     .endianness = DEVICE_BIG_ENDIAN,
     .valid = {
         .min_access_size = 1,
-        .max_access_size = 1,
+        .max_access_size = 4,
     },
 };
 
@@ -46,11 +48,13 @@ static void nubus_super_slot_write(void *opaque, hwaddr addr, uint64_t val,
                                    unsigned int size)
 {
     /* read only */
+    trace_nubus_super_slot_write(addr, val, size);
 }
 
 static uint64_t nubus_super_slot_read(void *opaque, hwaddr addr,
                                       unsigned int size)
 {
+    trace_nubus_super_slot_read(addr, size);
     return 0;
 }
 
@@ -60,7 +64,7 @@ static const MemoryRegionOps nubus_super_slot_ops = {
     .endianness = DEVICE_BIG_ENDIAN,
     .valid = {
         .min_access_size = 1,
-        .max_access_size = 1,
+        .max_access_size = 4,
     },
 };
 
diff --git a/hw/nubus/trace-events b/hw/nubus/trace-events
new file mode 100644
index 0000000000..e31833d694
--- /dev/null
+++ b/hw/nubus/trace-events
@@ -0,0 +1,7 @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# nubus-bus.c
+nubus_slot_read(uint64_t addr, int size) "reading unassigned addr 0x%"PRIx64 " size %d"
+nubus_slot_write(uint64_t addr, uint64_t val, int size) "writing unassigned addr 0x%"PRIx64 " value 0x%"PRIx64 " size %d"
+nubus_super_slot_read(uint64_t addr, int size) "reading unassigned addr 0x%"PRIx64 " size %d"
+nubus_super_slot_write(uint64_t addr, uint64_t val, int size) "writing unassigned addr 0x%"PRIx64 " value 0x%"PRIx64 " size %d"
diff --git a/hw/nubus/trace.h b/hw/nubus/trace.h
new file mode 100644
index 0000000000..3749420da1
--- /dev/null
+++ b/hw/nubus/trace.h
@@ -0,0 +1 @@
+#include "trace/trace-hw_nubus.h"
diff --git a/meson.build b/meson.build
index 2711cbb789..612ce671b5 100644
--- a/meson.build
+++ b/meson.build
@@ -2135,6 +2135,7 @@ if have_system
     'hw/misc/macio',
     'hw/net',
     'hw/net/can',
+    'hw/nubus',
     'hw/nvme',
     'hw/nvram',
     'hw/pci',
-- 
2.20.1

[PATCH v4 08/20] nubus: generate bus error when attempting to access empty slots

[Mark Cave-Ayland]

According to "Designing Cards and Drivers for the Macintosh Family" any attempt
to access an unimplemented address location on Nubus generates a bus error. MacOS
uses a custom bus error handler to detect empty Nubus slots, and with the current
implementation assumes that all slots are occupied as the Nubus transactions
never fail.

Switch nubus_slot_ops and nubus_super_slot_ops over to use {read,write}_with_attrs
and hard-code them to return MEMTX_DECODE_ERROR so that unoccupied Nubus slots
will generate the expected bus error.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/nubus/nubus-bus.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
index 39182db065..a617459a4f 100644
--- a/hw/nubus/nubus-bus.c
+++ b/hw/nubus/nubus-bus.c
@@ -20,23 +20,23 @@ static NubusBus *nubus_find(void)
     return NUBUS_BUS(object_resolve_path_type("", TYPE_NUBUS_BUS, NULL));
 }
 
-static void nubus_slot_write(void *opaque, hwaddr addr, uint64_t val,
-                             unsigned int size)
+static MemTxResult nubus_slot_write(void *opaque, hwaddr addr, uint64_t val,
+                                    unsigned size, MemTxAttrs attrs)
 {
-    /* read only */
     trace_nubus_slot_write(addr, val, size);
+    return MEMTX_DECODE_ERROR;
 }
 
-static uint64_t nubus_slot_read(void *opaque, hwaddr addr,
-                                unsigned int size)
+static MemTxResult nubus_slot_read(void *opaque, hwaddr addr, uint64_t *data,
+                                   unsigned size, MemTxAttrs attrs)
 {
     trace_nubus_slot_read(addr, size);
-    return 0;
+    return MEMTX_DECODE_ERROR;
 }
 
 static const MemoryRegionOps nubus_slot_ops = {
-    .read  = nubus_slot_read,
-    .write = nubus_slot_write,
+    .read_with_attrs  = nubus_slot_read,
+    .write_with_attrs = nubus_slot_write,
     .endianness = DEVICE_BIG_ENDIAN,
     .valid = {
         .min_access_size = 1,
@@ -44,23 +44,25 @@ static const MemoryRegionOps nubus_slot_ops = {
     },
 };
 
-static void nubus_super_slot_write(void *opaque, hwaddr addr, uint64_t val,
-                                   unsigned int size)
+static MemTxResult nubus_super_slot_write(void *opaque, hwaddr addr,
+                                          uint64_t val, unsigned size,
+                                          MemTxAttrs attrs)
 {
-    /* read only */
     trace_nubus_super_slot_write(addr, val, size);
+    return MEMTX_DECODE_ERROR;
 }
 
-static uint64_t nubus_super_slot_read(void *opaque, hwaddr addr,
-                                      unsigned int size)
+static MemTxResult nubus_super_slot_read(void *opaque, hwaddr addr,
+                                         uint64_t *data, unsigned size,
+                                         MemTxAttrs attrs)
 {
     trace_nubus_super_slot_read(addr, size);
-    return 0;
+    return MEMTX_DECODE_ERROR;
 }
 
 static const MemoryRegionOps nubus_super_slot_ops = {
-    .read  = nubus_super_slot_read,
-    .write = nubus_super_slot_write,
+    .read_with_attrs = nubus_super_slot_read,
+    .write_with_attrs = nubus_super_slot_write,
     .endianness = DEVICE_BIG_ENDIAN,
     .valid = {
         .min_access_size = 1,
-- 
2.20.1

[PATCH v4 09/20] macfb: don't register declaration ROM

[Mark Cave-Ayland]

The macfb device is an on-board framebuffer and so is initialised by the
system declaration ROM included within the MacOS toolbox ROM.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/display/macfb.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/hw/display/macfb.c b/hw/display/macfb.c
index d8183b9bbd..76808b69cc 100644
--- a/hw/display/macfb.c
+++ b/hw/display/macfb.c
@@ -383,10 +383,6 @@ static void macfb_sysbus_realize(DeviceState *dev, Error **errp)
     sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
 }
 
-const uint8_t macfb_rom[] = {
-    255, 0, 0, 0,
-};
-
 static void macfb_nubus_realize(DeviceState *dev, Error **errp)
 {
     NubusDevice *nd = NUBUS_DEVICE(dev);
@@ -399,8 +395,6 @@ static void macfb_nubus_realize(DeviceState *dev, Error **errp)
     macfb_common_realize(dev, ms, errp);
     memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, &ms->mem_ctrl);
     memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, &ms->mem_vram);
-
-    nubus_register_rom(nd, macfb_rom, sizeof(macfb_rom), 1, 9, 0xf);
 }
 
 static void macfb_sysbus_reset(DeviceState *d)
-- 
2.20.1

[PATCH v4 10/20] nubus-device: remove nubus_register_rom() and nubus_register_format_block()

[Mark Cave-Ayland]

Since there is no need to generate a dummy declaration ROM, remove both
nubus_register_rom() and nubus_register_format_block(). These will shortly be
replaced with a mechanism to optionally load a declaration ROM from disk to
allow real images to be used within QEMU.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nubus/nubus-device.c  | 143 ---------------------------------------
 include/hw/nubus/nubus.h |  19 ------
 2 files changed, 162 deletions(-)

diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index 7a32c8c95b..9c1992ceb0 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -13,147 +13,6 @@
 #include "qapi/error.h"
 
 
-/* The Format Block Structure */
-
-#define FBLOCK_DIRECTORY_OFFSET 0
-#define FBLOCK_LENGTH           4
-#define FBLOCK_CRC              8
-#define FBLOCK_REVISION_LEVEL   12
-#define FBLOCK_FORMAT           13
-#define FBLOCK_TEST_PATTERN     14
-#define FBLOCK_RESERVED         18
-#define FBLOCK_BYTE_LANES       19
-
-#define FBLOCK_SIZE             20
-#define FBLOCK_PATTERN_VAL      0x5a932bc7
-
-static uint64_t nubus_fblock_read(void *opaque, hwaddr addr, unsigned int size)
-{
-    NubusDevice *dev = opaque;
-    uint64_t val;
-
-#define BYTE(v, b) (((v) >> (24 - 8 * (b))) & 0xff)
-    switch (addr) {
-    case FBLOCK_BYTE_LANES:
-        val = dev->byte_lanes;
-        val |= (val ^ 0xf) << 4;
-        break;
-    case FBLOCK_RESERVED:
-        val = 0x00;
-        break;
-    case FBLOCK_TEST_PATTERN...FBLOCK_TEST_PATTERN + 3:
-        val = BYTE(FBLOCK_PATTERN_VAL, addr - FBLOCK_TEST_PATTERN);
-        break;
-    case FBLOCK_FORMAT:
-        val = dev->rom_format;
-        break;
-    case FBLOCK_REVISION_LEVEL:
-        val = dev->rom_rev;
-        break;
-    case FBLOCK_CRC...FBLOCK_CRC + 3:
-        val = BYTE(dev->rom_crc, addr - FBLOCK_CRC);
-        break;
-    case FBLOCK_LENGTH...FBLOCK_LENGTH + 3:
-        val = BYTE(dev->rom_length, addr - FBLOCK_LENGTH);
-        break;
-    case FBLOCK_DIRECTORY_OFFSET...FBLOCK_DIRECTORY_OFFSET + 3:
-        val = BYTE(dev->directory_offset, addr - FBLOCK_DIRECTORY_OFFSET);
-        break;
-    default:
-        val = 0;
-        break;
-    }
-    return val;
-}
-
-static void nubus_fblock_write(void *opaque, hwaddr addr, uint64_t val,
-                               unsigned int size)
-{
-    /* read only */
-}
-
-static const MemoryRegionOps nubus_format_block_ops = {
-    .read = nubus_fblock_read,
-    .write = nubus_fblock_write,
-    .endianness = DEVICE_BIG_ENDIAN,
-    .valid = {
-        .min_access_size = 1,
-        .max_access_size = 1,
-    }
-};
-
-static void nubus_register_format_block(NubusDevice *dev)
-{
-    char *fblock_name;
-
-    fblock_name = g_strdup_printf("nubus-slot-%d-format-block",
-                                  dev->slot);
-
-    hwaddr fblock_offset = memory_region_size(&dev->slot_mem) - FBLOCK_SIZE;
-    memory_region_init_io(&dev->fblock_io, NULL, &nubus_format_block_ops,
-                          dev, fblock_name, FBLOCK_SIZE);
-    memory_region_add_subregion(&dev->slot_mem, fblock_offset,
-                                &dev->fblock_io);
-
-    g_free(fblock_name);
-}
-
-static void mac_nubus_rom_write(void *opaque, hwaddr addr, uint64_t val,
-                                       unsigned int size)
-{
-    /* read only */
-}
-
-static uint64_t mac_nubus_rom_read(void *opaque, hwaddr addr,
-                                    unsigned int size)
-{
-    NubusDevice *dev = opaque;
-
-    return dev->rom[addr];
-}
-
-static const MemoryRegionOps mac_nubus_rom_ops = {
-    .read  = mac_nubus_rom_read,
-    .write = mac_nubus_rom_write,
-    .endianness = DEVICE_BIG_ENDIAN,
-    .valid = {
-        .min_access_size = 1,
-        .max_access_size = 1,
-    },
-};
-
-
-void nubus_register_rom(NubusDevice *dev, const uint8_t *rom, uint32_t size,
-                        int revision, int format, uint8_t byte_lanes)
-{
-    hwaddr rom_offset;
-    char *rom_name;
-
-    /* FIXME : really compute CRC */
-    dev->rom_length = 0;
-    dev->rom_crc = 0;
-
-    dev->rom_rev = revision;
-    dev->rom_format = format;
-
-    dev->byte_lanes = byte_lanes;
-    dev->directory_offset = -size;
-
-    /* ROM */
-
-    dev->rom = rom;
-    rom_name = g_strdup_printf("nubus-slot-%d-rom", dev->slot);
-    memory_region_init_io(&dev->rom_io, NULL, &mac_nubus_rom_ops,
-                          dev, rom_name, size);
-    memory_region_set_readonly(&dev->rom_io, true);
-
-    rom_offset = memory_region_size(&dev->slot_mem) - FBLOCK_SIZE +
-                 dev->directory_offset;
-    memory_region_add_subregion(&dev->slot_mem, rom_offset, &dev->rom_io);
-
-    g_free(rom_name);
-}
-
 static void nubus_device_realize(DeviceState *dev, Error **errp)
 {
     NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(dev));
@@ -179,8 +38,6 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(&nubus->slot_io, slot_offset,
                                 &nd->slot_mem);
     g_free(name);
-
-    nubus_register_format_block(nd);
 }
 
 static Property nubus_device_properties[] = {
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 8ff4736259..87a97516c7 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -45,25 +45,6 @@ struct NubusDevice {
     int32_t slot;
     MemoryRegion super_slot_mem;
     MemoryRegion slot_mem;
-
-    /* Format Block */
-
-    MemoryRegion fblock_io;
-
-    uint32_t rom_length;
-    uint32_t rom_crc;
-    uint8_t rom_rev;
-    uint8_t rom_format;
-    uint8_t byte_lanes;
-    int32_t directory_offset;
-
-    /* ROM */
-
-    MemoryRegion rom_io;
-    const uint8_t *rom;
 };
 
