From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: linux-pci@vger.kernel.org
Cc: lorenzo.pieralisi@arm.com, john@phrozen.org,
devicetree@vger.kernel.org, tsbogend@alpha.franken.de,
bhelgaas@google.com, matthias.bgg@gmail.com,
gregkh@linuxfoundation.org, linux-mips@vger.kernel.org,
linux-staging@lists.linux.dev, neil@brown.name,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/3] PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver
Date: Wed, 22 Sep 2021 07:00:34 +0200 [thread overview]
Message-ID: <20210922050035.18162-3-sergio.paracuellos@gmail.com> (raw)
In-Reply-To: <20210922050035.18162-1-sergio.paracuellos@gmail.com>
Add driver for the PCIe controller of the MT7621 SoC.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
arch/mips/ralink/Kconfig | 3 +-
drivers/pci/controller/Kconfig | 8 ++
drivers/pci/controller/Makefile | 1 +
.../controller}/pci-mt7621.c | 0
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/mt7621-pci/Kconfig | 8 --
drivers/staging/mt7621-pci/Makefile | 2 -
drivers/staging/mt7621-pci/TODO | 4 -
.../mt7621-pci/mediatek,mt7621-pci.txt | 104 ------------------
10 files changed, 11 insertions(+), 122 deletions(-)
rename drivers/{staging/mt7621-pci => pci/controller}/pci-mt7621.c (100%)
delete mode 100644 drivers/staging/mt7621-pci/Kconfig
delete mode 100644 drivers/staging/mt7621-pci/Makefile
delete mode 100644 drivers/staging/mt7621-pci/TODO
delete mode 100644 drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index c800bf5559b5..120adad51d6a 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -51,7 +51,8 @@ choice
select SYS_SUPPORTS_HIGHMEM
select MIPS_GIC
select CLKSRC_MIPS_GIC
- select HAVE_PCI if PCI_MT7621
+ select HAVE_PCI
+ select PCI_DRIVERS_GENERIC
select SOC_BUS
endchoice
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 326f7d13024f..b76404be0360 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -312,6 +312,14 @@ config PCIE_HISI_ERR
Say Y here if you want error handling support
for the PCIe controller's errors on HiSilicon HIP SoCs
+config PCI_MT7621
+ tristate "MediaTek MT7621 PCI Controller"
+ depends on (RALINK && SOC_MT7621) || (MIPS && COMPILE_TEST)
+ select PHY_MT7621_PCI
+ default SOC_MT7621
+ help
+ This selects a driver for the MediaTek MT7621 PCI Controller.
+
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
source "drivers/pci/controller/cadence/Kconfig"
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index aaf30b3dcc14..f42a566353cb 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_VMD) += vmd.o
obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
+obj-$(CONFIG_PCI_MT7621) += pci-mt7621.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
obj-y += mobiveil/
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/pci/controller/pci-mt7621.c
similarity index 100%
rename from drivers/staging/mt7621-pci/pci-mt7621.c
rename to drivers/pci/controller/pci-mt7621.c
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index e03627ad4460..59af251e7576 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -86,8 +86,6 @@ source "drivers/staging/vc04_services/Kconfig"
source "drivers/staging/pi433/Kconfig"
-source "drivers/staging/mt7621-pci/Kconfig"
-
source "drivers/staging/mt7621-dma/Kconfig"
source "drivers/staging/ralink-gdma/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index c7f8d8d8dd11..76f413470bc8 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_KS7010) += ks7010/
obj-$(CONFIG_GREYBUS) += greybus/
obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
obj-$(CONFIG_PI433) += pi433/
-obj-$(CONFIG_PCI_MT7621) += mt7621-pci/
obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
obj-$(CONFIG_DMA_RALINK) += ralink-gdma/
obj-$(CONFIG_SOC_MT7621) += mt7621-dts/
diff --git a/drivers/staging/mt7621-pci/Kconfig b/drivers/staging/mt7621-pci/Kconfig
deleted file mode 100644
index ce58042f2f21..000000000000
--- a/drivers/staging/mt7621-pci/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config PCI_MT7621
- tristate "MediaTek MT7621 PCI Controller"
- depends on RALINK
- select PCI_DRIVERS_GENERIC
- help
- This selects a driver for the MediaTek MT7621 PCI Controller.
