All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang3@mail.ustc.edu.cn>
To: linux-riscv <linux-riscv@lists.infradead.org>
Subject: [Request for help] issue when add relative extable support to riscv64
Date: Fri, 17 Sep 2021 23:57:33 +0800	[thread overview]
Message-ID: <20210917235733.6240d6d3@xhacker> (raw)

Hi,

Now the extable entry contains 16bytes for riscv64 -- 8bytes for the insn and
another 8bytes for the fixup. This wastes mem a bit. I think we can add
the relative extable support. A draft patch put at the end of this mail. But
I met abnormal build errors:

FATAL: modpost: The relocation at __ex_table+0x0 references
section "__ex_table" which is not executable, IOW
it is not possible for the kernel to fault
at that address.  Something is seriously wrong
and should be fixed.

I investigated this issue but didn't find any clue. Any suggestion
is appreciated!

Thanks

diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild
index 445ccc97305a..57b86fd9916c 100644
--- a/arch/riscv/include/asm/Kbuild
+++ b/arch/riscv/include/asm/Kbuild
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 generic-y += early_ioremap.h
-generic-y += extable.h
 generic-y += flat.h
 generic-y += kvm_para.h
 generic-y += user.h
diff --git a/arch/riscv/include/asm/futex.h b/arch/riscv/include/asm/futex.h
index 1b00badb9f87..b220b8387c9d 100644
--- a/arch/riscv/include/asm/futex.h
+++ b/arch/riscv/include/asm/futex.h
@@ -31,8 +31,8 @@
 	"	jump 2b,%[t]				\n"	\
 	"	.previous				\n"	\
 	"	.section __ex_table,\"a\"		\n"	\
-	"	.balign " RISCV_SZPTR "			\n"	\
-	"	" RISCV_PTR " 1b, 3b			\n"	\
+	"	.balign 4			\n"	\
+	"	.word (1b-.), (3b-.)			\n"	\
 	"	.previous				\n"	\
 	: [r] "+r" (ret), [ov] "=&r" (oldval),			\
 	  [u] "+m" (*uaddr), [t] "=&r" (tmp)			\
@@ -104,9 +104,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	jump 3b,%[t]				\n"
 	"	.previous				\n"
 	"	.section __ex_table,\"a\"		\n"
-	"	.balign " RISCV_SZPTR "			\n"
-	"	" RISCV_PTR " 1b, 4b			\n"
-	"	" RISCV_PTR " 2b, 4b			\n"
+	"	.balign 4 			\n"
+	"	.word (1b-.), (4b-.)			\n"
+	"	.word (2b-.), (4b-.)			\n"
 	"	.previous				\n"
 	: [r] "+r" (ret), [v] "=&r" (val), [u] "+m" (*uaddr), [t] "=&r" (tmp)
 	: [ov] "Jr" (oldval), [nv] "Jr" (newval), [e] "i" (-EFAULT)
diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h
index f314ff44c48d..097ed3df9b17 100644
--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@@ -94,8 +94,8 @@ do {								\
 		"	jump 2b, %2\n"				\
 		"	.previous\n"				\
 		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 3b\n"			\
+		"	.balign 4 \n"			\
+		"	.word (1b - .), (3b - .)\n"			\
 		"	.previous"				\
 		: "+r" (err), "=&r" (__x), "=r" (__tmp)		\
 		: "m" (*(ptr)), "i" (-EFAULT));			\
@@ -126,9 +126,9 @@ do {								\
 		"	jump 3b, %3\n"				\
 		"	.previous\n"				\
 		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 4b\n"			\
-		"	" RISCV_PTR " 2b, 4b\n"			\
+		"	.balign 4 \n"			\
+		"	.word (1b - .), (4b - .)\n"			\
+		"	.word (2b - .), (4b - .)\n"			\
 		"	.previous"				\
 		: "+r" (err), "=&r" (__lo), "=r" (__hi),	\
 			"=r" (__tmp)				\
@@ -234,8 +234,8 @@ do {								\
 		"	jump 2b, %1\n"				\
 		"	.previous\n"				\
 		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 3b\n"			\
+		"	.balign 4 \n"			\
+		"	.word (1b - .), (3b - .)\n"			\
 		"	.previous"				\
 		: "+r" (err), "=r" (__tmp), "=m" (*(ptr))	\
 		: "rJ" (__x), "i" (-EFAULT));			\
@@ -263,9 +263,9 @@ do {								\
 		"	jump 3b, %1\n"				\
 		"	.previous\n"				\
 		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 4b\n"			\
-		"	" RISCV_PTR " 2b, 4b\n"			\
+		"	.balign 4 \n"			\
+		"	.word (1b - .), (4b - .)\n"			\
+		"	.word (2b - .), (4b - .)\n"			\
 		"	.previous"				\
 		: "+r" (err), "=r" (__tmp),			\
 			"=m" (__ptr[__LSW]),			\
@@ -418,8 +418,8 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
 		"	jump 1b, %[rc]\n"			\
 		".previous\n"					\
 		".section __ex_table,\"a\"\n"			\
-		".balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 2b\n"			\
+		".balign 4 \n"			\
+		".word (1b-.), (2b-.)\n"			\
 		".previous\n"					\
 			: [ret] "=&r" (__ret),			\
 			  [rc]  "=&r" (__rc),			\
@@ -444,8 +444,8 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
 		"	jump 1b, %[rc]\n"			\
 		".previous\n"					\
 		".section __ex_table,\"a\"\n"			\
-		".balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 2b\n"			\
+		".balign 4 \n"			\
+		".word (1b-.), (2b-.)\n"			\
 		".previous\n"					\
 			: [ret] "=&r" (__ret),			\
 			  [rc]  "=&r" (__rc),			\
diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S
index 63bc691cff91..b346ecb2a051 100644
--- a/arch/riscv/lib/uaccess.S
+++ b/arch/riscv/lib/uaccess.S
@@ -7,8 +7,8 @@
 100:
 	\op \reg, \addr
 	.section __ex_table,"a"
-	.balign RISCV_SZPTR
-	RISCV_PTR 100b, \lbl
+	.balign 4
+	.word (100b - .), (\lbl - .)
 	.previous
 	.endm
 
diff --git a/arch/riscv/mm/extable.c b/arch/riscv/mm/extable.c
index 2fc729422151..6aa8ffac4be7 100644
--- a/arch/riscv/mm/extable.c
+++ b/arch/riscv/mm/extable.c
@@ -17,7 +17,7 @@ int fixup_exception(struct pt_regs *regs)
 
 	fixup = search_exception_tables(regs->epc);
 	if (fixup) {
-		regs->epc = fixup->fixup;
+		regs->epc = (unsigned long)&fixup->fixup + fixup->fixup;
 		return 1;
 	}
 	return 0;


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2021-09-17 16:04 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-17 15:57 Jisheng Zhang [this message]
2021-09-17 16:26 ` [Request for help] issue when add relative extable support to riscv64 Jisheng Zhang
2021-09-18  1:23   ` Kefeng Wang
2021-09-18 14:20     ` Jisheng Zhang
2021-10-10 15:56 ` Jisheng Zhang
2021-10-10 16:59   ` Andreas Schwab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210917235733.6240d6d3@xhacker \
    --to=jszhang3@mail.ustc.edu.cn \
    --cc=linux-riscv@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.