-void nubus_register_rom(NubusDevice *dev, const uint8_t *rom, uint32_t size,
-                        int revision, int format, uint8_t byte_lanes);
-
 #endif
-- 
2.20.1

[PATCH v4 11/20] nubus-device: add romfile property for loading declaration ROMs

[Mark Cave-Ayland]

The declaration ROM is located at the top-most address of the standard slot
space.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nubus/nubus-device.c  | 44 +++++++++++++++++++++++++++++++++++++++-
 include/hw/nubus/nubus.h |  6 ++++++
 2 files changed, 49 insertions(+), 1 deletion(-)

diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index 9c1992ceb0..3da0db4d54 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -9,16 +9,21 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/datadir.h"
+#include "hw/loader.h"
 #include "hw/nubus/nubus.h"
 #include "qapi/error.h"
+#include "qemu/error-report.h"
 
 
 static void nubus_device_realize(DeviceState *dev, Error **errp)
 {
     NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(dev));
     NubusDevice *nd = NUBUS_DEVICE(dev);
-    char *name;
+    char *name, *path;
     hwaddr slot_offset;
+    int64_t size;
+    int ret;
 
     /* Super */
     slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
@@ -38,10 +43,47 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(&nubus->slot_io, slot_offset,
                                 &nd->slot_mem);
     g_free(name);
+
+    /* Declaration ROM */
+    if (nd->romfile != NULL) {
+        path = qemu_find_file(QEMU_FILE_TYPE_BIOS, nd->romfile);
+        if (path == NULL) {
+            path = g_strdup(nd->romfile);
+        }
+
+        size = get_image_size(path);
+        if (size < 0) {
+            error_setg(errp, "failed to find romfile \"%s\"", nd->romfile);
+            g_free(path);
+            return;
+        } else if (size == 0) {
+            error_setg(errp, "romfile \"%s\" is empty", nd->romfile);
+            g_free(path);
+            return;
+        } else if (size > NUBUS_DECL_ROM_MAX_SIZE) {
+            error_setg(errp, "romfile \"%s\" too large (maximum size 128K)",
+                       nd->romfile);
+            g_free(path);
+            return;
+        }
+
+        name = g_strdup_printf("nubus-slot-%x-declaration-rom", nd->slot);
+        memory_region_init_rom(&nd->decl_rom, OBJECT(dev), name, size,
+                               &error_abort);
+        ret = load_image_mr(path, &nd->decl_rom);
+        g_free(path);
+        if (ret < 0) {
+            error_setg(errp, "could not load romfile \"%s\"", nd->romfile);
+            return;
+        }
+        memory_region_add_subregion(&nd->slot_mem, NUBUS_SLOT_SIZE - size,
+                                    &nd->decl_rom);
+    }
 }
 
 static Property nubus_device_properties[] = {
     DEFINE_PROP_INT32("slot", NubusDevice, slot, -1),
+    DEFINE_PROP_STRING("romfile", NubusDevice, romfile),
     DEFINE_PROP_END_OF_LIST()
 };
 
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 87a97516c7..0c9f50c32e 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -12,6 +12,7 @@
 #include "hw/qdev-properties.h"
 #include "exec/address-spaces.h"
 #include "qom/object.h"
+#include "qemu/units.h"
 
 #define NUBUS_SUPER_SLOT_SIZE 0x10000000U
 #define NUBUS_SUPER_SLOT_NB   0x9
@@ -39,12 +40,17 @@ struct NubusBus {
     uint32_t slot_available_mask;
 };
 
+#define NUBUS_DECL_ROM_MAX_SIZE    (128 * KiB)
+
 struct NubusDevice {
     DeviceState qdev;
 
     int32_t slot;
     MemoryRegion super_slot_mem;
     MemoryRegion slot_mem;
+
+    char *romfile;
+    MemoryRegion decl_rom;
 };
 
 #endif
-- 
2.20.1

[PATCH v4 12/20] nubus: move nubus to its own 32-bit address space

[Mark Cave-Ayland]

According to "Designing Cards and Drivers for the Macintosh Family" the Nubus
has its own 32-bit address space based upon physical slot addressing.

Move Nubus to its own 32-bit address space and then use memory region aliases
to map available slot and super slot ranges into the q800 system address
space via the Macintosh Nubus bridge.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/m68k/q800.c                      |  8 +++-----
 hw/nubus/mac-nubus-bridge.c         | 15 +++++++++++++--
 hw/nubus/nubus-bus.c                | 18 ++++++++++++++++++
 hw/nubus/nubus-device.c             |  2 +-
 include/hw/nubus/mac-nubus-bridge.h |  2 ++
 include/hw/nubus/nubus.h            | 10 +++++++---
 6 files changed, 44 insertions(+), 11 deletions(-)

diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index 5ba87f789c..0a0051a296 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -67,9 +67,6 @@
 #define ASC_BASE              (IO_BASE + 0x14000)
 #define SWIM_BASE             (IO_BASE + 0x1E000)
 
-#define NUBUS_SUPER_SLOT_BASE 0x60000000
-#define NUBUS_SLOT_BASE       0xf0000000
-
 #define SONIC_PROM_SIZE       0x1000
 
 /*
@@ -396,8 +393,9 @@ static void q800_init(MachineState *machine)
 
     dev = qdev_new(TYPE_MAC_NUBUS_BRIDGE);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, NUBUS_SUPER_SLOT_BASE);
-    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 9 * NUBUS_SUPER_SLOT_SIZE);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
+                                            9 * NUBUS_SLOT_SIZE);
 
     nubus = MAC_NUBUS_BRIDGE(dev)->bus;
 
diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
index c1d77e2bc7..574bc7831e 100644
--- a/hw/nubus/mac-nubus-bridge.c
+++ b/hw/nubus/mac-nubus-bridge.c
@@ -21,8 +21,19 @@ static void mac_nubus_bridge_init(Object *obj)
     /* Macintosh only has slots 0x9 to 0xe available */
     s->bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);
 
-    sysbus_init_mmio(sbd, &s->bus->super_slot_io);
-    sysbus_init_mmio(sbd, &s->bus->slot_io);
+    /* Aliases for slots 0x9 to 0xe */
+    memory_region_init_alias(&s->super_slot_alias, obj, "super-slot-alias",
+                             &s->bus->nubus_mr,
+                             9 * NUBUS_SUPER_SLOT_SIZE,
+                             6 * NUBUS_SUPER_SLOT_SIZE);
+
+    memory_region_init_alias(&s->slot_alias, obj, "slot-alias",
+                             &s->bus->nubus_mr,
+                             NUBUS_SLOT_BASE + 9 * NUBUS_SLOT_SIZE,
+                             6 * NUBUS_SLOT_SIZE);
+
+    sysbus_init_mmio(sbd, &s->super_slot_alias);
+    sysbus_init_mmio(sbd, &s->slot_alias);
 }
 
 static void mac_nubus_bridge_class_init(ObjectClass *klass, void *data)
diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
index a617459a4f..ab3515fb75 100644
--- a/hw/nubus/nubus-bus.c
+++ b/hw/nubus/nubus-bus.c
@@ -70,25 +70,42 @@ static const MemoryRegionOps nubus_super_slot_ops = {
     },
 };
 
+static void nubus_unrealize(BusState *bus)
+{
+    NubusBus *nubus = NUBUS_BUS(bus);
+
+    address_space_destroy(&nubus->nubus_as);
+}
+
 static void nubus_realize(BusState *bus, Error **errp)
 {
+    NubusBus *nubus = NUBUS_BUS(bus);
+
     if (!nubus_find()) {
         error_setg(errp, "at most one %s device is permitted", TYPE_NUBUS_BUS);
         return;
     }
+
+    address_space_init(&nubus->nubus_as, &nubus->nubus_mr, "nubus");
 }
 
 static void nubus_init(Object *obj)
 {
     NubusBus *nubus = NUBUS_BUS(obj);
 
+    memory_region_init(&nubus->nubus_mr, obj, "nubus", 0x100000000);
+
     memory_region_init_io(&nubus->super_slot_io, obj, &nubus_super_slot_ops,
                           nubus, "nubus-super-slots",
                           NUBUS_SUPER_SLOT_NB * NUBUS_SUPER_SLOT_SIZE);
+    memory_region_add_subregion(&nubus->nubus_mr, 0x0, &nubus->super_slot_io);
 
     memory_region_init_io(&nubus->slot_io, obj, &nubus_slot_ops,
                           nubus, "nubus-slots",
                           NUBUS_SLOT_NB * NUBUS_SLOT_SIZE);
+    memory_region_add_subregion(&nubus->nubus_mr,
+                                NUBUS_SUPER_SLOT_NB * NUBUS_SUPER_SLOT_SIZE,
+                                &nubus->slot_io);
 
     nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
 }
@@ -149,6 +166,7 @@ static void nubus_class_init(ObjectClass *oc, void *data)
     BusClass *bc = BUS_CLASS(oc);
 
     bc->realize = nubus_realize;
+    bc->unrealize = nubus_unrealize;
     bc->check_address = nubus_check_address;
     bc->get_dev_path = nubus_get_dev_path;
 }
diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index 3da0db4d54..9cecb487a1 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -26,7 +26,7 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
     int ret;
 
     /* Super */
-    slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
+    slot_offset = nd->slot * NUBUS_SUPER_SLOT_SIZE;
 
     name = g_strdup_printf("nubus-super-slot-%x", nd->slot);
     memory_region_init(&nd->super_slot_mem, OBJECT(dev), name,
diff --git a/include/hw/nubus/mac-nubus-bridge.h b/include/hw/nubus/mac-nubus-bridge.h
index 36aa098dd4..650fd24eab 100644
--- a/include/hw/nubus/mac-nubus-bridge.h
+++ b/include/hw/nubus/mac-nubus-bridge.h
@@ -19,6 +19,8 @@ struct MacNubusState {
     SysBusDevice sysbus_dev;
 
     NubusBus *bus;
+    MemoryRegion super_slot_alias;
+    MemoryRegion slot_alias;
 };
 
 #endif
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 0c9f50c32e..0b9f74d4ac 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -15,13 +15,14 @@
 #include "qemu/units.h"
 
 #define NUBUS_SUPER_SLOT_SIZE 0x10000000U
-#define NUBUS_SUPER_SLOT_NB   0x9
+#define NUBUS_SUPER_SLOT_NB   0xf
 
+#define NUBUS_SLOT_BASE       (NUBUS_SUPER_SLOT_SIZE * NUBUS_SUPER_SLOT_NB)
 #define NUBUS_SLOT_SIZE       0x01000000
-#define NUBUS_SLOT_NB         0xF
+#define NUBUS_SLOT_NB         0xf
 
 #define NUBUS_FIRST_SLOT      0x0
-#define NUBUS_LAST_SLOT       0xF
+#define NUBUS_LAST_SLOT       0xf
 
 #define TYPE_NUBUS_DEVICE "nubus-device"
 OBJECT_DECLARE_SIMPLE_TYPE(NubusDevice, NUBUS_DEVICE)
@@ -34,6 +35,9 @@ OBJECT_DECLARE_SIMPLE_TYPE(NubusBus, NUBUS_BUS)
 struct NubusBus {
     BusState qbus;
 
+    AddressSpace nubus_as;
+    MemoryRegion nubus_mr;
+
     MemoryRegion super_slot_io;
     MemoryRegion slot_io;
 
-- 
2.20.1

[PATCH v4 13/20] nubus-bridge: introduce separate NubusBridge structure

[Mark Cave-Ayland]

This is to allow the Nubus bridge to store its own additional state. Also update
the comment in the file header to reflect that nubus-bridge is not specific to
the Macintosh.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/nubus/nubus-bridge.c             | 4 ++--
 include/hw/nubus/mac-nubus-bridge.h | 2 +-
 include/hw/nubus/nubus.h            | 6 ++++++
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
index cd8c6a91eb..95662568c5 100644
--- a/hw/nubus/nubus-bridge.c
+++ b/hw/nubus/nubus-bridge.c
@@ -1,5 +1,5 @@
 /*
- * QEMU Macintosh Nubus
+ * QEMU Nubus
  *
  * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
  *
@@ -22,7 +22,7 @@ static void nubus_bridge_class_init(ObjectClass *klass, void *data)
 static const TypeInfo nubus_bridge_info = {
     .name          = TYPE_NUBUS_BRIDGE,
     .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(SysBusDevice),
+    .instance_size = sizeof(NubusBridge),
     .class_init    = nubus_bridge_class_init,
 };
 
diff --git a/include/hw/nubus/mac-nubus-bridge.h b/include/hw/nubus/mac-nubus-bridge.h
index 650fd24eab..7365038966 100644
--- a/include/hw/nubus/mac-nubus-bridge.h
+++ b/include/hw/nubus/mac-nubus-bridge.h
@@ -16,7 +16,7 @@
 OBJECT_DECLARE_SIMPLE_TYPE(MacNubusState, MAC_NUBUS_BRIDGE)
 
 struct MacNubusState {
-    SysBusDevice sysbus_dev;
+    NubusBridge parent_obj;
 
     NubusBus *bus;
     MemoryRegion super_slot_alias;
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 0b9f74d4ac..bb2e70e1d1 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -10,6 +10,7 @@
 #define HW_NUBUS_NUBUS_H
 
 #include "hw/qdev-properties.h"
+#include "hw/sysbus.h"
 #include "exec/address-spaces.h"
 #include "qom/object.h"
 #include "qemu/units.h"
@@ -31,6 +32,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(NubusDevice, NUBUS_DEVICE)
 OBJECT_DECLARE_SIMPLE_TYPE(NubusBus, NUBUS_BUS)
 
 #define TYPE_NUBUS_BRIDGE "nubus-bridge"
+OBJECT_DECLARE_SIMPLE_TYPE(NubusBridge, NUBUS_BRIDGE);
 
 struct NubusBus {
     BusState qbus;
@@ -57,4 +59,8 @@ struct NubusDevice {
     MemoryRegion decl_rom;
 };
 