-
diff --git a/drivers/staging/mt7621-pci/Makefile b/drivers/staging/mt7621-pci/Makefile
deleted file mode 100644
index f4e651cf7ce3..000000000000
--- a/drivers/staging/mt7621-pci/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PCI_MT7621) += pci-mt7621.o
diff --git a/drivers/staging/mt7621-pci/TODO b/drivers/staging/mt7621-pci/TODO
deleted file mode 100644
index d674a9ac85c1..000000000000
--- a/drivers/staging/mt7621-pci/TODO
+++ /dev/null
@@ -1,4 +0,0 @@
-
-- general code review and cleanup
-
-Cc: NeilBrown <neil@brown.name>
diff --git a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt b/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
deleted file mode 100644
index 327a68267309..000000000000
--- a/drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-MediaTek MT7621 PCIe controller
-
-Required properties:
-- compatible: "mediatek,mt7621-pci"
-- device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
-- bus-range: Range of bus numbers associated with this controller.
-- #address-cells: Address representation for root ports (must be 3)
-- pinctrl-names : The pin control state names.
-- pinctrl-0: The "default" pinctrl state.
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Ranges for the PCI memory and I/O regions.
-- #interrupt-cells: Must be 1
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties.
- Please refer to the standard PCI bus binding document for a more detailed
- explanation.
-- status: either "disabled" or "okay".
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
- root ports.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
- root ports.
-- reset-gpios: GPIO specs for the reset pins.
-
-In addition, the device tree node must have sub-nodes describing each PCIe port
-interface, having the following mandatory properties:
-
-Required properties:
-- reg: Only the first four bytes are used to refer to the correct bus number
- and device number.
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
- property is sufficient.
-- bus-range: Range of bus numbers associated with this port.
-
-Example for MT7621:
-
- pcie: pcie@1e140000 {
- compatible = "mediatek,mt7621-pci";
- reg = <0x1e140000 0x100 /* host-pci bridge registers */
- 0x1e142000 0x100 /* pcie port 0 RC control registers */
- 0x1e143000 0x100 /* pcie port 1 RC control registers */
- 0x1e144000 0x100>; /* pcie port 2 RC control registers */
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pins>;
-
- device_type = "pci";
-
- bus-range = <0 255>;
- ranges = <
- 0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
- 0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
- >;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0xF0000 0 0 1>;
- interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
- <0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
- <0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
-
- status = "disabled";
-
- resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
- reset-names = "pcie0", "pcie1", "pcie2";
- clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
- clock-names = "pcie0", "pcie1", "pcie2";
-
- reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
- <&gpio 8 GPIO_ACTIVE_LOW>,
- <&gpio 7 GPIO_ACTIVE_LOW>;
-
- pcie@0,0 {
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- bus-range = <0x00 0xff>;
- };
-
- pcie@1,0 {
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- bus-range = <0x00 0xff>;
- };
-
- pcie@2,0 {
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- bus-range = <0x00 0xff>;
- };
- };
-
--
2.25.1
next prev parent reply other threads:[~2021-09-22 5:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-22 5:00 [PATCH v3 0/3] PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver Sergio Paracuellos
2021-09-22 5:00 ` [PATCH v3 1/3] dt-bindings: mt7621-pci: PCIe binding documentation for MT7621 SoCs Sergio Paracuellos
2021-09-22 5:00 ` Sergio Paracuellos [this message]
2021-10-13 13:05 ` [PATCH v3 2/3] PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver Lorenzo Pieralisi
2021-10-13 13:35 ` Sergio Paracuellos
2021-09-22 5:00 ` [PATCH v3 3/3] MAINTAINERS: add myself as maintainer of the MT7621 PCI " Sergio Paracuellos
2021-09-22 9:05 ` Sergei Shtylyov
2021-10-03 16:55 ` Sergio Paracuellos
2021-10-03 16:55 ` Sergio Paracuellos
2021-10-20 14:23 ` [PATCH v3 0/3] PCI: mt7621: Add MediaTek MT7621 PCIe host " Lorenzo Pieralisi
2021-10-20 14:56 ` Sergio Paracuellos
2021-10-21 15:52 ` Bjorn Helgaas
2021-10-21 17:27 ` Sergio Paracuellos
2021-10-21 18:11 ` Bjorn Helgaas
2021-10-21 19:23 ` Sergio Paracuellos
2021-10-22 8:34 ` Lorenzo Pieralisi
2021-10-22 9:13 ` Sergio Paracuellos
2021-10-25 21:12 ` Bjorn Helgaas
2021-10-26 5:49 ` Sergio Paracuellos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210922050035.18162-3-sergio.paracuellos@gmail.com \
--to=sergio.paracuellos@gmail.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=john@phrozen.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=lorenzo.pieralisi@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=neil@brown.name \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.