+struct NubusBridge {
+    SysBusDevice parent_obj;
+};
+
 #endif
-- 
2.20.1

[PATCH v4 14/20] mac-nubus-bridge: rename MacNubusState to MacNubusBridge

[Mark Cave-Ayland]

This better reflects that the mac-nubus-bridge device is derived from the
nubus-bridge device, and that the structure represents the state of the bridge
device and not the Nubus itself. Also update the comment in the file header to
reflect that mac-nubus-bridge is specific to the Macintosh.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/nubus/mac-nubus-bridge.c         | 8 +++++---
 include/hw/nubus/mac-nubus-bridge.h | 4 ++--
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
index 574bc7831e..76ea403f80 100644
--- a/hw/nubus/mac-nubus-bridge.c
+++ b/hw/nubus/mac-nubus-bridge.c
@@ -1,5 +1,7 @@
 /*
- *  Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
+ * QEMU Macintosh Nubus
+ *
+ * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
@@ -13,7 +15,7 @@
 
 static void mac_nubus_bridge_init(Object *obj)
 {
-    MacNubusState *s = MAC_NUBUS_BRIDGE(obj);
+    MacNubusBridge *s = MAC_NUBUS_BRIDGE(obj);
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 
     s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
@@ -47,7 +49,7 @@ static const TypeInfo mac_nubus_bridge_info = {
     .name          = TYPE_MAC_NUBUS_BRIDGE,
     .parent        = TYPE_NUBUS_BRIDGE,
     .instance_init = mac_nubus_bridge_init,
-    .instance_size = sizeof(MacNubusState),
+    .instance_size = sizeof(MacNubusBridge),
     .class_init    = mac_nubus_bridge_class_init,
 };
 
diff --git a/include/hw/nubus/mac-nubus-bridge.h b/include/hw/nubus/mac-nubus-bridge.h
index 7365038966..d9bb11db31 100644
--- a/include/hw/nubus/mac-nubus-bridge.h
+++ b/include/hw/nubus/mac-nubus-bridge.h
@@ -13,9 +13,9 @@
 #include "qom/object.h"
 
 #define TYPE_MAC_NUBUS_BRIDGE "mac-nubus-bridge"
-OBJECT_DECLARE_SIMPLE_TYPE(MacNubusState, MAC_NUBUS_BRIDGE)
+OBJECT_DECLARE_SIMPLE_TYPE(MacNubusBridge, MAC_NUBUS_BRIDGE)
 
-struct MacNubusState {
+struct MacNubusBridge {
     NubusBridge parent_obj;
 
     NubusBus *bus;
-- 
2.20.1

[PATCH v4 15/20] nubus: move NubusBus from mac-nubus-bridge to nubus-bridge

[Mark Cave-Ayland]

Now that Nubus has its own address space rather than mapping directly into the
system bus, move the Nubus reference from MacNubusBridge to NubusBridge.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/m68k/q800.c                      | 2 +-
 hw/nubus/mac-nubus-bridge.c         | 9 ++++-----
 hw/nubus/nubus-bridge.c             | 9 +++++++++
 include/hw/nubus/mac-nubus-bridge.h | 1 -
 include/hw/nubus/nubus.h            | 2 ++
 5 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index 0a0051a296..46befe0898 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -397,7 +397,7 @@ static void q800_init(MachineState *machine)
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
                                             9 * NUBUS_SLOT_SIZE);
 
-    nubus = MAC_NUBUS_BRIDGE(dev)->bus;
+    nubus = NUBUS_BRIDGE(dev)->bus;
 
     /* framebuffer in nubus slot #9 */
 
diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
index 76ea403f80..4854e7e546 100644
--- a/hw/nubus/mac-nubus-bridge.c
+++ b/hw/nubus/mac-nubus-bridge.c
@@ -16,21 +16,20 @@
 static void mac_nubus_bridge_init(Object *obj)
 {
     MacNubusBridge *s = MAC_NUBUS_BRIDGE(obj);
+    NubusBridge *nb = NUBUS_BRIDGE(obj);
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 
-    s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
-
     /* Macintosh only has slots 0x9 to 0xe available */
-    s->bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);
+    nb->bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);
 
     /* Aliases for slots 0x9 to 0xe */
     memory_region_init_alias(&s->super_slot_alias, obj, "super-slot-alias",
-                             &s->bus->nubus_mr,
+                             &nb->bus->nubus_mr,
                              9 * NUBUS_SUPER_SLOT_SIZE,
                              6 * NUBUS_SUPER_SLOT_SIZE);
 
     memory_region_init_alias(&s->slot_alias, obj, "slot-alias",
-                             &s->bus->nubus_mr,
+                             &nb->bus->nubus_mr,
                              NUBUS_SLOT_BASE + 9 * NUBUS_SLOT_SIZE,
                              6 * NUBUS_SLOT_SIZE);
 
diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
index 95662568c5..3b68d4435c 100644
--- a/hw/nubus/nubus-bridge.c
+++ b/hw/nubus/nubus-bridge.c
@@ -12,6 +12,14 @@
 #include "hw/sysbus.h"
 #include "hw/nubus/nubus.h"
 
+
+static void nubus_bridge_init(Object *obj)
+{
+    NubusBridge *s = NUBUS_BRIDGE(obj);
+
+    s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
+}
+
 static void nubus_bridge_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -22,6 +30,7 @@ static void nubus_bridge_class_init(ObjectClass *klass, void *data)
 static const TypeInfo nubus_bridge_info = {
     .name          = TYPE_NUBUS_BRIDGE,
     .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_init = nubus_bridge_init,
     .instance_size = sizeof(NubusBridge),
     .class_init    = nubus_bridge_class_init,
 };
diff --git a/include/hw/nubus/mac-nubus-bridge.h b/include/hw/nubus/mac-nubus-bridge.h
index d9bb11db31..45ec610d52 100644
--- a/include/hw/nubus/mac-nubus-bridge.h
+++ b/include/hw/nubus/mac-nubus-bridge.h
@@ -18,7 +18,6 @@ OBJECT_DECLARE_SIMPLE_TYPE(MacNubusBridge, MAC_NUBUS_BRIDGE)
 struct MacNubusBridge {
     NubusBridge parent_obj;
 
-    NubusBus *bus;
     MemoryRegion super_slot_alias;
     MemoryRegion slot_alias;
 };
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index bb2e70e1d1..2c83e7f7b8 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -61,6 +61,8 @@ struct NubusDevice {
 
 struct NubusBridge {
     SysBusDevice parent_obj;
+
+    NubusBus *bus;
 };
 
 #endif
-- 
2.20.1

[PATCH v4 16/20] nubus-bridge: embed the NubusBus object directly within nubus-bridge

[Mark Cave-Ayland]

Since nubus-bridge is a container for NubusBus then it should be embedded
directly within the bridge device using qbus_create_inplace().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/m68k/q800.c              | 2 +-
 hw/nubus/mac-nubus-bridge.c | 7 ++++---
 hw/nubus/nubus-bridge.c     | 3 ++-
 include/hw/nubus/nubus.h    | 2 +-
 4 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index 46befe0898..e34df1a829 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -397,7 +397,7 @@ static void q800_init(MachineState *machine)
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
                                             9 * NUBUS_SLOT_SIZE);
 
-    nubus = NUBUS_BRIDGE(dev)->bus;
+    nubus = &NUBUS_BRIDGE(dev)->bus;
 
     /* framebuffer in nubus slot #9 */
 
diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
index 4854e7e546..f764b2f562 100644
--- a/hw/nubus/mac-nubus-bridge.c
+++ b/hw/nubus/mac-nubus-bridge.c
@@ -18,18 +18,19 @@ static void mac_nubus_bridge_init(Object *obj)
     MacNubusBridge *s = MAC_NUBUS_BRIDGE(obj);
     NubusBridge *nb = NUBUS_BRIDGE(obj);
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    NubusBus *bus = &nb->bus;
 
     /* Macintosh only has slots 0x9 to 0xe available */
-    nb->bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);
+    bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);
 
     /* Aliases for slots 0x9 to 0xe */
     memory_region_init_alias(&s->super_slot_alias, obj, "super-slot-alias",
-                             &nb->bus->nubus_mr,
+                             &bus->nubus_mr,
                              9 * NUBUS_SUPER_SLOT_SIZE,
                              6 * NUBUS_SUPER_SLOT_SIZE);
 
     memory_region_init_alias(&s->slot_alias, obj, "slot-alias",
-                             &nb->bus->nubus_mr,
+                             &bus->nubus_mr,
                              NUBUS_SLOT_BASE + 9 * NUBUS_SLOT_SIZE,
                              6 * NUBUS_SLOT_SIZE);
 
diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
index 3b68d4435c..1adda7f5a6 100644
--- a/hw/nubus/nubus-bridge.c
+++ b/hw/nubus/nubus-bridge.c
@@ -16,8 +16,9 @@
 static void nubus_bridge_init(Object *obj)
 {
     NubusBridge *s = NUBUS_BRIDGE(obj);
+    NubusBus *bus = &s->bus;
 
-    s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
+    qbus_create_inplace(bus, sizeof(s->bus), TYPE_NUBUS_BUS, DEVICE(s), NULL);
 }
 
 static void nubus_bridge_class_init(ObjectClass *klass, void *data)
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index 2c83e7f7b8..cf9a585a91 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -62,7 +62,7 @@ struct NubusDevice {
 struct NubusBridge {
     SysBusDevice parent_obj;
 
-    NubusBus *bus;
+    NubusBus bus;
 };
 
 #endif
-- 
2.20.1

[PATCH v4 17/20] nubus-bridge: make slot_available_mask a qdev property

[Mark Cave-Ayland]

This is to allow Macintosh machines to further specify which slots are available
since the number of addressable slots may not match the number of physical slots
present in the machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nubus/nubus-bridge.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
index 1adda7f5a6..2c7c4ee121 100644
--- a/hw/nubus/nubus-bridge.c
+++ b/hw/nubus/nubus-bridge.c
@@ -21,11 +21,18 @@ static void nubus_bridge_init(Object *obj)
     qbus_create_inplace(bus, sizeof(s->bus), TYPE_NUBUS_BUS, DEVICE(s), NULL);
 }
 
+static Property nubus_bridge_properties[] = {
+    DEFINE_PROP_UINT32("slot-available-mask", NubusBridge,
+                       bus.slot_available_mask, 0xffff),
+    DEFINE_PROP_END_OF_LIST()
+};
+
 static void nubus_bridge_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
 
     dc->fw_name = "nubus";
+    device_class_set_props(dc, nubus_bridge_properties);
 }
 
 static const TypeInfo nubus_bridge_info = {
-- 
2.20.1

[PATCH v4 18/20] nubus: add support for slot IRQs

[Mark Cave-Ayland]

Each Nubus slot has an IRQ line that can be used to request service from the
CPU. Connect the IRQs to the Nubus bridge so that they can be wired up using qdev
gpios accordingly, and introduce a new nubus_set_irq() function that can be used
by Nubus devices to control the slot IRQ.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/nubus/nubus-bridge.c  | 2 ++
 hw/nubus/nubus-device.c  | 8 ++++++++
 include/hw/nubus/nubus.h | 6 ++++++
 3 files changed, 16 insertions(+)

diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
index 2c7c4ee121..0366d925a9 100644
--- a/hw/nubus/nubus-bridge.c
+++ b/hw/nubus/nubus-bridge.c
@@ -19,6 +19,8 @@ static void nubus_bridge_init(Object *obj)
     NubusBus *bus = &s->bus;
 
     qbus_create_inplace(bus, sizeof(s->bus), TYPE_NUBUS_BUS, DEVICE(s), NULL);
+
+    qdev_init_gpio_out(DEVICE(s), bus->irqs, NUBUS_IRQS);
 }
 
 static Property nubus_bridge_properties[] = {
diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
index 9cecb487a1..4856e81991 100644
--- a/hw/nubus/nubus-device.c
+++ b/hw/nubus/nubus-device.c
@@ -10,12 +10,20 @@
 
 #include "qemu/osdep.h"
 #include "qemu/datadir.h"
+#include "hw/irq.h"
 #include "hw/loader.h"
 #include "hw/nubus/nubus.h"
 #include "qapi/error.h"
 #include "qemu/error-report.h"
 
 
+void nubus_set_irq(NubusDevice *nd, int level)
+{
+    NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(DEVICE(nd)));
+
+    qemu_set_irq(nubus->irqs[nd->slot], level);
+}
+
 static void nubus_device_realize(DeviceState *dev, Error **errp)
 {
     NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(dev));
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
index cf9a585a91..1c487f74ac 100644
--- a/include/hw/nubus/nubus.h
+++ b/include/hw/nubus/nubus.h
@@ -25,6 +25,8 @@
 #define NUBUS_FIRST_SLOT      0x0
 #define NUBUS_LAST_SLOT       0xf
 
+#define NUBUS_IRQS            16
+
 #define TYPE_NUBUS_DEVICE "nubus-device"
 OBJECT_DECLARE_SIMPLE_TYPE(NubusDevice, NUBUS_DEVICE)
 
@@ -44,6 +46,8 @@ struct NubusBus {
     MemoryRegion slot_io;
 
     uint32_t slot_available_mask;
+
+    qemu_irq irqs[NUBUS_IRQS];
 };
 
 #define NUBUS_DECL_ROM_MAX_SIZE    (128 * KiB)
@@ -59,6 +63,8 @@ struct NubusDevice {
     MemoryRegion decl_rom;
 };
 
+void nubus_set_irq(NubusDevice *nd, int level);
+
 struct NubusBridge {
     SysBusDevice parent_obj;
 
-- 
2.20.1

[PATCH v4 19/20] q800: wire up nubus IRQs

[Mark Cave-Ayland]

Nubus IRQs are routed to the CPU through the VIA2 device so wire up the IRQs
using gpios accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/m68k/q800.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index e34df1a829..fbc45a301f 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -396,6 +396,11 @@ static void q800_init(MachineState *machine)
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 9 * NUBUS_SUPER_SLOT_SIZE);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
                                             9 * NUBUS_SLOT_SIZE);
+    for (i = 0; i < VIA2_NUBUS_IRQ_NB; i++) {
+        qdev_connect_gpio_out(dev, 9 + i,
+                              qdev_get_gpio_in_named(via2_dev, "nubus-irq",
+                                                     VIA2_NUBUS_IRQ_9 + i));
+    }
 
     nubus = &NUBUS_BRIDGE(dev)->bus;
 
-- 
2.20.1

[PATCH v4 20/20] q800: configure nubus available slots for Quadra 800

[Mark Cave-Ayland]

Slot 0x9 is reserved for use by the in-built framebuffer whilst only slots
0xc, 0xd and 0xe physically exist on the Quadra 800.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/m68k/q800.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index fbc45a301f..63f42764eb 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -78,6 +78,13 @@
 
 #define MAC_CLOCK  3686418
 
+/*
+ * Slot 0x9 is reserved for use by the in-built framebuffer whilst only
+ * slots 0xc, 0xd and 0xe physically exist on the Quadra 800
+ */
+#define Q800_NUBUS_SLOTS_AVAILABLE    (BIT(0x9) | BIT(0xc) | BIT(0xd) | \
+                                       BIT(0xe))
+
 /*
  * The GLUE (General Logic Unit) is an Apple custom integrated circuit chip
  * that performs a variety of functions (RAM management, clock generation, ...).
@@ -392,6 +399,8 @@ static void q800_init(MachineState *machine)
     /* NuBus */
 
     dev = qdev_new(TYPE_MAC_NUBUS_BRIDGE);
+    qdev_prop_set_uint32(dev, "slot-available-mask",
+                         Q800_NUBUS_SLOTS_AVAILABLE);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 9 * NUBUS_SUPER_SLOT_SIZE);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
-- 
2.20.1

Re: [PATCH v4 01/20] nubus-device: rename slot_nb variable to slot

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> This is in preparation for creating a qdev property of the same name.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  hw/nubus/nubus-device.c  | 14 +++++++-------
>  include/hw/nubus/nubus.h |  2 +-
>  2 files changed, 8 insertions(+), 8 deletions(-)
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 03/20] nubus-device: add device slot parameter

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> This prepares for allowing Nubus devices to be placed in a specific slot instead
> of always being auto-allocated by the bus itself.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nubus/nubus-device.c  | 6 ++++++
>  include/hw/nubus/nubus.h | 2 +-
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
> index 36203848e5..c1832f73da 100644
> --- a/hw/nubus/nubus-device.c
> +++ b/hw/nubus/nubus-device.c
> @@ -191,12 +191,18 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>      nubus_register_format_block(nd);
>  }
>  
> +static Property nubus_device_properties[] = {
> +    DEFINE_PROP_INT32("slot", NubusDevice, slot, -1),
> +    DEFINE_PROP_END_OF_LIST()
> +};
> +
>  static void nubus_device_class_init(ObjectClass *oc, void *data)
>  {
>      DeviceClass *dc = DEVICE_CLASS(oc);
>  
>      dc->realize = nubus_device_realize;
>      dc->bus_type = TYPE_NUBUS_BUS;
> +    device_class_set_props(dc, nubus_device_properties);
>  }
>  
>  static const TypeInfo nubus_device_type_info = {
> diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
> index 89b0976aaa..357f621d15 100644
> --- a/include/hw/nubus/nubus.h
> +++ b/include/hw/nubus/nubus.h
> @@ -42,7 +42,7 @@ struct NubusBus {
>  struct NubusDevice {
>      DeviceState qdev;
>  
> -    int slot;
> +    int32_t slot;
>      MemoryRegion super_slot_mem;
>      MemoryRegion slot_mem;
>  
> 

I think this patch should be merged with the following one because slot is simply ignored for the
moment as it is overwritten in nubus_device_realize().

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 04/20] nubus: use bitmap to manage available slots

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Convert nubus_device_realize() to use a bitmap to manage available slots to allow
> for future Nubus devices to be plugged into arbitrary slots from the command line.
> 
> Update mac_nubus_bridge_init() to only allow slots 0x9 to 0xe on a Macintosh
> machines as documented in "Desigining Cards and Drivers for the Macintosh Family".

Perhaps we can also add "NuBus Specification" for the non mac-nubus part?

http://www.bitsavers.org/pdf/ti/nubus/2242825-0001_NuBus_Spec1983.pdf

> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nubus/mac-nubus-bridge.c |  3 +++
>  hw/nubus/nubus-bus.c        |  2 +-
>  hw/nubus/nubus-device.c     | 29 +++++++++++++++++++++++++----
>  include/hw/nubus/nubus.h    |  4 ++--
>  4 files changed, 31 insertions(+), 7 deletions(-)
> 
> diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
> index 7c329300b8..c1d77e2bc7 100644
> --- a/hw/nubus/mac-nubus-bridge.c
> +++ b/hw/nubus/mac-nubus-bridge.c
> @@ -18,6 +18,9 @@ static void mac_nubus_bridge_init(Object *obj)
>  
>      s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
>  
> +    /* Macintosh only has slots 0x9 to 0xe available */
> +    s->bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);

Perhaps we can introduce MAC_NUBUS_FIRST_SLOT and MAC_NUBUS_LAST_SLOT

#define MAC_NUBUS_FIRST_SLOT 0x9
#define MAC_NUBUS_LAST_SLOT  0xe

MAKE_64BIT_MASK(MAC_NUBUS_FIRST_SLOT, MAC_NUBUS_LAST_SLOT - MAC_NUBUS_FIRST_SLOT + 1)

> +
>      sysbus_init_mmio(sbd, &s->bus->super_slot_io);
>      sysbus_init_mmio(sbd, &s->bus->slot_io);
>  }
> diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
> index 5c13452308..404c1032e0 100644
> --- a/hw/nubus/nubus-bus.c
> +++ b/hw/nubus/nubus-bus.c
> @@ -84,7 +84,7 @@ static void nubus_init(Object *obj)
>                            nubus, "nubus-slots",
>                            NUBUS_SLOT_NB * NUBUS_SLOT_SIZE);
>  
> -    nubus->current_slot = NUBUS_FIRST_SLOT;
> +    nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);

MAKE_64BIT_MASK(NUBUS_FIRST_SLOT, NUBUS_LAST_SLOT - NUBUS_FIRST_SLOT + 1) ?

And we define 16 slots, but NUBUS_SLOT_NB (above) is 15. (I think it's the value for Mac as last
slot is 0xe)

>  }
>  
>  static void nubus_class_init(ObjectClass *oc, void *data)
> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
> index c1832f73da..d91a1e4af3 100644
> --- a/hw/nubus/nubus-device.c
> +++ b/hw/nubus/nubus-device.c
> @@ -160,14 +160,35 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>      NubusDevice *nd = NUBUS_DEVICE(dev);
>      char *name;
>      hwaddr slot_offset;
> +    uint16_t s;
> +
> +    if (nd->slot == -1) {
> +        /* No slot specified, find first available free slot */
> +        s = ctz32(nubus->slot_available_mask);
> +        if (s != 32) {
> +            nd->slot = s;
> +        } else {
> +            error_setg(errp, "Cannot register nubus card, no free slot "
> +                             "available");
> +            return;
> +        }
> +    } else {
> +        /* Slot specified, make sure the slot is available */
> +        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
> +            error_setg(errp, "Cannot register nubus card, slot %d is "
> +                             "unavailable or already occupied", nd->slot);
> +            return;
> +        }
> +    }
>  
> -    if (nubus->current_slot < NUBUS_FIRST_SLOT ||
> -            nubus->current_slot > NUBUS_LAST_SLOT) {
> -        error_setg(errp, "Cannot register nubus card, not enough slots");
> +    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
> +        error_setg(errp, "Cannot register nubus card, slot must be "
> +                         "between %d and %d", NUBUS_FIRST_SLOT,
> +                         NUBUS_LAST_SLOT);

Do we need this checking as we already checked the slot bit is available?
Moreover it would be more accurate to rely on the bitmap as the first available slot differs between
nubus and mac-nubus.


>          return;
>      }
>  
> -    nd->slot = nubus->current_slot++;
> +    nubus->slot_available_mask &= ~BIT(nd->slot);
>  
>      /* Super */
>      slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
> diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
> index 357f621d15..8ff4736259 100644
> --- a/include/hw/nubus/nubus.h
> +++ b/include/hw/nubus/nubus.h
> @@ -19,7 +19,7 @@
>  #define NUBUS_SLOT_SIZE       0x01000000
>  #define NUBUS_SLOT_NB         0xF
>  
> -#define NUBUS_FIRST_SLOT      0x9
> +#define NUBUS_FIRST_SLOT      0x0
>  #define NUBUS_LAST_SLOT       0xF
>  
>  #define TYPE_NUBUS_DEVICE "nubus-device"
> @@ -36,7 +36,7 @@ struct NubusBus {
>      MemoryRegion super_slot_io;
>      MemoryRegion slot_io;
>  
> -    int current_slot;
> +    uint32_t slot_available_mask;
>  };
>  
>  struct NubusDevice {
> 

Re: [PATCH v4 02/20] nubus-device: expose separate super slot memory region

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> According to "Designing Cards and Drivers for the Macintosh Family" each physical
> nubus slot can access 2 separate address ranges: a super slot memory region which
> is 256MB and a standard slot memory region which is 16MB.
> 
> Currently a Nubus device uses the physical slot number to determine whether it is
> using a standard slot memory region or a super slot memory region rather than
> exposing both memory regions for use as required.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  hw/nubus/nubus-device.c  | 36 ++++++++++++++++++------------------
>  include/hw/nubus/nubus.h |  1 +
>  2 files changed, 19 insertions(+), 18 deletions(-)
> 
> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
> index be01269563..36203848e5 100644
> --- a/hw/nubus/nubus-device.c
> +++ b/hw/nubus/nubus-device.c
> @@ -168,26 +168,26 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>      }
>  
>      nd->slot = nubus->current_slot++;
> -    name = g_strdup_printf("nubus-slot-%d", nd->slot);
> -
> -    if (nd->slot < NUBUS_FIRST_SLOT) {
> -        /* Super */
> -        slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
> -
> -        memory_region_init(&nd->slot_mem, OBJECT(dev), name,
> -                           NUBUS_SUPER_SLOT_SIZE);
> -        memory_region_add_subregion(&nubus->super_slot_io, slot_offset,
> -                                    &nd->slot_mem);
> -    } else {
> -        /* Normal */
> -        slot_offset = nd->slot * NUBUS_SLOT_SIZE;
> -
> -        memory_region_init(&nd->slot_mem, OBJECT(dev), name, NUBUS_SLOT_SIZE);
> -        memory_region_add_subregion(&nubus->slot_io, slot_offset,
> -                                    &nd->slot_mem);
> -    }
>  
> +    /* Super */
> +    slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
> +

Is it possible to remove this patch?

The "(nd->slot - 6)" looks weird and it is removed in patch 20.

If not:

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Thanks,
Laurent

Re: [PATCH v4 05/20] nubus: move slot bitmap checks from NubusDevice realize() to BusClass check_address()

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Allow Nubus to manage the slot allocations itself using the BusClass check_address()
> virtual function rather than managing this during NubusDevice realize().
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nubus/nubus-bus.c    | 37 +++++++++++++++++++++++++++++++++++++
>  hw/nubus/nubus-device.c | 29 -----------------------------
>  2 files changed, 37 insertions(+), 29 deletions(-)
> 
> diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
> index 404c1032e0..141876b579 100644
> --- a/hw/nubus/nubus-bus.c
> +++ b/hw/nubus/nubus-bus.c
> @@ -87,11 +87,48 @@ static void nubus_init(Object *obj)
>      nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
>  }
>  
> +static bool nubus_check_address(BusState *bus, DeviceState *dev, Error **errp)
> +{
> +    NubusDevice *nd = NUBUS_DEVICE(dev);
> +    NubusBus *nubus = NUBUS_BUS(bus);
> +    uint16_t s;
> +
> +    if (nd->slot == -1) {
> +        /* No slot specified, find first available free slot */
> +        s = ctz32(nubus->slot_available_mask);
> +        if (s != 32) {
> +            nd->slot = s;
> +        } else {
> +            error_setg(errp, "Cannot register nubus card, no free slot "
> +                             "available");
> +            return false;
> +        }
> +    } else {
> +        /* Slot specified, make sure the slot is available */
> +        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
> +            error_setg(errp, "Cannot register nubus card, slot %d is "
> +                             "unavailable or already occupied", nd->slot);
> +            return false;
> +        }
> +    }
> +
> +    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
> +        error_setg(errp, "Cannot register nubus card, slot must be "
> +                         "between %d and %d", NUBUS_FIRST_SLOT,
> +                         NUBUS_LAST_SLOT);
> +        return false;
> +    }
> +
> +    nubus->slot_available_mask &= ~BIT(nd->slot);
> +    return true;
> +}
> +
>  static void nubus_class_init(ObjectClass *oc, void *data)
>  {
>      BusClass *bc = BUS_CLASS(oc);
>  
>      bc->realize = nubus_realize;
> +    bc->check_address = nubus_check_address;
>  }
>  
>  static const TypeInfo nubus_bus_info = {
> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
> index d91a1e4af3..7a32c8c95b 100644
> --- a/hw/nubus/nubus-device.c
> +++ b/hw/nubus/nubus-device.c
> @@ -160,35 +160,6 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>      NubusDevice *nd = NUBUS_DEVICE(dev);
>      char *name;
>      hwaddr slot_offset;
> -    uint16_t s;
> -
> -    if (nd->slot == -1) {
> -        /* No slot specified, find first available free slot */
> -        s = ctz32(nubus->slot_available_mask);
> -        if (s != 32) {
> -            nd->slot = s;
> -        } else {
> -            error_setg(errp, "Cannot register nubus card, no free slot "
> -                             "available");
> -            return;
> -        }
> -    } else {
> -        /* Slot specified, make sure the slot is available */
> -        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
> -            error_setg(errp, "Cannot register nubus card, slot %d is "
> -                             "unavailable or already occupied", nd->slot);
> -            return;
> -        }
> -    }
> -
> -    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
> -        error_setg(errp, "Cannot register nubus card, slot must be "
> -                         "between %d and %d", NUBUS_FIRST_SLOT,
> -                         NUBUS_LAST_SLOT);
> -        return;
> -    }
> -
> -    nubus->slot_available_mask &= ~BIT(nd->slot);
>  
>      /* Super */
>      slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
> 

For the code move (but I think it needs some update in patch 4):

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 06/20] nubus: implement BusClass get_dev_path()

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  hw/nubus/nubus-bus.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
> index 141876b579..63e7d66b95 100644
> --- a/hw/nubus/nubus-bus.c
> +++ b/hw/nubus/nubus-bus.c
> @@ -87,6 +87,21 @@ static void nubus_init(Object *obj)
>      nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
>  }
>  
> +static char *nubus_get_dev_path(DeviceState *dev)
> +{
> +    NubusDevice *nd = NUBUS_DEVICE(dev);
> +    BusState *bus = qdev_get_parent_bus(dev);
> +    char *p = qdev_get_dev_path(bus->parent);
> +
> +    if (p) {
> +        char *ret = g_strdup_printf("%s/%s/%02x", p, bus->name, nd->slot);
> +        g_free(p);
> +        return ret;
> +    } else {
> +        return g_strdup_printf("%s/%02x", bus->name, nd->slot);
> +    }
> +}
> +
>  static bool nubus_check_address(BusState *bus, DeviceState *dev, Error **errp)
>  {
>      NubusDevice *nd = NUBUS_DEVICE(dev);
> @@ -129,6 +144,7 @@ static void nubus_class_init(ObjectClass *oc, void *data)
>  
>      bc->realize = nubus_realize;
>      bc->check_address = nubus_check_address;
> +    bc->get_dev_path = nubus_get_dev_path;
>  }
>  
>  static const TypeInfo nubus_bus_info = {
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 07/20] nubus: add trace-events for empty slot accesses

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Increase the max_access_size to 4 bytes for empty Nubus slot and super slot
> accesses to allow tracing of the Nubus enumeration process by the guest OS.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  hw/nubus/nubus-bus.c  | 10 +++++++---
>  hw/nubus/trace-events |  7 +++++++
>  hw/nubus/trace.h      |  1 +
>  meson.build           |  1 +
>  4 files changed, 16 insertions(+), 3 deletions(-)
>  create mode 100644 hw/nubus/trace-events
>  create mode 100644 hw/nubus/trace.h
> 
> diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
> index 63e7d66b95..39182db065 100644
> --- a/hw/nubus/nubus-bus.c
> +++ b/hw/nubus/nubus-bus.c
> @@ -11,6 +11,7 @@
>  #include "qemu/osdep.h"
>  #include "hw/nubus/nubus.h"
>  #include "qapi/error.h"
> +#include "trace.h"
>  
>  
>  static NubusBus *nubus_find(void)
> @@ -23,12 +24,13 @@ static void nubus_slot_write(void *opaque, hwaddr addr, uint64_t val,
>                               unsigned int size)
>  {
>      /* read only */
> +    trace_nubus_slot_write(addr, val, size);
>  }
>  
> -
>  static uint64_t nubus_slot_read(void *opaque, hwaddr addr,
>                                  unsigned int size)
>  {
> +    trace_nubus_slot_read(addr, size);
>      return 0;
>  }
>  
> @@ -38,7 +40,7 @@ static const MemoryRegionOps nubus_slot_ops = {
>      .endianness = DEVICE_BIG_ENDIAN,
>      .valid = {
>          .min_access_size = 1,
> -        .max_access_size = 1,
> +        .max_access_size = 4,
>      },
>  };
>  
> @@ -46,11 +48,13 @@ static void nubus_super_slot_write(void *opaque, hwaddr addr, uint64_t val,
>                                     unsigned int size)
>  {
>      /* read only */
> +    trace_nubus_super_slot_write(addr, val, size);
>  }
>  
>  static uint64_t nubus_super_slot_read(void *opaque, hwaddr addr,
>                                        unsigned int size)
>  {
> +    trace_nubus_super_slot_read(addr, size);
>      return 0;
>  }
>  
> @@ -60,7 +64,7 @@ static const MemoryRegionOps nubus_super_slot_ops = {
>      .endianness = DEVICE_BIG_ENDIAN,
>      .valid = {
>          .min_access_size = 1,
> -        .max_access_size = 1,
> +        .max_access_size = 4,
>      },
>  };
>  
> diff --git a/hw/nubus/trace-events b/hw/nubus/trace-events
> new file mode 100644
> index 0000000000..e31833d694
> --- /dev/null
> +++ b/hw/nubus/trace-events
> @@ -0,0 +1,7 @@
> +# See docs/devel/tracing.txt for syntax documentation.
> +
> +# nubus-bus.c
> +nubus_slot_read(uint64_t addr, int size) "reading unassigned addr 0x%"PRIx64 " size %d"
> +nubus_slot_write(uint64_t addr, uint64_t val, int size) "writing unassigned addr 0x%"PRIx64 " value 0x%"PRIx64 " size %d"
> +nubus_super_slot_read(uint64_t addr, int size) "reading unassigned addr 0x%"PRIx64 " size %d"
> +nubus_super_slot_write(uint64_t addr, uint64_t val, int size) "writing unassigned addr 0x%"PRIx64 " value 0x%"PRIx64 " size %d"
> diff --git a/hw/nubus/trace.h b/hw/nubus/trace.h
> new file mode 100644
> index 0000000000..3749420da1
> --- /dev/null
> +++ b/hw/nubus/trace.h
> @@ -0,0 +1 @@
> +#include "trace/trace-hw_nubus.h"
> diff --git a/meson.build b/meson.build
> index 2711cbb789..612ce671b5 100644
> --- a/meson.build
> +++ b/meson.build
> @@ -2135,6 +2135,7 @@ if have_system
>      'hw/misc/macio',
>      'hw/net',
>      'hw/net/can',
> +    'hw/nubus',
>      'hw/nvme',
>      'hw/nvram',
>      'hw/pci',
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 08/20] nubus: generate bus error when attempting to access empty slots

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> According to "Designing Cards and Drivers for the Macintosh Family" any attempt
> to access an unimplemented address location on Nubus generates a bus error. MacOS
> uses a custom bus error handler to detect empty Nubus slots, and with the current
> implementation assumes that all slots are occupied as the Nubus transactions
> never fail.
> 
> Switch nubus_slot_ops and nubus_super_slot_ops over to use {read,write}_with_attrs
> and hard-code them to return MEMTX_DECODE_ERROR so that unoccupied Nubus slots
> will generate the expected bus error.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  hw/nubus/nubus-bus.c | 34 ++++++++++++++++++----------------
>  1 file changed, 18 insertions(+), 16 deletions(-)
> 
> diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
> index 39182db065..a617459a4f 100644
> --- a/hw/nubus/nubus-bus.c
> +++ b/hw/nubus/nubus-bus.c
> @@ -20,23 +20,23 @@ static NubusBus *nubus_find(void)
>      return NUBUS_BUS(object_resolve_path_type("", TYPE_NUBUS_BUS, NULL));
>  }
>  
> -static void nubus_slot_write(void *opaque, hwaddr addr, uint64_t val,
> -                             unsigned int size)
> +static MemTxResult nubus_slot_write(void *opaque, hwaddr addr, uint64_t val,
> +                                    unsigned size, MemTxAttrs attrs)
>  {
> -    /* read only */
>      trace_nubus_slot_write(addr, val, size);
> +    return MEMTX_DECODE_ERROR;
>  }
>  
> -static uint64_t nubus_slot_read(void *opaque, hwaddr addr,
> -                                unsigned int size)
> +static MemTxResult nubus_slot_read(void *opaque, hwaddr addr, uint64_t *data,
> +                                   unsigned size, MemTxAttrs attrs)
>  {
>      trace_nubus_slot_read(addr, size);
> -    return 0;
> +    return MEMTX_DECODE_ERROR;
>  }
>  
>  static const MemoryRegionOps nubus_slot_ops = {
> -    .read  = nubus_slot_read,
> -    .write = nubus_slot_write,
> +    .read_with_attrs  = nubus_slot_read,
> +    .write_with_attrs = nubus_slot_write,
>      .endianness = DEVICE_BIG_ENDIAN,
>      .valid = {
>          .min_access_size = 1,
> @@ -44,23 +44,25 @@ static const MemoryRegionOps nubus_slot_ops = {
>      },
>  };
>  
> -static void nubus_super_slot_write(void *opaque, hwaddr addr, uint64_t val,
> -                                   unsigned int size)
> +static MemTxResult nubus_super_slot_write(void *opaque, hwaddr addr,
> +                                          uint64_t val, unsigned size,
> +                                          MemTxAttrs attrs)
>  {
> -    /* read only */
>      trace_nubus_super_slot_write(addr, val, size);
> +    return MEMTX_DECODE_ERROR;
>  }
>  
> -static uint64_t nubus_super_slot_read(void *opaque, hwaddr addr,
> -                                      unsigned int size)
> +static MemTxResult nubus_super_slot_read(void *opaque, hwaddr addr,
> +                                         uint64_t *data, unsigned size,
> +                                         MemTxAttrs attrs)
>  {
>      trace_nubus_super_slot_read(addr, size);
> -    return 0;
> +    return MEMTX_DECODE_ERROR;
>  }
>  
>  static const MemoryRegionOps nubus_super_slot_ops = {
> -    .read  = nubus_super_slot_read,
> -    .write = nubus_super_slot_write,
> +    .read_with_attrs = nubus_super_slot_read,
> +    .write_with_attrs = nubus_super_slot_write,
>      .endianness = DEVICE_BIG_ENDIAN,
>      .valid = {
>          .min_access_size = 1,
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 09/20] macfb: don't register declaration ROM

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> The macfb device is an on-board framebuffer and so is initialised by the
> system declaration ROM included within the MacOS toolbox ROM.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/display/macfb.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/hw/display/macfb.c b/hw/display/macfb.c
> index d8183b9bbd..76808b69cc 100644
> --- a/hw/display/macfb.c
> +++ b/hw/display/macfb.c
> @@ -383,10 +383,6 @@ static void macfb_sysbus_realize(DeviceState *dev, Error **errp)
>      sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
>  }
>  
> -const uint8_t macfb_rom[] = {
> -    255, 0, 0, 0,
> -};
> -
>  static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>  {
>      NubusDevice *nd = NUBUS_DEVICE(dev);
> @@ -399,8 +395,6 @@ static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>      macfb_common_realize(dev, ms, errp);
>      memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, &ms->mem_ctrl);
>      memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, &ms->mem_vram);
> -
> -    nubus_register_rom(nd, macfb_rom, sizeof(macfb_rom), 1, 9, 0xf);
>  }
>  
>  static void macfb_sysbus_reset(DeviceState *d)
> 

Will macfb continue to work with "-kernel" and without providing any MacOS ROM?

Thanks,
Laurent

Re: [PATCH v4 17/20] nubus-bridge: make slot_available_mask a qdev property

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> This is to allow Macintosh machines to further specify which slots are available
> since the number of addressable slots may not match the number of physical slots
> present in the machine.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nubus/nubus-bridge.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
> index 1adda7f5a6..2c7c4ee121 100644
> --- a/hw/nubus/nubus-bridge.c
> +++ b/hw/nubus/nubus-bridge.c
> @@ -21,11 +21,18 @@ static void nubus_bridge_init(Object *obj)
>      qbus_create_inplace(bus, sizeof(s->bus), TYPE_NUBUS_BUS, DEVICE(s), NULL);
>  }
>  
> +static Property nubus_bridge_properties[] = {
> +    DEFINE_PROP_UINT32("slot-available-mask", NubusBridge,
> +                       bus.slot_available_mask, 0xffff),

So you can remove the "nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);" in nubus_init()?

> +    DEFINE_PROP_END_OF_LIST()
> +};
> +
>  static void nubus_bridge_class_init(ObjectClass *klass, void *data)
>  {
>      DeviceClass *dc = DEVICE_CLASS(klass);
>  
>      dc->fw_name = "nubus";
> +    device_class_set_props(dc, nubus_bridge_properties);
>  }
>  
>  static const TypeInfo nubus_bridge_info = {
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 20/20] q800: configure nubus available slots for Quadra 800

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Slot 0x9 is reserved for use by the in-built framebuffer whilst only slots
> 0xc, 0xd and 0xe physically exist on the Quadra 800.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/m68k/q800.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index fbc45a301f..63f42764eb 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -78,6 +78,13 @@
>  
>  #define MAC_CLOCK  3686418
>  
> +/*
> + * Slot 0x9 is reserved for use by the in-built framebuffer whilst only
> + * slots 0xc, 0xd and 0xe physically exist on the Quadra 800
> + */
> +#define Q800_NUBUS_SLOTS_AVAILABLE    (BIT(0x9) | BIT(0xc) | BIT(0xd) | \
> +                                       BIT(0xe))
> +
>  /*
>   * The GLUE (General Logic Unit) is an Apple custom integrated circuit chip
>   * that performs a variety of functions (RAM management, clock generation, ...).
> @@ -392,6 +399,8 @@ static void q800_init(MachineState *machine)
>      /* NuBus */
>  
>      dev = qdev_new(TYPE_MAC_NUBUS_BRIDGE);
> +    qdev_prop_set_uint32(dev, "slot-available-mask",
> +                         Q800_NUBUS_SLOTS_AVAILABLE);
>      sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
>      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 9 * NUBUS_SUPER_SLOT_SIZE);
>      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 18/20] nubus: add support for slot IRQs

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Each Nubus slot has an IRQ line that can be used to request service from the
> CPU. Connect the IRQs to the Nubus bridge so that they can be wired up using qdev
> gpios accordingly, and introduce a new nubus_set_irq() function that can be used
> by Nubus devices to control the slot IRQ.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nubus/nubus-bridge.c  | 2 ++
>  hw/nubus/nubus-device.c  | 8 ++++++++
>  include/hw/nubus/nubus.h | 6 ++++++
>  3 files changed, 16 insertions(+)
> 
> diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
> index 2c7c4ee121..0366d925a9 100644
> --- a/hw/nubus/nubus-bridge.c
> +++ b/hw/nubus/nubus-bridge.c
> @@ -19,6 +19,8 @@ static void nubus_bridge_init(Object *obj)
>      NubusBus *bus = &s->bus;
>  
>      qbus_create_inplace(bus, sizeof(s->bus), TYPE_NUBUS_BUS, DEVICE(s), NULL);
> +
> +    qdev_init_gpio_out(DEVICE(s), bus->irqs, NUBUS_IRQS);
>  }
>  
>  static Property nubus_bridge_properties[] = {
> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
> index 9cecb487a1..4856e81991 100644
> --- a/hw/nubus/nubus-device.c
> +++ b/hw/nubus/nubus-device.c
> @@ -10,12 +10,20 @@
>  
>  #include "qemu/osdep.h"
>  #include "qemu/datadir.h"
> +#include "hw/irq.h"
>  #include "hw/loader.h"
>  #include "hw/nubus/nubus.h"
>  #include "qapi/error.h"
>  #include "qemu/error-report.h"
>  
>  
> +void nubus_set_irq(NubusDevice *nd, int level)
> +{
> +    NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(DEVICE(nd)));
> +
> +    qemu_set_irq(nubus->irqs[nd->slot], level);
> +}
> +
>  static void nubus_device_realize(DeviceState *dev, Error **errp)
>  {
>      NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(dev));
> diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
> index cf9a585a91..1c487f74ac 100644
> --- a/include/hw/nubus/nubus.h
> +++ b/include/hw/nubus/nubus.h
> @@ -25,6 +25,8 @@
>  #define NUBUS_FIRST_SLOT      0x0
>  #define NUBUS_LAST_SLOT       0xf
>  
> +#define NUBUS_IRQS            16
> +
>  #define TYPE_NUBUS_DEVICE "nubus-device"
>  OBJECT_DECLARE_SIMPLE_TYPE(NubusDevice, NUBUS_DEVICE)
>  
> @@ -44,6 +46,8 @@ struct NubusBus {
>      MemoryRegion slot_io;
>  
>      uint32_t slot_available_mask;
> +
> +    qemu_irq irqs[NUBUS_IRQS];
>  };
>  
>  #define NUBUS_DECL_ROM_MAX_SIZE    (128 * KiB)
> @@ -59,6 +63,8 @@ struct NubusDevice {
>      MemoryRegion decl_rom;
>  };
>  
> +void nubus_set_irq(NubusDevice *nd, int level);
> +
>  struct NubusBridge {
>      SysBusDevice parent_obj;
>  
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 19/20] q800: wire up nubus IRQs

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Nubus IRQs are routed to the CPU through the VIA2 device so wire up the IRQs
> using gpios accordingly.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/m68k/q800.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index e34df1a829..fbc45a301f 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -396,6 +396,11 @@ static void q800_init(MachineState *machine)
>      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 9 * NUBUS_SUPER_SLOT_SIZE);
>      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
>                                              9 * NUBUS_SLOT_SIZE);
> +    for (i = 0; i < VIA2_NUBUS_IRQ_NB; i++) {
> +        qdev_connect_gpio_out(dev, 9 + i,
> +                              qdev_get_gpio_in_named(via2_dev, "nubus-irq",
> +                                                     VIA2_NUBUS_IRQ_9 + i));
> +    }
>  
>      nubus = &NUBUS_BRIDGE(dev)->bus;
>  
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 09/20] macfb: don't register declaration ROM

[Laurent Vivier]

Le 20/09/2021 à 22:01, Laurent Vivier a écrit :
> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>> The macfb device is an on-board framebuffer and so is initialised by the
>> system declaration ROM included within the MacOS toolbox ROM.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> ---
>>  hw/display/macfb.c | 6 ------
>>  1 file changed, 6 deletions(-)
>>
>> diff --git a/hw/display/macfb.c b/hw/display/macfb.c
>> index d8183b9bbd..76808b69cc 100644
>> --- a/hw/display/macfb.c
>> +++ b/hw/display/macfb.c
>> @@ -383,10 +383,6 @@ static void macfb_sysbus_realize(DeviceState *dev, Error **errp)
>>      sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
>>  }
>>  
>> -const uint8_t macfb_rom[] = {
>> -    255, 0, 0, 0,
>> -};
>> -
>>  static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>>  {
>>      NubusDevice *nd = NUBUS_DEVICE(dev);
>> @@ -399,8 +395,6 @@ static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>>      macfb_common_realize(dev, ms, errp);
>>      memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, &ms->mem_ctrl);
>>      memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, &ms->mem_vram);
>> -
>> -    nubus_register_rom(nd, macfb_rom, sizeof(macfb_rom), 1, 9, 0xf);
>>  }
>>  
>>  static void macfb_sysbus_reset(DeviceState *d)
>>
> 
> Will macfb continue to work with "-kernel" and without providing any MacOS ROM?

My Quadra doesn't seem to report any ROM on boot, so it must be fine

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 10/20] nubus-device: remove nubus_register_rom() and nubus_register_format_block()

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> Since there is no need to generate a dummy declaration ROM, remove both
> nubus_register_rom() and nubus_register_format_block(). These will shortly be
> replaced with a mechanism to optionally load a declaration ROM from disk to
> allow real images to be used within QEMU.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nubus/nubus-device.c  | 143 ---------------------------------------
>  include/hw/nubus/nubus.h |  19 ------
>  2 files changed, 162 deletions(-)
> 
> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
> index 7a32c8c95b..9c1992ceb0 100644
> --- a/hw/nubus/nubus-device.c
> +++ b/hw/nubus/nubus-device.c
> @@ -13,147 +13,6 @@
>  #include "qapi/error.h"
>  
>  
> -/* The Format Block Structure */
> -
> -#define FBLOCK_DIRECTORY_OFFSET 0
> -#define FBLOCK_LENGTH           4
> -#define FBLOCK_CRC              8
> -#define FBLOCK_REVISION_LEVEL   12
> -#define FBLOCK_FORMAT           13
> -#define FBLOCK_TEST_PATTERN     14
> -#define FBLOCK_RESERVED         18
> -#define FBLOCK_BYTE_LANES       19
> -
> -#define FBLOCK_SIZE             20
> -#define FBLOCK_PATTERN_VAL      0x5a932bc7
> -
> -static uint64_t nubus_fblock_read(void *opaque, hwaddr addr, unsigned int size)
> -{
> -    NubusDevice *dev = opaque;
> -    uint64_t val;
> -
> -#define BYTE(v, b) (((v) >> (24 - 8 * (b))) & 0xff)
> -    switch (addr) {
> -    case FBLOCK_BYTE_LANES:
> -        val = dev->byte_lanes;
> -        val |= (val ^ 0xf) << 4;
> -        break;
> -    case FBLOCK_RESERVED:
> -        val = 0x00;
> -        break;
> -    case FBLOCK_TEST_PATTERN...FBLOCK_TEST_PATTERN + 3:
> -        val = BYTE(FBLOCK_PATTERN_VAL, addr - FBLOCK_TEST_PATTERN);
> -        break;
> -    case FBLOCK_FORMAT:
> -        val = dev->rom_format;
> -        break;
> -    case FBLOCK_REVISION_LEVEL:
> -        val = dev->rom_rev;
> -        break;
> -    case FBLOCK_CRC...FBLOCK_CRC + 3:
> -        val = BYTE(dev->rom_crc, addr - FBLOCK_CRC);
> -        break;
> -    case FBLOCK_LENGTH...FBLOCK_LENGTH + 3:
> -        val = BYTE(dev->rom_length, addr - FBLOCK_LENGTH);
> -        break;
> -    case FBLOCK_DIRECTORY_OFFSET...FBLOCK_DIRECTORY_OFFSET + 3:
> -        val = BYTE(dev->directory_offset, addr - FBLOCK_DIRECTORY_OFFSET);
> -        break;
> -    default:
> -        val = 0;
> -        break;
> -    }
> -    return val;
> -}
> -
> -static void nubus_fblock_write(void *opaque, hwaddr addr, uint64_t val,
> -                               unsigned int size)
> -{
> -    /* read only */
> -}
> -
> -static const MemoryRegionOps nubus_format_block_ops = {
> -    .read = nubus_fblock_read,
> -    .write = nubus_fblock_write,
> -    .endianness = DEVICE_BIG_ENDIAN,
> -    .valid = {
> -        .min_access_size = 1,
> -        .max_access_size = 1,
> -    }
> -};
> -
> -static void nubus_register_format_block(NubusDevice *dev)
> -{
> -    char *fblock_name;
> -
> -    fblock_name = g_strdup_printf("nubus-slot-%d-format-block",
> -                                  dev->slot);
> -
> -    hwaddr fblock_offset = memory_region_size(&dev->slot_mem) - FBLOCK_SIZE;
> -    memory_region_init_io(&dev->fblock_io, NULL, &nubus_format_block_ops,
> -                          dev, fblock_name, FBLOCK_SIZE);
> -    memory_region_add_subregion(&dev->slot_mem, fblock_offset,
> -                                &dev->fblock_io);
> -
> -    g_free(fblock_name);
> -}
> -
> -static void mac_nubus_rom_write(void *opaque, hwaddr addr, uint64_t val,
> -                                       unsigned int size)
> -{
> -    /* read only */
> -}
> -
> -static uint64_t mac_nubus_rom_read(void *opaque, hwaddr addr,
> -                                    unsigned int size)
> -{
> -    NubusDevice *dev = opaque;
> -
> -    return dev->rom[addr];
> -}
> -
> -static const MemoryRegionOps mac_nubus_rom_ops = {
> -    .read  = mac_nubus_rom_read,
> -    .write = mac_nubus_rom_write,
> -    .endianness = DEVICE_BIG_ENDIAN,
> -    .valid = {
> -        .min_access_size = 1,
> -        .max_access_size = 1,
> -    },
> -};
> -
> -
> -void nubus_register_rom(NubusDevice *dev, const uint8_t *rom, uint32_t size,
> -                        int revision, int format, uint8_t byte_lanes)
> -{
> -    hwaddr rom_offset;
> -    char *rom_name;
> -
> -    /* FIXME : really compute CRC */
> -    dev->rom_length = 0;
> -    dev->rom_crc = 0;
> -
> -    dev->rom_rev = revision;
> -    dev->rom_format = format;
> -
> -    dev->byte_lanes = byte_lanes;
> -    dev->directory_offset = -size;
> -
> -    /* ROM */
> -
> -    dev->rom = rom;
> -    rom_name = g_strdup_printf("nubus-slot-%d-rom", dev->slot);
> -    memory_region_init_io(&dev->rom_io, NULL, &mac_nubus_rom_ops,
> -                          dev, rom_name, size);
> -    memory_region_set_readonly(&dev->rom_io, true);
> -
> -    rom_offset = memory_region_size(&dev->slot_mem) - FBLOCK_SIZE +
> -                 dev->directory_offset;
> -    memory_region_add_subregion(&dev->slot_mem, rom_offset, &dev->rom_io);
> -
> -    g_free(rom_name);
> -}
> -
>  static void nubus_device_realize(DeviceState *dev, Error **errp)
>  {
>      NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(dev));
> @@ -179,8 +38,6 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>      memory_region_add_subregion(&nubus->slot_io, slot_offset,
>                                  &nd->slot_mem);
>      g_free(name);
> -
> -    nubus_register_format_block(nd);
>  }
>  
>  static Property nubus_device_properties[] = {
> diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
> index 8ff4736259..87a97516c7 100644
> --- a/include/hw/nubus/nubus.h
> +++ b/include/hw/nubus/nubus.h
> @@ -45,25 +45,6 @@ struct NubusDevice {
>      int32_t slot;
>      MemoryRegion super_slot_mem;
>      MemoryRegion slot_mem;
> -
> -    /* Format Block */
> -
> -    MemoryRegion fblock_io;
> -
> -    uint32_t rom_length;
> -    uint32_t rom_crc;
> -    uint8_t rom_rev;
> -    uint8_t rom_format;
> -    uint8_t byte_lanes;
> -    int32_t directory_offset;
> -
> -    /* ROM */
> -
> -    MemoryRegion rom_io;
> -    const uint8_t *rom;
>  };
>  
> -void nubus_register_rom(NubusDevice *dev, const uint8_t *rom, uint32_t size,
> -                        int revision, int format, uint8_t byte_lanes);
> -
>  #endif
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 11/20] nubus-device: add romfile property for loading declaration ROMs

[Laurent Vivier]

Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
> The declaration ROM is located at the top-most address of the standard slot
> space.
> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/nubus/nubus-device.c  | 44 +++++++++++++++++++++++++++++++++++++++-
>  include/hw/nubus/nubus.h |  6 ++++++
>  2 files changed, 49 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
> index 9c1992ceb0..3da0db4d54 100644
> --- a/hw/nubus/nubus-device.c
> +++ b/hw/nubus/nubus-device.c
> @@ -9,16 +9,21 @@
>   */
>  
>  #include "qemu/osdep.h"
> +#include "qemu/datadir.h"
> +#include "hw/loader.h"
>  #include "hw/nubus/nubus.h"
>  #include "qapi/error.h"
> +#include "qemu/error-report.h"
>  
>  
>  static void nubus_device_realize(DeviceState *dev, Error **errp)
>  {
>      NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(dev));
>      NubusDevice *nd = NUBUS_DEVICE(dev);
> -    char *name;
> +    char *name, *path;
>      hwaddr slot_offset;
> +    int64_t size;
> +    int ret;
>  
>      /* Super */
>      slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
> @@ -38,10 +43,47 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>      memory_region_add_subregion(&nubus->slot_io, slot_offset,
>                                  &nd->slot_mem);
>      g_free(name);
> +
> +    /* Declaration ROM */
> +    if (nd->romfile != NULL) {
> +        path = qemu_find_file(QEMU_FILE_TYPE_BIOS, nd->romfile);
> +        if (path == NULL) {
> +            path = g_strdup(nd->romfile);
> +        }
> +
> +        size = get_image_size(path);
> +        if (size < 0) {
> +            error_setg(errp, "failed to find romfile \"%s\"", nd->romfile);
> +            g_free(path);
> +            return;
> +        } else if (size == 0) {
> +            error_setg(errp, "romfile \"%s\" is empty", nd->romfile);
> +            g_free(path);
> +            return;
> +        } else if (size > NUBUS_DECL_ROM_MAX_SIZE) {
> +            error_setg(errp, "romfile \"%s\" too large (maximum size 128K)",
> +                       nd->romfile);
> +            g_free(path);
> +            return;
> +        }
> +
> +        name = g_strdup_printf("nubus-slot-%x-declaration-rom", nd->slot);
> +        memory_region_init_rom(&nd->decl_rom, OBJECT(dev), name, size,
> +                               &error_abort);
> +        ret = load_image_mr(path, &nd->decl_rom);
> +        g_free(path);
> +        if (ret < 0) {
> +            error_setg(errp, "could not load romfile \"%s\"", nd->romfile);
> +            return;
> +        }
> +        memory_region_add_subregion(&nd->slot_mem, NUBUS_SLOT_SIZE - size,
> +                                    &nd->decl_rom);
> +    }
>  }
>  
>  static Property nubus_device_properties[] = {
>      DEFINE_PROP_INT32("slot", NubusDevice, slot, -1),
> +    DEFINE_PROP_STRING("romfile", NubusDevice, romfile),
>      DEFINE_PROP_END_OF_LIST()
>  };
>  
> diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
> index 87a97516c7..0c9f50c32e 100644
> --- a/include/hw/nubus/nubus.h
> +++ b/include/hw/nubus/nubus.h
> @@ -12,6 +12,7 @@
>  #include "hw/qdev-properties.h"
>  #include "exec/address-spaces.h"
>  #include "qom/object.h"
> +#include "qemu/units.h"
>  
>  #define NUBUS_SUPER_SLOT_SIZE 0x10000000U
>  #define NUBUS_SUPER_SLOT_NB   0x9
> @@ -39,12 +40,17 @@ struct NubusBus {
>      uint32_t slot_available_mask;
>  };
>  
> +#define NUBUS_DECL_ROM_MAX_SIZE    (128 * KiB)
> +
>  struct NubusDevice {
>      DeviceState qdev;
>  
>      int32_t slot;
>      MemoryRegion super_slot_mem;
>      MemoryRegion slot_mem;
> +
> +    char *romfile;
> +    MemoryRegion decl_rom;
>  };
>  
>  #endif
> 

Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Re: [PATCH v4 03/20] nubus-device: add device slot parameter

[Mark Cave-Ayland]

On 20/09/2021 18:31, Laurent Vivier wrote:

> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>> This prepares for allowing Nubus devices to be placed in a specific slot instead
>> of always being auto-allocated by the bus itself.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> ---
>>   hw/nubus/nubus-device.c  | 6 ++++++
>>   include/hw/nubus/nubus.h | 2 +-
>>   2 files changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
>> index 36203848e5..c1832f73da 100644
>> --- a/hw/nubus/nubus-device.c
>> +++ b/hw/nubus/nubus-device.c
>> @@ -191,12 +191,18 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>>       nubus_register_format_block(nd);
>>   }
>>   
>> +static Property nubus_device_properties[] = {
>> +    DEFINE_PROP_INT32("slot", NubusDevice, slot, -1),
>> +    DEFINE_PROP_END_OF_LIST()
>> +};
>> +
>>   static void nubus_device_class_init(ObjectClass *oc, void *data)
>>   {
>>       DeviceClass *dc = DEVICE_CLASS(oc);
>>   
>>       dc->realize = nubus_device_realize;
>>       dc->bus_type = TYPE_NUBUS_BUS;
>> +    device_class_set_props(dc, nubus_device_properties);
>>   }
>>   
>>   static const TypeInfo nubus_device_type_info = {
>> diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
>> index 89b0976aaa..357f621d15 100644
>> --- a/include/hw/nubus/nubus.h
>> +++ b/include/hw/nubus/nubus.h
>> @@ -42,7 +42,7 @@ struct NubusBus {
>>   struct NubusDevice {
>>       DeviceState qdev;
>>   
>> -    int slot;
>> +    int32_t slot;
>>       MemoryRegion super_slot_mem;
>>       MemoryRegion slot_mem;
>>   
>>
> 
> I think this patch should be merged with the following one because slot is simply ignored for the
> moment as it is overwritten in nubus_device_realize().
> 
> Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Okay I can do that. My original thinking was to introduce the property first, then 
change the logic to make the follow-on patch easier to review but I don't mind either 
way.


ATB,

Mark.

Re: [PATCH v4 04/20] nubus: use bitmap to manage available slots

[Mark Cave-Ayland]

On 20/09/2021 20:48, Laurent Vivier wrote:

> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>> Convert nubus_device_realize() to use a bitmap to manage available slots to allow
>> for future Nubus devices to be plugged into arbitrary slots from the command line.
>>
>> Update mac_nubus_bridge_init() to only allow slots 0x9 to 0xe on a Macintosh
>> machines as documented in "Desigining Cards and Drivers for the Macintosh Family".
> 
> Perhaps we can also add "NuBus Specification" for the non mac-nubus part?
> 
> http://www.bitsavers.org/pdf/ti/nubus/2242825-0001_NuBus_Spec1983.pdf

I can add that but I'm wondering if it would be better to do this in patch 13 
("nubus-bridge: introduce separate NubusBridge structure") where the comment is 
updated to reflect the difference between Nubus and Macintosh-specific Nubus?

>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> ---
>>   hw/nubus/mac-nubus-bridge.c |  3 +++
>>   hw/nubus/nubus-bus.c        |  2 +-
>>   hw/nubus/nubus-device.c     | 29 +++++++++++++++++++++++++----
>>   include/hw/nubus/nubus.h    |  4 ++--
>>   4 files changed, 31 insertions(+), 7 deletions(-)
>>
>> diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
>> index 7c329300b8..c1d77e2bc7 100644
>> --- a/hw/nubus/mac-nubus-bridge.c
>> +++ b/hw/nubus/mac-nubus-bridge.c
>> @@ -18,6 +18,9 @@ static void mac_nubus_bridge_init(Object *obj)
>>   
>>       s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
>>   
>> +    /* Macintosh only has slots 0x9 to 0xe available */
>> +    s->bus->slot_available_mask = MAKE_64BIT_MASK(9, 6);
> 
> Perhaps we can introduce MAC_NUBUS_FIRST_SLOT and MAC_NUBUS_LAST_SLOT
> 
> #define MAC_NUBUS_FIRST_SLOT 0x9
> #define MAC_NUBUS_LAST_SLOT  0xe
> 
> MAKE_64BIT_MASK(MAC_NUBUS_FIRST_SLOT, MAC_NUBUS_LAST_SLOT - MAC_NUBUS_FIRST_SLOT + 1)

I wasn't so keen on the verbosity of the above approach, however since both yourself 
and Zoltan have suggested a similar thing then I will see how it looks for v5.

>> +
>>       sysbus_init_mmio(sbd, &s->bus->super_slot_io);
>>       sysbus_init_mmio(sbd, &s->bus->slot_io);
>>   }
>> diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
>> index 5c13452308..404c1032e0 100644
>> --- a/hw/nubus/nubus-bus.c
>> +++ b/hw/nubus/nubus-bus.c
>> @@ -84,7 +84,7 @@ static void nubus_init(Object *obj)
>>                             nubus, "nubus-slots",
>>                             NUBUS_SLOT_NB * NUBUS_SLOT_SIZE);
>>   
>> -    nubus->current_slot = NUBUS_FIRST_SLOT;
>> +    nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
> 
> MAKE_64BIT_MASK(NUBUS_FIRST_SLOT, NUBUS_LAST_SLOT - NUBUS_FIRST_SLOT + 1) ?

Same here.

> And we define 16 slots, but NUBUS_SLOT_NB (above) is 15. (I think it's the value for Mac as last
> slot is 0xe)

If your suggested approach above works then I should be able to change NUBUS_SLOT_NB 
from 15 to 16 here with no other effect.

>>   }
>>   
>>   static void nubus_class_init(ObjectClass *oc, void *data)
>> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
>> index c1832f73da..d91a1e4af3 100644
>> --- a/hw/nubus/nubus-device.c
>> +++ b/hw/nubus/nubus-device.c
>> @@ -160,14 +160,35 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>>       NubusDevice *nd = NUBUS_DEVICE(dev);
>>       char *name;
>>       hwaddr slot_offset;
>> +    uint16_t s;
>> +
>> +    if (nd->slot == -1) {
>> +        /* No slot specified, find first available free slot */
>> +        s = ctz32(nubus->slot_available_mask);
>> +        if (s != 32) {
>> +            nd->slot = s;
>> +        } else {
>> +            error_setg(errp, "Cannot register nubus card, no free slot "
>> +                             "available");
>> +            return;
>> +        }
>> +    } else {
>> +        /* Slot specified, make sure the slot is available */
>> +        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
>> +            error_setg(errp, "Cannot register nubus card, slot %d is "
>> +                             "unavailable or already occupied", nd->slot);
>> +            return;
>> +        }
>> +    }
>>   
>> -    if (nubus->current_slot < NUBUS_FIRST_SLOT ||
>> -            nubus->current_slot > NUBUS_LAST_SLOT) {
>> -        error_setg(errp, "Cannot register nubus card, not enough slots");
>> +    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
>> +        error_setg(errp, "Cannot register nubus card, slot must be "
>> +                         "between %d and %d", NUBUS_FIRST_SLOT,
>> +                         NUBUS_LAST_SLOT);
> 
> Do we need this checking as we already checked the slot bit is available?
> Moreover it would be more accurate to rely on the bitmap as the first available slot differs between
> nubus and mac-nubus.

 From the discussion of earlier versions of the patchset, the intention was really to 
keep the old restriction as a failsafe: I'm happy to remove this for v5.

>>           return;
>>       }
>>   
>> -    nd->slot = nubus->current_slot++;
>> +    nubus->slot_available_mask &= ~BIT(nd->slot);
>>   
>>       /* Super */
>>       slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
>> diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
>> index 357f621d15..8ff4736259 100644
>> --- a/include/hw/nubus/nubus.h
>> +++ b/include/hw/nubus/nubus.h
>> @@ -19,7 +19,7 @@
>>   #define NUBUS_SLOT_SIZE       0x01000000
>>   #define NUBUS_SLOT_NB         0xF
>>   
>> -#define NUBUS_FIRST_SLOT      0x9
>> +#define NUBUS_FIRST_SLOT      0x0
>>   #define NUBUS_LAST_SLOT       0xF
>>   
>>   #define TYPE_NUBUS_DEVICE "nubus-device"
>> @@ -36,7 +36,7 @@ struct NubusBus {
>>       MemoryRegion super_slot_io;
>>       MemoryRegion slot_io;
>>   
>> -    int current_slot;
>> +    uint32_t slot_available_mask;
>>   };
>>   
>>   struct NubusDevice {
>>


ATB,

Mark.

Re: [PATCH v4 02/20] nubus-device: expose separate super slot memory region

[Mark Cave-Ayland]

On 20/09/2021 20:54, Laurent Vivier wrote:

> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>> According to "Designing Cards and Drivers for the Macintosh Family" each physical
>> nubus slot can access 2 separate address ranges: a super slot memory region which
>> is 256MB and a standard slot memory region which is 16MB.
>>
>> Currently a Nubus device uses the physical slot number to determine whether it is
>> using a standard slot memory region or a super slot memory region rather than
>> exposing both memory regions for use as required.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>>   hw/nubus/nubus-device.c  | 36 ++++++++++++++++++------------------
>>   include/hw/nubus/nubus.h |  1 +
>>   2 files changed, 19 insertions(+), 18 deletions(-)
>>
>> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
>> index be01269563..36203848e5 100644
>> --- a/hw/nubus/nubus-device.c
>> +++ b/hw/nubus/nubus-device.c
>> @@ -168,26 +168,26 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>>       }
>>   
>>       nd->slot = nubus->current_slot++;
>> -    name = g_strdup_printf("nubus-slot-%d", nd->slot);
>> -
>> -    if (nd->slot < NUBUS_FIRST_SLOT) {
>> -        /* Super */
>> -        slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
>> -
>> -        memory_region_init(&nd->slot_mem, OBJECT(dev), name,
>> -                           NUBUS_SUPER_SLOT_SIZE);
>> -        memory_region_add_subregion(&nubus->super_slot_io, slot_offset,
>> -                                    &nd->slot_mem);
>> -    } else {
>> -        /* Normal */
>> -        slot_offset = nd->slot * NUBUS_SLOT_SIZE;
>> -
>> -        memory_region_init(&nd->slot_mem, OBJECT(dev), name, NUBUS_SLOT_SIZE);
>> -        memory_region_add_subregion(&nubus->slot_io, slot_offset,
>> -                                    &nd->slot_mem);
>> -    }
>>   
>> +    /* Super */
>> +    slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
>> +
> 
> Is it possible to remove this patch?
> 
> The "(nd->slot - 6)" looks weird and it is removed in patch 20.

This is another place where I decided to keep the existing logic as-is and then make 
the change to remove the -6 offset later on in patch 12 ("nubus: move nubus to its 
own 32-bit address space").

Certainly the existing offset is wrong, but given that there are currently no devices 
that use the super slot then I will bring the change to remove the offset forward to 
this patch in v5.

> If not:
> 
> Reviewed-by: Laurent Vivier <laurent@vivier.eu>
> 
> Thanks,
> Laurent


ATB,

Mark.

Re: [PATCH v4 05/20] nubus: move slot bitmap checks from NubusDevice realize() to BusClass check_address()

[Mark Cave-Ayland]

On 20/09/2021 20:56, Laurent Vivier wrote:

> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>> Allow Nubus to manage the slot allocations itself using the BusClass check_address()
>> virtual function rather than managing this during NubusDevice realize().
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> ---
>>   hw/nubus/nubus-bus.c    | 37 +++++++++++++++++++++++++++++++++++++
>>   hw/nubus/nubus-device.c | 29 -----------------------------
>>   2 files changed, 37 insertions(+), 29 deletions(-)
>>
>> diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
>> index 404c1032e0..141876b579 100644
>> --- a/hw/nubus/nubus-bus.c
>> +++ b/hw/nubus/nubus-bus.c
>> @@ -87,11 +87,48 @@ static void nubus_init(Object *obj)
>>       nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);
>>   }
>>   
>> +static bool nubus_check_address(BusState *bus, DeviceState *dev, Error **errp)
>> +{
>> +    NubusDevice *nd = NUBUS_DEVICE(dev);
>> +    NubusBus *nubus = NUBUS_BUS(bus);
>> +    uint16_t s;
>> +
>> +    if (nd->slot == -1) {
>> +        /* No slot specified, find first available free slot */
>> +        s = ctz32(nubus->slot_available_mask);
>> +        if (s != 32) {
>> +            nd->slot = s;
>> +        } else {
>> +            error_setg(errp, "Cannot register nubus card, no free slot "
>> +                             "available");
>> +            return false;
>> +        }
>> +    } else {
>> +        /* Slot specified, make sure the slot is available */
>> +        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
>> +            error_setg(errp, "Cannot register nubus card, slot %d is "
>> +                             "unavailable or already occupied", nd->slot);
>> +            return false;
>> +        }
>> +    }
>> +
>> +    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
>> +        error_setg(errp, "Cannot register nubus card, slot must be "
>> +                         "between %d and %d", NUBUS_FIRST_SLOT,
>> +                         NUBUS_LAST_SLOT);
>> +        return false;
>> +    }
>> +
>> +    nubus->slot_available_mask &= ~BIT(nd->slot);
>> +    return true;
>> +}
>> +
>>   static void nubus_class_init(ObjectClass *oc, void *data)
>>   {
>>       BusClass *bc = BUS_CLASS(oc);
>>   
>>       bc->realize = nubus_realize;
>> +    bc->check_address = nubus_check_address;
>>   }
>>   
>>   static const TypeInfo nubus_bus_info = {
>> diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
>> index d91a1e4af3..7a32c8c95b 100644
>> --- a/hw/nubus/nubus-device.c
>> +++ b/hw/nubus/nubus-device.c
>> @@ -160,35 +160,6 @@ static void nubus_device_realize(DeviceState *dev, Error **errp)
>>       NubusDevice *nd = NUBUS_DEVICE(dev);
>>       char *name;
>>       hwaddr slot_offset;
>> -    uint16_t s;
>> -
>> -    if (nd->slot == -1) {
>> -        /* No slot specified, find first available free slot */
>> -        s = ctz32(nubus->slot_available_mask);
>> -        if (s != 32) {
>> -            nd->slot = s;
>> -        } else {
>> -            error_setg(errp, "Cannot register nubus card, no free slot "
>> -                             "available");
>> -            return;
>> -        }
>> -    } else {
>> -        /* Slot specified, make sure the slot is available */
>> -        if (!(nubus->slot_available_mask & BIT(nd->slot))) {
>> -            error_setg(errp, "Cannot register nubus card, slot %d is "
>> -                             "unavailable or already occupied", nd->slot);
>> -            return;
>> -        }
>> -    }
>> -
>> -    if (nd->slot < NUBUS_FIRST_SLOT || nd->slot > NUBUS_LAST_SLOT) {
>> -        error_setg(errp, "Cannot register nubus card, slot must be "
>> -                         "between %d and %d", NUBUS_FIRST_SLOT,
>> -                         NUBUS_LAST_SLOT);
>> -        return;
>> -    }
>> -
>> -    nubus->slot_available_mask &= ~BIT(nd->slot);
>>   
>>       /* Super */
>>       slot_offset = (nd->slot - 6) * NUBUS_SUPER_SLOT_SIZE;
>>
> 
> For the code move (but I think it needs some update in patch 4):
> 
> Reviewed-by: Laurent Vivier <laurent@vivier.eu>

Yes, that will be resolved by rebasing onto an updated patch 2.


ATB,

Mark.

Re: [PATCH v4 09/20] macfb: don't register declaration ROM

[Mark Cave-Ayland]

On 20/09/2021 21:01, Laurent Vivier wrote:

> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>> The macfb device is an on-board framebuffer and so is initialised by the
>> system declaration ROM included within the MacOS toolbox ROM.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> ---
>>   hw/display/macfb.c | 6 ------
>>   1 file changed, 6 deletions(-)
>>
>> diff --git a/hw/display/macfb.c b/hw/display/macfb.c
>> index d8183b9bbd..76808b69cc 100644
>> --- a/hw/display/macfb.c
>> +++ b/hw/display/macfb.c
>> @@ -383,10 +383,6 @@ static void macfb_sysbus_realize(DeviceState *dev, Error **errp)
>>       sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
>>   }
>>   
>> -const uint8_t macfb_rom[] = {
>> -    255, 0, 0, 0,
>> -};
>> -
>>   static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>>   {
>>       NubusDevice *nd = NUBUS_DEVICE(dev);
>> @@ -399,8 +395,6 @@ static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>>       macfb_common_realize(dev, ms, errp);
>>       memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, &ms->mem_ctrl);
>>       memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, &ms->mem_vram);
>> -
>> -    nubus_register_rom(nd, macfb_rom, sizeof(macfb_rom), 1, 9, 0xf);
>>   }
>>   
>>   static void macfb_sysbus_reset(DeviceState *d)
>>
> 
> Will macfb continue to work with "-kernel" and without providing any MacOS ROM?

Yes indeed, since on the Quadra 800 the declaration ROM for the framebuffer is 
embedded within the MacOS toolbox ROM.


ATB,

Mark.

Re: [PATCH v4 09/20] macfb: don't register declaration ROM

[BALATON Zoltan]

[-- Attachment #1: Type: text/plain, Size: 1915 bytes --]

On Wed, 22 Sep 2021, Mark Cave-Ayland wrote:
> On 20/09/2021 21:01, Laurent Vivier wrote:
>> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>>> The macfb device is an on-board framebuffer and so is initialised by the
>>> system declaration ROM included within the MacOS toolbox ROM.
>>> 
>>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>>> ---
>>>   hw/display/macfb.c | 6 ------
>>>   1 file changed, 6 deletions(-)
>>> 
>>> diff --git a/hw/display/macfb.c b/hw/display/macfb.c
>>> index d8183b9bbd..76808b69cc 100644
>>> --- a/hw/display/macfb.c
>>> +++ b/hw/display/macfb.c
>>> @@ -383,10 +383,6 @@ static void macfb_sysbus_realize(DeviceState *dev, 
>>> Error **errp)
>>>       sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
>>>   }
>>>   -const uint8_t macfb_rom[] = {
>>> -    255, 0, 0, 0,
>>> -};
>>> -
>>>   static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>>>   {
>>>       NubusDevice *nd = NUBUS_DEVICE(dev);
>>> @@ -399,8 +395,6 @@ static void macfb_nubus_realize(DeviceState *dev, 
>>> Error **errp)
>>>       macfb_common_realize(dev, ms, errp);
>>>       memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, 
>>> &ms->mem_ctrl);
>>>       memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, 
>>> &ms->mem_vram);
>>> -
>>> -    nubus_register_rom(nd, macfb_rom, sizeof(macfb_rom), 1, 9, 0xf);
>>>   }
>>>     static void macfb_sysbus_reset(DeviceState *d)
>>> 
>> 
>> Will macfb continue to work with "-kernel" and without providing any MacOS 
>> ROM?
>
> Yes indeed, since on the Quadra 800 the declaration ROM for the framebuffer 
> is embedded within the MacOS toolbox ROM.

Even if you want to boot Linux but have no toolbox ROM? (As the ROM is not 
free and thus not included with QEMU one can assume that's a common use 
case to boot Linux with -kernel but without -bios; I think that's what 
Laurent was asking about).

Regards,
BALATON Zoltan

Re: [PATCH v4 09/20] macfb: don't register declaration ROM

[Mark Cave-Ayland]

On 22/09/2021 12:15, BALATON Zoltan wrote:

> On Wed, 22 Sep 2021, Mark Cave-Ayland wrote:
>> On 20/09/2021 21:01, Laurent Vivier wrote:
>>> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>>>> The macfb device is an on-board framebuffer and so is initialised by the
>>>> system declaration ROM included within the MacOS toolbox ROM.
>>>>
>>>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>>>> ---
>>>>   hw/display/macfb.c | 6 ------
>>>>   1 file changed, 6 deletions(-)
>>>>
>>>> diff --git a/hw/display/macfb.c b/hw/display/macfb.c
>>>> index d8183b9bbd..76808b69cc 100644
>>>> --- a/hw/display/macfb.c
>>>> +++ b/hw/display/macfb.c
>>>> @@ -383,10 +383,6 @@ static void macfb_sysbus_realize(DeviceState *dev, Error 
>>>> **errp)
>>>>       sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
>>>>   }
>>>>   -const uint8_t macfb_rom[] = {
>>>> -    255, 0, 0, 0,
>>>> -};
>>>> -
>>>>   static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>>>>   {
>>>>       NubusDevice *nd = NUBUS_DEVICE(dev);
>>>> @@ -399,8 +395,6 @@ static void macfb_nubus_realize(DeviceState *dev, Error **errp)
>>>>       macfb_common_realize(dev, ms, errp);
>>>>       memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, &ms->mem_ctrl);
>>>>       memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, &ms->mem_vram);
>>>> -
>>>> -    nubus_register_rom(nd, macfb_rom, sizeof(macfb_rom), 1, 9, 0xf);
>>>>   }
>>>>     static void macfb_sysbus_reset(DeviceState *d)
>>>>
>>>
>>> Will macfb continue to work with "-kernel" and without providing any MacOS ROM?
>>
>> Yes indeed, since on the Quadra 800 the declaration ROM for the framebuffer is 
>> embedded within the MacOS toolbox ROM.
> 
> Even if you want to boot Linux but have no toolbox ROM? (As the ROM is not free and 
> thus not included with QEMU one can assume that's a common use case to boot Linux 
> with -kernel but without -bios; I think that's what Laurent was asking about).

Yes, correct. If you check earlier in the thread you can see Laurent confirms that no 
declaration ROM is present on a real Quadra 800. In the -kernel case all that happens 
is that the physical address of the framebuffer is passed to the kernel using 
bootinfo ready for use.


ATB,

Mark.

Re: [PATCH v4 17/20] nubus-bridge: make slot_available_mask a qdev property

[Mark Cave-Ayland]

On 20/09/2021 21:12, Laurent Vivier wrote:
> Le 17/09/2021 à 09:50, Mark Cave-Ayland a écrit :
>> This is to allow Macintosh machines to further specify which slots are available
>> since the number of addressable slots may not match the number of physical slots
>> present in the machine.
>>
>> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
>> ---
>>   hw/nubus/nubus-bridge.c | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
>> index 1adda7f5a6..2c7c4ee121 100644
>> --- a/hw/nubus/nubus-bridge.c
>> +++ b/hw/nubus/nubus-bridge.c
>> @@ -21,11 +21,18 @@ static void nubus_bridge_init(Object *obj)
>>       qbus_create_inplace(bus, sizeof(s->bus), TYPE_NUBUS_BUS, DEVICE(s), NULL);
>>   }
>>   
>> +static Property nubus_bridge_properties[] = {
>> +    DEFINE_PROP_UINT32("slot-available-mask", NubusBridge,
>> +                       bus.slot_available_mask, 0xffff),
> 
> So you can remove the "nubus->slot_available_mask = MAKE_64BIT_MASK(0, 16);" in nubus_init()?

Ah yes, I can do that in v5.

>> +    DEFINE_PROP_END_OF_LIST()
>> +};
>> +
>>   static void nubus_bridge_class_init(ObjectClass *klass, void *data)
>>   {
>>       DeviceClass *dc = DEVICE_CLASS(klass);
>>   
>>       dc->fw_name = "nubus";
>> +    device_class_set_props(dc, nubus_bridge_properties);
>>   }
>>   
>>   static const TypeInfo nubus_bridge_info = {
>>
> 
> Reviewed-by: Laurent Vivier <laurent@vivier.eu>


ATB,

Mark.